deepblue/windows-itpro-docs
1
0
Fork 0
mirror of https://github.com/MicrosoftDocs/windows-itpro-docs.git synced 2025-06-21 21:33:38 +00:00
Code Issues Actions 3 Packages Projects Releases Wiki Activity

Merge branch 'master' into v-smandalika-dvencyp-4491111

Browse Source
This commit is contained in:
Siddarth Mandalika
2021-03-04 09:44:07 +05:30
committed by GitHub
parent a3d7e7b0c9 b1f47a8e30
commit 0147b57c2e
2194 changed files with 117417 additions and 25015 deletions
Download Patch File Download Diff File Expand all files Collapse all files

4
windows/security/information-protection/TOC.md
View File

@ -3,9 +3,9 @@
## [BitLocker](bitlocker\bitlocker-overview.md)
### [Overview of BitLocker Device Encryption in Windows 10](bitlocker\bitlocker-device-encryption-overview-windows-10.md)
### [BitLocker frequently asked questions (FAQ)](bitlocker\bitlocker-frequently-asked-questions.md)
#### [Overview and requirements](bitlocker\bitlocker-overview-and-requirements-faq.md)
#### [Overview and requirements](bitlocker\bitlocker-overview-and-requirements-faq.yml)
#### [Upgrading](bitlocker\bitlocker-upgrading-faq.md)
#### [Deployment and administration](bitlocker\bitlocker-deployment-and-administration-faq.md)
#### [Deployment and administration](bitlocker\bitlocker-deployment-and-administration-faq.yml)
#### [Key management](bitlocker\bitlocker-key-management-faq.md)
#### [BitLocker To Go](bitlocker\bitlocker-to-go-faq.md)
#### [Active Directory Domain Services](bitlocker\bitlocker-and-adds-faq.md)

14
windows/security/information-protection/bitlocker/bitlocker-and-adds-faq.md
View File

@ -29,16 +29,16 @@ ms.custom: bitlocker
Stored information | Description
-------------------|------------
Hash of the TPM owner password | Beginning with Windows 10, the password hash is not stored in AD DS by default. The password hash can be stored only if the TPM is owned and the ownership was taken by using components of Windows 8.1 or earlier, such as the BitLocker Setup Wizard or the TPM snap-in.
BitLocker recovery password | The recovery password allows you to unlock and access the drive in the event of a recovery incident. Domain administrators can view the BitLocker recovery password by using the BitLocker Recovery Password Viewer. For more information about this tool, see [BitLocker: Use BitLocker Recovery Password Viewer](bitlocker-use-bitlocker-recovery-password-viewer.md).
BitLocker key package | The key package helps to repair damage to the hard disk that would otherwise prevent standard recovery. Using the key package for recovery requires the BitLocker Repair Tool, Repair-bde.
BitLocker recovery password | The recovery password allows you to unlock and access the drive after a recovery incident. Domain administrators can view the BitLocker recovery password by using the BitLocker Recovery Password Viewer. For more information about this tool, see [BitLocker: Use BitLocker Recovery Password Viewer](bitlocker-use-bitlocker-recovery-password-viewer.md).
BitLocker key package | The key package helps to repair damage to the hard disk that would otherwise prevent standard recovery. Using the key package for recovery requires the BitLocker Repair Tool, `Repair-bde`.
## What if BitLocker is enabled on a computer before the computer has joined the domain?
If BitLocker is enabled on a drive before Group Policy has been applied to enforce backup, the recovery information will not be automatically backed up to AD DS when the computer joins the domain or when Group Policy is subsequently applied. However, you can use the **Choose how BitLocker-protected operating system drives can be recovered**, **Choose how BitLocker-protected fixed drives can be recovered** and **Choose how BitLocker-protected removable drives can be recovered** Group Policy settings to require that the computer be connected to a domain before BitLocker can be enabled to help ensure that recovery information for BitLocker-protected drives in your organization is backed up to AD DS.
If BitLocker is enabled on a drive before Group Policy has been applied to enforce a backup, the recovery information will not be automatically backed up to AD DS when the computer joins the domain or when Group Policy is subsequently applied. However, you can use the **Choose how BitLocker-protected operating system drives can be recovered**, **Choose how BitLocker-protected fixed drives can be recovered**, and **Choose how BitLocker-protected removable drives can be recovered** Group Policy settings to require the computer to be connected to a domain before BitLocker can be enabled to help ensure that recovery information for BitLocker-protected drives in your organization is backed up to AD DS.
For more info, see [BitLocker Group Policy settings](bitlocker-group-policy-settings.md).
The BitLocker Windows Management Instrumentation (WMI) interface does allow administrators to write a script to back up or synchronize an online client's existing recovery information; however, BitLocker does not automatically manage this process. The manage-bde command-line tool can also be used to manually back up recovery information to AD DS. For example, to back up all of the recovery information for the `$env:SystemDrive` to AD DS, you would use the following command script from an elevated command prompt:
The BitLocker Windows Management Instrumentation (WMI) interface does allow administrators to write a script to back up or synchronize an online client's existing recovery information; however, BitLocker does not automatically manage this process. The `manage-bde` command-line tool can also be used to manually back up recovery information to AD DS. For example, to back up all of the recovery information for the `$env:SystemDrive` to AD DS, you would use the following command script from an elevated command prompt:
```PowerShell
$BitLocker = Get-BitLockerVolume -MountPoint $env:SystemDrive
@ -61,13 +61,13 @@ Ultimately, determining whether a legitimate backup exists in AD DS requires qu
No. By design, BitLocker recovery password entries do not get deleted from AD DS; therefore, you might see multiple passwords for each drive. To identify the latest password, check the date on the object.
## What happens if the backup initially fails? Will BitLocker retry the backup?
## What happens if the backup initially fails? Will BitLocker retry it?
If the backup initially fails, such as when a domain controller is unreachable at the time when the BitLocker setup wizard is run, BitLocker does not try again to back up the recovery information to AD DS.
When an administrator selects the **Require BitLocker backup to AD DS** check box of the **Store BitLocker recovery information in Active Directory Domain Service (Windows 2008 and Windows Vista)** policy setting, or the equivalent **Do not enable BitLocker until recovery information is stored in AD DS for (operating system | fixed data | removable data) drives** check box in any of the **Choose how BitLocker-protected operating system drives can be recovered**, **Choose how BitLocker-protected fixed data drives can be recovered**, **Choose how BitLocker-protected removable data drives can be recovered** policy settings, this prevents users from enabling BitLocker unless the computer is connected to the domain and the backup of BitLocker recovery information to AD DS succeeds. With these settings configured if the backup fails, BitLocker cannot be enabled, ensuring that administrators will be able to recover BitLocker-protected drives in the organization.
When an administrator selects the **Require BitLocker backup to AD DS** check box of the **Store BitLocker recovery information in Active Directory Domain Service (Windows 2008 and Windows Vista)** policy setting, or the equivalent **Do not enable BitLocker until recovery information is stored in AD DS for (operating system | fixed data | removable data) drives** check box in any of the **Choose how BitLocker-protected operating system drives can be recovered**, **Choose how BitLocker-protected fixed data drives can be recovered**, and **Choose how BitLocker-protected removable data drives can be recovered** policy settings, users can't enable BitLocker unless the computer is connected to the domain and the backup of BitLocker recovery information to AD DS succeeds. With these settings configured if the backup fails, BitLocker cannot be enabled, ensuring that administrators will be able to recover BitLocker-protected drives in the organization.
For more info, see [BitLocker Group Policy settings](bitlocker-group-policy-settings.md).
When an administrator clears these check boxes, the administrator is allowing a drive to be BitLocker-protected without having the recovery information successfully backed up to AD DS; however, BitLocker will not automatically retry the backup if it fails. Instead, administrators can create a script for the backup, as described earlier in [What if BitLocker is enabled on a computer before the computer has joined the domain?](#what-if-bitlocker-is-enabled-on-a-computer-before-the-computer-has-joined-the-domain) to capture the information after connectivity is restored.
When an administrator clears these check boxes, the administrator is allowing a drive to be BitLocker-protected without having the recovery information successfully backed up to AD DS; however, BitLocker will not automatically retry the backup if it fails. Instead, administrators can create a backup script, as described earlier in [What if BitLocker is enabled on a computer before the computer has joined the domain?](#what-if-bitlocker-is-enabled-on-a-computer-before-the-computer-has-joined-the-domain) to capture the information after connectivity is restored.

65
windows/security/information-protection/bitlocker/bitlocker-basic-deployment.md
View File

@ -1,6 +1,6 @@
---
title: BitLocker basic deployment (Windows 10)
description: This topic for the IT professional explains how BitLocker features can be used to protect your data through drive encryption.
description: This article for the IT professional explains how BitLocker features can be used to protect your data through drive encryption.
ms.assetid: 97c646cb-9e53-4236-9678-354af41151c4
ms.reviewer:
ms.prod: w10
@ -24,7 +24,7 @@ ms.custom: bitlocker
- Windows 10
This topic for the IT professional explains how BitLocker features can be used to protect your data through drive encryption.
This article for the IT professional explains how BitLocker features can be used to protect your data through drive encryption.
## Using BitLocker to encrypt volumes
@ -39,12 +39,12 @@ BitLocker encryption can be done using the following methods:
- BitLocker control panel
- Windows Explorer
- manage-bde command line interface
- manage-bde command-line interface
- BitLocker Windows PowerShell cmdlets
### Encrypting volumes using the BitLocker control panel
Encrypting volumes with the BitLocker control panel (click **Start**, type **bitlocker**, click **Manage BitLocker**) is how many users will utilize BitLocker. The name of the BitLocker control panel is BitLocker Drive Encryption. The BitLocker control panel supports encrypting operating system, fixed data and removable data volumes. The BitLocker control panel will organize available drives in the appropriate category based on how the device reports itself to Windows. Only formatted volumes with assigned drive letters will appear properly in the BitLocker control panel applet.
Encrypting volumes with the BitLocker control panel (select **Start**, type *bitlocker*, select **Manage BitLocker**) is how many users will utilize BitLocker. The name of the BitLocker control panel is BitLocker Drive Encryption. The BitLocker control panel supports encrypting operating system, fixed data, and removable data volumes. The BitLocker control panel will organize available drives in the appropriate category based on how the device reports itself to Windows. Only formatted volumes with assigned drive letters will appear properly in the BitLocker control panel applet.
To start encryption for a volume, select **Turn on BitLocker** for the appropriate drive to initialize the BitLocker Drive Encryption Wizard. BitLocker Drive Encryption Wizard options vary based on volume type (operating system volume or data volume).
### Operating system volume
@ -54,7 +54,7 @@ Upon launch, the BitLocker Drive Encryption Wizard verifies the computer meets t
|Requirement|Description|
|--- |--- |
|Hardware configuration|The computer must meet the minimum requirements for the supported Windows versions.|
|Operating system|BitLocker is an optional feature which can be installed by Server Manager on Windows Server 2012 and later.|
|Operating system|BitLocker is an optional feature that can be installed by Server Manager on Windows Server 2012 and later.|
|Hardware TPM|TPM version 1.2 or 2.0. <p> A TPM is not required for BitLocker; however, only a computer with a TPM can provide the additional security of pre-startup system integrity verification and multifactor authentication.|
|BIOS configuration|<li> A Trusted Computing Group (TCG)-compliant BIOS or UEFI firmware.</li> <li> The boot order must be set to start first from the hard disk, and not the USB or CD drives.</li> <li> The firmware must be able to read from a USB flash drive during startup.</li>|
|File system|For computers that boot natively with UEFI firmware, at least one FAT32 partition for the system drive and one NTFS partition for the operating system drive. <br/> For computers with legacy BIOS firmware, at least two NTFS disk partitions, one for the system drive and one for the operating system drive. <br/> For either firmware, the system drive partition must be at least 350 megabytes (MB) and set as the active partition.|
@ -75,11 +75,11 @@ It is recommended that drives with little to no data utilize the **used disk spa
> [!NOTE]
> Deleted files appear as free space to the file system, which is not encrypted by **used disk space only**. Until they are wiped or overwritten, deleted files hold information that could be recovered with common data forensic tools.
Selecting an encryption type and choosing **Next** will give the user the option of running a BitLocker system check (selected by default) which will ensure that BitLocker can properly access the recovery and encryption keys before the volume encryption begins. It is recommended to run this system check before starting the encryption process. If the system check is not run and a problem is encountered when the operating system attempts to start, the user will need to provide the recovery key to start Windows.
Selecting an encryption type and choosing **Next** will give the user the option of running a BitLocker system check (selected by default) which will ensure that BitLocker can properly access the recovery and encryption keys before the volume encryption begins. We recommend running this system check before starting the encryption process. If the system check is not run and a problem is encountered when the operating system attempts to start, the user will need to provide the recovery key to start Windows.
After completing the system check (if selected), the BitLocker Drive Encryption Wizard will restart the computer to begin encryption. Upon reboot, users are required to enter the password chosen to boot into the operating system volume. Users can check encryption status by checking the system notification area or the BitLocker control panel.
Until encryption is completed, the only available options for managing BitLocker involve manipulation of the password protecting the operating system volume, backing up the recovery key, and turning BitLocker off.
Until encryption is completed, the only available options for managing BitLocker involve manipulation of the password protecting the operating system volume, backing up the recovery key, and turning off BitLocker.
### Data volume
@ -97,12 +97,12 @@ Encryption status displays in the notification area or within the BitLocker cont
There is a new option for storing the BitLocker recovery key using the OneDrive. This option requires that computers are not members of a domain and that the user is using a Microsoft Account. Local accounts do not give the option to utilize OneDrive. Using the OneDrive option is the default, recommended recovery key storage method for computers that are not joined to a domain.
Users can verify the recovery key was saved properly by checking their OneDrive for the BitLocker folder which is created automatically during the save process. The folder will contain two files, a readme.txt and the recovery key. For users storing more than one recovery password on their OneDrive,
Users can verify the recovery key was saved properly by checking their OneDrive for the BitLocker folder that is created automatically during the save process. The folder will contain two files, a readme.txt and the recovery key. For users storing more than one recovery password on their OneDrive,
they can identify the required recovery key by looking at the file name. The recovery key ID is appended to the end of the file name.
### Using BitLocker within Windows Explorer
Windows Explorer allows users to launch the BitLocker Drive Encryption wizard by right clicking on a volume and selecting **Turn On BitLocker**. This option is available on client computers by default. On servers, you must first install the BitLocker and Desktop-Experience features for this option to be available. After selecting **Turn on BitLocker**, the wizard works exactly as it does when launched using the BitLocker control panel.
Windows Explorer allows users to launch the BitLocker Drive Encryption wizard by right-clicking a volume and selecting **Turn On BitLocker**. This option is available on client computers by default. On servers, you must first install the BitLocker and Desktop-Experience features for this option to be available. After selecting **Turn on BitLocker**, the wizard works exactly as it does when launched using the BitLocker control panel.
## <a href="" id="bkmk-dep2"></a>Down-level compatibility
@ -118,13 +118,13 @@ Table 1: Cross compatibility for Windows 10, Windows 8.1, Windows 8, and Window
|Fully encrypted volume from Windows 7|Presents as fully encrypted|Presented as fully encrypted|N/A|
|Partially encrypted volume from Windows 7|Windows 10 and Windows 8.1 will complete encryption regardless of policy|Windows 8 will complete encryption regardless of policy|N/A|
## <a href="" id="bkmk-dep3"></a>Encrypting volumes using the manage-bde command line interface
## <a href="" id="bkmk-dep3"></a>Encrypting volumes using the manage-bde command-line interface
Manage-bde is a command-line utility that can be used for scripting BitLocker operations. Manage-bde offers additional options not displayed in the BitLocker control panel. For a complete list of the options, see [Manage-bde](/windows-server/administration/windows-commands/manage-bde).
Manage-bde offers a multitude of wider options for configuring BitLocker. This means that using the command syntax may require care and possibly later customization by the user. For example, using just the `manage-bde -on` command on a data volume will fully encrypt the volume without any authenticating protectors. A volume encrypted in this manner still requires user interaction to turn on BitLocker protection, even though the command successfully completed because an authentication method needs to be added to the volume for it to be fully protected.
Manage-bde offers a multitude of wider options for configuring BitLocker. So using the command syntax may require care and possibly later customization by the user. For example, using just the `manage-bde -on` command on a data volume will fully encrypt the volume without any authenticating protectors. A volume encrypted in this manner still requires user interaction to turn on BitLocker protection, even though the command successfully completed because an authentication method needs to be added to the volume for it to be fully protected.
Command line users need to determine the appropriate syntax for a given situation. The following section covers general encryption for operating system volumes and data volumes.
Command-line users need to determine the appropriate syntax for a given situation. The following section covers general encryption for operating system volumes and data volumes.
### Operating system volume
@ -136,7 +136,7 @@ A good practice when using manage-bde is to determine the volume status on the t
`manage-bde -status`
This command returns the volumes on the target, current encryption status and volume type (operating system or data) for each volume. Using this information, users can determine the best encryption method for their environment.
This command returns the volumes on the target, current encryption status, and volume type (operating system or data) for each volume. Using this information, users can determine the best encryption method for their environment.
**Enabling BitLocker without a TPM**
@ -149,29 +149,29 @@ manage-bde -on C:
**Enabling BitLocker with a TPM only**
It is possible to encrypt the operating system volume without any defined protectors using manage-bde. The command to do this is:
It is possible to encrypt the operating system volume without any defined protectors by using manage-bde. Use this command:
`manage-bde -on C:`
This will encrypt the drive using the TPM as the protector. If a user is unsure of the protector for a volume, they can use the -protectors option in manage-bde to list this information with the command:
This command will encrypt the drive using the TPM as the protector. If a user is unsure of the protector for a volume, they can use the -protectors option in manage-bde to list this information with the command:
`manage-bde -protectors -get <volume>`
**Provisioning BitLocker with two protectors**
Another example is a user on non-TPM hardware who wishes to add a password and SID-based protector to the operating system volume. In this instance, the user adds the protectors first. This is done with the command:
Another example is a user on non-TPM hardware who wishes to add a password and SID-based protector to the operating system volume. In this instance, the user adds the protectors first. Use this command:
`manage-bde -protectors -add C: -pw -sid <user or group>`
This command will require the user to enter and then confirm the password protector before adding them to the volume. With the protectors enabled on the volume, the user just needs to turn BitLocker on.
This command will require the user to enter and then confirm the password protector before adding them to the volume. With the protectors enabled on the volume, the user just needs to turn on BitLocker.
### Data volume
Data volumes use the same syntax for encryption as operating system volumes but they do not require protectors for the operation to complete. Encrypting data volumes can be done using the base command: `manage-bde -on <drive letter>` or users can choose to add protectors to the volume. It is recommended that at least one primary protector and a recovery protector be added to a data volume.
Data volumes use the same syntax for encryption as operating system volumes but they do not require protectors for the operation to complete. Encrypting data volumes can be done using the base command: `manage-bde -on <drive letter>` or users can choose to add protectors to the volume. We recommend that you add at least one primary protector and a recovery protector to a data volume.
**Enabling BitLocker with a password**
A common protector for a data volume is the password protector. In the example below, we add a password protector to the volume and turn BitLocker on.
A common protector for a data volume is the password protector. In the example below, we add a password protector to the volume and turn on BitLocker.
```powershell
manage-bde -protectors -add -pw C:
@ -322,7 +322,7 @@ Occasionally, all protectors may not be shown when using **Get-BitLockerVolume**
Get-BitLockerVolume C: | fl
```
If you wanted to remove the existing protectors prior to provisioning BitLocker on the volume, you can utilize the `Remove-BitLockerKeyProtector` cmdlet. Accomplishing this requires the GUID associated with the protector to be removed.
If you want to remove the existing protectors prior to provisioning BitLocker on the volume, you can utilize the `Remove-BitLockerKeyProtector` cmdlet. Accomplishing this task requires the GUID associated with the protector to be removed.
A simple script can pipe the values of each **Get-BitLockerVolume** return out to another variable as seen below:
```powershell
@ -330,7 +330,7 @@ $vol = Get-BitLockerVolume
$keyprotectors = $vol.KeyProtector
```
Using this, we can display the information in the **$keyprotectors** variable to determine the GUID for each protector.
Using this script, we can display the information in the **$keyprotectors** variable to determine the GUID for each protector.
Using this information, we can then remove the key protector for a specific volume using the command:
```powershell
@ -343,7 +343,8 @@ Remove-BitLockerKeyProtector <volume>: -KeyProtectorID "{GUID}"
### Operating system volume
Using the BitLocker Windows PowerShell cmdlets is similar to working with the manage-bde tool for encrypting operating system volumes. Windows PowerShell offers users a lot of flexibility. For example, users can add the desired protector as part command for encrypting the volume. Below are examples of common user scenarios and steps to accomplish them using the BitLocker cmdlets for Windows PowerShell.
To enable BitLocker with just the TPM protector. This can be done using the command:
To enable BitLocker with just the TPM protector, use this command:
```powershell
Enable-BitLocker C:
@ -357,7 +358,7 @@ Enable-BitLocker C: -StartupKeyProtector -StartupKeyPath <path> -SkipHardwareTes
### Data volume
Data volume encryption using Windows PowerShell is the same as for operating system volumes. You should add the desired protectors prior to encrypting the volume. The following example adds a password protector to the E: volume using the variable $pw as the password. The $pw variable is held as a SecureString value to store the user defined password. Last, encryption begins.
Data volume encryption using Windows PowerShell is the same as for operating system volumes. Add the desired protectors prior to encrypting the volume. The following example adds a password protector to the E: volume using the variable $pw as the password. The $pw variable is held as a SecureString value to store the user-defined password. Last, encryption begins.
```powershell
$pw = Read-Host -AsSecureString
@ -365,14 +366,14 @@ $pw = Read-Host -AsSecureString
Enable-BitLockerKeyProtector E: -PasswordProtector -Password $pw
```
### Using a SID based protector in Windows PowerShell
### Using a SID-based protector in Windows PowerShell
The ADAccountOrGroup protector is an Active Directory SID-based protector. This protector can be added to both operating system and data volumes, although it does not unlock operating system volumes in the pre-boot environment. The protector requires the SID for the domain account or group to link with the protector. BitLocker can protect a cluster-aware disk by adding a SID-based protector for the Cluster Name Object (CNO) that lets the disk properly failover and be unlocked to any member computer of the cluster.
The ADAccountOrGroup protector is an Active Directory SID-based protector. This protector can be added to both operating system and data volumes, although it does not unlock operating system volumes in the pre-boot environment. The protector requires the SID for the domain account or group to link with the protector. BitLocker can protect a cluster-aware disk by adding a SID-based protector for the Cluster Name Object (CNO) that lets the disk properly fail over and be unlocked to any member computer of the cluster.
> [!WARNING]
> The SID-based protector requires the use of an additional protector (such as TPM, PIN, recovery key, etc.) when used on operating system volumes.
To add an ADAccountOrGroup protector to a volume requires either the actual domain SID or the group name preceded by the domain and a backslash. In the example below, the CONTOSO\\Administrator account is added as a protector to the data volume G.
To add an ADAccountOrGroup protector to a volume, you need either the actual domain SID or the group name preceded by the domain and a backslash. In the example below, the CONTOSO\\Administrator account is added as a protector to the data volume G.
```powershell
Enable-BitLocker G: -AdAccountOrGroupProtector -AdAccountOrGroup CONTOSO\Administrator
@ -389,7 +390,7 @@ Get-ADUser -filter {samaccountname -eq "administrator"}
>
> **Tip:**  In addition to the Windows PowerShell command above, information about the locally logged on user and group membership can be found using: WHOAMI /ALL. This does not require the use of additional features.
In the example below, the user wishes to add a domain SID based protector to the previously encrypted operating system volume. The user knows the SID for the user account or group they wish to add and uses the following command:
In the example below, the user wishes to add a domain SID-based protector to the previously encrypted operating system volume. The user knows the SID for the user account or group they wish to add and uses the following command:
```powershell
Add-BitLockerKeyProtector C: -ADAccountOrGroupProtector -ADAccountOrGroup "<SID>"
@ -400,7 +401,7 @@ Add-BitLockerKeyProtector C: -ADAccountOrGroupProtector -ADAccountOrGroup "<SID>
## <a href="" id="bkmk-dep5"></a> Checking BitLocker status
To check the BitLocker status of a particular volume, administrators can look at the status of the drive in the BitLocker control panel applet, Windows Explorer, manage-bde command line tool, or Windows PowerShell cmdlets. Each option offers different levels of detail and ease of use. We will look at each of the available methods in the following section.
To check the BitLocker status of a particular volume, administrators can look at the status of the drive in the BitLocker control panel applet, Windows Explorer, manage-bde command-line tool, or Windows PowerShell cmdlets. Each option offers different levels of detail and ease of use. We will look at each of the available methods in the following section.
### Checking BitLocker status with the control panel
@ -421,7 +422,7 @@ Once BitLocker protector activation is completed, the completion notice is displ
### Checking BitLocker status with manage-bde
Administrators who prefer a command line interface can utilize manage-bde to check volume status. Manage-bde is capable of returning more information about the volume than the graphical user interface tools in the control panel. For example, manage-bde can display the BitLocker version in use, the encryption type, and the protectors associated with a volume.
Administrators who prefer a command-line interface can utilize manage-bde to check volume status. Manage-bde is capable of returning more information about the volume than the graphical user interface tools in the control panel. For example, manage-bde can display the BitLocker version in use, the encryption type, and the protectors associated with a volume.
To check the status of a volume using manage-bde, use the following command:
@ -446,7 +447,7 @@ This command will display information about the encryption method, volume type,
### Provisioning BitLocker during operating system deployment
Administrators can enable BitLocker prior to operating system deployment from the Windows Pre-installation Environment. This is done with a randomly generated clear key protector applied to the formatted volume and encrypting the volume prior to running the Windows setup process. If the encryption uses the Used Disk Space Only option described later in this document, this step takes only a few seconds and incorporates well into regular deployment processes.
Administrators can enable BitLocker prior to operating system deployment from the Windows Pre-installation Environment. This task is done with a randomly generated clear key protector applied to the formatted volume and encrypting the volume prior to running the Windows setup process. If the encryption uses the Used Disk Space Only option described later in this document, this step takes only a few seconds and incorporates well into regular deployment processes.
### Decrypting BitLocker volumes
@ -461,9 +462,9 @@ The control panel does not report decryption progress but displays it in the not
Once decryption is complete, the drive will update its status in the control panel and is available for encryption.
### Decrypting volumes using the manage-bde command line interface
### Decrypting volumes using the manage-bde command-line interface
Decrypting volumes using manage-bde is very straightforward. Decryption with manage-bde offers the advantage of not requiring user confirmation to start the process. Manage-bde uses the -off command to start the decryption process. A sample command for decryption is:
Decrypting volumes using manage-bde is straightforward. Decryption with manage-bde offers the advantage of not requiring user confirmation to start the process. Manage-bde uses the -off command to start the decryption process. A sample command for decryption is:
```powershell
manage-bde -off C:

