diff --git a/LICENSE b/LICENSE new file mode 100644 index 0000000000..a2c95fc155 --- /dev/null +++ b/LICENSE @@ -0,0 +1,395 @@ +Attribution 4.0 International + +======================================================================= + +Creative Commons Corporation ("Creative Commons") is not a law firm and +does not provide legal services or legal advice. Distribution of +Creative Commons public licenses does not create a lawyer-client or +other relationship. Creative Commons makes its licenses and related +information available on an "as-is" basis. Creative Commons gives no +warranties regarding its licenses, any material licensed under their +terms and conditions, or any related information. Creative Commons +disclaims all liability for damages resulting from their use to the +fullest extent possible. + +Using Creative Commons Public Licenses + +Creative Commons public licenses provide a standard set of terms and +conditions that creators and other rights holders may use to share +original works of authorship and other material subject to copyright +and certain other rights specified in the public license below. The +following considerations are for informational purposes only, are not +exhaustive, and do not form part of our licenses. + + Considerations for licensors: Our public licenses are + intended for use by those authorized to give the public + permission to use material in ways otherwise restricted by + copyright and certain other rights. Our licenses are + irrevocable. Licensors should read and understand the terms + and conditions of the license they choose before applying it. + Licensors should also secure all rights necessary before + applying our licenses so that the public can reuse the + material as expected. Licensors should clearly mark any + material not subject to the license. This includes other CC- + licensed material, or material used under an exception or + limitation to copyright. More considerations for licensors: + wiki.creativecommons.org/Considerations_for_licensors + + Considerations for the public: By using one of our public + licenses, a licensor grants the public permission to use the + licensed material under specified terms and conditions. If + the licensor's permission is not necessary for any reason--for + example, because of any applicable exception or limitation to + copyright--then that use is not regulated by the license. Our + licenses grant only permissions under copyright and certain + other rights that a licensor has authority to grant. Use of + the licensed material may still be restricted for other + reasons, including because others have copyright or other + rights in the material. A licensor may make special requests, + such as asking that all changes be marked or described. + Although not required by our licenses, you are encouraged to + respect those requests where reasonable. More_considerations + for the public: + wiki.creativecommons.org/Considerations_for_licensees + +======================================================================= + +Creative Commons Attribution 4.0 International Public License + +By exercising the Licensed Rights (defined below), You accept and agree +to be bound by the terms and conditions of this Creative Commons +Attribution 4.0 International Public License ("Public License"). To the +extent this Public License may be interpreted as a contract, You are +granted the Licensed Rights in consideration of Your acceptance of +these terms and conditions, and the Licensor grants You such rights in +consideration of benefits the Licensor receives from making the +Licensed Material available under these terms and conditions. + + +Section 1 -- Definitions. + + a. Adapted Material means material subject to Copyright and Similar + Rights that is derived from or based upon the Licensed Material + and in which the Licensed Material is translated, altered, + arranged, transformed, or otherwise modified in a manner requiring + permission under the Copyright and Similar Rights held by the + Licensor. For purposes of this Public License, where the Licensed + Material is a musical work, performance, or sound recording, + Adapted Material is always produced where the Licensed Material is + synched in timed relation with a moving image. + + b. Adapter's License means the license You apply to Your Copyright + and Similar Rights in Your contributions to Adapted Material in + accordance with the terms and conditions of this Public License. + + c. Copyright and Similar Rights means copyright and/or similar rights + closely related to copyright including, without limitation, + performance, broadcast, sound recording, and Sui Generis Database + Rights, without regard to how the rights are labeled or + categorized. For purposes of this Public License, the rights + specified in Section 2(b)(1)-(2) are not Copyright and Similar + Rights. + + d. Effective Technological Measures means those measures that, in the + absence of proper authority, may not be circumvented under laws + fulfilling obligations under Article 11 of the WIPO Copyright + Treaty adopted on December 20, 1996, and/or similar international + agreements. + + e. Exceptions and Limitations means fair use, fair dealing, and/or + any other exception or limitation to Copyright and Similar Rights + that applies to Your use of the Licensed Material. + + f. Licensed Material means the artistic or literary work, database, + or other material to which the Licensor applied this Public + License. + + g. Licensed Rights means the rights granted to You subject to the + terms and conditions of this Public License, which are limited to + all Copyright and Similar Rights that apply to Your use of the + Licensed Material and that the Licensor has authority to license. + + h. Licensor means the individual(s) or entity(ies) granting rights + under this Public License. + + i. Share means to provide material to the public by any means or + process that requires permission under the Licensed Rights, such + as reproduction, public display, public performance, distribution, + dissemination, communication, or importation, and to make material + available to the public including in ways that members of the + public may access the material from a place and at a time + individually chosen by them. + + j. Sui Generis Database Rights means rights other than copyright + resulting from Directive 96/9/EC of the European Parliament and of + the Council of 11 March 1996 on the legal protection of databases, + as amended and/or succeeded, as well as other essentially + equivalent rights anywhere in the world. + + k. You means the individual or entity exercising the Licensed Rights + under this Public License. Your has a corresponding meaning. + + +Section 2 -- Scope. + + a. License grant. + + 1. Subject to the terms and conditions of this Public License, + the Licensor hereby grants You a worldwide, royalty-free, + non-sublicensable, non-exclusive, irrevocable license to + exercise the Licensed Rights in the Licensed Material to: + + a. reproduce and Share the Licensed Material, in whole or + in part; and + + b. produce, reproduce, and Share Adapted Material. + + 2. Exceptions and Limitations. For the avoidance of doubt, where + Exceptions and Limitations apply to Your use, this Public + License does not apply, and You do not need to comply with + its terms and conditions. + + 3. Term. The term of this Public License is specified in Section + 6(a). + + 4. Media and formats; technical modifications allowed. The + Licensor authorizes You to exercise the Licensed Rights in + all media and formats whether now known or hereafter created, + and to make technical modifications necessary to do so. The + Licensor waives and/or agrees not to assert any right or + authority to forbid You from making technical modifications + necessary to exercise the Licensed Rights, including + technical modifications necessary to circumvent Effective + Technological Measures. For purposes of this Public License, + simply making modifications authorized by this Section 2(a) + (4) never produces Adapted Material. + + 5. Downstream recipients. + + a. Offer from the Licensor -- Licensed Material. Every + recipient of the Licensed Material automatically + receives an offer from the Licensor to exercise the + Licensed Rights under the terms and conditions of this + Public License. + + b. No downstream restrictions. You may not offer or impose + any additional or different terms or conditions on, or + apply any Effective Technological Measures to, the + Licensed Material if doing so restricts exercise of the + Licensed Rights by any recipient of the Licensed + Material. + + 6. No endorsement. Nothing in this Public License constitutes or + may be construed as permission to assert or imply that You + are, or that Your use of the Licensed Material is, connected + with, or sponsored, endorsed, or granted official status by, + the Licensor or others designated to receive attribution as + provided in Section 3(a)(1)(A)(i). + + b. Other rights. + + 1. Moral rights, such as the right of integrity, are not + licensed under this Public License, nor are publicity, + privacy, and/or other similar personality rights; however, to + the extent possible, the Licensor waives and/or agrees not to + assert any such rights held by the Licensor to the limited + extent necessary to allow You to exercise the Licensed + Rights, but not otherwise. + + 2. Patent and trademark rights are not licensed under this + Public License. + + 3. To the extent possible, the Licensor waives any right to + collect royalties from You for the exercise of the Licensed + Rights, whether directly or through a collecting society + under any voluntary or waivable statutory or compulsory + licensing scheme. In all other cases the Licensor expressly + reserves any right to collect such royalties. + + +Section 3 -- License Conditions. + +Your exercise of the Licensed Rights is expressly made subject to the +following conditions. + + a. Attribution. + + 1. If You Share the Licensed Material (including in modified + form), You must: + + a. retain the following if it is supplied by the Licensor + with the Licensed Material: + + i. identification of the creator(s) of the Licensed + Material and any others designated to receive + attribution, in any reasonable manner requested by + the Licensor (including by pseudonym if + designated); + + ii. a copyright notice; + + iii. a notice that refers to this Public License; + + iv. a notice that refers to the disclaimer of + warranties; + + v. a URI or hyperlink to the Licensed Material to the + extent reasonably practicable; + + b. indicate if You modified the Licensed Material and + retain an indication of any previous modifications; and + + c. indicate the Licensed Material is licensed under this + Public License, and include the text of, or the URI or + hyperlink to, this Public License. + + 2. You may satisfy the conditions in Section 3(a)(1) in any + reasonable manner based on the medium, means, and context in + which You Share the Licensed Material. For example, it may be + reasonable to satisfy the conditions by providing a URI or + hyperlink to a resource that includes the required + information. + + 3. If requested by the Licensor, You must remove any of the + information required by Section 3(a)(1)(A) to the extent + reasonably practicable. + + 4. If You Share Adapted Material You produce, the Adapter's + License You apply must not prevent recipients of the Adapted + Material from complying with this Public License. + + +Section 4 -- Sui Generis Database Rights. + +Where the Licensed Rights include Sui Generis Database Rights that +apply to Your use of the Licensed Material: + + a. for the avoidance of doubt, Section 2(a)(1) grants You the right + to extract, reuse, reproduce, and Share all or a substantial + portion of the contents of the database; + + b. if You include all or a substantial portion of the database + contents in a database in which You have Sui Generis Database + Rights, then the database in which You have Sui Generis Database + Rights (but not its individual contents) is Adapted Material; and + + c. You must comply with the conditions in Section 3(a) if You Share + all or a substantial portion of the contents of the database. + +For the avoidance of doubt, this Section 4 supplements and does not +replace Your obligations under this Public License where the Licensed +Rights include other Copyright and Similar Rights. + + +Section 5 -- Disclaimer of Warranties and Limitation of Liability. + + a. UNLESS OTHERWISE SEPARATELY UNDERTAKEN BY THE LICENSOR, TO THE + EXTENT POSSIBLE, THE LICENSOR OFFERS THE LICENSED MATERIAL AS-IS + AND AS-AVAILABLE, AND MAKES NO REPRESENTATIONS OR WARRANTIES OF + ANY KIND CONCERNING THE LICENSED MATERIAL, WHETHER EXPRESS, + IMPLIED, STATUTORY, OR OTHER. THIS INCLUDES, WITHOUT LIMITATION, + WARRANTIES OF TITLE, MERCHANTABILITY, FITNESS FOR A PARTICULAR + PURPOSE, NON-INFRINGEMENT, ABSENCE OF LATENT OR OTHER DEFECTS, + ACCURACY, OR THE PRESENCE OR ABSENCE OF ERRORS, WHETHER OR NOT + KNOWN OR DISCOVERABLE. WHERE DISCLAIMERS OF WARRANTIES ARE NOT + ALLOWED IN FULL OR IN PART, THIS DISCLAIMER MAY NOT APPLY TO YOU. + + b. TO THE EXTENT POSSIBLE, IN NO EVENT WILL THE LICENSOR BE LIABLE + TO YOU ON ANY LEGAL THEORY (INCLUDING, WITHOUT LIMITATION, + NEGLIGENCE) OR OTHERWISE FOR ANY DIRECT, SPECIAL, INDIRECT, + INCIDENTAL, CONSEQUENTIAL, PUNITIVE, EXEMPLARY, OR OTHER LOSSES, + COSTS, EXPENSES, OR DAMAGES ARISING OUT OF THIS PUBLIC LICENSE OR + USE OF THE LICENSED MATERIAL, EVEN IF THE LICENSOR HAS BEEN + ADVISED OF THE POSSIBILITY OF SUCH LOSSES, COSTS, EXPENSES, OR + DAMAGES. WHERE A LIMITATION OF LIABILITY IS NOT ALLOWED IN FULL OR + IN PART, THIS LIMITATION MAY NOT APPLY TO YOU. + + c. The disclaimer of warranties and limitation of liability provided + above shall be interpreted in a manner that, to the extent + possible, most closely approximates an absolute disclaimer and + waiver of all liability. + + +Section 6 -- Term and Termination. + + a. This Public License applies for the term of the Copyright and + Similar Rights licensed here. However, if You fail to comply with + this Public License, then Your rights under this Public License + terminate automatically. + + b. Where Your right to use the Licensed Material has terminated under + Section 6(a), it reinstates: + + 1. automatically as of the date the violation is cured, provided + it is cured within 30 days of Your discovery of the + violation; or + + 2. upon express reinstatement by the Licensor. + + For the avoidance of doubt, this Section 6(b) does not affect any + right the Licensor may have to seek remedies for Your violations + of this Public License. + + c. For the avoidance of doubt, the Licensor may also offer the + Licensed Material under separate terms or conditions or stop + distributing the Licensed Material at any time; however, doing so + will not terminate this Public License. + + d. Sections 1, 5, 6, 7, and 8 survive termination of this Public + License. + + +Section 7 -- Other Terms and Conditions. + + a. The Licensor shall not be bound by any additional or different + terms or conditions communicated by You unless expressly agreed. + + b. Any arrangements, understandings, or agreements regarding the + Licensed Material not stated herein are separate from and + independent of the terms and conditions of this Public License. + + +Section 8 -- Interpretation. + + a. For the avoidance of doubt, this Public License does not, and + shall not be interpreted to, reduce, limit, restrict, or impose + conditions on any use of the Licensed Material that could lawfully + be made without permission under this Public License. + + b. To the extent possible, if any provision of this Public License is + deemed unenforceable, it shall be automatically reformed to the + minimum extent necessary to make it enforceable. If the provision + cannot be reformed, it shall be severed from this Public License + without affecting the enforceability of the remaining terms and + conditions. + + c. No term or condition of this Public License will be waived and no + failure to comply consented to unless expressly agreed to by the + Licensor. + + d. Nothing in this Public License constitutes or may be interpreted + as a limitation upon, or waiver of, any privileges and immunities + that apply to the Licensor or You, including from the legal + processes of any jurisdiction or authority. + + +======================================================================= + +Creative Commons is not a party to its public +licenses. Notwithstanding, Creative Commons may elect to apply one of +its public licenses to material it publishes and in those instances +will be considered the “Licensor.” The text of the Creative Commons +public licenses is dedicated to the public domain under the CC0 Public +Domain Dedication. Except for the limited purpose of indicating that +material is shared under a Creative Commons public license or as +otherwise permitted by the Creative Commons policies published at +creativecommons.org/policies, Creative Commons does not authorize the +use of the trademark "Creative Commons" or any other trademark or logo +of Creative Commons without its prior written consent including, +without limitation, in connection with any unauthorized modifications +to any of its public licenses or any other arrangements, +understandings, or agreements concerning use of licensed material. For +the avoidance of doubt, this paragraph does not form part of the +public licenses. + +Creative Commons may be contacted at creativecommons.org. \ No newline at end of file diff --git a/LICENSE-CODE b/LICENSE-CODE new file mode 100644 index 0000000000..b17b032a43 --- /dev/null +++ b/LICENSE-CODE @@ -0,0 +1,17 @@ +The MIT License (MIT) +Copyright (c) Microsoft Corporation + +Permission is hereby granted, free of charge, to any person obtaining a copy of this software and +associated documentation files (the "Software"), to deal in the Software without restriction, +including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, +and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, +subject to the following conditions: + +The above copyright notice and this permission notice shall be included in all copies or substantial +portions of the Software. + +THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT +NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. +IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, +WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE +SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. \ No newline at end of file diff --git a/README.md b/README.md index 8864d2a10e..01059ee91d 100644 --- a/README.md +++ b/README.md @@ -1,3 +1,8 @@ +## Microsoft Open Source Code of Conduct + +This project has adopted the [Microsoft Open Source Code of Conduct](https://opensource.microsoft.com/codeofconduct/). +For more information see the [Code of Conduct FAQ](https://opensource.microsoft.com/codeofconduct/faq/) or contact [opencode@microsoft.com](mailto:opencode@microsoft.com) with any additional questions or comments. + # Windows IT professional documentation Welcome! This repository houses the docs that are written for IT professionals for the following products: diff --git a/ThirdPartyNotices b/ThirdPartyNotices new file mode 100644 index 0000000000..a0bd09d68f --- /dev/null +++ b/ThirdPartyNotices @@ -0,0 +1,15 @@ +##Legal Notices +Microsoft and any contributors grant you a license to the Microsoft documentation and other content +in this repository under the [Creative Commons Attribution 4.0 International Public License](https://creativecommons.org/licenses/by/4.0/legalcode), +see the [LICENSE](LICENSE) file, and grant you a license to any code in the repository under the [MIT License](https://opensource.org/licenses/MIT), see the +[LICENSE-CODE](LICENSE-CODE) file. + +Microsoft, Windows, Microsoft Azure and/or other Microsoft products and services referenced in the documentation +may be either trademarks or registered trademarks of Microsoft in the United States and/or other countries. +The licenses for this project do not grant you rights to use any Microsoft names, logos, or trademarks. +Microsoft's general trademark guidelines can be found at http://go.microsoft.com/fwlink/?LinkID=254653. + +Privacy information can be found at https://privacy.microsoft.com/en-us/ + +Microsoft and any contributors reserve all others rights, whether under their respective copyrights, patents, +or trademarks, whether by implication, estoppel or otherwise. \ No newline at end of file diff --git a/license.md b/license.md deleted file mode 100644 index 0e5cb57b99..0000000000 --- a/license.md +++ /dev/null @@ -1,7 +0,0 @@ -Copyright (c) Microsoft Corporation. Distributed under the following terms: - -1. Microsoft and any contributors to this project each grants you a license, under its respective copyrights, to the documentation under the [Creative Commons Attribution 3.0 United States License](http://creativecommons.org/licenses/by/3.0/us/legalcode). In addition, with respect to any sample code contained in the documentation, Microsoft and any such contributors grants you an additional license, under its respective intellectual property rights, to use the code to develop or design your software for Microsoft Windows. - -2. Microsoft, Windows, and/or other Microsoft products and services referenced in the documentation may be either trademarks or registered trademarks of Microsoft in the United States and/or other countries. This license does not grant you rights to use any names, logos, or trademarks. For Microsoft’s general trademark guidelines, go to [https://go.microsoft.com/fwlink/?LinkID=254653](https://go.microsoft.com/fwlink/?LinkID=254653). - -3. Microsoft and any contributors reserves all others rights, whether under copyrights, patents, or trademarks, or by implication, estoppel or otherwise. diff --git a/windows/configure/TOC.md b/windows/configure/TOC.md index de79f737e1..7051cc29db 100644 --- a/windows/configure/TOC.md +++ b/windows/configure/TOC.md @@ -3,28 +3,30 @@ ## [Manage connections from Windows operating system components to Microsoft services](manage-connections-from-windows-operating-system-components-to-microsoft-services.md) ## [Manage Wi-Fi Sense in your company](manage-wifi-sense-in-enterprise.md) ## [Configure kiosk and shared devices running Windows 10 desktop editions](kiosk-shared-pc.md) -### [Set up a shared or guest PC with Windows 10](set-up-a-device-for-anyone-to-use.md) +### [Set up a shared or guest PC with Windows 10](set-up-shared-or-guest-pc.md) ### [Set up a kiosk on Windows 10 Pro, Enterprise, or Education](set-up-a-kiosk-for-windows-10-for-desktop-editions.md) ### [Guidelines for choosing an app for assigned access (kiosk mode)](guidelines-for-assigned-access-app.md) ### [Lock down Windows 10 to specific apps (AppLocker)](lock-down-windows-10-to-specific-apps.md) ## [Configure Windows 10 Mobile devices](configure-mobile.md) ### [Set up a kiosk on Windows 10 Mobile or Windows 10 Mobile Enterprise](set-up-a-kiosk-for-windows-10-for-mobile-edition.md) ### [Use Windows Configuration Designer to configure Windows 10 Mobile devices](provisioning-configure-mobile.md) -### [Use the Lockdown Designer app to configure Windows 10 Mobile devices](mobile-lockdown-designer.md) +#### [NFC-based device provisioning](provisioning-nfc.md) +#### [Barcode provisioning and the package splitter tool](provisioning-package-splitter.md) +### [Use the Lockdown Designer app to create a Lockdown XML file](mobile-lockdown-designer.md) ### [Configure Windows 10 Mobile using Lockdown XML](lockdown-xml.md) ### [Settings and quick actions that can be locked down in Windows 10 Mobile](settings-that-can-be-locked-down.md) ### [Product IDs in Windows 10 Mobile](product-ids-in-windows-10-mobile.md) +### [Start layout XML for mobile editions of Windows 10 (reference)](start-layout-xml-mobile.md) ## [Configure Start, taskbar, and lock screen](start-taskbar-lockscreen.md) -### [Windows Spotlight on the lock screen](windows-spotlight.md) +### [Configure Windows Spotlight on the lock screen](windows-spotlight.md) ### [Manage Windows 10 and Windows Store tips, tricks, and suggestions](manage-tips-and-suggestions.md) ### [Manage Windows 10 Start and taskbar layout](windows-10-start-layout-options-and-policies.md) #### [Configure Windows 10 taskbar](configure-windows-10-taskbar.md) #### [Customize and export Start layout](customize-and-export-start-layout.md) #### [Start layout XML for desktop editions of Windows 10 (reference)](start-layout-xml-desktop.md) -#### [Start layout XML for mobile editions of Windows 10 (reference)](start-layout-xml-mobile.md) #### [Customize Windows 10 Start and taskbar with Group Policy](customize-windows-10-start-screens-by-using-group-policy.md) -#### [Customize Windows 10 Start and taskbar with ICD and provisioning packages](customize-windows-10-start-screens-by-using-provisioning-packages-and-icd.md) -#### [Customize Windows 10 Start with mobile device management (MDM)](customize-windows-10-start-screens-by-using-mobile-device-management.md) +#### [Customize Windows 10 Start and taskbar with provisioning packages](customize-windows-10-start-screens-by-using-provisioning-packages-and-icd.md) +#### [Customize Windows 10 Start and tasbkar with mobile device management (MDM)](customize-windows-10-start-screens-by-using-mobile-device-management.md) #### [Changes to Start policies in Windows 10](changes-to-start-policies-in-windows-10.md) ## [Cortana integration in your business or enterprise](cortana-at-work-overview.md) ### [Testing scenarios using Cortana in your business or organization](cortana-at-work-testing-scenarios.md) @@ -45,14 +47,14 @@ ## [Provisioning packages for Windows 10](provisioning-packages.md) ### [How provisioning works in Windows 10](provisioning-how-it-works.md) ### [Introduction to configuration service providers (CSPs)](how-it-pros-can-use-configuration-service-providers.md) -### [Install Windows Imaging and Configuration Designer](provisioning-install-icd.md) +### [Install Windows Configuration Designer](provisioning-install-icd.md) ### [Create a provisioning package](provisioning-create-package.md) ### [Apply a provisioning package](provisioning-apply-package.md) ### [Settings changed when you uninstall a provisioning package](provisioning-uninstall-package.md) -### [Provision PCs with common settings for initial deployment (simple provisioning)](provision-pcs-for-initial-deployment.md) -### [Provision PCs with apps and certificates for initial deployments (advanced provisioning)](provision-pcs-with-apps-and-certificates.md) +### [Provision PCs with common settings for initial deployment (desktop wizard)](provision-pcs-for-initial-deployment.md) +### [Provision PCs with apps](provision-pcs-with-apps.md) ### [Use a script to install a desktop app in provisioning packages](provisioning-script-to-install-app.md) -### [NFC-based device provisioning](provisioning-nfc.md) +### [PowerShell cmdlets for provisioning Windows 10 (reference)](provisioning-powershell.md) ### [Windows ICD command-line interface (reference)](provisioning-command-line.md) ### [Create a provisioning package with multivariant settings](provisioning-multivariant.md) ## [Lockdown features from Windows Embedded 8.1 Industry](lockdown-features-windows-10.md) diff --git a/windows/configure/configure-mobile.md b/windows/configure/configure-mobile.md index fdef1fa5f8..db4bb93e0f 100644 --- a/windows/configure/configure-mobile.md +++ b/windows/configure/configure-mobile.md @@ -1,5 +1,5 @@ --- -title: configure mobile +title: Configure Windows 10 Mobile devices description: keywords: Windows 10, MDM, WSUS, Windows update ms.prod: w10 @@ -10,5 +10,19 @@ localizationpriority: high author: jdeckerMS --- -# configure mobile +# Configure Windows 10 Mobile devices + +Windows 10 Mobile enables administrators to define what users can see and do on a device, which you might think of as "configuring" or "customizing" or "device lockdown". Your device configuration can provide a standard Start screen with pre-installed apps, or restrict various settings and features, or even limit the device to run only a single app (kiosk). + +## In this section + +| Topic | Description | +| --- | --- | +| [Set up a kiosk on Windows 10 Mobile or Windows 10 Mobile Enterprise](set-up-a-kiosk-for-windows-10-for-mobile-edition.md) | You can configure a device running Windows 10 Mobile or Windows 10 Mobile Enterprise as a kiosk device, so that users can only interact with a single application that you select. | +| [Use Windows Configuration Designer to configure Windows 10 Mobile devices](provisioning-configure-mobile.md) | Use Windows Configuration Designer to create provisioning packages. Using provisioning packages, you can easily specify desired configuration and settings required to enroll the devices into management and then apply that configuration to target devices in a matter of minutes. | +| [Use the Lockdown Designer app to configure Windows 10 Mobile devices](mobile-lockdown-designer.md) | The Lockdown Designer app provides a guided wizard-like process to generate a Lockdown XML file that you can apply to devices running Windows 10 Mobile. | +| [Configure Windows 10 Mobile using Lockdown XML](lockdown-xml.md) | Windows 10 Mobile allows enterprises to lock down a device, define multiple user roles, and configure custom layouts on a device. | +| [Start layout XML for mobile editions of Windows 10 (reference)](start-layout-xml-mobile.md) | On Windows 10 Mobile, you can use the XML-based layout to modify the Start screen and provide the most robust and complete Start customization experience. This reference topic describes the supported elements and attributes for the LayoutModification.xml file. | +| [Settings and quick actions that can be locked down in Windows 10 Mobile](settings-that-can-be-locked-down.md) | This topic lists the settings and quick actions that can be locked down in Windows 10 Mobile. | +| [Product IDs in Windows 10 Mobile](product-ids-in-windows-10-mobile.md) | You can use the product ID and Application User Model (AUMID) in Lockdown.xml to specify apps that will be available to the user. | diff --git a/windows/configure/customize-and-export-start-layout.md b/windows/configure/customize-and-export-start-layout.md index 102272ce54..cbff20b284 100644 --- a/windows/configure/customize-and-export-start-layout.md +++ b/windows/configure/customize-and-export-start-layout.md @@ -36,7 +36,7 @@ You can deploy the resulting .xml file to devices using one of the following met - [Group Policy](customize-windows-10-start-screens-by-using-group-policy.md) -- [Windows Imaging and Configuration Designer provisioning package](customize-windows-10-start-screens-by-using-provisioning-packages-and-icd.md) +- [Windows Configuration Designer provisioning package](customize-windows-10-start-screens-by-using-provisioning-packages-and-icd.md) - [Mobile device management (MDM)](customize-windows-10-start-screens-by-using-mobile-device-management.md) @@ -47,7 +47,7 @@ To prepare a Start layout for export, you simply customize the Start layout on a **To prepare a test computer** -1. Set up a test computer on which to customize the Start layout. Your test computer should have the operating system that is installed on the users’ computers (Windows 10 Enterprise or Windows 10 Education). Install all apps and services that the Start layout should display. +1. Set up a test computer on which to customize the Start layout. Your test computer should have the operating system that is installed on the users’ computers (Windows 10 Pro, Enterprise, or Education). Install all apps and services that the Start layout should display. 2. Create a new user account that you will use to customize the Start layout. @@ -70,7 +70,8 @@ To prepare a Start layout for export, you simply customize the Start layout on a - **Create your own app groups**. Drag the apps to an empty area. To name a group, click above the group of tiles and then type the name in the **Name group** field that appears above the group. -## Export the Start layout + +## Export the Start layout When you have the Start layout that you want your users to see, use the [Export-StartLayout](https://go.microsoft.com/fwlink/p/?LinkId=620879) cmdlet in Windows PowerShell to export the Start layout to an .xml file. diff --git a/windows/configure/customize-windows-10-start-screens-by-using-group-policy.md b/windows/configure/customize-windows-10-start-screens-by-using-group-policy.md index 47b68d045b..5a2c3940fa 100644 --- a/windows/configure/customize-windows-10-start-screens-by-using-group-policy.md +++ b/windows/configure/customize-windows-10-start-screens-by-using-group-policy.md @@ -1,6 +1,6 @@ --- -title: Customize Windows 10 Start with Group Policy (Windows 10) -description: In Windows 10 Enterprise and Windows 10 Education, you can use a Group Policy Object (GPO) to deploy a customized Start layout to users in a domain. +title: Customize Windows 10 Start and tasbkar with Group Policy (Windows 10) +description: In Windows 10, you can use a Group Policy Object (GPO) to deploy a customized Start layout to users in a domain. ms.assetid: F4A47B36-F1EF-41CD-9CBA-04C83E960545 keywords: ["Start layout", "start menu", "layout", "group policy"] ms.prod: w10 @@ -19,7 +19,7 @@ localizationpriority: high >**Looking for consumer information?** See [Customize the Start menu](https://go.microsoft.com/fwlink/p/?LinkId=623630) -In Windows 10 Enterprise and Windows 10 Education, you can use a Group Policy Object (GPO) to deploy a customized Start and taskbar layout to users in a domain. No reimaging is required, and the layout can be updated simply by overwriting the .xml file that contains the layout. This enables you to customize Start and taskbar layouts for different departments or organizations, with minimal management overhead. +In Windows 10 Pro, Enterprise, and Education, you can use a Group Policy Object (GPO) to deploy a customized Start and taskbar layout to users in a domain. No reimaging is required, and the layout can be updated simply by overwriting the .xml file that contains the layout. This enables you to customize Start and taskbar layouts for different departments or organizations, with minimal management overhead. This topic describes how to update Group Policy settings to display a customized Start and taskbar layout when the users sign in. By creating a domain-based GPO with these settings, you can deploy a customized Start and taskbar layout to users in a domain. @@ -33,7 +33,7 @@ This topic describes how to update Group Policy settings to display a customized ## Operating system requirements -Start and taskbar layout control using Group Policy is supported in Windows 10 Enterprise and Windows 10 Education, Version 1607. Start and taskbar layout control is not supported in Windows 10 Pro. +Start and taskbar layout control using Group Policy is supported in Windows 10 Enterprise and Windows 10 Education, version 1607. Start and taskbar layout control is supported in Windows 10 Pro in Windows 10, version 1703. The GPO can be configured from any computer on which the necessary ADMX and ADML files (StartMenu.admx and StartMenu.adml) for Windows 10 are installed. In Group Policy, ADMX files are used to define Registry-based policy settings in the Administrative Templates category. To find out how to create a central store for Administrative Templates files, see [article 929841, written for Windows Vista and still applicable](https://go.microsoft.com/fwlink/p/?LinkId=691687) in the Microsoft Knowledge Base. diff --git a/windows/configure/customize-windows-10-start-screens-by-using-mobile-device-management.md b/windows/configure/customize-windows-10-start-screens-by-using-mobile-device-management.md index 2ccace55f5..16f95659b2 100644 --- a/windows/configure/customize-windows-10-start-screens-by-using-mobile-device-management.md +++ b/windows/configure/customize-windows-10-start-screens-by-using-mobile-device-management.md @@ -1,6 +1,6 @@ --- -title: Customize Windows 10 Start with mobile device management (MDM) (Windows 10) -description: In Windows 10 Enterprise and Windows 10 Education, you can use a mobile device management (MDM) policy to deploy a customized Start layout to users. +title: Customize Windows 10 Start and taskbar with mobile device management (MDM) (Windows 10) +description: In Windows 10, you can use a mobile device management (MDM) policy to deploy a customized Start and tasbkar layout to users. ms.assetid: F487850D-8950-41FB-9B06-64240127C1E4 keywords: ["start screen", "start menu"] ms.prod: w10 @@ -10,7 +10,7 @@ author: jdeckerMS localizationpriority: medium --- -# Customize Windows 10 Start with mobile device management (MDM) +# Customize Windows 10 Start and taskbar with mobile device management (MDM) **Applies to** @@ -18,18 +18,17 @@ localizationpriority: medium - Windows 10 - Windows 10 Mobile -**Looking for consumer information?** +>**Looking for consumer information?** [Customize the Start menu](https://go.microsoft.com/fwlink/p/?LinkId=623630) -- [Customize the Start menu](https://go.microsoft.com/fwlink/p/?LinkId=623630) +In Windows 10 Mobile, Windows 10 Pro, Windows 10 Enterprise, and Windows 10 Education, you can use a mobile device management (MDM) policy to deploy a customized Start and taskbar layout to users. No reimaging is required, and the layout can be updated simply by overwriting the .xml file that contains the layout. This enables you to customize Start layouts for different departments or organizations, with minimal management overhead. -In Windows 10 Mobile, Windows 10 Enterprise, and Windows 10 Education, you can use a mobile device management (MDM) policy to deploy a customized Start layout to users. No reimaging is required, and the Start layout can be updated simply by overwriting the .xml file that contains the layout. This enables you to customize Start layouts for different departments or organizations, with minimal management overhead. +>[!NOTE] +>Support for applying a customized taskbar using MDM is added in Windows 10, version 1703. -> **Note:** Customized taskbar configuration cannot be applied using MDM at this time. +**Before you begin**: [Customize and export Start layout](customize-and-export-start-layout.md) for desktop editions or [create a Start layout XML](mobile-lockdown-designer.md) for mobile. -**Before you begin**: [Customize and export Start layout](customize-and-export-start-layout.md) for desktop editions or [create a Start layout XML](start-layout-xml-mobile.md) for mobile. - -**Warning**   -When a full Start layout is applied with this method, the users cannot pin, unpin, or uninstall apps from Start. Users can view and open all apps in the **All Apps** view, but they cannot pin any apps to Start. When a partial Start layout is applied, the contents of the specified tile groups cannot be changed, but users can move those groups, and can also create and customize their own groups. +>[!WARNING]  +>When a full Start layout is applied with this method, the users cannot pin, unpin, or uninstall apps from Start. Users can view and open all apps in the **All Apps** view, but they cannot pin any apps to Start. When a partial Start layout is applied, the contents of the specified tile groups cannot be changed, but users can move those groups, and can also create and customize their own groups.   @@ -40,8 +39,8 @@ Two features enable Start layout control: - The **Export-StartLayout** cmdlet in Windows PowerShell exports a description of the current Start layout in .xml file format. - **Note**   - To import the layout of Start to a mounted Windows image, use the [Import-StartLayout](https://go.microsoft.com/fwlink/p/?LinkId=623707) cmdlet. + >[!NOTE]   + >To import the layout of Start to a mounted Windows image, use the [Import-StartLayout](https://go.microsoft.com/fwlink/p/?LinkId=623707) cmdlet.   diff --git a/windows/configure/customize-windows-10-start-screens-by-using-provisioning-packages-and-icd.md b/windows/configure/customize-windows-10-start-screens-by-using-provisioning-packages-and-icd.md index 7cc8395f8b..aded7204d4 100644 --- a/windows/configure/customize-windows-10-start-screens-by-using-provisioning-packages-and-icd.md +++ b/windows/configure/customize-windows-10-start-screens-by-using-provisioning-packages-and-icd.md @@ -1,5 +1,5 @@ --- -title: Customize Windows 10 Start with ICD and provisioning packages (Windows 10) +title: Customize Windows 10 Start and tasbkar with provisioning packages (Windows 10) description: In Windows 10, you can use a provisioning package to deploy a customized Start layout to users. ms.assetid: AC952899-86A0-42FC-9E3C-C25F45B1ACAC keywords: ["Start layout", "start menu"] @@ -10,7 +10,7 @@ author: jdeckerMS localizationpriority: medium --- -# Customize Windows 10 Start and taskbar with ICD and provisioning packages +# Customize Windows 10 Start and taskbar with provisioning packages **Applies to** @@ -18,16 +18,14 @@ localizationpriority: medium - Windows 10 - Windows 10 Mobile -**Looking for consumer information?** +>**Looking for consumer information?** [Customize the Start menu](https://go.microsoft.com/fwlink/p/?LinkId=623630) -- [Customize the Start menu](https://go.microsoft.com/fwlink/p/?LinkId=623630) - -In Windows 10 Mobile, Windows 10 Enterprise, and Windows 10 Education, version 1607, you can use a provisioning package that you create with Windows Imaging and Configuration Designer (ICD) tool to deploy a customized Start and taskbar layout to users. No reimaging is required, and the Start and taskbar layout can be updated simply by overwriting the .xml file that contains the layout. The provisioning package can be applied to a running device. This enables you to customize Start and taskbar layouts for different departments or organizations, with minimal management overhead. +In Windows 10 Mobile, Windows 10 Pro, Windows 10 Enterprise, and Windows 10 Education, version 1703, you can use a provisioning package that you create with Windows Configuration Designer to deploy a customized Start and taskbar layout to users. No reimaging is required, and the Start and taskbar layout can be updated simply by overwriting the .xml file that contains the layout. The provisioning package can be applied to a running device. This enables you to customize Start and taskbar layouts for different departments or organizations, with minimal management overhead. >[!IMPORTANT] >If you use a provisioning package to configure the taskbar, your configuration will be reapplied each time the explorer.exe process restarts. If your configuration pins an app and the user unpins that app, the user's change will be overwritten the next time the configuration is applied. To apply a taskbar configuration and allow users to make changes that will persist, apply your configuration by using Group Policy. -**Before you begin**: [Customize and export Start layout](customize-and-export-start-layout.md) for desktop editions or [create a Start layout XML](start-layout-xml-mobile.md) for mobile. +**Before you begin**: [Customize and export Start layout](customize-and-export-start-layout.md) for desktop editions or [create a Start layout XML](mobile-lockdown-designer.md) for mobile. ## How Start layout control works @@ -42,17 +40,18 @@ Three features enable Start and taskbar layout control: - [You can modify the Start .xml file](configure-windows-10-taskbar.md) to include `` or create an .xml file just for the taskbar configuration. -- In ICD, you use the **Start/StartLayout** setting to set the path to the .xml file that defines the Start and taskbar layout. +- In Windows Configuration Designer, you use the **Start/StartLayout** setting to set the path to the .xml file that defines the Start and taskbar layout. ## Create a provisioning package that contains a customized Start layout -Use the [Imaging and Configuration Designer (ICD) tool](https://go.microsoft.com/fwlink/p/?LinkID=525483) included in the Windows Assessment and Deployment Kit (ADK) for Windows 10 to create a provisioning package that applies a customized Start and taskbar layout. [Install the ADK.](https://developer.microsoft.com/windows/hardware/windows-assessment-deployment-kit) +Use the Windows Configuration Designer tool to create a provisioning package. [Learn how to install Windows Configuration Designer.](provisioning-install-icd.md) >[!IMPORTANT] >When you build a provisioning package, you may include sensitive information in the project files and in the provisioning package (.ppkg) file. Although you have the option to encrypt the .ppkg file, project files are not encrypted. You should store the project files in a secure location and delete the project files when they are no longer needed. -1. Open ICD (by default, %systemdrive%\\Program Files (x86)\\Windows Kits\\10\\Assessment and Deployment Kit\\Imaging and Configuration Designer\\x86\\ICD.exe). +1. Open Windows Configuration Designer (by default, %systemdrive%\\Program Files (x86)\\Windows Kits\\10\\Assessment and Deployment Kit\\Imaging and Configuration Designer\\x86\\ICD.exe). + 2. Choose **Advanced provisioning**. 3. Name your project, and click **Next**. diff --git a/windows/configure/guidelines-for-assigned-access-app.md b/windows/configure/guidelines-for-assigned-access-app.md index 0552f8af1a..30dd845161 100644 --- a/windows/configure/guidelines-for-assigned-access-app.md +++ b/windows/configure/guidelines-for-assigned-access-app.md @@ -20,7 +20,7 @@ localizationpriority: high You can use assigned access to restrict customers at your business to using only one Windows app so your device acts like a kiosk. Administrators can use assigned access to restrict a selected user account to access a single Windows app. You can choose almost any Windows app for assigned access; however, some apps may not provide a good user experience. -The following guidelines may help you choose an appropriate Windows app for your assigned access experience in Windows 10, Version 1607. +The following guidelines may help you choose an appropriate Windows app for your assigned access experience. ## General guidelines @@ -82,19 +82,7 @@ The above guidelines may help you select or develop an appropriate Windows app f [Customizing Your Device Experience with Assigned Access](https://channel9.msdn.com/Events/Build/2016/P508) -## Related topics -[Set up a shared or guest PC with Windows 10](set-up-shared-or-guest-pc.md) - -[Set up a device for anyone to use (kiosk mode)](set-up-a-device-for-anyone-to-use.md) - -[Set up a kiosk on Windows 10 Pro, Enterprise, or Education](set-up-a-kiosk-for-windows-10-for-desktop-editions.md) - -[Set up a kiosk on Windows 10 Mobile or Windows 10 Mobile Enterprise](set-up-a-kiosk-for-windows-10-for-mobile-edition.md) - -[Lock down Windows 10 to specific apps](lock-down-windows-10-to-specific-apps.md) - -    diff --git a/windows/configure/images/account-management-details.PNG b/windows/configure/images/account-management-details.PNG new file mode 100644 index 0000000000..e4307d8f7b Binary files /dev/null and b/windows/configure/images/account-management-details.PNG differ diff --git a/windows/configure/images/account-management.PNG b/windows/configure/images/account-management.PNG new file mode 100644 index 0000000000..34165dfcd6 Binary files /dev/null and b/windows/configure/images/account-management.PNG differ diff --git a/windows/configure/images/add-applications-details.PNG b/windows/configure/images/add-applications-details.PNG new file mode 100644 index 0000000000..2efd3483ae Binary files /dev/null and b/windows/configure/images/add-applications-details.PNG differ diff --git a/windows/configure/images/add-applications.PNG b/windows/configure/images/add-applications.PNG new file mode 100644 index 0000000000..2316deb2fd Binary files /dev/null and b/windows/configure/images/add-applications.PNG differ diff --git a/windows/configure/images/add-certificates-details.PNG b/windows/configure/images/add-certificates-details.PNG new file mode 100644 index 0000000000..78cd783282 Binary files /dev/null and b/windows/configure/images/add-certificates-details.PNG differ diff --git a/windows/configure/images/add-certificates.PNG b/windows/configure/images/add-certificates.PNG new file mode 100644 index 0000000000..24cb605d1c Binary files /dev/null and b/windows/configure/images/add-certificates.PNG differ diff --git a/windows/configure/images/apps.png b/windows/configure/images/apps.png new file mode 100644 index 0000000000..5cb3b7ec8f Binary files /dev/null and b/windows/configure/images/apps.png differ diff --git a/windows/configure/images/bulk-enroll-mobile-details.PNG b/windows/configure/images/bulk-enroll-mobile-details.PNG new file mode 100644 index 0000000000..8329d39cfc Binary files /dev/null and b/windows/configure/images/bulk-enroll-mobile-details.PNG differ diff --git a/windows/configure/images/bulk-enroll-mobile.PNG b/windows/configure/images/bulk-enroll-mobile.PNG new file mode 100644 index 0000000000..812b57e8e0 Binary files /dev/null and b/windows/configure/images/bulk-enroll-mobile.PNG differ diff --git a/windows/configure/images/developer-setup.PNG b/windows/configure/images/developer-setup.PNG new file mode 100644 index 0000000000..8c93d5ed91 Binary files /dev/null and b/windows/configure/images/developer-setup.PNG differ diff --git a/windows/configure/images/finish-details-mobile.PNG b/windows/configure/images/finish-details-mobile.PNG new file mode 100644 index 0000000000..c25a6b4b2f Binary files /dev/null and b/windows/configure/images/finish-details-mobile.PNG differ diff --git a/windows/configure/images/finish-details.png b/windows/configure/images/finish-details.png new file mode 100644 index 0000000000..727efac696 Binary files /dev/null and b/windows/configure/images/finish-details.png differ diff --git a/windows/configure/images/finish-mobile.PNG b/windows/configure/images/finish-mobile.PNG new file mode 100644 index 0000000000..336e24289e Binary files /dev/null and b/windows/configure/images/finish-mobile.PNG differ diff --git a/windows/configure/images/finish.PNG b/windows/configure/images/finish.PNG new file mode 100644 index 0000000000..7c65da1799 Binary files /dev/null and b/windows/configure/images/finish.PNG differ diff --git a/windows/configure/images/icd-create-options-1703.PNG b/windows/configure/images/icd-create-options-1703.PNG new file mode 100644 index 0000000000..007e740683 Binary files /dev/null and b/windows/configure/images/icd-create-options-1703.PNG differ diff --git a/windows/configure/images/icd-desktop-1703.PNG b/windows/configure/images/icd-desktop-1703.PNG new file mode 100644 index 0000000000..7c060af4d0 Binary files /dev/null and b/windows/configure/images/icd-desktop-1703.PNG differ diff --git a/windows/configure/images/kiosk-account-details.PNG b/windows/configure/images/kiosk-account-details.PNG new file mode 100644 index 0000000000..53c31880ea Binary files /dev/null and b/windows/configure/images/kiosk-account-details.PNG differ diff --git a/windows/configure/images/kiosk-account.PNG b/windows/configure/images/kiosk-account.PNG new file mode 100644 index 0000000000..f78f9b9d56 Binary files /dev/null and b/windows/configure/images/kiosk-account.PNG differ diff --git a/windows/configure/images/kiosk-common-details.PNG b/windows/configure/images/kiosk-common-details.PNG new file mode 100644 index 0000000000..5eda9b293e Binary files /dev/null and b/windows/configure/images/kiosk-common-details.PNG differ diff --git a/windows/configure/images/kiosk-common.PNG b/windows/configure/images/kiosk-common.PNG new file mode 100644 index 0000000000..f5873a53aa Binary files /dev/null and b/windows/configure/images/kiosk-common.PNG differ diff --git a/windows/configure/images/ld-apps.PNG b/windows/configure/images/ld-apps.PNG new file mode 100644 index 0000000000..ef65ff9a52 Binary files /dev/null and b/windows/configure/images/ld-apps.PNG differ diff --git a/windows/configure/images/ld-buttons.PNG b/windows/configure/images/ld-buttons.PNG new file mode 100644 index 0000000000..d89eff3b35 Binary files /dev/null and b/windows/configure/images/ld-buttons.PNG differ diff --git a/windows/configure/images/ld-connect.PNG b/windows/configure/images/ld-connect.PNG new file mode 100644 index 0000000000..15094b0e2b Binary files /dev/null and b/windows/configure/images/ld-connect.PNG differ diff --git a/windows/configure/images/ld-csp.PNG b/windows/configure/images/ld-csp.PNG new file mode 100644 index 0000000000..6d7caa5163 Binary files /dev/null and b/windows/configure/images/ld-csp.PNG differ diff --git a/windows/configure/images/ld-export.PNG b/windows/configure/images/ld-export.PNG new file mode 100644 index 0000000000..970e5939bc Binary files /dev/null and b/windows/configure/images/ld-export.PNG differ diff --git a/windows/configure/images/ld-other.PNG b/windows/configure/images/ld-other.PNG new file mode 100644 index 0000000000..c8b5f7518a Binary files /dev/null and b/windows/configure/images/ld-other.PNG differ diff --git a/windows/configure/images/ld-pair.PNG b/windows/configure/images/ld-pair.PNG new file mode 100644 index 0000000000..0859810e73 Binary files /dev/null and b/windows/configure/images/ld-pair.PNG differ diff --git a/windows/configure/images/ld-quick.PNG b/windows/configure/images/ld-quick.PNG new file mode 100644 index 0000000000..63a6173103 Binary files /dev/null and b/windows/configure/images/ld-quick.PNG differ diff --git a/windows/configure/images/ld-settings.PNG b/windows/configure/images/ld-settings.PNG new file mode 100644 index 0000000000..eb6a37d925 Binary files /dev/null and b/windows/configure/images/ld-settings.PNG differ diff --git a/windows/configure/images/ld-start.PNG b/windows/configure/images/ld-start.PNG new file mode 100644 index 0000000000..4081f3e1e2 Binary files /dev/null and b/windows/configure/images/ld-start.PNG differ diff --git a/windows/configure/images/ld-sync.PNG b/windows/configure/images/ld-sync.PNG new file mode 100644 index 0000000000..3f54d910ac Binary files /dev/null and b/windows/configure/images/ld-sync.PNG differ diff --git a/windows/configure/images/ldstore.PNG b/windows/configure/images/ldstore.PNG new file mode 100644 index 0000000000..63f0eedee7 Binary files /dev/null and b/windows/configure/images/ldstore.PNG differ diff --git a/windows/configure/images/lily.jpg b/windows/configure/images/lily.jpg new file mode 100644 index 0000000000..eb144d1f2b Binary files /dev/null and b/windows/configure/images/lily.jpg differ diff --git a/windows/configure/images/set-up-device-details-desktop.PNG b/windows/configure/images/set-up-device-details-desktop.PNG new file mode 100644 index 0000000000..97c8a1b704 Binary files /dev/null and b/windows/configure/images/set-up-device-details-desktop.PNG differ diff --git a/windows/configure/images/set-up-device-details-mobile.PNG b/windows/configure/images/set-up-device-details-mobile.PNG new file mode 100644 index 0000000000..f41fe99a72 Binary files /dev/null and b/windows/configure/images/set-up-device-details-mobile.PNG differ diff --git a/windows/configure/images/set-up-device-details.PNG b/windows/configure/images/set-up-device-details.PNG new file mode 100644 index 0000000000..031dac6fe6 Binary files /dev/null and b/windows/configure/images/set-up-device-details.PNG differ diff --git a/windows/configure/images/set-up-device-mobile.PNG b/windows/configure/images/set-up-device-mobile.PNG new file mode 100644 index 0000000000..b8173385d4 Binary files /dev/null and b/windows/configure/images/set-up-device-mobile.PNG differ diff --git a/windows/configure/images/set-up-device.PNG b/windows/configure/images/set-up-device.PNG new file mode 100644 index 0000000000..0c9eb0e3ff Binary files /dev/null and b/windows/configure/images/set-up-device.PNG differ diff --git a/windows/configure/images/set-up-network-details-desktop.PNG b/windows/configure/images/set-up-network-details-desktop.PNG new file mode 100644 index 0000000000..83911ccbd0 Binary files /dev/null and b/windows/configure/images/set-up-network-details-desktop.PNG differ diff --git a/windows/configure/images/set-up-network-details-mobile.PNG b/windows/configure/images/set-up-network-details-mobile.PNG new file mode 100644 index 0000000000..8f515ba1f6 Binary files /dev/null and b/windows/configure/images/set-up-network-details-mobile.PNG differ diff --git a/windows/configure/images/set-up-network-details.PNG b/windows/configure/images/set-up-network-details.PNG new file mode 100644 index 0000000000..778b8497c4 Binary files /dev/null and b/windows/configure/images/set-up-network-details.PNG differ diff --git a/windows/configure/images/set-up-network-mobile.PNG b/windows/configure/images/set-up-network-mobile.PNG new file mode 100644 index 0000000000..9442b33e90 Binary files /dev/null and b/windows/configure/images/set-up-network-mobile.PNG differ diff --git a/windows/configure/images/set-up-network.PNG b/windows/configure/images/set-up-network.PNG new file mode 100644 index 0000000000..a0e856c103 Binary files /dev/null and b/windows/configure/images/set-up-network.PNG differ diff --git a/windows/configure/images/seven.png b/windows/configure/images/seven.png new file mode 100644 index 0000000000..285a92df0b Binary files /dev/null and b/windows/configure/images/seven.png differ diff --git a/windows/configure/images/six.png b/windows/configure/images/six.png index 8bf761ef20..e8906332ec 100644 Binary files a/windows/configure/images/six.png and b/windows/configure/images/six.png differ diff --git a/windows/configure/images/startannotated.png b/windows/configure/images/startannotated.png index d46f3a70c2..9261fd9078 100644 Binary files a/windows/configure/images/startannotated.png and b/windows/configure/images/startannotated.png differ diff --git a/windows/configure/index.md b/windows/configure/index.md index eceae9b24b..bbe9b61e15 100644 --- a/windows/configure/index.md +++ b/windows/configure/index.md @@ -18,17 +18,17 @@ Enterprises often need to apply custom configurations to devices for their users | Topic | Description | | --- | --- | -| [Configure Windows telemetry in your organization](configure-windows-telemetry-in-your-organization.md) | se this article to make informed decisions about how you can configure Windows telemetry in your organization. | -| [Manage connections from Windows operating system components to Microsoft services] (manage-connections-from-windows-operating-system-components-to-microsoft-services.md) | Learn about the network connections that Windows components make to Microsoft and also the privacy settings that affect data that is shared with either Microsoft or apps and how they can be managed by an IT Pro. | +| [Configure Windows telemetry in your organization](configure-windows-telemetry-in-your-organization.md) | Use this article to make informed decisions about how you can configure Windows telemetry in your organization. | +| [Manage connections from Windows operating system components to Microsoft services](manage-connections-from-windows-operating-system-components-to-microsoft-services.md) | Learn about the network connections that Windows components make to Microsoft and also the privacy settings that affect data that is shared with either Microsoft or apps and how they can be managed by an IT Pro. | | [Manage Wi-Fi Sense in your company](manage-wifi-sense-in-enterprise.md) | Wi-Fi Sense automatically connects you to Wi-Fi, so you can get online quickly in more places. It can connect you to open Wi-Fi hotspots it knows about through crowdsourcing, or to Wi-Fi networks your contacts have shared with you by using Wi-Fi Sense. The initial settings for Wi-Fi Sense are determined by the options you chose when you first set up your PC with Windows 10. | -| [Configure kiosk and shared devices running Windows 10 desktop editions](kiosk-shared-pc.md) | | -| [Configure Windows 10 Mobile devices](configure-mobile.md) | | -| [Configure Start, taskbar, and lock screen](start-taskbar-lockscreen.md) | | -| [Cortana integration in your business or enterprise](cortana-at-work-overview.md) | | +| [Configure kiosk and shared devices running Windows 10 desktop editions](kiosk-shared-pc.md) | These topics help you configure Windows 10 devices to be shared by multiple users or to run as a kiosk device that runs a single app. | +| [Configure Windows 10 Mobile devices](configure-mobile.md) | These topics help you configure the features and apps and Start screen for a device running Windows 10 Mobile, as well as how to configure a kiosk device that runs a single app. | +| [Configure Start, taskbar, and lock screen](start-taskbar-lockscreen.md) | A standard, customized Start layout can be useful on devices that are common to multiple users and devices that are locked down for specialized purposes. Configuring the taskbar allows the organization to pin useful apps for their employees and to remove apps that are pinned by default. | +| [Cortana integration in your business or enterprise](cortana-at-work-overview.md) | The world’s first personal digital assistant helps users get things done, even at work. Cortana includes powerful configuration options specifically to optimize for unique small to medium-sized business and enterprise environments. | | [Configure access to Windows Store](stop-employees-from-using-the-windows-store.md) | IT Pros can configure access to Windows Store for client computers in their organization. For some organizations, business policies require blocking access to Windows Store. | -| [Provisioning packages for Windows 10](provisioning-packages.md) | | +| [Provisioning packages for Windows 10](provisioning-packages.md) | Learn how to use the Windows Configuration Designer and provisioning packages to easily configure multiple devices. | | [Lockdown features from Windows Embedded 8.1 Industry](lockdown-features-windows-10.md) | Many of the lockdown features available in Windows Embedded 8.1 Industry have been modified in some form for Windows 10. | -| [Change history for Configure Windows 10](change-history-for-configure-windows-10.md) | | +| [Change history for Configure Windows 10](change-history-for-configure-windows-10.md) | This topic lists new and updated topics in the Configure Windows 10 documentation for Windows 10 and Windows 10 Mobile. | diff --git a/windows/configure/kiosk-shared-pc.md b/windows/configure/kiosk-shared-pc.md index e434735152..2afc67e022 100644 --- a/windows/configure/kiosk-shared-pc.md +++ b/windows/configure/kiosk-shared-pc.md @@ -1,14 +1,23 @@ --- -title: kiosk shared pc (Windows 10) +title: Configure kiosk and shared devices running Windows desktop editions (Windows 10) description: -keywords: Windows 10, MDM, WSUS, Windows update ms.prod: w10 ms.mktglfcycl: manage ms.sitesec: library ms.pagetype: security -localizationpriority: high +localizationpriority: medium author: jdeckerMS --- -# kiosk shared pc +# Configure kiosk and shared devices running Windows desktop editions +Some desktop devices in an enterprise serve a special purpose, such as a common PC in a touchdown space that any employee can sign in to, or a PC in the lobby that customers can use to view your product catalog. Windows 10 is easy to configure for shared use or for use as a kiosk (single app). + +## In this section + +| Topic | Description | +| --- | --- | +| [Set up a shared or guest PC with Windows 10](set-up-a-device-for-anyone-to-use.md) | Windows 10, version 1607, introduced *shared PC mode*, which optimizes Windows 10 for shared use scenarios, such as touchdown spaces in an enterprise and temporary customer use in retail. | +| [Set up a kiosk on Windows 10 Pro, Enterprise, or Education](set-up-a-kiosk-for-windows-10-for-desktop-editions.md) | You can configure a device running Windows 10 Pro, Windows 10 Enterprise, or Windows 10 Education as a kiosk device, so that users can only interact with a single application that you select. | +| [Guidelines for choosing an app for assigned access (kiosk mode)](guidelines-for-assigned-access-app.md) | You can choose almost any Windows app for assigned access; however, some apps may not provide a good user experience. This topic provides guidelines to help you choose an approprate app for a kiosk device. | +| [Lock down Windows 10 to specific apps (AppLocker)](lock-down-windows-10-to-specific-apps.md) | Learn how to configure a device running Windows 10 Enterprise or Windows 10 Education so that users can only run a few specific apps. The result is similar to a kiosk device, but with multiple apps available. For example, you might set up a library computer so that users can search the catalog and browse the Internet, but can't run any other apps or change computer settings. | \ No newline at end of file diff --git a/windows/configure/lock-down-windows-10-to-specific-apps.md b/windows/configure/lock-down-windows-10-to-specific-apps.md index 8ab992a6f0..8ae79ef7f2 100644 --- a/windows/configure/lock-down-windows-10-to-specific-apps.md +++ b/windows/configure/lock-down-windows-10-to-specific-apps.md @@ -112,14 +112,11 @@ In addition to specifying the apps that users can run, you should also restrict To learn more about locking down features, see [Customizations for Windows 10 Enterprise](https://go.microsoft.com/fwlink/p/?LinkId=691442). -## Customize Start screen layout for the device +## Customize Start screen layout for the device (recommended) Configure the Start menu on the device to only show tiles for the permitted apps. You will make the changes manually, export the layout to an .xml file, and then apply that file to devices to prevent users from making changes. For instructions, see [Manage Windows 10 Start layout options](windows-10-start-layout-options-and-policies.md). -## Related topics - -- [Provisioning packages for Windows 10](../deploy/provisioning-packages.md)   diff --git a/windows/configure/lockdown-xml.md b/windows/configure/lockdown-xml.md index 869ce086e1..7525f64aa6 100644 --- a/windows/configure/lockdown-xml.md +++ b/windows/configure/lockdown-xml.md @@ -19,9 +19,9 @@ localizationpriority: high Windows 10 Mobile allows enterprises to lock down a device, define multiple user roles, and configure custom layouts on a device. For example, the enterprise can lock down a device so that only applications and settings in an allow list are available. -This topic provides example XML that you can use in your own lockdown XML file that can be included in a provisioning package or when using a mobile device management (MDM) solution to push lockdown settings to enrolled devices. +This is accomplished using Lockdown XML, an XML file that contains settings for Windows 10 Mobile. When you deploy the lockdown XML file to a device, it is saved on the device as **wehlockdown.xml**. When the device boots, it looks for wehlockdown.xml and applies any settings configured in the file. -Lockdown XML is an XML file that contains settings for Windows 10 Mobile. When you deploy the lockdown XML file to a device, it is saved on the device as **wehlockdown.xml**. When the device boots, it looks for wehlockdown.xml and applies any settings configured in the file. In this topic, you'll learn how to create an XML file that contains all lockdown entries available in the AssignedAccessXml area of the [EnterpriseAssignedAccess configuration service provider (CSP)](https://go.microsoft.com/fwlink/p/?LinkID=618601). +In this topic, you'll learn how to create an XML file that contains all lockdown entries available in the AssignedAccessXml area of the [EnterpriseAssignedAccess configuration service provider (CSP)](https://msdn.microsoft.com/windows/hardware/commercialize/customize/mdm/enterpriseassignedaccess-csp). This topic provides example XML that you can use in your own lockdown XML file that can be included in a provisioning package or when using a mobile device management (MDM) solution to push lockdown settings to enrolled devices. You can also use the [Lockdown Designer app](mobile-lockdown-designer.md) to configure and export your lockdown XML file. > [!NOTE] > On Windows 10 desktop editions, *assigned access* is a feature that lets you configure the device to run a single app above the lockscreen ([kiosk mode](set-up-a-device-for-anyone-to-use.md)). On a Windows 10 Mobile device, assigned access refers to the lockdown settings in AssignedAccessXml in the [EnterpriseAssignedAccess configuration service provider (CSP)](https://go.microsoft.com/fwlink/p/?LinkID=618601). @@ -33,17 +33,17 @@ If you're not familiar with CSPs, read [Introduction to configuration service pr Let's start by looking at the basic structure of the lockdown XML file. You can start your file by pasting the following XML (or any other examples in this topic) into a text or XML editor, and saving the file as *filename*.xml. ```xml - - + + - - - - - - - - + + + + + + + + ``` @@ -52,7 +52,8 @@ Let's start by looking at the basic structure of the lockdown XML file. You can The settings for the Default role and other roles must be listed in your XML file in the order presented in this topic. All of the entries are optional. If you don't include a setting, that aspect of the device will operate as it would for an nonconfigured device. -> **Tip**  Keep your XML file easy to work with and to understand by using proper indentation and adding comments for each setting you configure. +>[!TIP] +>Keep your XML file easy to work with and to understand by using proper indentation and adding comments for each setting you configure. ## Action Center @@ -325,27 +326,28 @@ Use DisableMenuItems to prevent use of the context menu, which is displayed when ![XML for settings](images/SettingsXML.png) -The **Settings** section contains an `allow` list of pages in the Settings app. The following example allows all settings. +The **Settings** section contains an `allow` list of pages in the Settings app and quick actions. The following example allows all settings. ```xml ``` -In the following example, all system setting pages are enabled. +In earlier versions of Windows 10, you used the page name to define allowed settings. Starting in Windows 10, version 1703, you use the settings URI. + +In the following example for Windows 10, version 1703, all system setting pages that have a settings URI are enabled. ```xml - - - - - - - - - - + + + + + + + + + ``` @@ -372,10 +374,10 @@ For a list of the settings and quick actions that you can allow or block, see [S ## Start screen size Specify the size of the Start screen. In addition to 4/6 columns, you can also use 4/6/8 depending on screen resolutions. Valid values: - * Small sets the width to 4 columns on devices with short axis (less than 400epx) or 6 columns on devices with short axis (greater than or equal to 400epx). - * Large sets the width to 6 columns on devices with short axis (less than 400epx) or 8 columns on devices with short axis (greater than or equal to 400epx). - + - Small sets the width to 4 columns on devices with short axis (less than 400epx) or 6 columns on devices with short axis (greater than or equal to 400epx). + - Large sets the width to 6 columns on devices with short axis (less than 400epx) or 8 columns on devices with short axis (greater than or equal to 400epx). + If you have existing lockdown xml, you must update start screen size if your device has >=400epx on its short axis so that tiles on Start can fill all 8 columns if you want to use all 8 columns instead of 6, or use 6 columns instead of 4. [Learn about effective pixel width (epx) for different device size classes.](https://go.microsoft.com/fwlink/p/?LinkId=733340) @@ -383,47 +385,50 @@ For a list of the settings and quick actions that you can allow or block, see [S ## Configure additional roles - You can add custom configurations by role. In addition to the role configuration, you must also install a login application on the device. The app displays a list of available roles on the device; the user taps a role, such as "Manager"; the configuration defined for the "Manager" role is applied. +You can add custom configurations by role. In addition to the role configuration, you must also install a login application on the device. The app displays a list of available roles on the device; the user taps a role, such as "Manager"; the configuration defined for the "Manager" role is applied. - [Learn how to create a login application that will work with your Lockdown XML file.](https://github.com/Microsoft/Windows-universal-samples/tree/master/Samples/DeviceLockdownAzureLogin) For reference, see the [Windows.Embedded.DeviceLockdown API](https://msdn.microsoft.com/library/windows/apps/windows.embedded.devicelockdown). +[Learn how to create a login application that will work with your Lockdown XML file.](https://github.com/Microsoft/Windows-universal-samples/tree/master/Samples/DeviceLockdownAzureLogin) For reference, see the [Windows.Embedded.DeviceLockdown API](https://msdn.microsoft.com/library/windows/apps/windows.embedded.devicelockdown). - In the XML file, you define each role with a GUID and name, as shown in the following example: +In the XML file, you define each role with a GUID and name, as shown in the following example: - ```xml - - ``` +```xml + +``` + +You can create a GUID using a GUID generator -- free tools are available online. The GUID needs to be unique within this XML file. - You can create a GUID using a GUID generator -- free tools are available online. The GUID needs to be unique within this XML file. +You can configure the same settings for each role as you did for the default role, except Start screen size which can only be configured for the default role. If you use CSPRunner with roles, be aware that the last CSP setting applied will be retained across roles unless explicitly changed in each role configuration. CSP settings applied by CSPRunner may conflict with settings applied by MDM. - You can configure the same settings for each role as you did for the default role, except Start screen size which can only be configured for the default role. If you use CSPRunner with roles, be aware that the last CSP setting applied will be retained across roles unless explicitly changed in each role configuration. CSP settings applied by CSPRunner may conflict with settings applied by MDM. - - ```xml +```xml - - - - - - - - + + + + + + + + - - - - - - - + + + + + + + - ``` + +## Validate your XML + +You can validate your lockdown XML file against the [EnterpriseAssignedAccess XSD](https://msdn.microsoft.com/windows/hardware/commercialize/customize/mdm/enterpriseassignedaccess-xsd). ## Add lockdown XML to a provisioning package @@ -605,13 +610,12 @@ To push lockdown settings to enrolled devices, use the AssignedAccessXML setting - - - - + + + - - + + @@ -706,17 +710,16 @@ To push lockdown settings to enrolled devices, use the AssignedAccessXML setting - - - - - + + + + - - + + - - + + @@ -858,13 +861,4 @@ To push lockdown settings to enrolled devices, use the AssignedAccessXML setting [Settings and quick actions that can be locked down in Windows 10 Mobile](settings-that-can-be-locked-down.md) -[Product IDs in Windows 10 Mobile](product-ids-in-windows-10-mobile.md) - -  - -  - - - - - +[Product IDs in Windows 10 Mobile](product-ids-in-windows-10-mobile.md) \ No newline at end of file diff --git a/windows/configure/mobile-lockdown-designer.md b/windows/configure/mobile-lockdown-designer.md index ffd367b09a..ee7d0aa8b6 100644 --- a/windows/configure/mobile-lockdown-designer.md +++ b/windows/configure/mobile-lockdown-designer.md @@ -1,14 +1,165 @@ --- -title: lockdown designer (Windows 10) +title: Use the Lockdown Designer app to create a Lockdown XML file (Windows 10) description: -keywords: Windows 10, MDM, WSUS, Windows update ms.prod: w10 ms.mktglfcycl: manage ms.sitesec: library ms.pagetype: security -localizationpriority: high +localizationpriority: medium author: jdeckerMS --- -# lockdown designer +# Use the Lockdown Designer app to create a Lockdown XML file + +![Lockdown Designer in the Store](images/ldstore.png) + +Windows 10 Mobile allows enterprises to lock down a device, define multiple user roles, and configure custom layouts on a device. For example, the enterprise can lock down a device so that only applications and settings in an allow list are available. This is accomplished using Lockdown XML, an XML file that contains settings for Windows 10 Mobile. + +When you deploy the lockdown XML file to a device, it is saved on the device as **wehlockdown.xml**. When the device boots, it looks for wehlockdown.xml and applies any settings configured in the file. + +The Lockdown Designer app helps you configure and create a lockdown XML file that you can apply to devices running Windows 10 Mobile, version 1703, and includes a remote simulation to help you determine the layout for tiles on the Start screen. Lockdown Designer also validates the XML. Using Lockdown Designer is easier than [manually creating a lockdown XML file](lockdown-xml.md). + + + +## Overview + +Lockdown Designer can be installed on a PC running Windows 10, version 1607 or later. After you install the app, you connect a mobile device running Windows 10 Mobile, version 1703, to the PC. + +>[!NOTE] +>Lockdown Designer will not make any changes to the connected device, but we recommend that you use a test device. + +Lockdown Designer will populate the available settings and apps to configure from the connected device. Using the different pages in the app, you select the settings, apps, and layout to be included in the lockdown XML. + +When you're done, you export the configuration to a lockdown XML file. This configuration can be applied to any device running Windows 10 Mobile, version 1703. + +>[!NOTE] +>You can also import an existing WEHLockdown.xml file to Lockdown Designer and modify it in the app. + +## Prepare the test mobile device + +Perform these steps on the device running Windows 10 Mobile that you will use to supply the settings, apps, and layout to Lockdown Designer. + +1. Install all apps on the device that you want to include in the configuration, including line-of-business apps. + +2. On the mobile device, go to **Settings** > **Update & security** > **For developers**, enable **Developer mode**. + +3. Read the disclaimer, then click **Yes** to accept the change. + +4. Enable **Device discovery**, and then turn on **Device Portal**. + +## Prepare the PC + +[Install Lockdown Designer](https://www.microsoft.com/store/r/9nblggh40753) on the PC. + +If the PC and the test mobile device are on the same Wi-Fi network, you can connect the devices using Wi-Fi. + +If you want to connect the PC and the test mobile device using a USB cable, perform the following steps on the PC: + +1. [Install the Windows 10 Software Development Kit (SDK)](https://developer.microsoft.com/windows/downloads/windows-10-sdk). This enables the **Windows Phone IP over USB Transport (IpOverUsbSvc)** service. + +2. Open a command prompt as an administrator and run `checknetisolation LoopbackExempt -a -n=microsoft.lockdowndesigner_8wekyb3d8bbwe` + + >[!NOTE] + >Loopback is permitted only for development purposes. To remove the loopback exemption when you're done using Lockdown Designer, run `checknetisolation LoopbackExempt -d -n=microsoft.lockdowndesigner_8wekyb3d8bbwe` + + + + +## Connect the mobile device to Lockdown Designer + +**Using Wi-Fi** + +1. Open Lockdown Designer. + +2. Click **Create new project**. + +3. On the test mobile device, go to **Settings** > **Update & security** > **For developers** > **Connect using:** and get the IP address listed for **Wi-Fi**. + +2. On the **Project setting** > **General settings** page, in **Remote device IP address**, enter the IP address for the test mobile device, using `https://`. + +3. Click **Pair**. + + ![Pair](images/ld-pair.png) + + **Connect to remote device** appears. + +4. On the mobile device, under **Device discovery**, tap **Pair**. A case-sensitive code is displayed. + +5. On the PC, in **Connect to remote device**, enter the code from the mobile device. + +6. Next, click **Sync** to pull information from the device in to Lockdown Designer. + + ![Sync](images/ld-sync.png) + +7. Click the **Save** icon and enter a name for your project. + +**Using a USB cable** + +1. Open Lockdown Designer. + +2. Click **Create new project**. + +2. Connect a Windows 10 Mobile device to the PC by USB and unlock the device. + +3. On the **Project setting** > **General settings** page, click **Pair**. + + ![Pair](images/ld-pair.png) + + **Connect to remote device** appears. + +4. On the mobile device, under **Device discovery**, tap **Pair**. A case-sensitive code is displayed. + +5. On the PC, in **Connect to remote device**, enter the code from the mobile device. + +6. Next, click **Sync** to pull information from the device in to Lockdown Designer. + + ![Sync](images/ld-sync.png) + +7. Click the **Save** icon and enter a name for your project. + + +## Configure your lockdown XML settings + +The apps and settings available in the pages of Lockdown Designer should now be populated from the test mobile device. The following table describes what you can configure on each page. + +| Page | Description | +| --- | --- | +| ![Applications](images/ld-apps.png) | Each app from the test mobile device is listed. Select the apps that you want visible to users.

