ipmitool/lib/ipmi_chassis.c
Jiang Junyu 6e037d6bfb Refactor string comparisons
Clean up use of strcmp/strncmp/strncasecmp for command line arguments.
Never use anything but `strcmp()` unless absolutely neccessary.

Partialy resolves ipmitool/ipmitool#104
2020-06-10 13:46:57 +03:00

2114 lines
53 KiB
C

/*
* Copyright (c) 2003 Sun Microsystems, Inc. All Rights Reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* Redistribution of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
*
* Redistribution in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* Neither the name of Sun Microsystems, Inc. or the names of
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* This software is provided "AS IS," without a warranty of any kind.
* ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND WARRANTIES,
* INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A
* PARTICULAR PURPOSE OR NON-INFRINGEMENT, ARE HEREBY EXCLUDED.
* SUN MICROSYSTEMS, INC. ("SUN") AND ITS LICENSORS SHALL NOT BE LIABLE
* FOR ANY DAMAGES SUFFERED BY LICENSEE AS A RESULT OF USING, MODIFYING
* OR DISTRIBUTING THIS SOFTWARE OR ITS DERIVATIVES. IN NO EVENT WILL
* SUN OR ITS LICENSORS BE LIABLE FOR ANY LOST REVENUE, PROFIT OR DATA,
* OR FOR DIRECT, INDIRECT, SPECIAL, CONSEQUENTIAL, INCIDENTAL OR
* PUNITIVE DAMAGES, HOWEVER CAUSED AND REGARDLESS OF THE THEORY OF
* LIABILITY, ARISING OUT OF THE USE OF OR INABILITY TO USE THIS SOFTWARE,
* EVEN IF SUN HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
*/
#include <stdlib.h>
#include <string.h>
#include <stdio.h>
#include <time.h>
#include <errno.h>
#include <limits.h>
#include <ipmitool/bswap.h>
#include <ipmitool/helper.h>
#include <ipmitool/ipmi.h>
#include <ipmitool/log.h>
#include <ipmitool/ipmi_intf.h>
#include <ipmitool/ipmi_strings.h>
#include <ipmitool/ipmi_chassis.h>
#include <ipmitool/ipmi_time.h>
#define CHASSIS_BOOT_MBOX_IANA_SZ 3
#define CHASSIS_BOOT_MBOX_BLOCK_SZ 16
#define CHASSIS_BOOT_MBOX_BLOCK0_SZ \
(CHASSIS_BOOT_MBOX_BLOCK_SZ - CHASSIS_BOOT_MBOX_IANA_SZ)
#define CHASSIS_BOOT_MBOX_MAX_BLOCK 0xFF
#define CHASSIS_BOOT_MBOX_MAX_BLOCKS (CHASSIS_BOOT_MBOX_MAX_BLOCK + 1)
/* Get/Set system boot option boot flags bit definitions */
/* Boot flags byte 1 bits */
#define BF1_VALID_SHIFT 7
#define BF1_INVALID 0
#define BF1_VALID (1 << BF1_VALID_SHIFT)
#define BF1_VALID_MASK BF1_VALID
#define BF1_PERSIST_SHIFT 6
#define BF1_ONCE 0
#define BF1_PERSIST (1 << BF1_PERSIST_SHIFT)
#define BF1_PERSIST_MASK BF1_PERSIST
#define BF1_BOOT_TYPE_SHIFT 5
#define BF1_BOOT_TYPE_LEGACY 0
#define BF1_BOOT_TYPE_EFI (1 << BF1_BOOT_TYPE_SHIFT)
#define BF1_BOOT_TYPE_MASK BF1_BOOT_TYPE_EFI
/* Boot flags byte 2 bits */
#define BF2_CMOS_CLEAR_SHIFT 7
#define BF2_CMOS_CLEAR (1 << BF2_CMOS_CLEAR_SHIFT)
#define BF2_CMOS_CLEAR_MASK BF2_CMOS_CLEAR
#define BF2_KEYLOCK_SHIFT 6
#define BF2_KEYLOCK (1 << BF2_KEYLOCK_SHIFT)
#define BF2_KEYLOCK_MASK BF2_KEYLOCK
#define BF2_BOOTDEV_SHIFT 2
#define BF2_BOOTDEV_DEFAULT (0 << BF2_BOOTDEV_SHIFT)
#define BF2_BOOTDEV_PXE (1 << BF2_BOOTDEV_SHIFT)
#define BF2_BOOTDEV_HDD (2 << BF2_BOOTDEV_SHIFT)
#define BF2_BOOTDEV_HDD_SAFE (3 << BF2_BOOTDEV_SHIFT)
#define BF2_BOOTDEV_DIAG_PART (4 << BF2_BOOTDEV_SHIFT)
#define BF2_BOOTDEV_CDROM (5 << BF2_BOOTDEV_SHIFT)
#define BF2_BOOTDEV_SETUP (6 << BF2_BOOTDEV_SHIFT)
#define BF2_BOOTDEV_REMOTE_FDD (7 << BF2_BOOTDEV_SHIFT)
#define BF2_BOOTDEV_REMOTE_CDROM (8 << BF2_BOOTDEV_SHIFT)
#define BF2_BOOTDEV_REMOTE_PRIMARY_MEDIA (9 << BF2_BOOTDEV_SHIFT)
#define BF2_BOOTDEV_REMOTE_HDD (11 << BF2_BOOTDEV_SHIFT)
#define BF2_BOOTDEV_FDD (15 << BF2_BOOTDEV_SHIFT)
#define BF2_BOOTDEV_MASK (0xF << BF2_BOOTDEV_SHIFT)
#define BF2_BLANK_SCREEN_SHIFT 1
#define BF2_BLANK_SCREEN (1 << BF2_BLANK_SCREEN_SHIFT)
#define BF2_BLANK_SCREEN_MASK BF2_BLANK_SCREEN
#define BF2_RESET_LOCKOUT_SHIFT 0
#define BF2_RESET_LOCKOUT (1 << BF2_RESET_LOCKOUT_SHIFT)
#define BF2_RESET_LOCKOUT_MASK BF2_RESET_LOCKOUT
/* Boot flags byte 3 bits */
#define BF3_POWER_LOCKOUT_SHIFT 7
#define BF3_POWER_LOCKOUT (1 << BF3_POWER_LOCKOUT_SHIFT)
#define BF3_POWER_LOCKOUT_MASK BF3_POWER_LOCKOUT
#define BF3_VERBOSITY_SHIFT 5
#define BF3_VERBOSITY_DEFAULT (0 << BF3_VERBOSITY_SHIFT)
#define BF3_VERBOSITY_QUIET (1 << BF3_VERBOSITY_SHIFT)
#define BF3_VERBOSITY_VERBOSE (2 << BF3_VERBOSITY_SHIFT)
#define BF3_VERBOSITY_MASK (3 << BF3_VERBOSITY_SHIFT)
#define BF3_EVENT_TRAPS_SHIFT 4
#define BF3_EVENT_TRAPS (1 << BF3_EVENT_TRAPS_SHIFT)
#define BF3_EVENT_TRAPS_MASK BF3_EVENT_TRAPS
#define BF3_PASSWD_BYPASS_SHIFT 3
#define BF3_PASSWD_BYPASS (1 << BF3_PASSWD_BYPASS_SHIFT)
#define BF3_PASSWD_BYPASS_MASK BF3_PASSWD_BYPASS
#define BF3_SLEEP_LOCKOUT_SHIFT 2
#define BF3_SLEEP_LOCKOUT (1 << BF3_SLEEP_LOCKOUT_SHIFT)
#define BF3_SLEEP_LOCKOUT_MASK BF3_SLEEP_LOCKOUT
#define BF3_CONSOLE_REDIR_SHIFT 0
#define BF3_CONSOLE_REDIR_DEFAULT (0 << BF3_CONSOLE_REDIR_SHIFT)
#define BF3_CONSOLE_REDIR_SUPPRESS (1 << BF3_CONSOLE_REDIR_SHIFT)
#define BF3_CONSOLE_REDIR_ENABLE (2 << BF3_CONSOLE_REDIR_SHIFT)
#define BF3_CONSOLE_REDIR_MASK (3 << BF3_CONSOLE_REDIR_SHIFT)
/* Boot flags byte 4 bits */
#define BF4_SHARED_MODE_SHIFT 3
#define BF4_SHARED_MODE (1 << BF4_SHARED_MODE_SHIFT)
#define BF4_SHARED_MODE_MASK BF4_SHARED_MODE
#define BF4_BIOS_MUX_SHIFT 0
#define BF4_BIOS_MUX_DEFAULT (0 << BF4_BIOS_MUX_SHIFT)
#define BF4_BIOS_MUX_BMC (1 << BF4_BIOS_MUX_SHIFT)
#define BF4_BIOS_MUX_SYSTEM (2 << BF4_BIOS_MUX_SHIFT)
#define BF4_BIOS_MUX_MASK (7 << BF4_BIOS_MUX_SHIFT)
typedef struct {
uint8_t iana[CHASSIS_BOOT_MBOX_IANA_SZ];
uint8_t data[CHASSIS_BOOT_MBOX_BLOCK0_SZ];
} mbox_b0_data_t;
typedef struct {
uint8_t block;
union {
uint8_t data[CHASSIS_BOOT_MBOX_BLOCK_SZ];
mbox_b0_data_t b0;
};
} mbox_t;
extern int verbose;
static const struct valstr get_bootparam_cc_vals[] = {
{ 0x80, "Unsupported parameter" },
{ 0x00, NULL }
};
static const struct valstr set_bootparam_cc_vals[] = {
{ 0x80, "Unsupported parameter" },
{ 0x81, "Attempt to set 'in progress' while not in 'complete' state" },
{ 0x82, "Parameter is read-only" },
{ 0x00, NULL }
};
int
ipmi_chassis_power_status(struct ipmi_intf * intf)
