deepblue/pimox7
1
0
Fork 0
mirror of https://github.com/pimox/pimox7.git synced 2025-05-11 19:17:24 +00:00
Code Issues Projects Releases Wiki Activity
pimox7/RPiOS64-IA-Install.sh
Jay LaCroix 54857754b5
Fix for dpkg error while installing pve-manager 
While running the script, the following error will appear during the process:

proxmox-ve depends on pve-manager; however:
Package pve-manager is not configured yet.

This appears to be a combination of upstream issues and race conditions. Installing pve-manager by itself, prior to installing the proxmox-ve package, along with disabling optional dependencies, seems to fix this issue.

This pull request has the script install pve-manager early, before the other packages, so that it's already installed and configured by the time the remainder of the script performs the remaining functions.
2022-08-05 19:08:25 -04:00

210 lines
11 KiB
Bash
Raw Permalink Blame History

# !/bin/bash
#######################################################################
# Name: RPiOS64-IA-Install.sh Version: 0.1.2 #
# Created: 07.09.2021 Modified: 22.02.2022 #
# Author: TuxfeatMac J.T. #
# Purpose: interactive, automatic, Pimox7 installation RPi4B, RPi3B+ #
#########################################################################################################################################
# Tested with image from: #
# https://downloads.raspberrypi.org/raspios_lite_arm64/images/raspios_lite_arm64-2021-11-08/2021-10-30-raspios-bullseye-arm64-lite.zip #
#########################################################################################################################################
#### SET SOME COLOURS ###################################################################################################################
NORMAL=$(tput sgr0)
RED=$(tput setaf 1)
GREEN=$(tput setaf 2)
YELLOW=$(tput setaf 3)
GREY=$(tput setaf 8)
#### SCRIPT IS MENT TO BE TO RUN AS ROOT! NOT AS PI WITH SUDO ###########################################################################
if [ $USER != root ]
then
printf "${RED}PLEASE RUN THIS SCRIPT AS ROOT! DONT USE SUDO! $NORMAL \n"
exit
fi
printf " $YELLOW
====================================================================
! PLEASE DONT USE SUDO, USE SU TO LOGIN TO THE ROOT USER !
! PLEASE STOP THIS SCRIPT NOW WITH CONTROL+C IF YOU ARE USING SUDO !
! CONTINUING SETUP IN 3 SECONDS... !
====================================================================
$NORMAL\n" && sleep 3
#### GET THE RPI MODEL #### EXTRA STEPS FOR RPI3B+ ##################### UNTESTED #######################################################
RPIMOD=$(cat /sys/firmware/devicetree/base/model | cut -d ' ' -f 3)
if [ $RPIMOD == 3 ]
then
printf "Officially, the only supported model is Raspberry Pi 4. Unfortunately, you have a model 3.\n"
printf "Edit installer.sh manually.. I hope you know what you are doing..."
exit
## WORKS BUT DOSEN'T SHOW RPI 3 WARNINGS YET ...
# [ ] ADD WARNING MESSAGES
# [ ] GET RPI3 VALUES SWAP ZRAM INSTED OF HARD CODING ?
PI3_ZRAM='1664' # zram 1,6GB
PI3_SWAP='384' # dphys-swapfile 0,4GB
##
apt install -y zram-tools
printf "SIZE=$PI3_ZRAM\nPRIORITY=100\nALGO=lz4\n" >> /etc/default/zramswap
printf "CONF_SWAPSIZE=$PI3_SWAP\n" >> /etc/dphys-swapfile
vm.swappiness=100 >> /etc/sysctl.d/99-sysctl.conf
# fix net names eth0 | enxMAC # !
RPIMAC=$(ip a | grep ether | cut -d ' ' -f 6)
printf "SUBSYSTEM==\"net\", ACTION==\"add\", DRIVERS==\"?*\", ATTR{address}==\"$RPIMAC\", ATTR{dev_id}==\"0x0\", ATTR{type}==\"1\", KERNEL==\"eth*\", NAME=\"eth0\"\n" > /etc/udev/rules.d/70-presistant-net.rules
fi
#### GET USER INPUTS #### HOSTNAME ######################################################################################################
read -p "Enter new hostname e.g. RPi4-01-PVE : " HOSTNAME
while [[ ! "$HOSTNAME" =~ ^(([a-zA-Z0-9]|[a-zA-Z0-9][a-zA-Z0-9\-]*[a-zA-Z0-9])\.)*([A-Za-z0-9]|[A-Za-z0-9][A-Za-z0-9\-]*[A-Za-z0-9])$ ]]
do