101
windows/security/information-protection/bitlocker/bitlocker-deployment-and-administration-faq.md
View File

@ -1,101 +0,0 @@
---
title: BitLocker deployment and administration FAQ (Windows 10)
description: Browse frequently asked questions about BitLocker deployment and administration, such as, "Can BitLocker deployment be automated in an enterprise environment?"
ms.assetid: c40f87ac-17d3-47b2-afc6-6c641f72ecee
ms.reviewer:
ms.prod: w10
ms.mktglfcycl: explore
ms.sitesec: library
ms.pagetype: security
ms.localizationpriority: medium
author: dansimp
ms.author: dansimp
manager: dansimp
audience: ITPro
ms.collection: M365-security-compliance
ms.topic: conceptual
ms.date: 02/28/2019
ms.custom: bitlocker
---
# BitLocker frequently asked questions (FAQ)
**Applies to**
- Windows 10
## Can BitLocker deployment be automated in an enterprise environment?
Yes, you can automate the deployment and configuration of BitLocker and the TPM using either WMI or Windows PowerShell scripts. How you choose to implement the scripts depends on your environment. You can also use Manage-bde.exe to locally or remotely configure BitLocker. For more info about writing scripts that use the BitLocker WMI providers, see [BitLocker Drive Encryption Provider](https://go.microsoft.com/fwlink/p/?LinkId=80600). For more info about using Windows PowerShell cmdlets with BitLocker Drive Encryption, see [BitLocker Cmdlets in Windows PowerShell](https://docs.microsoft.com/powershell/module/bitlocker/index?view=win10-ps).
## Can BitLocker encrypt more than just the operating system drive?
Yes.
## Is there a noticeable performance impact when BitLocker is enabled on a computer?
Generally it imposes a single-digit percentage performance overhead.
## How long will initial encryption take when BitLocker is turned on?
Although BitLocker encryption occurs in the background while you continue to work, and the system remains usable, encryption times vary depending on the type of drive that is being encrypted, the size of the drive, and the speed of the drive. If you are encrypting very large drives, you may want to set encryption to occur during times when you will not be using the drive.
You can also choose whether or not BitLocker should encrypt the entire drive or just the used space on the drive when you turn on BitLocker. On a new hard drive, encrypting just the used spaced can be considerably faster than encrypting the entire drive. When this encryption option is selected, BitLocker automatically encrypts data as it is saved, ensuring that no data is stored unencrypted.
## What happens if the computer is turned off during encryption or decryption?
If the computer is turned off or goes into hibernation, the BitLocker encryption and decryption process will resume where it stopped the next time Windows starts. This is true even if the power is suddenly unavailable.
## Does BitLocker encrypt and decrypt the entire drive all at once when reading and writing data?
No, BitLocker does not encrypt and decrypt the entire drive when reading and writing data. The encrypted sectors in the BitLocker-protected drive are decrypted only as they are requested from system read operations. Blocks that are written to the drive are encrypted before the system writes them to the physical disk. No unencrypted data is ever stored on a BitLocker-protected drive.
## How can I prevent users on a network from storing data on an unencrypted drive?
You can configure Group Policy settings to require that data drives be BitLocker-protected before a BitLocker-protected computer can write data to them. For more info, see [BitLocker Group Policy settings](bitlocker-group-policy-settings.md).
When these policy settings are enabled, the BitLocker-protected operating system will mount any data drives that are not protected by BitLocker as read-only.
## What is Used Disk Space Only encryption?
BitLocker in Windows 10 lets users choose to encrypt just their data. Although it's not the most secure way to encrypt a drive, this option can reduce encryption time by more than 99 percent, depending on how much data that needs to be encrypted. For more information, see [Used Disk Space Only encryption](bitlocker-device-encryption-overview-windows-10.md#used-disk-space-only-encryption).
## What system changes would cause the integrity check on my operating system drive to fail?
The following types of system changes can cause an integrity check failure and prevent the TPM from releasing the BitLocker key to decrypt the protected operating system drive:
- Moving the BitLocker-protected drive into a new computer.
- Installing a new motherboard with a new TPM.
- Turning off, disabling, or clearing the TPM.
- Changing any boot configuration settings.
- Changing the BIOS, UEFI firmware, master boot record, boot sector, boot manager, option ROM, or other early boot components or boot configuration data.
## What causes BitLocker to start into recovery mode when attempting to start the operating system drive?
Because BitLocker is designed to protect your computer from numerous attacks, there are numerous reasons why BitLocker could start in recovery mode.
For example:
- Changing the BIOS boot order to boot another drive in advance of the hard drive.
- Adding or removing hardware, such as inserting a new card in the computer, including some PCMIA wireless cards.
- Removing, inserting, or completely depleting the charge on a smart battery on a portable computer.
In BitLocker, recovery consists of decrypting a copy of the volume master key using either a recovery key stored on a USB flash drive or a cryptographic key derived from a recovery password.
The TPM is not involved in any recovery scenarios, so recovery is still possible if the TPM fails boot component validation, malfunctions, or is removed.
## What can prevent BitLocker from binding to PCR 7?
This happens if a non-Windows OS booted prior to Windows, or if Secure Boot is not available to the device, either because it has been disabled or the hardware does not support it.
## Can I swap hard disks on the same computer if BitLocker is enabled on the operating system drive?
Yes, you can swap multiple hard disks on the same computer if BitLocker is enabled, but only if the hard disks were BitLocker-protected on the same computer. The BitLocker keys are unique to the TPM and operating system drive, so if you want to prepare a backup operating system or data drive for use in case of disk failure, you need to make sure that they were matched with the correct TPM. You can also configure different hard drives for different operating systems and then enable BitLocker on each one with different authentication methods (such as one with TPM-only and one with TPM+PIN) without any conflicts.
## Can I access my BitLocker-protected drive if I insert the hard disk into a different computer?
Yes, if the drive is a data drive, you can unlock it from the **BitLocker Drive Encryption** Control Panel item just as you would any other data drive by using a password or smart card. If the data drive was configured for automatic unlock only, you will have to unlock it by using the recovery key. The encrypted hard disk can be unlocked by a data recovery agent (if one was configured) or it can be unlocked by using the recovery key.
## Why is "Turn BitLocker on" not available when I right-click a drive?
Some drives cannot be encrypted with BitLocker. Reasons a drive cannot be encrypted include insufficient disk size, an incompatible file system, if the drive is a dynamic disk, or a drive is designated as the system partition. By default, the system drive (or system partition) is hidden from display. However, if it is not created as a hidden drive when the operating system was installed due to a custom installation process, that drive might be displayed but cannot be encrypted.
## What type of disk configurations are supported by BitLocker?
Any number of internal, fixed data drives can be protected with BitLocker. On some versions ATA and SATA-based, direct-attached storage devices are also supported.

96
windows/security/information-protection/bitlocker/bitlocker-deployment-and-administration-faq.yml Normal file
View File

@ -0,0 +1,96 @@
### YamlMime:FAQ
metadata:
title: BitLocker deployment and administration FAQ (Windows 10)
description: Browse frequently asked questions about BitLocker deployment and administration, such as, "Can BitLocker deployment be automated in an enterprise environment?"
ms.assetid: c40f87ac-17d3-47b2-afc6-6c641f72ecee
ms.reviewer:
ms.prod: w10
ms.mktglfcycl: explore
ms.sitesec: library
ms.pagetype: security
ms.localizationpriority: medium
author: dansimp
ms.author: dansimp
manager: dansimp
audience: ITPro
ms.collection: M365-security-compliance
ms.topic: conceptual
ms.date: 02/28/2019
ms.custom: bitlocker
title: BitLocker frequently asked questions (FAQ)
summary: |
**Applies to**
- Windows 10
sections:
- name: Ignored
questions:
- question: Can BitLocker deployment be automated in an enterprise environment?
answer: |
Yes, you can automate the deployment and configuration of BitLocker and the TPM using either WMI or Windows PowerShell scripts. How you choose to implement the scripts depends on your environment. You can also use Manage-bde.exe to locally or remotely configure BitLocker. For more info about writing scripts that use the BitLocker WMI providers, see [BitLocker Drive Encryption Provider](https://go.microsoft.com/fwlink/p/?LinkId=80600). For more info about using Windows PowerShell cmdlets with BitLocker Drive Encryption, see [BitLocker Cmdlets in Windows PowerShell](https://docs.microsoft.com/powershell/module/bitlocker/index?view=win10-ps).
- question: Can BitLocker encrypt more than just the operating system drive?
answer: Yes.
- question: Is there a noticeable performance impact when BitLocker is enabled on a computer?
answer: Typically, there's a small performance overhead, often in single-digit percentages, which is relative to the throughput of the storage operations on which it needs to operate.
- question: How long will initial encryption take when BitLocker is turned on?
answer: |
Although BitLocker encryption occurs in the background while you continue to work, and the system remains usable, encryption times vary depending on the type of drive that is being encrypted, the size of the drive, and the speed of the drive. If you are encrypting large drives, you may want to set encryption to occur during times when you will not be using the drive.
You can also choose whether or not BitLocker should encrypt the entire drive or just the used space on the drive when you turn on BitLocker. On a new hard drive, encrypting just the used spaced can be considerably faster than encrypting the entire drive. When this encryption option is selected, BitLocker automatically encrypts data as it is saved, ensuring that no data is stored unencrypted.
- question: What happens if the computer is turned off during encryption or decryption?
answer: If the computer is turned off or goes into hibernation, the BitLocker encryption and decryption process will resume where it stopped the next time Windows starts. This is true even if the power is suddenly unavailable.
- question: Does BitLocker encrypt and decrypt the entire drive all at once when reading and writing data?
answer: No, BitLocker does not encrypt and decrypt the entire drive when reading and writing data. The encrypted sectors in the BitLocker-protected drive are decrypted only as they are requested from system read operations. Blocks that are written to the drive are encrypted before the system writes them to the physical disk. No unencrypted data is ever stored on a BitLocker-protected drive.
- question: How can I prevent users on a network from storing data on an unencrypted drive?
answer: |
You can configure Group Policy settings to require that data drives be BitLocker-protected before a BitLocker-protected computer can write data to them. For more info, see [BitLocker Group Policy settings](bitlocker-group-policy-settings.md).
When these policy settings are enabled, the BitLocker-protected operating system will mount any data drives that are not protected by BitLocker as read-only.
- question: What is Used Disk Space Only encryption?
answer: |
BitLocker in Windows 10 lets users choose to encrypt just their data. Although it's not the most secure way to encrypt a drive, this option can reduce encryption time by more than 99 percent, depending on how much data that needs to be encrypted. For more information, see [Used Disk Space Only encryption](bitlocker-device-encryption-overview-windows-10.md#used-disk-space-only-encryption).
- question: What system changes would cause the integrity check on my operating system drive to fail?
answer: |
The following types of system changes can cause an integrity check failure and prevent the TPM from releasing the BitLocker key to decrypt the protected operating system drive:
- Moving the BitLocker-protected drive into a new computer.
- Installing a new motherboard with a new TPM.
- Turning off, disabling, or clearing the TPM.
- Changing any boot configuration settings.
- Changing the BIOS, UEFI firmware, master boot record, boot sector, boot manager, option ROM, or other early boot components or boot configuration data.
- question: What causes BitLocker to start into recovery mode when attempting to start the operating system drive?
answer: |
Because BitLocker is designed to protect your computer from numerous attacks, there are numerous reasons why BitLocker could start in recovery mode.
For example:
- Changing the BIOS boot order to boot another drive in advance of the hard drive.
- Adding or removing hardware, such as inserting a new card in the computer, including some PCMIA wireless cards.
- Removing, inserting, or completely depleting the charge on a smart battery on a portable computer.
In BitLocker, recovery consists of decrypting a copy of the volume master key using either a recovery key stored on a USB flash drive or a cryptographic key derived from a recovery password.
The TPM is not involved in any recovery scenarios, so recovery is still possible if the TPM fails boot component validation, malfunctions, or is removed.
- question: What can prevent BitLocker from binding to PCR 7?
answer: BitLocker can be prevented from binding to PCR 7 if a non-Windows OS booted prior to Windows, or if Secure Boot is not available to the device, either because it has been disabled or the hardware does not support it.
- question: Can I swap hard disks on the same computer if BitLocker is enabled on the operating system drive?
answer: Yes, you can swap multiple hard disks on the same computer if BitLocker is enabled, but only if the hard disks were BitLocker-protected on the same computer. The BitLocker keys are unique to the TPM and operating system drive. So if you want to prepare a backup operating system or data drive in case a disk fails, make sure that they were matched with the correct TPM. You can also configure different hard drives for different operating systems and then enable BitLocker on each one with different authentication methods (such as one with TPM-only and one with TPM+PIN) without any conflicts.
- question: Can I access my BitLocker-protected drive if I insert the hard disk into a different computer?
answer: Yes, if the drive is a data drive, you can unlock it from the **BitLocker Drive Encryption** Control Panel item just as you would any other data drive by using a password or smart card. If the data drive was configured for automatic unlock only, you will have to unlock it by using the recovery key. The encrypted hard disk can be unlocked by a data recovery agent (if one was configured) or it can be unlocked by using the recovery key.
- question: Why is "Turn BitLocker on" not available when I right-click a drive?
answer: Some drives cannot be encrypted with BitLocker. Reasons a drive cannot be encrypted include insufficient disk size, an incompatible file system, if the drive is a dynamic disk, or a drive is designated as the system partition. By default, the system drive (or system partition) is hidden from display. However, if it is not created as a hidden drive when the operating system was installed due to a custom installation process, that drive might be displayed but cannot be encrypted.
- question: What type of disk configurations are supported by BitLocker?
answer: Any number of internal, fixed data drives can be protected with BitLocker. On some versions ATA and SATA-based, direct-attached storage devices are also supported.

3
windows/security/information-protection/bitlocker/bitlocker-device-encryption-overview-windows-10.md
View File

@ -82,6 +82,9 @@ Microsoft recommends that BitLocker Device Encryption be enabled on any systems
Administrators can manage domain-joined devices that have BitLocker device encryption enabled through Microsoft BitLocker Administration and Monitoring (MBAM). In this case, BitLocker device encryption automatically makes additional BitLocker options available. No conversion or encryption is required, and MBAM can manage the full BitLocker policy set if any configuration changes are required.
> [!NOTE]
> BitLocker Device Encryption uses the XTS-AES 128-bit encryption method. In case you need to use a different encryption method and/or cipher strength, the device must be configured and decrypted (if already encrypted) first. After that, different BitLocker settings can be applied.
## Used Disk Space Only encryption
BitLocker in earlier Windows versions could take a long time to encrypt a drive, because it encrypted every byte on the volume (including parts that did not have data). That is still the most secure way to encrypt a drive, especially if a drive has previously contained confidential data that has since been moved or deleted. In that case, traces of the confidential data could remain on portions of the drive marked as unused.

4
windows/security/information-protection/bitlocker/bitlocker-frequently-asked-questions.md
View File

@ -25,9 +25,9 @@ ms.custom: bitlocker
This topic links to frequently asked questions about BitLocker. BitLocker is a data protection feature that encrypts drives on your computer to help prevent data theft or exposure. BitLocker-protected computers can also delete data more securely when they are decommissioned because it is much more difficult to recover deleted data from an encrypted drive than from a non-encrypted drive.
- [Overview and requirements](bitlocker-overview-and-requirements-faq.md)
- [Overview and requirements](bitlocker-overview-and-requirements-faq.yml)
- [Upgrading](bitlocker-upgrading-faq.md)
- [Deployment and administration](bitlocker-deployment-and-administration-faq.md)
- [Deployment and administration](bitlocker-deployment-and-administration-faq.yml)
- [Key management](bitlocker-key-management-faq.md)
- [BitLocker To Go](bitlocker-to-go-faq.md)
- [Active Directory Domain Services (AD DS)](bitlocker-and-adds-faq.md)

7
windows/security/information-protection/bitlocker/bitlocker-group-policy-settings.md
View File

@ -20,9 +20,9 @@ ms.custom: bitlocker
# BitLocker Group Policy settings
**Applies to**
**Applies to:**
- Windows 10
- Windows 10, Windows Server 2019, Windows Server 2016, Windows 8.1, and Windows Server 2012 R2
This topic for IT professionals describes the function, location, and effect of each Group Policy setting that is used to manage BitLocker Drive Encryption.
@ -37,6 +37,9 @@ Most of the BitLocker Group Policy settings are applied when BitLocker is initia
If multiple changes are necessary to bring the drive into compliance, you must suspend BitLocker protection, make the necessary changes, and then resume protection. This situation could occur, for example, if a removable drive was initially configured to be unlocked with a password and then Group
Policy settings are changed to disallow passwords and require smart cards. In this situation, you need to suspend BitLocker protection by using the [Manage-bde](/windows-server/administration/windows-commands/manage-bde) command-line tool, delete the password unlock method, and add the smart card method. After this is complete, BitLocker is compliant with the Group Policy setting and BitLocker protection on the drive can be resumed.
> [!NOTE]
> For more details about Active Directory configuration related to BitLocker enablement, please see [Set up MDT for BitLocker](https://docs.microsoft.com/windows/deployment/deploy-windows-mdt/set-up-mdt-for-bitlocker).
## <a href="" id="bkmk-gptop"></a>BitLocker Group Policy settings
The following sections provide a comprehensive list of BitLocker Group Policy settings that are organized by usage. BitLocker Group Policy settings include settings for specific drive types (operating system drives, fixed data drives, and removable data drives) and settings that are applied to all drives.

365
windows/security/information-protection/bitlocker/bitlocker-how-to-enable-network-unlock.md
View File