{
struct ipmi_rs * rsp;
struct ipmi_rq req;
memset(&req, 0, sizeof(req));
req.msg.netfn = IPMI_NETFN_CHASSIS;
req.msg.cmd = 0x1;
req.msg.data_len = 0;
rsp = intf->sendrecv(intf, &req);
if (!rsp) {
lprintf(LOG_ERR, "Unable to get Chassis Power Status");
return -1;
}
if (rsp->ccode) {
lprintf(LOG_ERR, "Get Chassis Power Status failed: %s",
val2str(rsp->ccode, completion_code_vals));
return -1;
}
return rsp->data[0] & 1;
}
static int
ipmi_chassis_print_power_status(struct ipmi_intf * intf)
{
int ps = ipmi_chassis_power_status(intf);
if (ps < 0)
return -1;
printf("Chassis Power is %s\n", ps ? "on" : "off");
return 0;
}
int
ipmi_chassis_power_control(struct ipmi_intf * intf, uint8_t ctl)
{
struct ipmi_rs * rsp;
struct ipmi_rq req;
memset(&req, 0, sizeof(req));
req.msg.netfn = IPMI_NETFN_CHASSIS;
req.msg.cmd = 0x2;
req.msg.data = &ctl;
req.msg.data_len = 1;
rsp = intf->sendrecv(intf, &req);
if (!rsp) {
lprintf(LOG_ERR, "Unable to set Chassis Power Control to %s",
val2str(ctl, ipmi_chassis_power_control_vals));
return -1;
}
if (rsp->ccode) {
lprintf(LOG_ERR, "Set Chassis Power Control to %s failed: %s",
val2str(ctl, ipmi_chassis_power_control_vals),
val2str(rsp->ccode, completion_code_vals));
return -1;
}
printf("Chassis Power Control: %s\n",
val2str(ctl, ipmi_chassis_power_control_vals));
return 0;
}
static int
ipmi_chassis_identify(struct ipmi_intf * intf, char * arg)
{
struct ipmi_rq req;
struct ipmi_rs * rsp;
int rc = (-3);
struct {
uint8_t interval;
uint8_t force_on;
} identify_data = { .interval = 0, .force_on = 0 };
memset(&req, 0, sizeof(req));
req.msg.netfn = IPMI_NETFN_CHASSIS;
req.msg.cmd = 0x4;
if (arg) {
if (!strcmp(arg, "force")) {
identify_data.force_on = 1;
} else {
if ( (rc = str2uchar(arg, &identify_data.interval)) != 0) {
if (rc == (-2)) {
lprintf(LOG_ERR, "Invalid interval given.");
} else {
lprintf(LOG_ERR, "Given interval is too big.");
}
return (-1);
}
}
req.msg.data = (uint8_t *)&identify_data;
/* The Force Identify On byte is optional and not
* supported by all devices-- if force is not specified,
* we pass only one data byte; if specified, we pass two
* data bytes and check for an error completion code
*/
req.msg.data_len = (identify_data.force_on) ? 2 : 1;
}
rsp = intf->sendrecv(intf, &req);
if (!rsp) {
lprintf(LOG_ERR, "Unable to set Chassis Identify");
return -1;
}
if (rsp->ccode) {
lprintf(LOG_ERR, "Set Chassis Identify failed: %s",
val2str(rsp->ccode, completion_code_vals));
if (identify_data.force_on != 0) {
/* Intel SE7501WV2 F/W 1.2 returns CC 0xC7, but
* the IPMI v1.5 spec does not standardize a CC
* if unsupported, so we warn
*/
lprintf(LOG_WARNING, "Chassis may not support Force Identify On\n");
}
return -1;
}
printf("Chassis identify interval: ");
if (!arg) {
printf("default (15 seconds)\n");
} else {
if (identify_data.force_on != 0) {
printf("indefinite\n");
} else {
if (identify_data.interval == 0)
printf("off\n");
else
printf("%i seconds\n", identify_data.interval);
}
}
return 0;
}
static int
ipmi_chassis_poh(struct ipmi_intf * intf)
{
struct ipmi_rs * rsp;
struct ipmi_rq req;
uint8_t mins_per_count;
uint32_t count;
float minutes;
uint32_t days, hours;
memset(&req, 0, sizeof(req));
req.msg.netfn = IPMI_NETFN_CHASSIS;
req.msg.cmd = 0xf;
rsp = intf->sendrecv(intf, &req);
if (!rsp) {
lprintf(LOG_ERR, "Unable to get Chassis Power-On-Hours");
return -1;
}
if (rsp->ccode) {
lprintf(LOG_ERR, "Get Chassis Power-On-Hours failed: %s",
val2str(rsp->ccode, completion_code_vals));
return -1;
}
mins_per_count = rsp->data[0];
memcpy(&count, rsp->data+1, 4);
#if WORDS_BIGENDIAN
count = BSWAP_32(count);
#endif
minutes = (float)count * mins_per_count;
days = minutes / 1440;
minutes -= (float)days * 1440;
hours = minutes / 60;
minutes -= hours * 60;
if (mins_per_count < 60) {
printf("POH Counter : %i days, %i hours, %li minutes\n",
days, hours, (long)minutes);
} else {
printf("POH Counter : %i days, %i hours\n", days, hours);
}
return 0;
}
static int
ipmi_chassis_restart_cause(struct ipmi_intf * intf)
{
struct ipmi_rs * rsp;
struct ipmi_rq req;
memset(&req, 0, sizeof(req));
req.msg.netfn = IPMI_NETFN_CHASSIS;
req.msg.cmd = 0x7;
rsp = intf->sendrecv(intf, &req);
if (!rsp) {
lprintf(LOG_ERR, "Unable to get Chassis Restart Cause");
return -1;
}
if (rsp->ccode) {
lprintf(LOG_ERR, "Get Chassis Restart Cause failed: %s",
val2str(rsp->ccode, completion_code_vals));
return -1;
}
printf("System restart cause: ");
switch (rsp->data[0] & 0xf) {
case 0:
printf("unknown\n");
break;
case 1:
printf("chassis power control command\n");
break;
case 2:
printf("reset via pushbutton\n");
break;
case 3:
printf("power-up via pushbutton\n");
break;
case 4:
printf("watchdog expired\n");
break;
case 5:
printf("OEM\n");
break;
case 6:
printf("power-up due to always-restore power policy\n");
break;
case 7:
printf("power-up due to restore-previous power policy\n");
break;
case 8:
printf("reset via PEF\n");
break;
case 9:
printf("power-cycle via PEF\n");
break;
default:
printf("invalid\n");
}
return 0;
}
int
ipmi_chassis_status(struct ipmi_intf * intf)
{
struct ipmi_rs * rsp;
struct ipmi_rq req;
memset(&req, 0, sizeof(req));
req.msg.netfn = IPMI_NETFN_CHASSIS;
req.msg.cmd = 0x1;
rsp = intf->sendrecv(intf, &req);
if (!rsp) {
lprintf(LOG_ERR, "Error sending Chassis Status command");
return -1;
}
if (rsp->ccode) {
lprintf(LOG_ERR, "Error sending Chassis Status command: %s",
val2str(rsp->ccode, completion_code_vals));
return -1;
}
/* byte 1 */
printf("System Power : %s\n", (rsp->data[0] & 0x1) ? "on" : "off");
printf("Power Overload : %s\n", (rsp->data[0] & 0x2) ? "true" : "false");
printf("Power Interlock : %s\n", (rsp->data[0] & 0x4) ? "active" : "inactive");
printf("Main Power Fault : %s\n", (rsp->data[0] & 0x8) ? "true" : "false");
printf("Power Control Fault : %s\n", (rsp->data[0] & 0x10) ? "true" : "false");
printf("Power Restore Policy : ");
switch ((rsp->data[0] & 0x60) >> 5) {
case 0x0:
printf("always-off\n");
break;
case 0x1:
printf("previous\n");
break;
case 0x2:
printf("always-on\n");
break;
case 0x3:
default:
printf("unknown\n");
}
/* byte 2 */
printf("Last Power Event : ");
if (rsp->data[1] & 0x1)
printf("ac-failed ");
if (rsp->data[1] & 0x2)
printf("overload ");
if (rsp->data[1] & 0x4)
printf("interlock ");
if (rsp->data[1] & 0x8)
printf("fault ");
if (rsp->data[1] & 0x10)
printf("command");
printf("\n");
/* byte 3 */
printf("Chassis Intrusion : %s\n", (rsp->data[2] & 0x1) ? "active" : "inactive");
printf("Front-Panel Lockout : %s\n", (rsp->data[2] & 0x2) ? "active" : "inactive");
printf("Drive Fault : %s\n", (rsp->data[2] & 0x4) ? "true" : "false");
printf("Cooling/Fan Fault : %s\n", (rsp->data[2] & 0x8) ? "true" : "false");
if (rsp->data_len > 3) {
/* optional byte 4 */
if (rsp->data[3] == 0) {
printf("Front Panel Control : none\n");
} else {
printf("Sleep Button Disable : %s\n", (rsp->data[3] & 0x80) ? "allowed" : "not allowed");
printf("Diag Button Disable : %s\n", (rsp->data[3] & 0x40) ? "allowed" : "not allowed");
printf("Reset Button Disable : %s\n", (rsp->data[3] & 0x20) ? "allowed" : "not allowed");
printf("Power Button Disable : %s\n", (rsp->data[3] & 0x10) ? "allowed" : "not allowed");
printf("Sleep Button Disabled: %s\n", (rsp->data[3] & 0x08) ? "true" : "false");
printf("Diag Button Disabled : %s\n", (rsp->data[3] & 0x04) ? "true" : "false");
printf("Reset Button Disabled: %s\n", (rsp->data[3] & 0x02) ? "true" : "false");
printf("Power Button Disabled: %s\n", (rsp->data[3] & 0x01) ? "true" : "false");
}
}
return 0;
}
static int
ipmi_chassis_selftest(struct ipmi_intf * intf)
{
struct ipmi_rs * rsp;
struct ipmi_rq req;
memset(&req, 0, sizeof(req));
req.msg.netfn = IPMI_NETFN_APP;
req.msg.cmd = 0x4;
rsp = intf->sendrecv(intf, &req);
if (!rsp) {
lprintf(LOG_ERR, "Error sending Get Self Test command");
return -1;
}
if (rsp->ccode) {
lprintf(LOG_ERR, "Error sending Get Self Test command: %s",
val2str(rsp->ccode, completion_code_vals));
return -1;
}
printf("Self Test Results : ");
switch (rsp->data[0]) {
case 0x55:
printf("passed\n");
break;
case 0x56:
printf("not implemented\n");
break;
case 0x57:
{
int i;
const struct valstr broken_dev_vals[] = {
{ 0, "firmware corrupted" },
{ 1, "boot block corrupted" },
{ 2, "FRU Internal Use Area corrupted" },
{ 3, "SDR Repository empty" },
{ 4, "IPMB not responding" },
{ 5, "cannot access BMC FRU" },
{ 6, "cannot access SDR Repository" },
{ 7, "cannot access SEL Device" },
{ 0xff, NULL },
};
printf("device error\n");
for (i=0; i<8; i++) {
if (rsp->data[1] & (1<<i)) {
printf(" [%s]\n",
val2str(i, broken_dev_vals));
}
}
}
break;
case 0x58:
printf("Fatal hardware error: %02xh\n", rsp->data[1]);
break;
default:
printf("Device-specific failure %02xh:%02xh\n",
rsp->data[0], rsp->data[1]);
break;
}
return 0;
}
static int
ipmi_chassis_set_bootparam(struct ipmi_intf * intf,
uint8_t param, void *data, int len)
{
struct ipmi_rs * rsp;
struct ipmi_rq req;
struct {
uint8_t param;
uint8_t data[];
} *msg_data;
int rc = -1;
size_t msgsize = 1 + len; /* Single-byte parameter plus the data */
static const uint8_t BOOTPARAM_MASK = 0x7F;
msg_data = malloc(msgsize);
if (!msg_data) {
goto out;
}
memset(msg_data, 0, msgsize);
msg_data->param = param & BOOTPARAM_MASK;
memcpy(msg_data->data, data, len);
memset(&req, 0, sizeof(req));
req.msg.netfn = IPMI_NETFN_CHASSIS;
req.msg.cmd = 0x8;
req.msg.data = (uint8_t *)msg_data;
req.msg.data_len = msgsize;
rsp = intf->sendrecv(intf, &req);
if (!rsp) {
lprintf(LOG_ERR, "Error setting Chassis Boot Parameter %d", param);
return -1;
}
rc = rsp->ccode;
if (rc) {
if (param != 0) {
lprintf(LOG_ERR,
"Set Chassis Boot Parameter %d failed: %s",
param,
specific_val2str(rsp->ccode,
set_bootparam_cc_vals,
completion_code_vals));
}
goto out;
}
lprintf(LOG_DEBUG, "Chassis Set Boot Parameter %d to %s", param, buf2str(data, len));
out:
free_n(&msg_data);
return rc;
}
/* Flags to ipmi_chassis_get_bootparam() */
typedef enum {
PARAM_NO_GENERIC_INFO, /* Do not print generic boot parameter info */
PARAM_NO_DATA_DUMP, /* Do not dump parameter data */
PARAM_NO_RANGE_ERROR, /* Do not report out of range info to user */
PARAM_SPECIFIC /* Parameter-specific flags start with this */
} chassis_bootparam_flags_t;
/* Flags to ipmi_chassis_get_bootparam() for Boot Mailbox parameter (7) */
typedef enum {
MBOX_PARSE_USE_TEXT = PARAM_SPECIFIC, /* Use text output vs. hex */
MBOX_PARSE_ALLBLOCKS /* Parse all blocks, not just one */
} chassis_bootmbox_parse_t;
#define BP_FLAG(x) (1 << (x))
static
void
chassis_bootmailbox_parse(void *buf, size_t len, int flags)
{
void *blockdata;
size_t datalen;
bool use_text = flags & BP_FLAG(MBOX_PARSE_USE_TEXT);
bool all_blocks = flags & BP_FLAG(MBOX_PARSE_ALLBLOCKS);
mbox_t *mbox;
if (!buf || !len) {
return;
}
mbox = buf;
blockdata = mbox->data;
datalen = len - sizeof(mbox->block);
if (!all_blocks) {
/* Print block selector only if a single block is printed */
printf(" Selector : %d\n", mbox->block);
}
if (!mbox->block) {
uint32_t iana = ipmi24toh(mbox->b0.iana);
/* For block zero print the IANA Private Enterprise Number */
printf(" IANA PEN : %" PRIu32 " [%s]\n",
iana,
val2str(iana, ipmi_oem_info));
blockdata = mbox->b0.data;
datalen -= sizeof(mbox->b0.iana);
}
printf(" Block ");
if (all_blocks) {
printf("%3" PRIu8 " Data : ", mbox->block);
}
else {
printf("Data : ");
}
if (use_text) {
/* Ensure the data string is null-terminated */
unsigned char text[CHASSIS_BOOT_MBOX_BLOCK_SZ + 1] = { 0 };
memcpy(text, blockdata, datalen);
printf("'%s'\n", text);
}
else {
printf("%s\n", buf2str(blockdata, datalen));
}
}
static int
ipmi_chassis_get_bootparam(struct ipmi_intf * intf,
int argc, char *argv[], int flags)
{
struct ipmi_rs * rsp;
struct ipmi_rq req;
uint8_t msg_data[3];
uint8_t param_id = 0;
bool skip_generic = flags & BP_FLAG(PARAM_NO_GENERIC_INFO);
bool skip_data = flags & BP_FLAG(PARAM_NO_DATA_DUMP);
bool skip_range = flags & BP_FLAG(PARAM_NO_RANGE_ERROR);
int rc = -1;
if (argc < 1 || !argv[0]) {
goto out;
}
if (str2uchar(argv[0], &param_id)) {
lprintf(LOG_ERR,
"Invalid parameter '%s' given instead of bootparam.",
argv[0]);
goto out;
}
--argc;
++argv;
memset(msg_data, 0, 3);