You can select an app to run automatically when a user signs in to the device. The **Select Auto-Run** menu is populated by the apps that you select to allow on the device. | +| ![CSP Runner](images/ld-csp.png) | CSPRunner enables you to include settings and policies that are not defined in other sections of the app. To make use of CSPRunner, you must create the SyncML block that contains the settings, and then import the SyncML in Lockdown Designer. [Learn how to use CSPRunner and author SyncML.](lockdown-xml.md#csprunner) | +| ![Settings](images/ld-settings.png) | On this page, you select the settings that you want visible to users. See the [ms settings: URI scheme reference](https://docs.microsoft.com/windows/uwp/launch-resume/launch-settings-app#ms-settings-uri-scheme-reference) to see which Settings page maps to a URI. | +| ![Quick actions](images/ld-quick.png) | On this page, you select the settings that you want visible to users. | +| ![Buttons](images/ld-buttons.png) | Each hardware button on a mobile device has different actions that can be disabled. In addition, the behavior for **Search** button can be changed to open an app other than **Search**.

Some devices may have additional hardware buttons provided by the OEM. These are listed as Custom1, Custom2, and Custom3. If your device has custom hardware buttons, contact your equipment provider to identify how their custom buttons are defined. | +| ![Other settings](images/ld-other.png) | This page contains several settings that you can configure:

- The context menu is displayed when a user presses and holds an application in the All Apps list. You can enable or disable the context menu.

- Tile manipulation allows users to pin, unpin, move, and resize tiles on the Start screen. You can enable or disable tile manipulation.

- The Action Center setting controls whether the user can open the Action Center on the device. When the Action Center is disabled, notifications on the lockscreen and toasts are also disabled. You can use optional attributes with the Action Center element to change that behavior for either notifications, toasts, or both. | +| ![Start screen](images/ld-start.png) | On this page, you can start a remote simulation session with the test mobile device. Click **Start remote simulation**. You will see a **Start screen remote simulation in progress** message on the PC. (If the **Start remote simulation** button is not active, [pair the mobile device with the PC again](#pair).)