@ -1,6 +1,6 @@
---
title: BitLocker How to enable Network Unlock (Windows 10)
description: This topic for the IT professional describes how BitLocker Network Unlock works and how to configure it.
title: BitLocker - How to enable Network Unlock (Windows 10)
description: This article for the IT professional describes how BitLocker Network Unlock works and how to configure it.
ms.assetid: be45bc28-47db-4931-bfec-3c348151d2e9
ms.reviewer:
ms.prod: w10
@ -23,178 +23,168 @@ ms.custom: bitlocker
**Applies to**
- Windows 10
This topic for the IT professional describes how BitLocker Network Unlock works and how to configure it.
This article for IT professionals describes how BitLocker Network Unlock works and how to configure it.
Network Unlock was introduced in Windows 8 and Windows Server 2012 as a BitLocker protector option for operating system volumes. Network Unlock enables easier management for BitLocker enabled desktops and servers in a domain environment by providing automatic unlock of operating system volumes at system reboot when connected to a wired corporate network. This feature requires the client hardware to have a DHCP driver implemented in its UEFI firmware.
Without Network Unlock, operating system volumes protected by TPM+PIN protectors require a PIN to be entered when a computer reboots or resumes from hibernation (for example, by Wake on LAN). This can make it difficult to enterprises to roll out software patches to unattended desktops and remotely administered servers.
Network Unlock was introduced in Windows 8 and Windows Server 2012 as a BitLocker protector option for operating system volumes. Network Unlock helps you manage BitLocker-enabled desktops and servers in a domain environment by automatically unlocking operating system volumes when the system is rebooted and is connected to a wired corporate network. This feature requires the client hardware to have a DHCP driver implemented in its UEFI firmware.
Network Unlock allows BitLocker-enabled systems with TPM+PIN and that meet the hardware requirements to boot into Windows without user intervention. Network Unlock works in a similar fashion to the TPM+StartupKey at boot. Rather than needing to read the StartupKey from USB media, however, the key for Network Unlock is composed from a key stored in the TPM and an encrypted network key that is sent to the server, decrypted and returned to the client in a secure session.
Without Network Unlock, operating system volumes that use TPM+PIN protectors require a PIN when a computer reboots or resumes after hibernation (for example, by Wake on LAN). For enterprises, this setup can make software patches difficult to roll out to unattended desktops and remotely administered servers.
This topic contains:
- [Network Unlock core requirements](#bkmk-nunlockcorereqs)
- [Network Unlock sequence](#bkmk-networkunlockseq)
- [Configure Network Unlock](#bkmk-configuringnetworkunlock)
- [Create the certificate template for Network Unlock](#bkmk-createcerttmpl)
- [Turning off Network Unlock](#bkmk-turnoffnetworkunlock)
- [Update Network Unlock certificates](#bkmk-updatecerts)
- [Troubleshoot Network Unlock](#bkmk-troubleshoot)
- [Configure Network Unlock on unsupported systems](#bkmk-unsupportedsystems)
Network Unlock allows BitLocker-enabled systems that use TPM+PIN and that meet the hardware requirements to boot into Windows without user intervention. Network Unlock works like the TPM+StartupKey at boot. But the StartupKey doesn't need to be read from USB media. Instead, the key for Network Unlock is composed from a key that's stored in the TPM and an encrypted network key that's sent to the server. It's decrypted and returned to the client in a secure session.
## <a href="" id="bkmk-nunlockcorereqs"></a>Network Unlock core requirements
Network Unlock must meet mandatory hardware and software requirements before the feature can automatically unlock domain joined systems. These requirements include:
Network Unlock requires the following mandatory hardware and software configurations before it can automatically unlock domain-joined systems:
- You must be running at least Windows 8 or Windows Server 2012.
- Any supported operating system with UEFI DHCP drivers can be Network Unlock clients.
- Network Unlock clients must have a TPM chip and at least one TPM protector.
- A server running the Windows Deployment Services (WDS) role on any supported server operating system.
- BitLocker Network Unlock optional feature installed on any supported server operating system.
- A DHCP server, separate from the WDS server.
- Properly configured public/private key pairing.
- Network Unlock Group Policy settings configured.
- Any supported operating system that uses UEFI DHCP drivers can be a Network Unlock client.
- Network Unlock clients must have a TPM (trusted platform module) chip and at least one TPM protector.
- You must have a server running the Windows Deployment Services (WDS) role on any supported server operating system.
- The BitLocker Network Unlock optional feature can be installed on any supported server operating system.
- You must have a DHCP server, separate from the WDS server.
- You must have a properly configured public/private key pairing.
- Network Unlock Group Policy settings must be configured.
The network stack must be enabled to use the Network Unlock feature. Equipment manufacturers deliver their products in various states and with different BIOS menus, so you need to confirm that the network stack has been enabled in the BIOS before starting the computer.
The network stack must be enabled to use the Network Unlock feature. Equipment manufacturers deliver their products in various states and with different BIOS menus. So confirm that the network stack has been enabled in the BIOS before you start the computer.
> [!NOTE]
> To properly support DHCP within UEFI, the UEFI-based system should be in native mode without a compatibility support module (CSM) enabled.
> To properly support DHCP within UEFI, the UEFI-based system should be in native mode and shouldn't have a compatibility support module (CSM) enabled.
For Network Unlock to work reliably on computers running Windows 8 and later, the first network adapter on the computer, usually the onboard adapter, must be configured to support DHCP and used for Network Unlock. This is especially worth noting when you have multiple adapters, and you wish to configure one without DHCP, such as for a lights-out management protocol. This configuration is necessary because Network Unlock will stop enumerating adapters when it reaches one with a DHCP port failure for any reason. Thus, if the first enumerated adapter does not support DHCP, is not plugged into the network, or fails to report availability of the DHCP port for any reason, then Network Unlock will fail.
On computers that run Windows 8 and later, the first network adapter on the computer, usually the onboard adapter, must be configured to support DHCP. This adapter must be used for Network Unlock.
Use this configuration especially when you have multiple adapters and you want to configure one without DHCP, such as for a lights-out management protocol. The configuration is necessary because Network Unlock stops enumerating adapters when it reaches an adapter that has a DHCP port that has failed for any reason. So if the first enumerated adapter doesn't support DHCP, isn't plugged into the network, or fails to report availability of the DHCP port for any reason, then Network Unlock will fail.
The Network Unlock server component installs on supported versions of Windows Server 2012 and later as a Windows feature using Server Manager or Windows PowerShell cmdlets. The feature name is BitLocker Network Unlock in Server Manager and BitLocker-NetworkUnlock in Windows PowerShell. This feature is a core requirement.
On supported versions of Windows Server 2012 and later, the Network Unlock server component installs as a Windows feature. It uses Server Manager or Windows PowerShell cmdlets. In Server Manager, the feature name is BitLocker Network Unlock. In Windows PowerShell, the feature name is BitLocker-NetworkUnlock. This feature is a core requirement.
Network Unlock requires Windows Deployment Services (WDS) in the environment where the feature will be utilized. Configuration of the WDS installation is not required; however, the WDS service needs to be running on the server.
Network Unlock requires WDS in the environment where the feature will be used. Configuration of the WDS installation isn't required. But the WDS service must be running on the server.
The network key is stored on the system drive along with an AES 256 session key, and encrypted with the 2048-bit RSA public key of the unlock server's certificate. The network key is decrypted with the help of a provider on a supported version of Windows Server running WDS, and returned encrypted with its corresponding session key.
The network key is stored on the system drive along with an AES 256 session key. It's encrypted with the 2048-bit RSA public key of the unlock server's certificate. The network key is decrypted with the help of a provider on a supported version of Windows Server that's running WDS. The network key is returned encrypted with its corresponding session key.
## <a href="" id="bkmk-networkunlockseq"></a>Network Unlock sequence
The unlock sequence starts on the client side, when the Windows boot manager detects the existence of Network Unlock protector. It leverages the DHCP driver in UEFI to obtain an IP address for IPv4 and then broadcasts a vendor-specific DHCP request that contains the network key and a session key for the reply, all encrypted by the server's Network Unlock certificate, as described above. The Network Unlock provider on the supported WDS server recognizes the vendor-specific request, decrypts it with the RSA private key, and returns the network key encrypted with the session key via its own vendor-specific DHCP reply.
The unlock sequence starts on the client side, when the Windows boot manager detects the existence of the Network Unlock protector. It uses the DHCP driver in UEFI to get an IP address for IPv4. Then it broadcasts a vendor-specific DHCP request that contains the network key and a session key for the reply, all encrypted by the server's Network Unlock certificate, as described earlier. The Network Unlock provider on the supported WDS server recognizes the vendor-specific request, decrypts it with the RSA private key, and returns the network key encrypted with the session key via its own vendor-specific DHCP reply.
On the server side, the WDS server role has an optional plugin component, like a PXE provider, which is what handles the incoming Network Unlock requests. The provider can also be configured with subnet restrictions, which would require that the IP address provided by the client in the Network Unlock request belong to a permitted subnet in order to release the network key to the client. In instances where the Network Unlock provider is unavailable, BitLocker fails over to the next available protector to unlock the drive. In a typical configuration, this means the standard TPM+PIN unlock screen is presented to unlock the drive.
On the server side, the WDS server role has an optional plug-in component, like a PXE (preboot execution environment) provider. The plug-in component handles the incoming Network Unlock requests. The provider can also be configured with subnet restrictions. These restrictions require the IP address that's provided by the client in the Network Unlock request to belong to a permitted subnet in order to release the network key to the client. If the Network Unlock provider is unavailable, then BitLocker fails over to the next available protector to unlock the drive. So in a typical configuration, the standard TPM+PIN unlock screen is presented to unlock the drive.
The server side configuration to enable Network Unlock also requires provisioning a 2048-bit RSA public/private key pair in the form of an X.509 certificate, and for the public key certificate to be distributed to the clients. This certificate must be managed and deployed through the Group Policy editor directly on a domain controller with at least a Domain Functional Level of Windows Server 2012. This certificate is the public key that encrypts the intermediate network key (which is one of the two secrets required to unlock the drive; the other secret is stored in the TPM).
The server-side configuration to enable Network Unlock requires provisioning a 2048-bit RSA public/private key pair in the form of an X.509 certificate. The configuration also requires the public key certificate to be distributed to the clients.
![bitlocker network unlock sequence](images/bitlockernetworkunlocksequence.png)
Manage and deploy this certificate through the Group Policy editor directly on a domain controller that has a domain functional level of at least Windows Server 2012. This certificate is the public key that encrypts the intermediate network key. The intermediate network key is one of the two secrets that are required to unlock the drive; the other secret is stored in the TPM.
**Phases in the Network Unlock process**
![Diagram showing the BitLocker network unlock sequence.](images/bitlockernetworkunlocksequence.png)
1. The Windows boot manager detects that a Network Unlock protector exists in the BitLocker configuration.
2. The client computer uses its DHCP driver in the UEFI to obtain a valid IPv4 IP address.
The Network Unlock process follows these phases:
1. The Windows boot manager detects a Network Unlock protector in the BitLocker configuration.
2. The client computer uses its DHCP driver in the UEFI to get a valid IPv4 IP address.
3. The client computer broadcasts a vendor-specific DHCP request that contains:
1. A Network Key (a 256-bit intermediate key) encrypted using the 2048-bit RSA Public Key of the Network Unlock certificate from the WDS server.
2. An AES-256 session key for the reply.
- A network key (a 256-bit intermediate key) that's encrypted by the 2048-bit RSA public key of the Network Unlock certificate from the WDS server.
- An AES-256 session key for the reply.
4. The Network Unlock provider on the WDS server recognizes the vendor-specific request.
5. The provider decrypts it with the WDS server’s BitLocker Network Unlock certificate RSA private key.
6. The WDS provider then returns the network key encrypted with the session key using its own vendor-specific DHCP reply to the client computer. This forms an intermediate key.
7. The returned intermediate key is then combined with another local 256-bit intermediate key that can only be decrypted by the TPM.
5. The provider decrypts the request by using the WDS server's BitLocker Network Unlock certificate RSA private key.
6. The WDS provider returns the network key encrypted with the session key by using its own vendor-specific DHCP reply to the client computer. This key is an intermediate key.
7. The returned intermediate key is combined with another local 256-bit intermediate key. This key can be decrypted only by the TPM.
8. This combined key is used to create an AES-256 key that unlocks the volume.
9. Windows continues the boot sequence.
## <a href="" id="bkmk-configuringnetworkunlock"></a>Configure Network Unlock
The following steps allow an administrator to configure Network Unlock in a domain where the Domain Functional Level is at least Windows Server 2012.
The following steps allow an administrator to configure Network Unlock in a domain where the functional level is at least Windows Server 2012.
### <a href="" id="bkmk-installwdsrole"><a/>Install the WDS Server role
### <a href="" id="bkmk-installwdsrole"></a>Install the WDS server role
The BitLocker Network Unlock feature will install the WDS role if it is not already installed. If you want to install it separately before you install BitLocker Network Unlock you can use Server Manager or Windows PowerShell. To install the role using Server Manager, select the **Windows Deployment Services** role in Server Manager.
The BitLocker Network Unlock feature installs the WDS role if it's not already installed. If you want to install it separately before you install BitLocker Network Unlock, use Server Manager or Windows PowerShell. To install the role in Server Manager, select the **Windows Deployment Services** role.
To install the role using Windows PowerShell, use the following command:
To install the role by using Windows PowerShell, use the following command:
```powershell
Install-WindowsFeature WDS-Deployment
```
You must configure the WDS server so that it can communicate with DHCP (and optionally Active Directory Domain Services) and the client computer. You can do using the WDS management tool, wdsmgmt.msc, which starts the Windows Deployment Services Configuration Wizard.
Configure the WDS server so that it can communicate with DHCP (and optionally Active Directory Domain Services) and the client computer. Use the WDS management tool, `wdsmgmt.msc`. This tool starts the Windows Deployment Services Configuration Wizard.
### <a href="" id="bkmk-confirmwdsrunning"><a/>Confirm the WDS Service is running
### <a href="" id="bkmk-confirmwdsrunning"></a>Confirm the WDS service is running
To confirm the WDS service is running, use the Services Management Console or Windows PowerShell. To confirm the service is running in Services Management Console, open the console using **services.msc** and check the status of the Windows Deployment Services service.
To confirm the WDS service is running, use the Services Management console or Windows PowerShell. To confirm the service is running in the Services Management console, open the console by using `services.msc`. Then check the status of the WDS service.
To confirm the service is running using Windows PowerShell, use the following command:
To confirm the service is running by using Windows PowerShell, use the following command:
```powershell
Get-Service WDSServer
```
### <a href="" id="bkmk-installnufeature"><a/>Install the Network Unlock feature
### <a href="" id="bkmk-installnufeature"></a>Install the Network Unlock feature
To install the Network Unlock feature, use Server Manager or Windows PowerShell. To install the feature using Server Manager, select the **BitLocker Network Unlock** feature in the Server Manager console.
To install the Network Unlock feature, use Server Manager or Windows PowerShell. To install the feature in the Server Manager console, select **BitLocker Network Unlock**.
To install the feature using Windows PowerShell, use the following command:
To install the feature by using Windows PowerShell, use the following command:
```powershell
Install-WindowsFeature BitLocker-NetworkUnlock
```
### <a href="" id="bkmk-createcerttmpl"><a/>Create the certificate template for Network Unlock
### <a href="" id="bkmk-createcerttmpl"></a>Create the certificate template for Network Unlock
A properly configured Active Directory Services Certification Authority can use this certificate template to create and issue Network Unlock certificates.
A properly configured Active Directory Services Certification Authority can use the certificate template to create and issue Network Unlock certificates. To create a certificate template:
1. Open the Certificates Template snap-in (certtmpl.msc).
2. Locate the User template. Right-click the template name and select **Duplicate Template**.
3. On the **Compatibility** tab, change the **Certification Authority** and **Certificate recipient** fields to Windows Server 2012 and Windows 8 respectively. Ensure the **Show resulting changes** dialog box is selected.
4. Select the **General** tab of the template. The **Template display name** and **Template name** should clearly identify that the template will be used for Network Unlock. Clear the checkbox for the **Publish certificate in Active Directory** option.
5. Select the **Request Handling** tab. Select **Encryption** from the **Purpose** drop down menu. Ensure the **Allow private key to be exported** option is selected.
6. Select the **Cryptography** tab. Set the **Minimum key size** to 2048. (Any Microsoft cryptographic provider that supports RSA can be used for this template, but for simplicity and forward compatibility we recommend using the **Microsoft Software Key Storage Provider**.)
7. Select the **Requests must use one of the following providers** option and clear all options except for the cryptography provider you selected, such as the **Microsoft Software Key Storage Provider**.
8. Select the **Subject Name** tab. Select **Supply in the request**. Select **OK** if the certificate templates pop-up dialog appears.
9. Select the **Issuance Requirements** tab. Select both **CA certificate manager approval** and **Valid existing certificate** options.
10. Select the **Extensions** tab. Select **Application Policies** and choose **Edit…**.
11. In the **Edit Application Policies Extension** options dialog box, select **Client Authentication**, **Encrypting File System**, **and Secure Email** and choose **Remove**.
12. On the **Edit Application Policies Extension** dialog box, select **Add**.
13. On the **Add Application Policy** dialog box, select **New**. In the **New Application Policy** dialog box enter the following information in the space provided and then click **OK** to create the BitLocker Network Unlock application policy:
1. Open the certificate template snap-in (`certtmpl.msc`).
2. Locate the user template. Right-click the template name, and then select **Duplicate Template**.
3. On the **Compatibility** tab, change the **Certification Authority** and **Certificate recipient** fields to **Windows Server 2012** and **Windows 8**, respectively. Ensure **Show resulting changes** is selected.
4. Select the **General** tab of the template. The **Template display name** and **Template name** should clearly identify that the template will be used for Network Unlock. Clear the check box for **Publish certificate in Active Directory**.
5. Select the **Request Handling** tab. In the **Purpose** drop-down menu, select **Encryption**. Ensure the **Allow private key to be exported** option is selected.
6. Select the **Cryptography** tab. Set the **Minimum key size** to **2048**. (For this template, you can use any Microsoft cryptographic provider that supports RSA. But for simplicity and forward compatibility, we recommend using **Microsoft Software Key Storage Provider**.)
7. Select **Requests must use one of the following providers**. Then clear all options except for your selected cryptography provider, such as the **Microsoft Software Key Storage Provider**.
8. Select the **Subject Name** tab. Select **Supply in the request**. If the certificate templates dialog box appears, select **OK**.
9. Select the **Issuance Requirements** tab. Then select both **CA certificate manager approval** and **Valid existing certificate**.
10. Select the **Extensions** tab. Then select **Application Policies** > **Edit**.
11. In the **Edit Application Policies Extension** dialog box, select **Client Authentication**, **Encrypting File System**, and **Secure Email**. Then choose **Remove**.
12. In the **Edit Application Policies Extension** dialog box, select **Add**.
13. In the **Add Application Policy** dialog box, select **New**. In the **New Application Policy** dialog box, enter the following information in the space provided, and then select **OK** to create the BitLocker Network Unlock application policy.
- **Name:** **BitLocker Network Unlock**
- **Object Identifier:** **1.3.6.1.4.1.311.67.1.1**
- **Name**: **BitLocker Network Unlock**
- **Object Identifier**: **1.3.6.1.4.1.311.67.1.1**
14. Select the newly created **BitLocker Network Unlock** application policy and select **OK**.
15. With the **Extensions** tab still open, select the **Edit Key Usage Extension** dialog, select the **Allow key exchange only with key encryption (key encipherment)** option. Select the **Make this extension critical** option.
14. Select the newly created **BitLocker Network Unlock** application policy, and then select **OK**.
15. With the **Extensions** tab still open, select **Edit Key Usage Extension**, and then select **Allow key exchange only with key encryption (key encipherment)**. Then select **Make this extension critical**.
16. Select the **Security** tab. Confirm that the **Domain Admins** group has been granted **Enroll** permission.
17. Select **OK** to complete configuration of the template.
To add the Network Unlock template to the Certification Authority, open the Certification Authority snap-in (certsrv.msc). Right-click the **Certificate Templates** item and choose **New, Certificate Template to issue**. Select the previously created BitLocker Network Unlock certificate.
To add the Network Unlock template to the certificate authority, open the certificate authority snap-in (`certsrv.msc`). Right-click **Certificate Templates**, and then choose **New, Certificate Template to issue**. Select the previously created BitLocker Network Unlock certificate.
After adding the Network Unlock template to the Certification Authority, this certificate can be used to configure BitLocker Network Unlock.
After you add the Network Unlock template to the certificate authority, you can use this certificate to configure BitLocker Network Unlock.
### <a href="" id="bkmk-createcert"><a/>Create the Network Unlock certificate
### <a href="" id="bkmk-createcert"></a>Create the Network Unlock certificate
Network Unlock can use imported certificates from an existing PKI infrastructure, or you can use a self-signed certificate.
Network Unlock can use imported certificates from an existing public key infrastructure (PKI). Or it can use a self-signed certificate.
To enroll a certificate from an existing certification authority (CA), do the following:
To enroll a certificate from an existing certificate authority:
1. Open Certificate Manager on the WDS server using **certmgr.msc**
2. Under the Certificates - Current User item, right-click Personal
3. Select All Tasks, then **Request New Certificate**
4. Select **Next** when the Certificate Enrollment wizard opens
5. Select Active Directory Enrollment Policy
6. Choose the certificate template created for Network Unlock on the Domain controller and select **Enroll**. When prompted for more information, add the following attribute to the certificate:
1. On the WDS server, open Certificate Manager by using `certmgr.msc`.
2. Under **Certificates - Current User**, right-click **Personal**.
3. Select **All Tasks** > **Request New Certificate**.
4. When the Certificate Enrollment wizard opens, select **Next**.
5. Select **Active Directory Enrollment Policy**.
6. Choose the certificate template that was created for Network Unlock on the domain controller. Then select **Enroll**.
1. When you're prompted for more information, select **Subject Name** and provide a friendly name value. Your friendly name should include information for the domain or organizational unit for the certificate. Here's an example: *BitLocker Network Unlock Certificate for Contoso domain*.
7. Create the certificate. Ensure the certificate appears in the **Personal** folder.
8. Export the public key certificate for Network Unlock:
- Select the **Subject Name** pane and provide a friendly name value. It is suggested that this friendly name include information for the domain or organizational unit for the certificate. For example "BitLocker Network Unlock Certificate for Contoso domain"
7. Create the certificate. Ensure the certificate appears in the Personal folder.
8. Export the public key certificate for Network Unlock
1. Create a .cer file by right-clicking the previously created certificate, choosing **All Tasks**, then **Export**.
1. Create a *.cer* file by right-clicking the previously created certificate and choosing **All Tasks** > **Export**.
2. Select **No, do not export the private key**.
3. Select **DER encoded binary X.509** and complete exporting the certificate to a file.
4. Give the file a name such as BitLocker-NetworkUnlock.cer.
9. Export the public key with a private key for Network Unlock
1. Create a .pfx file by right-clicking the previously created certificate, choosing **All Tasks**, then **Export**.
3. Select **DER encoded binary X.509**, and then finish exporting the certificate to a file.
4. Give the file a name, such as *BitLocker-NetworkUnlock.cer*.
9. Export the public key with a private key for Network Unlock:
1. Create a *.pfx* file by right-clicking the previously created certificate. Then choose **All Tasks** > **Export**.
2. Select **Yes, export the private key**.
3. Complete the wizard to create the .pfx file.
3. Complete the steps to create the *.pfx* file.
To create a self-signed certificate, you can either use the New-SelfSignedCertificate cmdlet in Windows PowerShell or use Certreq.
To create a self-signed certificate, either use the `New-SelfSignedCertificate` cmdlet in Windows PowerShell or use `certreq`.
Windows PowerShell example:
Here's a Windows PowerShell example:
```powershell
New-SelfSignedCertificate -CertStoreLocation Cert:\LocalMachine\My -Subject "CN=BitLocker Network Unlock certificate" -Provider "Microsoft Software Key Storage Provider" -KeyUsage KeyEncipherment -KeyUsageProperty Decrypt,Sign -KeyLength 2048 -HashAlgorithm sha512 -TextExtension @("1.3.6.1.4.1.311.21.10={text}OID=1.3.6.1.4.1.311.67.1.1","2.5.29.37={text}1.3.6.1.4.1.311.67.1.1")
```
Certreq example:
Here's a `certreq` example:
1. Create a text file with an .inf extension. For example, notepad.exe BitLocker-NetworkUnlock.inf.
1. Create a text file that has an *.inf* extension. For example, *notepad.exe* *BitLocker-NetworkUnlock.inf*.
2. Add the following contents to the previously created file:
```ini
@ -216,176 +206,183 @@ Certreq example:
_continue_ = "1.3.6.1.4.1.311.67.1.1"
```
3. Open an elevated command prompt and use the certreq tool to create a new certificate using the following command, specifying the full path to the file created previously, along with the file name:
3. Open an elevated command prompt and use the `certreq` tool to create a new certificate. Use the following command, specifying the full path to the file that you created previously. Also specify the file name.
```cmd
certreq -new BitLocker-NetworkUnlock.inf BitLocker-NetworkUnlock.cer
```
4. Verify the previous command properly created the certificate by confirming the .cer file exists.
5. Launch Certificates - Local Machine by running **certlm.msc**.
6. Create a .pfx file by opening the **Certificates – Local Computer\\Personal\\Certificates** path in the navigation pane, right-clicking the previously imported certificate, selecting **All Tasks**, then **Export**. Follow through the wizard to create the .pfx file.
4. Verify the previous command properly created the certificate by confirming the *.cer* file exists.
5. Launch **Certificates - Local Machine** by running `certlm.msc`.
6. Create a *.pfx* file by opening the *Certificates – Local Computer\\Personal\\Certificates* path in the navigation pane. Right-click the previously imported certificate, and then select **All Tasks** > **Export**. Follow through the steps to create the *.pfx* file.
### <a href="" id="bkmk-deploycert"><a/>Deploy the private key and certificate to the WDS server
### <a href="" id="bkmk-deploycert"></a>Deploy the private key and certificate to the WDS server
With the certificate and key created, deploy them to the infrastructure to properly unlock systems. To deploy the certificates, do the following:
Now that you've created the certificate and key, deploy them to the infrastructure to properly unlock systems. To deploy the certificates:
1. On the WDS server, open a new MMC and add the certificates snap-in. Select the computer account and local computer when given the options.
2. Right-click the Certificates (Local Computer) - BitLocker Drive Encryption Network Unlock item, choose All Tasks, then **Import**.
3. In the **File to Import** dialog, choose the .pfx file created previously.
4. Enter the password used to create the .pfx and complete the wizard.
1. On the WDS server, open a new Microsoft Management Console (MMC), and then add the certificates snap-in. When you're prompted, select the computer account and local computer.
2. Right-click **Certificates (Local Computer) - BitLocker Drive Encryption Network Unlock**, and then choose **All Tasks** > **Import**.
3. In the **File to Import** dialog box, choose the *.pfx* file that you created previously.
4. Enter the password that you used to create the *.pfx* file, and finish the steps.
### Configure Group Policy settings for Network Unlock
With certificate and key deployed to the WDS server for Network Unlock, the final step is to use Group Policy settings to deploy the public key certificate to computers that you want to be able to unlock using the Network Unlock key. Group Policy settings for BitLocker can be found under **\\Computer Configuration\\Administrative Templates\\Windows Components\\BitLocker Drive Encryption** using the Local Group Policy Editor or the Microsoft Management Console.
You've now deployed the certificate and key to the WDS server for Network Unlock. In the final step, you'll use Group Policy settings to deploy the public key certificate to computers that you want to be able to unlock by using the Network Unlock key. Find Group Policy settings for BitLocker in *\\Computer Configuration\\Administrative Templates\\Windows Components\\BitLocker Drive Encryption* by using the Local Group Policy Editor or the MMC.
The following steps describe how to enable the Group Policy setting that is a requirement for configuring Network Unlock.
To enable the Group Policy setting that's required to configure Network Unlock:
1. Open Group Policy Management Console (gpmc.msc).
2. Enable the policy **Require additional authentication at startup** and select the **Require startup PIN with TPM** or **Allow startup PIN with TPM** option.
1. Open Group Policy Management Console (`gpmc.msc`).
2. Enable the policy **Require additional authentication at startup**, and then select **Require startup PIN with TPM** or **Allow startup PIN with TPM**.
3. Turn on BitLocker with TPM+PIN protectors on all domain-joined computers.
The following steps describe how to deploy the required Group Policy setting:
To deploy the required Group Policy setting:
> [!NOTE]
> The Group Policy settings **Allow network unlock at startup** and **Add Network Unlock Certificate** were introduced in Windows Server 2012.
1. Copy the .cer file created for Network Unlock to the domain controller.
2. On the domain controller, launch Group Policy Management Console (gpmc.msc).
1. Copy the *.cer* file that you created for Network Unlock to the domain controller.
2. On the domain controller, open Group Policy Management Console (`gpmc.msc`).
3. Create a new Group Policy Object or modify an existing object to enable the **Allow network unlock at startup** setting.
4. Deploy the public certificate to clients:
1. Within Group Policy Management Console, navigate to the following location: **Computer Configuration\\Policies\\Windows Settings\\Security Settings\\Public Key Policies\\BitLocker Drive Encryption Network Unlock Certificate**.
2. Right-click the folder and choose **Add Network Unlock Certificate**.
3. Follow the wizard steps and import the .cer file that was copied earlier.
1. In Group Policy Management Console, go to *Computer Configuration\\Policies\\Windows Settings\\Security Settings\\Public Key Policies\\BitLocker Drive Encryption Network Unlock Certificate*.
2. Right-click the folder, and then choose **Add Network Unlock Certificate**.
3. Follow the steps and import the *.cer* file that you copied earlier.
> [!NOTE]
> Only one network unlock certificate can be available at a time. If a new certificate is required, delete the current certificate before deploying a new one. The Network Unlock certificate is located in the **HKEY\_LOCAL\_MACHINE\\Software\\Policies\\Microsoft\\SystemCertificates\\FVE\_NKP** key on the client computer.
> [!NOTE]
> Only one network unlock certificate can be available at a time. If you need a new certificate, delete the current certificate before you deploy a new one. The Network Unlock certificate is located in the *HKEY\_LOCAL\_MACHINE\\Software\\Policies\\Microsoft\\SystemCertificates\\FVE\_NKP* key on the client computer.
5. Reboot the clients after deploying the group policy.
5. Reboot the clients after you deploy the Group Policy.
> [!NOTE]
> The **Network (Certificate Based)** protector will be added only after a reboot with the policy enabled and a valid certificate present in the FVE_NKP store.
> The **Network (Certificate Based)** protector is added only after a reboot where the policy is enabled and a valid certificate is present in the FVE_NKP store.
### Subnet policy configuration files on WDS Server (Optional)
### Subnet policy configuration files on the WDS server (optional)
By default, all clients with the correct Network Unlock Certificate and valid Network Unlock protectors that have wired access to a Network Unlock-enabled WDS server via DHCP are unlocked by the server. A subnet policy configuration file on the WDS server can be created to limit which subnet(s) Network Unlock clients can use to unlock.
By default, the server unlocks clients that have the correct Network Unlock certificate and valid Network Unlock protectors that have wired access to a Network Unlock-enabled WDS server via DHCP. You can create a subnet policy configuration file on the WDS server to limit the subnets that Network Unlock clients can use for unlocking.
The configuration file, called bde-network-unlock.ini, must be located in the same directory as the Network Unlock provider DLL (%windir%\System32\Nkpprov.dll) and it applies to both IPv6 and IPv4 DHCP implementations. If the subnet configuration policy becomes corrupted, the provider will fail and stop responding to requests.
The configuration file, called *bde-network-unlock.ini*, must be located in the same directory as the Network Unlock provider dynamic-link library (*%windir%\System32\Nkpprov.dll*). The configuration file applies to both IPv6 and IPv4 DHCP implementations. If the subnet configuration policy becomes corrupted, then the provider fails and stops responding to requests.
The subnet policy configuration file must use a “\[SUBNETS\]” section to identify the specific subnets. The named subnets may then be used to specify restrictions in certificate subsections. Subnets are defined as simple name-value pairs, in the common INI format, where each subnet has its own line, with the name on the left of the equals sign, and the subnet identified on the right of the equal sign as a Classless Inter-Domain Routing (CIDR) address or range. The key word “ENABLED” is disallowed for subnet names.
The subnet policy configuration file must use a `[SUBNETS]` section to identify the specific subnets. You can then use the named subnets to specify restrictions in certificate subsections.
Subnets are defined as simple name-value pairs, in the common INI format. In this format, each subnet has its own line. The name is on the left of the equals sign. The subnet on the right of the equals sign is a Classless Interdomain Routing (CIDR) address or range. The keyword `ENABLED` is disallowed for subnet names.
```ini
[SUBNETS]
SUBNET1=10.185.250.0/24 ; comment about this subrange could be here, after the semi-colon
SUBNET1=10.185.250.0/24 ; a comment about this subrange could be here, after the semicolon
SUBNET2=10.185.252.200/28
SUBNET3= 2001:4898:a:2::/64 ; an IPv6 subnet
SUBNET4=2001:4898:a:3::/64; in production, the admin would likely give more useful names, like BUILDING9-EXCEPT-RECEP.
```
Following the \[SUBNETS\] section, there can be sections for each Network Unlock certificate, identified by the certificate thumbprint formatted without any spaces, which define subnets clients can be unlocked from with that certificate.
Following the `[SUBNETS]` section are sections for each Network Unlock certificate. A certificate is identified by the certificate thumbprint, which is formatted without any spaces. These sections define subnet clients that you can unlock by using that certificate.
> [!NOTE]
> When specifying the certificate thumbprint, do not include any spaces. If spaces are included in the thumbprint the subnet configuration will fail because the thumbprint will not be recognized as valid.
> When you specify the certificate thumbprint, don't include spaces. Thumbprints that include spaces aren't recognized as valid. The spaces will cause the subnet configuration to fail.
Subnet restrictions are defined within each certificate section by denoting the allowed list of permitted subnets. If any subnet is listed in a certificate section, then only those subnets listed are permitted for that certificate. If no subnet is listed in a certificate section, then all subnets are permitted for that certificate. If a certificate does not have a section in the subnet policy configuration file, then no subnet restrictions are applied for unlocking with that certificate. This means for restrictions to apply to every certificate, there must be a certificate section for every Network Unlock certificate on the server, and an explicit allowed list set for each certificate section.
Subnet lists are created by putting the name of a subnet from the \[SUBNETS\] section on its own line below the certificate section header. Then, the server will only unlock clients with this certificate on the subnet(s) specified as in the list. For troubleshooting, a subnet can be quickly excluded without deleting it from the section by simply commenting it out with a prepended semi-colon.
Each certificate section defines subnet restrictions by denoting the allowed list of permitted subnets. If any subnets are listed in a certificate section, then only those subnets are permitted for that certificate. If no subnet is listed in a certificate section, then all subnets are permitted for that certificate. If a certificate has no section in the subnet policy configuration file, then no subnet unlocking restrictions are applied for that certificate.
So to apply restrictions to every certificate, you must add a certificate section for every Network Unlock certificate on the server. And you must add an explicit allow list set for each certificate section.
Create subnet lists by putting the name of a subnet from the `[SUBNETS]` section on its own line below the certificate section header. Then, the server will unlock clients that have this certificate only on the subnets that the list specifies.
To troubleshoot, you can quickly exclude a subnet without deleting it from the section. Just comment it out by using a prepended semicolon.
```ini
[2158a767e1c14e88e27a4c0aee111d2de2eafe60]
;Comments could be added here to indicate when the cert was issued, which Group Policy should get it, and so on.
;This list shows this cert is only allowed to unlock clients on SUBNET1 and SUBNET3 subnets. In this example, SUBNET2 is commented out.
;This list shows this cert is allowed to unlock clients only on the SUBNET1 and SUBNET3 subnets. In this example, SUBNET2 is commented out.
SUBNET1
;SUBNET2
SUBNET3
```
To disallow the use of a certificate altogether, its subnet list may contain the line “DISABLED".
To disallow the use of a certificate altogether, add a `DISABLED` line to its subnet list.
## <a href="" id="bkmk-turnoffnetworkunlock"><a/>Turning off Network Unlock
## <a href="" id="bkmk-turnoffnetworkunlock"></a>Turn off Network Unlock
To turn off the unlock server, the PXE provider can be unregistered from the WDS server or uninstalled altogether. However, to stop clients from creating Network Unlock protectors the **Allow Network Unlock at startup** Group Policy setting should be disabled. When this policy setting is updated to disabled on client computers any Network Unlock key protectors on the computer will be deleted. Alternatively, the BitLocker Network Unlock certificate policy can be deleted on the domain controller to accomplish the same task for an entire domain.
To turn off the unlock server, you can unregister the PXE provider from the WDS server or uninstall it altogether. However, to stop clients from creating Network Unlock protectors, you should disable the **Allow Network Unlock at startup** Group Policy setting. When you disable this policy setting on client computers, any Network Unlock key protectors on the computer are deleted. Alternatively, you can delete the BitLocker Network Unlock certificate policy on the domain controller to accomplish the same task for an entire domain.
> [!NOTE]
> Removing the FVE_NKP certificate store that contains the Network Unlock certificate and key on the WDS server will also effectively disable the server’s ability to respond to unlock requests for that certificate. However, this is seen as an error condition and is not a supported or recommended method for turning off the Network Unlock server.
> Removing the FVE_NKP certificate store that contains the Network Unlock certificate and key on the WDS server will also effectively disable the server's ability to respond to unlock requests for that certificate. However, this condition is seen as an error. It's not a supported or recommended method for turning off the Network Unlock server.
## <a href="" id="bkmk-updatecerts"><a/>Update Network Unlock certificates
## <a href="" id="bkmk-updatecerts"></a>Update Network Unlock certificates
To update the certificates used by Network Unlock, administrators need to import or generate the new certificate for the server and then update the Network Unlock certificate Group Policy setting on the domain controller.
To update the certificates that Network Unlock uses, administrators need to import or generate the new certificate for the server. Then they must update the Network Unlock certificate Group Policy setting on the domain controller.
> [!NOTE]
> Servers that do not receive the Group Policy Object (GPO) will require a PIN when booting. In such cases, the reason why the server did not receive the GPO to update the certificate needs to be investigated.
> Servers that don't receive the Group Policy Object (GPO) will require a PIN when they boot. In such cases, find out why the server didn't receive the GPO to update the certificate.
## <a href="" id="bkmk-troubleshoot"></a>Troubleshoot Network Unlock
Troubleshooting Network Unlock issues begins by verifying the environment. Many times, a small configuration issue will be the root cause of the failure. Items to verify include:
To troubleshoot Network Unlock problems, begin by verifying the environment. Often, a small configuration issue is the root cause of the failure. Verify these items:
- Verify client hardware is UEFI-based and is on firmware version is 2.3.1 and that the UEFI firmware is in native mode without a Compatibility Support Module (CSM) for BIOS mode enabled. Do this by checking that the firmware does not have an option enabled such as "Legacy mode" or "Compatibility mode" or that the firmware does not appear to be in a BIOS-like mode.
- All required roles and services are installed and started
- Public and private certificates have been published and are in the proper certificate containers. The presence of the Network Unlock certificate can be verified in the Microsoft Management Console (MMC.exe) on the WDS server with the certificate snap-ins for the local computer enabled. The client certificate can be verified by checking the registry key **HKEY\_LOCAL\_MACHINE\\Software\\Policies\\Microsoft\\SystemCertificates\\FVE\_NKP** on the client computer.
- Group policy for Network Unlock is enabled and linked to the appropriate domains.
- Verify group policy is reaching the clients properly. This can be done using the GPRESULT.exe or RSOP.msc utilities.
- Verify the clients were rebooted after applying the policy.
- Verify the **Network (Certificate Based)** protector is listed on the client. This can be done using either manage-bde or Windows PowerShell cmdlets. For example the following command will list the key protectors currently configured on the C: drive of the local computer:
- Client hardware is based on UEFI and uses firmware version 2.3.1, and the UEFI firmware is in native mode and has no compatibility support module (CSM) for BIOS mode enabled. Verify this configuration by ensuring that the firmware has no enabled option such as **Legacy mode** or **Compatibility mode** and that the firmware doesn't appear to be in a BIOS-like mode.
- All required roles and services are installed and started.
- Public and private certificates have been published and are in the proper certificate containers. Verify the presence of the Network Unlock certificate by using Microsoft Management Console (*MMC.exe*) on the WDS server. The certificate snap-ins for the local computer should be enabled. Verify the client certificate by checking the registry key *HKEY\_LOCAL\_MACHINE\\Software\\Policies\\Microsoft\\SystemCertificates\\FVE\_NKP* on the client computer.
- Group Policy for Network Unlock is enabled and linked to the appropriate domains.
- Group Policy is reaching the clients properly. Verify this functionality by using the *GPRESULT.exe* utility or the *RSOP.msc* utility.
- The clients were rebooted after the policy was applied.
- The **Network (Certificate Based)** protector is listed on the client. Check for this protector by using either `manage-bde` or Windows PowerShell cmdlets. For example, the following command lists the key protectors that are currently configured on drive C on the local computer.
```powershell
manage-bde -protectors -get C:
```
> [!NOTE]
> Use the output of manage-bde along with the WDS debug log to determine if the proper certificate thumbprint is being used for Network Unlock
> Use the output of `manage-bde` along with the WDS debug log to determine whether the proper certificate thumbprint is being used for Network Unlock.
Files to gather when troubleshooting BitLocker Network Unlock include:
Gather the following files to troubleshoot BitLocker Network Unlock.
1. The Windows event logs. Specifically the BitLocker event logs and the Microsoft-Windows-Deployment-Services-Diagnostics-Debug log
- The Windows event logs. Specifically, get the BitLocker event logs and the Microsoft-Windows-Deployment-Services-Diagnostics-Debug log.
Debug logging is turned off by default for the WDS server role, so you will need to enable it first. You can use either of the following two methods to turn on WDS debug logging.
Debug logging is turned off by default for the WDS server role, so you need to enable it before you can retrieve it. Use either of the following two methods to turn on WDS debug logging.
1. Start an elevated command prompt and run the following command:
- Start an elevated command prompt, and then run the following command:
```cmd
wevtutil sl Microsoft-Windows-Deployment-Services-Diagnostics/Debug /e:true
```
2. Open Event Viewer on the WDS server.
- Open Event Viewer on the WDS server:
In the left pane, click **Applications and Services Logs**, click **Microsoft**, click **Windows**, click **Deployment-Services-Diagnostics**, and then click **Debug**.
1. In the left pane, select **Applications and Services Logs** > **Microsoft** > **Windows** > **Deployment-Services-Diagnostics** > **Debug**.
1. In the right pane, select **Enable Log**.
In the right pane, click **Enable Log**.
2. The DHCP subnet configuration file (if one exists).
3. The output of the BitLocker status on the volume, this can be gathered into a text file using **manage-bde -status** or **Get-BitLockerVolume** in Windows PowerShell.
4. Network Monitor capture on the server hosting the WDS role, filtered by client IP address.
- The DHCP subnet configuration file (if one exists).
- The output of the BitLocker status on the volume. Gather this output into a text file by using `manage-bde -status`. Or in Windows PowerShell, use `Get-BitLockerVolume`.
- The Network Monitor capture on the server that hosts the WDS role, filtered by client IP address.
## <a href="" id="bkmk-unsupportedsystems"></a>Configure Network Unlock Group Policy settings on earlier versions
Network Unlock and the accompanying Group Policy settings were introduced in Windows Server 2012 but can be deployed using operating systems running Windows Server 2008 R2 and Windows Server 2008.
Network Unlock and the accompanying Group Policy settings were introduced in Windows Server 2012. But you can deploy them by using operating systems that run Windows Server 2008 R2 and Windows Server 2008.
**Requirements**
Your system must meet these requirements:
- The server hosting WDS must be running any of the server operating systems designated in the **Applies To** list at the beginning of this topic.
- Client computers must be running any of the client operating systems designated in the **Applies To** list at the beginning of this topic.
- The server that hosts WDS must be running a server operating system that's designated in the "Applies to" list at the beginning of this article.
- Client computers must be running a client operating system that's designated in the "Applies to" list at the beginning of this article.
The following steps can be used to configure Network Unlock on these older systems.
Follow these steps to configure Network Unlock on these older systems.
1. [Install the WDS Server role](#bkmk-installwdsrole)
2. [Confirm the WDS Service is running](#bkmk-confirmwdsrunning)
3. [Install the Network Unlock feature](#bkmk-installnufeature)
4. [Create the Network Unlock certificate](#bkmk-createcert)
5. [Deploy the private key and certificate to the WDS server](#bkmk-deploycert)
1. [Install the WDS server role.](#bkmk-installwdsrole)
2. [Confirm the WDS service is running.](#bkmk-confirmwdsrunning)
3. [Install the Network Unlock feature.](#bkmk-installnufeature)
4. [Create the Network Unlock certificate.](#bkmk-createcert)
5. [Deploy the private key and certificate to the WDS server.](#bkmk-deploycert)
6. Configure registry settings for Network Unlock:
Apply the registry settings by running the following certutil script (assuming your network unlock certificate file is called **BitLocker-NetworkUnlock.cer**) on each computer running any of the client operating systems designated in the **Applies To** list at the beginning of this topic.
```console
certutil -f -grouppolicy -addstore FVE_NKP BitLocker-NetworkUnlock.cer
reg add "HKLM\SOFTWARE\Policies\Microsoft\FVE" /v OSManageNKP /t REG_DWORD /d 1 /f
reg add "HKLM\SOFTWARE\Policies\Microsoft\FVE" /v UseAdvancedStartup /t REG_DWORD /d 1 /f
reg add "HKLM\SOFTWARE\Policies\Microsoft\FVE" /v UsePIN /t REG_DWORD /d 2 /f
reg add "HKLM\SOFTWARE\Policies\Microsoft\FVE" /v UseTPMPIN /t REG_DWORD /d 2 /f
reg add "HKLM\SOFTWARE\Policies\Microsoft\FVE" /v UseTPM /t REG_DWORD /d 2 /f
reg add "HKLM\SOFTWARE\Policies\Microsoft\FVE" /v UseTPMKey /t REG_DWORD /d 2 /f
reg add "HKLM\SOFTWARE\Policies\Microsoft\FVE" /v UseTPMKeyPIN /t REG_DWORD /d 2 /f
```
Apply the registry settings by running the following `certutil` script (assuming your Network Unlock certificate file is called *BitLocker-NetworkUnlock.cer*) on each computer that runs a client operating system that's designated in the "Applies to" list at the beginning of this article.
7. Set up a TPM protector on the clients
8. Reboot the clients to add the Network (Certificate Based) protector
```console
certutil -f -grouppolicy -addstore FVE_NKP BitLocker-NetworkUnlock.cer
reg add "HKLM\SOFTWARE\Policies\Microsoft\FVE" /v OSManageNKP /t REG_DWORD /d 1 /f
reg add "HKLM\SOFTWARE\Policies\Microsoft\FVE" /v UseAdvancedStartup /t REG_DWORD /d 1 /f
reg add "HKLM\SOFTWARE\Policies\Microsoft\FVE" /v UsePIN /t REG_DWORD /d 2 /f
reg add "HKLM\SOFTWARE\Policies\Microsoft\FVE" /v UseTPMPIN /t REG_DWORD /d 2 /f
reg add "HKLM\SOFTWARE\Policies\Microsoft\FVE" /v UseTPM /t REG_DWORD /d 2 /f
reg add "HKLM\SOFTWARE\Policies\Microsoft\FVE" /v UseTPMKey /t REG_DWORD /d 2 /f
reg add "HKLM\SOFTWARE\Policies\Microsoft\FVE" /v UseTPMKeyPIN /t REG_DWORD /d 2 /f
```
7. Set up a TPM protector on the clients.
8. Reboot the clients to add the **Network (Certificate Based)** protector.
## See also