printf " --->$RED $HOSTNAME $NORMAL<--- Is NOT an valid HOSTNAME, try again...\n"
read -p "Enter new hostname e.g.: RPi4-01-PVE : " HOSTNAME
done
#### IP AND NETMASK ! ###################################################################################################################
read -p "Enter new static IP and NETMASK e.g. 192.168.0.100/24 : " RPI_IP
while [[ ! "$RPI_IP" =~ ^[0-9]{1,3}\.[0-9]{1,3}\.[0-9]{1,3}\.[0-9]{1,3}+\/[0-9]+$ ]]
do
printf " --->$RED $RPI_IP $NORMAL<--- Is NOT an valid IPv4 ADDRESS with NETMASK, try again...\n"
read -p "IPADDRESS & NETMASK ! E.G.: 192.168.0.100/24 : " RPI_IP
done
RPI_IP_ONLY=$(echo "$RPI_IP" | cut -d '/' -f 1)
#### GATEWAY ############################################################################################################################
GATEWAY="$(echo $RPI_IP | cut -d '.' -f 1,2,3).1"
read -p"Is $GATEWAY the correct gateway ? y / n : " CORRECT
if [ "$CORRECT" != "y" ]
then
read -p "Enter the gateway e.g. 192.168.0.1 : " GATEWAY
while [[ ! "$GATEWAY" =~ ^[0-9]{1,3}\.[0-9]{1,3}\.[0-9]{1,3}\.[0-9]{1,3}$ ]]
do
printf " --->$RED $GATEWAY $NORMAL<--- Is NOT an valid IPv4 GATEWAY, try again...\n"
read -p "THE GATEWAY IP ! E.G. 192.168.0.1 : " GATEWAY
done
fi
#### AGREE TO CHANGES ###################################################################################################################
printf "
$YELLOW#########################################################################################
=========================================================================================$NORMAL
THE NEW HOSTNAME WILL BE:$GREEN $HOSTNAME $NORMAL
=========================================================================================
THE DHCP SERVER ($YELLOW dhcpcd5 $NORMAL) WILL BE $RED REMOVED $NORMAL !!!
=========================================================================================
THE PIMOX REPO WILL BE ADDED IN : $YELLOW /etc/apt/sources.list.d/pimox.list $NORMAL CONFIGURATION :
$GRAY# Pimox 7 Development Repo$NORMAL
deb https://raw.githubusercontent.com/pimox/pimox7/master/ dev/
=========================================================================================
THE NETWORK CONFIGURATION IN : $YELLOW /etc/network/interfaces $NORMAL WILL BE $RED CHANGED $NORMAL !!! TO :
auto lo
iface lo inet loopback
iface eth0 inet manual
auto vmbr0
iface vmbr0 inet static
address $GREEN $RPI_IP $NORMAL
gateway $GREEN $GATEWAY $NORMAL
bridge-ports eth0
bridge-stp off
bridge-fd 0
=========================================================================================
THE HOSTNAMES IN : $YELLOW /etc/hosts $NORMAL WILL BE $RED OVERWRITTEN $NORMAL !!! WITH :
127.0.0.1\tlocalhost
$RPI_IP_ONLY\t$HOSTNAME
=========================================================================================
THESE STATEMENTS WILL BE $RED ADDED $NORMAL TO THE $YELLOW /boot/cmdline.txt $NORMAL IF NONE EXISTENT :
cgroup_enable=cpuset cgroup_enable=memory cgroup_memory=1
$YELLOW=========================================================================================
#########################################################################################\n $NORMAL
"
#### PROMPT FOR CONFORMATION ############################################################################################################
read -p "YOU ARE OKAY WITH THESE CHANGES ? YOUR DECLARATIONS ARE CORRECT ? CONTINUE ? y / n : " CONFIRM
if [ "$CONFIRM" != "y" ]; then exit; fi
#### SET A ROOT PWD FOR WEB GUI LOGIN ###################################################################################################
printf "
=========================================================================================
$RED ! SETUP NEW ROOT PASSWORD ! $NORMAL
=========================================================================================\n
" && passwd
if [ $? != 0 ]; then exit; fi
#### BASE UPDATE, DEPENDENCIES INSTALLATION #############################################################################################
printf "