On the test mobile device, tiles for the apps that you allowed on the **Applications** page are displayed on the screen. You can move, resize, or unpin these tiles to achieve the desired layout.

When you are done changing the layout on the test mobile device, click **Accept** on the PC. | + + +## Validate and export + +On the **Validate and export** page, click **Validate** to make sure your lockdown XML is valid. + +>[!WARNING] +>Lockdown Designer cannot validate SyncML that you imported to CSPRunner. + +Click **Export** to generate the XML file for your project. You can select the location to save the file. + +## Create and configure multiple roles + +You can create additional roles for the device and have unique configurations for each role. For example, you could have one configuration for a **Manager** role and a different configuration for a **Salesperson** role. + +>[!NOTE] +>Using multiple roles on a device requires a login application that displays the list of roles and allows users to sign in to Azure Active Directory. [Learn how to create a login application that will work with your Lockdown XML file.](https://github.com/Microsoft/Windows-universal-samples/tree/master/Samples/DeviceLockdownAzureLogin) + +**For each role:** + +1. On the **Project setting** page, click **Role management**. + +2. Click **Add a role**. + +3. Enter a name for the role, and then click **Save**. + +4. Configure the settings for the role as above, but make sure on each page that you select the correct role. + + ![Current role selection box](images/ld-role.png) + + diff --git a/windows/configure/provision-pcs-for-initial-deployment.md b/windows/configure/provision-pcs-for-initial-deployment.md index 86c8e234ff..c23f3d854c 100644 --- a/windows/configure/provision-pcs-for-initial-deployment.md +++ b/windows/configure/provision-pcs-for-initial-deployment.md @@ -10,14 +10,14 @@ author: jdeckerMS localizationpriority: high --- -# Provision PCs with common settings for initial deployment (simple provisioning) +# Provision PCs with common settings for initial deployment (desktop wizard) **Applies to** - Windows 10 -This topic explains how to create and apply a simple provisioning package that contains common enterprise settings to a device running all desktop editions of Windows 10 except Windows 10 Home. +This topic explains how to create and apply a provisioning package that contains common enterprise settings to a device running all desktop editions of Windows 10 except Windows 10 Home. You can apply a provisioning package on a USB drive to off-the-shelf devices during setup, making it fast and easy to configure new devices. @@ -32,66 +32,59 @@ You can apply a provisioning package on a USB drive to off-the-shelf devices dur [Learn more about the benefits and uses of provisioning packages.](provisioning-packages.md) -## What does simple provisioning do? +## What does the desktop wizard do? -In a simple provisioning package, you can configure: +The desktop wizard helps you configure the following settings in a provisioning package: -- Device name -- Upgraded product edition -- Wi-Fi network -- Active Directory enrollment -- Local administrator account +- Set device name +- Upgrade product edition +- Configure the device for shared use +- Remove pre-installed software +- Configure Wi-Fi network +- Enroll device in Active Directory or Azure Active Directory +- Create local administrator account +- Add applications and certificates -Provisioning packages can include management instructions and policies, installation of specific apps, customization of network connections and policies, and more. To learn about provisioning packages that include more than the settings in a simple provisioning package, see [Provision PCs with apps and certificates](provision-pcs-with-apps-and-certificates.md). +>[!WARNING] +>You must run Windows Configuration Designer on Windows 10 to configure Azure Active Directory enrollment using any of the wizards. + +Provisioning packages can include management instructions and policies, installation of specific apps, customization of network connections and policies, and more. > [!TIP] -> Use simple provisioning to create a package with the common settings, then switch to the advanced editor to add other settings, apps, policies, etc. - -![open advanced editor](images/icd-simple-edit.png) +> Use the desktop wizard to create a package with the common settings, then switch to the advanced editor to add other settings, apps, policies, etc. +> +>![open advanced editor](images/icd-simple-edit.png) ## Create the provisioning package -Use the Windows Imaging and Configuration Designer (ICD) tool included in the Windows Assessment and Deployment Kit (ADK) for Windows 10 to create a provisioning package. [Install the ADK and select **Configuration Designer**.](https://developer.microsoft.com/windows/hardware/windows-assessment-deployment-kit) +Use the Windows Configuration Designer tool to create a provisioning package. [Learn how to install Windows Configuration Designer.](provisioning-install-icd.md) -1. Open Windows ICD (by default, %windir%\Program Files (x86)\Windows Kits\10\Assessment and Deployment Kit\Imaging and Configuration Designer\x86\ICD.exe). +1. Open Windows Configuration Designer (by default, %windir%\Program Files (x86)\Windows Kits\10\Assessment and Deployment Kit\Imaging and Configuration Designer\x86\ICD.exe). -2. Click **Simple provisioning**. +2. Click **Provision desktop devices**. - ![ICD start options](images/icdstart-option.png) + ![ICD start options](images/icd-create-options-1703.png) -3. Name your project and click **Finish**. The screens for simple provisioning will walk you through the following steps. - - ![ICD simple provisioning](images/icd-simple.png) - -4. In the **Set up device** step, enter a unique 15-character name for the device. For help generating a unique name, you can use %SERIAL%, which includes a hardware-specific serial number, or you can use %RAND:x%, which generates random characters of x length. - -5. (*Optional*) You can upgrade the following editions of Windows 10 by providing a product key for the edition to upgrade to. - - Pro to Education - - Pro to Enterprise - - Enterprise to Education - -6. Click **Set up network**. - -7. Toggle **On** or **Off** for wireless network connectivity. If you select **On**, enter the SSID, type, and (if required) password for the wireless network. - -8. Click **Enroll into Active Directory**. - -9. Toggle **Yes** or **No** for Active Directory enrollment. If you select **Yes**, enter the credentials for an account with permissions to enroll the device. (*Optional*) Enter a user name and password to create a local administrator account. - - > **Warning**: If you don't create a local administrator account and the device fails to enroll in Active Directory for any reason, you will have to reimage the device and start over. As a best practice, we recommend: - - Use a least-privileged domain account to join the device to the domain. - - Create a temporary administrator account to use for debugging or reprovisioning if the device fails to enroll successfully. - - [Use Group Policy to delete the temporary administrator account](https://blogs.technet.microsoft.com/canitpro/2014/12/10/group-policy-creating-a-standard-local-admin-account/) after the device is enrolled in Active Directory. - -10. Click **Finish**. - -11. Review your settings in the summary. You can return to previous pages to change your selections. Then, under **Protect your package**, toggle **Yes** or **No** to encrypt the provisioning package. If you select **Yes**, enter a password. This password must be entered to apply the encrypted provisioning package. - -12. Click **Create**. +3. Name your project and click **Finish**. The pages for desktop provisioning will walk you through the following steps. + ![ICD desktop provisioning](images/icd-desktop-1703.png) + > [!IMPORTANT] > When you build a provisioning package, you may include sensitive information in the project files and in the provisioning package (.ppkg) file. Although you have the option to encrypt the .ppkg file, project files are not encrypted. You should store the project files in a secure location and delete the project files when they are no longer needed. +## Configure settings + + + + + + + + + +
![step one](images/one.png)![set up device](images/set-up-device.png)

Enter a name for the device.

(Optional) Select a license file to upgrade Windows 10 to a different edition. [See the permitted upgrades.](https://technet.microsoft.com/itpro/windows/deploy/windows-10-edition-upgrades)

Toggle **Yes** or **No** to **Configure devices for shared use**. This setting optimizes Windows 10 for shared use scenarios. [Learn more about shared PC configuration.](set-up-shared-or-guest-pc.md)

You can also select to remove pre-installed software from the device. 		![device name, upgrade to enterprise, shared use, remove pre-installed software](images/set-up-device-details-desktop.png)
![step two](images/two.png) ![set up network](images/set-up-network.png)

Toggle **On** or **Off** for wireless network connectivity. If you select **On**, enter the SSID, the network type (**Open** or **WPA2-Personal**), and (if **WPA2-Personal**) the password for the wireless network.		![Enter network SSID and type](images/set-up-network-details-desktop.png)
![step three](images/three.png) ![account management](images/account-management.png)

Enable account management if you want to configure settings on this page.

You can enroll the device in Active Directory, enroll in Azure Active Directory, or create a local administrator account on the device

To enroll the device in Active Directory, enter the credentials for a least-privileged user account to join the device to the domain.

Before you use a Windows Configuration Designer wizard to configure bulk Azure AD enrollment, [set up Azure AD join in your organization](https://docs.microsoft.com/azure/active-directory/active-directory-azureadjoin-setup). The **maximum number of devices per user** setting in your Azure AD tenant determines how many times the bulk token that you get in the wizard can be used. To enroll the device in Azure AD, select that option and enter a friendly name for the bulk token you will get using the wizard. Set an expiration date for the token (maximum is 30 days from the date you get the token). Click **Get bulk token**. In the **Let's get you signed in** window, enter an account that has permissions to join a device to Azure AD, and then the password. Click **Accept** to give Windows Configuration Designer the necessary permissions.

To create a local administrator account, select that option and enter a user name and password.

**Important:** If you create a local account in the provisioning package, you must change the password using the **Settings** app every 42 days. If the password is not changed during that period, the account might be locked out and unable to sign in. 		![join Active Directory, Azure AD, or create a local admin account](images/account-management-details.png)
![step four](images/four.png) ![add applications](images/add-applications.png)

You can install multiple applications, both Classic Windows (Win32) apps and Universal Windows Platform (UWP) apps, in a provisioning package. The settings in this step vary according to the application that you select. For help with the settings, see [Provision PCs with apps](provision-pcs-with-apps.md). 		![add an application](images/add-applications-details.png)
![step five](images/five.png) ![add certificates](images/add-certificates.png)

To provision the device with a certificate, click **Add a certificate**. Enter a name for the certificate, and then browse to and select the certificate to be used.		![add a certificate](images/add-certificates-details.png)
![finish](images/finish.png)

You can set a password to protect your provisioning package. You must enter this password when you apply the provisioning package to a device.		![Protect your package](images/finish-details.png)
+ +After you're done, click **Create**. It only takes a few seconds. When the package is built, the location where the package is stored is displayed as a hyperlink at the bottom of the page. **Next step**: [How to apply a provisioning package](provisioning-apply-package.md) @@ -107,14 +100,15 @@ Use the Windows Imaging and Configuration Designer (ICD) tool included in the Wi - [Provisioning packages for Windows 10](provisioning-packages.md) - [How provisioning works in Windows 10](provisioning-how-it-works.md) -- [Install Windows Imaging and Configuration Designer](provisioning-install-icd.md) +- [Install Windows Configuration Designer](provisioning-install-icd.md) - [Create a provisioning package](provisioning-create-package.md) - [Apply a provisioning package](provisioning-apply-package.md) - [Settings changed when you uninstall a provisioning package](provisioning-uninstall-package.md) -- [Provision PCs with apps and certificates for initial deployments (advanced provisioning)](provision-pcs-with-apps-and-certificates.md) - [Use a script to install a desktop app in provisioning packages](provisioning-script-to-install-app.md) +- [PowerShell cmdlets for provisioning Windows 10 (reference)](provisioning-powershell.md) - [NFC-based device provisioning](provisioning-nfc.md) -- [Windows ICD command-line interface (reference)](provisioning-command-line.md) +- [Use the package splitter tool](provisioning-package-splitter.md) +- [Windows Configuration Designer command-line interface (reference)](provisioning-command-line.md) - [Create a provisioning package with multivariant settings](provisioning-multivariant.md) diff --git a/windows/configure/provision-pcs-with-apps-and-certificates.md b/windows/configure/provision-pcs-with-apps-and-certificates.md index 6e4614a977..b5e03dbb14 100644 --- a/windows/configure/provision-pcs-with-apps-and-certificates.md +++ b/windows/configure/provision-pcs-with-apps-and-certificates.md @@ -17,6 +17,7 @@ localizationpriority: high - Windows 10 +DEPRECATED - See [Provision PCs with apps](provision-pcs-with-apps.md) This topic explains how to create and apply a provisioning package that contains apps and certificates to a device running all desktop editions of Windows 10 except Windows 10 Home. Provisioning packages can include management instructions and policies, installation of specific apps, customization of network connections and policies, and more. @@ -183,14 +184,15 @@ If your build is successful, the name of the provisioning package, output direct - [Provisioning packages for Windows 10](provisioning-packages.md) - [How provisioning works in Windows 10](provisioning-how-it-works.md) -- [Install Windows Imaging and Configuration Designer](provisioning-install-icd.md) +- [Install Windows Configuration Designer](provisioning-install-icd.md) - [Create a provisioning package](provisioning-create-package.md) - [Apply a provisioning package](provisioning-apply-package.md) - [Settings changed when you uninstall a provisioning package](provisioning-uninstall-package.md) - [Provision PCs with common settings for initial deployment (simple provisioning)](provision-pcs-for-initial-deployment.md) - [Use a script to install a desktop app in provisioning packages](provisioning-script-to-install-app.md) - [NFC-based device provisioning](provisioning-nfc.md) -- [Windows ICD command-line interface (reference)](provisioning-command-line.md) +- [Use the package splitter tool](provisioning-package-splitter.md) +- [Windows Configuration Designer command-line interface (reference)](provisioning-command-line.md) - [Create a provisioning package with multivariant settings](provisioning-multivariant.md) diff --git a/windows/configure/provision-pcs-with-apps.md b/windows/configure/provision-pcs-with-apps.md new file mode 100644 index 0000000000..2314c30c16 --- /dev/null +++ b/windows/configure/provision-pcs-with-apps.md @@ -0,0 +1,207 @@ +--- +title: Provision PCs with apps (Windows 10) +description: Add apps to a Windows 10 provisioning package. +ms.assetid: 66D14E97-E116-4218-8924-E2A326C9367E +keywords: ["runtime provisioning", "provisioning package"] +ms.prod: W10 +ms.mktglfcycl: deploy +ms.sitesec: library +author: jdeckerMS +localizationpriority: high +--- + +# Provision PCs with apps + + +**Applies to** + +- Windows 10 + + +In Windows 10, version 1703, you can install multiple Universal Windows Platform (UWP) apps and Classic Windows (Win32) applications in a provisioning package. This topic explains the various settings in [Windows Configuration Designer](provisioning-install-icd.md) for app install. + +When you add an app in a Windows Configuration Designer wizard, the appropriate settings are displayed based on the app that you select. For instructions on adding an app using the advanced editor in Windows Configuration Designer, see [Add an app using advanced editor](#adv). + +## Settings for UWP apps + +- **License Path**: Specify the license file if it is an app from the Windows Store. This is optional if you have a certificate for the app. + +- **Package family name**: Specify the package family name if you don’t specify a license. This field will be auto-populated after you specify a license. + +- **Required appx dependencies**: Specify the appx dependency packages that are required for the installation of the app + +## Settings for Classic Windows apps + +### MSI installer + +- **Command line arguments**: Optionally, append additional command arguments. The silent flag is appended for you. Example: PROPERTY=VALUE + +- **Continue installations after failure**: Optionally, specify if you want to continue installing additional apps if this app fails to install + +- **Restart required**: Optionally, specify if you want to initiate a reboot after a successful install of this app + +- **Required win32 app dependencies**: Optionally, specify additional files that are required for the installation of the app. + +### Exe or other installer + +- **Command line arguments**: Append the command line arguments with a silent flag (required). Optionally, append additional flags + +- **Return Codes**: Specify the return codes for success and success with restart (0 and 3010 by default respectively) Any return code that is not listed will be interpreted as failure. The text boxes are space delimited. + +- **Continue installations after failure**: Optionally, specify if you want to continue installing additional apps if this app fails to install + +- **Restart required**: Optionally, specify if you want to initiate a reboot after a successful install of this app + +- **Required win32 app dependencies**: Optionally, specify additional files that are required for the installation of the app. + + + +## Add an app using advanced editor in Windows Configuration Designer + + +1. In the **Available customizations** pane, go to **Runtime settings** > **ProvisioningCommands** > **DeviceContext** > **CommandFiles**. + +2. Add all the files required for the app install, including the data files and the installer. + +3. Go to **Runtime settings** > **ProvisioningCommands** > **DeviceContext** > **CommandLine** and specify the command line that needs to be executed to install the app. This is a single command line (such as a script, executable, or msi) that triggers a silent install of your CommandFiles. Note that the install must execute silently (without displaying any UI). For MSI installers use, the `msiexec /quiet` option. + +> [!NOTE] +> If you are installing more than one app, then use `CommandLine` to invoke the script or batch file that orchestrates installation of the files. For more information, see [Use a script to install a desktop app in provisioning packages](provisioning-script-to-install-app.md). + + +### Add a universal app to your package + +Universal apps that you can distribute in the provisioning package can be line-of-business (LOB) apps developed by your organization, Windows Store for Business apps that you acquire with [offline licensing](../manage/acquire-apps-windows-store-for-business.md), or third-party apps. This procedure will assume you are distributing apps from the Windows Store for Business. For other apps, obtain the necessary information (such as the package family name) from the app developer. + +1. In the **Available customizations** pane, go to **Runtime settings** > **UniversalAppInstall**. + +2. For **DeviceContextApp**, specify the **PackageFamilyName** for the app. In Windows Store for Business, the package family name is listed in the **Package details** section of the download page. + + ![details for offline app package](images/uwp-family.png) + +3. For **ApplicationFile**, click **Browse** to find and select the target app (either an \*.appx or \*.appxbundle). + +4. For **DependencyAppxFiles**, click **Browse** to find and add any dependencies for the app. In Windows Store for Business, any dependencies for the app are listed in the **Required frameworks** section of the download page. + + ![required frameworks for offline app package](images/uwp-dependencies.png) + +5. For **DeviceContextAppLicense**, enter the **LicenseProductID**. + + - In Windows Store for Business, generate the unencoded license for the app on the app's download page, and change the extension of the license file from **.xml** to **.ms-windows-store-license**. + + ![generate license for offline app](images/uwp-license.png) + + - Open the license file and search for **LicenseID=** to get the GUID, enter the GUID in the **LicenseProductID** field and click **Add**. + +6. In the **Available customizations** pane, click the **LicenseProductId** that you just added. + +7. For **LicenseInstall**, click **Browse**, navigate to the license file that you renamed **.**ms-windows-store-license**, and select the license file. + +[Learn more about distributing offline apps from the Windows Store for Business.](../manage/distribute-offline-apps.md) + +> [!NOTE] +> Removing a provisioning package will not remove any apps installed by device context in that provisioning package. + + + +### Add a certificate to your package + +1. In the **Available customizations** pane, go to **Runtime settings** > **Certificates** > **ClientCertificates**. + +2. Enter a **CertificateName** and then click **Add**. + +2. Enter the **CertificatePassword**. + +3. For **CertificatePath**, browse and select the certificate to be used. + +4. Set **ExportCertificate** to **False**. + +5. For **KeyLocation**, select **Software only**. + + +### Add other settings to your package + +For details about the settings you can customize in provisioning packages, see [Windows Provisioning settings reference]( https://go.microsoft.com/fwlink/p/?LinkId=619012). + +### Build your package + +1. When you are done configuring the provisioning package, on the **File** menu, click **Save**. + +2. Read the warning that project files may contain sensitive information, and click **OK**. +> **Important** When you build a provisioning package, you may include sensitive information in the project files and in the provisioning package (.ppkg) file. Although you have the option to encrypt the .ppkg file, project files are not encrypted. You should store the project files in a secure location and delete the project files when they are no longer needed. + +3. On the **Export** menu, click **Provisioning package**. + +1. Change **Owner** to **IT Admin**, which will set the precedence of this provisioning package higher than provisioning packages applied to this device from other sources, and then select **Next.** + +10. Set a value for **Package Version**. + + > [!TIP]   + > You can make changes to existing packages and change the version number to update previously applied packages. + +11. Optional. In the **Provisioning package security** window, you can choose to encrypt the package and enable package signing. + + - **Enable package encryption** - If you select this option, an auto-generated password will be shown on the screen. + + - **Enable package signing** - If you select this option, you must select a valid certificate to use for signing the package. You can specify the certificate by clicking **Select...** and choosing the certificate you want to use to sign the package. + + **Important**   + We recommend that you include a trusted provisioning certificate in your provisioning package. When the package is applied to a device, the certificate is added to the system store and any package signed with that certificate thereafter can be applied silently.  + +12. Click **Next** to specify the output location where you want the provisioning package to go once it's built. By default, Windows ICD uses the project folder as the output location.

+Optionally, you can click **Browse** to change the default output location. + +13. Click **Next**. + +14. Click **Build** to start building the package. The project information is displayed in the build page and the progress bar indicates the build status.

+If you need to cancel the build, click **Cancel**. This cancels the current build process, closes the wizard, and takes you back to the **Customizations Page**. + +15. If your build fails, an error message will show up that includes a link to the project folder. You can scan the logs to determine what caused the error. Once you fix the issue, try building the package again.

+If your build is successful, the name of the provisioning package, output directory, and project directory will be shown. + + - If you choose, you can build the provisioning package again and pick a different path for the output package. To do this, click **Back** to change the output package name and path, and then click **Next** to start another build. + + - If you are done, click **Finish** to close the wizard and go back to the **Customizations Page**. + +16. Select the **output location** link to go to the location of the package. You can provide that .ppkg to others through any of the following methods: + + - Shared network folder + + - SharePoint site + + - Removable media (USB/SD) + + - Email + + - USB tether (mobile only) + + - NFC (mobile only) + + + +**Next step**: [How to apply a provisioning package](provisioning-apply-package.md) + +## Learn more + +- Watch the video: [Provisioning Windows 10 Devices with New Tools](https://go.microsoft.com/fwlink/p/?LinkId=615921) + +- Watch the video: [Windows 10 for Mobile Devices: Provisioning Is Not Imaging](https://go.microsoft.com/fwlink/p/?LinkId=615922) +  + +## Related topics + +- [Provisioning packages for Windows 10](provisioning-packages.md) +- [How provisioning works in Windows 10](provisioning-how-it-works.md) +- [Install Windows Configuration Designer](provisioning-install-icd.md) +- [Create a provisioning package](provisioning-create-package.md) +- [Apply a provisioning package](provisioning-apply-package.md) +- [Settings changed when you uninstall a provisioning package](provisioning-uninstall-package.md) +- [Provision PCs with common settings for initial deployment (simple provisioning)](provision-pcs-for-initial-deployment.md) +- [Use a script to install a desktop app in provisioning packages](provisioning-script-to-install-app.md) +- [PowerShell cmdlets for provisioning Windows 10 (reference)](provisioning-powershell.md) +- [NFC-based device provisioning](provisioning-nfc.md) +- [Use the package splitter tool](provisioning-package-splitter.md) +- [Windows Configuration Designer command-line interface (reference)](provisioning-command-line.md) +- [Create a provisioning package with multivariant settings](provisioning-multivariant.md) + + diff --git a/windows/configure/provisioning-apply-package.md b/windows/configure/provisioning-apply-package.md index 1125dd6985..2fa9efb09a 100644 --- a/windows/configure/provisioning-apply-package.md +++ b/windows/configure/provisioning-apply-package.md @@ -42,25 +42,7 @@ Provisioning packages can be applied to a device during the first-run experience ![Do you trust this package?](images/trust-package.png) -6. Read and accept the Microsoft Software License Terms. - ![Sign in](images/license-terms.png) - -7. Select **Use Express settings**. - - ![Get going fast](images/express-settings.png) - -8. If the PC doesn't use a volume license, you'll see the **Who owns this PC?** screen. Select **My work or school owns it** and tap **Next**. - - ![Who owns this PC?](images/who-owns-pc.png) - -9. On the **Choose how you'll connect** screen, select **Join Azure AD** or **Join a domain** and tap **Next**. - - ![Connect to Azure AD](images/connect-aad.png) - -10. Sign in with your domain, Azure AD, or Office 365 account and password. When you see the progress ring, you can remove the USB drive. - - ![Sign in](images/sign-in-prov.png) ### After setup, from a USB drive, network folder, or SharePoint site @@ -97,23 +79,17 @@ On a desktop computer, navigate to **Settings** > **Accounts** > **Access work o -## Learn more - -- Watch the video: [Provisioning Windows 10 Devices with New Tools](https://go.microsoft.com/fwlink/p/?LinkId=615921) - -- Watch the video: [Windows 10 for Mobile Devices: Provisioning Is Not Imaging](https://go.microsoft.com/fwlink/p/?LinkId=615922) ## Related topics - [Provisioning packages for Windows 10](provisioning-packages.md) - [How provisioning works in Windows 10](provisioning-how-it-works.md) -- [Install Windows Imaging and Configuration Designer](provisioning-install-icd.md) +- [Install Windows Configuration Designer](provisioning-install-icd.md) - [Create a provisioning package](provisioning-create-package.md) - [Settings changed when you uninstall a provisioning package](provisioning-uninstall-package.md) - [Provision PCs with common settings for initial deployment (simple provisioning)](provision-pcs-for-initial-deployment.md) -- [Provision PCs with apps and certificates for initial deployments (advanced provisioning)](provision-pcs-with-apps-and-certificates.md) - [Use a script to install a desktop app in provisioning packages](provisioning-script-to-install-app.md) -- [NFC-based device provisioning](provisioning-nfc.md) -- [Windows ICD command-line interface (reference)](provisioning-command-line.md) +- [PowerShell cmdlets for provisioning Windows 10 (reference)](provisioning-powershell.md) +- [Windows Configuration Designer command-line interface (reference)](provisioning-command-line.md) - [Create a provisioning package with multivariant settings](provisioning-multivariant.md) \ No newline at end of file diff --git a/windows/configure/provisioning-command-line.md b/windows/configure/provisioning-command-line.md index d5c52aabac..a2e16343b0 100644 --- a/windows/configure/provisioning-command-line.md +++ b/windows/configure/provisioning-command-line.md @@ -1,5 +1,5 @@ --- -title: Windows ICD command-line interface (Windows 10) +title: Windows Configuration Designer command-line interface (Windows 10) description: ms.prod: w10 ms.mktglfcycl: deploy @@ -8,7 +8,7 @@ author: jdeckerMS localizationpriority: high --- -# Windows ICD command-line interface (reference) +# Windows Configuration Designer command-line interface (reference) **Applies to** @@ -16,11 +16,11 @@ localizationpriority: high - Windows 10 - Windows 10 Mobile -You can use the Windows Imaging and Configuration Designer (ICD) command-line interface (CLI) to automate the building of provisioning packages and Windows 10 for desktop editions (Home, Pro, Enterprise, and Education) and Windows 10 Mobile or Windows 10 IoT Core (IoT Core) images. +You can use the Windows Configuration Designer command-line interface (CLI) to automate the building of provisioning packages and Windows 10 for desktop editions (Home, Pro, Enterprise, and Education) and Windows 10 Mobile or Windows 10 IoT Core (IoT Core) images. -- IT pros can use the Windows ICD CLI to require less re-tooling of existing processes. You must run the Windows ICD CLI from a command window with administrator privileges. +- IT pros can use the Windows Configuration Designer CLI to require less re-tooling of existing processes. You must run the Windows Configuration Designer CLI from a command window with administrator privileges. -- You must use the Windows ICD CLI and edit the customizations.xml sources to create an image and/or provisioning package with multivariant support. You need the customizations.xml file as one of the inputs to the Windows ICD CLI to build a provisioning package. For more information, see [Create a provisioning package with multivariant settings](provisioning-multivariant.md). +- You must use the Windows Configuration Designer CLI and edit the customizations.xml sources to create an image and/or provisioning package with multivariant support. You need the customizations.xml file as one of the inputs to the Windows Configuration Designer CLI to build a provisioning package. For more information, see [Create a provisioning package with multivariant settings](provisioning-multivariant.md). @@ -38,9 +38,9 @@ icd.exe /Build-ProvisioningPackage /CustomizationXML: /PackagePath: | --- | --- | --- | | /CustomizationXML | No | Specifies the path to a Windows provisioning XML file that contains the customization assets and settings. For more information, see Windows provisioning answer file. | | /PackagePath | Yes | Specifies the path and the package name where the built provisioning package will be saved. | -| /StoreFile | No


See Important note. | For partners using a settings store other than the default store(s) used by Windows ICD, use this parameter to specify the path to one or more comma-separated Windows settings store file. By default, if you don't specify a settings store file, the settings store that's common to all Windows editions will be loaded by Windows ICD.


**Important** If you use this parameter, you must not use /MSPackageRoot or /OEMInputXML. | +| /StoreFile | No


See Important note. | For partners using a settings store other than the default store(s) used by Windows Configuration Designer, use this parameter to specify the path to one or more comma-separated Windows settings store file. By default, if you don't specify a settings store file, the settings store that's common to all Windows editions will be loaded by Windows Configuration Designer.


**Important** If you use this parameter, you must not use /MSPackageRoot or /OEMInputXML. | | /Variables | No | Specifies a semicolon separated and macro pair. The format for the argument must be =. | -| Encrypted | No | Denotes whether the provisioning package should be built with encryption. Windows ICD auto-generates the decryption password and includes this information in the output.


Precede with + for encryption or - for no encryption. The default is no encryption. | +| Encrypted | No | Denotes whether the provisioning package should be built with encryption. Windows Configuration Designer auto-generates the decryption password and includes this information in the output.


Precede with + for encryption or - for no encryption. The default is no encryption. | | Overwrite | No | Denotes whether to overwrite an existing provisioning package.


Precede with + to overwrite an existing package or - if you don't want to overwrite an existing package. The default is false (don't overwrite). | | /? | No | Lists the switches and their descriptions for the command-line tool or for certain commands. | @@ -51,14 +51,13 @@ icd.exe /Build-ProvisioningPackage /CustomizationXML: /PackagePath: - [Provisioning packages for Windows 10](provisioning-packages.md) - [How provisioning works in Windows 10](provisioning-how-it-works.md) -- [Install Windows Imaging and Configuration Designer](provisioning-install-icd.md) +- [Install Windows Configuration Designer](provisioning-install-icd.md) - [Create a provisioning package](provisioning-create-package.md) - [Apply a provisioning package](provisioning-apply-package.md) - [Settings changed when you uninstall a provisioning package](provisioning-uninstall-package.md) - [Provision PCs with common settings for initial deployment (simple provisioning)](provision-pcs-for-initial-deployment.md) -- [Provision PCs with apps and certificates for initial deployments (advanced provisioning)](provision-pcs-with-apps-and-certificates.md) - [Use a script to install a desktop app in provisioning packages](provisioning-script-to-install-app.md) -- [NFC-based device provisioning](provisioning-nfc.md) +- [PowerShell cmdlets for provisioning Windows 10 (reference)](provisioning-powershell.md) - [Create a provisioning package with multivariant settings](provisioning-multivariant.md)   diff --git a/windows/configure/provisioning-configure-mobile.md b/windows/configure/provisioning-configure-mobile.md index 55a100ecdd..5c1a5048cf 100644 --- a/windows/configure/provisioning-configure-mobile.md +++ b/windows/configure/provisioning-configure-mobile.md @@ -1,7 +1,7 @@ --- -title: provisioning mobile (Windows 10) +title: Use Windows Configuration Designer to configure Windows 10 Mobile devices (Windows 10) description: -keywords: Windows 10, MDM, WSUS, Windows update +keywords: phone, handheld, lockdown, customize ms.prod: w10 ms.mktglfcycl: manage ms.sitesec: library @@ -10,5 +10,77 @@ localizationpriority: high author: jdeckerMS --- -# provisioning mobile +# Use Windows Configuration Designer to configure Windows 10 Mobile devices +Windows provisioning makes it easy for IT administrators to configure end-user devices without imaging. Using provisioning packages, ayou can easily specify desired configuration, settings, and information required to enroll the devices into management, and then apply that configuration to target devices in a matter of minutes. + +A provisioning package (.ppkg) is a container for a collection of configuration settings. Using Windows Configuration Designer, you can create provisioning packages that let you quickly and efficiently configure a device without having to install a new image. + +Windows Configuration Designer can be installed from the [Windows Assessment and Deployment Kit (ADK) for Windows 10](https://developer.microsoft.com/windows/hardware/windows-assessment-deployment-kit). Windows Configuration Designer is also available as an app in the Windows Store. [Learn more about installing Windows Configuration Designer.](provisioning-install-icd.md) + +## Create a provisioning package using the wizard + +The **Provision Windows mobile devices** wizard lets you configure common settings for devices running Windows 10 Mobile in a simple, graphical workflow. + +### Start a new project + +1. Open Windows Configuration Designer: + - From either the Start screen or Start menu search, type 'Windows Configuration Designer' and click the Windows Configuration Designer shortcut, + + or + + - If you installed Windows Configuration Designer from the ADK, navigate to `C:\Program Files (x86)\Windows Kits\10\Assessment and Deployment Kit\Imaging and Configuration Designer\x86` (on an x64 computer) or `C:\Program Files\Windows Kits\10\Assessment and Deployment Kit\Imaging and Configuration Designer\x86\ICD.exe` (on an x86 computer), and then double-click **ICD.exe**. + +2. On the **Start** page, choose **Provision Windows mobile devices**. + +3. Enter a name for your project, and then click **Next**. + + +### Configure settings in the wizard + + + + + + +
![step one](images/one.png)![set up device](images/set-up-device-mobile.png)

Enter a device name.

Optionally, you can enter a product key to upgrade the device from Windows 10 Mobile to Windows 10 Mobile Enterprise. 		![device name, upgrade license](images/set-up-device-details-mobile.png)
![step two](images/two.png) ![set up network](images/set-up-network-mobile.png)

Toggle **On** or **Off** for wireless network connectivity.

If you select **On**, enter the SSID, network type (**Open** or **WPA2-Personal**), and (if **WPA2-Personal**) the password for the wireless network.		![Enter network SSID and type](images/set-up-network-details-mobile.png)
![step three](images/three.png) ![bulk enrollment in Azure Active Directory](images/bulk-enroll-mobile.png)

Before you use a Windows Configuration Designer wizard to configure bulk Azure AD enrollment, [set up Azure AD join in your organization](https://docs.microsoft.com/azure/active-directory/active-directory-azureadjoin-setup). The **maximum number of devices per user** setting in your Azure AD tenant determines how many times the bulk token that you get in the wizard can be used.

Set an expiration date for the token (maximum is 30 days from the date you get the token). Click **Get bulk token**. In the **Let's get you signed in** window, enter an account that has permissions to join a device to Azure AD, and then the password. Click **Accept** to give Windows Configuration Designer the necessary permissions.