82
windows/security/information-protection/bitlocker/bitlocker-overview-and-requirements-faq.md
View File

@ -1,82 +0,0 @@
---
title: BitLocker overview and requirements FAQ (Windows 10)
description: This topic for the IT professional answers frequently asked questions concerning the requirements to use BitLocker.
ms.assetid: c40f87ac-17d3-47b2-afc6-6c641f72ecee
ms.reviewer:
ms.prod: w10
ms.mktglfcycl: explore
ms.sitesec: library
ms.pagetype: security
ms.localizationpriority: medium
author: dansimp
ms.author: dansimp
manager: dansimp
audience: ITPro
ms.collection: M365-security-compliance
ms.topic: conceptual
ms.date: 02/28/2019
ms.custom: bitlocker
---
# BitLocker Overview and Requirements FAQ
**Applies to**
- Windows 10
## How does BitLocker work?
**How BitLocker works with operating system drives**
You can use BitLocker to mitigate unauthorized data access on lost or stolen computers by encrypting all user files and system files on the operating system drive, including the swap files and hibernation files, and checking the integrity of early boot components and boot configuration data.
**How BitLocker works with fixed and removable data drives**
You can use BitLocker to encrypt the entire contents of a data drive. You can use Group Policy to require that BitLocker be enabled on a drive before the computer can write data to the drive. BitLocker can be configured with a variety of unlock methods for data drives, and a data drive supports multiple unlock methods.
## Does BitLocker support multifactor authentication?
Yes, BitLocker supports multifactor authentication for operating system drives. If you enable BitLocker on a computer that has a TPM version 1.2 or later, you can use additional forms of authentication with the TPM protection.
## What are the BitLocker hardware and software requirements?
For requirements, see [System requirements](bitlocker-overview.md#system-requirements).
> [!NOTE]
> Dynamic disks are not supported by BitLocker. Dynamic data volumes will not be displayed in the Control Panel. Although the operating system volume will always be displayed in the Control Panel, regardless of whether it is a Dynamic disk, if it is a dynamic disk it cannot be protected by BitLocker.
## Why are two partitions required? Why does the system drive have to be so large?
Two partitions are required to run BitLocker because pre-startup authentication and system integrity verification must occur on a separate partition from the encrypted operating system drive. This configuration helps protect the operating system and the information in the encrypted drive.
## Which Trusted Platform Modules (TPMs) does BitLocker support?
BitLocker supports TPM version 1.2 or higher. BitLocker support for TPM 2.0 requires Unified Extensible Firmware Interface (UEFI) for the device.
> [!NOTE]
> TPM 2.0 is not supported in Legacy and CSM Modes of the BIOS. Devices with TPM 2.0 must have their BIOS mode configured as Native UEFI only. The Legacy and Compatibility Support Module (CSM) options must be disabled. For added security Enable the Secure Boot feature.
> Installed Operating System on hardware in legacy mode will stop the OS from booting when the BIOS mode is changed to UEFI. Use the tool [MBR2GPT](https://docs.microsoft.com/windows/deployment/mbr-to-gpt) before changing the BIOS mode which will prepare the OS and the disk to support UEFI.
## How can I tell if a TPM is on my computer?
Beginning with Windows 10, version 1803, you can check TPM status in **Windows Defender Security Center** > **Device Security** > **Security processor details**. In previous versions of Windows, open the TPM MMC console (tpm.msc) and look under the **Status** heading.
## Can I use BitLocker on an operating system drive without a TPM?
Yes, you can enable BitLocker on an operating system drive without a TPM version 1.2 or higher, if the BIOS or UEFI firmware has the ability to read from a USB flash drive in the boot environment. This is because BitLocker will not unlock the protected drive until BitLocker's own volume master key is first released by either the computer's TPM or by a USB flash drive containing the BitLocker startup key for that computer. However, computers without TPMs will not be able to use the system integrity verification that BitLocker can also provide.
To help determine whether a computer can read from a USB device during the boot process, use the BitLocker system check as part of the BitLocker setup process. This system check performs tests to confirm that the computer can properly read from the USB devices at the appropriate time and that the computer meets other BitLocker requirements.
## How do I obtain BIOS support for the TPM on my computer?
Contact the computer manufacturer to request a Trusted Computing Group (TCG)-compliant BIOS or UEFI boot firmware that meets the following requirements:
- It is compliant with the TCG standards for a client computer.
- It has a secure update mechanism to help prevent a malicious BIOS or boot firmware from being installed on the computer.
## What credentials are required to use BitLocker?
To turn on, turn off, or change configurations of BitLocker on operating system and fixed data drives, membership in the local **Administrators** group is required. Standard users can turn on, turn off, or change configurations of BitLocker on removable data drives.
## What is the recommended boot order for computers that are going to be BitLocker-protected?
You should configure the startup options of your computer to have the hard disk drive first in the boot order, before any other drives such as CD/DVD drives or USB drives. If the hard disk is not first and you typically boot from hard disk, then a boot order change may be detected or assumed when removable media is found during boot. The boot order typically affects the system measurement that is verified by BitLocker and a change in boot order will cause you to be prompted for your BitLocker recovery key. For the same reason, if you have a laptop with a docking station, ensure that the hard disk drive is first in the boot order both when docked and undocked. 

82
windows/security/information-protection/bitlocker/bitlocker-overview-and-requirements-faq.yml Normal file
View File

@ -0,0 +1,82 @@
### YamlMime:FAQ
metadata:
title: BitLocker overview and requirements FAQ (Windows 10)
description: This topic for the IT professional answers frequently asked questions concerning the requirements to use BitLocker.
ms.assetid: c40f87ac-17d3-47b2-afc6-6c641f72ecee
ms.reviewer:
ms.prod: w10
ms.mktglfcycl: explore
ms.sitesec: library
ms.pagetype: security
ms.localizationpriority: medium
author: dansimp
ms.author: dansimp
manager: dansimp
audience: ITPro
ms.collection: M365-security-compliance
ms.topic: conceptual
ms.date: 02/28/2019
ms.custom: bitlocker
title: BitLocker Overview and Requirements FAQ
summary: |
**Applies to**
- Windows 10
sections:
- name: Ignored
questions:
- question: How does BitLocker work?
answer: |
**How BitLocker works with operating system drives**
You can use BitLocker to mitigate unauthorized data access on lost or stolen computers by encrypting all user files and system files on the operating system drive, including the swap files and hibernation files, and checking the integrity of early boot components and boot configuration data.
**How BitLocker works with fixed and removable data drives**
You can use BitLocker to encrypt the entire contents of a data drive. You can use Group Policy to require that BitLocker be enabled on a drive before the computer can write data to the drive. BitLocker can be configured with a variety of unlock methods for data drives, and a data drive supports multiple unlock methods.
- question: Does BitLocker support multifactor authentication?
answer: Yes, BitLocker supports multifactor authentication for operating system drives. If you enable BitLocker on a computer that has a TPM version 1.2 or later, you can use additional forms of authentication with the TPM protection.
- question: What are the BitLocker hardware and software requirements?
answer: |
For requirements, see [System requirements](bitlocker-overview.md#system-requirements).
> [!NOTE]
> Dynamic disks are not supported by BitLocker. Dynamic data volumes will not be displayed in the Control Panel. Although the operating system volume will always be displayed in the Control Panel, regardless of whether it is a Dynamic disk, if it is a dynamic disk it cannot be protected by BitLocker.
- question: Why are two partitions required? Why does the system drive have to be so large?
answer: Two partitions are required to run BitLocker because pre-startup authentication and system integrity verification must occur on a separate partition from the encrypted operating system drive. This configuration helps protect the operating system and the information in the encrypted drive.
- question: Which Trusted Platform Modules (TPMs) does BitLocker support?
answer: |
BitLocker supports TPM version 1.2 or higher. BitLocker support for TPM 2.0 requires Unified Extensible Firmware Interface (UEFI) for the device.
> [!NOTE]
> TPM 2.0 is not supported in Legacy and CSM Modes of the BIOS. Devices with TPM 2.0 must have their BIOS mode configured as Native UEFI only. The Legacy and Compatibility Support Module (CSM) options must be disabled. For added security Enable the Secure Boot feature.
>
> Installed Operating System on hardware in legacy mode will stop the OS from booting when the BIOS mode is changed to UEFI. Use the tool [MBR2GPT](https://docs.microsoft.com/windows/deployment/mbr-to-gpt) before changing the BIOS mode which will prepare the OS and the disk to support UEFI.
- question: How can I tell if a TPM is on my computer?
answer: Beginning with Windows 10, version 1803, you can check TPM status in **Windows Defender Security Center** > **Device Security** > **Security processor details**. In previous versions of Windows, open the TPM MMC console (tpm.msc) and look under the **Status** heading.
- question: Can I use BitLocker on an operating system drive without a TPM?
answer: |
Yes, you can enable BitLocker on an operating system drive without a TPM version 1.2 or higher, if the BIOS or UEFI firmware has the ability to read from a USB flash drive in the boot environment. This is because BitLocker will not unlock the protected drive until BitLocker's own volume master key is first released by either the computer's TPM or by a USB flash drive containing the BitLocker startup key for that computer. However, computers without TPMs will not be able to use the system integrity verification that BitLocker can also provide.
To help determine whether a computer can read from a USB device during the boot process, use the BitLocker system check as part of the BitLocker setup process. This system check performs tests to confirm that the computer can properly read from the USB devices at the appropriate time and that the computer meets other BitLocker requirements.
- question: How do I obtain BIOS support for the TPM on my computer?
answer: |
Contact the computer manufacturer to request a Trusted Computing Group (TCG)-compliant BIOS or UEFI boot firmware that meets the following requirements:
- It is compliant with the TCG standards for a client computer.
- It has a secure update mechanism to help prevent a malicious BIOS or boot firmware from being installed on the computer.
- question: What credentials are required to use BitLocker?
answer: To turn on, turn off, or change configurations of BitLocker on operating system and fixed data drives, membership in the local **Administrators** group is required. Standard users can turn on, turn off, or change configurations of BitLocker on removable data drives.
- question: What is the recommended boot order for computers that are going to be BitLocker-protected?
answer: You should configure the startup options of your computer to have the hard disk drive first in the boot order, before any other drives such as CD/DVD drives or USB drives. If the hard disk is not first and you typically boot from hard disk, then a boot order change may be detected or assumed when removable media is found during boot. The boot order typically affects the system measurement that is verified by BitLocker and a change in boot order will cause you to be prompted for your BitLocker recovery key. For the same reason, if you have a laptop with a docking station, ensure that the hard disk drive is first in the boot order both when docked and undocked. 