msg_data[0] = param_id & 0x7f;
if (argc) {
if (str2uchar(argv[0], &msg_data[1])) {
lprintf(LOG_ERR,
"Invalid argument '%s' given to"
" bootparam %" PRIu8,
argv[0], msg_data[1]);
goto out;
}
}
memset(&req, 0, sizeof(req));
req.msg.netfn = IPMI_NETFN_CHASSIS;
req.msg.cmd = 0x9;
req.msg.data = msg_data;
req.msg.data_len = 3;
rsp = intf->sendrecv(intf, &req);
if (!rsp) {
lprintf(LOG_ERR,
"Error Getting Chassis Boot Parameter %" PRIu8,
msg_data[0]);
return -1;
}
if (IPMI_CC_PARAM_OUT_OF_RANGE == rsp->ccode && skip_range) {
return -1;
}
if (rsp->ccode) {
lprintf(LOG_ERR,
"Get Chassis Boot Parameter %" PRIu8 " failed: %s",
msg_data[0],
specific_val2str(rsp->ccode,
get_bootparam_cc_vals,
completion_code_vals));
return -1;
}
if (verbose > 2)
printbuf(rsp->data, rsp->data_len, "Boot Option");
param_id = 0;
param_id = (rsp->data[1] & 0x7f);
if (!skip_generic) {
printf("Boot parameter version: %d\n", rsp->data[0]);
printf("Boot parameter %d is %s\n", rsp->data[1] & 0x7f,
(rsp->data[1] & 0x80)
? "invalid/locked"
: "valid/unlocked");
if (!skip_data) {
printf("Boot parameter data: %s\n",
buf2str(rsp->data+2, rsp->data_len - 2));
}
}
switch(param_id)
{
case 0:
{
printf(" Set In Progress : ");
switch((rsp->data[2]) &0x03)
{
case 0: printf("set complete\n"); break;
case 1: printf("set in progress\n"); break;
case 2: printf("commit write\n"); break;
default: printf("error, reserved bit\n"); break;
}
}
break;
case 1:
{
printf(" Service Partition Selector : ");
if((rsp->data[2]) == 0)
{
printf("unspecified\n");
}
else
{
printf("%d\n",(rsp->data[2]));
}
}
break;
case 2:
{
printf( " Service Partition Scan :\n");
if((rsp->data[2]&0x03) != 0)
{
if((rsp->data[2]&0x01) == 0x01)
printf(" - Request BIOS to scan\n");
if((rsp->data[2]&0x02) == 0x02)
printf(" - Service Partition Discovered\n");
}
else
{
printf(" No flag set\n");
}
}
break;
case 3:
{
printf( " BMC boot flag valid bit clearing :\n");
if((rsp->data[2]&0x1f) != 0)
{
if((rsp->data[2]&0x10) == 0x10)
printf(" - Don't clear valid bit on reset/power cycle cause by PEF\n");
if((rsp->data[2]&0x08) == 0x08)
printf(" - Don't automatically clear boot flag valid bit on timeout\n");
if((rsp->data[2]&0x04) == 0x04)
printf(" - Don't clear valid bit on reset/power cycle cause by watchdog\n");
if((rsp->data[2]&0x02) == 0x02)
printf(" - Don't clear valid bit on push button reset // soft reset\n");
if((rsp->data[2]&0x01) == 0x01)
printf(" - Don't clear valid bit on power up via power push button or wake event\n");
}
else
{
printf(" No flag set\n");
}
}
break;
case 4:
{
printf( " Boot Info Acknowledge :\n");
if((rsp->data[3]&0x1f) != 0)
{
if((rsp->data[3]&0x10) == 0x10)
printf(" - OEM has handled boot info\n");
if((rsp->data[3]&0x08) == 0x08)
printf(" - SMS has handled boot info\n");
if((rsp->data[3]&0x04) == 0x04)
printf(" - OS // service partition has handled boot info\n");
if((rsp->data[3]&0x02) == 0x02)
printf(" - OS Loader has handled boot info\n");
if((rsp->data[3]&0x01) == 0x01)
printf(" - BIOS/POST has handled boot info\n");
}
else
{
printf(" No flag set\n");
}
}
break;
case 5:
{
printf( " Boot Flags :\n");
if(rsp->data[2] & BF1_VALID)
printf(" - Boot Flag Valid\n");
else
printf(" - Boot Flag Invalid\n");
if(rsp->data[2] & BF1_PERSIST)
printf(" - Options apply to all future boots\n");
else
printf(" - Options apply to only next boot\n");
if(rsp->data[2] & BF1_BOOT_TYPE_EFI)
printf(" - BIOS EFI boot \n");
else
printf(" - BIOS PC Compatible (legacy) boot \n");
if(rsp->data[3] & BF2_CMOS_CLEAR)
printf(" - CMOS Clear\n");
if(rsp->data[3] & BF2_KEYLOCK)
printf(" - Lock Keyboard\n");
printf(" - Boot Device Selector : ");
switch(rsp->data[3] & BF2_BOOTDEV_MASK)
{
case BF2_BOOTDEV_DEFAULT:
printf("No override\n");
break;
case BF2_BOOTDEV_PXE:
printf("Force PXE\n");
break;
case BF2_BOOTDEV_HDD:
printf("Force Boot from default Hard-Drive\n");
break;
case BF2_BOOTDEV_HDD_SAFE:
printf("Force Boot from default Hard-Drive, "
"request Safe-Mode\n");
break;
case BF2_BOOTDEV_DIAG_PART:
printf("Force Boot from Diagnostic Partition\n");
break;
case BF2_BOOTDEV_CDROM:
printf("Force Boot from CD/DVD\n");
break;
case BF2_BOOTDEV_SETUP:
printf("Force Boot into BIOS Setup\n");
break;
case BF2_BOOTDEV_REMOTE_FDD:
printf("Force Boot from remotely connected "
"Floppy/primary removable media\n");
break;
case BF2_BOOTDEV_REMOTE_CDROM:
printf("Force Boot from remotely connected "
"CD/DVD\n");
break;
case BF2_BOOTDEV_REMOTE_PRIMARY_MEDIA:
printf("Force Boot from primary remote media\n");
break;
case BF2_BOOTDEV_REMOTE_HDD:
printf("Force Boot from remotely connected "
"Hard-Drive\n");
break;
case BF2_BOOTDEV_FDD:
printf("Force Boot from Floppy/primary "
"removable media\n");
break;
default:
printf("Flag error\n");
break;
}
if(rsp->data[3] & BF2_BLANK_SCREEN)
printf(" - Screen blank\n");
if(rsp->data[3] & BF2_RESET_LOCKOUT)
printf(" - Lock out Reset buttons\n");
if(rsp->data[4] & BF3_POWER_LOCKOUT)
printf(" - Lock out (power off/sleep "
"request) via Power Button\n");
printf(" - BIOS verbosity : ");
switch(rsp->data[4] & BF3_VERBOSITY_MASK)
{
case BF3_VERBOSITY_DEFAULT:
printf("System Default\n");
break;
case BF3_VERBOSITY_QUIET:
printf("Request Quiet Display\n");
break;
case BF3_VERBOSITY_VERBOSE:
printf("Request Verbose Display\n");
break;
default:
printf("Flag error\n");
break;
}
if(rsp->data[4] & BF3_EVENT_TRAPS)
printf(" - Force progress event traps\n");
if(rsp->data[4] & BF3_PASSWD_BYPASS)
printf(" - User password bypass\n");
if(rsp->data[4] & BF3_SLEEP_LOCKOUT)
printf(" - Lock Out Sleep Button\n");
printf(" - Console Redirection control : ");
switch(rsp->data[4] & BF3_CONSOLE_REDIR_MASK)
{
case BF3_CONSOLE_REDIR_DEFAULT:
printf(
"Console redirection occurs per BIOS "
"configuration setting (default)\n");
break;
case BF3_CONSOLE_REDIR_SUPPRESS:
printf("Suppress (skip) console redirection "
"if enabled\n");
break;
case BF3_CONSOLE_REDIR_ENABLE:
printf("Request console redirection be "
"enabled\n");
break;
default:
printf("Flag error\n");
break;
}
if(rsp->data[5] & BF4_SHARED_MODE)
printf(" - BIOS Shared Mode Override\n");