**Warning:** You must run Windows Configuration Designer on Windows 10 to configure Azure Active Directory enrollment using any of the wizards. 		![Enter expiration and get bulk token](images/bulk-enroll-mobile-details.png)
![step four](images/four.png) ![finish](images/finish-mobile.png)

You can set a password to protect your provisioning package. You must enter this password when you apply the provisioning package to a device.		![Protect your package](images/finish-details-mobile.png)
+ +After you're done, click **Create**. It only takes a few seconds. When the package is built, the location where the package is stored is displayed as a hyperlink at the bottom of the page. + +### Apply provisioning package + +You can apply a provisioning package to a device running Windows 10 Mobile by using: + +- removable media +- copying the provisioning package to the device +- [NFC tags](provisioning-nfc.md) +- [barcodes](provisioning-package-splitter.md) + +### Using removable media + +1. Insert an SD card containing the provisioning package into the device. +2. Navigate to **Settings** > **Accounts** > **Access work or school** > **Add or remove a provisioning package** > **Add a package**, and select the package to install. + + ![add a package option](images/packages-mobile.png) + +3. Click **Add**. + +4. On the device, the **Is this package from a source you trust?** message will appear. Tap **Yes, add it**. + + ![Is this package from a source you trust](images/package-trust.png) + +### Copying the provisioning package to the device + +1. Connect the device to your PC through USB. + +2. On the PC, select the provisioning package that you want to use to provision the device and then drag and drop the file to your device. + +3. On the device, the **Is this package from a source you trust?** message will appear. Tap **Yes, add it**. + + ![Is this package from a source you trust](images/package-trust.png) + + +## Related topics + +- [NFC-based device provisioning](provisioning-nfc.md) +- [Use the package splitter tool](provisioning-package-splitter.md) \ No newline at end of file diff --git a/windows/configure/provisioning-create-package.md b/windows/configure/provisioning-create-package.md index f543e6d10f..a73b54f4f8 100644 --- a/windows/configure/provisioning-create-package.md +++ b/windows/configure/provisioning-create-package.md @@ -16,30 +16,40 @@ localizationpriority: high - Windows 10 - Windows 10 Mobile -You use Windows Imaging and Configuration Designer (ICD) to create a provisioning package (.ppkg) that contains customization settings. You can apply the provisioning package to a device running Windows 10. +You use Windows Configuration Designer to create a provisioning package (.ppkg) that contains customization settings. You can apply the provisioning package to a device running Windows 10 or Windows 10 Mobile. ->[Learn how to install Windows ICD.](provisioning-install-icd.md) +>[Learn how to install Windows Configuration Designer.](provisioning-install-icd.md) + +>[!TIP] +>We recommend creating a local admin account when developing and testing your provisioning package. We also recommend using a “least privileged” domain user account to join devices to the Active Directory domain. ## Start a new project -1. Open Windows ICD: - - From either the Start screen or Start menu search, type 'Imaging and Configuration Designer' and click on the Windows ICD shortcut, +1. Open Windows Configuration Designer: + - From either the Start screen or Start menu search, type 'Windows Configuration Designer' and click on the Windows Configuration Designer shortcut, or - - Navigate to `C:\Program Files (x86)\Windows Kits\10\Assessment and Deployment Kit\Imaging and Configuration Designer\x86` (on an x64 computer) or `C:\Program Files\Windows Kits\10\Assessment and Deployment Kit\Imaging and Configuration Designer\x86\ICD.exe` (on an x86 computer), and then double-click **ICD.exe**. + - If you installed Windows Configuration Designer from the ADK, navigate to `C:\Program Files (x86)\Windows Kits\10\Assessment and Deployment Kit\Imaging and Configuration Designer\x86` (on an x64 computer) or `C:\Program Files\Windows Kits\10\Assessment and Deployment Kit\Imaging and Configuration Designer\x86\ICD.exe` (on an x86 computer), and then double-click **ICD.exe**. -2. Select your desired option on the **Start** page, which offers three options for creating a provisioning package, as shown in the following image: +2. Select your desired option on the **Start** page, which offers multiple options for creating a provisioning package, as shown in the following image: - ![Simple provisioning or provision school devices or advanced provisioning](images/icd-create-options.png) + ![Configuration Designer wizards](images/icd-create-options-1703.png) - - The **Simple provisioning** and **Provision school devices** options provide wizard-style walkthroughs for creating a provisioning package based on a set of common settings. - - The **Advanced provisioning** option opens a new project with all **Runtime settings** available. + - The wizard options provide a simple interface for configuring common settings for desktop, mobile, and kiosk devices. Wizards are also available for creating provisioning packages for Microsoft Surface Hub and Microsoft HoloLens devices. For a summary of the settings available in the desktop, mobile, and kiosk devices, see [What you can configure using Configuration Designer wizardS](provisioning-packages.md#configuration-designer-wizards). - >[!TIP] - >You can start a project in the simple editor and then switch the project to the advanced editor. - > - >![Switch to advanced editor](images/icd-switch.png) + - [Instructions for the desktop wizard](provision-pcs-for-initial-deployment.md) + - [Instructions for the mobile wizard](provisioning-configure-mobile.md) + - [Instructions for the kiosk wizard](set-up-a-kiosk-for-windows-10-for-desktop-editions.md#wizard) + - [Instructions for HoloLens wizard](https://technet.microsoft.com/itpro/hololens/hololens-provisioning) + - [Instructions for Surface Hub wizard](https://technet.microsoft.com/itpro/surface-hub/provisioning-packages-for-certificates-surface-hub) + + - The **Advanced provisioning** option opens a new project with all **Runtime settings** available. *The rest of this procedure uses advanced provisioning.* + + >[!TIP] + > You can start a project in the simple wizard editor and then switch the project to the advanced editor. + > + > ![Switch to advanced editor](images/icd-switch.png) 3. Enter a name for your project, and then click **Next**. @@ -59,19 +69,18 @@ You use Windows Imaging and Configuration Designer (ICD) to create a provisionin >[!TIP] >**Import a provisioning package** can make it easier to create different provisioning packages that all have certain settings in common. For example, you could create a provisioning package that contains the settings for your organization's network, and then import it into other packages you create so you don't have to reconfigure those common settings repeatedly. -After you click **Finish**, Windows ICD will open the appropriate walkthrough page if you selected **Simple provisioning** or **Provision school devices**, or the **Available customizations** pane if you selected **Advanced provisioning**. The remainder of this topic will explain the **Advanced provisioning scenario**. +After you click **Finish**, Windows Configuration Designer will open the **Available customizations** pane and you can then configure settings for the package. + -- For instructions on **Simple provisioning**, see [Provision PCs with common settings](provision-pcs-for-initial-deployment.md). -- For instructions on **Provision school devices**, see [Set up student PCs to join domain](https://technet.microsoft.com/edu/windows/set-up-students-pcs-to-join-domain). ## Configure settings -For an advanced provisioning project, Windows ICD opens the **Available customizations** pane. The example in the following image is based on **All Windows desktop editions** settings. +For an advanced provisioning project, Windows Configuration Designer opens the **Available customizations** pane. The example in the following image is based on **All Windows desktop editions** settings. ![What the ICD interface looks like](images/icd-runtime.png) -The settings in Windows ICD are based on Windows 10 configuration service providers (CSPs). To learn more about CSPs, see [Introduction to configuration service providers (CSPs) for IT pros](https://technet.microsoft.com/itpro/windows/manage/how-it-pros-can-use-configuration-service-providers). +The settings in Windows Configuration Designer are based on Windows 10 configuration service providers (CSPs). To learn more about CSPs, see [Introduction to configuration service providers (CSPs) for IT pros](https://technet.microsoft.com/itpro/windows/manage/how-it-pros-can-use-configuration-service-providers). The process for configuring settings is similar for all settings. The following table shows an example. @@ -83,9 +92,9 @@ The process for configuring settings is similar for all settings. The following ![step five](images/five.png)
When the setting is configured, it is displayed in the **Selected customizations** pane.![Selected customizations pane](images/icd-step5.png) -For details on each specific setting, see [Windows Provisioning settings reference](https://msdn.microsoft.com/library/windows/hardware/dn965990.aspx). The reference topic for a setting is also displayed in Windows ICD when you select the setting, as shown in the following image. +For details on each specific setting, see [Windows Provisioning settings reference](https://msdn.microsoft.com/library/windows/hardware/dn965990.aspx). The reference topic for a setting is also displayed in Windows Configuration Designer when you select the setting, as shown in the following image. -![Windows ICD opens the reference topic when you select a setting](images/icd-setting-help.png) +![Windows Configuration Designer opens the reference topic when you select a setting](images/icd-setting-help.png) ## Build package @@ -110,7 +119,7 @@ For details on each specific setting, see [Windows Provisioning settings referen > >If a provisioning package is signed by a trusted provisioner, it can be installed on a device without a prompt for user consent. In order to enable trusted provider certificates, you must set the **TrustedProvisioners** setting prior to installing the trusted provisioning package. This is the only way to install a package without user consent. To provide additional security, you can also set **RequireProvisioningPackageSignature**, which prevents users from installing provisioning packages that are not signed by a trusted provisioner. -4. In the **Select where to save the provisioning package** window, specify the output location where you want the provisioning package to go once it's built, and then click **Next**. By default, Windows ICD uses the project folder as the output location. +4. In the **Select where to save the provisioning package** window, specify the output location where you want the provisioning package to go once it's built, and then click **Next**. By default, Windows Configuration Designer uses the project folder as the output location. 5. In the **Build the provisioning package** window, click **Build**. The provisioning package doesn't take long to build. The project information is displayed in the build page and the progress bar indicates the build status. @@ -128,22 +137,21 @@ For details on each specific setting, see [Windows Provisioning settings referen ## Learn more -- Watch the video: [Provisioning Windows 10 Devices with New Tools](https://go.microsoft.com/fwlink/p/?LinkId=615921) - -- Watch the video: [Windows 10 for Mobile Devices: Provisioning Is Not Imaging](https://go.microsoft.com/fwlink/p/?LinkId=615922) +- Watch the video: [Provisioning Windows 10 Devices with New Tools](https://go.microsoft.com/fwlink/p/?LinkId=615921) +- Watch the video: [Windows 10 for Mobile Devices: Provisioning Is Not Imaging](https://go.microsoft.com/fwlink/p/?LinkId=615922) +- [How to bulk-enroll devices with On-premises Mobile Device Management in System Center Configuration Manager](https://docs.microsoft.com/sccm/mdm/deploy-use/bulk-enroll-devices-on-premises-mdm) ## Related topics - [Provisioning packages for Windows 10](provisioning-packages.md) - [How provisioning works in Windows 10](provisioning-how-it-works.md) -- [Install Windows Imaging and Configuration Designer](provisioning-install-icd.md) +- [Install Windows Configuration Designer](provisioning-install-icd.md) - [Apply a provisioning package](provisioning-apply-package.md) - [Settings changed when you uninstall a provisioning package](provisioning-uninstall-package.md) - [Provision PCs with common settings for initial deployment (simple provisioning)](provision-pcs-for-initial-deployment.md) -- [Provision PCs with apps and certificates for initial deployments (advanced provisioning)](provision-pcs-with-apps-and-certificates.md) - [Use a script to install a desktop app in provisioning packages](provisioning-script-to-install-app.md) -- [NFC-based device provisioning](provisioning-nfc.md) -- [Windows ICD command-line interface (reference)](provisioning-command-line.md) +- [PowerShell cmdlets for provisioning Windows 10 (reference)](provisioning-powershell.md) +- [Windows Configuration Designer command-line interface (reference)](provisioning-command-line.md) - [Create a provisioning package with multivariant settings](provisioning-multivariant.md) \ No newline at end of file diff --git a/windows/configure/provisioning-how-it-works.md b/windows/configure/provisioning-how-it-works.md index 1f9b72eb6c..349dfd08c2 100644 --- a/windows/configure/provisioning-how-it-works.md +++ b/windows/configure/provisioning-how-it-works.md @@ -16,7 +16,7 @@ localizationpriority: high - Windows 10 - Windows 10 Mobile -Provisioning packages in Windows 10 provide IT administrators with a simplified way to apply configuration settings to Windows 10 devices. Windows Imaging and Configuration Designer (Windows ICD) is a tool that makes it easy to create a provisioning package. Windows ICD is contained in the [Windows Assessment and Deployment Kit (ADK)](https://developer.microsoft.com/windows/hardware/windows-assessment-deployment-kit). +Provisioning packages in Windows 10 provide IT administrators with a simplified way to apply configuration settings to Windows 10 devices. Windows Configuration Designer is a tool that makes it easy to create a provisioning package. Windows Configuration Designer can be installed from the [Windows Assessment and Deployment Kit (ADK)](https://developer.microsoft.com/windows/hardware/windows-assessment-deployment-kit) or through the Windows Store. ## Provisioning packages @@ -58,9 +58,9 @@ When setting conflicts are encountered, the final values provisioned on the devi Windows provisioning XML is the framework that allows Microsoft and OEM components to declare end-user configurable settings and the on-device infrastructure for applying the settings with minimal work by the component owner. -Settings for each component can be declared within that component's package manifest file. These declarations are turned into settings schema that are used by Windows ICD to expose the potential settings to users to create customizations in the image or in provisioning packages. Windows ICD translates the user configuration, which is declared through Windows provisioning answer file(s), into the on-device provisioning format. +Settings for each component can be declared within that component's package manifest file. These declarations are turned into settings schema that are used by Windows Configuration Designer to expose the potential settings to users to create customizations in the image or in provisioning packages. Windows Configuration Designer translates the user configuration, which is declared through Windows provisioning answer file(s), into the on-device provisioning format. -When the provisioning engine selects a configuration, the Windows provisioning XML is contained within the selected provisioning data and is passed through the configuration manager and then to the Windows provisioning CSP. The Windows provisioning CSP then takes and applies the provisioning to the proper location for the actual component to use. +When the provisioning engine selects a configuration, the Windows provisioning XML is contained within the selected provisioning data and is passed through the configuration manager and then to the [Windows provisioning CSP](https://msdn.microsoft.com/windows/hardware/commercialize/customize/mdm/provisioning-csp). The Windows provisioning CSP then takes and applies the provisioning to the proper location for the actual component to use. ## Provisioning engine @@ -77,7 +77,7 @@ The provisioning engine provides the following functionality: ## Configuration manager -The configuration manager provides the unified way of managing Windows 10 devices. Configuration is mainly done through the Open Mobile Alliance (OMA) Device Management (DM) and Client Provisioning (CP) protocols. The configuration manager handles and parses these protocol requests from different channels and passes them down to Configuration Service Providers (CSPs) to perform the specific management requests and settings. +The configuration manager provides the unified way of managing Windows 10 devices. Configuration is mainly done through the Open Mobile Alliance (OMA) Device Management (DM) and Client Provisioning (CP) protocols. The configuration manager handles and parses these protocol requests from different channels and passes them down to [Configuration Service Providers (CSPs)](https://msdn.microsoft.com/windows/hardware/commercialize/customize/mdm/configuration-service-provider-reference) to perform the specific management requests and settings. The provisioning engine relies on configuration manager for all of the actual processing and application of a chosen configuration. The provisioning engine determines the stage of provisioning and, based on a set of keys, determines the set of configuration to send to the configuration manager. The configuration manager in turn parses and calls into the CSPs for the setting to be applied. @@ -115,9 +115,9 @@ When a trigger occurs, provisioning is initiated for a particular provisioning s ## Device provisioning during OOBE -The provisioning engine always applies provisioning packages persisted in the C:\Recovery\Customizations folder on the OS partition. When the provisioning engine applies provisioning packages in the %ProgramData%\Microsoft\Provisioning folder, certain runtime setting applications, such as the setting to install and configure Windows apps, may be extended past the OOBE pass and continually be processed in the background when the device gets to the desktop. Settings for configuring policies and certain crucial system configurations are always be completed before the first point at which they must take effect. +The provisioning engine always applies provisioning packages persisted in the `C:\Recovery\Customizations` folder on the OS partition. When the provisioning engine applies provisioning packages in the `%ProgramData%\Microsoft\Provisioning` folder, certain runtime setting applications, such as the setting to install and configure Windows apps, may be extended past the OOBE pass and continually be processed in the background when the device gets to the desktop. Settings for configuring policies and certain crucial system configurations are always be completed before the first point at which they must take effect. -Device users can apply a provisioning package from a remote source when the device first boots to OOBE. The device provisioning during OOBE is only triggered after the language, locale, time zone, and other settings on the first OOBE UI page are configured. On all Windows devices, device provisioning during OOBE can be triggered by 5 fast taps on the Windows hardware key. When device provisioning is triggered, the provisioning UI is displayed in the OOBE page. The provisioning UI allows users to select a provisioning package acquired from a remote source, such as through NFC or a removable media. +Device users can apply a provisioning package from a remote source when the device first boots to OOBE. The device provisioning during OOBE is only triggered after the language, locale, time zone, and other settings on the first OOBE UI page are configured. When device provisioning is triggered, the provisioning UI is displayed in the OOBE page. The provisioning UI allows users to select a provisioning package acquired from a remote source, such as through NFC or a removable media. The following table shows how device provisioning can be initiated when a user first boots to OOBE. @@ -125,17 +125,15 @@ The following table shows how device provisioning can be initiated when a user f | Package delivery | Initiation method | Supported device | | --- | --- | --- | | Removable media - USB drive or SD card
(Packages must be placed at media root) | 5 fast taps on the Windows key to launch the provisioning UI |All Windows devices | -| From an administrator device through machine to machine NFC or NFC tag
(The administrator device must run an app that can transfer the package over NFC) | 5 fast taps on the Windows key to launch the provisioning UI | Windows 10 Mobile devices and IoT Core devices | +| From an administrator device through machine-to-machine NFC or NFC tag
(The administrator device must run an app that can transfer the package over NFC) | 5 fast taps on the Windows key to launch the provisioning UI | Windows 10 Mobile devices and IoT Core devices | -The provisioning engine always copies the acquired provisioning packages to the %ProgramData%\Microsoft\Provisioning folder before processing them during OOBE. The provisioning engine always applies provisioning packages embedded in the installed Windows image during Windows Setup OOBE pass regardless of whether the package is signed and trusted. When the provisioning engine applies an encrypted provisioning package on an end-user device during OOBE, users must first provide a valid password to decrypt the package. The provisioning engine also checks whether a provisioning package is signed and trusted; if it's not, the user must provide consent before the package is applied to the device. +The provisioning engine always copies the acquired provisioning packages to the `%ProgramData%\Microsoft\Provisioning` folder before processing them during OOBE. The provisioning engine always applies provisioning packages embedded in the installed Windows image during Windows Setup OOBE pass regardless of whether the package is signed and trusted. When the provisioning engine applies an encrypted provisioning package on an end-user device during OOBE, users must first provide a valid password to decrypt the package. The provisioning engine also checks whether a provisioning package is signed and trusted; if it's not, the user must provide consent before the package is applied to the device. When the provisioning engine applies provisioning packages during OOBE, it applies only the runtime settings from the package to the device. Runtime settings can be system-wide configuration settings, including security policy, Windows app install/uninstall, network configuration, bootstrapping MDM enrollment, provisioning of file assets, account and domain configuration, Windows edition upgrade, and more. The provisioning engine also checks for the configuration settings on the device, such as region/locale or SIM card, and applies the multivariant settings with matching condition(s). ## Device provisioning at runtime -At device runtime, standalone provisioning packages can be applied by user initiation. Only runtime configuration settings including multivariant settings contained in a provisioning package can be applied at device runtime. - -The following table shows when provisioning at device runtime can be initiated. +At device runtime, stand-alone provisioning packages can be applied by user initiation. The following table shows when provisioning at device runtime can be initiated. | Package delivery | Initiation method | Supported device | | --- | --- | --- | @@ -147,7 +145,7 @@ When applying provisioning packages from a removable media attached to the devic When applying multiple provisioning packages to a device, the provisioning engine resolves settings with conflicting configuration values from different packages by evaluating the package ranking using the combination of package owner type and package rank level defined in the package metadata. A configuration setting applied from a provisioning package with the highest package ranking will be the final value applied to the device. -After a standalone provisioning package is applied to the device, the package is persisted in the %ProgramData%\Microsoft\Provisioning folder on the device. Provisioning packages can be removed by an administrator by using the **Add or remove a provisioning package** available under **Settings** > **Accounts** > **Access work or school**. However, Windows 10 doesn't provide an uninstall option to revert runtime settings when removing a provisioning package from the device. +After a stand-alone provisioning package is applied to the device, the package is persisted in the `%ProgramData%\Microsoft\Provisioning` folder on the device. Provisioning packages can be removed by an administrator by using the **Add or remove a provisioning package** available under **Settings** > **Accounts** > **Access work or school**. ## Learn more @@ -160,15 +158,14 @@ After a standalone provisioning package is applied to the device, the package is ## Related topics - [Provisioning packages for Windows 10](provisioning-packages.md) -- [Install Windows Imaging and Configuration Designer](provisioning-install-icd.md) +- [Install Windows Configuration Designer](provisioning-install-icd.md) - [Create a provisioning package](provisioning-create-package.md) - [Apply a provisioning package](provisioning-apply-package.md) - [Settings changed when you uninstall a provisioning package](provisioning-uninstall-package.md) - [Provision PCs with common settings for initial deployment (simple provisioning)](provision-pcs-for-initial-deployment.md) -- [Provision PCs with apps and certificates for initial deployments (advanced provisioning)](provision-pcs-with-apps-and-certificates.md) - [Use a script to install a desktop app in provisioning packages](provisioning-script-to-install-app.md) -- [NFC-based device provisioning](provisioning-nfc.md) -- [Windows ICD command-line interface (reference)](provisioning-command-line.md) +- [PowerShell cmdlets for provisioning Windows 10 (reference)](provisioning-powershell.md) +- [Windows Configuration Designer command-line interface (reference)](provisioning-command-line.md) - [Create a provisioning package with multivariant settings](provisioning-multivariant.md) diff --git a/windows/configure/provisioning-install-icd.md b/windows/configure/provisioning-install-icd.md index 9727bc089d..16ae7f94d5 100644 --- a/windows/configure/provisioning-install-icd.md +++ b/windows/configure/provisioning-install-icd.md @@ -1,6 +1,6 @@ --- -title: Install Windows Imaging and Configuration Designer (Windows 10) -description: Learn how to install and run Windows ICD. +title: Install Windows Configuration Designer (Windows 10) +description: Learn how to install and run Windows Configuration Designer. ms.prod: w10 ms.mktglfcycl: deploy ms.sitesec: library @@ -8,7 +8,7 @@ author: jdeckerMS localizationpriority: high --- -# Install Windows Imaging and Configuration Designer (ICD) +# Install Windows Configuration Designer **Applies to** @@ -16,11 +16,11 @@ localizationpriority: high - Windows 10 - Windows 10 Mobile -Use the Windows Imaging and Configuration Designer (ICD) tool in the Windows Assessment and Deployment Kit (ADK) to create provisioning packages to easily configure devices running Windows 10. Windows ICD is primarily designed for use by IT departments for business and educational institutions who need to provision bring-your-own-device (BYOD) and business-supplied devices. +Use the Windows Configuration Designer tool to create provisioning packages to easily configure devices running Windows 10. Windows Configuration Designer is primarily designed for use by IT departments for business and educational institutions who need to provision bring-your-own-device (BYOD) and business-supplied devices. ## Supported platforms -Windows ICD can create provisioning packages for Windows 10 desktop and mobile editions, including Windows 10 IoT Core. You can run Windows ICD on the following operating systems: +Windows Configuration Designer can create provisioning packages for Windows 10 desktop and mobile editions, including Windows 10 IoT Core, as well as Microsoft Surface Hub and Microsoft HoloLens. You can run Windows Configuration Designer on the following operating systems: - Windows 10 - x86 and amd64 - Windows 8.1 Update - x86 and amd64 @@ -33,18 +33,28 @@ Windows ICD can create provisioning packages for Windows 10 desktop and mobile e - Windows Server 2012 - Windows Server 2008 R2 -## Install Windows ICD +>[!WARNING] +>You must run Windows Configuration Designer on Windows 10 to configure Azure Active Directory enrollment using any of the wizards. -1. Go to [Download the Windows ADK](https://developer.microsoft.com/windows/hardware/windows-assessment-deployment-kit) and select **Get Windows ADK** for the version of Windows 10 that you want to create provisioning packages for (version 1511 or version 1607). +## Install Windows Configuration Designer + +On devices running Windows 10, you can install [the Windows Configuration Designer app from the Windows Store](https://www.microsoft.com/store/apps/9nblggh4tx22). To run Windows Configuration Designer on other operating systems or in languages other than English, install it from the [Windows Assessment and Deployment Kit (ADK) for Windows 10](https://developer.microsoft.com/windows/hardware/windows-assessment-deployment-kit). + +>[!NOTE] +>If you install Windows Configuration Designer from both the ADK and Windows Store, the Store app will not open. +> +>The Windows Configuration Designer App from Windows Store currently supports only English. For a localized version of the Windows Configuration Designer, install it from the Windows ADK. + +1. Go to [Download the Windows ADK](https://developer.microsoft.com/windows/hardware/windows-assessment-deployment-kit) and select **Get Windows ADK** for the version of Windows 10 that you want to create provisioning packages for (version 1511, 1607, or 1703). >[!NOTE] - >The rest of this procedure uses Windows ADK for Windows 10, version 1607 as an example. + >The rest of this procedure uses Windows ADK for Windows 10, version 1703 as an example. 2. Save **adksetup.exe** and then run it. 3. On the **Specify Location** page, select an installation path and then click **Next**. >[!NOTE] - >The estimated disk space listed on this page applies to the full Windows ADK. If you only install Windows ICD, the space requirement is approximately 32 MB. + >The estimated disk space listed on this page applies to the full Windows ADK. If you only install Windows Configuration Designer, the space requirement is approximately 32 MB. 4. Make a selection on the **Windows Kits Privacy** page, and then click **Next**. 5. Accept the **License Agreement**, and then click **Next**. @@ -53,24 +63,24 @@ Windows ICD can create provisioning packages for Windows 10 desktop and mobile e ![Only Configuration Designer selected for installation](images/icd-install.png) -## Current Windows ICD limitations +## Current Windows Configuration Designer limitations -- You can only run one instance of Windows ICD on your computer at a time. +- You can only run one instance of Windows Configuration Designer on your computer at a time. - Be aware that when adding apps and drivers, all files stored in the same folder will be imported and may cause errors during the build process. -- The Windows ICD UI does not support multivariant configurations. Instead, you must use the Windows ICD command-line interface to configure multivariant settings. For more information, see [Create a provisioning package with multivariant settings](provisioning-multivariant.md). +- The Windows Configuration Designer UI does not support multivariant configurations. Instead, you must use the Windows Configuration Designer command-line interface to configure multivariant settings. For more information, see [Create a provisioning package with multivariant settings](provisioning-multivariant.md). -- While you can open multiple projects at the same time within Windows ICD, you can only build one project at a time. +- While you can open multiple projects at the same time within Windows Configuration Designer, you can only build one project at a time. -- In order to enable the simplified authoring jscripts to work on a server SKU running Windows ICD, you need to explicitly enable **Allow websites to prompt for information using scripted windows**. Do this by opening Internet Explorer and then navigating to **Settings** > **Internet Options** > **Security** -> **Custom level** > **Allow websites to prompt for information using scripted windows**, and then choose **Enable**. +- In order to enable the simplified authoring jscripts to work on a server SKU running Windows Configuration Designer, you need to explicitly enable **Allow websites to prompt for information using scripted windows**. Do this by opening Internet Explorer and then navigating to **Settings** > **Internet Options** > **Security** -> **Custom level** > **Allow websites to prompt for information using scripted windows**, and then choose **Enable**. -- If you copy a Windows ICD project from one PC to another PC, make sure that all the associated files for the deployment assets, such as apps and drivers, are copied along with the project to the same path as it was on the original PC. +- If you copy a Windows Configuration Designer project from one PC to another PC, make sure that all the associated files for the deployment assets, such as apps and drivers, are copied along with the project to the same path as it was on the original PC. - For example, when you add a driver to a provisioned package, you must copy the .INF file to a local directory on the PC that is running Windows ICD. If you don't do this, and attempt to use a copied version of this project on a different PC, Windows ICD might attempt to resolve the path to the files that point to the original PC. + For example, when you add a driver to a provisioned package, you must copy the .INF file to a local directory on the PC that is running Windows Configuration Designer. If you don't do this, and attempt to use a copied version of this project on a different PC, Windows Configuration Designer might attempt to resolve the path to the files that point to the original PC. -- **Recommended**: Before starting, copy all source files to the PC running Windows ICD, rather than using external sources like network shares or removable drives. This reduces the risk of interrupting the build process from a temporary network issue or from disconnecting the USB device. +- **Recommended**: Before starting, copy all source files to the PC running Windows Configuration Designer, rather than using external sources like network shares or removable drives. This reduces the risk of interrupting the build process from a temporary network issue or from disconnecting the USB device. **Next step**: [How to create a provisioning package](provisioning-create-package.md) @@ -88,10 +98,9 @@ Windows ICD can create provisioning packages for Windows 10 desktop and mobile e - [Apply a provisioning package](provisioning-apply-package.md) - [Settings changed when you uninstall a provisioning package](provisioning-uninstall-package.md) - [Provision PCs with common settings for initial deployment (simple provisioning)](provision-pcs-for-initial-deployment.md) -- [Provision PCs with apps and certificates for initial deployments (advanced provisioning)](provision-pcs-with-apps-and-certificates.md) - [Use a script to install a desktop app in provisioning packages](provisioning-script-to-install-app.md) -- [NFC-based device provisioning](provisioning-nfc.md) -- [Windows ICD command-line interface (reference)](provisioning-command-line.md) +- [PowerShell cmdlets for provisioning Windows 10 (reference)](provisioning-powershell.md) +- [Windows Configuration Designer command-line interface (reference)](provisioning-command-line.md) - [Create a provisioning package with multivariant settings](provisioning-multivariant.md) diff --git a/windows/configure/provisioning-multivariant.md b/windows/configure/provisioning-multivariant.md index d33f1206b5..d28ac354ee 100644 --- a/windows/configure/provisioning-multivariant.md +++ b/windows/configure/provisioning-multivariant.md @@ -302,15 +302,14 @@ The following events trigger provisioning on Windows 10 devices: - [Provisioning packages for Windows 10](provisioning-packages.md) - [How provisioning works in Windows 10](provisioning-how-it-works.md) -- [Install Windows Imaging and Configuration Designer](provisioning-install-icd.md) +- [Install Windows Configuration Designer](provisioning-install-icd.md) - [Create a provisioning package](provisioning-create-package.md) - [Apply a provisioning package](provisioning-apply-package.md) - [Settings changed when you uninstall a provisioning package](provisioning-uninstall-package.md) - [Provision PCs with common settings for initial deployment (simple provisioning)](provision-pcs-for-initial-deployment.md) -- [Provision PCs with apps and certificates for initial deployments (advanced provisioning)](provision-pcs-with-apps-and-certificates.md) - [Use a script to install a desktop app in provisioning packages](provisioning-script-to-install-app.md) -- [NFC-based device provisioning](provisioning-nfc.md) -- [Windows ICD command-line interface (reference)](provisioning-command-line.md) +- [PowerShell cmdlets for provisioning Windows 10 (reference)](provisioning-powershell.md) +- [Windows Configuration Designer command-line interface (reference)](provisioning-command-line.md)   diff --git a/windows/configure/provisioning-nfc.md b/windows/configure/provisioning-nfc.md index 114e6d5545..fad3428d0c 100644 --- a/windows/configure/provisioning-nfc.md +++ b/windows/configure/provisioning-nfc.md @@ -17,7 +17,7 @@ localizationpriority: high Near field communication (NFC) enables Windows 10 Mobile Enterprise and Windows 10 Mobile devices to communicate with an NFC tag or another NFC-enabled transmitting device. Enterprises that do bulk provisioning can use NFC-based device provisioning to provide a provisioning package to the device that's being provisioned. NFC provisioning is simple and convenient and it can easily store an entire provisioning package. -The NFC provisioning option enables the administrator to provide a provisioning package during initial device setup or the out-of-box experience (OOBE) phase. Administrators can use the NFC provisioning option to transfer provisioning information to persistent storage by tapping an unprovisioned mobile device to an NFC tag or NFC-enabled device. To use NFC for pre-provisioning a device, you must either prepare your own NFC tags by storing your provisioning package to a tag as described in this section, or build the infrastructure needed to transmit a provisioning package between an NFC-enabled device and a mobile device during OOBE. +The NFC provisioning option enables the administrator to provide a provisioning package during initial device setup (the out-of-box experience or OOBE phase). Administrators can use the NFC provisioning option to transfer provisioning information to persistent storage by tapping an unprovisioned mobile device to an NFC tag or NFC-enabled device. To use NFC for pre-provisioning a device, you must either prepare your own NFC tags by storing your provisioning package to a tag as described in this section, or build the infrastructure needed to transmit a provisioning package between an NFC-enabled device and a mobile device during OOBE. ## Provisioning OOBE UI @@ -131,18 +131,9 @@ For detailed information and code samples on how to implement an NFC-enabled dev ## Related topics -- [Provisioning packages for Windows 10](provisioning-packages.md) -- [How provisioning works in Windows 10](provisioning-how-it-works.md) -- [Install Windows Imaging and Configuration Designer](provisioning-install-icd.md) -- [Create a provisioning package](provisioning-create-package.md) -- [Apply a provisioning package](provisioning-apply-package.md) -- [Settings changed when you uninstall a provisioning package](provisioning-uninstall-package.md) -- [Provision PCs with common settings for initial deployment (simple provisioning)](provision-pcs-for-initial-deployment.md) -- [Provision PCs with apps and certificates for initial deployments (advanced provisioning)](provision-pcs-with-apps-and-certificates.md) -- [Use a script to install a desktop app in provisioning packages](provisioning-script-to-install-app.md) -- [Windows ICD command-line interface (reference)](provisioning-command-line.md) -- [Create a provisioning package with multivariant settings](provisioning-multivariant.md) +- [Use Windows Configuration Designer to configure Windows 10 Mobile devices](provisioning-configure-mobile.md) +- [Barcode provisioning and the package splitter tool](provisioning-package-splitter.md)     diff --git a/windows/configure/provisioning-package-splitter.md b/windows/configure/provisioning-package-splitter.md new file mode 100644 index 0000000000..00a62a1ae4 --- /dev/null +++ b/windows/configure/provisioning-package-splitter.md @@ -0,0 +1,88 @@ +--- +title: Barcode provisioning and the package splitter tool (Windows 10) +description: +ms.prod: w10 +ms.mktglfcycl: deploy +ms.sitesec: library +author: jdeckerMS +localizationpriority: high +--- + +# Barcode provisioning and the package splitter tool + + +**Applies to** + +- Windows 10 Mobile + +Enterprises that do bulk provisioning can use barcode-based device provisioning to provide a provisioning package to the device that's being provisioned. + +The barcode provisioning option enables the administrator to provide a provisioning package during initial device setup (the out-of-box experience or OOBE phase). To use barcodes to provision a device, your devices must have an integrated barcode scanner. You can get the barcode format that the scanner supports from your OEM or device provider, and use your existing tools and processes to convert a provisioning package into barcodes. + +Enterprise IT professionals who want to use a barcode to provision mobile devices during OOBE can use the package splitter tool, **ppkgtobase64.exe**, which is a command-line tool to split the provisioning package into smaller files. + +The smallest provisioning package is typically 5-6 KB, which cannot fit into one single barcode. The package splitter tool allows partners to split the original provisioning package into multiple smaller sized chunks that are encoded with Base64 so that enterprises can leverage their existing tools to convert these files into barcodes. + +When you [install Windows Configuration Designer](provisioning-install-icd.md) from the Windows Assessment and Deployment Kit (ADK), **ppkgtobase64.exe** is installed to the same folder. + +## Prerequisites + +Before you can use the tool, you must have a built provisioning package. The package file is the input to the package splitter tool. + +- To build a provisioning package using the Windows Configuration Designer UI, see [Use Windows Configuration Designer to configure Windows 10 Mobile devices](provisioning-configure-mobile.md). +- To build a provisioning package using the Windows Configuration Designer CLI, see [Windows Configuration Designer command-line interface](provisioning-command-line.md). + +## To use the package splitter tool (ppkgtobase64.exe) + +1. Open a command-line window with administrator privileges. + + +2. From the command-line, navigate to the Windows Configuration Designer install directory. + + On an x64 computer, type: + ``` + cd C:\Program Files (x86)\Windows Kits\10\Assessment and Deployment Kit\Imaging and Configuration Designer\x86 + ``` + + - or - + + On an x86 computer, type: + + ``` + cd C:\Program Files\Windows Kits\10\Assessment and Deployment Kit\Imaging and Configuration Designer\x86 + ``` + +3. Run `ppkgtobase64.exe`. The [syntax](#syntax) and [switches and arguments](#switches-and-arguments) sections provide details for the command. + + +### Syntax + +``` +ppkgtobase64.exe -i -o -s [-c] [/?] +``` + +### Switches and arguments + +| Switch | Required? | Arguments | +| --- | --- | --- | +| -i | Yes | Use to specify the path and file name of the provisioning package that you want to divide into smaller files.