6
windows/security/information-protection/bitlocker/bitlocker-overview.md
View File

@ -62,7 +62,7 @@ A computer with a TPM must also have a Trusted Computing Group (TCG)-compliant B
The system BIOS or UEFI firmware (for TPM and non-TPM computers) must support the USB mass storage device class, including reading small files on a USB flash drive in the pre-operating system environment.
> [!IMPORTANT]
> From Windows 7, you can encrypt an OS drive without a TPM and USB flash drive. For this procedure, see [Tip of the Day: Bitlocker without TPM or USB](https://blogs.technet.microsoft.com/tip_of_the_day/2014/01/22/tip-of-the-day-bitlocker-without-tpm-or-usb/).
> From Windows 7, you can encrypt an OS drive without a TPM and USB flash drive. For this procedure, see [Tip of the Day: Bitlocker without TPM or USB](https://social.technet.microsoft.com/Forums/en-US/eac2cc67-8442-42db-abad-2ed173879751/bitlocker-without-tpm?forum=win10itprosetup).
> [!NOTE]
> TPM 2.0 is not supported in Legacy and CSM Modes of the BIOS. Devices with TPM 2.0 must have their BIOS mode configured as Native UEFI only. The Legacy and Compatibility Support Module (CSM) options must be disabled. For added security Enable the Secure Boot feature.
@ -74,6 +74,8 @@ The hard disk must be partitioned with at least two drives:
- The operating system drive (or boot drive) contains the operating system and its support files. It must be formatted with the NTFS file system.
- The system drive contains the files that are needed to load Windows after the firmware has prepared the system hardware. BitLocker is not enabled on this drive. For BitLocker to work, the system drive must not be encrypted, must differ from the operating system drive, and must be formatted with the FAT32 file system on computers that use UEFI-based firmware or with the NTFS file system on computers that use BIOS firmware. We recommend that system drive be approximately 350 MB in size. After BitLocker is turned on it should have approximately 250 MB of free space.
A partition subject to encryption cannot be marked as an active partition (this applies to the operating system, fixed data, and removable data drives).
When installed on a new computer, Windows will automatically create the partitions that are required for BitLocker.
When installing the BitLocker optional component on a server you will also need to install the Enhanced Storage feature, which is used to support hardware encrypted drives.
@ -97,5 +99,3 @@ When installing the BitLocker optional component on a server you will also need
| [Troubleshoot BitLocker](troubleshoot-bitlocker.md) | This guide describes the resources that can help you troubleshoot BitLocker issues, and provides solutions for several common BitLocker issues. |
| [Protecting cluster shared volumes and storage area networks with BitLocker](protecting-cluster-shared-volumes-and-storage-area-networks-with-bitlocker.md)| This topic for IT pros describes how to protect CSVs and SANs with BitLocker.|
| [Enabling Secure Boot and BitLocker Device Encryption on Windows 10 IoT Core](https://developer.microsoft.com/windows/iot/docs/securebootandbitlocker) | This topic covers how to use BitLocker with Windows 10 IoT Core |

272
windows/security/information-protection/bitlocker/bitlocker-recovery-guide-plan.md
View File