printf(" - BIOS Mux Control Override : ");
switch (rsp->data[5] & BF4_BIOS_MUX_MASK) {
case BF4_BIOS_MUX_DEFAULT:
printf("BIOS uses recommended setting of the "
"mux at the end of POST\n");
break;
case BF4_BIOS_MUX_BMC:
printf(
"Requests BIOS to force mux to BMC at "
"conclusion of POST/start of OS boot\n");
break;
case BF4_BIOS_MUX_SYSTEM:
printf(
"Requests BIOS to force mux to system "
"at conclusion of POST/start of "
"OS boot\n");
break;
default:
printf("Flag error\n");
break;
}
}
break;
case 6:
{
unsigned long session_id;
uint32_t timestamp;
session_id = ((unsigned long) rsp->data[3]);
session_id |= (((unsigned long) rsp->data[4])<<8);
session_id |= (((unsigned long) rsp->data[5])<<16);
session_id |= (((unsigned long) rsp->data[6])<<24);
timestamp = ipmi32toh(&rsp->data[7]);
printf(" Boot Initiator Info :\n");
printf(" Channel Number : %d\n", (rsp->data[2] & 0x0f));
printf(" Session Id : %08lXh\n",session_id);
printf(" Timestamp : %s\n", ipmi_timestamp_numeric(timestamp));
}
break;
case 7:
chassis_bootmailbox_parse(rsp->data + 2,
rsp->data_len - 2,
flags);
break;
default:
printf(" Unsupported parameter %" PRIu8 "\n", param_id);
break;
}
rc = IPMI_CC_OK;
out:
return rc;
}
static int
get_bootparam_options(char *optstring,
unsigned char *set_flag, unsigned char *clr_flag)
{
char *token;
char *saveptr = NULL;
int optionError = 0;
*set_flag = 0;
*clr_flag = 0;
static struct {
char *name;
unsigned char value;
char *desc;
} options[] = {
{"PEF", 0x10,
"Clear valid bit on reset/power cycle cause by PEF"},
{"timeout", 0x08,
"Automatically clear boot flag valid bit on timeout"},
{"watchdog", 0x04,
"Clear valid bit on reset/power cycle cause by watchdog"},
{"reset", 0x02,
"Clear valid bit on push button reset/soft reset"},
{"power", 0x01,
"Clear valid bit on power up via power push button or wake event"},
{NULL} /* End marker */
}, *op;
if (strcmp(optstring, "options=") != 0) {
lprintf(LOG_ERR, "No options= keyword found \"%s\"", optstring);
return -1;
}
token = strtok_r(optstring + 8, ",", &saveptr);
while (token) {
int setbit = 0;
if (strcmp(token, "help") == 0) {
optionError = 1;
break;
}
if (strcmp(token, "no-") == 0) {
setbit = 1;
token += 3;
}
for (op = options; op->name; ++op) {
if (strcmp(token, op->name) == 0) {
if (setbit) {
*set_flag |= op->value;
} else {
*clr_flag |= op->value;
}
break;
}
}
if (!op->name) {
/* Option not found */
optionError = 1;
if (setbit) {
token -=3;
}
lprintf(LOG_ERR, "Invalid option: %s", token);
}
token = strtok_r(NULL, ",", &saveptr);
}
if (optionError) {
lprintf(LOG_NOTICE, " Legal options are:");
lprintf(LOG_NOTICE, " %-8s: print this message", "help");
for (op = options; op->name; ++op) {
lprintf(LOG_NOTICE, " %-8s: %s", op->name, op->desc);
}
lprintf(LOG_NOTICE, " Any Option may be prepended with no-"
" to invert sense of operation\n");
return (-1);
}
return (0);
}
static int
ipmi_chassis_get_bootvalid(struct ipmi_intf * intf)
{
struct ipmi_rs * rsp;
struct ipmi_rq req;
uint8_t msg_data[3];
uint8_t param_id = IPMI_CHASSIS_BOOTPARAM_FLAG_VALID;
memset(msg_data, 0, 3);
msg_data[0] = param_id & 0x7f;
msg_data[1] = 0;
msg_data[2] = 0;
memset(&req, 0, sizeof(req));
req.msg.netfn = IPMI_NETFN_CHASSIS;
req.msg.cmd = 0x9;
req.msg.data = msg_data;
req.msg.data_len = 3;
rsp = intf->sendrecv(intf, &req);
if (!rsp) {
lprintf(LOG_ERR,
"Error Getting Chassis Boot Parameter %d", param_id);
return -1;
}
if (rsp->ccode) {
lprintf(LOG_ERR, "Get Chassis Boot Parameter %d failed: %s",
param_id,
specific_val2str(rsp->ccode,
get_bootparam_cc_vals,
completion_code_vals));
return -1;
}
if (verbose > 2)
printbuf(rsp->data, rsp->data_len, "Boot Option");
return(rsp->data[2]);
}
typedef enum {
SET_COMPLETE,
SET_IN_PROGRESS,
COMMIT_WRITE,
RESERVED
} progress_t;
static
void
chassis_bootparam_set_in_progress(struct ipmi_intf *intf, progress_t progress)
{
/*
* By default try to set/clear set-in-progress parameter before/after
* changing any boot parameters. If setting fails, the code will set
* this flag to false and stop trying to fiddle with it for future
* requests.
*/
static bool use_progress = true;
uint8_t flag = progress;
int rc;
if (!use_progress) {
return;
}
rc = ipmi_chassis_set_bootparam(intf,
IPMI_CHASSIS_BOOTPARAM_SET_IN_PROGRESS,
&flag, 1);
/*
* Only disable future checks if set in progress status setting failed.
* Setting of other statuses may fail legitimately.
*/
if (rc && SET_IN_PROGRESS == progress) {
use_progress = false;
}
}
typedef enum {
BIOS_POST_ACK = 1 << 0,
OS_LOADER_ACK = 1 << 1,
OS_SERVICE_PARTITION_ACK = 1 << 2,
SMS_ACK = 1 << 3,
OEM_ACK = 1 << 4,
RESERVED_ACK_MASK = 7 << 5
} bootinfo_ack_t;
static
int
chassis_bootparam_clear_ack(struct ipmi_intf *intf, bootinfo_ack_t flag)
{
uint8_t flags[2] = { flag & ~RESERVED_ACK_MASK,
flag & ~RESERVED_ACK_MASK };
return ipmi_chassis_set_bootparam(intf,
IPMI_CHASSIS_BOOTPARAM_INFO_ACK,
flags, 2);
}
static int
ipmi_chassis_set_bootvalid(struct ipmi_intf *intf, uint8_t set_flag, uint8_t clr_flag)
{
int bootvalid;
uint8_t flags[2];
int rc;
chassis_bootparam_set_in_progress(intf, SET_IN_PROGRESS);
rc = chassis_bootparam_clear_ack(intf, BIOS_POST_ACK);
if (rc) {
goto out;
}
bootvalid = ipmi_chassis_get_bootvalid(intf);
if (bootvalid < 0) {
lprintf(LOG_ERR, "Failed to read boot valid flag");
rc = bootvalid;
goto out;
}
flags[0] = (bootvalid & ~clr_flag) | set_flag;
rc = ipmi_chassis_set_bootparam(intf,
IPMI_CHASSIS_BOOTPARAM_FLAG_VALID,
flags, 1);
if (IPMI_CC_OK == rc) {
chassis_bootparam_set_in_progress(intf, COMMIT_WRITE);
}
out:
chassis_bootparam_set_in_progress(intf, SET_COMPLETE);
return rc;
}
static int
ipmi_chassis_set_bootdev(struct ipmi_intf * intf, char * arg, uint8_t *iflags)
{
uint8_t flags[5];
int rc;
chassis_bootparam_set_in_progress(intf, SET_IN_PROGRESS);
rc = chassis_bootparam_clear_ack(intf, BIOS_POST_ACK);
if (rc < 0) {
goto out;
}
if (!iflags)
memset(flags, 0, sizeof(flags));
else
memcpy(flags, iflags, sizeof (flags));
if (!arg)
flags[1] |= 0x00;
else if (!strcmp(arg, "none"))
flags[1] |= 0x00;
else if (!strcmp(arg, "pxe") ||
!strcmp(arg, "force_pxe"))
{
flags[1] |= 0x04;
}
else if (!strcmp(arg, "disk") ||
!strcmp(arg, "force_disk"))
{
flags[1] |= 0x08;
}
else if (!strcmp(arg, "safe") ||
!strcmp(arg, "force_safe"))
{
flags[1] |= 0x0c;
}
else if (!strcmp(arg, "diag") ||
!strcmp(arg, "force_diag"))
{
flags[1] |= 0x10;
}
else if (!strcmp(arg, "cdrom") ||
!strcmp(arg, "force_cdrom"))
{
flags[1] |= 0x14;
}
else if (!strcmp(arg, "floppy") ||
!strcmp(arg, "force_floppy"))
{
flags[1] |= 0x3c;
}
else if (!strcmp(arg, "bios") ||
!strcmp(arg, "force_bios"))
{
flags[1] |= 0x18;
}
else {
lprintf(LOG_ERR, "Invalid argument: %s", arg);
rc = -1;
goto out;
}
/* set flag valid bit */
flags[0] |= 0x80;
rc = ipmi_chassis_set_bootparam(intf,
IPMI_CHASSIS_BOOTPARAM_BOOT_FLAGS,
flags, 5);
if (IPMI_CC_OK == rc) {
chassis_bootparam_set_in_progress(intf, COMMIT_WRITE);
printf("Set Boot Device to %s\n", arg);
}
out:
chassis_bootparam_set_in_progress(intf, SET_COMPLETE);
return rc;
}
static void chassis_bootmailbox_help()
{
lprintf(LOG_NOTICE,
"bootmbox get [text] [block <block>]\n"
" Read the entire Boot Initiator Mailbox or the specified <block>.\n"
" If 'text' option is specified, the data is output as plain text, otherwise\n"
" hex dump mode is used.\n"
"\n"
"bootmbox set text [block <block>] <IANA_PEN> \"<data_string>\"\n"
"bootmbox set [block <block>] <IANA_PEN> <data_byte> [<data_byte> ...]\n"
" Write the specified <block> or the entire Boot Initiator Mailbox.\n"
" It is required to specify a decimal IANA Enterprise Number recognized\n"
" by the boot initiator on the target system. Refer to your target system\n"
" manufacturer for details. The rest of the arguments are either separate\n"
" data byte values separated by spaces, or a single text string argument.\n"
"\n"
" When single block write is requested, the total length of <data> may not\n"
" exceed 13 bytes for block 0, or 16 bytes otherwise.\n"
"\n"
"bootmbox help\n"
" Show this help.");
}
static
int
chassis_set_bootmailbox(struct ipmi_intf *intf, int16_t block, bool use_text,
int argc, char *argv[])
{
int rc = -1;
int32_t iana = 0;
size_t blocks = 0;
size_t datasize = 0;
off_t string_offset = 0;
lprintf(LOG_INFO, "Writing Boot Mailbox...");
if (argc < 1 || str2int(argv[0], &iana)) {
lprintf(LOG_ERR,
"No valid IANA PEN specified!\n");
chassis_bootmailbox_help();
goto out;
}
++argv;
--argc;
if (argc < 1) {
lprintf(LOG_ERR,
"No data provided!\n");
chassis_bootmailbox_help();
goto out;
}
/*
* Initialize the data size. For text mode it is just the
* single argument string length plus one byte for \0 termination.
* For byte mode the length is the number of byte arguments without
* any additional termination.
*/
if (!use_text) {
datasize = argc;
}
else {
datasize = strlen(argv[0]) + 1; /* Include the terminator */
}
lprintf(LOG_INFO, "Data size: %u", datasize);
/* Decide how many blocks we will be writing */
if (block >= 0) {
blocks = 1;
}
else {
/*
* We need to write all data, so calculate the data
* size in blocks and set the starting block to zero.
*/
blocks = CHASSIS_BOOT_MBOX_IANA_SZ;
blocks += datasize;
blocks += CHASSIS_BOOT_MBOX_BLOCK_SZ - 1;
blocks /= CHASSIS_BOOT_MBOX_BLOCK_SZ;
block = 0;
}
lprintf(LOG_INFO, "Blocks to write: %d", blocks);
if (blocks > CHASSIS_BOOT_MBOX_MAX_BLOCKS) {
lprintf(LOG_ERR,
"Data size %zu exceeds maximum (%d)",
datasize,
(CHASSIS_BOOT_MBOX_BLOCK_SZ
* CHASSIS_BOOT_MBOX_MAX_BLOCKS)
- CHASSIS_BOOT_MBOX_IANA_SZ);
goto out;
}
/* Indicate that we're touching the boot parameters */
chassis_bootparam_set_in_progress(intf, SET_IN_PROGRESS);
for (size_t bindex = 0;
datasize > 0 && bindex < blocks;
++bindex, ++block)
{
/* The request data structure */
mbox_t mbox = { .block = block, {{0}} };
/* Destination for input data */
uint8_t *data = mbox.data;
/* The maximum amount of data this block may hold */
size_t maxblocksize = sizeof(mbox.data);
/* The actual amount of data in this block */
size_t blocksize;
off_t unused = 0;
/* Block 0 needs special care as it has IANA PEN specifier */
if (!block) {
data = mbox.b0.data;
maxblocksize = sizeof(mbox.b0.data);
htoipmi24(iana, mbox.b0.iana);
}
/*
* Find out how many bytes we are going to write to this
* block.
*/
if (datasize > maxblocksize) {
blocksize = maxblocksize;
}
else {
blocksize = datasize;
}
/* Remember how much data remains */
datasize -= blocksize;
if (!use_text) {
args2buf(argc, argv, data, blocksize);
argc -= blocksize;
argv += blocksize;
}
else {
memcpy(data, argv[0] + string_offset, blocksize);
string_offset += blocksize;
}
lprintf(LOG_INFO, "Block %3" PRId16 ": %s", block,
buf2str_extended(data, blocksize, " "));
unused = maxblocksize - blocksize;
rc = ipmi_chassis_set_bootparam(intf,
IPMI_CHASSIS_BOOTPARAM_INIT_MBOX,
&mbox,
sizeof(mbox) - unused);
if (IPMI_CC_PARAM_OUT_OF_RANGE == rc) {
lprintf(LOG_ERR,
"Hit end of mailbox writing block %" PRId16,
block);
}
if (rc) {
goto complete;
}
}
lprintf(LOG_INFO,
"Wrote %zu blocks of Boot Initiator Mailbox",
blocks);
chassis_bootparam_set_in_progress(intf, COMMIT_WRITE);
rc = chassis_bootparam_clear_ack(intf, BIOS_POST_ACK | OS_LOADER_ACK);
complete:
chassis_bootparam_set_in_progress(intf, SET_COMPLETE);
out:
return rc;
}
static
int
chassis_get_bootmailbox(struct ipmi_intf *intf,
int16_t block, bool use_text)
{
int rc = IPMI_CC_UNSPECIFIED_ERROR;
char param_str[2]; /* Max "7" */
char block_str[4]; /* Max "255" */
char *bpargv[] = { param_str, block_str };
int flags;
flags = use_text ? BP_FLAG(MBOX_PARSE_USE_TEXT) : 0;
snprintf(param_str, sizeof(param_str),
"%" PRIu8, IPMI_CHASSIS_BOOTPARAM_INIT_MBOX);
if (block >= 0) {
snprintf(block_str, sizeof(block_str),
"%" PRIu8, (uint8_t)block);
rc = ipmi_chassis_get_bootparam(intf,
ARRAY_SIZE(bpargv),
bpargv,
flags);
}
else {
int currblk;
flags |= BP_FLAG(MBOX_PARSE_ALLBLOCKS);
for (currblk = 0; currblk <= UCHAR_MAX; ++currblk) {
snprintf(block_str, sizeof(block_str),
"%" PRIu8, (uint8_t)currblk);
if (currblk) {
/*
* If block 0 succeeded, we don't want to
* print generic info for each next block,
* and we don't want range error to be
* reported when we hit the end of blocks.
*/
flags |= BP_FLAG(PARAM_NO_GENERIC_INFO);
flags |= BP_FLAG(PARAM_NO_RANGE_ERROR);
}
rc = ipmi_chassis_get_bootparam(intf,
ARRAY_SIZE(bpargv),
bpargv,
flags);
if (rc) {
if (currblk) {
rc = IPMI_CC_OK;
}
break;
}
}
}
return rc;
}
static
int
chassis_bootmailbox(struct ipmi_intf *intf, int argc, char *argv[])
{
int rc = IPMI_CC_UNSPECIFIED_ERROR;
bool use_text = false; /* Default to data dump I/O mode */
int16_t block = -1; /* By default print all blocks */
const char *cmd;
if ((argc < 1) || !strcmp(argv[0], "help")) {
chassis_bootmailbox_help();
goto out;
} else {
cmd = argv[0];
++argv;
--argc;
if (argc > 0 && !strcmp(argv[0], "text")) {
use_text = true;
++argv;
--argc;
}
if (argc > 0 && !strcmp(argv[0], "block")) {
if (argc < 2) {
chassis_bootmailbox_help();
goto out;
}
if(str2short(argv[1], &block)) {
lprintf(LOG_ERR,
"Invalid block %s", argv[1]);
goto out;
}
argv += 2;
argc -= 2;
}
if (!strcmp(cmd, "get")) {
rc = chassis_get_bootmailbox(intf, block, use_text);
}
else if (!strcmp(cmd, "set")) {
rc = chassis_set_bootmailbox(intf, block, use_text,
argc, argv);
}
}
out:
return rc;
}
static int
ipmi_chassis_power_policy(struct ipmi_intf * intf, uint8_t policy)
{
struct ipmi_rs * rsp;
struct ipmi_rq req;
memset(&req, 0, sizeof(req));
req.msg.netfn = IPMI_NETFN_CHASSIS;
req.msg.cmd = 0x6;
req.msg.data = &policy;
req.msg.data_len = 1;
rsp = intf->sendrecv(intf, &req);
if (!rsp) {
lprintf(LOG_ERR, "Error in Power Restore Policy command");
return -1;
}
if (rsp->ccode) {
lprintf(LOG_ERR, "Power Restore Policy command failed: %s",
val2str(rsp->ccode, completion_code_vals));
return -1;
}
if (policy == IPMI_CHASSIS_POLICY_NO_CHANGE) {
printf("Supported chassis power policy: ");
if (rsp->data[0] & (1<<IPMI_CHASSIS_POLICY_ALWAYS_OFF))
printf("always-off ");
if (rsp->data[0] & (1<<IPMI_CHASSIS_POLICY_ALWAYS_ON))
printf("always-on ");
if (rsp->data[0] & (1<<IPMI_CHASSIS_POLICY_PREVIOUS))
printf("previous");
printf("\n");
}
else {
printf("Set chassis power restore policy to ");
switch (policy) {
case IPMI_CHASSIS_POLICY_ALWAYS_ON:
printf("always-on\n");
break;
case IPMI_CHASSIS_POLICY_ALWAYS_OFF:
printf("always-off\n");
break;
case IPMI_CHASSIS_POLICY_PREVIOUS:
printf("previous\n");
break;
default:
printf("unknown\n");
}
}
return 0;
}
int
ipmi_power_main(struct ipmi_intf * intf, int argc, char ** argv)
{
int rc = 0;
uint8_t ctl = 0;
if (argc < 1 || !strcmp(argv[0], "help")) {
lprintf(LOG_NOTICE, "chassis power Commands: status, on, off, cycle, reset, diag, soft");
return 0;
}
if (!strcmp(argv[0], "status")) {
rc = ipmi_chassis_print_power_status(intf);
return rc;
}
if (!strcmp(argv[0], "up") || !strcmp(argv[0], "on"))
ctl = IPMI_CHASSIS_CTL_POWER_UP;
else if (!strcmp(argv[0], "down") || !strcmp(argv[0], "off"))
ctl = IPMI_CHASSIS_CTL_POWER_DOWN;
else if (!strcmp(argv[0], "cycle"))
ctl = IPMI_CHASSIS_CTL_POWER_CYCLE;
else if (!strcmp(argv[0], "reset"))
ctl = IPMI_CHASSIS_CTL_HARD_RESET;
else if (!strcmp(argv[0], "diag"))
ctl = IPMI_CHASSIS_CTL_PULSE_DIAG;
else if (!strcmp(argv[0], "acpi") || !strcmp(argv[0], "soft"))
ctl = IPMI_CHASSIS_CTL_ACPI_SOFT;
else {
lprintf(LOG_ERR, "Invalid chassis power command: %s", argv[0]);
return -1;
}
rc = ipmi_chassis_power_control(intf, ctl);
return rc;
}
void
ipmi_chassis_set_bootflag_help()
{
unsigned char set_flag;
unsigned char clr_flag;
lprintf(LOG_NOTICE, "bootparam set bootflag <device> [options=...]");
lprintf(LOG_NOTICE, " Legal devices are:");
lprintf(LOG_NOTICE, " none : No override");
lprintf(LOG_NOTICE, " force_pxe : Force PXE boot");
lprintf(LOG_NOTICE, " force_disk : Force boot from default Hard-drive");
lprintf(LOG_NOTICE, " force_safe : Force boot from default Hard-drive, request Safe Mode");
lprintf(LOG_NOTICE, " force_diag : Force boot from Diagnostic Partition");
lprintf(LOG_NOTICE, " force_cdrom : Force boot from CD/DVD");
lprintf(LOG_NOTICE, " force_bios : Force boot into BIOS Setup");
get_bootparam_options("options=help", &set_flag, &clr_flag);
}
/*
* Sugar. Macros for internal use by bootdev_parse_options() to make
* the structure initialization look better. Can't use scope-limited
* static consts for initializers with gcc5, alas.
*/
#define BF1_OFFSET 0
#define BF2_OFFSET 1
#define BF3_OFFSET 2
#define BF4_OFFSET 3
#define BF_BYTE_COUNT 5
/* A helper for ipmi_chassis_main() to parse bootdev options */
static
bool
bootdev_parse_options(char *optstring, uint8_t flags[])
{
char *token;
char *saveptr = NULL;
int optionError = 0;
static const struct bootdev_opt_s {
char *name;
off_t offset;
unsigned char mask;
unsigned char value;
char *desc;
} *op;
static const struct bootdev_opt_s options[] = {
/* data 1 */
{
"valid",
BF1_OFFSET,
BF1_VALID_MASK,
BF1_VALID,
"Boot flags valid"
},
{
"persistent",
BF1_OFFSET,
BF1_PERSIST_MASK,
BF1_PERSIST,
"Changes are persistent for "
"all future boots"
},
{
"efiboot",
BF1_OFFSET,
BF1_BOOT_TYPE_MASK,
BF1_BOOT_TYPE_EFI,
"Extensible Firmware Interface "
"Boot (EFI)"
},
/* data 2 */
{
"clear-cmos",
BF2_OFFSET,
BF2_CMOS_CLEAR_MASK,
BF2_CMOS_CLEAR,
"CMOS clear"
},
{
"lockkbd",
BF2_OFFSET,
BF2_KEYLOCK_MASK,
BF2_KEYLOCK,
"Lock Keyboard"
},
/* data2[5:2] is parsed elsewhere */
{
"screenblank",
BF2_OFFSET,
BF2_BLANK_SCREEN_MASK,
BF2_BLANK_SCREEN,
"Screen Blank"
},
{
"lockoutreset",
BF2_OFFSET,
BF2_RESET_LOCKOUT_MASK,
BF2_RESET_LOCKOUT,
"Lock out Reset buttons"
},
/* data 3 */
{
"lockout_power",
BF3_OFFSET,
BF3_POWER_LOCKOUT_MASK,
BF3_POWER_LOCKOUT,
"Lock out (power off/sleep "
"request) via Power Button"
},
{
"verbose=default",
BF3_OFFSET,
BF3_VERBOSITY_MASK,
BF3_VERBOSITY_DEFAULT,
"Request quiet BIOS display"
},
{
"verbose=no",
BF3_OFFSET,
BF3_VERBOSITY_MASK,
BF3_VERBOSITY_QUIET,
"Request quiet BIOS display"
},
{
"verbose=yes",
BF3_OFFSET,
BF3_VERBOSITY_MASK,
BF3_VERBOSITY_VERBOSE,
"Request verbose BIOS display"
},
{
"force_pet",
BF3_OFFSET,
BF3_EVENT_TRAPS_MASK,
BF3_EVENT_TRAPS,
"Force progress event traps"
},
{
"upw_bypass",
BF3_OFFSET,
BF3_PASSWD_BYPASS_MASK,
BF3_PASSWD_BYPASS,
"User password bypass"
},
{
"lockout_sleep",
BF3_OFFSET,
BF3_SLEEP_LOCKOUT_MASK,
BF3_SLEEP_LOCKOUT,
"Lock out the Sleep button"
},
{
"cons_redirect=default",
BF3_OFFSET,
BF3_CONSOLE_REDIR_MASK,
BF3_CONSOLE_REDIR_DEFAULT,
"Console redirection occurs per "
"BIOS configuration setting"
},
{
"cons_redirect=skip",
BF3_OFFSET,
BF3_CONSOLE_REDIR_MASK,
BF3_CONSOLE_REDIR_SUPPRESS,
"Suppress (skip) console "
"redirection if enabled"
},
{
"cons_redirect=enable",
BF3_OFFSET,
BF3_CONSOLE_REDIR_MASK,
BF3_CONSOLE_REDIR_ENABLE,
"Request console redirection "
"be enabled"
},
/* data 4 */
/* data4[7:4] reserved */
/* data4[3] BIOS Shared Mode Override, not implemented here */
/* data4[2:0] BIOS Mux Control Override, not implemented here */
/* data5 reserved */
{NULL} /* End marker */
};
memset(&flags[0], 0, BF_BYTE_COUNT);
token = strtok_r(optstring, ",", &saveptr);
while (token) {
if (strcmp(token, "help") == 0) {
optionError = 1;
break;
}
for (op = options; op->name; ++op) {
if (strcmp(token, op->name) == 0) {
flags[op->offset] &= ~(op->mask);
flags[op->offset] |= op->value;
break;
}
}
if (!op->name) {
/* Option not found */
optionError = 1;
lprintf(LOG_ERR, "Invalid option: %s", token);
}
token = strtok_r(NULL, ",", &saveptr);
}
if (optionError) {
lprintf(LOG_NOTICE, "Legal options settings are:");
lprintf(LOG_NOTICE, " %-22s: %s",
"help",
"print this message");
for (op = options; op->name; ++op) {
lprintf(LOG_NOTICE, " %-22s: %s", op->name, op->desc);
}
return false;
}
return true;
}
int
ipmi_chassis_main(struct ipmi_intf * intf, int argc, char ** argv)
{
int rc = -1;
if (!argc || !strcmp(argv[0], "help")) {
lprintf(LOG_NOTICE, "Chassis Commands:\n"
" status, power, policy, restart_cause\n"
" poh, identify, selftest,\n"
" bootdev, bootparam, bootmbox");
}
else if (!strcmp(argv[0], "status")) {
rc = ipmi_chassis_status(intf);
}
else if (!strcmp(argv[0], "selftest")) {
rc = ipmi_chassis_selftest(intf);
}
else if (!strcmp(argv[0], "power")) {
uint8_t ctl = 0;
if (argc < 2 || !strcmp(argv[1], "help")) {
lprintf(LOG_NOTICE, "chassis power Commands: status, on, off, cycle, reset, diag, soft");
rc = 0;
goto out;
}
if (!strcmp(argv[1], "status")) {
rc = ipmi_chassis_print_power_status(intf);
goto out;
}
if (!strcmp(argv[1], "up") ||
!strcmp(argv[1], "on"))
{
ctl = IPMI_CHASSIS_CTL_POWER_UP;
}
else if (!strcmp(argv[1], "down") ||
!strcmp(argv[1], "off"))
{
ctl = IPMI_CHASSIS_CTL_POWER_DOWN;
}
else if (!strcmp(argv[1], "cycle"))
ctl = IPMI_CHASSIS_CTL_POWER_CYCLE;
else if (!strcmp(argv[1], "reset"))
ctl = IPMI_CHASSIS_CTL_HARD_RESET;
else if (!strcmp(argv[1], "diag"))
ctl = IPMI_CHASSIS_CTL_PULSE_DIAG;
else if (!strcmp(argv[1], "acpi") ||
!strcmp(argv[1], "soft"))
{
ctl = IPMI_CHASSIS_CTL_ACPI_SOFT;
}
else {
lprintf(LOG_ERR, "Invalid chassis power command: %s", argv[1]);
goto out;
}
rc = ipmi_chassis_power_control(intf, ctl);
}
else if (!strcmp(argv[0], "identify")) {
if (argc < 2) {
rc = ipmi_chassis_identify(intf, NULL);
}
else if (!strcmp(argv[1], "help")) {
lprintf(LOG_NOTICE, "chassis identify <interval>");
lprintf(LOG_NOTICE, " default is 15 seconds");
lprintf(LOG_NOTICE, " 0 to turn off");
lprintf(LOG_NOTICE, " force to turn on indefinitely");
} else {
rc = ipmi_chassis_identify(intf, argv[1]);
}
}
else if (!strcmp(argv[0], "poh")) {
rc = ipmi_chassis_poh(intf);
}
else if (!strcmp(argv[0], "restart_cause")) {
rc = ipmi_chassis_restart_cause(intf);
}
else if (!strcmp(argv[0], "policy")) {
if (argc < 2 || !strcmp(argv[1], "help")) {
lprintf(LOG_NOTICE, "chassis policy <state>");
lprintf(LOG_NOTICE, " list : return supported policies");
lprintf(LOG_NOTICE, " always-on : turn on when power is restored");
lprintf(LOG_NOTICE, " previous : return to previous state when power is restored");
lprintf(LOG_NOTICE, " always-off : stay off after power is restored");
} else {
uint8_t ctl;
if (!strcmp(argv[1], "list"))
ctl = IPMI_CHASSIS_POLICY_NO_CHANGE;
else if (!strcmp(argv[1], "always-on"))
ctl = IPMI_CHASSIS_POLICY_ALWAYS_ON;
else if (!strcmp(argv[1], "previous"))
ctl = IPMI_CHASSIS_POLICY_PREVIOUS;
else if (!strcmp(argv[1], "always-off"))
ctl = IPMI_CHASSIS_POLICY_ALWAYS_OFF;
else {
lprintf(LOG_ERR, "Invalid chassis policy: %s", argv[1]);
return -1;
}
rc = ipmi_chassis_power_policy(intf, ctl);
}
}
else if (!strcmp(argv[0], "bootparam")) {
if (argc < 3 || !strcmp(argv[1], "help")) {
lprintf(LOG_NOTICE, "bootparam get <param #>");
ipmi_chassis_set_bootflag_help();
}
else {
if (!strcmp(argv[1], "get")) {
rc = ipmi_chassis_get_bootparam(intf,
argc - 2,
argv + 2,
0);
}
else if (!strcmp(argv[1], "set")) {
unsigned char set_flag=0;
unsigned char clr_flag=0;
if (!strcmp(argv[2], "help") ||
argc < 4 || (argc >= 4 &&
strcmp(argv[2], "bootflag") != 0)) {
ipmi_chassis_set_bootflag_help();
} else {
if (argc == 5) {
get_bootparam_options(argv[4], &set_flag, &clr_flag);
}
rc = ipmi_chassis_set_bootdev(intf, argv[3], NULL);
if (argc == 5 && (set_flag != 0 || clr_flag != 0)) {
rc = ipmi_chassis_set_bootvalid(intf, set_flag, clr_flag);
}
}
}
else
lprintf(LOG_NOTICE, "bootparam get|set <option> [value ...]");
}
}
else if (!strcmp(argv[0], "bootdev")) {
if (argc < 2 || !strcmp(argv[1], "help")) {
lprintf(LOG_NOTICE, "bootdev <device> [clear-cmos=yes|no]");
lprintf(LOG_NOTICE, "bootdev <device> [options=help,...]");
lprintf(LOG_NOTICE, " none : Do not change boot device order");
lprintf(LOG_NOTICE, " pxe : Force PXE boot");
lprintf(LOG_NOTICE, " disk : Force boot from default Hard-drive");
lprintf(LOG_NOTICE, " safe : Force boot from default Hard-drive, request Safe Mode");
lprintf(LOG_NOTICE, " diag : Force boot from Diagnostic Partition");
lprintf(LOG_NOTICE, " cdrom : Force boot from CD/DVD");
lprintf(LOG_NOTICE, " bios : Force boot into BIOS Setup");
lprintf(LOG_NOTICE, " floppy: Force boot from Floppy/primary removable media");
} else {
static const char *kw = "options=";
char *optstr = NULL;
uint8_t flags[BF_BYTE_COUNT];
bool use_flags = false;
if (argc >= 3) {
if (!strcmp(argv[2], "clear-cmos=yes")) {
/* Exclusive clear-cmos, no other flags */
optstr = "clear-cmos";
}
else if (!strcmp(argv[2], kw)) {
optstr = argv[2] + strlen(kw);
}
}
if (optstr) {
if (!bootdev_parse_options(optstr, flags))
goto out;
use_flags = true;
}
rc = ipmi_chassis_set_bootdev(intf, argv[1],
use_flags
? flags
: NULL);
}
}
else if (!strcmp(argv[0], "bootmbox")) {
rc = chassis_bootmailbox(intf, argc -1, argv + 1);
}
else {
lprintf(LOG_ERR, "Invalid chassis command: %s", argv[0]);
}
out:
return rc;
}