The tool allows you to specify the absolute path of the provisioning package file. However, if you don't specify the path, the tool will search the current folder for a package that matches the file name you specified. | +| -o | Yes | Use to specify the directory where the output files will be saved. | +| -s | Yes | Use to specify the size of the block that will be encoded in Base64. | +| -c | No | Use to delete any files in the output directory if the directory already exists. This parameter is optional. | +| /? | No | Lists the switches and their descriptions for the command-line tool or for certain commands. | + + + + + +## Related topics + + +  + +  + + + + + diff --git a/windows/configure/provisioning-packages.md b/windows/configure/provisioning-packages.md index 557bf3e595..8732d8c5a3 100644 --- a/windows/configure/provisioning-packages.md +++ b/windows/configure/provisioning-packages.md @@ -14,8 +14,8 @@ localizationpriority: high **Applies to** -- Windows 10 -- Windows 10 Mobile +- Windows 10 +- Windows 10 Mobile Windows provisioning makes it easy for IT administrators to configure end-user devices without imaging. Using Windows provisioning, an IT administrator can easily specify desired configuration and settings required to enroll the devices into management and then apply that configuration to target devices in a matter of minutes. It is best suited for small- to medium-sized businesses with deployments that range from tens to a few hundred computers. @@ -23,59 +23,74 @@ A provisioning package (.ppkg) is a container for a collection of configuration Provisioning packages are simple enough that with a short set of written instructions, a student or non-technical employee can use them to configure their device. This can result in a significant reduction in the time required to configure multiple devices in your organization. -The [Windows Assessment and Deployment Kit (ADK) for Windows 10](https://developer.microsoft.com/windows/hardware/windows-assessment-deployment-kit) includes the Imaging and Configuration Designer (ICD), a tool for configuring provisioning packages. +The [Windows Assessment and Deployment Kit (ADK) for Windows 10](https://developer.microsoft.com/windows/hardware/windows-assessment-deployment-kit) includes the Windows Configuration Designer, a tool for configuring provisioning packages. Windows Configuration Designer is also available as an [app in the Windows Store](https://www.microsoft.com/store/apps/9nblggh4tx22). -## New in Windows 10, version 1607 -Windows ICD for Windows 10, version 1607, simplifies common provisioning scenarios. -![Configuration Designer options](images/icd.png) -Windows ICD in Windows 10, version 1607, supports the following scenarios for IT administrators: +## New in Windows 10, version 1703 -* **Simple provisioning** – Enables IT administrators to define a desired configuration in Windows ICD and then apply that configuration on target devices. The simple provisioning wizard makes the entire process quick and easy by guiding an IT administrator through common configuration settings in a step-by-step manner. +- The tool for creating provisioning packages is renamed Windows Configuration Designer, replacing the Windows Imaging and Configuration Designer (ICD) tool. The components for creating images have been removed from Windows Configuration Designer, which now provides access to runtime settings only. +- Windows Configuration Designer can still be installed from the Windows ADK. You can also install it from the Windows Store. +- Windows Configuration Designer adds more wizards to make it easier to create provisioning packages for specific scenarios. See [What you can configure](#configuration-designer-wizards) for wizard descriptions. +- The wizard **Provision desktop devices** (previously called **Simple provisioning**) now enables joining Azure Active Directory (Azure AD) domains and also allows you to remove non-Microsoft software from Windows desktop devices during provisioning. +- When provisioning packages are applied to a device, a status screen indicates successful or failed provisioning. +- Windows 10 includes PowerShell cmdlets that simplify scripted provisioning. Using these cmdlets, you can add provisioning packages, remove provisioning packages and generate log files to investigate provisioning errors. +- The **Provision school devices** wizard is removed from Windows Configuration Designer. Instead, use the [Setup School PCs app](https://www.microsoft.com/store/p/set-up-school-pcs/9nblggh4ls40) from the Windows Store. + - > [Learn how to use simple provisioning to configure Windows 10 computers.](provision-pcs-for-initial-deployment.md) - -* **Advanced provisioning (deployment of classic (Win32) and Universal Windows Platform (UWP) apps, and certificates)** – Allows an IT administrator to use Windows ICD to open provisioning packages in the advanced settings editor and include apps for deployment on end-user devices. - - > [Learn how to use advanced provisioning to configure Windows 10 computers with apps and certificates.](provision-pcs-with-apps-and-certificates.md) - -* **Mobile device enrollment into management** - Enables IT administrators to purchase off-the-shelf retail Windows 10 Mobile devices and enroll them into mobile device management (MDM) before handing them to end-users in the organization. IT administrators can use Windows ICD to specify the management end-point and apply the configuration on target devices by connecting them to a Windows PC (tethered deployment) or through an SD card. Supported management end-points include: - - * System Center Configuration Manager and Microsoft Intune hybrid (certificate-based enrollment) - * AirWatch (password-string based enrollment) - * Mobile Iron (password-string based enrollment) - * Other MDMs (cert-based enrollment) - -> [!NOTE] -> Windows ICD in Windows 10, version 1607, also provides a wizard to create provisioning packages for school PCs. To learn more, see [Set up students' PCs to join domain](https://technet.microsoft.com/edu/windows/index). ## Benefits of provisioning packages Provisioning packages let you: -- Quickly configure a new device without going through the process of installing a new image. +- Quickly configure a new device without going through the process of installing a new image. -- Save time by configuring multiple devices using one provisioning package. +- Save time by configuring multiple devices using one provisioning package. -- Quickly configure employee-owned devices in an organization without a mobile device management (MDM) infrastructure. +- Quickly configure employee-owned devices in an organization without a mobile device management (MDM) infrastructure. -- Set up a device without the device having network connectivity. +- Set up a device without the device having network connectivity. Provisioning packages can be: -- Installed using removable media such as an SD card or USB flash drive. +- Installed using removable media such as an SD card or USB flash drive. -- Attached to an email. +- Attached to an email. -- Downloaded from a network share. +- Downloaded from a network share. + +- Deployed in NFC tags or barcodes. ## What you can configure +### Configuration Designer wizards -The following table provides some examples of what you can configure using provisioning packages. +The following table describes settings that you can configure using the wizards in Windows Configuration Designer to create provisioning packages. + + + + + + + + + +
**Step****Description****Desktop
wizard**		**Mobile
wizard**		**Kiosk
wizard**
Set up deviceAssign device name,
enter product key to upgrade Windows,
configure shared used,
remove pre-installed software		![yes](images/checkmark.png)![yes](images/checkmark.png)
(Only device name and upgrade key)		![yes](images/checkmark.png)
Set up networkConnect to a Wi-Fit network![yes](images/checkmark.png)![yes](images/checkmark.png)![yes](images/checkmark.png)
Account managementEnroll device in Active Directory,
enroll device in Azure Active Directory,
or create a local administrator account		![yes](images/checkmark.png)![no](images/crossmark.png)![yes](images/checkmark.png)
Bulk Enrollment in Azure ADEnroll device in Azure Active Directory