=========================================================================================
Begin installation, Normal duration on a default RPi4 ~ 30 minutes, be patient...
=========================================================================================\n
"
#### SET NEW HOSTNAME ###################################################################################################################
hostnamectl set-hostname $HOSTNAME
#### ADD SOURCE PIMOX7 + KEY & UPDATE & INSTALL RPI-KERNEL-HEADERS #######################################################################
printf "# PiMox7 Development Repo
deb https://raw.githubusercontent.com/pimox/pimox7/master/ dev/ \n" > /etc/apt/sources.list.d/pimox.list
curl https://raw.githubusercontent.com/pimox/pimox7/master/KEY.gpg | apt-key add -
apt update && apt upgrade -y
#### REMOVE DHCP, CLEAN UP ###############################################################################################################
apt purge -y dhcpcd5
apt autoremove -y
#### FIX CONTAINER STATS NOT SHOWING UP IN WEB GUI #######################################################################################
if [ "$(cat /boot/cmdline.txt | grep cgroup)" != "" ]
then
printf "Seems to be already fixed!"
else
sed -i "1 s|$| cgroup_enable=cpuset cgroup_enable=memory cgroup_memory=1|" /boot/cmdline.txt
fi
#### INSTALL PIMOX7 AND REBOOT ###########################################################################################################
#### Install pve-manager separately, and without recommended packages, to avoid packaging issue later.
DEBIAN_FRONTEND=noninteractive apt install -y --no-install-recommends -o Dpkg::Options::="--force-confdef" pve-manager
#### Continue with remaining packages
DEBIAN_FRONTEND=noninteractive apt install -y -o Dpkg::Options::="--force-confdef" proxmox-ve
#### RECONFIGURE NETWORK #### /etc/hosts REMOVE IPv6 #### /etc/network/interfaces.new CONFIGURE NETWORK TO CHANGE ON REBOOT ##############
printf "
=========================================================================================
$GREEN ! FIXING NETWORK CONFIGURATION.... ERRORS ARE NOMALAY FINE AND RESOLVED AFTER REBOOT ! $NORMAL
=========================================================================================
\n"
printf "127.0.0.1\tlocalhost
$RPI_IP_ONLY\t$HOSTNAME\n" > /etc/hosts
printf "auto lo
iface lo inet loopback
iface eth0 inet manual
auto vmbr0
iface vmbr0 inet static
address $RPI_IP
gateway $GATEWAY
bridge-ports eth0
bridge-stp off
bridge-fd 0 \n" > /etc/network/interfaces.new
#### CONFIGURE PIMOX7 BANNER #############################################################################################################
cp /usr/share/javascript/proxmox-widget-toolkit/proxmoxlib.js /usr/share/javascript/proxmox-widget-toolkit/proxmoxlib.js.auto.backup
SEARCH="return Ext.String.format('"
#### PLACE HOLDER BANNER BEGIN --> #### LINE 1 #### #### LINEBREAK #### -- #### LINE 2 #####
REPLACE="return Ext.String.format(' This is a unofficial development build of PVE7 - PIMOX7 - https://github.com/pimox/pimox7 Build to run a PVE7 on the RPi4. ! ! ! NO GUARANTEE NOT OFFICIALLY SUPPORTED ! ! ! ');"
sed -i "s|$SEARCH.*|$REPLACE|" /usr/share/javascript/proxmox-widget-toolkit/proxmoxlib.js
### FINAL MESSAGE ########################################################################################################################
printf "
=========================================================================================
$GREEN ! INSTALATION COMPLETED ! WAIT ! REBOOT ! $NORMAL
=========================================================================================
after reboot the PVE web interface will be reachable here :
---> $GREEN https://$RPI_IP_ONLY:8006/ $NORMAL <---
run ---> $YELLOW apt upgrade -y $NORMAL <---
in a root shell to complete the installation.
\n" && sleep 10 && reboot
#### EOF ####
Reference in New Issue View Git Blame Copy Permalink