@ -1,8 +1,8 @@
---
title: BitLocker recovery guide (Windows 10)
description: This topic for IT professionals describes how to recover BitLocker keys from AD DS.
description: This article for IT professionals describes how to recover BitLocker keys from AD DS.
ms.assetid: d0f722e9-1773-40bf-8456-63ee7a95ea14
ms.reviewer:
ms.reviewer:
ms.prod: w10
ms.mktglfcycl: explore
ms.sitesec: library
@ -20,11 +20,11 @@ ms.custom: bitlocker
# BitLocker recovery guide
**Applies to**
**Applies to:**
- Windows 10
- Windows 10
This topic for IT professionals describes how to recover BitLocker keys from AD DS.
This article for IT professionals describes how to recover BitLocker keys from AD DS.
Organizations can use BitLocker recovery information saved in Active Directory Domain Services (AD DS) to access BitLocker-protected data. Creating a recovery model for BitLocker while you are planning your BitLocker deployment is recommended.
@ -32,56 +32,58 @@ This article assumes that you understand how to set up AD DS to back up BitLock
This article does not detail how to configure AD DS to store the BitLocker recovery information.
## <a href="" id="bkmk-whatisrecovery"></a>What is BitLocker recovery?
BitLocker recovery is the process by which you can restore access to a BitLocker-protected drive in the event that you cannot unlock the drive normally. In a recovery scenario, you have the following options to restore access to the drive:
- The user can supply the recovery password. If your organization allows users to print or store recovery passwords, the user can type in the 48-digit recovery password that they printed or stored on a USB drive or with your Microsoft Account online. (Saving a recovery password with your Microsoft Account online is only allowed when BitLocker is used on a PC that is not a member of a domain).
- A data recovery agent can use their credentials to unlock the drive. If the drive is an operating system drive, the drive must be mounted as a data drive on another computer for the data recovery agent to unlock it.
- A domain administrator can obtain the recovery password from AD DS and use it to unlock the drive. Storing recovery passwords in AD DS is recommended to provide a way for IT professionals to be able to obtain recovery passwords for drives in their organization if needed. This method requires that you have enabled this recovery method in the BitLocker Group Policy setting **Choose how BitLocker-protected operating system drives can be recovered** located at **Computer Configuration\\Administrative Templates\\Windows Components\\BitLocker Drive Encryption\\Operating System Drives** in the Local Group Policy Editor. For more information, see [BitLocker Group Policy settings](bitlocker-group-policy-settings.md).
- The user can supply the recovery password. If your organization allows users to print or store recovery passwords, the user can type in the 48-digit recovery password that they printed or stored on a USB drive or with your Microsoft Account online. (Saving a recovery password with your Microsoft Account online is only allowed when BitLocker is used on a PC that is not a member of a domain).
- A data recovery agent can use their credentials to unlock the drive. If the drive is an operating system drive, the drive must be mounted as a data drive on another computer for the data recovery agent to unlock it.
- A domain administrator can obtain the recovery password from AD DS and use it to unlock the drive. Storing recovery passwords in AD DS is recommended to provide a way for IT professionals to be able to obtain recovery passwords for drives in their organization if needed. This method requires that you have enabled this recovery method in the BitLocker Group Policy setting **Choose how BitLocker-protected operating system drives can be recovered** located at **Computer Configuration\\Administrative Templates\\Windows Components\\BitLocker Drive Encryption\\Operating System Drives** in the Local Group Policy Editor. For more information, see [BitLocker Group Policy settings](bitlocker-group-policy-settings.md).
### What causes BitLocker recovery?
The following list provides examples of specific events that will cause BitLocker to enter recovery mode when attempting to start the operating system drive:
- On PCs that use BitLocker Drive Encryption, or on devices such as tablets or phones that use [BitLocker Device Encryption](bitlocker-device-encryption-overview-windows-10.md) only, when an attack is detected, the device will immediately reboot and enter into BitLocker recovery mode. To take advantage of this functionality Administrators can set the **Interactive logon: Machine account lockout threshold** Group Policy setting located in **\\Computer Configuration\\Windows Settings\\Security Settings\\Local Policies\\Security Options** in the Local Group Policy Editor, or use the **MaxFailedPasswordAttempts** policy of [Exchange ActiveSync](/Exchange/clients/exchange-activesync/exchange-activesync) (also configurable through [Microsoft Intune](https://www.microsoft.com/microsoft-365/enterprise-mobility-security/microsoft-intune)), to limit the number of failed password attempts before the device goes into Device Lockout.
- On devices with TPM 1.2, changing the BIOS or firmware boot device order causes BitLocker recovery. However, devices with TPM 2.0 do not start BitLocker recovery in this case. TPM 2.0 does not consider a firmware change of boot device order as a security threat because the OS Boot Loader is not compromised.
- Having the CD or DVD drive before the hard drive in the BIOS boot order and then inserting or removing a CD or DVD.
- Failing to boot from a network drive before booting from the hard drive.
- Docking or undocking a portable computer. In some instances (depending on the computer manufacturer and the BIOS), the docking condition of the portable computer is part of the system measurement and must be consistent to validate the system status and unlock BitLocker. This means that if a portable computer is connected to its docking station when BitLocker is turned on, then it might also need to be connected to the docking station when it is unlocked. Conversely, if a portable computer is not connected to its docking station when BitLocker is turned on, then it might need to be disconnected from the docking station when it is unlocked.
- Changes to the NTFS partition table on the disk including creating, deleting, or resizing a primary partition.
- Entering the personal identification number (PIN) incorrectly too many times so that the anti-hammering logic of the TPM is activated. Anti-hammering logic is software or hardware methods that increase the difficulty and cost of a brute force attack on a PIN by not accepting PIN entries until after a certain amount of time has passed.
- Turning off the support for reading the USB device in the pre-boot environment from the BIOS or UEFI firmware if you are using USB-based keys instead of a TPM.
- Turning off, disabling, deactivating, or clearing the TPM.
- Upgrading critical early startup components, such as a BIOS or UEFI firmware upgrade, causing the related boot measurements to change.
- Forgetting the PIN when PIN authentication has been enabled.
- Updating option ROM firmware.
- Upgrading TPM firmware.
- Adding or removing hardware; for example, inserting a new card in the computer, including some PCMIA wireless cards.
- Removing, inserting, or completely depleting the charge on a smart battery on a portable computer.
- Changes to the master boot record on the disk.
- Changes to the boot manager on the disk.
- Hiding the TPM from the operating system. Some BIOS or UEFI settings can be used to prevent the enumeration of the TPM to the operating system. When implemented, this option can make the TPM hidden from the operating system. When the TPM is hidden, BIOS and UEFI secure startup are disabled, and the TPM does not respond to commands from any software.
- Using a different keyboard that does not correctly enter the PIN or whose keyboard map does not match the keyboard map assumed by the pre-boot environment. This can prevent the entry of enhanced PINs.
- Modifying the Platform Configuration Registers (PCRs) used by the TPM validation profile. For example, including **PCR\[1\]** would result in BitLocker measuring most changes to BIOS settings, causing BitLocker to enter recovery mode even when non-boot critical BIOS settings change.
- On PCs that use BitLocker Drive Encryption, or on devices such as tablets or phones that use [BitLocker Device Encryption](bitlocker-device-encryption-overview-windows-10.md) only, when an attack is detected, the device will immediately reboot and enter into BitLocker recovery mode. To take advantage of this functionality, administrators can set the **Interactive logon: Machine account lockout threshold** Group Policy setting located in **\\Computer Configuration\\Windows Settings\\Security Settings\\Local Policies\\Security Options** in the Local Group Policy Editor. Or they can use the **MaxFailedPasswordAttempts** policy of [Exchange ActiveSync](/Exchange/clients/exchange-activesync/exchange-activesync) (also configurable through [Microsoft Intune](https://www.microsoft.com/microsoft-365/enterprise-mobility-security/microsoft-intune)), to limit the number of failed password attempts before the device goes into Device Lockout.
- On devices with TPM 1.2, changing the BIOS or firmware boot device order causes BitLocker recovery. However, devices with TPM 2.0 do not start BitLocker recovery in this case. TPM 2.0 does not consider a firmware change of boot device order as a security threat because the OS Boot Loader is not compromised.
- Having the CD or DVD drive before the hard drive in the BIOS boot order and then inserting or removing a CD or DVD.
- Failing to boot from a network drive before booting from the hard drive.
- Docking or undocking a portable computer. In some instances (depending on the computer manufacturer and the BIOS), the docking condition of the portable computer is part of the system measurement and must be consistent to validate the system status and unlock BitLocker. So if a portable computer is connected to its docking station when BitLocker is turned on, then it might also need to be connected to the docking station when it is unlocked. Conversely, if a portable computer is not connected to its docking station when BitLocker is turned on, then it might need to be disconnected from the docking station when it is unlocked.
- Changes to the NTFS partition table on the disk including creating, deleting, or resizing a primary partition.
- Entering the personal identification number (PIN) incorrectly too many times so that the anti-hammering logic of the TPM is activated. Anti-hammering logic is software or hardware methods that increase the difficulty and cost of a brute force attack on a PIN by not accepting PIN entries until after a certain amount of time has passed.
- Turning off the support for reading the USB device in the pre-boot environment from the BIOS or UEFI firmware if you are using USB-based keys instead of a TPM.
- Turning off, disabling, deactivating, or clearing the TPM.
- Upgrading critical early startup components, such as a BIOS or UEFI firmware upgrade, causing the related boot measurements to change.
- Forgetting the PIN when PIN authentication has been enabled.
- Updating option ROM firmware.
- Upgrading TPM firmware.
- Adding or removing hardware; for example, inserting a new card in the computer, including some PCMIA wireless cards.
- Removing, inserting, or completely depleting the charge on a smart battery on a portable computer.
- Changes to the master boot record on the disk.
- Changes to the boot manager on the disk.
- Hiding the TPM from the operating system. Some BIOS or UEFI settings can be used to prevent the enumeration of the TPM to the operating system. When implemented, this option can make the TPM hidden from the operating system. When the TPM is hidden, BIOS and UEFI secure startup are disabled, and the TPM does not respond to commands from any software.
- Using a different keyboard that does not correctly enter the PIN or whose keyboard map does not match the keyboard map assumed by the pre-boot environment. This problem can prevent the entry of enhanced PINs.
- Modifying the Platform Configuration Registers (PCRs) used by the TPM validation profile. For example, including **PCR\[1\]** would result in BitLocker measuring most changes to BIOS settings, causing BitLocker to enter recovery mode even when non-boot critical BIOS settings change.
> [!NOTE]
> Some computers have BIOS settings that skip measurements to certain PCRs, such as **PCR\[2\]**. Changing this setting in the BIOS would cause BitLocker to enter recovery mode because the PCR measurement will be different.
- Moving the BitLocker-protected drive into a new computer.
- Upgrading the motherboard to a new one with a new TPM.
- Losing the USB flash drive containing the startup key when startup key authentication has been enabled.
- Failing the TPM self-test.
- Having a BIOS, UEFI firmware, or an option ROM component that is not compliant with the relevant Trusted Computing Group standards for a client computer. For example, a non-compliant implementation may record volatile data (such as time) in the TPM measurements, causing different measurements on each startup and causing BitLocker to start in recovery mode.
- Changing the usage authorization for the storage root key of the TPM to a non-zero value.
- Moving the BitLocker-protected drive into a new computer.
- Upgrading the motherboard to a new one with a new TPM.
- Losing the USB flash drive containing the startup key when startup key authentication has been enabled.
- Failing the TPM self-test.
- Having a BIOS, UEFI firmware, or an option ROM component that is not compliant with the relevant Trusted Computing Group standards for a client computer. For example, a non-compliant implementation may record volatile data (such as time) in the TPM measurements, causing different measurements on each startup and causing BitLocker to start in recovery mode.
- Changing the usage authorization for the storage root key of the TPM to a non-zero value.
> [!NOTE]
> The BitLocker TPM initialization process sets the usage authorization value to zero, so another user or process must explicitly have changed this value.
- Disabling the code integrity check or enabling test signing on Windows Boot Manager (Bootmgr).
- Pressing the F8 or F10 key during the boot process.
- Adding or removing add-in cards (such as video or network cards), or upgrading firmware on add-in cards.
- Using a BIOS hot key during the boot process to change the boot order to something other than the hard drive.
- Disabling the code integrity check or enabling test signing on Windows Boot Manager (Bootmgr).
- Pressing the F8 or F10 key during the boot process.
- Adding or removing add-in cards (such as video or network cards), or upgrading firmware on add-in cards.
- Using a BIOS hot key during the boot process to change the boot order to something other than the hard drive.
> [!NOTE]
> Before you begin recovery, we recommend that you determine what caused recovery. This might help prevent the problem from occurring again in the future. For instance, if you determine that an attacker has modified your computer by obtaining physical access, you can create new security policies for tracking who has physical presence. After the recovery password has been used to recover access to the PC, BitLocker will reseal the encryption key to the current values of the measured components.
@ -91,60 +93,65 @@ For planned scenarios, such as a known hardware or firmware upgrades, you can av
> [!NOTE]
> If suspended BitLocker will automatically resume protection when the PC is rebooted, unless a reboot count is specified using the manage-bde command line tool.
If software maintenance requires the computer be restarted and you are using two-factor authentication, you can enable BitLocker Network Unlock to provide the secondary authentication factor when the computers do not have an on-premises user to provide the additional authentication method.
If software maintenance requires the computer to be restarted and you are using two-factor authentication, you can enable BitLocker Network Unlock to provide the secondary authentication factor when the computers do not have an on-premises user to provide the additional authentication method.
Recovery has been described within the context of unplanned or undesired behavior, but you can also cause recovery as an intended production scenario, in order to manage access control. For example, when you redeploy desktop or laptop computers to other departments or employees in your enterprise, you can force BitLocker into recovery before the computer is given to a new user.
## <a href="" id="bkmk-testingrecovery"></a>Testing recovery
Before you create a thorough BitLocker recovery process, we recommend that you test how the recovery process works for both end users (people who call your helpdesk for the recovery password) and administrators (people who help the end user get the recovery password). The –forcerecovery command of manage-bde is an easy way for you to step through the recovery process before your users encounter a recovery situation.
Before you create a thorough BitLocker recovery process, we recommend that you test how the recovery process works for both end users (people who call your helpdesk for the recovery password) and administrators (people who help the end user get the recovery password). The -forcerecovery command of manage-bde is an easy way for you to step through the recovery process before your users encounter a recovery situation.
**To force a recovery for the local computer**
**To force a recovery for the local computer:**
1. Click the **Start** button, type **cmd** in the **Start Search** box, right-click **cmd.exe**, and then click **Run as administrator**.
2. At the command prompt, type the following command and then press ENTER:
1. Select the **Start** button, type *cmd* in the **Start Search** box, right-click **cmd.exe**, and then select **Run as administrator**.
2. At the command prompt, type the following command and then press **Enter**:
`manage-bde -forcerecovery <BitLockerVolume>`
**To force recovery for a remote computer**
**To force recovery for a remote computer:**
1. On the Start screen, type **cmd.exe**, and then click **Run as administrator**.
2. At the command prompt, type the following command and then press ENTER:
1. On the Start screen, type **cmd.exe**, and then select **Run as administrator**.
2. At the command prompt, type the following command and then press ENTER:
`manage-bde -ComputerName <RemoteComputerName> -forcerecovery <BitLockerVolume>`
> [!NOTE]
> Recovery triggered by `-forcerecovery` persists for multiple restarts until a TPM protector is added or protection is suspended by the user. When using Modern Standby devices (such as Surface devices), the `-forcerecovery` option is not recommended because BitLocker will have to be unlocked and disabled manually from the WinRE environment before the OS can boot up again. For more information, see [BitLocker Troubleshooting: Continuous reboot loop with BitLocker recovery on a slate device](https://social.technet.microsoft.com/wiki/contents/articles/18671.bitlocker-troubleshooting-continuous-reboot-loop-with-bitlocker-recovery-on-a-slate-device.aspx).
## <a href="" id="bkmk-planningrecovery"></a>Planning your recovery process
When planning the BitLocker recovery process, first consult your organization's current best practices for recovering sensitive information. For example: How does your enterprise handle lost Windows passwords? How does your organization perform smart card PIN resets? You can use these best practices and related resources (people and tools) to help formulate a BitLocker recovery model.
Organizations that rely on BitLocker Drive Encryption and BitLocker To Go to protect data on a large number of computers and removable drives running the Windows 10, Windows 8, or Windows 7 operating systems and Windows to Go should consider using the Microsoft BitLocker Administration and Monitoring (MBAM) Tool version 2.0, which is included in the Microsoft Desktop Optimization Pack (MDOP) for Microsoft Software Assurance. MBAM makes BitLocker implementations easier to deploy and manage and allows administrators to provision and monitor encryption for operating system and fixed drives. MBAM prompts the user before encrypting fixed drives. MBAM also manages recovery keys for fixed and removable drives, making recovery easier to manage. MBAM can be used as part of a Microsoft System Center deployment or as a stand-alone solution. For more info, see [Microsoft BitLocker Administration and Monitoring](/microsoft-desktop-optimization-pack/mbam-v25/).
After a BitLocker recovery has been initiated, users can use a recovery password to unlock access to encrypted data. You must consider both self-recovery and recovery password retrieval methods for your organization.
After a BitLocker recovery has been initiated, users can use a recovery password to unlock access to encrypted data. Consider both self-recovery and recovery password retrieval methods for your organization.
When you determine your recovery process, you should:
- Become familiar with how you can retrieve the recovery password. See:
- Become familiar with how you can retrieve the recovery password. See:
- [Self-recovery](#bkmk-selfrecovery)
- [Recovery password retrieval](#bkmk-recoveryretrieval)
- [Self-recovery](#bkmk-selfrecovery)
- [Recovery password retrieval](#bkmk-recoveryretrieval)
- Determine a series of steps for post-recovery, including analyzing why the recovery occurred and resetting the recovery password. See:
- Determine a series of steps for post-recovery, including analyzing why the recovery occurred and resetting the recovery password. See:
- [Post-recovery analysis](#bkmk-planningpostrecovery)
- [Post-recovery analysis](#bkmk-planningpostrecovery)
### <a href="" id="bkmk-selfrecovery"></a>Self-recovery
In some cases, users might have the recovery password in a printout or a USB flash drive and can perform self-recovery. We recommend that your organization create a policy for self-recovery. If self-recovery includes using a password or recovery key stored on a USB flash drive, the users should be warned not to store the USB flash drive in the same place as the PC, especially during travel, for example if both the PC and the recovery items are in the same bag it would be very easy for access to be gained to the PC by an unauthorized user. Another policy to consider is having users contact the Helpdesk before or after performing self-recovery so that the root cause can be identified.
In some cases, users might have the recovery password in a printout or a USB flash drive and can perform self-recovery. We recommend that your organization create a policy for self-recovery. If self-recovery includes using a password or recovery key stored on a USB flash drive, the users should be warned not to store the USB flash drive in the same place as the PC, especially during travel, for example if both the PC and the recovery items are in the same bag, then it's easy for an unauthorized user to access the PC. Another policy to consider is having users contact the Helpdesk before or after performing self-recovery so that the root cause can be identified.
### <a href="" id="bkmk-recoveryretrieval"></a>Recovery password retrieval
If the user does not have a recovery password in a printout or on a USB flash drive, the user will need to be able to retrieve the recovery password from an online source. If the PC is a member of a domain the recovery password can be backed up to AD DS. However, this does not happen by default, you must have configured the appropriate Group Policy settings before BitLocker was enabled on the PC. BitLocker Group Policy settings can be found in the Local Group Policy Editor or the Group Policy Management Console (GPMC) under **Computer Configuration\\Administrative Templates\\Windows Components\\BitLocker Drive Encryption**. The following policy settings define the recovery methods that can be used to restore access to a BitLocker-protected drive if an authentication method fails or is unable to be used.
If the user does not have a recovery password in a printout or on a USB flash drive, the user will need to be able to retrieve the recovery password from an online source. If the PC is a member of a domain, the recovery password can be backed up to AD DS. However, this does not happen by default. You must have configured the appropriate Group Policy settings before BitLocker was enabled on the PC. BitLocker Group Policy settings can be found in the Local Group Policy Editor or the Group Policy Management Console (GPMC) under **Computer Configuration\\Administrative Templates\\Windows Components\\BitLocker Drive Encryption**. The following policy settings define the recovery methods that can be used to restore access to a BitLocker-protected drive if an authentication method fails or is unable to be used.
- **Choose how BitLocker-protected operating system drives can be recovered**
- **Choose how BitLocker-protected fixed drives can be recovered**
- **Choose how BitLocker-protected removable drives can be recovered**
- **Choose how BitLocker-protected operating system drives can be recovered**
- **Choose how BitLocker-protected fixed drives can be recovered**
- **Choose how BitLocker-protected removable drives can be recovered**
In each of these policies, select **Save BitLocker recovery information to Active Directory Domain Services** and then choose which BitLocker recovery information to store in Active Directory Domain Services (AD DS). Select the **Do not enable BitLocker until recovery information is stored in AD
DS** check box if you want to prevent users from enabling BitLocker unless the computer is connected to the domain and the backup of BitLocker recovery information for the drive to AD DS succeeds.
@ -155,24 +162,28 @@ The BitLocker Recovery Password Viewer for Active Directory Users and Computers
You can use the following list as a template for creating your own recovery process for recovery password retrieval. This sample process uses the BitLocker Recovery Password Viewer for Active Directory Users and Computers tool.
- [Record the name of the user's computer](#bkmk-recordcomputername)
- [Verify the user's identity](#bkmk-verifyidentity)
- [Locate the recovery password in AD DS](#bkmk-locatepassword)
- [Gather information to determine why recovery occurred](#bkmk-gatherinfo)
- [Give the user the recovery password](#bkmk-givepassword)
- [Record the name of the user's computer](#bkmk-recordcomputername)
- [Verify the user's identity](#bkmk-verifyidentity)
- [Locate the recovery password in AD DS](#bkmk-locatepassword)
- [Gather information to determine why recovery occurred](#bkmk-gatherinfo)
- [Give the user the recovery password](#bkmk-givepassword)
### <a href="" id="bkmk-recordcomputername"></a>Record the name of the user's computer
You can use the name of the user's computer to locate the recovery password in AD DS. If the user does not know the name of the computer, ask the user to read the first word of the **Drive Label** in the **BitLocker Drive Encryption Password Entry** user interface. This is the computer name when BitLocker was enabled and is probably the current name of the computer.
### <a href="" id="bkmk-verifyidentity"></a>Verify the user's identity
You should verify that the person that is asking for the recovery password is truly the authorized user of that computer. You may also wish to verify that the computer with the name the user provided belongs to the user.
Verify that the person that is asking for the recovery password is truly the authorized user of that computer. You might also want to verify that the computer with the name the user provided belongs to the user.
### <a href="" id="bkmk-locatepassword"></a>Locate the recovery password in AD DS
Locate the Computer object with the matching name in AD DS. Because Computer object names are listed in the AD DS global catalog, you should be able to locate the object even if you have a multi-domain forest.
### Multiple recovery passwords
If multiple recovery passwords are stored under a computer object in AD DS, the name of the BitLocker recovery information object includes the date that the password was created.
@ -181,26 +192,30 @@ If at any time you are unsure what password to provide, or if you think you migh
Since the password ID is a unique value that is associated with each recovery password stored in AD DS, running a query using this ID will find the correct password to unlock the encrypted volume.
### <a href="" id="bkmk-gatherinfo"></a>Gather information to determine why recovery occurred
Before you give the user the recovery password, you should gather any information that will help determine why the recovery was needed, in order to analyze the root cause during the post-recovery analysis. For more info about post-recovery analysis, see [Post-recovery analysis](#bkmk-planningpostrecovery).
### <a href="" id="bkmk-givepassword"></a>Give the user the recovery password
Because the recovery password is 48 digits long the user may need to record the password by writing it down or typing it on a different computer. If you are using MBAM, the recovery password will be regenerated after it is recovered from the MBAM database to avoid the security risks associated with an uncontrolled password.
Because the recovery password is 48 digits long, the user might need to record the password by writing it down or typing it on a different computer. If you are using MBAM, the recovery password will be regenerated after it is recovered from the MBAM database to avoid the security risks associated with an uncontrolled password.
> [!NOTE]
> Because the 48-digit recovery password is long and contains a combination of digits, the user might mishear or mistype the password. The boot-time recovery console uses built-in checksum numbers to detect input errors in each 6-digit block of the 48-digit recovery password, and offers the user the opportunity to correct such errors.
### <a href="" id="bkmk-planningpostrecovery"></a>Post-recovery analysis
When a volume is unlocked using a recovery password, an event is written to the event log and the platform validation measurements are reset in the TPM to match the current configuration. Unlocking the volume means that the encryption key has been released and is ready for on-the-fly encryption
when data is written to the volume, and on-the-fly decryption when data is read from the volume. After the volume is unlocked, BitLocker behaves the same way, regardless of how the access was granted.
If you notice that a computer is having repeated recovery password unlocks, you might want to have an administrator can perform post-recovery analysis to determine the root cause of the recovery and refresh BitLocker platform validation so that the user no longer needs to enter a recovery password each time that the computer starts up. See:
If you notice that a computer is having repeated recovery password unlocks, you might want to have an administrator perform post-recovery analysis to determine the root cause of the recovery and refresh BitLocker platform validation so that the user no longer needs to enter a recovery password each time that the computer starts up. See:
- [Determine the root cause of the recovery](#bkmk-determinecause)
- [Refresh BitLocker protection](#bkmk-refreshprotection)
- [Determine the root cause of the recovery](#bkmk-determinecause)
- [Refresh BitLocker protection](#bkmk-refreshprotection)
### <a href="" id="bkmk-determinecause"></a>Determine the root cause of the recovery
@ -210,14 +225,15 @@ While an administrator can remotely investigate the cause of recovery in some ca
Review and answer the following questions for your organization:
1. What BitLocker protection mode is in effect (TPM, TPM + PIN, TPM + startup key, startup key only)? Which PCR profile is in use on the PC?
2. Did the user merely forget the PIN or lose the startup key? If a token was lost, where might the token be?
3. If TPM mode was in effect, was recovery caused by a boot file change?
4. If recovery was caused by a boot file change, is this due to an intended user action (for example, BIOS upgrade), or to malicious software?
5. When was the user last able to start the computer successfully, and what might have happened to the computer since then?
6. Might the user have encountered malicious software or left the computer unattended since the last successful startup?
1. What BitLocker protection mode is in effect (TPM, TPM + PIN, TPM + startup key, startup key only)? Which PCR profile is in use on the PC?
2. Did the user merely forget the PIN or lose the startup key? If a token was lost, where might the token be?
3. If TPM mode was in effect, was recovery caused by a boot file change?
4. If recovery was caused by a boot file change, was the change an intended user action (for example, BIOS upgrade), or was it caused by malicious software?
5. When was the user last able to start the computer successfully, and what might have happened to the computer since then?
6. Might the user have encountered malicious software or left the computer unattended since the last successful startup?
To help you answer these questions, use the BitLocker command-line tool to view the current configuration and protection mode (for example, **manage-bde -status**). Scan the event log to find events that help indicate why recovery was initiated (for example, if the boot file changed). Both of these capabilities can be performed remotely.
To help you answer these questions, use the BitLocker command-line tool to view the current configuration and protection mode (for example, **manage-bde -status**). Scan the event log to find events that help indicate why recovery was initiated (for example, if boot file change occurred). Both of these capabilities can be performed remotely.
### <a href="" id="bkmk-refreshprotection"></a>Resolve the root cause
@ -231,18 +247,21 @@ The details of this reset can vary according to the root cause of the recovery.
- [Unknown PIN](#bkmk-unknownpin)
- [Lost startup key](#bkmk-loststartup)
- [Changes to boot files](#bkmk-changebootknown)
### <a href="" id="bkmk-unknownpin"></a>Unknown PIN
### <a href="" id="bkmk-unknownpin"></a>Unknown PIN
If a user has forgotten the PIN, you must reset the PIN while you are logged on to the computer in order to prevent BitLocker from initiating recovery each time the computer is restarted.
**To prevent continued recovery due to an unknown PIN**
1. Unlock the computer using the recovery password.
2. Reset the PIN:
1. Right-click the drive and then click **Change PIN**
2. In the BitLocker Drive Encryption dialog, click **Reset a forgotten PIN**. If you are not logged in with an administrator account you must provide administrative credentials at this time.
3. In the PIN reset dialog, provide and confirm the new PIN to use and then click **Finish**.
3. You will use the new PIN the next time you unlock the drive.
1. Unlock the computer using the recovery password.
2. Reset the PIN:
1. Right-click the drive and then select **Change PIN**.
2. In the BitLocker Drive Encryption dialog, select **Reset a forgotten PIN**. If you are not logged in with an administrator account, provide administrative credentials at this time.
3. In the PIN reset dialog, provide and confirm the new PIN to use and then select **Finish**.
3. You will use the new PIN the next time you unlock the drive.
### <a href="" id="bkmk-loststartup"></a>Lost startup key
@ -250,22 +269,26 @@ If you have lost the USB flash drive that contains the startup key, then you mus
**To prevent continued recovery due to a lost startup key**
1. Log on as an administrator to the computer that has the lost startup key.
2. Open Manage BitLocker.
3. Click **Duplicate start up key**, insert the clean USB drive on which you are going to write the key and then click **Save**.
1. Log on as an administrator to the computer that has the lost startup key.
2. Open Manage BitLocker.
3. Select **Duplicate start up key**, insert the clean USB drive on which you are going to write the key and then select **Save**.
### <a href="" id="bkmk-changebootknown"></a>Changes to boot files
This error might occur if you updated the firmware. As a best practice you should suspend BitLocker before making changes the firmware and then resume protection after the update has completed. This prevents the computer from going into recovery mode. However if changes were made when BitLocker protection was on you can simply log on to the computer using the recovery password and the platform validation profile will be updated so that recovery will not occur the next time.
This error might occur if you updated the firmware. As a best practice, you should suspend BitLocker before making changes to the firmware and then resume protection after the update has completed. This action prevents the computer from going into recovery mode. However if changes were made when BitLocker protection was on, then log on to the computer using the recovery password, and the platform validation profile will be updated so that recovery will not occur the next time.
## Windows RE and BitLocker Device Encryption
Windows Recovery Environment (RE) can be used to recover access to a drive protected by [BitLocker Device Encryption](bitlocker-device-encryption-overview-windows-10.md). If a PC is unable to boot after two failures, Startup Repair will automatically start. When Startup Repair is launched automatically due to boot failures, it will only execute operating system and driver file repairs, provided that the boot logs or any available crash dump point to a specific corrupted file. In Windows 8.1 and later, devices that include firmware to support specific TPM measurements for PCR\[7\] the TPM can validate that Windows RE is a trusted operating environment and will unlock any BitLocker-protected drives if Windows RE has not been modified. If the Windows RE environment has been modified, for example the TPM has been disabled, the drives will stay locked until the BitLocker recovery key is provided. If Startup Repair is not able to be run automatically from the PC and instead Windows RE is manually started from a repair disk, the BitLocker recovery key must be provided to unlock the BitLocker–protected drives.
Windows Recovery Environment (RE) can be used to recover access to a drive protected by [BitLocker Device Encryption](bitlocker-device-encryption-overview-windows-10.md). If a PC is unable to boot after two failures, Startup Repair will automatically start. When Startup Repair is launched automatically due to boot failures, it will only execute operating system and driver file repairs, provided that the boot logs or any available crash dump point to a specific corrupted file. In Windows 8.1 and later, devices that include firmware to support specific TPM measurements for PCR\[7\] the TPM can validate that Windows RE is a trusted operating environment and will unlock any BitLocker-protected drives if Windows RE has not been modified. If the Windows RE environment has been modified, for example the TPM has been disabled, the drives will stay locked until the BitLocker recovery key is provided. If Startup Repair can't run automatically from the PC and instead Windows RE is manually started from a repair disk, then the BitLocker recovery key must be provided to unlock the BitLocker–protected drives.
## BitLocker recovery screen
During BitLocker recovery, Windows can display a custom recovery message and hints that identify where a key can be retrieved from. These improvements can help a user during BitLocker recovery.
### Custom recovery message
BitLocker Group Policy settings in Windows 10, version 1511, let you configure a custom recovery message and URL on the BitLocker recovery screen, which can include the address of the BitLocker self-service recovery portal, the IT internal website, or a phone number for support.
@ -281,9 +304,10 @@ Example of customized recovery screen:
![Customized BitLocker Recovery Screen](./images/bl-password-hint1.png)
### BitLocker recovery key hints
BitLocker metadata has been enhanced in Windows 10, version 1903 to include information about when and where the BitLocker recovery key was backed up. This information is not exposed through the UI or any public API. It is used solely by the BitLocker recovery screen in the form of hints to help a user locate a volume's recovery key. Hints are displayed on the recovery screen and refer to the location where key has been saved. Hints are displayed in both the modern (blue) and legacy (black) recovery screen. This applies to both the bootmanager recovery screen and the WinRE unlock screen.
BitLocker metadata has been enhanced in Windows 10, version 1903 to include information about when and where the BitLocker recovery key was backed up. This information is not exposed through the UI or any public API. It is used solely by the BitLocker recovery screen in the form of hints to help a user locate a volume's recovery key. Hints are displayed on the recovery screen and refer to the location where the key has been saved. Hints are displayed on both the modern (blue) and legacy (black) recovery screen. This applies to both the boot manager recovery screen and the WinRE unlock screen.
![Customized BitLocker recovery screen](./images/bl-password-hint2.png)
@ -302,6 +326,7 @@ There are rules governing which hint is shown during the recovery (in order of p
8. There is no specific hint for keys saved to an on-premises Active Directory. In this case, a custom message (if configured) or a generic message, "Contact your organization's help desk," will be displayed.
9. If two recovery keys are present on the disk, but only one has been successfully backed up, the system will ask for a key that has been backed up, even if another key is newer.
#### Example 1 (single recovery key with single backup)
| Custom URL | Yes |
@ -312,9 +337,10 @@ There are rules governing which hint is shown during the recovery (in order of p
| Printed | No |
| Saved to file | No |
**Result:** The hint for the Microsoft Account and custom URL are displayed.
**Result:** The hint for the Microsoft Account and the custom URL are displayed.
![Example 1 of Customized BitLocker recovery screen](./images/rp-example1.png)
![Example 1 of Customized BitLocker recovery screen](./images/rp-example1.PNG)
#### Example 2 (single recovery key with single backup)
@ -328,7 +354,8 @@ There are rules governing which hint is shown during the recovery (in order of p
**Result:** Only the custom URL is displayed.
![Example 2 of customized BitLocker recovery screen](./images/rp-example2.PNG)
![Example 2 of customized BitLocker recovery screen](./images/rp-example2.png)
#### Example 3 (single recovery key with multiple backups)
@ -342,7 +369,8 @@ There are rules governing which hint is shown during the recovery (in order of p
**Result:** Only the Microsoft Account hint is displayed.
![Example 3 of customized BitLocker recovery screen](./images/rp-example3.PNG)
![Example 3 of customized BitLocker recovery screen](./images/rp-example3.png)
#### Example 4 (multiple recovery passwords)
@ -350,7 +378,7 @@ There are rules governing which hint is shown during the recovery (in order of p
|----------------------|-----------------|
| Saved to Microsoft Account | No |
| Saved to Azure AD | No |
| Saved to Acive Directory | No |
| Saved to Active Directory | No |
| Printed | No |
| Saved to file | Yes |
| Creation time | **1PM** |
@ -371,7 +399,8 @@ There are rules governing which hint is shown during the recovery (in order of p
**Result:** Only the hint for a successfully backed up key is displayed, even if it isn't the most recent key.
![Example 4 of customized BitLocker recovery screen](./images/rp-example4.PNG)
![Example 4 of customized BitLocker recovery screen](./images/rp-example4.png)
#### Example 5 (multiple recovery passwords)
@ -400,12 +429,14 @@ There are rules governing which hint is shown during the recovery (in order of p
**Result:** The hint for the most recent key is displayed.
![Example 5 of customized BitLocker recovery screen](./images/rp-example5.PNG)
![Example 5 of customized BitLocker recovery screen](./images/rp-example5.png)
## <a href="" id="bkmk-usingaddrecovery"></a>Using additional recovery information
Besides the 48-digit BitLocker recovery password, other types of recovery information are stored in Active Directory. This section describes how this additional information can be used.
### BitLocker key package
If the recovery methods discussed earlier in this document do not unlock the volume, you can use the BitLocker Repair tool to decrypt the volume at the block level. The tool uses the BitLocker key package to help recover encrypted data from severely damaged drives. You can then use this recovered data to salvage encrypted data, even after the correct recovery password has failed to unlock the damaged volume. We recommend that you still save the recovery password. A key package cannot be used without the corresponding recovery password.
@ -413,38 +444,39 @@ If the recovery methods discussed earlier in this document do not unlock the vol
> [!NOTE]
> You must use the BitLocker Repair tool **repair-bde** to use the BitLocker key package.
The BitLocker key package is not saved by default. To save the package along with the recovery password in AD DS you must select the **Backup recovery password and key package** option in the Group Policy settings that control the recovery method. You can also export the key package from a working volume. For more details on how to export key packages, see [Retrieving the BitLocker Key Package](#bkmk-appendixc).
The BitLocker key package is not saved by default. To save the package along with the recovery password in AD DS, you must select the **Backup recovery password and key package** option in the Group Policy settings that control the recovery method. You can also export the key package from a working volume. For more details about how to export key packages, see [Retrieving the BitLocker Key Package](#bkmk-appendixc).
## <a href="" id="bkmk-appendixb"></a>Resetting recovery passwords
You should invalidate a recovery password after it has been provided and used. It should also be done when you intentionally want to invalidate an existing recovery password for any reason.
Invalidate a recovery password after it has been provided and used. It should also be done when you intentionally want to invalidate an existing recovery password for any reason.
You can reset the recovery password in two ways:
- **Use manage-bde** You can use manage-bde to remove the old recovery password and add a new recovery password. The procedure identifies the command and the syntax for this method.
- **Run a script** You can run a script to reset the password without decrypting the volume. The sample script in the procedure illustrates this functionality. The sample script creates a new recovery password and invalidates all other passwords.
- **Use manage-bde**: You can use manage-bde to remove the old recovery password and add a new recovery password. The procedure identifies the command and the syntax for this method.
- **Run a script**: You can run a script to reset the password without decrypting the volume. The sample script in the procedure illustrates this functionality. The sample script creates a new recovery password and invalidates all other passwords.
**To reset a recovery password using manage-bde**
**To reset a recovery password using manage-bde:**
1. Remove the previous recovery password
1. Remove the previous recovery password
```powershell
Manage-bde –protectors –delete C: –type RecoveryPassword
```
2. Add the new recovery password
2. Add the new recovery password
```powershell
Manage-bde –protectors –add C: -RecoveryPassword
```
3. Get the ID of the new recovery password. From the screen copy the ID of the recovery password.
3. Get the ID of the new recovery password. From the screen, copy the ID of the recovery password.
```powershell
Manage-bde –protectors –get C: -Type RecoveryPassword
```
4. Backup the new recovery password to AD DS
4. Back up the new recovery password to AD DS.
```powershell
Manage-bde –protectors –adbackup C: -id {EXAMPLE6-5507-4924-AA9E-AFB2EB003692}
@ -452,11 +484,11 @@ You can reset the recovery password in two ways:
> [!WARNING]
> You must include the braces in the ID string.
**To run the sample recovery password script**
1. Save the following sample script in a VBScript file. For example: ResetPassword.vbs.
2. At the command prompt, type a command similar to the following:
**To run the sample recovery password script:**
1. Save the following sample script in a VBScript file. For example: ResetPassword.vbs.
2. At the command prompt, type a command similar to the following sample script:
**cscript ResetPassword.vbs**
@ -466,7 +498,7 @@ You can reset the recovery password in two ways:
> [!NOTE]
> To manage a remote computer, you can specify the remote computer name rather than the local computer name.
You can use the following sample script to create a VBScript file to reset the recovery passwords.
You can use the following sample script to create a VBScript file to reset the recovery passwords:
```vb
' Target drive letter
@ -539,23 +571,24 @@ WScript.Echo "A new recovery password has been added. Old passwords have been re
'WScript.Echo "Type ""manage-bde -protectors -get " & strDriveLetter & " -type recoverypassword"" to view existing passwords."
```
## <a href="" id="bkmk-appendixc"></a>Retrieving the BitLocker key package
You can use two methods to retrieve the key package, as described in [Using Additional Recovery Information](#bkmk-usingaddrecovery):
- **Export a previously-saved key package from AD DS.** You must have Read access to BitLocker recovery passwords that are stored in AD DS.
- **Export a new key package from an unlocked, BitLocker-protected volume.** You must have local administrator access to the working volume, before any damage has occurred.
- **Export a previously saved key package from AD DS.** You must have Read access to BitLocker recovery passwords that are stored in AD DS.
- **Export a new key package from an unlocked, BitLocker-protected volume.** You must have local administrator access to the working volume, before any damage has occurred.
The following sample script exports all previously-saved key packages from AD DS.
The following sample script exports all previously saved key packages from AD DS.
**To run the sample key package retrieval script**
**To run the sample key package retrieval script:**
1. Save the following sample script in a VBScript file. For example: GetBitLockerKeyPackageADDS.vbs.
2. At the command prompt, type a command similar to the following:
2. At the command prompt, type a command similar to the following sample script:
**cscript GetBitLockerKeyPackageADDS.vbs -?**
You can use the following sample script to create a VBScript file to retrieve the BitLocker key package from AD DS.
You can use the following sample script to create a VBScript file to retrieve the BitLocker key package from AD DS:
```vb
' --------------------------------------------------------------------------------
@ -697,10 +730,10 @@ WScript.Quit
The following sample script exports a new key package from an unlocked, encrypted volume.
**To run the sample key package retrieval script**
**To run the sample key package retrieval script:**
1. Save the following sample script in a VBScript file. For example: GetBitLockerKeyPackage.vbs
2. Open an administrator command prompt, type a command similar to the following:
2. Open an administrator command prompt, and then type a command similar to the following sample script:
**cscript GetBitLockerKeyPackage.vbs -?**
@ -882,6 +915,7 @@ Function BinaryToString(Binary)
End Function
```
## See also
- [BitLocker overview](bitlocker-overview.md)
- [BitLocker overview](bitlocker-overview.md)

4
windows/security/information-protection/bitlocker/bitlocker-recovery-loop-break.md
View File

@ -6,9 +6,9 @@ ms.prod: w10
ms.mktglfcycl: explore
ms.sitesec: library
ms.pagetype: security
ms.localizationpriority: #medium
ms.localizationpriority: medium
ms.author: v-maave
author: martyav
author: dansimp
manager: dansimp
audience: ITPro
ms.collection: M365-security-compliance

13
windows/security/information-protection/bitlocker/bitlocker-to-go-faq.md
View File

@ -1,6 +1,6 @@
---
title: BitLocker To Go FAQ (Windows 10)
description: Learn more about BitLocker To Go — BitLocker drive encryption for removable drives.
description: "Learn more about BitLocker To Go: BitLocker drive encryption for removable drives."
ms.assetid: c40f87ac-17d3-47b2-afc6-6c641f72ecee
ms.reviewer:
ms.author: dansimp
@ -25,7 +25,14 @@ ms.custom: bitlocker
## What is BitLocker To Go?
BitLocker To Go is BitLocker Drive Encryption on removable data drives. This includes the encryption of USB flash drives, SD cards, external hard disk drives, and other drives formatted by using the NTFS, FAT16, FAT32, or exFAT file systems. Drive partitioning must meet the [BitLocker Drive Encryption Partitioning Requirements](https://docs.microsoft.com/windows-hardware/manufacture/desktop/bitlocker-drive-encryption#bitlocker-drive-encryption-partitioning-requirements).
BitLocker To Go is BitLocker Drive Encryption on removable data drives. This feature includes the encryption of:
As with BitLocker, drives that are encrypted using BitLocker To Go can be opened with a password or smart card on another computer by using **BitLocker Drive Encryption** in Control Panel.
- USB flash drives
- SD cards
- External hard disk drives
- Other drives that are formatted by using the NTFS, FAT16, FAT32, or exFAT file system.
Drive partitioning must meet the [BitLocker Drive Encryption Partitioning Requirements](https://docs.microsoft.com/windows-hardware/manufacture/desktop/bitlocker-drive-encryption#bitlocker-drive-encryption-partitioning-requirements).
As with BitLocker, you can open drives that are encrypted by BitLocker To Go by using a password or smart card on another computer. In Control Panel, use **BitLocker Drive Encryption**.

46
windows/security/information-protection/bitlocker/bitlocker-use-bitlocker-drive-encryption-tools-to-manage-bitlocker.md
View File

@ -1,6 +1,6 @@
---
title: BitLocker Use BitLocker Drive Encryption Tools to manage BitLocker (Windows 10)
description: This topic for the IT professional describes how to use tools to manage BitLocker.
description: This article for the IT professional describes how to use tools to manage BitLocker.
ms.assetid: e869db9c-e906-437b-8c70-741dd61b5ea6
ms.reviewer:
ms.prod: w10
@ -23,9 +23,9 @@ ms.custom: bitlocker
**Applies to**
- Windows 10
This topic for the IT professional describes how to use tools to manage BitLocker.
This article for the IT professional describes how to use tools to manage BitLocker.
BitLocker Drive Encryption Tools include the command line tools manage-bde and repair-bde and the BitLocker cmdlets for Windows PowerShell.
BitLocker Drive Encryption Tools include the command-line tools manage-bde and repair-bde and the BitLocker cmdlets for Windows PowerShell.
Both manage-bde and the BitLocker cmdlets can be used to perform any task that can be accomplished through the BitLocker control panel and are appropriate to use for automated deployments and other scripting scenarios.
@ -39,11 +39,11 @@ Repair-bde is a special circumstance tool that is provided for disaster recovery
Manage-bde is a command-line tool that can be used for scripting BitLocker operations. Manage-bde offers additional options not displayed in the BitLocker control panel. For a complete list of the manage-bde options, see the [Manage-bde](https://technet.microsoft.com/library/ff829849.aspx) command-line reference.
Manage-bde includes less default settings and requires greater customization for configuring BitLocker. For example, using just the `manage-bde -on` command on a data volume will fully encrypt the volume without any authenticating protectors. A volume encrypted in this manner still requires user interaction to turn on BitLocker protection, even though the command successfully completed because an authentication method needs to be added to the volume for it to be fully protected. The following sections provide examples of common usage scenarios for manage-bde.
Manage-bde includes fewer default settings and requires greater customization for configuring BitLocker. For example, using just the `manage-bde -on` command on a data volume will fully encrypt the volume without any authenticating protectors. A volume encrypted in this manner still requires user interaction to turn on BitLocker protection, even though the command successfully completed because an authentication method needs to be added to the volume for it to be fully protected. The following sections provide examples of common usage scenarios for manage-bde.
### Using manage-bde with operating system volumes
Listed below are examples of basic valid commands for operating system volumes. In general, using only the `manage-bde -on <drive letter>` command will encrypt the operating system volume with a TPM-only protector and no recovery key. However, many environments require more secure protectors such as passwords or PIN and expect to be able to recover information with a recovery key. It is recommended that at least one primary protector and a recovery protector be added to an operating system volume.
Listed below are examples of basic valid commands for operating system volumes. In general, using only the `manage-bde -on <drive letter>` command will encrypt the operating system volume with a TPM-only protector and no recovery key. However, many environments require more secure protectors such as passwords or PIN and expect to be able to recover information with a recovery key. We recommend that you add at least one primary protector and a recovery protector to an operating system volume.
A good practice when using manage-bde is to determine the volume status on the target system. Use the following command to determine volume status:
@ -54,7 +54,7 @@ This command returns the volumes on the target, current encryption status, encry
![Using manage-bde to check encryption status](images/manage-bde-status.png)
The following example illustrates enabling BitLocker on a computer without a TPM chip. Before beginning the encryption process you must create the startup key needed for BitLocker and save it to the USB drive. When BitLocker is enabled for the operating system volume, the BitLocker will need to access the USB flash drive to obtain the encryption key (in this example, the drive letter E represents the USB drive). You will be prompted to reboot to complete the encryption process.
The following example illustrates enabling BitLocker on a computer without a TPM chip. Before beginning the encryption process, you must create the startup key needed for BitLocker and save it to the USB drive. When BitLocker is enabled for the operating system volume, the BitLocker will need to access the USB flash drive to obtain the encryption key (in this example, the drive letter E represents the USB drive). You will be prompted to reboot to complete the encryption process.
```powershell
manage-bde –protectors -add C: -startupkey E:
@ -63,30 +63,30 @@ manage-bde -on C:
>**Note:**  After the encryption is completed, the USB startup key must be inserted before the operating system can be started.
An alternative to the startup key protector on non-TPM hardware is to use a password and an **ADaccountorgroup** protector to protect the operating system volume. In this scenario, you would add the protectors first. This is done with the command:
An alternative to the startup key protector on non-TPM hardware is to use a password and an **ADaccountorgroup** protector to protect the operating system volume. In this scenario, you would add the protectors first. To add them, use this command:
```powershell
manage-bde -protectors -add C: -pw -sid <user or group>
```
This command will require you to enter and then confirm the password protector before adding them to the volume. With the protectors enabled on the volume, you can then turn BitLocker on.
This command will require you to enter and then confirm the password protector before adding them to the volume. With the protectors enabled on the volume, you can then turn on BitLocker.
On computers with a TPM it is possible to encrypt the operating system volume without any defined protectors using manage-bde. The command to do this is:
On computers with a TPM, it is possible to encrypt the operating system volume without any defined protectors using manage-bde. Use this command:
```powershell
manage-bde -on C:
```
This will encrypt the drive using the TPM as the default protector. If you are not sure if a TPM protector is available, to list the protectors available for a volume, run the following command:
This command encrypts the drive using the TPM as the default protector. If you are not sure if a TPM protector is available, to list the protectors available for a volume, run the following command:
```powershell
manage-bde -protectors -get <volume>
```
### Using manage-bde with data volumes
Data volumes use the same syntax for encryption as operating system volumes but they do not require protectors for the operation to complete. Encrypting data volumes can be done using the base command: `manage-bde -on <drive letter>` or you can choose to add additional protectors to the volume first. It is recommended that at least one primary protector and a recovery protector be added to a data volume.
Data volumes use the same syntax for encryption as operating system volumes but they do not require protectors for the operation to complete. Encrypting data volumes can be done using the base command: `manage-bde -on <drive letter>` or you can choose to add additional protectors to the volume first. We recommend that you add at least one primary protector and a recovery protector to a data volume.
A common protector for a data volume is the password protector. In the example below, we add a password protector to the volume and turn BitLocker on.
A common protector for a data volume is the password protector. In the example below, we add a password protector to the volume and turn on BitLocker.
```powershell
manage-bde -protectors -add -pw C:
@ -101,11 +101,11 @@ The BitLocker Repair Tool (Repair-bde) can be used to access encrypted data on a
>**Tip:**  If you are not backing up recovery information to AD DS or if you want to save key packages alternatively, you can use the command `manage-bde -KeyPackage` to generate a key package for a volume.
The Repair-bde command-line tool is intended for use when the operating system does not start or when you cannot start the BitLocker Recovery Console. You should use Repair-bde if the following conditions are true:
The Repair-bde command-line tool is intended for use when the operating system does not start or when you cannot start the BitLocker Recovery Console. Use Repair-bde if the following conditions are true:
1. You have encrypted the drive by using BitLocker Drive Encryption.
2. Windows does not start, or you cannot start the BitLocker recovery console.
3. You do not have a copy of the data that is contained on the encrypted drive.
- You have encrypted the drive by using BitLocker Drive Encryption.
- Windows does not start, or you cannot start the BitLocker recovery console.
- You do not have a copy of the data that is contained on the encrypted drive.
>**Note:**  Damage to the drive may not be related to BitLocker. Therefore, we recommend that you try other tools to help diagnose and resolve the problem with the drive before you use the BitLocker Repair Tool. The Windows Recovery Environment (Windows RE) provides additional options to repair computers.
@ -249,7 +249,7 @@ Windows PowerShell cmdlets provide a new way for administrators to use when work
Similar to manage-bde, the Windows PowerShell cmdlets allow configuration beyond the options offered in the control panel. As with manage-bde, users need to consider the specific needs of the volume they are encrypting prior to running Windows PowerShell cmdlets.
A good initial step is to determine the current state of the volume(s) on the computer. You can do this using the <code>Get-BitLockerVolume</code> cmdlet.
The <code>Get-BitLockerVolume</code> cmdlet output gives information on the volume type, protectors, protection status and other details.
The <code>Get-BitLockerVolume</code> cmdlet output gives information on the volume type, protectors, protection status, and other details.
>**Tip:**  Occasionally, all protectors may not be shown when using `Get-BitLockerVolume` due to lack of space in the output display. If you do not see all of the protectors for a volume, you can use the Windows PowerShell pipe command (|) to format a full listing of the protectors.
`Get-BitLockerVolume C: | fl`
@ -263,9 +263,9 @@ $vol = Get-BitLockerVolume
$keyprotectors = $vol.KeyProtector
```
Using this, you can display the information in the $keyprotectors variable to determine the GUID for each protector.
By using this script, you can display the information in the $keyprotectors variable to determine the GUID for each protector.
Using this information, you can then remove the key protector for a specific volume using the command:
By using this information, you can then remove the key protector for a specific volume using the command:
```powershell
Remove-BitLockerKeyProtector <volume>: -KeyProtectorID "{GUID}"
@ -291,8 +291,8 @@ Enable-BitLocker C: -StartupKeyProtector -StartupKeyPath <path> -SkipHardwareTes
### Using the BitLocker Windows PowerShell cmdlets with data volumes
Data volume encryption using Windows PowerShell is the same as for operating system volumes. You should add the desired protectors prior to encrypting the volume. The following example adds a password protector to the E: volume using the variable $pw as the password. The $pw variable is held as a
SecureString value to store the user defined password.
Data volume encryption using Windows PowerShell is the same as for operating system volumes. Add the desired protectors prior to encrypting the volume. The following example adds a password protector to the E: volume using the variable $pw as the password. The $pw variable is held as a
SecureString value to store the user-defined password.
```powershell
$pw = Read-Host -AsSecureString
@ -301,11 +301,11 @@ Enable-BitLockerKeyProtector E: -PasswordProtector -Password $pw
```
### Using an AD Account or Group protector in Windows PowerShell
The **ADAccountOrGroup** protector, introduced in Windows 8 and Windows Server 2012, is an Active Directory SID-based protector. This protector can be added to both operating system and data volumes, although it does not unlock operating system volumes in the pre-boot environment. The protector requires the SID for the domain account or group to link with the protector. BitLocker can protect a cluster-aware disk by adding a SID-based protector for the Cluster Name Object (CNO) that lets the disk properly failover to and be unlocked by any member computer of the cluster.
The **ADAccountOrGroup** protector, introduced in Windows 8 and Windows Server 2012, is an Active Directory SID-based protector. This protector can be added to both operating system and data volumes, although it does not unlock operating system volumes in the pre-boot environment. The protector requires the SID for the domain account or group to link with the protector. BitLocker can protect a cluster-aware disk by adding a SID-based protector for the Cluster Name Object (CNO) that lets the disk properly fail over to and be unlocked by any member computer of the cluster.
>**Warning:**  The **ADAccountOrGroup** protector requires the use of an additional protector for use (such as TPM, PIN, or recovery key) when used on operating system volumes
To add an **ADAccountOrGroup** protector to a volume requires either the actual domain SID or the group name preceded by the domain and a backslash. In the example below, the CONTOSO\\Administrator account is added as a protector to the data volume G.
To add an **ADAccountOrGroup** protector to a volume, use either the actual domain SID or the group name preceded by the domain and a backslash. In the example below, the CONTOSO\\Administrator account is added as a protector to the data volume G.
```powershell
Enable-BitLocker G: -AdAccountOrGroupProtector -AdAccountOrGroup CONTOSO\Administrator