Before you use a Windows Configuration Designer wizard to configure bulk Azure AD enrollment, [set up Azure AD join in your organization](https://docs.microsoft.com/azure/active-directory/active-directory-azureadjoin-setup).		![no](images/crossmark.png)![yes](images/checkmark.png)![no](images/crossmark.png)
Add applicationsInstall applications using the provisioning package.![yes](images/checkmark.png)![no](images/crossmark.png)![yes](images/checkmark.png)
Add certificatesInclude a certificate file in the provisioning package.![yes](images/checkmark.png)![no](images/crossmark.png)![yes](images/checkmark.png)
Configure kiosk account and appCreate local account to run the kiosk mode app,
specify the app to run in kiosk mode		![no](images/crossmark.png)![no](images/crossmark.png)![yes](images/checkmark.png)
Configure kiosk common settingsSet tablet mode,
configure welcome and shutdown screens,
turn off timeout settings		![no](images/crossmark.png)![no](images/crossmark.png)![yes](images/checkmark.png)
+ +- [Instructions for the desktop wizard](provision-pcs-for-initial-deployment.md) +- [Instructions for the mobile wizard](provisioning-configure-mobile.md) +- [Instructions for the kiosk wizard](set-up-a-kiosk-for-windows-10-for-desktop-editions.md#wizard) + + + +>[!NOTE] +>After you start a project using a Windows Configuration Designer wizard, you can switch to the advanced editor to configure additional settings in the provisioning package. + +### Configuration Designer advanced editor + +The following table provides some examples of settings that you can configure using the Windows Configuration Designer advanced editor to create provisioning packages. | Customization options | Examples | |--------------------------|-----------------------------------------------------------------------------------------------| @@ -93,25 +108,52 @@ The following table provides some examples of what you can configure using provi For details about the settings you can customize in provisioning packages, see [Windows Provisioning settings reference]( https://go.microsoft.com/fwlink/p/?LinkId=619012). +## Changes to provisioning in Windows 10, version 1607 + +>[!NOTE] +>This section is retained for customers using Windows 10, version 1607, on the Current Branch for Business. Some of this information is not applicable in Windows 10, version 1703. + +Windows ICD for Windows 10, version 1607, simplified common provisioning scenarios. + +![Configuration Designer options](images/icd.png) + +Windows ICD in Windows 10, version 1607, supported the following scenarios for IT administrators: + +* **Simple provisioning** – Enables IT administrators to define a desired configuration in Windows ICD and then apply that configuration on target devices. The simple provisioning wizard makes the entire process quick and easy by guiding an IT administrator through common configuration settings in a step-by-step manner. + + > [Learn how to use simple provisioning to configure Windows 10 computers.](provision-pcs-for-initial-deployment.md) + +* **Advanced provisioning (deployment of classic (Win32) and Universal Windows Platform (UWP) apps, and certificates)** – Allows an IT administrator to use Windows ICD to open provisioning packages in the advanced settings editor and include apps for deployment on end-user devices. + +* **Mobile device enrollment into management** - Enables IT administrators to purchase off-the-shelf retail Windows 10 Mobile devices and enroll them into mobile device management (MDM) before handing them to end-users in the organization. IT administrators can use Windows ICD to specify the management end-point and apply the configuration on target devices by connecting them to a Windows PC (tethered deployment) or through an SD card. Supported management end-points include: + + * System Center Configuration Manager and Microsoft Intune hybrid (certificate-based enrollment) + * AirWatch (password-string based enrollment) + * Mobile Iron (password-string based enrollment) + * Other MDMs (cert-based enrollment) + +> [!NOTE] +> Windows ICD in Windows 10, version 1607, also provided a wizard to create provisioning packages for school PCs. To learn more, see [Set up students' PCs to join domain](https://technet.microsoft.com/edu/windows/index). + ## Learn more -- Watch the video: [Provisioning Windows 10 Devices with New Tools](https://go.microsoft.com/fwlink/p/?LinkId=615921) +- Watch the video: [Provisioning Windows 10 Devices with New Tools](https://go.microsoft.com/fwlink/p/?LinkId=615921) -- Watch the video: [Windows 10 for Mobile Devices: Provisioning Is Not Imaging](https://go.microsoft.com/fwlink/p/?LinkId=615922) +- Watch the video: [Windows 10 for Mobile Devices: Provisioning Is Not Imaging](https://go.microsoft.com/fwlink/p/?LinkId=615922) ## Related topics - [How provisioning works in Windows 10](provisioning-how-it-works.md) -- [Install Windows Imaging and Configuration Designer](provisioning-install-icd.md) +- [Install Windows Configuration Designer](provisioning-install-icd.md) - [Create a provisioning package](provisioning-create-package.md) - [Apply a provisioning package](provisioning-apply-package.md) - [Settings changed when you uninstall a provisioning package](provisioning-uninstall-package.md) - [Provision PCs with common settings for initial deployment (simple provisioning)](provision-pcs-for-initial-deployment.md) -- [Provision PCs with apps and certificates for initial deployments (advanced provisioning)](provision-pcs-with-apps-and-certificates.md) - [Use a script to install a desktop app in provisioning packages](provisioning-script-to-install-app.md) -- [NFC-based device provisioning](provisioning-nfc.md) -- [Windows ICD command-line interface (reference)](provisioning-command-line.md) +- [PowerShell cmdlets for provisioning Windows 10 (reference)](provisioning-powershell.md) +- [Windows Configuration Designer command-line interface (reference)](provisioning-command-line.md) - [Create a provisioning package with multivariant settings](provisioning-multivariant.md) +- [Use Windows Configuration Designer to configure Windows 10 Mobile devices](provisioning-configure-mobile.md) diff --git a/windows/configure/provisioning-powershell.md b/windows/configure/provisioning-powershell.md new file mode 100644 index 0000000000..508bada17f --- /dev/null +++ b/windows/configure/provisioning-powershell.md @@ -0,0 +1,72 @@ +--- +title: PowerShell cmdlets for provisioning Windows 10 (Windows 10) +description: +ms.prod: w10 +ms.mktglfcycl: deploy +ms.sitesec: library +author: jdeckerMS +localizationpriority: high +--- + +# PowerShell cmdlets for provisioning Windows 10 (reference) + + +**Applies to** + +- Windows 10 +- Windows 10 Mobile + +Windows 10, version 1703, ships with Windows Provisioning PowerShell cmdlets. These cmdlets make it easy to script the following functions. + + + + + + + + + + + +
CmdletUse this cmdlet toSyntax
Add-ProvisioningPackage Apply a provisioning package```Add-ProvisioningPackage [-Path] [-ForceInstall] [-LogsFolder ] [-WprpFile ] []```
Remove-ProvisioningPackageRemove a provisioning package ```Remove-ProvisioningPackage -PackageId [-LogsFolder ] [-WprpFile ] []```
```Remove-ProvisioningPackage -Path [-LogsFolder ] [-WprpFile ] []```
```Remove-ProvisioningPackage -AllInstalledPackages [-LogsFolder ] [-WprpFile ] []```
Get-ProvisioningPackage Get information about an installed provisioning package ```Get-ProvisioningPackage -PackageId [-LogsFolder ] [-WprpFile ] []```
```Get-ProvisioningPackage -Path [-LogsFolder ] [-WprpFile ] []```
```Get-ProvisioningPackage -AllInstalledPackages [-LogsFolder ] [-WprpFile ] []```
Export-ProvisioningPackage Extract the contents of a provisioning package ```Export-ProvisioningPackage -PackageId -OutputFolder [-Overwrite] [-AnswerFileOnly] [-LogsFolder ] [-WprpFile ] []```
```Export-ProvisioningPackage -Path -OutputFolder [-Overwrite] [-AnswerFileOnly] [-LogsFolder ] [-WprpFile ] []```
Install-TrustedProvisioningCertificate Adds a certificate to the Trusted Certificate store ```Install-TrustedProvisioningCertificate ```
Get-TrustedProvisioningCertificate List all installed trusted provisioning certificates; use this cmdlet to get the certificate thumbprint to use with the **Uninstall-TrustedProvisioningCertificate** cmdlet```Get-TrustedProvisioningCertificate```
Uninstall-TrustedProvisioningCertificate Remove a previously installed provisioning certificate```Uninstall-TrustedProvisioningCertificate ```
+ +>[!NOTE] +> You can use Get-Help to get usage help on any command. For example: `Get-Help Add-ProvisioningPackage` + +Trace logs are captured when using cmdlets. The following logs are available in the logs folder after the cmdlet completes: + +- ProvTrace.<timestamp>.ETL - ETL trace file, unfiltered +- ProvTrace.<timestamp>.XML - ETL trace file converted into raw trace events, unfiltered +- ProvTrace.<timestamp>.TXT - TEXT file containing trace output formatted for easy reading, filtered to only show events logged by providers in the WPRP file +- ProvLogReport.<timestamp>.XLS - Excel file containing trace output, filtered to only show events logged by providers in WPRP file + + + +>[!NOTE] +>When applying provisioning packages using Powershell cmdlets, the default behavior is to suppress the prompt that appears when applying an unsigned provisioning package. This is by design so that provisioning packages can be applied as part of existing scripts. + + +## Related topics + +- [How provisioning works in Windows 10](provisioning-how-it-works.md) +- [Install Windows Configuration Designer](provisioning-install-icd.md) +- [Create a provisioning package](provisioning-create-package.md) +- [Apply a provisioning package](provisioning-apply-package.md) +- [Settings changed when you uninstall a provisioning package](provisioning-uninstall-package.md) +- [Provision PCs with common settings for initial deployment (simple provisioning)](provision-pcs-for-initial-deployment.md) +- [Use a script to install a desktop app in provisioning packages](provisioning-script-to-install-app.md) +- [Windows Configuration Designer command-line interface (reference)](provisioning-command-line.md) +- [Create a provisioning package with multivariant settings](provisioning-multivariant.md) + + + + + +  + +  + + + + + diff --git a/windows/configure/provisioning-script-to-install-app.md b/windows/configure/provisioning-script-to-install-app.md index 8754c66299..20ada61de8 100644 --- a/windows/configure/provisioning-script-to-install-app.md +++ b/windows/configure/provisioning-script-to-install-app.md @@ -168,21 +168,21 @@ Here’s a table describing this relationship, using the PowerShell example from ### Add script to provisioning package -When you have the batch file written and the referenced assets ready to include, you can add them to a provisioning package in the Window Imaging and Configuration Designer (Windows ICD). +When you have the batch file written and the referenced assets ready to include, you can add them to a provisioning package in the Window Configuration Designer. -Using ICD, specify the full details of how the script should be run in the CommandLine setting in the provisioning package. This includes flags or any other parameters that you would normally type on the command line. So for example if the package contained an app installer called install.exe and a script used to automate the install called InstallMyApp.bat, the `ProvisioningCommands/DeviceContext/CommandLine` setting should be configured to: +Using Windows Configuration Designer, specify the full details of how the script should be run in the CommandLine setting in the provisioning package. This includes flags or any other parameters that you would normally type on the command line. So for example if the package contained an app installer called install.exe and a script used to automate the install called InstallMyApp.bat, the `ProvisioningCommands/DeviceContext/CommandLine` setting should be configured to: ``` cmd /c InstallMyApp.bat ``` -In ICD, this looks like: +In Windows Configuration Designer, this looks like: ![Command line in Selected customizations](images/icd-script1.png) You also need to add the relevant assets for that command line including the orchestrator script and any other assets it references such as installers or .cab files. -In ICD, that is done by adding files under the `ProvisioningCommands/DeviceContext/CommandFiles` setting. +In Windows Configuration Designer, that is done by adding files under the `ProvisioningCommands/DeviceContext/CommandFiles` setting. ![Command files in Selected customizations](images/icd-script2.png) @@ -211,12 +211,11 @@ When you are done, [build the package](provisioning-create-package.md#build-pack - [Provisioning packages for Windows 10](provisioning-packages.md) - [How provisioning works in Windows 10](provisioning-how-it-works.md) -- [Install Windows Imaging and Configuration Designer](provisioning-install-icd.md) +- [Install Windows Configuration Designer](provisioning-install-icd.md) - [Create a provisioning package](provisioning-create-package.md) - [Apply a provisioning package](provisioning-apply-package.md) - [Settings changed when you uninstall a provisioning package](provisioning-uninstall-package.md) - [Provision PCs with common settings for initial deployment (simple provisioning)](provision-pcs-for-initial-deployment.md) -- [Provision PCs with apps and certificates for initial deployments (advanced provisioning)](provision-pcs-with-apps-and-certificates.md) -- [NFC-based device provisioning](provisioning-nfc.md) -- [Windows ICD command-line interface (reference)](provisioning-command-line.md) +- [Windows Configuration Designer command-line interface (reference)](provisioning-command-line.md) +- [PowerShell cmdlets for provisioning Windows 10 (reference)](provisioning-powershell.md) - [Create a provisioning package with multivariant settings](provisioning-multivariant.md) \ No newline at end of file diff --git a/windows/configure/provisioning-uninstall-package.md b/windows/configure/provisioning-uninstall-package.md index b3836ede88..e4ee9c442e 100644 --- a/windows/configure/provisioning-uninstall-package.md +++ b/windows/configure/provisioning-uninstall-package.md @@ -27,7 +27,7 @@ Only settings in the following lists are revertible. ## Registry-based settings -The registry-based settings that are revertible when a provisioning package is uninstalled all fall under these categories, which you can find in the Graphical User Interface of the Windows Imaging and Configuration Designer (Windows ICD). +The registry-based settings that are revertible when a provisioning package is uninstalled all fall under these categories, which you can find in the Windows Configuration Designer. - [Wi-Fi Sense](https://msdn.microsoft.com/library/windows/hardware/mt219706.aspx) @@ -78,14 +78,13 @@ Here is the list of revertible settings based on configuration service providers - [Provisioning packages for Windows 10](provisioning-packages.md) - [How provisioning works in Windows 10](provisioning-how-it-works.md) -- [Install Windows Imaging and Configuration Designer](provisioning-install-icd.md) +- [Install Windows Configuration Designer](provisioning-install-icd.md) - [Create a provisioning package](provisioning-create-package.md) - [Apply a provisioning package](provisioning-apply-package.md) - [Provision PCs with common settings for initial deployment (simple provisioning)](provision-pcs-for-initial-deployment.md) -- [Provision PCs with apps and certificates for initial deployments (advanced provisioning)](provision-pcs-with-apps-and-certificates.md) - [Use a script to install a desktop app in provisioning packages](provisioning-script-to-install-app.md) -- [NFC-based device provisioning](provisioning-nfc.md) -- [Windows ICD command-line interface (reference)](provisioning-command-line.md) +- [PowerShell cmdlets for provisioning Windows 10 (reference)](provisioning-powershell.md) +- [Windows Configuration Designer command-line interface (reference)](provisioning-command-line.md) - [Create a provisioning package with multivariant settings](provisioning-multivariant.md)   diff --git a/windows/configure/set-up-a-device-for-anyone-to-use.md b/windows/configure/set-up-a-device-for-anyone-to-use.md index f274498ed1..7a58deaa8f 100644 --- a/windows/configure/set-up-a-device-for-anyone-to-use.md +++ b/windows/configure/set-up-a-device-for-anyone-to-use.md @@ -1,5 +1,5 @@ --- -title: Set up a device for anyone to use (kiosk mode) (Windows 10) +title: Set up a device for anyone to use in kiosk mode (Windows 10) description: You can configure Windows 10 as a kiosk device, so that users can only interact with a single app. ms.assetid: F1F4FF19-188C-4CDC-AABA-977639C53CA8 keywords: ["kiosk", "lockdown", "assigned access"] @@ -8,6 +8,7 @@ ms.mktglfcycl: manage ms.sitesec: library author: jdeckerMS localizationpriority: high +redirect_url: https://technet.microsoft.com/itpro/windows/configure/kiosk-shared-pc --- # Set up a device for anyone to use (kiosk mode) diff --git a/windows/configure/set-up-a-kiosk-for-windows-10-for-desktop-editions.md b/windows/configure/set-up-a-kiosk-for-windows-10-for-desktop-editions.md index 211f47f9c2..e9f19dfa8f 100644 --- a/windows/configure/set-up-a-kiosk-for-windows-10-for-desktop-editions.md +++ b/windows/configure/set-up-a-kiosk-for-windows-10-for-desktop-editions.md @@ -19,52 +19,65 @@ localizationpriority: high > **Looking for Windows Embedded 8.1 Industry information?** See [Assigned Access]( https://go.microsoft.com/fwlink/p/?LinkId=613653) -A single-use or *kiosk* device is easy to set up in Windows 10 for desktop editions (Pro, Enterprise, and Education). For a kiosk device to run a Universal Windows app, use the **assigned access** feature. For a kiosk device (Windows 10 Enterprise or Education) to run a Classic Windows application, use **Shell Launcher** to set a custom user interface as the shell. To return the device to the regular shell, see [Sign out of assigned access](#sign-out-of-assigned-access). +A single-use or *kiosk* device is easy to set up in Windows 10 for desktop editions. -**Note**   -A Universal Windows app is built on the Universal Windows Platform (UWP), which was first introduced in Windows 8 as the Windows Runtime. A Classic Windows application uses the Classic Windows Platform (CWP) (e.g., COM, Win32, WPF, WinForms, etc.) and is typically launched using an .EXE or .DLL file. +- Use the [Provision kiosk devices wizard](#wizard) in Windows Configuration Designer to create a provisioning package that configures a kiosk device running either a Universal Windows app or a Classic Windows application (Windows 10 Enterprise or Education only). + + or + +- For a kiosk device to run a Universal Windows app, use the [assigned access](#assigned-access) feature (Windows 10 Pro, Enterprise, or Education). + + or + +- For a kiosk device to run a Classic Windows application, use [Shell Launcher](#shell-launcher) to set a custom user interface as the shell (Windows 10 Enterprise or Education only). + +To return the device to the regular shell, see [Sign out of assigned access](#sign-out-of-assigned-access). + +>[!NOTE] +>A Universal Windows app is built on the Universal Windows Platform (UWP), which was first introduced in Windows 8 as the Windows Runtime. A Classic Windows application uses the Classic Windows Platform (CWP) (e.g., COM, Win32, WPF, WinForms, etc.) and is typically launched using an .EXE or .DLL file.   -## Other settings to lock down -For a more secure kiosk experience, we recommend that you make the following configuration changes to the device: + +## Set up a kiosk using Windows Configuration Designer -- Put device in **Tablet mode**. +When you use the **Provision kiosk devices** wizard in Windows Configuration Designer, you can configure the kiosk to run either a Universal Windows app or a Classic Windows application. - If you want users to be able to use the touch (on screen) keyboard, go to **Settings** > **System** > **Tablet mode** and choose **On.** +>[!IMPORTANT] +>When you build a provisioning package, you may include sensitive information in the project files and in the provisioning package (.ppkg) file. Although you have the option to encrypt the .ppkg file, project files are not encrypted. You should store the project files in a secure location and delete the project files when they are no longer needed. -- Hide **Ease of access** feature on the logon screen. - Go to **Control Panel** > **Ease of Access** > **Ease of Access Center**, and turn off all accessibility tools. +[Install Windows Configuration Designer](provisioning-install-icd.md), then open Windows Configuration Designer and select **Provision kiosk devices**. After you name your project, and click **Next**, configure the settings as shown in the following table. -- Disable the hardware power button. - Go to **Power Options** > **Choose what the power button does**, change the setting to **Do nothing**, and then **Save changes**. -- Remove the power button from the sign-in screen. + + + + + + + + + +
![step one](images/one.png)![set up device](images/set-up-device.png)

Enable device setup if you want to configure settings on this page.

**If enabled:**

Enter a name for the device.

(Optional) Select a license file to upgrade Windows 10 to a different edition. [See the permitted upgrades.](https://technet.microsoft.com/itpro/windows/deploy/windows-10-edition-upgrades)

Toggle **Configure devices for shared use** off. This setting optimizes Windows 10 for shared use scenarios and isn't necessary for a kiosk scenario.

You can also select to remove pre-installed software from the device. 		![device name, upgrade to enterprise, shared use, remove pre-installed software](images/set-up-device-details.png)
![step two](images/two.png) ![set up network](images/set-up-network.png)

Enable network setup if you want to configure settings on this page.

**If enabled:**

Toggle **On** or **Off** for wireless network connectivity. If you select **On**, enter the SSID, the network type (**Open** or **WPA2-Personal**), and (if **WPA2-Personal**) the password for the wireless network.		![Enter network SSID and type](images/set-up-network-details.png)
![step three](images/three.png) ![account management](images/account-management.png)

Enable account management if you want to configure settings on this page.

**If enabled:**

You can enroll the device in Active Directory, enroll in Azure Active Directory, or create a local administrator account on the device

To enroll the device in Active Directory, enter the credentials for a least-privileged user account to join the device to the domain.

Before you use a Windows Configuration Designer wizard to configure bulk Azure AD enrollment, [set up Azure AD join in your organization](https://docs.microsoft.com/azure/active-directory/active-directory-azureadjoin-setup). The **maximum number of devices per user** setting in your Azure AD tenant determines how many times the bulk token that you get in the wizard can be used. To enroll the device in Azure AD, select that option and enter a friendly name for the bulk token you will get using the wizard. Set an expiration date for the token (maximum is 30 days from the date you get the token). Click **Get bulk token**. In the **Let's get you signed in** window, enter an account that has permissions to join a device to Azure AD, and then the password. Click **Accept** to give Windows Configuration Designer the necessary permissions.

**Warning:** You must run Windows Configuration Designer on Windows 10 to configure Azure Active Directory enrollment using any of the wizards.

To create a local administrator account, select that option and enter a user name and password.

**Important:** If you create a local account in the provisioning package, you must change the password using the **Settings** app every 42 days. If the password is not changed during that period, the account might be locked out and unable to sign in. 		![join Active Directory, Azure AD, or create a local admin account](images/account-management-details.png)
![step four](images/four.png) ![add applications](images/add-applications.png)

You can provision the kiosk app in the **Add applications** step. You can install multiple applications, both Classic Windows (Win32) apps and Universal Windows Platform (UWP) apps, in a provisioning package. The settings in this step vary according to the application that you select. For help with the settings, see [Provision PCs with apps](provision-pcs-with-apps.md)

**Warning:** If you click the plus button to add an application, you must specify an application for the provisioning package to validate. If you click the plus button in error, select any executable file in **Installer Path**, and then a **Cancel** button becomes available, allowing you to complete the provisioning package without an application. 		![add an application](images/add-applications-details.png)
![step five](images/five.png) ![add certificates](images/add-certificates.png)

To provision the device with a certificate for the kiosk app, click **Add a certificate**. Enter a name for the certificate, and then browse to and select the certificate to be used.		![add a certificate](images/add-certificates-details.png)
![step six](images/six.png) ![Configure kiosk account and app](images/kiosk-account.png)

**Important:** You must use the Windows Configuration Designer app from Windows Store to select a Classic Windows application as the kiosk app in a provisioning package.

You can create a local standard user account that will be used to run the kiosk app. If you toggle **No**, make sure that you have an existing user account to run the kiosk app.

If you want to create an account, enter the user name and password, and then toggle **Yes** or **No** to automatically sign in the account when the device starts.

In **Configure the kiosk mode app**, enter the name of the user account that will run the kiosk mode app. Select the type of app to run in kiosk mode, and then enter the path or filename (for a Classic Windows app) or the AUMID (for a Universal Windows app). For a Classic Windows app, you can use the filename if the path to the file is in the PATH environment variable, otherwise the full path is required.		![Configure kiosk account and app](images/kiosk-account-details.png)
![step seven](images/seven.png) ![configure kiosk common settings](images/kiosk-common.png)

On this step, select your options for tablet mode, the user experience on the Welcome and shutdown screens, and the timeout settings.		![set tablet mode and configure welcome and shutdown and turn off timeout settings](images/kiosk-common-details.png)
![finish](images/finish.png)

You can set a password to protect your provisioning package. You must enter this password when you apply the provisioning package to a device.		![Protect your package](images/finish-details.png)
- Go to **Computer Configuration** > **Windows Settings** > **Security Settings** > **Local Policies** >**Security Options** > **Shutdown: Allow system to be shut down without having to log on** and select **Disabled.** -- Disable the camera. +>[!NOTE] +>If you want to use the advanced editor in Windows Configuration Designer, specify the user account and app (by AUMID) in **Runtime settings** > **AssignedAccess** > **AssignedAccessSettings** - Go to **Settings** > **Privacy** > **Camera**, and turn off **Let apps use my camera**. -- Turn off app notifications on the lock screen. - Go to **Group Policy Editor** > **Computer Configuration** > **Administrative Templates\\System\\Logon\\Turn off app notifications on the lock screen**. -- Disable removable media. - Go to **Group Policy Editor** > **Computer Configuration** > **Administrative Templates\\System\\Device Installation\\Device Installation Restrictions**. Review the policy settings available in **Device Installation Restrictions** for the settings applicable to your situation. +[Learn how to apply a provisioning package.](provisioning-apply-package.md) - **Note**   - To prevent this policy from affecting a member of the Administrators group, in **Device Installation Restrictions**, enable **Allow administrators to override Device Installation Restriction policies**.   - -## Assigned access method for Universal Windows apps + +## Assigned access method for Universal Windows apps Using assigned access, Windows 10 runs the designated Universal Windows app above the lockscreen, so that the assigned access account has no access to any other functionality on the device. You have these choices for setting up assigned access: @@ -73,7 +86,7 @@ Using assigned access, Windows 10 runs the designated Universal Windows app abo | --- | --- | --- | | [Use Settings on the PC](#set-up-assigned-access-in-pc-settings) | Local standard | Pro, Enterprise, Education | | [Apply a mobile device management (MDM) policy](#set-up-assigned-access-in-mdm) | All (domain, local standard, local administrator, etc) | Enterprise, Education | -| [Create a provisioning package using Windows Imaging and Configuration Designer (ICD)](#icd) | All (domain, local standard, local administrator, etc) | Enterprise, Education | +| [Create a provisioning package using Windows Configuration Designer](#wizard) | All (domain, local standard, local administrator, etc) | Enterprise, Education | | [Run a PowerShell script](#set-up-assigned-access-using-windows-powershell) | Local standard | Pro, Enterprise, Education | @@ -88,8 +101,8 @@ Using assigned access, Windows 10 runs the designated Universal Windows app abo The Universal Windows app must be able to handle multiple views and cannot launch other apps or dialogs. -**Note**   -Assigned access does not work on a device that is connected to more than one monitor. +>[!NOTE]   +>Assigned access does not work on a device that is connected to more than one monitor.   @@ -105,7 +118,7 @@ Assigned access does not work on a device that is connected to more than one mon 5. Close **Settings** – your choices are saved automatically, and will be applied the next time that user account logs on. -To remove assigned access, in step 3, choose **Don't use assigned access**. +To remove assigned access, choose **Turn off assigned access and sign out of the selected account**. ### Set up assigned access in MDM @@ -115,69 +128,9 @@ Assigned Access has one setting, KioskModeApp. In the KioskModeApp setting, you [See the technical reference for the Assigned Access configuration service provider.](https://go.microsoft.com/fwlink/p/?LinkId=626608) -### Set up assigned access using Windows Imaging and Configuration Designer (ICD) + -Use the Windows Imaging and Configuration Designer (ICD) tool included in the Windows Assessment and Deployment Kit (ADK) for Windows 10 to create a provisioning package that configures a device as a kiosk. [Install the ADK.](https://developer.microsoft.com/windows/hardware/windows-assessment-deployment-kit) -> **Important** -When you build a provisioning package, you may include sensitive information in the project files and in the provisioning package (.ppkg) file. Although you have the option to encrypt the .ppkg file, project files are not encrypted. You should store the project files in a secure location and delete the project files when they are no longer needed. - -**Create a provisioning package for a kiosk device** - -1. Open Windows ICD (by default, %windir%\\Program Files (x86)\\Windows Kits\\10\\Assessment and Deployment Kit\\Imaging and Configuration Designer\\x86\\ICD.exe). - -2. Choose **Advanced provisioning**. - -3. Name your project, and click **Next**. - -4. Choose **All Windows desktop editions** and click **Next**. - -5. On **New project**, click **Finish**. The workspace for your package opens. - -6. Expand **Runtime settings** > **AssignedAccess**, and click **AssignedAccessSettings**. - -7. Enter a string to specify the user account and app (by AUMID). For example: - - "Account":"contoso\\\\kiosk","AUMID":"8f82d991-f842-44c3-9a95-521b58fc2084" - -8. On the **File** menu, select **Save.** - -9. On the **Export** menu, select **Provisioning package**. - -10. Change **Owner** to **IT Admin**, which will set the precedence of this provisioning package higher than provisioning packages applied to this device from other sources, and then select **Next.** - -11. Optional. In the **Provisioning package security** window, you can choose to encrypt the package and enable package signing. - - - **Enable package encryption** - If you select this option, an auto-generated password will be shown on the screen. - - - **Enable package signing** - If you select this option, you must select a valid certificate to use for signing the package. You can specify the certificate by clicking **Select** and choosing the certificate you want to use to sign the package. - -12. Click **Next** to specify the output location where you want the provisioning package to go when it's built. By default, Windows ICD uses the project folder as the output location. - - Optionally, you can click **Browse** to change the default output location. - -13. Click **Next**. - -14. Click **Build** to start building the package. The provisioning package doesn't take long to build. The project information is displayed in the build page and the progress bar indicates the build status. - - If you need to cancel the build, click **Cancel**. This cancels the current build process, closes the wizard, and takes you back to the **Customizations Page**. - -15. If your build fails, an error message will show up that includes a link to the project folder. You can scan the logs to determine what caused the error. Once you fix the issue, try building the package again. - - If your build is successful, the name of the provisioning package, output directory, and project directory will be shown. - - - If you choose, you can build the provisioning package again and pick a different path for the output package. To do this, click **Back** to change the output package name and path, and then click **Next** to start another build. - - If you are done, click **Finish** to close the wizard and go back to the **Customizations Page**. - -**Apply the provisioning package** - -1. Select the provisioning package that you want to apply, double-click the file, and then allow admin privileges. - -2. Consent to allow the package to be installed. - - After you allow the package to be installed, the settings will be applied to the device - -[Learn how to apply a provisioning package in audit mode or OOBE.](https://go.microsoft.com/fwlink/p/?LinkID=692012) ### Set up assigned access using Windows PowerShell @@ -201,7 +154,9 @@ Set-AssignedAccess -AppName -UserName Set-AssignedAccess -AppName -UserSID ``` -> **Note:** To set up assigned access using `-AppName`, the user account that you specify for assigned access must have logged on at least once. +> [!NOTE] +> To set up assigned access using `-AppName`, the user account that you specify for assigned access must have logged on at least once. + [Learn how to get the AUMID](https://go.microsoft.com/fwlink/p/?LinkId=614867). [Learn how to get the AppName](https://msdn.microsoft.com/library/windows/hardware/mt620046%28v=vs.85%29.aspx) (see **Parameters**). @@ -223,8 +178,8 @@ Edit the registry to have an account automatically logged on. 1. Open Registry Editor (regedit.exe). - **Note**   - If you are not familiar with Registry Editor, [learn how to modify the Windows registry](https://go.microsoft.com/fwlink/p/?LinkId=615002). + >[!NOTE]   + >If you are not familiar with Registry Editor, [learn how to modify the Windows registry](https://go.microsoft.com/fwlink/p/?LinkId=615002).   2. Go to @@ -239,7 +194,8 @@ Edit the registry to have an account automatically logged on. - *DefaultPassword*: set value as the password for the account. - > **Note**  If *DefaultUserName* and *DefaultPassword* aren't there, add them as **New** > **String Value**. + > [!NOTE] + > If *DefaultUserName* and *DefaultPassword* aren't there, add them as **New** > **String Value**. - *DefaultDomainName*: set value for domain, only for domain accounts. For local accounts, do not add this key. @@ -255,11 +211,15 @@ If you press **Ctrl + Alt + Del** and do not sign in to another account, after a To change the default time for assigned access to resume, add *IdleTimeOut* (DWORD) and enter the value data as milliseconds in hexadecimal. -## Shell Launcher for Classic Windows applications + +## Shell Launcher for Classic Windows applications Using Shell Launcher, you can configure a kiosk device that runs a Classic Windows application as the user interface. The application that you specify replaces the default shell (explorer.exe) that usually runs when a user logs on. +>[!NOTE] +>You can also configure a kiosk device that runs a Classic Windows application by using the [Provision kiosk devices wizard](#wizard). + ### Requirements - A domain or local user account. @@ -274,10 +234,13 @@ To set a Classic Windows application as the shell, you first turn on the Shell L **To turn on Shell Launcher in Windows features** -1. Go to Control Panel > **Programs and Features** > **Turn Windows features on or off**. -2. Select **Embedded Shell Launcher** and **OK**. +1. Go to Control Panel > **Programs and features** > **Turn Windows features on or off**. -Alternatively, you can turn on Shell Launcher using the Deployment Image Servicing and Management (DISM.exe) tool. +2. Expand **Device Lockdown**. + +2. Select **Shell Launcher** and **OK**. + +Alternatively, you can turn on Shell Launcher using Windows Configuration Designer in a provisioning package, using `SMISettings > ShellLauncher`, or the Deployment Image Servicing and Management (DISM.exe) tool. **To turn on Shell Launcher using DISM** @@ -425,19 +388,46 @@ $IsShellLauncherEnabled = $ShellLauncherClass.IsEnabled() "`nEnabled is set to " + $IsShellLauncherEnabled.Enabled ``` +## Other settings to lock down + + +For a more secure kiosk experience, we recommend that you make the following configuration changes to the device: + +- Put device in **Tablet mode**. + + If you want users to be able to use the touch (on screen) keyboard, go to **Settings** > **System** > **Tablet mode** and choose **On.** + +- Hide **Ease of access** feature on the logon screen. + + Go to **Control Panel** > **Ease of Access** > **Ease of Access Center**, and turn off all accessibility tools. + +- Disable the hardware power button. + + Go to **Power Options** > **Choose what the power button does**, change the setting to **Do nothing**, and then **Save changes**. + +- Remove the power button from the sign-in screen. + + Go to **Computer Configuration** > **Windows Settings** > **Security Settings** > **Local Policies** >**Security Options** > **Shutdown: Allow system to be shut down without having to log on** and select **Disabled.** + +- Disable the camera. + + Go to **Settings** > **Privacy** > **Camera**, and turn off **Let apps use my camera**. + +- Turn off app notifications on the lock screen. + + Go to **Group Policy Editor** > **Computer Configuration** > **Administrative Templates\\System\\Logon\\Turn off app notifications on the lock screen**. + +- Disable removable media. + + Go to **Group Policy Editor** > **Computer Configuration** > **Administrative Templates\\System\\Device Installation\\Device Installation Restrictions**. Review the policy settings available in **Device Installation Restrictions** for the settings applicable to your situation. + + >[!NOTE]   + >To prevent this policy from affecting a member of the Administrators group, in **Device Installation Restrictions**, enable **Allow administrators to override Device Installation Restriction policies**. + +  ## Related topics - -[Set up a device for anyone to use](set-up-a-device-for-anyone-to-use.md) - -[Set up a kiosk for Windows 10 for mobile edition](set-up-a-kiosk-for-windows-10-for-mobile-edition.md) - -[Manage and update Windows 10](index.md) - -  - -  - +- [Set up a kiosk on Windows 10 Mobile or Windows 10 Mobile Enterprise](set-up-a-kiosk-for-windows-10-for-mobile-edition.md) diff --git a/windows/configure/set-up-a-kiosk-for-windows-10-for-mobile-edition.md b/windows/configure/set-up-a-kiosk-for-windows-10-for-mobile-edition.md index 1a11ff9c20..3ef7f7e374 100644 --- a/windows/configure/set-up-a-kiosk-for-windows-10-for-mobile-edition.md +++ b/windows/configure/set-up-a-kiosk-for-windows-10-for-mobile-edition.md @@ -18,51 +18,18 @@ localizationpriority: high - Windows 10 Mobile -A device in kiosk mode runs a specified app with no access to other device functions, menus, or settings. You configure a device running Windows 10 Mobile or Windows 10 Mobile Enterprise for kiosk mode by using the Apps Corner feature. You can also use the Enterprise Assigned Access configuration service provider (CSP) to configure a kiosk experience. -**Note**   -The specified app must be an above lock screen app. For details on building an above lock screen app, see [Kiosk apps for assigned access: Best practices](https://go.microsoft.com/fwlink/p/?LinkId=708386). - -  - -## Apps Corner +A device in kiosk mode runs a specified app with no access to other device functions, menus, or settings. You use the [Enterprise Assigned Access](#enterprise-assigned-access) configuration service provider (CSP) to configure a kiosk experience. You can also configure a device running Windows 10 Mobile or Windows 10 Mobile Enterprise, version 1607 or earlier, for kiosk mode by using the [Apps Corner](#apps-corner) feature. (Apps Corner is removed in version 1703.) -Apps Corner lets you set up a custom Start screen on your Windows 10 Mobile or Windows 10 Mobile Enterprise device, where you can share only the apps you choose with the people you let use your device. You configure a device for kiosk mode by selecting a single app to use in Apps Corner. - -**To set up Apps Corner** - -1. On Start ![start](images/starticon.png), swipe over to the App list, then tap **Settings** ![settings](images/settingsicon.png) > **Accounts** > **Apps Corner**. - -2. Tap **Apps**, tap to select the app that you want people to use in the kiosk mode, and then tap done ![](images/doneicon.png) - -3. If your phone doesn't already have a lock screen password, you can set one now to ensure that people can't get to your Start screen from Apps Corner. Tap **Protect my phone with a password**, click **Add**, type a PIN in the **New PIN** box, type it again in the **Confirm PIN** box, and then tap **OK**. Press **Back** ![back](images/backicon.png) to the Apps Corner settings. - -4. Turn **Action center** on or off, depending on whether you want people to be able to use these features when using the device in kiosk mode. - -5. Tap **advanced**, and then turn features on or off, depending on whether you want people to be able to use them. - -6. Press **Back** ![back](images/backicon.png) when you're done. - -**To use Apps Corner** - -1. On Start ![start](images/starticon.png), swipe over to the App list, then tap **Settings** ![settings](images/settingsicon.png) > **Accounts** > **Apps Corner** > launch ![launch](images/launchicon.png). - - **Tip**   - Want to get to Apps Corner with one tap? In **Settings**, tap **Apps Corner** > **pin** to pin the Apps Corner tile to your Start screen. - -   - -2. Give the device to someone else, so they can use the device and only the one app you chose. - -3. When they're done and you get the device back, press and hold Power ![power](images/powericon.png), and then swipe right to exit Apps Corner. ## Enterprise Assigned Access -Enterprise Assigned Access allows you to lock down your Windows 10 Mobile or Windows 10 Mobile Enterprise device in kiosk mode by creating a user role that has only a single app, set to run automatically, in the Allow list. +Enterprise Assigned Access allows you to put your Windows 10 Mobile or Windows 10 Mobile Enterprise device in kiosk mode by creating a user role that has only a single app, set to run automatically, in the Allow list. -**Note**  The app can be a Universal Windows app, Universal Windows Phone 8 app, or a legacy Silverlight app. +>[!NOTE] +>The app can be a Universal Windows app, Universal Windows Phone 8 app, or a legacy Silverlight app.   @@ -72,21 +39,24 @@ In AssignedAccessXml, for Application, you enter the product ID for the app to r [See the technical reference for the Enterprise Assigned Access configuration service provider (CSP).](https://go.microsoft.com/fwlink/p/?LinkID=618601) -### Set up assigned access using Windows Imaging and Configuration Designer (ICD) +### Set up assigned access using Windows Configuration Designer -> **Important** -When you build a provisioning package, you may include sensitive information in the project files and in the provisioning package (.ppkg) file. Although you have the option to encrypt the .ppkg file, project files are not encrypted. You should store the project files in a secure location and delete the project files when they are no longer needed. +>[!IMPORTANT] +>When you build a provisioning package, you may include sensitive information in the project files and in the provisioning package (.ppkg) file. Although you have the option to encrypt the .ppkg file, project files are not encrypted. You should store the project files in a secure location and delete the project files when they are no longer needed. -**To create and apply a provisioning package for a kiosk device** +#### Create the *AssignedAccess*.xml file 1. Create an *AssignedAccess*.xml file that specifies the app the device will run. (You can name use any file name.) For instructions on AssignedAccessXml, see [EnterpriseAssignedAccess CSP](https://go.microsoft.com/fwlink/p/?LinkID=618601). - **Note**   - Do not escape the xml in *AssignedAccess*.xml file as Windows Imaging and Configuration Designer (ICD) will do that when building the package. Providing escaped xml in Windows ICD will cause building the package fail. + >[!NOTE] + >Do not escape the xml in *AssignedAccess*.xml file as Windows Configuration Designer will do that when building the package. Providing escaped xml in Windows ICD will cause building the package fail. + +#### Create the provisioning package -   +1. [Install Windows Configuration Designer.](provisioning-install-icd.md) + +2. Open Windows Configuration Designer (if you installed it from the Windows ADK, `%windir%\\Program Files (x86)\\Windows Kits\\10\\Assessment and Deployment Kit\\Imaging and Configuration Designer\\x86\\ICD.exe`). -2. Open Windows ICD (by default, `%windir%\\Program Files (x86)\\Windows Kits\\10\\Assessment and Deployment Kit\\Imaging and Configuration Designer\\x86\\ICD.exe`). 3. Choose **Advanced provisioning**. @@ -130,55 +100,91 @@ When you build a provisioning package, you may include sensitive information in - If you choose, you can build the provisioning package again and pick a different path for the output package. To do this, click **Back** to change the output package name and path, and then click **Next** to start another build. - If you are done, click **Finish** to close the wizard and go back to the **Customizations Page**. -17. Select the **output location** link to go to the location of the package. You can distribute that .ppkg to mobile devices using any of the following methods: +17. Select the **output location** link to go to the location of the package. - - Removable media (USB/SD) +#### Distribute the provisioning package - **To apply a provisioning package from removable media** +You can distribute that .ppkg to mobile devices using any of the following methods: - 1. Copy the provisioning package file to the root directory on a micro SD card. +- Removable media (USB/SD) - 2. On the device, insert the micro SD card containing the provisioning package. + **To apply a provisioning package from removable media** - 3. Go to **Settings** > **Accounts** > **Provisioning.** + 1. Copy the provisioning package file to the root directory on a micro SD card. - 4. Tap **Add a package**. + 2. On the device, insert the micro SD card containing the provisioning package. - 5. On the **Choose a method** screen, in the **Add from** dropdown menu, select **Removable Media**. + 3. Go to **Settings** > **Accounts** > **Provisioning.** - 6. Select a package will list all available provisioning packages on the micro SD card. Tap the desired package, and then tap **Add**. + 4. Tap **Add a package**. - 7. You will see a message that tells you what the package will do the device, such as **Adding it will: Lock down the user interface**. Tap **Yes, add it**. + 5. On the **Choose a method** screen, in the **Add from** dropdown menu, select **Removable Media**. - 8. Restart the device and verify that the runtime settings that were configured in the provisioning package were applied to the device. + 6. Select a package will list all available provisioning packages on the micro SD card. Tap the desired package, and then tap **Add**. - - Email + 7. You will see a message that tells you what the package will do the device, such as **Adding it will: Lock down the user interface**. Tap **Yes, add it**. - **To apply a provisioning package sent in email** + 8. Restart the device and verify that the runtime settings that were configured in the provisioning package were applied to the device. - 1. Send the provisioning package in email to an account on the device. +- Email - 2. Open the email on the device, and then double-tap the attached file. + **To apply a provisioning package sent in email** - 3. You will see a message that tells you what the package will do the device, such as **Adding it will: Lock down the user interface**. Tap **Yes, add it**. + 1. Send the provisioning package in email to an account on the device. - 4. Restart the device and verify that the runtime settings that were configured in the provisioning package were applied to the device. + 2. Open the email on the device, and then double-tap the attached file. - - USB tether (mobile only) + 3. You will see a message that tells you what the package will do the device, such as **Adding it will: Lock down the user interface**. Tap **Yes, add it**. - **To apply a provisioning package using USB tether** + 4. Restart the device and verify that the runtime settings that were configured in the provisioning package were applied to the device. - 1. Connect the device to your PC by USB. +- USB tether - 2. Select the provisioning package that you want to use to provision the device, and then drag and drop the file to your device. + **To apply a provisioning package using USB tether** - 3. The provisioning package installation dialog will appear on the phone. + 1. Connect the device to your PC by USB. - 4. You will see a message that tells you what the package will do the device, such as **Adding it will: Lock down the user interface**. Tap **Yes, add it**. + 2. Select the provisioning package that you want to use to provision the device, and then drag and drop the file to your device. - 5. Restart the device and verify that the runtime settings that were configured in the provisioning package were applied to the device. + 3. The provisioning package installation dialog will appear on the phone. - [Learn how to apply a provisioning package in audit mode or OOBE.](https://go.microsoft.com/fwlink/p/?LinkID=692012) + 4. You will see a message that tells you what the package will do the device, such as **Adding it will: Lock down the user interface**. Tap **Yes, add it**. + + 5. Restart the device and verify that the runtime settings that were configured in the provisioning package were applied to the device. + + + +## Apps Corner + +>[!NOTE] +>For Windows 10, versions 1507, 1511, and 1607 only. + +Apps Corner lets you set up a custom Start screen on your Windows 10 Mobile or Windows 10 Mobile Enterprise device, where you can share only the apps you choose with the people you let use your device. You configure a device for kiosk mode by selecting a single app to use in Apps Corner. + +**To set up Apps Corner** + +1. On Start ![start](images/starticon.png), swipe over to the App list, then tap **Settings** ![settings](images/settingsicon.png) > **Accounts** > **Apps Corner**. + +2. Tap **Apps**, tap to select the app that you want people to use in the kiosk mode, and then tap done ![](images/doneicon.png) + +3. If your phone doesn't already have a lock screen password, you can set one now to ensure that people can't get to your Start screen from Apps Corner. Tap **Protect my phone with a password**, click **Add**, type a PIN in the **New PIN** box, type it again in the **Confirm PIN** box, and then tap **OK**. Press **Back** ![back](images/backicon.png) to the Apps Corner settings. + +4. Turn **Action center** on or off, depending on whether you want people to be able to use these features when using the device in kiosk mode. + +5. Tap **advanced**, and then turn features on or off, depending on whether you want people to be able to use them. + +6. Press **Back** ![back](images/backicon.png) when you're done. + +**To use Apps Corner** + +1. On Start ![start](images/starticon.png), swipe over to the App list, then tap **Settings** ![settings](images/settingsicon.png) > **Accounts** > **Apps Corner** > launch ![launch](images/launchicon.png). + + >[!TIP]   + >Want to get to Apps Corner with one tap? In **Settings**, tap **Apps Corner** > **pin** to pin the Apps Corner tile to your Start screen. +   +2. Give the device to someone else, so they can use the device and only the one app you chose. + +3. When they're done and you get the device back, press and hold Power ![power](images/powericon.png), and then swipe right to exit Apps Corner. ## Related topics @@ -191,9 +197,5 @@ When you build a provisioning package, you may include sensitive information in   -  - - - diff --git a/windows/configure/set-up-shared-or-guest-pc.md b/windows/configure/set-up-shared-or-guest-pc.md index f641f80569..d0998d18c6 100644 --- a/windows/configure/set-up-shared-or-guest-pc.md +++ b/windows/configure/set-up-shared-or-guest-pc.md @@ -16,7 +16,7 @@ localizationpriority: high - Windows 10 -Windows 10, version 1607, introduces *shared PC mode*, which optimizes Windows 10 for shared use scenarios, such as touchdown spaces in an enterprise and temporary customer use in retail. You can apply shared PC mode to Windows 10 Pro, Pro Education, Education, and Enterprise. +Windows 10, version 1607, introduced *shared PC mode*, which optimizes Windows 10 for shared use scenarios, such as touchdown spaces in an enterprise and temporary customer use in retail. You can apply shared PC mode to Windows 10 Pro, Pro Education, Education, and Enterprise. > [!NOTE] > If you're interested in using Windows 10 for shared PCs in a school, see [Use Set up School PCs app](https://technet.microsoft.com/edu/windows/use-set-up-school-pcs-app) which provides a simple way to configure PCs with shared PC mode plus additional settings specific for education. @@ -69,16 +69,16 @@ You can configure Windows to be in shared PC mode in a couple different ways: ![custom OMA-URI policy in Intune](images/oma-uri-shared-pc.png) -- A provisioning package created with the Windows Imaging and Configuration Designer (ICD): You can apply a provisioning package when you initially set up the PC (also known as the out-of-box-experience or OOBE), or you can apply the provisioning package to a Windows 10 PC that is already in use. The provisioning package is created in Windows Imaging and Configuration Designer (ICD). Shared PC mode is enabled by the [SharedPC configuration service provider (CSP)](https://msdn.microsoft.com/library/windows/hardware/mt723294.aspx), exposed in ICD as SharedPC. +- A provisioning package created with the Windows Configuration Designer: You can apply a provisioning package when you initially set up the PC (also known as the out-of-box-experience or OOBE), or you can apply the provisioning package to a Windows 10 PC that is already in use. The provisioning package is created in Windows Configuration Designer. Shared PC mode is enabled by the [SharedPC configuration service provider (CSP)](https://msdn.microsoft.com/library/windows/hardware/mt723294.aspx), exposed in Windows Configuration Designer as **SharedPC**. ![Shared PC settings in ICD](images/icd-adv-shared-pc.png) ### Create a provisioning package for shared use -Use the Windows ICD tool included in the Windows Assessment and Deployment Kit (ADK) for Windows 10 to create a provisioning package that configures a device for shared PC mode. [Install the ADK and select **Configuration Designer**.](https://developer.microsoft.com/windows/hardware/windows-assessment-deployment-kit) +1. [install Windows Configuration Designer](provisioning-install-icd.md) -1. Open Windows ICD (by default, %windir%\\Program Files (x86)\\Windows Kits\\10\\Assessment and Deployment Kit\\Imaging and Configuration Designer\\x86\\ICD.exe). +1. Open Windows Configuration Designer. 2. On the **Start page**, select **Advanced provisioning**. @@ -287,15 +287,10 @@ Shared PC mode sets local group policies to configure the device. Some of these -## Related topics - -[Set up a device for anyone to use (kiosk)](set-up-a-device-for-anyone-to-use.md)   -  - diff --git a/windows/configure/settings-that-can-be-locked-down.md b/windows/configure/settings-that-can-be-locked-down.md index c0348677ba..6e0e342400 100644 --- a/windows/configure/settings-that-can-be-locked-down.md +++ b/windows/configure/settings-that-can-be-locked-down.md @@ -20,7 +20,15 @@ localizationpriority: high This topic lists the settings and quick actions that can be locked down in Windows 10 Mobile. -## Settings lockdown +## Settings lockdown in Windows 10, version 1703 + +In earlier versions of Windows 10, you used the page name to define allowed settings. Starting in Windows 10, version 1703, you use the settings URI. + +For example, in place of **SettingsPageDisplay**, you would use **ms-settings:display**. + +See the [ms-settings: URI scheme reference](https://docs.microsoft.com/windows/uwp/launch-resume/launch-settings-app#ms-settings-uri-scheme-reference) to find the URI for each Settings page. + +## Settings lockdown in Windows 10, version 1607 and earlier You can use Lockdown.xml to configure lockdown settings. @@ -451,52 +459,26 @@ You can specify the quick actions as follows: ``` syntax - - - - - - - - - - - - - - + + + + + + + + + + + + + + ``` -Some quick actions are dependent on related settings pages/page groups. When a dependent page/group is not available, then the corresponding quick action will also be hidden. -**Note**   -Dependent settings group/pages will be automatically enabled when a quick action is specified in the lockdown xml file. For example, if the Rotation quick setting is specified, the following group and page will automatically be added to the allow list: “SettingsPageSystemDisplay” and “SettingsPageDisplay”. - -  - -The following table lists the dependencies between quick actions and Settings groups/pages. - -| Quick action | Settings group | Settings page | -|-----|-------|-------| -| SystemSettings\_System\_Display\_QuickAction\_Brightness | SettingsPageSystemDisplay| SettingsPageDisplay | -| SystemSettings\_System\_Display\_Internal\_Rotation | SettingsPageSystemDisplay | SettingsPageDisplay | -| SystemSettings\_QuickAction\_WiFi | SettingsPageNetworkWiFi | SettingsPageNetworkWiFi | -| SystemSettings\_QuickAction\_InternetSharing | SettingsPageNetworkInternetSharing | SettingsPageNetworkInternetSharing | -| SystemSettings\_QuickAction\_CellularData | SettingsGroupCellular | SettingsPageNetworkCellular | -| SystemSettings\_QuickAction\_AirplaneMode | SettingsPageNetworkAirplaneMode | SettingsPageNetworkAirplaneMode | -| SystemSettings\_Privacy\_LocationEnabledUserPhone | SettingsGroupPrivacyLocationGlobals | SettingsPagePrivacyLocation | -| SystemSettings\_Network\_VPN\_QuickAction | SettingsPageNetworkVPN | SettingsPageNetworkVPN | -| SystemSettings\_Launcher\_QuickNote | N/A | N/A | -| SystemSettings\_Flashlight\_Toggle | N/A | N/A | -| SystemSettings\_Device\_BluetoothQuickAction | SettingsPagePCSystemBluetooth | SettingsPagePCSystemBluetooth | -| SystemSettings\_BatterySaver\_LandingPage\_OverrideControl | BatterySaver\_LandingPage\_SettingsConfiguration | SettingsPageBatterySaver | -| QuickActions\_Launcher\_DeviceDiscovery | N/A | N/A | -| QuickActions\_Launcher\_AllSettings | N/A | N/A | -| SystemSettings\_QuickAction\_QuietHours | N/A | N/A | -| SystemSettings\_QuickAction\_Camera | N/A | N/A |   diff --git a/windows/configure/start-layout-xml-desktop.md b/windows/configure/start-layout-xml-desktop.md index db4bf8dd66..2a8a20dfd2 100644 --- a/windows/configure/start-layout-xml-desktop.md +++ b/windows/configure/start-layout-xml-desktop.md @@ -30,6 +30,9 @@ On Windows 10 for desktop editions, the customized Start works by: >[!NOTE] >Using the layout modification XML to configure Start is not supported with roaming user profiles. For more information, see [Deploy Roaming User Profiles](https://technet.microsoft.com/en-US/library/jj649079.aspx). +>[!NOTE] +>Using the layout modification XML to configure Start is not supported with roaming user profiles. For more information, see [Deploy Roaming User Profiles](https://technet.microsoft.com/library/jj649079.aspx). + ## LayoutModification XML IT admins can provision the Start layout using a LayoutModification.xml file. This file supports several mechanisms to modify or replace the default Start layout and its tiles. The easiest method for creating a LayoutModification.xml file is by using the Export-StartLayout cmdlet; see [Customize and export Start layout](customize-and-export-start-layout.md) for instructions. @@ -473,17 +476,13 @@ Once you have created the LayoutModification.xml file and it is present in the d ## Related topics -[Manage Windows 10 Start layout options](windows-10-start-layout-options-and-policies.md) - -[Configure Windows 10 taskbar](configure-windows-10-taskbar.md) - -[Customize Windows 10 Start and taskbar with Group Policy](customize-windows-10-start-screens-by-using-group-policy.md) - -[Customize Windows 10 Start and taskbar with ICD and provisioning packages](customize-windows-10-start-screens-by-using-provisioning-packages-and-icd.md) - -[Customize Windows 10 Start with mobile device management (MDM)](customize-windows-10-start-screens-by-using-mobile-device-management.md) - -[Changes to Group Policy settings for Windows 10 Start](changes-to-start-policies-in-windows-10.md) +- [Manage Windows 10 Start layout options](windows-10-start-layout-options-and-policies.md) +- [Configure Windows 10 taskbar](configure-windows-10-taskbar.md) +- [Customize Windows 10 Start and taskbar with Group Policy](customize-windows-10-start-screens-by-using-group-policy.md) +- [Customize Windows 10 Start and taskbar with ICD and provisioning packages](customize-windows-10-start-screens-by-using-provisioning-packages-and-icd.md) +- [Customize Windows 10 Start with mobile device management (MDM)](customize-windows-10-start-screens-by-using-mobile-device-management.md) +- [Changes to Group Policy settings for Windows 10 Start](changes-to-start-policies-in-windows-10.md) +- [Start layout XML for mobile editions of Windows 10 (reference)](start-layout-xml-mobile.md)   diff --git a/windows/configure/start-layout-xml-mobile.md b/windows/configure/start-layout-xml-mobile.md index 9d10466302..f25c2d2413 100644 --- a/windows/configure/start-layout-xml-mobile.md +++ b/windows/configure/start-layout-xml-mobile.md @@ -370,17 +370,13 @@ This should set the value of **StartLayout**. The setting appears in the **Selec ## Related topics -[Manage Windows 10 Start layout options](windows-10-start-layout-options-and-policies.md) - -[Configure Windows 10 taskbar](configure-windows-10-taskbar.md) - -[Customize Windows 10 Start and taskbar with Group Policy](customize-windows-10-start-screens-by-using-group-policy.md) - -[Customize Windows 10 Start and taskbar with ICD and provisioning packages](customize-windows-10-start-screens-by-using-provisioning-packages-and-icd.md) - -[Customize Windows 10 Start with mobile device management (MDM)](customize-windows-10-start-screens-by-using-mobile-device-management.md) - -[Changes to Group Policy settings for Windows 10 Start](changes-to-start-policies-in-windows-10.md) +- [Manage Windows 10 Start layout options](windows-10-start-layout-options-and-policies.md) +- [Configure Windows 10 taskbar](configure-windows-10-taskbar.md) +- [Customize Windows 10 Start and taskbar with Group Policy](customize-windows-10-start-screens-by-using-group-policy.md) +- [Customize Windows 10 Start and taskbar with ICD and provisioning packages](customize-windows-10-start-screens-by-using-provisioning-packages-and-icd.md) +- [Customize Windows 10 Start with mobile device management (MDM)](customize-windows-10-start-screens-by-using-mobile-device-management.md) +- [Changes to Group Policy settings for Windows 10 Start](changes-to-start-policies-in-windows-10.md) +- [Start layout XML for desktop editions of Windows 10 (reference)](start-layout-xml-desktop.md)   diff --git a/windows/configure/start-taskbar-lockscreen.md b/windows/configure/start-taskbar-lockscreen.md index 3216cfabda..966ef97fca 100644 --- a/windows/configure/start-taskbar-lockscreen.md +++ b/windows/configure/start-taskbar-lockscreen.md @@ -1,7 +1,6 @@ --- -title: start tasbkar lockscreen (Windows 10) +title: Configure Start layout, taskbar, and lock screen for Windows 10 PCs (Windows 10) description: -keywords: Windows 10, MDM, WSUS, Windows update ms.prod: w10 ms.mktglfcycl: manage ms.sitesec: library @@ -10,5 +9,19 @@ localizationpriority: high author: jdeckerMS --- -# start taskbar lockscreen +# Configure Start layout, taskbar, and lock screen for Windows 10 PCs + + +## In this section + +| Topic | Description | +| --- | --- | +| [Windows Spotlight on the lock screen](windows-spotlight.md) | Windows Spotlight is an option for the lock screen background that displays different background images and occasionally offers suggestions on the lock screen.

**Note:** You can also use the [Personalization CSP](https://msdn.microsoft.com/windows/hardware/commercialize/customize/mdm/personalization-csp) settings to set lock screen and desktop background images. | +| [Manage Windows 10 and Windows Store tips, tricks, and suggestions](manage-tips-and-suggestions.md) | Options to manage the tips, tricks, and suggestions offered by Windows and Windows Store. | +| [Manage Windows 10 Start and taskbar layout](windows-10-start-layout-options-and-policies.md) | Organizations might want to deploy a customized Start screen and menu to devices running Windows 10 Pro, Enterprise, or Education. A standard Start layout can be useful on devices that are common to multiple users and devices that are locked down for specialized purposes. | + + +## Related topics + +- [Configure Windows 10 Mobile devices](configure-mobile.md) \ No newline at end of file diff --git a/windows/configure/windows-10-start-layout-options-and-policies.md b/windows/configure/windows-10-start-layout-options-and-policies.md index b588216cb5..d4669bfaed 100644 --- a/windows/configure/windows-10-start-layout-options-and-policies.md +++ b/windows/configure/windows-10-start-layout-options-and-policies.md @@ -1,6 +1,6 @@ --- title: Manage Windows 10 Start and taskbar layout (Windows 10) -description: Organizations might want to deploy a customized Start and taskbar layout to devices running Windows 10 Enterprise or Windows 10 Education. +description: Organizations might want to deploy a customized Start and taskbar layout to devices. ms.assetid: 2E94743B-6A49-463C-9448-B7DD19D9CD6A keywords: ["start screen", "start menu"] ms.prod: w10 @@ -19,12 +19,15 @@ localizationpriority: high > **Looking for consumer information?** See [Customize the Start menu](http://windows.microsoft.com/windows-10/getstarted-see-whats-on-the-menu) -Organizations might want to deploy a customized Start and taskbar configuration to devices running Windows 10 Enterprise or Windows 10 Education. A standard, customized Start layout can be useful on devices that are common to multiple users and devices that are locked down for specialized purposes. Configuring the taskbar allows the organization to pin useful apps for their employees and to remove apps that are pinned by default. +Organizations might want to deploy a customized Start and taskbar configuration to devices running Windows 10 Pro, Enterprise, or Education. A standard, customized Start layout can be useful on devices that are common to multiple users and devices that are locked down for specialized purposes. Configuring the taskbar allows the organization to pin useful apps for their employees and to remove apps that are pinned by default. >[!NOTE] >Taskbar configuration is available starting in Windows 10, version 1607. > ->Using the layout modification XML to configure Start is not supported with roaming user profiles. For more information, see [Deploy Roaming User Profiles](https://technet.microsoft.com/en-US/library/jj649079.aspx). +>Start and taskbar configuration can be applied to devices running Windows 10 Pro, version 1703. +> +>Using the layout modification XML to configure Start is not supported with roaming user profiles. For more information, see [Deploy Roaming User Profiles](https://technet.microsoft.com/library/jj649079.aspx). + ## Start options @@ -34,87 +37,21 @@ Some areas of Start can be managed using Group Policy. The layout of Start tiles The following table lists the different parts of Start and any applicable policy settings or Settings options. Group Policy settings are in the **User Configuration**\\**Administrative Templates**\\**Start Menu and Taskbar** path except where a different path is listed in the table. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
StartPolicySetting
User tileGroup Policy: Remove Logoff on the Start menu
Most usedGroup Policy: Remove frequent programs from the Start menuSettings > Personalization > Start > Show most used apps

Suggestions

-

-and-

-

Dynamically inserted app tile

MDM: Allow Windows Consumer Features

-

Group Policy: Computer Configuration\\Administrative Templates\\Windows Components\\Cloud Content\\Turn off Microsoft consumer experiences

-
-Note   -

This policy also enables or disables notifications for a user's Microsoft account and app tiles from Microsoft dynamically inserted in the default Start menu.

-
-
-  -
Settings > Personalization > Start > Occasionally show suggestions in Start
Recently addednot applicableSettings > Personalization > Start > Show recently added apps
Pinned foldersnot applicableSettings > Personalization > Start > Choose which folders appear on Start
PowerGroup Policy: Remove and prevent access to the Shut Down, Restart, Sleep, and Hibernate commandsNone
Start layout

MDM: Start layout

-

Group Policy: Start layout

-

Group Policy: Prevent users from customizing their Start Screen

-
-Note   -

When a full Start screen layout is imported with Group Policy or MDM, the users cannot pin, unpin, or uninstall apps from the Start screen. Users can view and open all apps in the All Apps view, but they cannot pin any apps to the Start screen. When a partial Start screen layout is imported, users cannot change the tile groups applied by the partial layout, but can modify other tile groups and create their own.

Start layout policy can be used to pin apps to the taskbar based on an XML File that you provide. Users will be able to change the order of pinned apps, unpin apps, and pin additional apps to the taskbar. -

-
-  -
None
Jump listsGroup Policy: Do not keep history of recently opened documentsSettings > Personalization > Start > Show recently opened items in Jump Lists on Start or the taskbar
Start size

MDM: Force Start size

-

Group Policy: Force Start to be either full screen size or menu size

Settings > Personalization > Start > Use Start full screen
All SettingsGroup Policy: Prevent changes to Taskbar and Start Menu SettingsNone
+| Start | Policy | Local setting | +| --- | --- | --- | +| User tile | MDM: **Start/HideUserTile**
**Start/HideSwitchAccount**
**Start/HideSignOut**
**Start/HideLock**
**Start/HideChangeAccountSettings**

Group Policy: **Remove Logoff on the Start menu** | none | +| Most used | MDM: **Start/HideFrequentlyUsedApps**

Group Policy: **Remove frequent programs from the Start menu** | **Settings** > **Personalization** > **Start** > **Show most used apps** | +| Suggestions
-and-
Dynamically inserted app tile | MDM: **Allow Windows Consumer Features**

Group Policy: **Computer Configuration\Administrative Templates\Windows Components\Cloud Content\Turn off Microsoft consumer experiences**

**Note:** This policy also enables or disables notifications for a user's Microsoft account and app tiles from Microsoft dynamically inserted in the default Start menu. | **Settings** > **Personalization** > **Start** > **Occasionally show suggestions in Start** | +| Recently added | MDM: **Start/HideRecentlyAddedApps** | **Settings** > **Personalization** > **Start** > **Show recently added apps** | +| Pinned folders | MDM: **AllowPinnedFolder** | **Settings** > **Personalization** > **Start** > **Choose which folders appear on Start** | +| Power | MDM: **Start/HidePowerButton**
**Start/HideHibernate**
**Start/HideRestart**
**Start/HideShutDown**
**Start/HideSleep**

Group Policy: **Remove and prevent access to the Shut Down, Restart, Sleep, and Hibernate commands** | none | +| Start layout | MDM: **Start layout**
**ImportEdgeAssets**

Group Policy: **Prevent users from customizing their Start screen**

**Note:** When a full Start screen layout is imported with Group Policy or MDM, the users cannot pin, unpin, or uninstall apps from the Start screen. Users can view and open all apps in the **All Apps** view, but they cannot pin any apps to the Start screen. When a partial Start screen layout is imported, users cannot change the tile groups applied by the partial layout, but can modify other tile groups and create their own.

**Start layout** policy can be used to pin apps to the taskbar based on an XML File that you provide. Users will be able to change the order of pinned apps, unpin apps, and pin additional apps to the taskbar. | none | +| Jump lists | MDM: **Start/HideRecentJumplists**

Group Policy: **Do not keep history of recently opened documents** | **Settings** > **Personalization** > **Start** > **Show recently opened items in Jump Lists on Start or the taskbar** | +| Start size | MDM: **Force Start size**

