Currently, when a LAN parameter set command is sent through ipmitool, the
corresponding parameter data is requested and compared to the command to verify
that the data was written correctly. Since we do send the VLAN ID in this return
data, regardless of whether VLAN is disabled or not, this mismatch between
requested and received parameters causes ipmitool to retry the command 10 times
and return an error.
ipmitool is sending "0x00 0x00" reading back data from BMC as "0x01 0x00" which
is NOT matching & hence pops up the error /warning "LAN Parameter Data does not
match! Write may have failed."
After 10 retries when we check "ipmitool lan print" VLAN ID is disabled
successfully.
Commit implements `Enable status` which shows/is in alignment with (22.27) Get
User Access Command and displays User ID Enable/Disable status of given User ID
at given channel.
PICMG 3.1 R2.0 introduces new a new Link Class field in the FRU
Link Descriptors which is the upper 4 bits of the Link Type field.
This new Link Class field specifies SERDES lanes with 10.3125Gbd
signalling rate.
It also introduces the new Base-KX and Base-KX4 types which are the
new IEEE replacements for the PICMG 3.0 Base-BX and Base-BX4 types.
This patch decodes these new types and fields and will print out
proper descriptions for each one based on PICMG 3.1 R2.0
PICMG extension 5(UTCA, MicroTCA) is not detected as valid extension.
The following patch fixes that at one place. In the second place the board type
is detected in a similar way, but it isn't clear if a patch is needed there, too.
In the new version of ipmitool 1.8.15 and above, sol deactivate command was not
closing the session, This patch is to fix close console session When we issue
sol deactivate command.
Commit adds a check as a workaround for segfault reported in ID:335. However,
the proper fix is to rewrite parts of lib/ipmi_hpmfwupg.c not to put whole
firmware image into memory. Also, MD5 checksum part needs to be rewritten,
because it won't work for large firmware images.
Commit adds a check as a workaround for segfault reported in ID:335. However,
the proper fix is to rewrite parts of lib/ipmi_hpmfwupg.c not to put whole
firmware image into memory. Also, MD5 checksum part needs to be rewritten,
because it won't work for large firmware images.
The netfn structures are populated sequentially in the _gather_info
function and they are accessed only by even indices (and to the double
of its real length). This results in a segmentation fault if you run
* ipmitool firewall reset
This patch fixes the behaviour so that the ipmi_firewall_reset function
treats the structure the same way as the rest of the code does.
Signed-off-by: Boris Ranto <branto@redhat.com>
Commit adds support for cipher suites 6/7/8 (HMAC-MD5) and cipher
suites 15/16/17 (HMAC_SHA256).
This also fixes:
* ID:442 - IPMI_AUTH_RAKP_HMAC_MD5 support in lanplus
* ID:141 - RMCP+ Cipher-suite 17 not supported
Original author Liebig Holger(Fujitsu).
Code cleanup done by Florian Breu and Zdenek Styblik.
Reworked event type code/sensor type parsing in order to support
VITA-specific extensions. Added VITA-specific sensor-specific event
types and VITA-specific sensor types.
Commit re-works user interface of PEF module as well as internal functions.
Not all of the functionality is implemented as the main aim was interface
layout.
It's possible this commit introduces some breaking changes.
Changes are based on patch submitted by Jordan Hargrave, Dell Inc.
The events can be removed as desired on certain machines so the only way
to get the proper last X events is to traverse them all not outputting
the first NR_EVENTS - X events.
Signed-off-by: Boris Ranto <branto@redhat.com>
Commit adds check of response's data_len in ipmi_sel_get_info() as returned data
length is unconditional. If incorrect, resp. short, data_len is returned, we
might end up reading memory at places we're not supposed to.
Presently 'sel time set' doesn't account 'minute' difference between timezone.
So depending on host timezone it may set time to +/-30 mins. This patch adds
minute difference to delta_hour caluclation so that it sets time properly.
output without patch:
# ./ipmitool sel time get
03/24/2016 12:34:03
# ./ipmitool sel time set "03/24/2016 12:34:03"
03/24/2016 12:04:03
# ./ipmitool sel time get
03/24/2016 12:06:09
output with patch:
# ./ipmitool sel time get
03/30/2016 08:49:47
# ./ipmitool sel time set "03/30/2016 08:09:47"
03/30/2016 08:09:47
# ./ipmitool sel get
03/30/2016 08:09:57
Signed-off-by: Vasant Hegde <hegdevasant@linux.vnet.ibm.com>