8
windows/security/information-protection/bitlocker/bitlocker-using-with-other-programs-faq.md
View File

@ -37,7 +37,7 @@ BitLocker has a storage driver stack that ensures memory dumps are encrypted whe
## Can BitLocker support smart cards for pre-boot authentication?
BitLocker does not support smart cards for pre-boot authentication. There is no single industry standard for smart card support in the firmware, and most computers either do not implement firmware support for smart cards, or only support specific smart cards and readers. This lack of standardization makes supporting them very difficult.
BitLocker does not support smart cards for pre-boot authentication. There is no single industry standard for smart card support in the firmware, and most computers either do not implement firmware support for smart cards, or only support specific smart cards and readers. This lack of standardization makes supporting them difficult.
## Can I use a non-Microsoft TPM driver?
@ -69,7 +69,7 @@ The **Save to USB** option is not shown by default for removable drives. If the
## Why am I unable to automatically unlock my drive?
Automatic unlocking for fixed data drives requires that the operating system drive also be protected by BitLocker. If you are using a computer that does not have a BitLocker-protected operating system drive, the drive cannot be automatically unlocked. For removable data drives, you can add automatic unlocking by right-clicking the drive in Windows Explorer and clicking **Manage BitLocker**. You will still be able to use the password or smart card credentials you supplied when you turned on BitLocker to unlock the removable drive on other computers.
Automatic unlocking for fixed data drives requires the operating system drive to also be protected by BitLocker. If you are using a computer that does not have a BitLocker-protected operating system drive, the drive cannot be automatically unlocked. For removable data drives, you can add automatic unlocking by right-clicking the drive in Windows Explorer and clicking **Manage BitLocker**. You will still be able to use the password or smart card credentials you supplied when you turned on BitLocker to unlock the removable drive on other computers.
## Can I use BitLocker in Safe Mode?
@ -95,8 +95,8 @@ Yes. However, shadow copies made prior to enabling BitLocker will be automatical
## Does BitLocker support virtual hard disks (VHDs)?
BitLocker should work like any specific physical machine within its hardware limitations as long as the environment (physical or virtual) meets Windows Operating System requirements to run.
- With TPM - Yes it is supported
- Without TPM - Yes it is supported (with password protector)
- With TPM: Yes, it is supported.
- Without TPM: Yes, it is supported (with password protector).
BitLocker is also supported on data volume VHDs, such as those used by clusters, if you are running Windows 10, Windows 8.1, Windows 8, Windows Server 2016, Windows Server 2012 R2, or Windows Server 2012.

0
windows/security/information-protection/bitlocker/images/rp-example1.PNG → windows/security/information-protection/bitlocker/images/rp-example1.png
View File

Side by Side Swipe Overlay

Before

Width:  |  Height:  |  Size: 118 KiB

After

Width:  |  Height:  |  Size: 118 KiB

0
windows/security/information-protection/bitlocker/images/rp-example2.PNG → windows/security/information-protection/bitlocker/images/rp-example2.png
View File

Side by Side Swipe Overlay

Before

Width:  |  Height:  |  Size: 82 KiB

After

Width:  |  Height:  |  Size: 82 KiB

0
windows/security/information-protection/bitlocker/images/rp-example3.PNG → windows/security/information-protection/bitlocker/images/rp-example3.png
View File

Side by Side Swipe Overlay

Before

Width:  |  Height:  |  Size: 96 KiB

After

Width:  |  Height:  |  Size: 96 KiB

0
windows/security/information-protection/bitlocker/images/rp-example4.PNG → windows/security/information-protection/bitlocker/images/rp-example4.png
View File

Side by Side Swipe Overlay

Before

Width:  |  Height:  |  Size: 82 KiB

After

Width:  |  Height:  |  Size: 82 KiB

0
windows/security/information-protection/bitlocker/images/rp-example5.PNG → windows/security/information-protection/bitlocker/images/rp-example5.png
View File

Side by Side Swipe Overlay

Before

Width:  |  Height:  |  Size: 91 KiB

After

Width:  |  Height:  |  Size: 91 KiB

31
windows/security/information-protection/bitlocker/protecting-cluster-shared-volumes-and-storage-area-networks-with-bitlocker.md
View File

@ -1,6 +1,6 @@
---
title: Protecting cluster shared volumes and storage area networks with BitLocker (Windows 10)
description: This topic for IT pros describes how to protect CSVs and SANs with BitLocker.
description: This article for IT pros describes how to protect CSVs and SANs with BitLocker.
ms.assetid: ecd25a10-42c7-4d31-8a7e-ea52c8ebc092
ms.reviewer:
ms.prod: w10
@ -23,7 +23,7 @@ ms.custom: bitlocker
**Applies to**
- Windows Server 2016
This topic for IT pros describes how to protect CSVs and SANs with BitLocker.
This article for IT pros describes how to protect CSVs and SANs with BitLocker.
BitLocker can protect both physical disk resources and cluster shared volumes version 2.0 (CSV2.0). BitLocker on clustered volumes allows for an additional layer of protection for administrators wishing to protect sensitive, highly available data. By adding additional protectors to the clustered volume, administrators can also add an additional barrier of security to resources within an organization by allowing only certain user accounts access to unlock the BitLocker volume.
@ -38,15 +38,15 @@ BitLocker on volumes within a cluster are managed based on how the cluster servi
Alternatively, the volume can be a cluster-shared volume, a shared namespace, within the cluster. Windows Server 2012 expanded the CSV architecture, now known as CSV2.0, to enable support for BitLocker. When using BitLocker with volumes designated for a cluster, the volume will need to turn on
BitLocker before its addition to the storage pool within cluster or put the resource into maintenance mode before BitLocker operations will complete.
Windows PowerShell or the manage-bde command line interface is the preferred method to manage BitLocker on CSV2.0 volumes. This is recommended over the BitLocker Control Panel item because CSV2.0 volumes are mount points. Mount points are an NTFS object that is used to provide an entry point to other volumes. Mount points do not require the use of a drive letter. Volumes that lack drive letters do not appear in the BitLocker Control Panel item. Additionally, the new Active Directory-based protector option required for cluster disk resource or CSV2.0 resources is not available in the Control Panel item.
Windows PowerShell or the manage-bde command-line interface is the preferred method to manage BitLocker on CSV2.0 volumes. This method is recommended over the BitLocker Control Panel item because CSV2.0 volumes are mount points. Mount points are an NTFS object that is used to provide an entry point to other volumes. Mount points do not require the use of a drive letter. Volumes that lack drive letters do not appear in the BitLocker Control Panel item. Additionally, the new Active Directory-based protector option required for cluster disk resource or CSV2.0 resources is not available in the Control Panel item.
>**Note:**  Mount points can be used to support remote mount points on SMB based network shares. This type of share is not supported for BitLocker encryption.
For thinly provisioned storage, such as a Dynamic Virtual Hard Disk (VHD), BitLocker runs in Used Disk Space Only encryption mode. You cannot use the **manage-bde -WipeFreeSpace** command to transition the volume to full-volume encryption on these types of volumes. This is blocked in order to avoid expanding thinly provisioned volumes to occupy the entire backing store while wiping the unoccupied (free) space.
For thinly provisioned storage, such as a Dynamic Virtual Hard Disk (VHD), BitLocker runs in Used Disk Space Only encryption mode. You cannot use the **manage-bde -WipeFreeSpace** command to transition the volume to full-volume encryption on these types of volumes. This action is blocked in order to avoid expanding thinly provisioned volumes to occupy the entire backing store while wiping the unoccupied (free) space.
### Active Directory-based protector
You can also use an Active Directory Domain Services (AD DS) protector for protecting clustered volumes held within your AD DS infrastructure. The **ADAccountOrGroup** protector is a domain security identifier (SID)-based protector that can be bound to a user account, machine account or group. When an unlock request is made for a protected volume, the BitLocker service interrupts the request and uses the BitLocker protect/unprotect APIs to unlock or deny the request. BitLocker will unlock protected volumes without user intervention by attempting protectors in the following order:
You can also use an Active Directory Domain Services (AD DS) protector for protecting clustered volumes held within your AD DS infrastructure. The **ADAccountOrGroup** protector is a domain security identifier (SID)-based protector that can be bound to a user account, machine account, or group. When an unlock request is made for a protected volume, the BitLocker service interrupts the request and uses the BitLocker protect/unprotect APIs to unlock or deny the request. BitLocker will unlock protected volumes without user intervention by attempting protectors in the following order:
1. Clear key
2. Driver-based auto-unlock key
@ -61,7 +61,7 @@ You can also use an Active Directory Domain Services (AD DS) protector for prote
### Turning on BitLocker before adding disks to a cluster using Windows PowerShell
BitLocker encryption is available for disks before or after addition to a cluster storage pool. The advantage of encrypting volumes prior to adding them to a cluster is that the disk resource does not require suspending the resource to complete the operation. To turn on BitLocker for a disk before adding it to a cluster, do the following:
BitLocker encryption is available for disks before or after addition to a cluster storage pool. The advantage of encrypting volumes prior to adding them to a cluster is that the disk resource does not require suspending the resource to complete the operation. To turn on BitLocker for a disk before adding it to a cluster:
1. Install the BitLocker Drive Encryption feature if it is not already installed.
2. Ensure the disk is formatted NTFS and has a drive letter assigned to it.
@ -84,7 +84,7 @@ BitLocker encryption is available for disks before or after addition to a cluste
### Turning on BitLocker for a clustered disk using Windows PowerShell
When the cluster service owns a disk resource already, it needs to be set into maintenance mode before BitLocker can be enabled. Use the following steps for turning BitLocker on for a clustered disk:
When the cluster service owns a disk resource already, it needs to be set into maintenance mode before BitLocker can be enabled. Use the following steps for turning on BitLocker for a clustered disk:
1. Install the BitLocker Drive Encryption feature if it is not already installed.
2. Check the status of the cluster disk using Windows PowerShell.
@ -122,11 +122,11 @@ When the cluster service owns a disk resource already, it needs to be set into m
### Adding BitLocker encrypted volumes to a cluster using manage-bde
You can also use manage-bde to enable BitLocker on clustered volumes. The steps needed to add a physical disk resource or CSV2.0 volume to an existing cluster includes the following:
You can also use manage-bde to enable BitLocker on clustered volumes. Follow these steps to add a physical disk resource or CSV2.0 volume to an existing cluster:
1. Verify the BitLocker Drive Encryption feature is installed on the computer.
2. Ensure new storage is formatted as NTFS.
3. Encrypt the volume, add a recovery key and add the cluster administrator as a protector key using the manage-bde command line interface (see example):
3. Encrypt the volume, add a recovery key, and add the cluster administrator as a protector key by using the manage-bde command-line interface (see example):
- `Manage-bde -on -used <drive letter> -RP -sid domain\CNO$ -sync`
@ -135,16 +135,17 @@ You can also use manage-bde to enable BitLocker on clustered volumes. The steps
4. Open the Failover Cluster Manager snap-in or cluster PowerShell cmdlets to enable the disk to be clustered
- Once the disk is clustered it can also be enabled for CSV.
- Once the disk is clustered, it can also be enabled for CSV.
5. During the resource online operation, cluster will check to see if the disk is BitLocker encrypted.
1. If the volume is not BitLocker enabled, traditional cluster online operations occur.
2. If the volume is BitLocker enabled, the following check occurs:
- If volume is **locked**, BitLocker will impersonate the CNO and unlock the volume using the CNO protector. If this operation fails an event will be logged that the volume could not be unlocked and the online operation will fail.
- If volume is **locked**, BitLocker will impersonate the CNO and unlock the volume using the CNO protector. If this operation fails, an event will be logged that the volume could not be unlocked and the online operation will fail.
6. Once the disk is online in the storage pool, it can be added to a CSV by right-clicking the disk resource and choosing **Add to cluster shared volumes**.
6. Once the disk is online in the storage pool, it can be added to a CSV by right clicking on the disk resource and choosing "**Add to cluster shared volumes**".
CSVs can include both encrypted and unencrypted volumes. To check the status of a particular volume for BitLocker encryption, administrators can utilize the manage-bde -status command with a path to the volume inside the CSV namespace as seen in the example command line below.
```powershell
@ -153,11 +154,11 @@ manage-bde -status "C:\ClusterStorage\volume1"
### Physical Disk Resources
Unlike CSV2.0 volumes, physical disk resources can only be accessed by one cluster node at a time. This means that operations such as encrypting, decrypting, locking or unlocking volumes require context to perform. For example, you cannot unlock or decrypt a physical disk resource if you are not administering the cluster node that owns the disk resource because the disk resource is not available.
Unlike CSV2.0 volumes, physical disk resources can only be accessed by one cluster node at a time. So operations such as encrypting, decrypting, locking, or unlocking volumes require context to perform. For example, you cannot unlock or decrypt a physical disk resource if you are not administering the cluster node that owns the disk resource because the disk resource is not available.
### Restrictions on BitLocker actions with cluster volumes
The following table contains information about both Physical Disk Resources (i.e. traditional failover cluster volumes) and Cluster Shared Volumes (CSV) and the actions that are allowed by BitLocker in each situation.
The following table contains information about both Physical Disk Resources (that is, traditional failover cluster volumes) and Cluster Shared Volumes (CSV) and the actions that are allowed by BitLocker in each situation.
<table>
<colgroup>
@ -268,7 +269,7 @@ In the case where a physical disk resource experiences a failover event during c
### Other considerations when using BitLocker on CSV2.0
Some other considerations to take into account for BitLocker on clustered storage include the following:
Also take these considerations into account for BitLocker on clustered storage:
- BitLocker volumes have to be initialized and beginning encryption before they are available to add to a CSV2.0 volume.
- If an administrator needs to decrypt a CSV volume, remove the volume from the cluster or put into disk maintenance mode. You can add the CSV back to the cluster while waiting for decryption to complete.
- If an administrator needs to start encrypting a CSV volume, remove the volume from the cluster or put it in maintenance mode.

27
windows/security/information-protection/bitlocker/ts-bitlocker-cannot-encrypt-tpm-issues.md
View File

@ -1,5 +1,5 @@
---
title: BitLocker cannot encrypt a drive known TPM issues
title: BitLocker cannot encrypt a drive known TPM issues
description: Provides guidance for troubleshooting known issues that may prevent BitLocker Drive Encryption from encrypting a drive, and that you can attribute to the TPM
ms.reviewer: kaushika
ms.technology: windows
@ -16,7 +16,6 @@ ms.date: 10/18/2019
ms.custom: bitlocker
---
# BitLocker cannot encrypt a drive: known TPM issues
This article describes common issues that affect the Trusted Platform Module (TPM) and that may prevent BitLocker from encrypting a drive. This article also provides guidance to address these issues.
@ -38,8 +37,10 @@ To resolve this issue, follow these steps:
1. Open an elevated PowerShell window and run the following script:
```ps
$Tpm = Get-WmiObject -class Win32_Tpm -namespace "root\CIMv2\Security\MicrosoftTpm" $ConfirmationStatus = $Tpm.GetPhysicalPresenceConfirmationStatus(22).ConfirmationStatus if($ConfirmationStatus -ne 4) {$Tpm.SetPhysicalPresenceRequest(22)}
```powershell
$Tpm = Get-WmiObject -class Win32_Tpm -namespace "root\CIMv2\Security\MicrosoftTpm"
$ConfirmationStatus = $Tpm.GetPhysicalPresenceConfirmationStatus(22).ConfirmationStatus
if($ConfirmationStatus -ne 4) {$Tpm.SetPhysicalPresenceRequest(22)}
```
1. Restart the computer. If you are prompted at the restart screen, press F12 to agree.
@ -67,7 +68,7 @@ To resolve this issue, disable and re-enable the TPM. To do this, follow these s
If you still cannot prepare the TPM, clear the existing TPM keys. To do this, follow the instructions in [Troubleshoot the TPM: Clear all the keys from the TPM](https://docs.microsoft.com/windows/security/information-protection/tpm/initialize-and-configure-ownership-of-the-tpm#clear-all-the-keys-from-the-tpm).
> [!WARNING]
> Clearing the TPM can cause data loss.
> Clearing the TPM can cause data loss.
## Access Denied: Failed to backup TPM Owner Authorization information to Active Directory Domain Services. Errorcode: 0x80070005
@ -79,7 +80,7 @@ The TPM did not have sufficient permissions on the TPM Devices container in Acti
This issue appears to be limited to computers that run versions of Windows that are earlier than Windows 10.
### Resolution
### Resolution
To verify that you have correctly identified this issue, use one of the following methods:
@ -88,7 +89,7 @@ To verify that you have correctly identified this issue, use one of the followin
1. To review the TPM information for the affected computer, open an elevated Windows PowerShell window and run the following command:
```ps
```powershell
Get-ADComputer -Filter {Name -like "ComputerName"} -Property * | Format-Table name,msTPM-TPMInformationForComputer
```
@ -98,7 +99,7 @@ To verify that you have correctly identified this issue, use one of the followin
## Cannot prepare the TPM, error 0x80072030: "There is no such object on the server"
Your domain controllers were upgraded from Windows Server 2008 R2to Windows Server 2012 R2. A Group Policy Object (GPO) enforces the **Do not enable BitLocker until recovery information is stored in AD DS** policy.
Your domain controllers were upgraded from Windows Server 2008 R2to Windows Server 2012 R2. A Group Policy Object (GPO) enforces the **Do not enable BitLocker until recovery information is stored in AD DS** policy.
You cannot turn on BitLocker Drive Encryption on a device. You use the TPM management console (tpm.msc) to prepare the TPM on a device. The operation fails and you see a message that resembles the following:
@ -115,14 +116,14 @@ The domain and forest functional level of the environment may still be set to Wi
To resolve this issue, follow these steps:
1. Upgrade the functional level of the domain and forest to Windows Server 2012 R2.
1. Download [Add-TPMSelfWriteACE.vbs](https://go.microsoft.com/fwlink/p/?LinkId=167133).
1. In the script, modify the value of **strPathToDomain** to your domain name.
1. Open an elevated PowerShell window, and run the following command:
2. Download [Add-TPMSelfWriteACE.vbs](https://go.microsoft.com/fwlink/p/?LinkId=167133).
3. In the script, modify the value of **strPathToDomain** to your domain name.
4. Open an elevated PowerShell window, and run the following command:
```ps
```powershell
cscript <Path>Add-TPMSelfWriteACE.vbs
```
In this command \<*Path*> is the path to the script file.
For more information, see the following articles:

2
windows/security/information-protection/index.md
View File

@ -1,6 +1,6 @@
---
title: Information protection (Windows 10)
description: Learn more about how to protect sesnsitive data across your ogranization.
description: Learn more about how to protect sensitive data across your organization.
ms.prod: w10
ms.mktglfcycl: deploy
ms.sitesec: library

12
windows/security/information-protection/kernel-dma-protection-for-thunderbolt.md
View File

@ -5,7 +5,7 @@ ms.prod: w10
ms.mktglfcycl: deploy
ms.sitesec: library
ms.pagetype: security
author: dulcemontemayor
author: dansimp
ms.author: dansimp
manager: dansimp
audience: ITPro
@ -82,20 +82,24 @@ Beginning with Windows 10 version 1809, you can use Security Center to check if
### Using System information
1. Launch MSINFO32.exe in a command prompt, or in the Windows search bar.
2. Check the value of **Kernel DMA Protection**.
![Kernel DMA protection in System Information](bitlocker/images/kernel-dma-protection.png)
3. If the current state of **Kernel DMA Protection** is OFF and **Hyper-V - Virtualization Enabled in Firmware** is NO:
- Reboot into BIOS settings
- Turn on Intel Virtualization Technology.
- Turn on Intel Virtualization Technology for I/O (VT-d). In Windows 10 version 1803, only Intel VT-d is supported. Other platforms can use DMA attack mitigations described in [BitLocker countermeasures](bitlocker/bitlocker-countermeasures.md).
- Reboot system into Windows 10.
>[!NOTE]
> **Hyper-V - Virtualization Enabled in Firmware** is NOT shown when **A hypervisor has been detected. Features required for Hyper-V will not be displayed.** is shown because this means that **Hyper-V - Virtualization Enabled in Firmware** is YES.
>[!NOTE]
> **Hyper-V - Virtualization Enabled in Firmware** is not available when **A hypervisor has been detected. Features required for Hyper-V will not be displayed.** is displayed. This means that **Hyper-V - Virtualization Enabled in Firmware** is set to Yes and the **Hyper-V** Windows feature is enabled. Enabling Hyper-V virtualization in Firmware (IOMMU) is required to enable **Kernel DMA Protection**, even when the firmware has the flag of "ACPI Kernel DMA Protection Indicators" described in [Kernel DMA Protection (Memory Access Protection) for OEMs](https://docs.microsoft.com/windows-hardware/design/device-experiences/oem-kernel-dma-protection).
4. If the state of **Kernel DMA Protection** remains Off, then the system does not support this feature.
For systems that do not support Kernel DMA Protection, please refer to the [BitLocker countermeasures](bitlocker/bitlocker-countermeasures.md) or [Thunderbolt™ 3 and Security on Microsoft Windows® 10 Operating system](https://thunderbolttechnology.net/security/Thunderbolt%203%20and%20Security.pdf) for other means of DMA protection.
For systems that do not support Kernel DMA Protection, please refer to the [BitLocker countermeasures](bitlocker/bitlocker-countermeasures.md) or [Thunderbolt™ 3 and Security on Microsoft Windows® 10 Operating system](https://thunderbolttechnology.net/security/Thunderbolt%203%20and%20Security.pdf) for other means of DMA protection.
## Frequently asked questions

4
windows/security/information-protection/secure-the-windows-10-boot-process.md
View File

@ -7,7 +7,7 @@ ms.mktglfcycl: Explore
ms.pagetype: security
ms.sitesec: library
ms.localizationpriority: medium
author: dulcemontemayor
author: dansimp
manager: dansimp
audience: ITPro
ms.collection: M365-security-compliance
@ -84,7 +84,7 @@ These requirements help protect you from rootkits while allowing you to run any
- **Configure UEFI to trust your custom bootloader.** All Certified For Windows 10 PCs allow you to trust a non-certified bootloader by adding a signature to the UEFI database, allowing you to run any operating system, including homemade operating systems.
- **Turn off Secure Boot.** All Certified For Windows 10 PCs allow you to turn off Secure Boot so that you can run any software. This does not help protect you from bootkits, however.
To prevent malware from abusing these options, the user must manually configure the UEFI firmware to trust a non-certified bootloader or to turn off Secure Boot. Software cannot change the Secure Boot settings. For more information about Secure Boot, read the blog, [Protecting the pre-OS environment with UEFI](https://blogs.msdn.com/b/b8/archive/2011/09/22/protecting-the-pre-os-environment-with-uefi.aspx).
To prevent malware from abusing these options, the user must manually configure the UEFI firmware to trust a non-certified bootloader or to turn off Secure Boot. Software cannot change the Secure Boot settings.
Like most mobile devices, ARM-based Certified For Windows RT devices, such as the Microsoft Surface RT device, are designed to run only Windows 8.1. Therefore, Secure Boot cannot be turned off, and you cannot load a different operating system. Fortunately, there is a large market of ARM devices designed to run other operating systems.