Group Policy: **Force Start to be either full screen size or menu size** | **Settings** > **Personalization** > **Start** > **Use Start full screen** | +| App list | MDM: **Start/HideAppList** | **Settings** > **Personalization** > **Start** > **Show app list in Start menu** | +| All Settings | Group Policy: **Prevent changes to Taskbar and Start Menu Settings** | none | +| Taskbar | MDM: **Start/NoPinningToTaskbar** | none | +  ## Taskbar options @@ -125,15 +62,18 @@ There are three categories of apps that might be pinned to a taskbar: * Default Windows apps, pinned during operating system installation (Microsoft Edge, File Explorer, Store) * Apps pinned by the enterprise, such as in an unattended Windows setup - **Note**   - The earlier method of using [TaskbarLinks](https://go.microsoft.com/fwlink/p/?LinkId=761230) in an unattended Windows setup file is deprecated in Windows 10, version 1607. + >[!NOTE] + >The earlier method of using [TaskbarLinks](https://go.microsoft.com/fwlink/p/?LinkId=761230) in an unattended Windows setup file is deprecated in Windows 10, version 1607. The following example shows how apps will be pinned - Windows default apps to the left (blue circle), apps pinned by the user in the center (orange triangle), and apps that you pin using XML to the right (green square). -> **Note**  In operating systems configured to use a right-to-left language, the taskbar order will be reversed. - ![Windows left, user center, enterprise to the right](images/taskbar-generic.png) +>[!NOTE] +>In operating systems configured to use a right-to-left language, the taskbar order will be reversed. + + + Whether you apply the taskbar configuration to a clean install or an update, users will still be able to: * Pin additional apps * Change the order of pinned apps diff --git a/windows/configure/windows-spotlight.md b/windows/configure/windows-spotlight.md index eb3af0eb51..c3a078d793 100644 --- a/windows/configure/windows-spotlight.md +++ b/windows/configure/windows-spotlight.md @@ -1,5 +1,5 @@ --- -title: Windows Spotlight on the lock screen (Windows 10) +title: Configure Windows Spotlight on the lock screen (Windows 10) description: Windows Spotlight is an option for the lock screen background that displays different background images on the lock screen. ms.assetid: 1AEA51FA-A647-4665-AD78-2F3FB27AD46A keywords: ["lockscreen"] @@ -10,13 +10,14 @@ author: jdeckerMS localizationpriority: high --- -# Windows Spotlight on the lock screen +# Configure Windows Spotlight on the lock screen **Applies to** - Windows 10 + Windows Spotlight is an option for the lock screen background that displays different background images and occasionally offers suggestions on the lock screen. Windows Spotlight is available in all desktop editions of Windows 10. For managed devices running Windows 10 Enterprise and Windows 10 Education, enterprise administrators can configure a mobile device management (MDM) or Group Policy setting to prevent users from using the Windows Spotlight background. For managed devices running Windows 10 Pro, version 1607, administrators can disable suggestions for third party apps. @@ -24,6 +25,8 @@ For managed devices running Windows 10 Enterprise and Windows 10 Education, en >[!NOTE] >In Windows 10, version 1607, the lock screen background does not display if you disable the **Animate windows when minimizing and mazimizing** setting in **This PC** > **Properties** > **Advanced system settings** > **Performance settings** > **Visual Effects**, or if you enable the Group Policy setting **Computer Configuration** > **Administrative Templates** > **Windows Components** > **Desktop Windows Manager** > **Do not allow windows animations**. +> +>In Windows 10, version 1703, you can use the [Personalization CSP](https://msdn.microsoft.com/windows/hardware/commercialize/customize/mdm/personalization-csp) settings to set lock screen and desktop background images. ## What does Windows Spotlight include? @@ -37,6 +40,8 @@ For managed devices running Windows 10 Enterprise and Windows 10 Education, en - **Feature suggestions, fun facts, tips** The lock screen background will occasionally suggest Windows 10 features that the user hasn't tried yet, such as **Snap assist**. + + ![fun facts](images/funfacts.png) ## How do you turn off Windows Spotlight locally? @@ -48,27 +53,28 @@ To turn off Windows Spotlight locally, go to **Settings** > **Personalization ## How do you disable Windows Spotlight for managed devices? -Windows 10, version 1607, provides three new Group Policy settings to help you manage Windows Spotlight on enterprise computers. +Windows Spotlight is enabled by default. Windows 10 provides Group Policy and mobile device management (MDM) settings to help you manage Windows Spotlight on enterprise computers. -**Windows 10 Pro, Enterprise, and Education** +| Group Policy | MDM | Description | Applies to | +| --- | --- | --- | --- | +| **User Configuration\Administrative Templates\Windows Components\Cloud Content\Do not suggest third-party content in Windows spotlight** | **Experience/Allow ThirdParty Suggestions In Windows Spotlight** | Enables enterprises to restrict suggestions to Microsoft apps and services | Windows 10 Pro, Enterprise, and Education, version 1607 and later | +| **User Configuration\Administrative Templates\Windows Components\Cloud Content\Turn off all Windows Spotlight features** | **Experience/Allow Windows Spotlight** | Enables enterprises to completely disable all Windows Spotlight features in a single setting | Windows 10 Enterprise and Education, version 1607 and later | +| **User Configuration\Administrative Templates\Windows Components\Cloud Content\Configure Spotlight on lock screen** | **Experience/Configure Windows Spotlight On Lock Screen** | Specifically controls the use of the dynamic Windows Spotlight image on the lock screen, and can be enabled or disabled | Windows 10 Enterprise and Education, version 1607 and later | +| **Administrative Templates \ Windows Components \ Cloud Content \ Turn off the Windows Spotlight on Action Center** | **Experience/Allow Windows Spotlight On Action Center** | Turn off Suggestions from Microsoft that show after each clean install, upgrade, or on an on-going basis to introduce users to what is new or changed | Windows 10 Enterprise and Education, version 1703 | +| **User Configuration \ Administrative Templates \ Windows Components \ Cloud Content \ Do not use diagnostic data for tailored experiences** | **Experience/Allow Tailored Experiences With Diagnostic Data** | Prevent Windows from using diagnostic data to provide tailored experiences to the user | Windows 10 Pro, Enterprise, and Education, version 1703 | +| **User Configuration \ Administrative Templates \ Windows Components \ Cloud Content \ Turn off the Windows Welcome Experience** | **Experience/Allow Windows Spotlight Windows Welcome Experience** | Turn off the Windows Spotlight Windows Welcome experience which helps introduce users to Windows, such as launching Microsoft Edge with a web page highlighting new features | Windows 10 Enterprise and Education, version 1703 | -- **User Configuration\Administrative Templates\Windows Components\Cloud Content\Do not suggest third-party content in Windows spotlight** enables enterprises to restrict suggestions to Microsoft apps and services. -**Windows 10 Enterprise and Education** - -* **User Configuration\Administrative Templates\Windows Components\Cloud Content\Turn off all Windows Spotlight features** enables enterprises to completely disable all Windows Spotlight features in a single setting. -* **User Configuration\Administrative Templates\Windows Components\Cloud Content\Configure Spotlight on lock screen** specifically controls the use of the dynamic Windows Spotlight image on the lock screen, and can be enabled or disabled. (The Group Policy setting **Enterprise Spotlight** does not work in Windows 10, version 1607.) - -Windows Spotlight is enabled by default. Administrators can replace Windows Spotlight with a selected image using the Group Policy setting **Computer Configuration** > **Administrative Templates** > **Control Panel** > **Personalization** > **Force a specific default lock screen image**. + In addition to the specific policy settings for Windows Spotlight, administrators can replace Windows Spotlight with a selected image using the Group Policy setting **Computer Configuration** > **Administrative Templates** > **Control Panel** > **Personalization** > **Force a specific default lock screen image**. >[!WARNING] > In Windows 10, version 1607, the **Force a specific default lock screen image** policy setting will prevent users from changing the lock screen image. This behavior will be corrected in a future release. ![lockscreen policy details](images/lockscreenpolicy.png) -Pay attention to the checkbox in **Options**. In addition to providing the path to the lock screen image, administrators can choose to allow or **Turn off fun facts, tips, tricks, and more on lock screen**. If the checkbox is not selected, users will see the lock screen image that is defined in the policy setting, and will also see occasional messages, such as the example in the following image. +Pay attention to the checkbox in **Options**. In addition to providing the path to the lock screen image, administrators can choose to allow or **Turn off fun facts, tips, tricks, and more on lock screen**. If the checkbox is not selected, users will see the lock screen image that is defined in the policy setting, and will also see occasional messages. + -![fun facts](images/funfacts.png) ## Related topics diff --git a/windows/deploy/images/icd-create-options-1703.PNG b/windows/deploy/images/icd-create-options-1703.PNG new file mode 100644 index 0000000000..007e740683 Binary files /dev/null and b/windows/deploy/images/icd-create-options-1703.PNG differ diff --git a/windows/deploy/images/ur-arch-diagram.png b/windows/deploy/images/ur-arch-diagram.png new file mode 100644 index 0000000000..9c1da1227c Binary files /dev/null and b/windows/deploy/images/ur-arch-diagram.png differ diff --git a/windows/deploy/mbr-to-gpt.md b/windows/deploy/mbr-to-gpt.md index 5775e4b633..e0c160b723 100644 --- a/windows/deploy/mbr-to-gpt.md +++ b/windows/deploy/mbr-to-gpt.md @@ -378,7 +378,6 @@ In this example, Disk 0 is formatted with the MBR partition style, and Disk 1 is ## Related topics -[Using MBR2GPT with Configuration Manager OSD](https://miketerrill.net/tag/mbr2gpt/) -
[Windows 10 Enterprise system requirements](https://technet.microsoft.com/en-us/windows/dn798752.aspx) +[Windows 10 Enterprise system requirements](https://technet.microsoft.com/en-us/windows/dn798752.aspx)
[Windows 10 Specifications](https://www.microsoft.com/en-us/windows/Windows-10-specifications)
[Windows 10 IT pro forums](https://social.technet.microsoft.com/Forums/en-US/home?category=Windows10ITPro) diff --git a/windows/deploy/upgrade-readiness-architecture.md b/windows/deploy/upgrade-readiness-architecture.md index c4cafc8768..93a028f925 100644 --- a/windows/deploy/upgrade-readiness-architecture.md +++ b/windows/deploy/upgrade-readiness-architecture.md @@ -13,7 +13,7 @@ Microsoft analyzes system, application, and driver telemetry data to help you de --> -![Upgrade Readiness architecture](images/upgrade-analytics-architecture.png) +![Upgrade Readiness architecture](images/ur-arch-diagram.png) After you enable Windows telemetry on user computers and install the compatibility update KB (1), user computers send computer, application and driver telemetry data to a secure Microsoft data center through the Microsoft Data Management Service (2). After you configure Upgrade Readiness, telemetry data is analyzed by the Upgrade Readiness Service (3) and pushed to your OMS workspace (4). You can then use the Upgrade Readiness solution (5) to plan and manage Windows upgrades. diff --git a/windows/keep-secure/TOC.md b/windows/keep-secure/TOC.md index d30d881ccb..b3dc0db5dd 100644 --- a/windows/keep-secure/TOC.md +++ b/windows/keep-secure/TOC.md @@ -789,7 +789,7 @@ ###### [Misconfigured machines](fix-unhealhty-sensors-windows-defender-advanced-threat-protection.md#misconfigured-machines) #### [Configure Windows Defender ATP preferences settings](preferences-setup-windows-defender-advanced-threat-protection.md) ##### [Update general settings](general-settings-windows-defender-advanced-threat-protection.md) -##### [Turn on advanced features](advanced-features-windows-defender-advacned-threat-protection.md) +##### [Turn on advanced features](advanced-features-windows-defender-advanced-threat-protection.md) ##### [Turn on preview experience](preview-settings-windows-defender-advanced-threat-protection.md) ##### [Configure email notifications](configure-email-notifications-windows-defender-advanced-threat-protection.md) #### [Windows Defender ATP settings](settings-windows-defender-advanced-threat-protection.md) diff --git a/windows/keep-secure/advanced-features-windows-defender-advacned-threat-protection.md b/windows/keep-secure/advanced-features-windows-defender-advanced-threat-protection.md similarity index 100% rename from windows/keep-secure/advanced-features-windows-defender-advacned-threat-protection.md rename to windows/keep-secure/advanced-features-windows-defender-advanced-threat-protection.md diff --git a/windows/keep-secure/api-portal-mapping-windows-defender-advanced-threat-protection.md b/windows/keep-secure/api-portal-mapping-windows-defender-advanced-threat-protection.md index e242add755..d551629b2e 100644 --- a/windows/keep-secure/api-portal-mapping-windows-defender-advanced-threat-protection.md +++ b/windows/keep-secure/api-portal-mapping-windows-defender-advanced-threat-protection.md @@ -71,3 +71,10 @@ Portal label | SIEM field name | Description ![Image of machine timeline with numbers](images/atp-remediated-alert.png) ![Image of file details](images/atp-file-details.png) + + +## Related topics +- [Enable SIEM integration in Windows Defender ATP](enable-siem-integration-windows-defender-advanced-threat-protection.md) +- [Configure Splunk](configure-splunk-windows-defender-advanced-threat-protection.md) +- [Configure ArcSight](configure-arcsight-windows-defender-advanced-threat-protection.md) +- [Pull Windows Defender ATP alerts using REST API](pull-alerts-using-rest-api-windows-defender-advanced-threat-protection.md) diff --git a/windows/keep-secure/configure-arcsight-windows-defender-advanced-threat-protection.md b/windows/keep-secure/configure-arcsight-windows-defender-advanced-threat-protection.md index fba8ebda15..21b8b172ec 100644 --- a/windows/keep-secure/configure-arcsight-windows-defender-advanced-threat-protection.md +++ b/windows/keep-secure/configure-arcsight-windows-defender-advanced-threat-protection.md @@ -68,8 +68,9 @@ The following steps assume that you have completed all the required steps in [Be - WDATP-connector.properties: C:\\*folder_location*\current\user\agent\flexagent\ - >[!NOTE] - >You must put the configuration files in this location, where *folder_location* represents the location where you installed the tool. + NOTE: + You must put the configuration files in this location, where *folder_location* represents the location where you installed the tool. + 4. After the installation of the core connector completes, the Connector Setup window opens. In the Connector Setup window, select **Add a Connector**. 5. Select Type: **ArcSight FlexConnector REST** and click **Next**. @@ -174,10 +175,11 @@ Windows Defender ATP alerts will appear as discrete events, with "Microsoft” a A browser window appears. Allow it to run, it should disappear, and the connector should now be running. - > [!NOTE] - > Verify that the connector is running by stopping the process again. Then start the connector again, and no browser window should appear. +> [!NOTE] +> Verify that the connector is running by stopping the process again. Then start the connector again, and no browser window should appear. ## Related topics -- [Configure security information and events management (SIEM) tools to pull alerts](configure-siem-windows-defender-advanced-threat-protection.md) - [Enable SIEM integration in Windows Defender ATP](enable-siem-integration-windows-defender-advanced-threat-protection.md) -- [Configure Splunk to pull alerts](configure-splunk-windows-defender-advanced-threat-protection.md) +- [Configure Splunk](configure-splunk-windows-defender-advanced-threat-protection.md) +- [Windows Defender ATP alert API fields](api-portal-mapping-windows-defender-advanced-threat-protection.md) +- [Pull Windows Defender ATP alerts using REST API](pull-alerts-using-rest-api-windows-defender-advanced-threat-protection.md) diff --git a/windows/keep-secure/configure-email-notifications-windows-defender-advanced-threat-protection.md b/windows/keep-secure/configure-email-notifications-windows-defender-advanced-threat-protection.md index 2ad2430c0e..c4a85d0274 100644 --- a/windows/keep-secure/configure-email-notifications-windows-defender-advanced-threat-protection.md +++ b/windows/keep-secure/configure-email-notifications-windows-defender-advanced-threat-protection.md @@ -64,5 +64,5 @@ This section lists various issues that you may encounter when using email notifi ## Related topics - [Update general settings in Windows Defender ATP](general-settings-windows-defender-advanced-threat-protection.md) -- [Turn on advanced features in Windows Defender ATP](advanced-features-windows-defender-advacned-threat-protection.md) +- [Turn on advanced features in Windows Defender ATP](advanced-features-windows-defender-advanced-threat-protection.md) - [Turn on the preview experience in Windows Defender ATP](preview-settings-windows-defender-advanced-threat-protection.md) diff --git a/windows/keep-secure/configure-splunk-windows-defender-advanced-threat-protection.md b/windows/keep-secure/configure-splunk-windows-defender-advanced-threat-protection.md index 18fa8ef5d5..f40c7d579d 100644 --- a/windows/keep-secure/configure-splunk-windows-defender-advanced-threat-protection.md +++ b/windows/keep-secure/configure-splunk-windows-defender-advanced-threat-protection.md @@ -42,14 +42,16 @@ You'll need to configure Splunk so that it can pull Windows Defender ATP alerts. 2. Click **Search & Reporting**, then **Settings** > **Data inputs**. 3. Click **REST** under **Local inputs**. -> [!NOTE] -> This input will only appear after you install the [REST API Modular Input app](https://splunkbase.splunk.com/app/1546/). + + NOTE: + This input will only appear after you install the [REST API Modular Input app](https://splunkbase.splunk.com/app/1546/). 4. Click **New**. 5. Type the following values in the required fields, then click **Save**: -> [!NOTE] ->All other values in the form are optional and can be left blank. + + NOTE: + All other values in the form are optional and can be left blank. @@ -132,6 +134,7 @@ Use the solution explorer to view alerts in Splunk. ## Related topics -- [Configure security information and events management (SIEM) tools to pull alerts](configure-siem-windows-defender-advanced-threat-protection.md) - [Enable SIEM integration in Windows Defender ATP](enable-siem-integration-windows-defender-advanced-threat-protection.md) -- [Configure HP ArcSight to pull alerts](configure-arcsight-windows-defender-advanced-threat-protection.md) +- [Configure ArcSight](configure-arcsight-windows-defender-advanced-threat-protection.md) +- [Windows Defender ATP alert API fields](api-portal-mapping-windows-defender-advanced-threat-protection.md) +- [Pull Windows Defender ATP alerts using REST API](pull-alerts-using-rest-api-windows-defender-advanced-threat-protection.md) diff --git a/windows/keep-secure/dashboard-windows-defender-advanced-threat-protection.md b/windows/keep-secure/dashboard-windows-defender-advanced-threat-protection.md index c2c75d2d52..4aba77f8b3 100644 --- a/windows/keep-secure/dashboard-windows-defender-advanced-threat-protection.md +++ b/windows/keep-secure/dashboard-windows-defender-advanced-threat-protection.md @@ -55,14 +55,14 @@ This tile shows you a list of machines with the highest number of active alerts. Click the name of the machine to see details about that machine. For more information see, [Investigate machines in the Windows Defender Advanced Threat Protection Machines view](investigate-machines-windows-defender-advanced-threat-protection.md). -You can also click **Machines view** at the top of the tile to go directly to the **Machines view**, sorted by the number of active alerts. For more information see, [Investigate machines in the Windows Defender Advanced Threat Protection Machines view](investigate-machines-windows-defender-advanced-threat-protection.md). +You can also click **Machines list** at the top of the tile to go directly to the **Machines view**, sorted by the number of active alerts. For more information see, [Investigate machines in the Windows Defender Advanced Threat Protection Machines view](investigate-machines-windows-defender-advanced-threat-protection.md). ## Users at risk The tile shows you a list of user accounts with the most active alerts. The total number of alerts for each user is shown in a circle next to the user account, and then further categorized by severity levels at the far end of the tile (hover over each severity bar to see its label). ![User accounts at risk tile shows a list of user accounts with the highest number of alerts and a breakdown of the severity of the alerts](images/atp-users-at-risk.png) -Click the user account to see details about the user account. For more information see [Investigate a user entity in Windows Defender Advanced Threat Protection] +Click the user account to see details about the user account. For more information see [Investigate a user account](investigate-user-windows-defender-advanced-threat-protection.md). ## Machines with active malware detections The **Machines with active malware detections** tile will only appear if your endpoints are using Windows Defender. @@ -97,7 +97,7 @@ There are two status indicators that provide information on the number of machin - **Inactive** - Machines that have stopped reporting to the Windows Defender ATP service for more than seven days in the past month. - **Misconfigured** – These machines might partially be reporting telemetry to the Windows Defender ATP service and might have configuration errors that need to be corrected. -When you click any of the groups, you’ll be directed to machines view, filtered according to your choice. For more information, see [Check sensor health state](check-sensor-status-windows-defender-advanced-threat-protection.md) and [Investigate machines](investigate-machines-windows-defender-advanced-threat-protection.md). +When you click any of the groups, you’ll be directed to machines list, filtered according to your choice. For more information, see [Check sensor health state](check-sensor-status-windows-defender-advanced-threat-protection.md) and [Investigate machines](investigate-machines-windows-defender-advanced-threat-protection.md). ## Service health The **Service health** tile informs you if the service is active or if there are issues. diff --git a/windows/keep-secure/enable-custom-ti-windows-defender-advanced-threat-protection.md b/windows/keep-secure/enable-custom-ti-windows-defender-advanced-threat-protection.md index 47189ede43..e83fa5ae63 100644 --- a/windows/keep-secure/enable-custom-ti-windows-defender-advanced-threat-protection.md +++ b/windows/keep-secure/enable-custom-ti-windows-defender-advanced-threat-protection.md @@ -31,9 +31,9 @@ Before you can create custom threat intelligence (TI) using REST API, you'll nee 3. Copy the individual values or select **Save details to file** to download a file that contains all the values. - >[!WARNING] - >The client secret is only displayed once. Make sure you keep a copy of it in a safe place. - >For more information about getting a new secret see, [Learn how to get a new secret](troubleshoot-custom-ti-windows-defender-advanced-threat-protection.md#learn-how-to-get-a-new-client-secret). + WARNING:
+ The client secret is only displayed once. Make sure you keep a copy of it in a safe place.
+ For more information about getting a new secret see, [Learn how to get a new secret](troubleshoot-custom-ti-windows-defender-advanced-threat-protection.md#learn-how-to-get-a-new-client-secret). 4. Select **Generate tokens** to get an access and refresh token. diff --git a/windows/keep-secure/enable-siem-integration-windows-defender-advanced-threat-protection.md b/windows/keep-secure/enable-siem-integration-windows-defender-advanced-threat-protection.md index 5746ab6157..a645f8ccad 100644 --- a/windows/keep-secure/enable-siem-integration-windows-defender-advanced-threat-protection.md +++ b/windows/keep-secure/enable-siem-integration-windows-defender-advanced-threat-protection.md @@ -29,16 +29,18 @@ Enable security information and event management (SIEM) integration so you can p 2. Select **Enable SIEM integration**. This activates the **SIEM connector access details** section with pre-populated values and an application is created under you Azure Active Directory (AAD) tenant. - >[!WARNING] - >The client secret is only displayed once. Make sure you keep a copy of it in a safe place. - >For more information about getting a new secret see, [Learn how to get a new secret](troubleshoot-custom-ti-windows-defender-advanced-threat-protection.md#learn-how-to-get-a-new-client-secret). + WARNING:
+ The client secret is only displayed once. Make sure you keep a copy of it in a safe place.
+ For more information about getting a new secret see, [Learn how to get a new secret](troubleshoot-custom-ti-windows-defender-advanced-threat-protection.md#learn-how-to-get-a-new-client-secret). 3. Choose the SIEM type you use in your organization. - >[!NOTE] - >If you select HP ArcSight, you'll need to save these two configuration files: - > - WDATP-connector.jsonparser.properties - > - WDATP-connector.properties - > If you want to connect directly to the alerts REST API through programmatic access, choose **Generic API**. + + NOTE:
+ If you select HP ArcSight, you'll need to save these two configuration files:
+ - WDATP-connector.jsonparser.properties + - WDATP-connector.properties
+ + If you want to connect directly to the alerts REST API through programmatic access, choose **Generic API**. 4. Copy the individual values or select **Save details to file** to download a file that contains all the values. @@ -47,5 +49,7 @@ Enable security information and event management (SIEM) integration so you can p You can now proceed with configuring your SIEM solution or connecting to the alerts REST API through programmatic access. You'll need to use the tokens when configuring your SIEM solution to allow it to receive alerts from the Windows Defender ATP portal. ## Related topics -- [Configure Splunk to pull Windows Defender ATP alerts](configure-splunk-windows-defender-advanced-threat-protection.md) -- [Configure HP ArcSight to pull Windows Defender ATP alerts](configure-arcsight-windows-defender-advanced-threat-protection.md) +- [Configure Splunk](configure-splunk-windows-defender-advanced-threat-protection.md) +- [Configure ArcSight](configure-arcsight-windows-defender-advanced-threat-protection.md) +- [Windows Defender ATP alert API fields](api-portal-mapping-windows-defender-advanced-threat-protection.md) +- [Pull Windows Defender ATP alerts using REST API](pull-alerts-using-rest-api-windows-defender-advanced-threat-protection.md) diff --git a/windows/keep-secure/event-error-codes-windows-defender-advanced-threat-protection.md b/windows/keep-secure/event-error-codes-windows-defender-advanced-threat-protection.md index 2c68fb6704..e69c2a864d 100644 --- a/windows/keep-secure/event-error-codes-windows-defender-advanced-threat-protection.md +++ b/windows/keep-secure/event-error-codes-windows-defender-advanced-threat-protection.md @@ -25,7 +25,7 @@ localizationpriority: high You can review event IDs in the [Event Viewer](https://msdn.microsoft.com/library/aa745633(v=bts.10).aspx) on individual endpoints. -For example, if endpoints are not appearing in the **Machines view** list, you might need to look for event IDs on the endpoints. You can then use this table to determine further troubleshooting steps. +For example, if endpoints are not appearing in the **Machines list** list, you might need to look for event IDs on the endpoints. You can then use this table to determine further troubleshooting steps. > [!NOTE] > It can take several days for endpoints to begin reporting to the Windows Defender ATP service. diff --git a/windows/keep-secure/fix-unhealhty-sensors-windows-defender-advanced-threat-protection.md b/windows/keep-secure/fix-unhealhty-sensors-windows-defender-advanced-threat-protection.md index 01eaa034f6..225527fdbc 100644 --- a/windows/keep-secure/fix-unhealhty-sensors-windows-defender-advanced-threat-protection.md +++ b/windows/keep-secure/fix-unhealhty-sensors-windows-defender-advanced-threat-protection.md @@ -36,7 +36,7 @@ If the machine has not been in use for more than 7 days for any reason, it will A reinstalled or renamed machine will generate a new machine entity in Windows Defender ATP portal. The previous machine entity will remain with an ‘Inactive’ status in the portal. If you reinstalled a machine and deployed the Windows Defender ATP package, search for the new machine name to verify that the machine is reporting normally. **Machine was offboarded**
-If the machine was offboarded it will still appear in machines view. After 7 days, the machine health state should change to inactive. +If the machine was offboarded it will still appear in machines list. After 7 days, the machine health state should change to inactive. Do you expect a machine to be in ‘Active’ status? [Open a CSS ticket](https://support.microsoft.com/en-us/getsupport?wf=0&tenant=ClassicCommercial&oaspworkflow=start_1.0.0.0&locale=en-us&supportregion=en-us&pesid=16055&ccsid=636206786382823561). diff --git a/windows/keep-secure/general-settings-windows-defender-advanced-threat-protection.md b/windows/keep-secure/general-settings-windows-defender-advanced-threat-protection.md index b8021ab337..d53c76fc27 100644 --- a/windows/keep-secure/general-settings-windows-defender-advanced-threat-protection.md +++ b/windows/keep-secure/general-settings-windows-defender-advanced-threat-protection.md @@ -23,14 +23,16 @@ localizationpriority: high During the onboarding process, a wizard takes you through the general settings of Windows Defender ATP. After onboarding, you might want to update some settings which you'll be able to do through the **Preferences setup** menu. 1. In the navigation pane, select **Preferences setup** > **General**. + 2. Modify settings such as data retention policy or the industry that best describes your organization. - >[!NOTE] - >Other settings are not editable. + > [!NOTE] + > Other settings are not editable. + 3. Click **Save preferences**. ## Related topics -- [Turn on advanced features in Windows Defender ATP](advanced-features-windows-defender-advacned-threat-protection.md) +- [Turn on advanced features in Windows Defender ATP](advanced-features-windows-defender-advanced-threat-protection.md) - [Turn on the preview experience in Windows Defender ATP ](preview-settings-windows-defender-advanced-threat-protection.md) - [Configure email notifications in Windows Defender ATP](configure-email-notifications-windows-defender-advanced-threat-protection.md) diff --git a/windows/keep-secure/images/atp-machines-at-risk.png b/windows/keep-secure/images/atp-machines-at-risk.png index e733606c0c..219e958d7d 100644 Binary files a/windows/keep-secure/images/atp-machines-at-risk.png and b/windows/keep-secure/images/atp-machines-at-risk.png differ diff --git a/windows/keep-secure/images/rules-legend.png b/windows/keep-secure/images/rules-legend.png index dea7d1dc70..a48783c6e3 100644 Binary files a/windows/keep-secure/images/rules-legend.png and b/windows/keep-secure/images/rules-legend.png differ diff --git a/windows/keep-secure/machines-view-overview-windows-defender-advanced-threat-protection.md b/windows/keep-secure/machines-view-overview-windows-defender-advanced-threat-protection.md index 76dd0c900d..73f0e86007 100644 --- a/windows/keep-secure/machines-view-overview-windows-defender-advanced-threat-protection.md +++ b/windows/keep-secure/machines-view-overview-windows-defender-advanced-threat-protection.md @@ -1,6 +1,6 @@ --- -title: View and organize the Windows Defender ATP machines view -description: Learn about the available features that you can use from the Machines view such as sorting, filtering, and exporting the machine list which can enhance investigations. +title: View and organize the Windows Defender ATP machines list +description: Learn about the available features that you can use from the Machines list such as sorting, filtering, and exporting the machine list which can enhance investigations. keywords: sort, filter, export, csv, machine name, domain, last seen, internal IP, health state, active alerts, active malware detections, threat category, review alerts, network, connection, malware, type, password stealer, ransomware, exploit, threat, general malware, unwanted software search.product: eADQiWindows 10XVcnh ms.prod: w10 @@ -11,7 +11,7 @@ author: mjcaparas localizationpriority: high --- -# View and organize the Windows Defender ATP Machines view +# View and organize the Windows Defender ATP Machines list **Applies to:** @@ -21,23 +21,23 @@ localizationpriority: high - Windows 10 Pro Education - Windows Defender Advanced Threat Protection (Windows Defender ATP) -The **Machines view** shows a list of the machines in your network, the domain of each machine, when it last reported and the local IP Address it reported on, its **Health state**, the number of active alerts on each machine categorized by alert severity level, and the number of active malware detections. This view allows viewing machines ranked by risk or sensor health state, and keeping track of all machines that are reporting sensor data in your network. +The **Machines list** shows a list of the machines in your network, the domain of each machine, when it last reported and the local IP Address it reported on, its **Health state**, the number of active alerts on each machine categorized by alert severity level, and the number of active malware detections. This view allows viewing machines ranked by risk or sensor health state, and keeping track of all machines that are reporting sensor data in your network. Use the Machines view in these main scenarios: - **During onboarding**
- During the onboarding process, the **Machines view** is gradually populated with endpoints as they begin to report sensor data. Use this view to track your onboarded endpoints as they come online. Sort and filter by time of last report, **Active malware category**, or **Sensor health state**, or download the complete endpoint list as a CSV file for offline analysis. + During the onboarding process, the **Machines list** is gradually populated with endpoints as they begin to report sensor data. Use this view to track your onboarded endpoints as they come online. Sort and filter by time of last report, **Active malware category**, or **Sensor health state**, or download the complete endpoint list as a CSV file for offline analysis. - **Day-to-day work** - The **Machines view** enables easy identification of machines most at risk in a glance. High-risk machines have the greatest number and highest-severity alerts; **Sensor health state** provides another dimension to rank machines. Sorting machines by **Active alerts**, and then by **Sensor health state** helps identify the most vulnerable machines and take action on them. + The **Machines list** enables easy identification of machines most at risk in a glance. High-risk machines have the greatest number and highest-severity alerts; **Sensor health state** provides another dimension to rank machines. Sorting machines by **Active alerts**, and then by **Sensor health state** helps identify the most vulnerable machines and take action on them. ## Sort, filter, and download the list of machines from the Machines view -You can sort the **Machines view** by clicking on any column header to sort the view in ascending or descending order. +You can sort the **Machines list** by clicking on any column header to sort the view in ascending or descending order. -Filter the **Machines view** by time period, **Active malware categories**, or **Sensor health state** to focus on certain sets of machines, according to the desired criteria. +Filter the **Machines list** by time period, **Active malware categories**, or **Sensor health state** to focus on certain sets of machines, according to the desired criteria. You can also download the entire list in CSV format using the **Export to CSV** feature. -![Image of machines view with list of machines](images/atp-machines-view-list.png) +![Image of machines list with list of machines](images/atp-machines-view-list.png) You can use the following filters to limit the list of machines displayed during an investigation: @@ -71,7 +71,7 @@ You can download a full list of all the machines in your organization, in CSV f Exporting the list in CSV format displays the data in an unfiltered manner. The CSV file will include all machines in the organization, regardless of any filtering applied in the view itself. ## Sort the Machines view -You can sort the **Machines view** by the following columns: +You can sort the **Machines list** by the following columns: - **Machine name** - Name or GUID of the machine - **Last seen** - Date and time when the machine last reported sensor data diff --git a/windows/keep-secure/overview-of-threat-mitigations-in-windows-10.md b/windows/keep-secure/overview-of-threat-mitigations-in-windows-10.md index 0b8d3f4996..2e7af88cf4 100644 --- a/windows/keep-secure/overview-of-threat-mitigations-in-windows-10.md +++ b/windows/keep-secure/overview-of-threat-mitigations-in-windows-10.md @@ -1,4 +1,15 @@ -# Mitigate threats by using Windows 10 security features +--- +title: Mitigate threats by using Windows 10 security features (Windows 10) +description: This topic provides an overview of software and firmware threats faced in the current security landscape, and the mitigations that Windows 10 offers in response to these threats. +ms.prod: w10 +ms.mktglfcycl: deploy +ms.sitesec: library +ms.pagetype: security +localizationpriority: high +author: justinha +--- + +# Mitigate threats by using Windows 10 security features **Applies to:** - Windows 10 @@ -44,7 +55,7 @@ Windows 10 mitigations that you can configure are listed in the following two ta |---|---| | **Windows Defender SmartScreen**,
which helps prevent
malicious applications
from being downloaded | Windows Defender SmartScreen can check the reputation of a downloaded application by using a service that Microsoft maintains. The first time a user runs an app that originates from the Internet (even if the user copied it from another PC), SmartScreen checks to see if the app lacks a reputation or is known to be malicious, and responds accordingly.

**More information**: [Windows Defender SmartScreen](#windows-defender-smartscreen), later in this topic | | **Credential Guard**,
which helps keep attackers
from gaining access through
Pass-the-Hash or
Pass-the-Ticket attacks | Credential Guard uses virtualization-based security to isolate secrets, such as NTLM password hashes and Kerberos Ticket Granting Tickets, so that only privileged system software can access them.
Credential Guard is included in Windows 10 Enterprise and Windows Server 2016.

**More information**: [Protect derived domain credentials with Credential Guard](credential-guard.md) | -| **Enterprise certificate pinning**,
which helps keep users
from being deceived by
man-in-the-middle attacks
that leverage PKI | With enterprise certificate pinning, you can “pin” (associate) an X.509 certificate and its public key to its legitimate Certification Authority, either root or leaf. This helps protect your enterprise’s intranet sites (not external Internet sites) by providing validation for digitally signed certificates (SSL certificates) used while browsing. This feature mitigates man-in the-middle attacks that involve these certificates.

**More information**: ENTERPRISE_CERTIFICATE_PINNING_LINK | +| **Enterprise certificate pinning**,
which helps keep users
from being deceived by
man-in-the-middle attacks
that leverage PKI | Enterprise certificate pinning enables you to protect your internal domain names from chaining to unwanted certificates or to fraudulently issued certificates. With enterprise certificate pinning, you can “pin” (associate) an X.509 certificate and its public key to its legitimate Certification Authority, either root or leaf.

**More information**: [Enterprise Certificate Pinning](enterprise-certificate-pinning.md) | | **Device Guard**,
which helps keep a device
from running malware or
other untrusted apps | Device Guard includes Code Integrity policies, a whitelist you create of trusted apps—the only apps allowed to run in your organization. Device Guard also includes a powerful system mitigation called hypervisor-protected code integrity (HVCI), which leverages virtualization-based security (VBS) to protect Windows’ kernel-mode code integrity validation process. HVCI has specific hardware requirements, and works with Code Integrity policies to help stop attacks even if they gain entrance to the kernel.
Device Guard is included in Windows 10 Enterprise and Windows Server 2016.

**More information**: [Introduction to Device Guard](introduction-to-device-guard-virtualization-based-security-and-code-integrity-policies.md) | | **Windows Defender Antivirus**,
which helps keep devices
free of viruses and other
known software threats | Windows 10 includes Windows Defender Antivirus, a robust inbox antimalware solution. Windows Defender Antivirus has been significantly improved since it was introduced in Windows 8.

**More information**: [Windows Defender Antivirus](#windows-defender-antivirus), later in this topic | | **Blocking of untrusted fonts**,
which helps prevent fonts
from being used in
elevation-of-privilege attacks | The Block Untrusted Fonts setting allows you to prevent users from loading untrusted fonts onto your network, which can mitigate elevation-of-privilege attacks associated with the parsing of font files. However, as of Windows 10, version 1703, this mitigation is less important, because font parsing is isolated in an [AppContainer sandbox](https://msdn.microsoft.com/library/windows/desktop/mt595898(v=vs.85).aspx) (for a list describing this and other kernel pool protections, see [Kernel pool protections](#kernel-pool-protections), later in this topic).

**More information**: [Block untrusted fonts in an enterprise](block-untrusted-fonts-in-enterprise.md) | @@ -73,9 +84,7 @@ Starting with Windows Internet Explorer 8, the SmartScreen Filter has helped pro For Windows 10, Microsoft further developed SmartScreen, now called Windows Defender SmartScreen, by integrating its app reputation abilities into the operating system itself, which allows SmartScreen to check the reputation of files downloaded from the Internet and warn users when they’re about to run a high-risk downloaded file. The first time a user runs an app that originates from the Internet, SmartScreen checks the reputation of the application by using digital signatures and other factors against a service that Microsoft maintains. If the app lacks a reputation or is known to be malicious, SmartScreen warns the user or blocks execution entirely, depending on how the administrator has configured Microsoft Intune or Group Policy settings. - - -For more information, see Windows Defender SmartScreen overview. +For more information, see [Windows Defender SmartScreen overview](windows-defender-smartscreen-overview.md). ### Windows Defender Antivirus @@ -202,7 +211,7 @@ With Protected Processes, Windows 10 prevents untrusted processes from interacti ### Universal Windows apps protections -When users download Universal Windows apps or even Windows Classic applications (Win32) from the Windows Store, it’s highly unlikely that they will encounter malware, because all apps go through a careful screening process before being made available in the store. Apps that organizations build and distribute through sideloading processes will need to be reviewed internally to ensure that they meet organizational security requirements. +When users download Universal Windows apps or even Windows Classic applications (Win32) from the Windows Store, it’s unlikely that they will encounter malware because all apps go through a careful screening process before being made available in the store. Apps that organizations build and distribute through sideloading processes will need to be reviewed internally to ensure that they meet organizational security requirements. Regardless of how users acquire Universal Windows apps, they can use them with increased confidence. Unlike Windows Classic applications, which can run with elevated privileges and have potentially sweeping access to the system and data, Universal Windows apps run in an AppContainer sandbox with limited privileges and capabilities. For example, Universal Windows apps have no system-level access, have tightly controlled interactions with other apps, and have no access to data unless the user explicitly grants the application permission. @@ -366,7 +375,7 @@ The Converter feature is currently available as a Windows PowerShell cmdlet, **S - **Converting Attack Surface Reduction (ASR) settings to a Code Integrity policy file**: If the input file contains any settings for EMET’s Attack Surface Reduction (ASR) mitigation, the converter will also create a Code Integrity policy file. In this case, you can complete the merging, auditing, and deployment process for the Code Integrity policy, as described in [Deploy Device Guard: deploy code integrity policies](deploy-device-guard-deploy-code-integrity-policies.md). This will enable protections on Windows 10 equivalent to EMET’s ASR protections. -- **Converting Certificate Trust settings to enterprise certificate pinning rules**: If you have an EMET “Certificate Trust” XML file (pinning rules file), you can also use **Set-ProcessMitigations -Convert** to convert the pinning rules file into an enterprise certificate pinning rules file. Then you can finish enabling that file as described in the Enterprise_certificate_pinning_documentation. +- **Converting Certificate Trust settings to enterprise certificate pinning rules**: If you have an EMET “Certificate Trust” XML file (pinning rules file), you can also use **Set-ProcessMitigations -Convert** to convert the pinning rules file into an enterprise certificate pinning rules file. Then you can finish enabling that file as described in [Enterprise Certificate Pinning](enterprise-certificate-pinning.md). #### EMET-related products diff --git a/windows/keep-secure/portal-overview-windows-defender-advanced-threat-protection.md b/windows/keep-secure/portal-overview-windows-defender-advanced-threat-protection.md index ac785c854a..c6d0f9dd37 100644 --- a/windows/keep-secure/portal-overview-windows-defender-advanced-threat-protection.md +++ b/windows/keep-secure/portal-overview-windows-defender-advanced-threat-protection.md @@ -1,7 +1,7 @@ --- title: Windows Defender Advanced Threat Protection portal overview description: Use the Windows Defender ATP portal to monitor your enterprise network and assist in responding to alerts to potential advanced persistent threat (APT) activity or data breaches. -keywords: Windows Defender ATP portal, portal, cybersecurity threat intelligence, dashboard, alerts queue, machines view, preferences setup, endpoint management, advanced attacks +keywords: Windows Defender ATP portal, portal, cybersecurity threat intelligence, dashboard, alerts queue, machines list, preferences setup, endpoint management, advanced attacks search.product: eADQiWindows 10XVcnh ms.prod: w10 ms.mktglfcycl: deploy diff --git a/windows/keep-secure/preferences-setup-windows-defender-advanced-threat-protection.md b/windows/keep-secure/preferences-setup-windows-defender-advanced-threat-protection.md index 5d51de963a..1523930b5c 100644 --- a/windows/keep-secure/preferences-setup-windows-defender-advanced-threat-protection.md +++ b/windows/keep-secure/preferences-setup-windows-defender-advanced-threat-protection.md @@ -27,6 +27,6 @@ Use the **Preferences setup** menu to modify general settings, advanced features Topic | Description :---|:--- [Update general settings](general-settings-windows-defender-advanced-threat-protection.md) | Modify your general settings that were previously defined as part of the onboarding process. -[Enable advanced features](advanced-features-windows-defender-advacned-threat-protection.md)| Enable features such as **Block file** and other features that require integration with other products. +[Enable advanced features](advanced-features-windows-defender-advanced-threat-protection.md)| Enable features such as **Block file** and other features that require integration with other products. [Enable the preview experience](preview-settings-windows-defender-advanced-threat-protection.md) | Allows you to turn on preview features so you can try upcoming features. [Configure email notifications](configure-email-notifications-windows-defender-advanced-threat-protection.md) | Enables you to configure and identify a group of individuals who will immediately be informed of new alerts through email notifications. diff --git a/windows/keep-secure/preview-settings-windows-defender-advanced-threat-protection.md b/windows/keep-secure/preview-settings-windows-defender-advanced-threat-protection.md index 9304e0ab7e..f1e4b41964 100644 --- a/windows/keep-secure/preview-settings-windows-defender-advanced-threat-protection.md +++ b/windows/keep-secure/preview-settings-windows-defender-advanced-threat-protection.md @@ -27,5 +27,5 @@ Turn on the preview experience setting to be among the first to try upcoming fea ## Related topics - [Update general settings in Windows Defender ATP](general-settings-windows-defender-advanced-threat-protection.md) -- [Turn on advanced features in Windows Defender ATP](advanced-features-windows-defender-advacned-threat-protection.md) +- [Turn on advanced features in Windows Defender ATP](advanced-features-windows-defender-advanced-threat-protection.md) - [Configure email notifications in Windows Defender ATP](configure-email-notifications-windows-defender-advanced-threat-protection.md) diff --git a/windows/keep-secure/pull-alerts-using-rest-api-windows-defender-advanced-threat-protection.md b/windows/keep-secure/pull-alerts-using-rest-api-windows-defender-advanced-threat-protection.md index af7b7f12d0..670143cd10 100644 --- a/windows/keep-secure/pull-alerts-using-rest-api-windows-defender-advanced-threat-protection.md +++ b/windows/keep-secure/pull-alerts-using-rest-api-windows-defender-advanced-threat-protection.md @@ -187,3 +187,9 @@ HTTP error code | Description 401 | Malformed request or invalid token. 403 | Unauthorized exception - any of the domains is not managed by the tenant administrator or tenant state is deleted. 500 | Error in the service. + +## Related topics +- [Enable SIEM integration in Windows Defender ATP](enable-siem-integration-windows-defender-advanced-threat-protection.md) +- [Configure Splunk](configure-splunk-windows-defender-advanced-threat-protection.md) +- [Configure ArcSight](configure-arcsight-windows-defender-advanced-threat-protection.md) +- [Windows Defender ATP alert API fields](api-portal-mapping-windows-defender-advanced-threat-protection.md) diff --git a/windows/keep-secure/respond-file-alerts-windows-defender-advanced-threat-protection.md b/windows/keep-secure/respond-file-alerts-windows-defender-advanced-threat-protection.md index 0d15caf8a1..26459e371e 100644 --- a/windows/keep-secure/respond-file-alerts-windows-defender-advanced-threat-protection.md +++ b/windows/keep-secure/respond-file-alerts-windows-defender-advanced-threat-protection.md @@ -130,7 +130,7 @@ For prevalent files in the organization, a warning is shown before an action is 1. Select the file you want to remove from the blocked list. You can select a file from any of the following views or use the Search box: – **Alerts** - Click the file links from the Description or Details in the Alert timeline - – **Machines view** - Click the file links in the Description or Details columns in the Observed on machine section + – **Machines list** - Click the file links in the Description or Details columns in the Observed on machine section – **Search box** - Select File from the drop–down menu and enter the file name 2. Open the **Actions** menu and select **Remove file from blocked list**. @@ -175,7 +175,7 @@ When the sample is collected, Windows Defender ATP runs the file in is a secure 1. Select the file that you want to submit for deep analysis. You can select or search a file from any of the following views: – Alerts - click the file links from the **Description** or **Details** in the Alert timeline - – **Machines View** - click the file links from the **Description** or **Details** in the **Machine in organization** section + – **Machines list** - click the file links from the **Description** or **Details** in the **Machine in organization** section – Search box - select **File** from the drop–down menu and enter the file name 2. In the **Deep analysis** section of the file view, click **Submit**. diff --git a/windows/keep-secure/respond-machine-alerts-windows-defender-advanced-threat-protection.md b/windows/keep-secure/respond-machine-alerts-windows-defender-advanced-threat-protection.md index 7262eeac48..3918964ff2 100644 --- a/windows/keep-secure/respond-machine-alerts-windows-defender-advanced-threat-protection.md +++ b/windows/keep-secure/respond-machine-alerts-windows-defender-advanced-threat-protection.md @@ -40,7 +40,7 @@ This machine isolation feature disconnects the compromised machine from the netw - **Dashboard** - Select the machine name from the Top machines with active alerts section. - **Alerts queue** - Select the machine name beside the machine icon from the alerts queue. - - **Machines view** - Select the machine name from the list of machines. + - **Machines list** - Select the machine name from the list of machines. - **Search box** - Select Machine from the drop-down menu and enter the machine name. 2. Open the **Actions** menu and select **Isolate machine**. @@ -102,7 +102,7 @@ CollectionSummaryReport.xls | This file is a summary of the investigation packag - **Dashboard** - Select the machine name from the Top machines with active alerts section. - **Alerts queue** - Select the machine name beside the machine icon from the alerts queue. - - **Machines view** - Select the heading of the machine name from the machines view. + - **Machines list** - Select the heading of the machine name from the machines list. - **Search box** - Select Machine from the drop-down menu and enter the machine name. 2. Open the **Actions** menu and select **Collect investigation package**. diff --git a/windows/keep-secure/troubleshoot-onboarding-windows-defender-advanced-threat-protection.md b/windows/keep-secure/troubleshoot-onboarding-windows-defender-advanced-threat-protection.md index e95197be01..3a2b9f8868 100644 --- a/windows/keep-secure/troubleshoot-onboarding-windows-defender-advanced-threat-protection.md +++ b/windows/keep-secure/troubleshoot-onboarding-windows-defender-advanced-threat-protection.md @@ -45,7 +45,7 @@ Deployment with the above-mentioned versions of System Center Configuration Mana If the deployment fails, you can check the output of the script on the endpoints. For more information, see [Troubleshoot onboarding when deploying with a script on the endpoint](#troubleshoot-onboarding-when-deploying-with-a-script-on-the-endpoint). -If the onboarding completed successfully but the endpoints are not showing up in the **Machines view** after an hour, see [Troubleshoot onboarding issues on the endpoint](#troubleshoot-onboarding-issues-on-the-endpoint) for additional errors that might occur. +If the onboarding completed successfully but the endpoints are not showing up in the **Machines list** after an hour, see [Troubleshoot onboarding issues on the endpoint](#troubleshoot-onboarding-issues-on-the-endpoint) for additional errors that might occur. ## Troubleshoot onboarding when deploying with a script on the endpoint @@ -119,7 +119,7 @@ ID | Severity | Event description | Troubleshooting steps 1819 | Error | Windows Defender Advanced Threat Protection CSP: Failed to Set Node's Value. NodeId: (%1), TokenName: (%2), Result: (%3). | Download the [Cumulative Update for Windows 10, 1607](https://go.microsoft.com/fwlink/?linkid=829760). ## Troubleshoot onboarding issues on the endpoint -If the deployment tools used does not indicate an error in the onboarding process, but endpoints are still not appearing in the machines view an hour, go through the following verification topics to check if an error occurred with the Windows Defender ATP agent: +If the deployment tools used does not indicate an error in the onboarding process, but endpoints are still not appearing in the machines list in an hour, go through the following verification topics to check if an error occurred with the Windows Defender ATP agent: - [View agent onboarding errors in the endpoint event log](#view-agent-onboarding-errors-in-the-endpoint-event-log) - [Ensure the telemetry and diagnostics service is enabled](#ensure-the-telemetry-and-diagnostics-service-is-enabled) - [Ensure the service is set to start](#ensure-the-service-is-set-to-start) diff --git a/windows/keep-secure/use-windows-defender-advanced-threat-protection.md b/windows/keep-secure/use-windows-defender-advanced-threat-protection.md index 23bb45e5bf..e614c969ca 100644 --- a/windows/keep-secure/use-windows-defender-advanced-threat-protection.md +++ b/windows/keep-secure/use-windows-defender-advanced-threat-protection.md @@ -45,7 +45,7 @@ Topic | Description [Investigate an IP address](investigate-ip-windows-defender-advanced-threat-protection.md) | Examine possible communication between your machines and external Internet protocol (IP) addresses. [Investigate a domain](investigate-domain-windows-defender-advanced-threat-protection.md) | Investigate a domain to see if machines and servers in your enterprise network have been communicating with a known malicious domain. [View and organize the Machines view](machines-view-overview-windows-defender-advanced-threat-protection.md)| You can sort, filter, and exporting the machine list. -[Investigate machines](investigate-machines-windows-defender-advanced-threat-protection.md) | The **Machines view** shows a list of the machines in your network, the corresponding number of active alerts for each machine categorized by alert severity levels, as well as the number of threats. +[Investigate machines](investigate-machines-windows-defender-advanced-threat-protection.md) | The **Machines list** shows a list of the machines in your network, the corresponding number of active alerts for each machine categorized by alert severity levels, as well as the number of threats. [Investigate a user account](investigate-user-windows-defender-advanced-threat-protection.md)| Investigate user accounts with the most active alerts. [Manage alerts](manage-alerts-windows-defender-advanced-threat-protection.md) | The **Manage Alert** menu on every alert lets you change an alert's status, resolve it, suppress it, or contribute comments about the alert. [Take response actions](response-actions-windows-defender-advanced-threat-protection.md)| Take action on a machine or file to quickly respond to detected attacks. diff --git a/windows/manage/change-history-for-manage-and-update-windows-10.md b/windows/manage/change-history-for-manage-and-update-windows-10.md index 168d27d267..21c950edcb 100644 --- a/windows/manage/change-history-for-manage-and-update-windows-10.md +++ b/windows/manage/change-history-for-manage-and-update-windows-10.md @@ -97,7 +97,7 @@ The topics in this library have been updated for Windows 10, version 1607 (also - [Connect to remote Azure Active Directory-joined PC](connect-to-remote-aadj-pc.md) - [Configure Windows 10 taskbar](configure-windows-10-taskbar.md) -- [Set up a shared or guest PC with Windows 10](set-up-shared-or-guest-pc.md) +- [Set up a shared or guest PC with Windows 10](../configure/set-up-shared-or-guest-pc.md) - [Guidelines for choosing an app for assigned access (kiosk mode)](guidelines-for-assigned-access-app.md) - [Application Virtualization (App-V) for Windows 10](appv-for-windows.md) - [User Experience Virtualization (UE-V) for Windows 10](uev-for-windows.md) diff --git a/windows/manage/manage-windows-10-in-your-organization-modern-management.md b/windows/manage/manage-windows-10-in-your-organization-modern-management.md index f149335e36..ed2c748110 100644 --- a/windows/manage/manage-windows-10-in-your-organization-modern-management.md +++ b/windows/manage/manage-windows-10-in-your-organization-modern-management.md @@ -44,11 +44,10 @@ As indicated in the diagram, Microsoft continues to provide support for deep man With Windows 10, you can continue to use traditional OS deployment, but you can also “manage out of the box.” To transform new devices into fully-configured, fully-managed devices, you can: - - Avoid reimaging by using dynamic provisioning, enabled by a cloud-based device management services like [Microsoft Intune](https://docs.microsoft.com/intune/understand-explore/introduction-to-microsoft-intune). -- Create self-contained provisioning packages built with the [Windows Imaging and Configuration Designer (ICD)](https://msdn.microsoft.com/library/windows/hardware/dn916113(v=vs.85).aspx). +- Create self-contained provisioning packages built with the [Windows Configuration Designer](https://technet.microsoft.com/itpro/windows/deploy/provisioning-packages). - Use traditional imaging techniques such as deploying custom images using [System Center Configuration Manager](https://docs.microsoft.com/sccm/core/understand/introduction). diff --git a/windows/manage/set-up-shared-or-guest-pc.md b/windows/manage/set-up-shared-or-guest-pc.md deleted file mode 100644 index f641f80569..0000000000 --- a/windows/manage/set-up-shared-or-guest-pc.md +++ /dev/null @@ -1,302 +0,0 @@ ---- -title: Set up a shared or guest PC with Windows 10 (Windows 10) -description: Windows 10, version 1607, introduces *shared PC mode*, which optimizes Windows 10 for shared use scenarios. -keywords: ["shared pc mode"] -ms.prod: W10 -ms.mktglfcycl: manage -ms.sitesec: library -author: jdeckerMS -localizationpriority: high ---- - -# Set up a shared or guest PC with Windows 10 - - -**Applies to** - -- Windows 10 - -Windows 10, version 1607, introduces *shared PC mode*, which optimizes Windows 10 for shared use scenarios, such as touchdown spaces in an enterprise and temporary customer use in retail. You can apply shared PC mode to Windows 10 Pro, Pro Education, Education, and Enterprise. - -> [!NOTE] -> If you're interested in using Windows 10 for shared PCs in a school, see [Use Set up School PCs app](https://technet.microsoft.com/edu/windows/use-set-up-school-pcs-app) which provides a simple way to configure PCs with shared PC mode plus additional settings specific for education. - -##Shared PC mode concepts -A Windows 10 PC in shared PC mode is designed to be management- and maintenance-free with high reliability. In shared PC mode, only one user can be signed in at a time. When the PC is locked, the currently signed in user can always be signed out at the lock screen. Users who sign-in are signed in as standard users, not admin users. - -###Account models -It is intended that shared PCs are joined to an Active Directory or Azure Active Directory domain by a user with the necessary rights to perform a domain join as part of a setup process. This enables any user that is part of the directory to sign-in to the PC as a standard user. The user who originally joined the PC to the domain will have administrative rights when they sign in. If using Azure Active Directory Premium, any domain user can also be configured to sign in with administrative rights. Additionally, shared PC mode can be configured to enable a **Start without an account** option on the sign-in screen, which doesn't require any user credentials or authentication and creates a new local account. - -###Account management -When the account management service is turned on in shared PC mode, accounts are automatically deleted. Account deletion applies to Active Directory, Azure Active Directory, and local accounts that are created by the **Start without an account** option. Account management is performed both at sign-off time (to make sure there is enough disk space for the next user) as well as during system maintenance time periods. Shared PC mode can be configured to delete accounts immediately at sign-out or when disk space is low. - -###Maintenance and sleep -Shared PC mode is configured to take advantage of maintenance time periods which run while the PC is not in use. Therefore, sleep is strongly recommended so that the PC can wake up when it is not is use to perform maintenance, clean up accounts, and run Windows Update. The recommended settings can be set by choosing **SetPowerPolicies** in the list of shared PC options. Additionally, on devices without Advanced Configuration and Power Interface (ACPI) wake alarms, shared PC mode will always override real-time clock (RTC) wake alarms to be allowed to wake the PC from sleep (by default, RTC wake alarms are off). This ensures that the widest variety of hardware will take advantage of maintenance periods. - -While shared PC mode does not configure Windows Update itself, it is strongly recommended to configure Windows Update to automatically install updates and reboot (if necessary) during maintenance hours. This will help ensure the PC is always up to date and not interrupting users with updates. Use one of the following methods to configure Windows Update: - -- Group Policy: Set **Computer Configuration > Administrative Templates > Windows Components > Windows Update > Configure Automatic Updates** to `4` and check **Install during automatic maintenance**. -- MDM: Set **Update/AllowAutoUpdate** to `4`. -- Provisioning: In Windows Imaging and Configuration Designer (ICD), set **Policies/Update/AllowAutoUpdate** to `4`. - -[Learn more about the AllowAutoUpdate settings](https://msdn.microsoft.com/library/windows/hardware/dn904962.aspx#Update_AllowAutoUpdate) - -###App behavior - -Apps can take advantage of shared PC mode by changing their app behavior to align with temporary use scenarios. For example, an app might only download content on demand on a device in shared PC mode, or might skip first run experiences. For information on how an app can query for shared PC mode, see [SharedModeSettings class](https://msdn.microsoft.com/en-us/library/windows/apps/windows.system.profile.sharedmodesettings.aspx). - -###Customization -Shared PC mode exposes a set of customizations to tailor the behavior to your requirements. These customizations are the options that you'll set either using MDM or a provisioning package as explained in [Configuring shared PC mode on Windows](#configuring-shared-pc-mode-on-windows). The options are listed in the following table. - -| Setting | Value | -|:---|:---| -| EnableSharedPCMode | Set as **True**. If this is not set to **True**, shared PC mode is not turned on and none of the other settings apply. Some of the remaining settings in **SharedPC** are optional, but we strongly recommend that you also set `EnableAccountManager` to **True**. | -| AccountManagement: AccountModel | This option controls how users can sign-in on the PC. Choosing domain-joined will enable any user in the domain to sign-in. Specifying the guest option will add the **Start without an account** option to the sign-in screen and enable anonymous guest access to the PC.
- **Only guest** allows anyone to use the PC as a local standard (non-admin) account.
- **Domain-joined only** allows users to sign in with an Active Directory or Azure AD account.
- **Domain-joined and guest** allows users to sign in with an Active Directory, Azure AD, or local standard account. | -| AccountManagement: DeletionPolicy | - **Delete immediately** will delete the account on sign-out.
- **Delete at disk space threshold** will start deleting accounts when available disk space falls below the threshold you set for **DiskLevelDeletion**, and it will stop deleting accounts when the available disk space reaches the threshold you set for **DiskLevelCaching**. Accounts are deleted in order of oldest accessed to most recently accessed.

Example: The caching number is 50 and the deletion number is 25. Accounts will be cached while the free disk space is above 25%. When the free disk space is less than 25% (the deletion number) at a maintenance period, accounts will be deleted (oldest last used first) until the free disk space is above 50% (the caching number). Accounts will be deleted immediately at sign off of an account if free space is under the deletion threshold and disk space is very low, regardless if the PC is actively in use or not. | -| AccountManagement: DiskLevelCaching | If you set **DeletionPolicy** to **Delete at disk space threshold**, set the percent of total disk space to be used as the disk space threshold for account caching. | -| AccountManagement: DiskLevelDeletion | If you set **DeletionPolicy** to **Delete at disk space threshold**, set the percent of total disk space to be used as the disk space threshold for account deletion. | -| AccountManagement: EnableAccountManager | Set as **True** to enable automatic account management. If this is not set to true, no automatic account management will be done. | -| Customization: MaintenanceStartTime | By default, the maintenance start time (which is when automatic maintenance tasks run, such as Windows Update) is midnight. You can adjust the start time in this setting by entering a new start time in minutes from midnight. For example, if you want maintenance to begin at 2 AM, enter `120` as the value. | -| Customization: SetEduPolicies | Set to **True** for PCs that will be used in a school. When **SetEduPolicies** is **True**, the following additional settings are applied:
- Local storage locations are restricted. Users can only save files to the cloud.
- Custom Start and taskbar layouts are set.\*
- A custom sign-in screen background image is set.\*
- Additional educational policies are applied (see full list below).

\*Only applies to Windows 10 Pro Education, Enterprise, and Education | -| Customization: SetPowerPolicies | When set as **True**:
- Prevents users from changing power settings
- Turns off hibernate
- Overrides all power state transitions to sleep (e.g. lid close) | -| Customization: SignInOnResume | This setting specifies if the user is required to sign in with a password when the PC wakes from sleep. | -| Customization: SleepTimeout | Specifies all timeouts for when the PC should sleep. Enter the amount of idle time in seconds. If you don't set sleep timeout, the default of 1 hour applies. | - - -##Configuring shared PC mode on Windows -You can configure Windows to be in shared PC mode in a couple different ways: -- Mobile device management (MDM): Shared PC mode is enabled by the [SharedPC configuration service provider (CSP)](https://msdn.microsoft.com/library/windows/hardware/mt723294.aspx). Your MDM policy can contain any of the options listed in the [Customization](#customization) section. The following image shows a Microsoft Intune policy with the shared PC options added as OMA-URI settings. [Learn more about Windows 10 policy settings in Microsoft Intune.](https://docs.microsoft.com/intune/deploy-use/windows-10-policy-settings-in-microsoft-intune) - -![custom OMA-URI policy in Intune](images/oma-uri-shared-pc.png) - -- A provisioning package created with the Windows Imaging and Configuration Designer (ICD): You can apply a provisioning package when you initially set up the PC (also known as the out-of-box-experience or OOBE), or you can apply the provisioning package to a Windows 10 PC that is already in use. The provisioning package is created in Windows Imaging and Configuration Designer (ICD). Shared PC mode is enabled by the [SharedPC configuration service provider (CSP)](https://msdn.microsoft.com/library/windows/hardware/mt723294.aspx), exposed in ICD as SharedPC. - -![Shared PC settings in ICD](images/icd-adv-shared-pc.png) - - -### Create a provisioning package for shared use - -Use the Windows ICD tool included in the Windows Assessment and Deployment Kit (ADK) for Windows 10 to create a provisioning package that configures a device for shared PC mode. [Install the ADK and select **Configuration Designer**.](https://developer.microsoft.com/windows/hardware/windows-assessment-deployment-kit) - -1. Open Windows ICD (by default, %windir%\\Program Files (x86)\\Windows Kits\\10\\Assessment and Deployment Kit\\Imaging and Configuration Designer\\x86\\ICD.exe). - -2. On the **Start page**, select **Advanced provisioning**. - -3. Enter a name and (optionally) a description for the project, and click **Next**. - -4. Select **All Windows desktop editions**, and click **Next**. - -5. Click **Finish**. Your project opens in Windows ICD. - -6. Go to **Runtime settings** > **SharedPC**. [Select the desired settings for shared PC mode.](#customization) - -7. On the **File** menu, select **Save.** -8. On the **Export** menu, select **Provisioning package**. -9. Change **Owner** to **IT Admin**, which will set the precedence of this provisioning package higher than provisioning packages applied to this device from other sources, and then select **Next.** -10. Set a value for **Package Version**. - > [!TIP] - > You can make changes to existing packages and change the version number to update previously applied packages. -   -11. (*Optional*) In the **Provisioning package security** window, you can choose to encrypt the package and enable package signing. - - **Enable package encryption** - If you select this option, an auto-generated password will be shown on the screen. - - **Enable package signing** - If you select this option, you must select a valid certificate to use for signing the package. You can specify the certificate by clicking **Select...** and choosing the certificate you want to use to sign the package. - - > [!IMPORTANT]   - > We recommend that you include a trusted provisioning certificate in your provisioning package. When the package is applied to a device, the certificate is added to the system store and any package signed with that certificate thereafter can be applied silently. -   -12. Click **Next** to specify the output location where you want the provisioning package to go once it's built. By default, Windows ICD uses the project folder as the output location. - Optionally, you can click **Browse** to change the default output location. -13. Click **Next**. -14. Click **Build** to start building the package. The project information is displayed in the build page and the progress bar indicates the build status. - If you need to cancel the build, click **Cancel**. This cancels the current build process, closes the wizard, and takes you back to the **Customizations Page**. -15. If your build fails, an error message will show up that includes a link to the project folder. You can scan the logs to determine what caused the error. Once you fix the issue, try building the package again. - If your build is successful, the name of the provisioning package, output directory, and project directory will be shown. - - If you choose, you can build the provisioning package again and pick a different path for the output package. To do this, click **Back** to change the output package name and path, and then click **Next** to start another build. - - If you are done, click **Finish** to close the wizard and go back to the **Customizations Page**. -16. Select the **output location** link to go to the location of the package. You can provide that .ppkg to others through any of the following methods: - - - Shared network folder - - - SharePoint site - - - Removable media (USB/SD) (select this option to apply to a PC during initial setup) - - -### Apply the provisioning package - -You can apply the provisioning package to a PC during initial setup or to a PC that has already been set up. - -**During initial setup** -1. Start with a computer on the first-run setup screen. If the PC has gone past this screen, reset the PC to start over. To reset the PC, go to **Settings** > **Update & security** > **Recovery** > **Reset this PC**. - - ![The first screen to set up a new PC](images/oobe.jpg) - -2. Insert the USB drive and press the Windows key five times. Windows Setup will recognize the drive and ask if you want to set up the device. If there is only one provisioning package on the USB drive, you don't need to press the Windows key five times, Windows will automatically ask you if you want to set up the device. Select **Set up**. - - ![Set up device?](images/setupmsg.jpg) - -3. The next screen asks you to select a provisioning source. Select **Removable Media** and tap **Next**. - - ![Provision this device](images/prov.jpg) - -4. Select the provisioning package (\*.ppkg) that you want to apply, and tap **Next**. - - ![Choose a package](images/choose-package.png) - -5. Select **Yes, add it**. - - ![Do you trust this package?](images/trust-package.png) - -6. Read and accept the Microsoft Software License Terms. - - ![Sign in](images/license-terms.png) - -7. Select **Use Express settings**. - - ![Get going fast](images/express-settings.png) - -8. If the PC doesn't use a volume license, you'll see the **Who owns this PC?** screen. Select **My work or school owns it** and tap **Next**. - - ![Who owns this PC?](images/who-owns-pc.png) - -9. On the **Choose how you'll connect** screen, select **Join Azure AD** or **Join a domain** and tap **Next**. - - ![Connect to Azure AD](images/connect-aad.png) - -10. Sign in with your domain, Azure AD, or Office 365 account and password. When you see the progress ring, you can remove the USB drive. - - ![Sign in](images/sign-in-prov.png) - - -**After setup** - -On a desktop computer, navigate to **Settings** > **Accounts** > **Work access** > **Add or remove a management package** > **Add a package**, and selects the package to install. - -![add a package option](images/package.png) - -> [!NOTE] -> If you apply the setup file to a computer that has already been set up, existing accounts and data might be lost. - -## Guidance for accounts on shared PCs - -* We recommend no local admin accounts on the PC to improve the reliability and security of the PC. -* When a PC is set up in shared PC mode, accounts will be cached automatically until disk space is low. Then, accounts will be deleted to reclaim disk space. This account managment happens automatically. Both Azure AD and Active Directory domain accounts are managed in this way. Any accounts created through **Start without an account** will also be deleted automatically at sign out. -* On a Windows PC joined to Azure Active Directory: - * By default, the account that joined the PC to Azure AD will have an admin account on that PC. Global administrators for the Azure AD domain will also have admin accounts on the PC. - * With Azure AD Premium, you can specify which accounts have admin accounts on a PC using the **Additional administrators on Azure AD Joined devices** setting on the Azure portal. -* Local accounts that already exist on a PC won’t be deleted when turning on shared PC mode. New local accounts that are created using **Settings > Accounts > Other people > Add someone else to this PC** after shared PC mode is turned on won't be deleted. However, any new local accounts created by the **Start without an account** selection on the sign-in screen (if enabled) will automatically be deleted at sign-out. -* If admin accounts are necessary on the PC - * Ensure the PC is joined to a domain that enables accounts to be signed on as admin, or - * Create admin accounts before setting up shared PC mode, or - * Create exempt accounts before signing out when turning shared pc mode on. -* The account management service supports accounts that are exempt from deletion. - * An account can be marked exempt from deletion by adding the account SID to the `HKEY_LOCAL_MACHINE\SOFTARE\Microsoft\Windows\CurrentVersion\SharedPC\Exemptions\` registry key. - * To add the account SID to the registry key using PowerShell:
- ``` - $adminName = "LocalAdmin" - $adminPass = 'Pa$$word123' - iex "net user /add $adminName $adminPass" - $user = New-Object System.Security.Principal.NTAccount($adminName) - $sid = $user.Translate([System.Security.Principal.SecurityIdentifier]) - $sid = $sid.Value; - New-Item -Path "HKLM:\Software\Microsoft\Windows\CurrentVersion\SharedPC\Exemptions\$sid" -Force - ``` - - - - -## Policies set by shared PC mode -Shared PC mode sets local group policies to configure the device. Some of these are configurable using the shared pc mode options. - -> [!IMPORTANT] -> It is not recommended to set additional policies on PCs configured for **Shared PC Mode**. The shared PC mode has been optimized to be fast and reliable over time with minimal to no manual maintenance required. - -
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

