From 0c02e04b6f3d8780b4b2927be2ea24717e504873 Mon Sep 17 00:00:00 2001 From: Liza Poggemeyer Date: Fri, 7 Jun 2019 14:17:57 -0700 Subject: [PATCH] fixed art links in Surface article, trying to fix first note issue --- .../surface/surface-enterprise-management-mode.md | 14 +++++++------- ...cess-to-packages-with-the-management-console.md | 4 ++-- 2 files changed, 9 insertions(+), 9 deletions(-) diff --git a/devices/surface/surface-enterprise-management-mode.md b/devices/surface/surface-enterprise-management-mode.md index 5dfb51b75b..9244515eb1 100644 --- a/devices/surface/surface-enterprise-management-mode.md +++ b/devices/surface/surface-enterprise-management-mode.md @@ -29,7 +29,7 @@ There are two administrative options you can use to manage SEMM and enrolled Sur The primary workspace of SEMM is Microsoft Surface UEFI Configurator, as shown in Figure 1. Microsoft Surface UEFI Configurator is a tool that is used to create Windows Installer (.msi) packages or WinPE images that are used to enroll, configure, and unenroll SEMM on a Surface device. These packages contain a configuration file where the settings for UEFI are specified. SEMM packages also contain a certificate that is installed and stored in firmware and used to verify the signature of configuration files before UEFI settings are applied. -![Microsoft Surface UEFI Configurator](images\surface-ent-mgmt-fig1-uefi-configurator.png "Microsoft Surface UEFI Configurator") +![Microsoft Surface UEFI Configurator](images/surface-ent-mgmt-fig1-uefi-configurator.png "Microsoft Surface UEFI Configurator") *Figure 1. Microsoft Surface UEFI Configurator* @@ -51,7 +51,7 @@ You can download Microsoft Surface UEFI Configurator from the [Surface Tools for Surface UEFI configuration packages are the primary mechanism to implement and manage SEMM on Surface devices. These packages contain a configuration file of UEFI settings specified during creation of the package in Microsoft Surface UEFI Configurator and a certificate file, as shown in Figure 2. When a configuration package is run for the first time on a Surface device that is not already enrolled in SEMM, it provisions the certificate file in the device’s firmware and enrolls the device in SEMM. When enrolling a device in SEMM, you will be prompted to confirm the operation by providing the last two digits of the SEMM certificate thumbprint before the certificate file is stored and the enrollment can complete. This confirmation requires that a user be present at the device at the time of enrollment to perform the confirmation. -![Secure a SEMM configuration package with a certificate](images\surface-ent-mgmt-fig2-securepackage.png "Secure a SEMM configuration package with a certificate") +![Secure a SEMM configuration package with a certificate](images/surface-ent-mgmt-fig2-securepackage.png "Secure a SEMM configuration package with a certificate") *Figure 2. Secure a SEMM configuration package with a certificate* @@ -64,11 +64,11 @@ After a device is enrolled in SEMM, the configuration file is read and the setti You can use Surface UEFI settings to enable or disable the operation of individual components, such as cameras, wireless communication, or docking USB port (as shown in Figure 3), and configure advanced settings (as shown in Figure 4). -![Enable or disable devices in Surface UEFI with SEMM](images\surface-ent-mgmt-fig3-enabledisable.png "Enable or disable devices in Surface UEFI with SEMM") +![Enable or disable devices in Surface UEFI with SEMM](images/surface-ent-mgmt-fig3-enabledisable.png "Enable or disable devices in Surface UEFI with SEMM") *Figure 3. Enable or disable devices in Surface UEFI with SEMM* -![Configure advanced settings in SEMM](images\surface-ent-mgmt-fig4-advancedsettings.png "Configure advanced settings in SEMM") +![Configure advanced settings in SEMM](images/surface-ent-mgmt-fig4-advancedsettings.png "Configure advanced settings in SEMM") *Figure 4. Configure advanced settings with SEMM* @@ -102,13 +102,13 @@ You can configure the following advanced settings with SEMM: >[!NOTE] >When you create a SEMM configuration package, two characters are shown on the **Successful** page, as shown in Figure 5. -![Certificate thumbprint display](images\surface-ent-mgmt-fig5-success.png "Certificate thumbprint display") +![Certificate thumbprint display](images/surface-ent-mgmt-fig5-success.png "Certificate thumbprint display") *Figure 5. Display of the last two characters of the certificate thumbprint on the Successful page* These characters are the last two characters of the certificate thumbprint and should be written down or recorded. The characters are required to confirm enrollment in SEMM on a Surface device, as shown in Figure 6. -![Enrollment confirmation in SEMM](images\surface-ent-mgmt-fig6-enrollconfirm.png "Enrollment confirmation in SEMM") +![Enrollment confirmation in SEMM](images/surface-ent-mgmt-fig6-enrollconfirm.png "Enrollment confirmation in SEMM") *Figure 6. Enrollment confirmation in SEMM with the SEMM certificate thumbprint* @@ -134,7 +134,7 @@ A Surface UEFI reset package is used to perform only one task — to unenroll a In some scenarios, it may be impossible to use a Surface UEFI reset package. (For example, if Windows becomes unusable on the Surface device.) In these scenarios you can unenroll the Surface device from SEMM through the **Enterprise Management** page of Surface UEFI (shown in Figure 7) with a Recovery Request operation. -![Initiate a SEMM recovery request](images\surface-ent-mgmt-fig7-semmrecovery.png "Initiate a SEMM recovery request") +![Initiate a SEMM recovery request](images/surface-ent-mgmt-fig7-semmrecovery.png "Initiate a SEMM recovery request") *Figure 7. Initiate a SEMM recovery request on the Enterprise Management page* diff --git a/windows/application-management/app-v/appv-configure-access-to-packages-with-the-management-console.md b/windows/application-management/app-v/appv-configure-access-to-packages-with-the-management-console.md index 37dabf15e1..beedebb563 100644 --- a/windows/application-management/app-v/appv-configure-access-to-packages-with-the-management-console.md +++ b/windows/application-management/app-v/appv-configure-access-to-packages-with-the-management-console.md @@ -34,8 +34,8 @@ Use the following procedure to configure access to virtualized packages. 1. Using the format **mydomain** \\ **groupname**, enter the name or part of the name of an Active Directory group object, then select **Check**. - > [!NOTE]   - > Ensure that you provide an associated domain name for the group that you are searching for. + > [!NOTE]   + > Ensure that you provide an associated domain name for the group that you are searching for. 3. Grant access to the package by first selecting the desired group, then selecting **Grant Access**. The newly added group is displayed in the **AD entities with access** pane.