Commit adds option to 'user set password' to choose whether password should be
stored as 16 byte or 20 byte. From now on, it's possible to store even 5 bytes
long password as 20 byte password which should make it useless for IPMI v1.5
auth/sessions.
Despite the fact we could leave this up to IPMI stack, we won't do that.
Therefore, is_ipmi_user_priv_limit() is added and user provided value checked.
Add support for the "System Firmware Version" parameter selector (1) to the "Get
System Info Parameters" command ("mc getsysinfo system_fw_version"). The "mc
getsysinfo" command was already implemented and supported, but strangely, only
standard parameter selecter values 2, 3, 4 and Dell-defined parameters were
supported; the standard parameter value 1 (system firmare version) was not
supported.
'lib/ipmi_sdradd.c' ipmi_sdr_read_records() opens a file descriptor and never
closes it. Here is a patch in use by SGI for quite some time now. Suggested
patch attached.
Bug 325 was associated with identification of DDR4 SDRAM, but correct decoding
logic was necessary to actually support DDR4 decode. This commit adds the
necessary logic to decode and display DDR4 DIMMS.
Currently, the HPM.1 agent in the IPMItool does not differ between Rollback
support and Deferred Activation Support. The patch fixes up this bug.
Commit for Dmitry Bazhenov
1. Warnings about "FRU Area Length" based on uninitialized (malloc'd) memory
contents (due to fru->max_read_size not being initialized, left at 0) and
fru_data not being zeroed after malloc() in ipmi_fru_set_field_string().
2. "fru edit" commands for any field index other than 0 would fail (with "Field
not found !" error) due to a couple offset and length calculation errors (for
all the supported "area" types) in ipmi_fru_set_field_string().
3. "fru edit" commands would corrupt the FRU Inventory Area due to incorrect
"source offset" value being specified in write_fru_area() call in
impi_fru_set_field_string().
Commit for Rob Swindell
max_inbound_payload_size, max_outbound_payload_size and port are
assembled byte by byte using shifts. This works correctly in both
little and big endian and doing a subsequent byte swap is wrong.
To highlight this issue I dumped the values on a big endian machine:
max_inbound_payload_size 51200
max_outbound_payload_size 51200
port 28418
And after this fix:
max_inbound_payload_size 200
max_outbound_payload_size 200
port 623
Signed-off-by: Zdenek Styblik <stybla@turnovfree.net>
Main changes include:
* direct connection to ILOM command line interface
* ability to add/delete ssh keys fot ILOM users
* ability to set ILOM properties
* ability to retrieve various logs from SP
* removal of obsolete/non-functioning code and other misc changes
Commit for Martin Hovorka of Oracle
From the ticket:
(v1.8.12) "dcmi power set_limit action <value>" (where <value> is either
"sel_logging" or "power_off") does not actually send the "Set Power Limit"
command (so no change to the power limit policy is made).
This was caused by all atoi(), strtol(), strtoul() calls being replaced. This
patch should fix it.
Commit for Holger Liebig
This patch adds basic long message support for PICMG-based systems according to
the HPM.2 specification.
It also introduces APIs for setting inbound and outbound messages sizes per
selected interface.
This APIs are used in LAN and LAN+ interfaces to set autonomously detected
inbound and outbound message sizes.
The newly introduced APIs also replace the existing message size detection code
in several ipmitool commands in order to leverage the advantages of long message
support (HPM.1 upgrade, SDR acquring, FRU inventory read and write).
The Kontron-specific long message support is moved under a OEM option.
Commit for Dmitry Bazhenov
