A segmentation fault was trigged by executing 'ipmitool fru internaluse 1 info'.
A memset() was attempted on the address of a pointer, not on the pointer itself.
The erroneous memset() is removed with this commit because it duplicates
the memset() in line 4072.
Resolvesipmitool/ipmitool#9
Signed-off-by: Kylix Lo <kylix0713@gmail.com>
Commit 58d510f90feb ("ID : 103 picmg discover messages should
be DEBUG, not INFO") changed picmg discover messages from DEBUG
to INFO. However, commit f1c6118c722b ("ID:320 - Add VITA 46.11
support") reverted this without explanation.
This patch reverts the picmg discover messages back to DEBUG.
Prior to this commit, ipmitool had hard-coded list
of OEM Vendor IDs that it recognized.
With this commit, the list is fetched directly from
IANA PEN registry at build time, so that each release
will now contain an up-to-date list of vendors.
Only basic ASCII characters are supported now. Any
Unicode or extended ASCII will be either transliterated
(cyrillic and diacritic) or simply removed (chinese).
Closes:
ID:491 https://sourceforge.net/p/ipmitool/bugs/491/
ID:505 https://sourceforge.net/p/ipmitool/bugs/505/
Signed-off-by: Alexander Amelkin <alexander@amelkin.msk.ru>
Fix the Most recent Addition/Erase date are not matched between in-band and
out-band.
ipmitool SDR code doesn't have to check for valid date to print
based on 'Delete SDR command supported' and 'Partial Add SDR command
supported', if 0xffffffff is taken. Also 'Timestamp' data type needs to change
to time_t(long) because same data type is using for gmtime(time_t) API, it has
different behaviour for Linux and Windows C.
IPMI tool coredumps due to changes introduced in ID:461. This shouldn't be
surprise as a NULL pointer is passed to init. Commit addresses this issue by
calling EVP_CIPHER_CTX_new() instead of EVP_CIPHER_CTX_init(), which is
deprecated, and by checking return value of call to former function.
The previously introduced mechanism of generating
a git revision was only using the abbreviated hash.
That approach doesn't give a clue whether version
1.8.18.2c99bf6 is newer or older than 1.8.18.7f8d374.
The project uses tags, so `git describe` can be
employed to produce an incremental revision number
since the last tag. Version 1.8.18.13 is much more
understandable and comparable. Howerver that doesn't
answer the question "what codebase was used". To
address that, the abbreviated hash should also be
preserved. Hence, this commit introduces a new
versioning scheme like `1.8.18.13.gee01aa5`.
For git snapshots when git program is absent the
version will be like `1.8.18.0.gsnapshot`.
For cases when .git directory is missing (Release
compilation?) the suffix part will be omitted
completely yielding a version like `1.8.18`.
The suffix generation has been moved to the added
csv-revision script. The script is absolutely
POSIX-ly correct and doesn't require XSI or any
other POSIX extensions.
The get_fru_area_str() function is used to decode FRU area
fields into text. Areas may be encoded as text, binary,
BCDplus or 6-bit ASCII. Decoding of 6-bit ASCII and BCDplus
was broken. There was an error in the formulas used to
calculate the resulting string length, plus the decoding
formulas for BCDplus was wrong.
For BCDplus the resulting length was considered equal
the encoded data length, while in fact it's twice as big.
Only one character instead of two was being extracted from
a single input byte while two nibbles must have been taken
into account.
For 6-bit ASCII rounding of 3 to 4 bytes conversion was done
improperly adding 2 to the original length instead of the
result of multiplication.
Ekanalyzer was not reading the type/length byte for the 2nd and
subsequent custom fields. Also the message it displayed when
lacked data for custom fields was very relaxing and incorrect.
Got rid of the field decoding code that was only capable of
processing ASCII and binary fields, and switched to using
get_fru_area_str() that can also decode BCDplus and 6-bit ASCII
and maybe will eventually be enabled to decode Unicode text
as well.
This is the first step to completely get rid of the completely
awfully written FRU data decoding functionality of ekanalyzer
that essentially duplicates that of ipmi_fru.c module.
Replace the static 'csv' suffix with a short hash
and a 'dirty' mark (when the tree is modified).
When git is not available, '.git_snapshot' suffix
will be used.
Currently, when a LAN parameter set command is sent through ipmitool, the
corresponding parameter data is requested and compared to the command to verify
that the data was written correctly. Since we do send the VLAN ID in this return
data, regardless of whether VLAN is disabled or not, this mismatch between
requested and received parameters causes ipmitool to retry the command 10 times
and return an error.
ipmitool is sending "0x00 0x00" reading back data from BMC as "0x01 0x00" which
is NOT matching & hence pops up the error /warning "LAN Parameter Data does not
match! Write may have failed."
After 10 retries when we check "ipmitool lan print" VLAN ID is disabled
successfully.
c&p from the ticket:
~~~
When I try to use CVS-ipmitool on Ubuntu 8.04 x86_64 to talk to a SuperMicros
SIMSO-HTC (Rev. 2.5, IPMI 2.0) chip on a X7SBi-Board via SOL I often get doubled
characters when typing fast, making the SOL interface basically unusable for
anyone accustomed to using a keyboard for longer than a month ;)
At first I thought this was an issue with SuperMicros implementation of the
protocol and/or the flow control
setup on the machine, but their own app works fine (but not the Linux CLI, which
is maybe
based on ipmitool?). But after reading the IPMI 2.0 SOL specs and watching the
debug output for a bit, it seems that is really an issue with lanplus-SOL
protocol implentation of ipmitool in general.
Specifically, in lanplus.c:ipmi_lanplus_send_payload, when waiting for a SOL
response the case that a non SOL packet is returned is not being
checked. Also the "if (is_sol_packet(rsp) && rsp->data_len)" branch does
terminate with a break, but instead goes for a send try, that seems
counterintuitive, Both these things cause doubled characters for me.
The attached patch seems to solve these issues in my case, but I don't claim to
fully understand your protocol code and/or the protocol, so maybe it will cause
problems elsewhere, especially under packet loss conditions.
~~~
Commit implements `Enable status` which shows/is in alignment with (22.27) Get
User Access Command and displays User ID Enable/Disable status of given User ID
at given channel.
PICMG 3.1 R2.0 introduces new a new Link Class field in the FRU
Link Descriptors which is the upper 4 bits of the Link Type field.
This new Link Class field specifies SERDES lanes with 10.3125Gbd
signalling rate.
It also introduces the new Base-KX and Base-KX4 types which are the
new IEEE replacements for the PICMG 3.0 Base-BX and Base-BX4 types.
This patch decodes these new types and fields and will print out
proper descriptions for each one based on PICMG 3.1 R2.0
PICMG extension 5(UTCA, MicroTCA) is not detected as valid extension.
The following patch fixes that at one place. In the second place the board type
is detected in a similar way, but it isn't clear if a patch is needed there, too.
In the new version of ipmitool 1.8.15 and above, sol deactivate command was not
closing the session, This patch is to fix close console session When we issue
sol deactivate command.