2
windows/security/information-protection/tpm/backup-tpm-recovery-information-to-ad-ds.md
View File

@ -7,7 +7,7 @@ ms.prod: w10
ms.mktglfcycl: deploy
ms.sitesec: library
ms.pagetype: security
author: dulcemontemayor
author: dansimp
ms.author: dansimp
manager: dansimp
audience: ITPro

2
windows/security/information-protection/tpm/change-the-tpm-owner-password.md
View File

@ -7,7 +7,7 @@ ms.prod: w10
ms.mktglfcycl: deploy
ms.sitesec: library
ms.pagetype: security
author: dulcemontemayor
author: dansimp
ms.author: dansimp
manager: dansimp
audience: ITPro

2
windows/security/information-protection/tpm/how-windows-uses-the-tpm.md
View File

@ -8,7 +8,7 @@ ms.mktglfcycl: deploy
ms.sitesec: library
ms.pagetype: security
ms.localizationpriority: medium
author: dulcemontemayor
author: dansimp
ms.author: dansimp
manager: dansimp
audience: ITPro

2
windows/security/information-protection/tpm/initialize-and-configure-ownership-of-the-tpm.md
View File

@ -7,7 +7,7 @@ ms.prod: w10
ms.mktglfcycl: deploy
ms.sitesec: library
ms.pagetype: security
author: dulcemontemayor
author: dansimp
ms.author: dansimp
manager: dansimp
audience: ITPro

2
windows/security/information-protection/tpm/switch-pcr-banks-on-tpm-2-0-devices.md
View File

@ -7,7 +7,7 @@ ms.prod: w10
ms.mktglfcycl: deploy
ms.sitesec: library
ms.pagetype: security
author: dulcemontemayor
author: dansimp
ms.author: dansimp
manager: dansimp
audience: ITPro

6
windows/security/information-protection/tpm/tpm-fundamentals.md
View File

@ -7,7 +7,7 @@ ms.prod: w10
ms.mktglfcycl: deploy
ms.sitesec: library
ms.pagetype: security
author: dulcemontemayor
author: dansimp
ms.author: dansimp
manager: dansimp
audience: ITPro
@ -151,5 +151,5 @@ The Windows TPM-based smart card, which is a virtual smart card, can be configur
- [Trusted Platform Module](trusted-platform-module-top-node.md) (list of topics)
- [TPM Cmdlets in Windows PowerShell](https://docs.microsoft.com/powershell/module/trustedplatformmodule/)
- [TPM WMI providers](https://msdn.microsoft.com/library/aa376476.aspx)
- [Prepare your organization for BitLocker: Planning and Policies - TPM configurations](https://technet.microsoft.com/itpro/windows/keep-secure/prepare-your-organization-for-bitlocker-planning-and-policies#bkmk-tpmconfigurations)
- [TPM WMI providers](https://docs.microsoft.com/windows/win32/secprov/security-wmi-providers-reference)
- [Prepare your organization for BitLocker: Planning and Policies - TPM configurations](https://docs.microsoft.com/windows/security/information-protection/bitlocker/prepare-your-organization-for-bitlocker-planning-and-policies#tpm-hardware-configurations)

2
windows/security/information-protection/tpm/tpm-recommendations.md
View File

@ -8,7 +8,7 @@ ms.mktglfcycl: deploy
ms.sitesec: library
ms.pagetype: security
ms.localizationpriority: medium
author: dulcemontemayor
author: dansimp
ms.author: dansimp
manager: dansimp
audience: ITPro

2
windows/security/information-protection/tpm/trusted-platform-module-overview.md
View File

@ -8,7 +8,7 @@ ms.mktglfcycl: deploy
ms.sitesec: library
ms.pagetype: security
ms.localizationpriority: medium
author: dulcemontemayor
author: dansimp
ms.author: dansimp
manager: dansimp
audience: ITPro

2
windows/security/information-protection/tpm/trusted-platform-module-services-group-policy-settings.md
View File

@ -7,7 +7,7 @@ ms.prod: w10
ms.mktglfcycl: deploy
ms.sitesec: library
ms.pagetype: security
author: dulcemontemayor
author: dansimp
ms.author: dansimp
manager: dansimp
audience: ITPro

2
windows/security/information-protection/tpm/trusted-platform-module-top-node.md
View File

@ -6,7 +6,7 @@ ms.mktglfcycl: deploy
ms.sitesec: library
ms.pagetype: security
ms.localizationpriority: medium
author: dulcemontemayor
author: dansimp
ms.author: dansimp
manager: dansimp
audience: ITPro

2
windows/security/information-protection/windows-information-protection/app-behavior-with-wip.md
View File

@ -7,7 +7,7 @@ ms.mktglfcycl: explore
ms.sitesec: library
ms.pagetype: security
ms.localizationpriority: medium
author: dulcemontemayor
author: dansimp
ms.author: dansimp
manager: dansimp
audience: ITPro

2
windows/security/information-protection/windows-information-protection/collect-wip-audit-event-logs.md
View File

@ -6,7 +6,7 @@ ms.mktglfcycl: explore
ms.sitesec: library
ms.pagetype: security
ms.localizationpriority: medium
author: dulcemontemayor
author: dansimp
ms.author: dansimp
manager: dansimp
audience: ITPro

2
windows/security/information-protection/windows-information-protection/create-and-verify-an-efs-dra-certificate.md
View File

@ -7,7 +7,7 @@ ms.mktglfcycl: explore
ms.sitesec: library
ms.pagetype: security
ms.localizationpriority: medium
author: dulcemontemayor
author: dansimp
ms.author: dansimp
manager: dansimp
audience: ITPro

2
windows/security/information-protection/windows-information-protection/create-vpn-and-wip-policy-using-intune-azure.md
View File

@ -7,7 +7,7 @@ ms.mktglfcycl: explore
ms.sitesec: library
ms.pagetype: security
ms.localizationpriority: medium
author: dulcemontemayor
author: dansimp
ms.author: dansimp
manager: dansimp
audience: ITPro

4
windows/security/information-protection/windows-information-protection/create-wip-policy-using-configmgr.md
View File

@ -1,5 +1,5 @@
---
title: Create and deploy a Windows Information Protection (WIP) policy using Microsoft Endpoint Configuration Manager (Windows 10)
title: Create and deploy a Windows Information Protection (WIP) policy using Microsoft Endpoint Manager (Windows 10)
description: Use Configuration Manager to make & deploy a Windows Information Protection (WIP) policy. Choose protected apps, WIP-protection level, and find enterprise data.
ms.assetid: 85b99c20-1319-4aa3-8635-c1a87b244529
ms.reviewer:
@ -9,7 +9,7 @@ ms.mktglfcycl: explore
ms.sitesec: library
ms.pagetype: security
ms.localizationpriority: medium
author: dulcemontemayor
author: dansimp
ms.author: dansimp
manager: dansimp
audience: ITPro

12
windows/security/information-protection/windows-information-protection/create-wip-policy-using-intune-azure.md
View File

@ -1,11 +1,11 @@
---
title: Create a Windows Information Protection (WIP) policy with MDM using the Azure portal for Microsoft Intune (Windows 10)
description: Learn how to use the Azure portal for Microsoft Intune to create and deploy your Windows Information Protection (WIP) policy to protect data on your network.
description: Learn how to use the Azure portal for Microsoft Intune to create and deploy your Windows Information Protection (WIP) policy to protect data on your network.
ms.prod: w10
ms.mktglfcycl: explore
ms.sitesec: library
ms.pagetype: security
author: dulcemontemayor
author: dansimp
ms.author: dansimp
manager: dansimp
audience: ITPro
@ -444,7 +444,7 @@ To stop Windows from automatically blocking these connections, you can add the `
For example:
```console
URL <,proxy>|URL <,proxy>/*AppCompat*/
URL <,proxy>|URL <,proxy>|/*AppCompat*/
```
When you use this string, we recommend that you also turn on [Azure Active Directory Conditional Access](https://docs.microsoft.com/azure/active-directory/active-directory-conditional-access), using the **Domain joined or marked as compliant** option, which blocks apps from accessing any enterprise cloud resources that are protected by conditional access.
@ -458,7 +458,7 @@ contoso.sharepoint.com,contoso.internalproxy1.com|contoso.visualstudio.com,conto
Value format without proxy:
```console
contoso.sharepoint.com,|contoso.visualstudio.com,|contoso.onedrive.com
contoso.sharepoint.com,|contoso.visualstudio.com,|contoso.onedrive.com,
```
### Protected domains
@ -593,7 +593,7 @@ After you've decided where your protected apps can access enterprise data on you
**Use Azure RMS for WIP.** Determines whether WIP uses [Microsoft Azure Rights Management](https://products.office.com/business/microsoft-azure-rights-management) to apply EFS encryption to files that are copied from Windows 10 to USB or other removable drives so they can be securely shared amongst employees. In other words, WIP uses Azure Rights Management "machinery" to apply EFS encryption to files when they are copied to removable drives. You must already have Azure Rights Management set up. The EFS file encryption key is protected by the RMS template’s license. Only users with permission to that template will be able to read it from the removable drive. WIP can also integrate with Azure RMS by using the **AllowAzureRMSForEDP** and the **RMSTemplateIDForEDP** MDM settings in the [EnterpriseDataProtection CSP](https://msdn.microsoft.com/windows/hardware/commercialize/customize/mdm/enterprisedataprotection-csp).
- **On.** Protects files that are copied to a removable drive. You can enter a TemplateID GUID to specify who can access the Azure Rights Management protected files, and for how long. The RMS template is only applied to the files on removable media, and is only used for access control—it doesn’t actually apply Azure Information Protection to the files. Curly braces {} are required around the RMS Template ID, but they are removed after you save the policy.
- **On.** Protects files that are copied to a removable drive. You can enter a TemplateID GUID to specify who can access the Azure Rights Management protected files, and for how long. The RMS template is only applied to the files on removable media, and is only used for access control—it doesn’t actually apply Azure Information Protection to the files.
If you don’t specify an [RMS template](https://docs.microsoft.com/information-protection/deploy-use/configure-custom-templates), it’s a regular EFS file using a default RMS template that all users can access.
@ -622,7 +622,7 @@ You can restrict which files are protected by WIP when they are downloaded from
- [What is Azure Rights Management?](https://docs.microsoft.com/information-protection/understand-explore/what-is-azure-rms)
- [Create and deploy Windows Information Protection (WIP) app protection policy with Intune and MAM](https://docs.microsoft.com/intune/deploy-use/create-windows-information-protection-policy-with-intune)
- [Create a Windows Information Protection (WIP) protection policy using Microsoft Intune](https://docs.microsoft.com/windows/security/information-protection/windows-information-protection/overview-create-wip-policy)
- [Intune MAM Without Enrollment](https://blogs.technet.microsoft.com/configmgrdogs/2016/02/04/intune-mam-without-enrollment/)

2
windows/security/information-protection/windows-information-protection/deploy-wip-policy-using-intune-azure.md
View File

@ -7,7 +7,7 @@ ms.mktglfcycl: explore
ms.sitesec: library
ms.pagetype: security
ms.localizationpriority: medium
author: dulcemontemayor
author: dansimp
ms.author: dansimp
manager: dansimp
audience: ITPro

5
windows/security/information-protection/windows-information-protection/enlightened-microsoft-apps-and-wip.md
View File

@ -9,7 +9,7 @@ ms.mktglfcycl: explore
ms.sitesec: library
ms.pagetype: security
ms.localizationpriority: medium
author: dulcemontemayor
author: dansimp
ms.author: dansimp
manager: dansimp
audience: ITPro
@ -73,6 +73,8 @@ Microsoft has made a concerted effort to enlighten several of our more popular a
- Microsoft Remote Desktop
- Microsoft To Do
> [!NOTE]
> Microsoft Visio, Microsoft Office Access, Microsoft Project, and Microsoft Publisher are not enlightened apps and need to be exempted from WIP policy. If they are allowed, there is a risk of data loss. For example, if a device is workplace-joined and managed and the user leaves the company, metadata files that the apps rely on remain encrypted and the apps stop functioning.
@ -113,6 +115,7 @@ You can add any or all of the enlightened Microsoft apps to your allowed apps li
| Microsoft Paint | **Publisher:** `O=Microsoft Corporation, L=Redmond, S=Washington, C=US`<br>**Binary Name:** mspaint.exe<br>**App Type:** Desktop app |
| Microsoft Remote Desktop | **Publisher:** `O=Microsoft Corporation, L=Redmond, S=Washington, C=US`<br>**Binary Name:** mstsc.exe<br>**App Type:** Desktop app |
| Microsoft MAPI Repair Tool | **Publisher:** `O=Microsoft Corporation, L=Redmond, S=Washington, C=US`<br>**Binary Name:** fixmapi.exe<br>**App Type:** Desktop app |
| Microsoft To Do | **Publisher:** `O=Microsoft Corporation, L=Redmond, S=Washington, C=US`<br>**Product Name:** Microsoft.Todos<br>**App Type:** Store app |
>[!NOTE]
>Help to make this topic better by providing us with edits, additions, and feedback. For info about how to contribute to this topic, see [Editing Windows IT professional documentation](https://github.com/Microsoft/windows-itpro-docs/blob/master/CONTRIBUTING.md).

2
windows/security/information-protection/windows-information-protection/guidance-and-best-practices-wip.md
View File

@ -9,7 +9,7 @@ ms.mktglfcycl: explore
ms.sitesec: library
ms.pagetype: security
ms.localizationpriority: medium
author: dulcemontemayor
author: dansimp
ms.author: dansimp
manager: dansimp
audience: ITPro

4
windows/security/information-protection/windows-information-protection/mandatory-settings-for-wip.md
View File

@ -7,7 +7,7 @@ ms.mktglfcycl: explore
ms.sitesec: library
ms.pagetype: security
ms.localizationpriority: medium
author: dulcemontemayor
author: dansimp
ms.author: dansimp
manager: dansimp
audience: ITPro
@ -28,7 +28,7 @@ This list provides all of the tasks and settings that are required for the opera
|Task|Description|
|----|-----------|
|Add at least one app to the **Protected apps** list in your WIP policy.|You must have at least one app added to your **Protected apps** list. For more info about where this area is and how to add apps, see the **Add apps to your Protected apps list** section of the policy creation topics.|
|Choose your WIP protection level.|You must choose the level of protection you want to apply to your WIP-protected content, including **Allow Overrides**, **Silent**, or **Block**. For more info about where this area is and how to decide on your protection level, see the **Manage the WIP protection mode for your enterprise data** section of the policy creation topics. For info about how to collect your audit log files, see [How to collect Windows Information Protection (WIP) audit event logs](collect-wip-audit-event-logs.md).|
|Choose your WIP protection level.|You must choose the level of protection you want to apply to your WIP-protected content, including **Allow Overrides**, **Silent**, or **Block**. For more info about where this area is and how to decide on your protection level, see the [Manage the WIP protection mode for your enterprise data](https://docs.microsoft.com/windows/security/information-protection/windows-information-protection/create-wip-policy-using-configmgr#manage-the-wip-protection-level-for-your-enterprise-data) section of the policy creation topics. For info about how to collect your audit log files, see [How to collect Windows Information Protection (WIP) audit event logs](collect-wip-audit-event-logs.md).|
|Specify your corporate identity.|This field is automatically filled out for you by Microsoft Intune. However, you must manually correct it if it’s incorrect or if you need to add additional domains. For more info about where this area is and what it means, see the **Define your enterprise-managed corporate identity** section of the policy creation topics.
|Specify your network domain names.|Starting with Windows 10, version 1703, this field is optional.<br><br>Specify the DNS suffixes used in your environment. All traffic to the fully-qualified domains appearing in this list will be protected. For more info about where this area is and how to add your suffixes, see the table that appears in the **Choose where apps can access enterprise data** section of the policy creation topics.|
|Specify your enterprise IPv4 or IPv6 ranges.|Starting with Windows 10, version 1703, this field is optional.<br><br>Specify the addresses for a valid IPv4 or IPv6 value range within your intranet. These addresses, used with your Network domain names, define your corporate network boundaries. For more info about where this area is and what it means, see the table that appears in the **Define your enterprise-managed corporate identity** section of the policy creation topics.|

10
windows/security/information-protection/windows-information-protection/overview-create-wip-policy-configmgr.md
View File

@ -1,6 +1,6 @@
---
title: Create a Windows Information Protection (WIP) policy using Microsoft Endpoint Configuration Manager (Windows 10)
description: Microsoft Endpoint Configuration Manager helps you create and deploy your enterprise data protection (WIP) policy, including letting you choose your protected apps, your WIP-protection level, and how to find enterprise data on the network.
title: Create a Windows Information Protection (WIP) policy using Microsoft Endpoint Manager (Windows 10)
description: Microsoft Endpoint Manager helps you create and deploy your enterprise data protection (WIP) policy, including letting you choose your protected apps, your WIP-protection level, and how to find enterprise data on the network.
ms.assetid: d2059e74-94bd-4e54-ab59-1a7b9b52bdc6
ms.reviewer:
ms.prod: w10
@ -8,7 +8,7 @@ ms.mktglfcycl: explore
ms.sitesec: library
ms.pagetype: security
ms.localizationpriority: medium
author: dulcemontemayor
author: dansimp
ms.author: dansimp
manager: dansimp
audience: ITPro
@ -23,11 +23,11 @@ ms.date: 02/26/2019
- Windows 10, version 1607 and later
- Windows 10 Mobile, version 1607 and later
Microsoft Endpoint Configuration Manager helps you create and deploy your enterprise data protection (WIP) policy, including letting you choose your protected apps, your WIP-protection level, and how to find enterprise data on the network.
Microsoft Endpoint Manager helps you create and deploy your enterprise data protection (WIP) policy, including letting you choose your protected apps, your WIP-protection level, and how to find enterprise data on the network.
## In this section
|Topic |Description |
|------|------------|
|[Create and deploy a Windows Information Protection (WIP) policy using Microsoft Endpoint Configuration Manager](create-wip-policy-using-configmgr.md) |Microsoft Endpoint Configuration Manager helps you create and deploy your WIP policy, including letting you choose your protected apps, your WIP-protection level, and how to find enterprise data on the network. |
|[Create and deploy a Windows Information Protection (WIP) policy using Microsoft Endpoint Configuration Manager](create-wip-policy-using-configmgr.md) |Microsoft Endpoint Manager helps you create and deploy your WIP policy, including letting you choose your protected apps, your WIP-protection level, and how to find enterprise data on the network. |
|[Create and verify an Encrypting File System (EFS) Data Recovery Agent (DRA) certificate](create-and-verify-an-efs-dra-certificate.md) |Steps to create, verify, and perform a quick recovery using a Encrypting File System (EFS) Data Recovery Agent (DRA) certificate. |
|[Determine the Enterprise Context of an app running in Windows Information Protection (WIP)](wip-app-enterprise-context.md) |Use the Task Manager to determine whether an app is considered work, personal or exempt by Windows Information Protection (WIP). |

4
windows/security/information-protection/windows-information-protection/overview-create-wip-policy.md
View File

@ -1,6 +1,6 @@
---
title: Create a Windows Information Protection (WIP) policy using Microsoft Intune (Windows 10)
description: Microsoft Intune and Microsoft Endpoint Configuration Manager helps you create and deploy your enterprise data protection (WIP) policy.
description: Microsoft Intune and Microsoft Endpoint Manager helps you create and deploy your enterprise data protection (WIP) policy.
ms.assetid: d2059e74-94bd-4e54-ab59-1a7b9b52bdc6
ms.reviewer:
ms.prod: w10
@ -8,7 +8,7 @@ ms.mktglfcycl: explore
ms.sitesec: library
ms.pagetype: security
ms.localizationpriority: medium
author: dulcemontemayor
author: dansimp
ms.author: dansimp
manager: dansimp
audience: ITPro

8
windows/security/information-protection/windows-information-protection/protect-enterprise-data-using-wip.md
View File

@ -9,7 +9,7 @@ ms.mktglfcycl: explore
ms.sitesec: library
ms.pagetype: security
ms.localizationpriority: medium
author: dulcemontemayor
author: dansimp
ms.author: dansimp
manager: dansimp
audience: ITPro
@ -59,7 +59,7 @@ To help address this security insufficiency, companies developed data loss preve
- **The ability to specify what happens when data matches a rule, including whether employees can bypass enforcement.** For example, in Microsoft SharePoint and SharePoint Online, the Microsoft data loss prevention system lets you warn your employees that shared data includes sensitive info, and to share it anyway (with an optional audit log entry).
Unfortunately, data loss prevention systems have their own problems. For example, the more detailed the rule set, the more false positives are created, leading employees to believe that the rules slow down their work and need to be bypassed in order to remain productive, potentially leading to data being incorrectly blocked or improperly released. Another major problem is that data loss prevention systems must be widely implemented to be effective. For example, if your company uses a data loss prevention system for email, but not for file shares or document storage, you might find that your data leaks through the unprotected channels. But perhaps the biggest problem with data loss prevention systems is that it provides a jarring experience that interrupts the employees’ natural workflow by stopping some operations (such as sending a message with an attachment that the system tags as sensitive) while allowing others, often according to subtle rules that the employee doesn’t see and can’t understand.
Unfortunately, data loss prevention systems have their own problems. For example, the less detailed the rule set, the more false positives are created, leading employees to believe that the rules slow down their work and need to be bypassed in order to remain productive, potentially leading to data being incorrectly blocked or improperly released. Another major problem is that data loss prevention systems must be widely implemented to be effective. For example, if your company uses a data loss prevention system for email, but not for file shares or document storage, you might find that your data leaks through the unprotected channels. But perhaps the biggest problem with data loss prevention systems is that it provides a jarring experience that interrupts the employees’ natural workflow by stopping some operations (such as sending a message with an attachment that the system tags as sensitive) while allowing others, often according to subtle rules that the employee doesn’t see and can’t understand.
### Using information rights management systems
To help address the potential data loss prevention system problems, companies developed information rights management (also known as IRM) systems. Information rights management systems embed protection directly into documents, so that when an employee creates a document, he or she determines what kind of protection to apply. For example, an employee can choose to stop the document from being forwarded, printed, shared outside of the organization, and so on.
@ -90,7 +90,7 @@ WIP is the mobile application management (MAM) mechanism on Windows 10. WIP give
- **Copying or downloading enterprise data.** When an employee or an app downloads content from a location like SharePoint, a network share, or an enterprise web location, while using a WIP-protected device, WIP encrypts the data on the device.
- **Using protected apps.** Managed apps (apps that you've included on the **Protected apps** list in your WIP policy) are allowed to access your enterprise data and will interact differently when used with unallowed, non-enterprise aware, or personal-only apps. For example, if WIP management is set to **Block**, your employees can copy and paste from one protected app to another protected app, but not to personal apps. Imagine an HR person wants to copy a job description from a protected app to the internal career website, an enterprise-protected location, but goofs and tries to paste into a personal app instead. The paste action fails and a notification pops up, saying that the app couldn’t paste because of a policy restriction. The HR person then correctly pastes to the career website without a problem.
- **Using protected apps.** Managed apps (apps that you've included on the **Protected apps** list in your WIP policy) are allowed to access your enterprise data and will interact differently when used with unallowed, non-enterprise aware, or personal-only apps. For example, if WIP management is set to **Block**, your employees can copy and paste from one protected app to another protected app, but not to personal apps. Imagine an HR person wants to copy a job description from a protected app to the internal career website, an enterprise-protected location, but makes a mistake and tries to paste into a personal app instead. The paste action fails and a notification pops up, saying that the app couldn’t paste because of a policy restriction. The HR person then correctly pastes to the career website without a problem.
- **Managed apps and restrictions.** With WIP you can control which apps can access and use your enterprise data. After adding an app to your protected apps list, the app is trusted with enterprise data. All apps not on this list are stopped from accessing your enterprise data, depending on your WIP management-mode.
@ -110,7 +110,7 @@ WIP is the mobile application management (MAM) mechanism on Windows 10. WIP give
- **Remove access to enterprise data from enterprise-protected devices.** WIP gives admins the ability to revoke enterprise data from one or many MDM-enrolled devices, while leaving personal data alone. This is a benefit when an employee leaves your company, or in the case of a stolen device. After determining that the data access needs to be removed, you can use Microsoft Intune to unenroll the device so when it connects to the network, the user's encryption key for the device is revoked and the enterprise data becomes unreadable.
>[!NOTE]
>For management of Surface devices it is recommended that you use the Current Branch of Microsoft Endpoint Configuration Manager.<br>Microsoft Endpoint Configuration Manager also allows you to revoke enterprise data. However, it does it by performing a factory reset of the device.
>For management of Surface devices it is recommended that you use the Current Branch of Microsoft Endpoint Configuration Manager.<br>Microsoft Endpoint Manager also allows you to revoke enterprise data. However, it does it by performing a factory reset of the device.
## How WIP works
WIP helps address your everyday challenges in the enterprise. Including:

2
windows/security/information-protection/windows-information-protection/recommended-network-definitions-for-wip.md
View File

@ -7,7 +7,7 @@ ms.mktglfcycl: explore
ms.sitesec: library
ms.pagetype: security
ms.localizationpriority: medium
author: dulcemontemayor
author: dansimp
ms.author: dansimp
manager: dansimp
audience: ITPro

2
windows/security/information-protection/windows-information-protection/testing-scenarios-for-wip.md
View File

@ -9,7 +9,7 @@ ms.mktglfcycl: explore
ms.sitesec: library
ms.pagetype: security
ms.localizationpriority: medium
author: dulcemontemayor
author: dansimp
ms.author: dansimp
manager: dansimp
audience: ITPro

2
windows/security/information-protection/windows-information-protection/using-owa-with-wip.md
View File

@ -7,7 +7,7 @@ ms.mktglfcycl: explore
ms.sitesec: library
ms.pagetype: security
ms.localizationpriority: medium
author: dulcemontemayor
author: dansimp
ms.author: dansimp
manager: dansimp
audience: ITPro

2
windows/security/information-protection/windows-information-protection/wip-app-enterprise-context.md
View File

@ -7,7 +7,7 @@ ms.mktglfcycl: explore
ms.sitesec: library
ms.pagetype: security
ms.localizationpriority: medium
author: dulcemontemayor
author: dansimp
ms.author: dansimp
manager: dansimp
audience: ITPro