Policy name

Value

When set?

Admin Templates > Control Panel > Personalization

Prevent enabling lock screen slide show

Enabled

Always

Prevent changing lock screen and logon image

Enabled

Always

Admin Templates > System > Power Management > Button Settings

Select the Power button action (plugged in)

Sleep

SetPowerPolicies=True

Select the Power button action (on battery)

Sleep

SetPowerPolicies=True

Select the Sleep button action (plugged in)

Sleep

SetPowerPolicies=True

Select the lid switch action (plugged in)

Sleep

SetPowerPolicies=True

Select the lid switch action (on battery)

Sleep

SetPowerPolicies=True

Admin Templates > System > Power Management > Sleep Settings

Require a password when a computer wakes (plugged in)

Enabled

SignInOnResume=True

Require a password when a computer wakes (on battery)

Enabled

SignInOnResume=True

Specify the system sleep timeout (plugged in)

*SleepTimeout*

SetPowerPolicies=True

Specify the system sleep timeout (on battery)

*SleepTimeout*

SetPowerPolicies=True

Turn off hybrid sleep (plugged in)

Enabled

SetPowerPolicies=True

Turn off hybrid sleep (on battery)

Enabled

SetPowerPolicies=True

Specify the unattended sleep timeout (plugged in)

*SleepTimeout*

SetPowerPolicies=True

Specify the unattended sleep timeout (on battery)

*SleepTimeout*

SetPowerPolicies=True

Allow standby states (S1-S3) when sleeping (plugged in)

Enabled

SetPowerPolicies=True

Allow standby states (S1-S3) when sleeping (on battery)

Enabled

SetPowerPolicies=True

Specify the system hibernate timeout (plugged in)

Enabled, 0

SetPowerPolicies=True

Specify the system hibernate timeout (on battery)

Enabled, 0

SetPowerPolicies=True

Admin Templates>System>Power Management>Video and Display Settings

Turn off the display (plugged in)

*SleepTimeout*

SetPowerPolicies=True

Turn off the display (on battery

*SleepTimeout*

SetPowerPolicies=True

Admin Templates>System>Logon

Show first sign-in animation

Disabled

Always

Hide entry points for Fast User Switching

Enabled

Always

Turn on convenience PIN sign-in

Disabled

Always

Turn off picture password sign-in

Enabled

Always

Turn off app notification on the lock screen

Enabled

Always

Allow users to select when a password is required when resuming from connected standby

Disabled

SignInOnResume=True

Block user from showing account details on sign-in

Enabled

Always

Admin Templates>System>User Profiles

Turn off the advertising ID

Enabled

SetEduPolicies=True

Admin Templates>Windows Components

Do not show Windows Tips

*Only on Pro, Enterprise, Pro Education, and Education*

Enabled

SetEduPolicies=True

Turn off Microsoft consumer experiences

*Only on Pro, Enterprise, Pro Education, and Education*

Enabled

SetEduPolicies=True

Microsoft Passport for Work

Disabled

Always

Prevent the usage of OneDrive for file storage

Enabled

Always

Admin Templates>Windows Components>Biometrics

Allow the use of biometrics

Disabled

Always

Allow users to log on using biometrics

Disabled

Always

Allow domain users to log on using biometrics

Disabled

Always

Admin Templates>Windows Components>Data Collection and Preview Builds

Toggle user control over Insider builds

Disabled

Always

Disable pre-release features or settings

Disabled

Always

Do not show feedback notifications

Enabled

Always

Admin Templates>Windows Components>File Explorer

Show lock in the user tile menu

Disabled

Always

Admin Templates>Windows Components>Maintenance Scheduler

Automatic Maintenance Activation Boundary

*MaintenanceStartTime*

Always

Automatic Maintenance Random Delay

Enabled, 2 hours

Always

Automatic Maintenance WakeUp Policy

Enabled

Always

Admin Templates>Windows Components>Microsoft Edge

Open a new tab with an empty tab

Disabled

SetEduPolicies=True

Configure corporate home pages

Enabled, about:blank

SetEduPolicies=True

Admin Templates>Windows Components>Search

Allow Cortana

Disabled

SetEduPolicies=True

Windows Settings>Security Settings>Local Policies>Security Options

Interactive logon: Do not display last user name

Enabled, Disabled when account model is only guest

Always

Interactive logon: Sign-in last interactive user automatically after a system-initiated restart

Disabled

Always

Shutdown: Allow system to be shut down without having to log on

Disabled

Always

User Account Control: Behavior of the elevation prompt for standard users

Auto deny

Always



- - - -## Related topics - -[Set up a device for anyone to use (kiosk)](set-up-a-device-for-anyone-to-use.md) - - -  - -  - - - - - diff --git a/windows/whats-new/images/bulk-token.PNG b/windows/whats-new/images/bulk-token.PNG new file mode 100644 index 0000000000..b0d2221824 Binary files /dev/null and b/windows/whats-new/images/bulk-token.PNG differ diff --git a/windows/whats-new/images/wcd-options.png b/windows/whats-new/images/wcd-options.png index e7a89454b8..b3d998ba1b 100644 Binary files a/windows/whats-new/images/wcd-options.png and b/windows/whats-new/images/wcd-options.png differ diff --git a/windows/whats-new/whats-new-windows-10-version-1607.md b/windows/whats-new/whats-new-windows-10-version-1607.md index 1c6c94f739..265b3b3910 100644 --- a/windows/whats-new/whats-new-windows-10-version-1607.md +++ b/windows/whats-new/whats-new-windows-10-version-1607.md @@ -130,7 +130,7 @@ Numerous settings have been added to the Windows 10 CSPs to expand MDM capabilit ### Shared PC mode -Windows 10, Version 1607, introduces shared PC mode, which optimizes Windows 10 for shared use scenarios, such as touchdown spaces in an enterprise and temporary customer use in retail. You can apply shared PC mode to Windows 10 Pro, Education, and Enterprise. [Learn how to set up a shared or guest PC.](../manage/set-up-shared-or-guest-pc.md) +Windows 10, Version 1607, introduces shared PC mode, which optimizes Windows 10 for shared use scenarios, such as touchdown spaces in an enterprise and temporary customer use in retail. You can apply shared PC mode to Windows 10 Pro, Education, and Enterprise. [Learn how to set up a shared or guest PC.](../configure/set-up-shared-or-guest-pc.md) ### Application Virtualization (App-V) for Windows 10 diff --git a/windows/whats-new/whats-new-windows-10-version-1703.md b/windows/whats-new/whats-new-windows-10-version-1703.md index 6f4913087b..fe76aacdf4 100644 --- a/windows/whats-new/whats-new-windows-10-version-1703.md +++ b/windows/whats-new/whats-new-windows-10-version-1703.md @@ -29,6 +29,12 @@ Windows Configuration Designer in Windows 10, version 1703, includes several new [Learn more about Windows Configuration Designer.](../configure/provisioning-packages.md) +### Bulk enrollment in Azure Active Directory + +Using the new wizards in Windows Configuration Designer, you can [create provisioning packages to enroll devices in Azure Active Directory](../configure/provisioning-packages.md#configuration-designer-wizards). Bulk enrollment in Azure AD is available in the desktop, mobile, kiosk, and Surface Hub wizards. + +![get bulk token action in wizard](images/bulk-token.png) + ### Windows Spotlight The following new Group Policy and mobile device management (MDM) settings are added to help you configure Windows Spotlight user experiences: