+ **System/AllowDeviceNameInDiagnosticData** @@ -488,7 +489,7 @@ The following list shows the supported values: -Added in Windows 10, version 1703. Boolean policy setting that determines whether Windows is allowed to download fonts and font catalog data from an online font provider. If you enable this setting, Windows periodically queries an online font provider to determine whether a new font catalog is available. Windows may also download font data if needed to format or render text. If you disable this policy setting, Windows does not connect to an online font provider and only enumerates locally-installed fonts. +Added in Windows 10, version 1703. Boolean policy setting that determines whether Windows is allowed to download fonts and font catalog data from an online font provider. If you enable this setting, Windows periodically queries an online font provider to determine whether a new font catalog is available. Windows may also download font data if needed to format or render text. If you disable this policy setting, Windows does not connect to an online font provider and only enumerates locally installed fonts. This MDM setting corresponds to the EnableFontProviders Group Policy setting. If both the Group Policy and the MDM settings are configured, the group policy setting takes precedence. If neither is configured, the behavior depends on a DisableFontProviders registry value. In server editions, this registry value is set to 1 by default, so the default behavior is false (disabled). In all other editions, the registry value is not set by default, so the default behavior is true (enabled). @@ -509,7 +510,7 @@ ADMX Info: The following list shows the supported values: -- 0 - false - No traffic to fs.microsoft.com and only locally-installed fonts are available. +- 0 - false - No traffic to fs.microsoft.com and only locally installed fonts are available. - 1 - true (default) - There may be network traffic to fs.microsoft.com and downloadable fonts are available to apps that support them. @@ -1605,7 +1606,7 @@ The following list shows the supported values: This policy setting, in combination with the System/AllowTelemetry policy setting, enables organizations to send Microsoft a specific set of diagnostic data for IT insights via Windows Analytics services. -To enable this behavior you must complete two steps: +To enable this behavior, you must complete two steps:
- Enable this policy setting
- Set Allow Telemetry to level 2 (Enhanced) diff --git a/windows/client-management/mdm/policy-csp-windowssandbox.md b/windows/client-management/mdm/policy-csp-windowssandbox.md new file mode 100644 index 0000000000..a00be7e6d7 --- /dev/null +++ b/windows/client-management/mdm/policy-csp-windowssandbox.md @@ -0,0 +1,561 @@ +--- +title: Policy CSP - WindowsSandbox +description: Policy CSP - WindowsSandbox +ms.author: dansimp +ms.topic: article +ms.prod: w10 +ms.technology: windows +author: manikadhiman +ms.localizationpriority: medium +ms.date: 10/14/2020 +--- + +# Policy CSP - WindowsSandbox + +> [!WARNING] +> Some information relates to prereleased products, which may be substantially modified before it's commercially released. Microsoft makes no warranties, expressed or implied, concerning the information provided here. + + +
- + WindowsSandbox/AllowAudioInput + +
- + WindowsSandbox/AllowClipboardRedirection + +
- + WindowsSandbox/AllowNetworking + +
- + WindowsSandbox/AllowPrinterRedirection + +
- + WindowsSandbox/AllowVGPU + +
- + WindowsSandbox/AllowVideoInput + +
+ + +## WindowsSandbox policies + +
-
+
+ + +**WindowsSandbox/AllowAudioInput** + + +
| Windows Edition | +Supported? | +
|---|---|
| Home | + |
+
| Pro | + 9 |
+
| Business | + |
+
| Enterprise | +9 |
+
| Education | +9 |
+
+ + +[Scope](./policy-configuration-service-provider.md#policy-scope): + +> [!div class = "checklist"] +> * Device + +
+ + + +This policy setting allows the IT admin to enable or disable audio input to the Sandbox. + +> [!NOTE] +> There may be security implications of exposing host audio input to the container. + +If this policy is not configured, end-users get the default behavior (audio input enabled). + +If audio input is disabled, a user will not be able to enable audio input from their own configuration file. + +If audio input is enabled, a user will be able to disable audio input from their own configuration file to make the device more secure. + +> [!NOTE] +> You must restart Windows Sandbox for any changes to this policy setting to take effect. + + + +ADMX Info: + +- GP English Name: *Allow audio input in Windows Sandbox* +- GP name: *AllowAudioInput* +- GP path: *Windows Components/Windows Sandbox* +- GP ADMX file name: *WindowsSandbox.admx* + + + +The following are the supported values: + +- 0 - Disabled +- 1 (default) - Enabled + + + + + + + + + + +
+ + + +**WindowsSandbox/AllowClipboardRedirection** + + +
| Windows Edition | +Supported? | +
|---|---|
| Home | + |
+
| Pro | +9 |
+
| Business | + |
+
| Enterprise | +9 |
+
| Education | +9 |
+
+ + +[Scope](./policy-configuration-service-provider.md#policy-scope): + +> [!div class = "checklist"] +> * Device + +
+ + + +This policy setting allows the IT admin to enable or disable sharing of the host clipboard with the sandbox. + +If this policy is not configured, end-users get the default behavior (clipboard redirection enabled. + +If clipboard sharing is disabled, a user will not be able to enable clipboard sharing from their own configuration file. + +If clipboard sharing is enabled, a user will be able to disable clipboard sharing from their own configuration file to make the device more secure. + +> [!NOTE] +> You must restart Windows Sandbox for any changes to this policy setting to take effect. + + + +ADMX Info: + +- GP English Name: *Allow clipboard sharing with Windows Sandbox* +- GP name: *AllowClipboardRedirection* +- GP path: *Windows Components/Windows Sandbox* +- GP ADMX file name: *WindowsSandbox.admx* + + + +The following are the supported values: + +- 0 - Disabled +- 1 (default) - Enabled + + + + + + + + + + + +
+ + +**WindowsSandbox/AllowNetworking** + + +
| Windows Edition | +Supported? | +
|---|---|
| Home | + |
+
| Pro | +9 |
+
| Business | + |
+
| Enterprise | +9 |
+
| Education | +9 |
+
+ + +[Scope](./policy-configuration-service-provider.md#policy-scope): + +> [!div class = "checklist"] +> * Device + +
+ + + +This policy setting allows the IT admin to enable or disable networking in Windows Sandbox. Disabling network access can decrease the attack surface exposed by the Sandbox. Enabling networking can expose untrusted applications to the internal network. + +If this policy is not configured, end-users get the default behavior (networking enabled). + +If networking is disabled, a user will not be able to enable networking from their own configuration file. + +If networking is enabled, a user will be able to disable networking from their own configuration file to make the device more secure. + +> [!NOTE] +> You must restart Windows Sandbox for any changes to this policy setting to take effect. + + + +ADMX Info: + +- GP English Name: *Allow networking in Windows Sandbox* +- GP name: *AllowNetworking* +- GP path: *Windows Components/Windows Sandbox* +- GP ADMX file name: *WindowsSandbox.admx* + + + +The following are the supported values: +- 0 - Disabled +- 1 (default) - Enabled + + + + + + + + + + +
+ + +**WindowsSandbox/AllowPrinterRedirection** + + +
| Windows Edition | +Supported? | +
|---|---|
| Home | + |
+
| Pro | +9 |
+
| Business | + |
+
| Enterprise | +9 |
+
| Education | +9 |
+
+ + +[Scope](./policy-configuration-service-provider.md#policy-scope): + +> [!div class = "checklist"] +> * Device + +
+ + + +This policy setting allows the IT admin to enable or disable printer sharing from the host into the Sandbox. + +If this policy is not configured, end-users get the default behavior (printer sharing disabled). + +If printer sharing is disabled, a user will not be able to enable printer sharing from their own configuration file. + +If printer sharing is enabled, a user will be able to disable printer sharing from their own configuration file to make the device more secure. + +> [!NOTE] +> You must restart Windows Sandbox for any changes to this policy setting to take effect. + + + +ADMX Info: + +- GP English Name: *Allow printer sharing with Windows Sandbox* +- GP name: *AllowPrinterRedirection* +- GP path: *Windows Components/Windows Sandbox* +- GP ADMX file name: *WindowsSandbox.admx* + + + +The following are the supported values: + +- 0 - Disabled +- 1 (default) - Enabled + + + + + + + + + + +
+ + +**WindowsSandbox/AllowVGPU** + + +
| Windows Edition | +Supported? | +
|---|---|
| Home | + |
+
| Pro | +9 |
+
| Business | + |
+
| Enterprise | +9 |
+
| Education | +9 |
+
+ + +[Scope](./policy-configuration-service-provider.md#policy-scope): + +> [!div class = "checklist"] +> * Device + +
+ + + +This policy setting allows the IT admin to enable or disable virtualized GPU for Windows Sandbox. + +> [!NOTE] +> Enabling virtualized GPU can potentially increase the attack surface of Windows Sandbox. + +If this policy is not configured, end-users get the default behavior (vGPU is disabled). + +If vGPU is disabled, a user will not be able to enable vGPU support from their own configuration file. + +If vGPU is enabled, a user will be able to disable vGPU support from their own configuration file to make the device more secure. + +> [!NOTE] +> You must restart Windows Sandbox for any changes to this policy setting to take effect. + + + +ADMX Info: + +- GP English Name: *Allow vGPU sharing for Windows Sandbox* +- GP name: *AllowVGPU* +- GP path: *Windows Components/Windows Sandbox* +- GP ADMX file name: *WindowsSandbox.admx* + + + +The following are the supported values: + +- 0 (default) - Disabled +- 1 - Enabled + + + + + + + + + + +
+ + +**WindowsSandbox/AllowVideoInput** + + +
| Windows Edition | +Supported? | +
|---|---|
| Home | + |
+
| Pro | +9 |
+
| Business | + |
+
| Enterprise | +9 |
+
| Education | +9 |
+
+ + +[Scope](./policy-configuration-service-provider.md#policy-scope): + +> [!div class = "checklist"] +> * Device + +
+ + + +This policy setting allows the IT admin to enable or disable video input to the Sandbox. + +> [!NOTE] +> There may be security implications of exposing host video input to the container. + +If this policy is not configured, users get the default behavior (video input disabled). + +If video input is disabled, users will not be able to enable video input from their own configuration file. + +If video input is enabled, users will be able to disable video input from their own configuration file to make the device more secure. + +> [!NOTE] +> You must restart Windows Sandbox for any changes to this policy setting to take effect. + + + +ADMX Info: +- GP English Name: *Allow video input in Windows Sandbox* +- GP name: *AllowVideoInput* +- GP path: *Windows Components/Windows Sandbox* +- GP ADMX file name: *WindowsSandbox.admx* + + + +The following are the supported values: + +- 0 (default) - Disabled +- 1 - Enabled + + + + + + + + + + +
+ +Footnotes: + +- 1 - Available in Windows 10, version 1607. +- 2 - Available in Windows 10, version 1703. +- 3 - Available in Windows 10, version 1709. +- 4 - Available in Windows 10, version 1803. +- 5 - Available in Windows 10, version 1809. +- 6 - Available in Windows 10, version 1903. +- 7 - Available in Windows 10, version 1909. +- 8 - Available in Windows 10, version 2004. +- 9 - Available in Windows 10, version 2010. + + diff --git a/windows/security/information-protection/windows-information-protection/create-wip-policy-using-intune-azure.md b/windows/security/information-protection/windows-information-protection/create-wip-policy-using-intune-azure.md index f3735bbd48..7f89a245b5 100644 --- a/windows/security/information-protection/windows-information-protection/create-wip-policy-using-intune-azure.md +++ b/windows/security/information-protection/windows-information-protection/create-wip-policy-using-intune-azure.md @@ -593,7 +593,7 @@ After you've decided where your protected apps can access enterprise data on you **Use Azure RMS for WIP.** Determines whether WIP uses [Microsoft Azure Rights Management](https://products.office.com/business/microsoft-azure-rights-management) to apply EFS encryption to files that are copied from Windows 10 to USB or other removable drives so they can be securely shared amongst employees. In other words, WIP uses Azure Rights Management "machinery" to apply EFS encryption to files when they are copied to removable drives. You must already have Azure Rights Management set up. The EFS file encryption key is protected by the RMS template’s license. Only users with permission to that template will be able to read it from the removable drive. WIP can also integrate with Azure RMS by using the **AllowAzureRMSForEDP** and the **RMSTemplateIDForEDP** MDM settings in the [EnterpriseDataProtection CSP](https://msdn.microsoft.com/windows/hardware/commercialize/customize/mdm/enterprisedataprotection-csp). -- **On.** Protects files that are copied to a removable drive. You can enter a TemplateID GUID to specify who can access the Azure Rights Management protected files, and for how long. The RMS template is only applied to the files on removable media, and is only used for access control—it doesn’t actually apply Azure Information Protection to the files. Curly braces {} are required around the RMS Template ID, but they are removed after you save the policy. +- **On.** Protects files that are copied to a removable drive. You can enter a TemplateID GUID to specify who can access the Azure Rights Management protected files, and for how long. The RMS template is only applied to the files on removable media, and is only used for access control—it doesn’t actually apply Azure Information Protection to the files. If you don’t specify an [RMS template](https://docs.microsoft.com/information-protection/deploy-use/configure-custom-templates), it’s a regular EFS file using a default RMS template that all users can access. diff --git a/windows/security/information-protection/windows-information-protection/enlightened-microsoft-apps-and-wip.md b/windows/security/information-protection/windows-information-protection/enlightened-microsoft-apps-and-wip.md index a099742145..ebe3c59220 100644 --- a/windows/security/information-protection/windows-information-protection/enlightened-microsoft-apps-and-wip.md +++ b/windows/security/information-protection/windows-information-protection/enlightened-microsoft-apps-and-wip.md @@ -73,6 +73,8 @@ Microsoft has made a concerted effort to enlighten several of our more popular a - Microsoft Remote Desktop +- Microsoft To Do + > [!NOTE] > Microsoft Visio, Microsoft Office Access, Microsoft Project, and Microsoft Publisher are not enlightened apps and need to be exempted from WIP policy. If they are allowed, there is a risk of data loss. For example, if a device is workplace-joined and managed and the user leaves the company, metadata files that the apps rely on remain encrypted and the apps stop functioning. @@ -113,6 +115,7 @@ You can add any or all of the enlightened Microsoft apps to your allowed apps li | Microsoft Paint | **Publisher:** `O=Microsoft Corporation, L=Redmond, S=Washington, C=US`
**Binary Name:** mspaint.exe
**App Type:** Desktop app | | Microsoft Remote Desktop | **Publisher:** `O=Microsoft Corporation, L=Redmond, S=Washington, C=US`
**Binary Name:** mstsc.exe
**App Type:** Desktop app | | Microsoft MAPI Repair Tool | **Publisher:** `O=Microsoft Corporation, L=Redmond, S=Washington, C=US`
**Binary Name:** fixmapi.exe
**App Type:** Desktop app | +| Microsoft To Do | **Publisher:** `O=Microsoft Corporation, L=Redmond, S=Washington, C=US`
**Product Name:** Microsoft.Todos
**App Type:** Store app | >[!NOTE] >Help to make this topic better by providing us with edits, additions, and feedback. For info about how to contribute to this topic, see [Editing Windows IT professional documentation](https://github.com/Microsoft/windows-itpro-docs/blob/master/CONTRIBUTING.md). diff --git a/windows/security/threat-protection/auditing/advanced-security-audit-policy-settings.md b/windows/security/threat-protection/auditing/advanced-security-audit-policy-settings.md index 1ce7884399..2893cf7ece 100644 --- a/windows/security/threat-protection/auditing/advanced-security-audit-policy-settings.md +++ b/windows/security/threat-protection/auditing/advanced-security-audit-policy-settings.md @@ -42,7 +42,7 @@ Configuring policy settings in this category can help you document attempts to a - [Audit Credential Validation](audit-credential-validation.md) - [Audit Kerberos Authentication Service](audit-kerberos-authentication-service.md) - [Audit Kerberos Service Ticket Operations](audit-kerberos-service-ticket-operations.md) -- [Audit Other Logon/Logoff Events](audit-other-logonlogoff-events.md) +- [Audit Other Account Logon Events](audit-other-account-logon-events.md) ## Account Management @@ -150,8 +150,8 @@ Auditors will be able to prove that every resource in the system is protected by Resource SACLs are also useful for diagnostic scenarios. For example, setting the Global Object Access Auditing policy to log all the activity for a specific user and enabling the policy to track "Access denied" events for the file system or registry can help administrators quickly identify which object in a system is denying a user access. -> **Note:** If a file or folder SACL and a Global Object Access Auditing policy setting (or a single registry setting SACL and a Global Object Access Auditing policy setting) are configured on a computer, the effective SACL is derived from combining the file or folder SACL and the Global Object -Access Auditing policy. This means that an audit event is generated if an activity matches the file or folder SACL or the Global Object Access Auditing policy. +> [!NOTE] +> If a file or folder SACL and a Global Object Access Auditing policy setting (or a single registry setting SACL and a Global Object Access Auditing policy setting) are configured on a computer, the effective SACL is derived from combining the file or folder SACL and the Global Object Access Auditing policy. This means that an audit event is generated if an activity matches the file or folder SACL or the Global Object Access Auditing policy. This category includes the following subcategories: - [File System (Global Object Access Auditing)](file-system-global-object-access-auditing.md) diff --git a/windows/security/threat-protection/auditing/event-4625.md b/windows/security/threat-protection/auditing/event-4625.md index 84cf52d450..220876b84a 100644 --- a/windows/security/threat-protection/auditing/event-4625.md +++ b/windows/security/threat-protection/auditing/event-4625.md @@ -166,7 +166,7 @@ This event generates on domain controllers, member servers, and workstations. | 0xC0000064 | User logon with misspelled or bad user account | | 0xC000006A | User logon with misspelled or bad password | | 0XC000006D | This is either due to a bad username or authentication information | - | 0XC000006E | Unknown user name or bad password. | + | 0XC000006E | Indicates a referenced user name and authentication information are valid, but some user account restriction has prevented successful authentication (such as time-of-day restrictions). | | 0xC000006F | User logon outside authorized hours | | 0xC0000070 | User logon from unauthorized workstation | | 0xC0000071 | User logon with expired password | @@ -284,7 +284,7 @@ For 4625(F): An account failed to log on. - Monitor for all events with the fields and values in the following table: - | **Field** | Value to monitor for | + | Field | Value to monitor for | |----------------------------------------------------------------------------------|-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------| | **Failure Information\\Status** or
**Failure Information\\Sub Status** | 0XC000005E – “There are currently no logon servers available to service the logon request.”
This is typically not a security issue but it can be an infrastructure or availability issue. | | **Failure Information\\Status** or
**Failure Information\\Sub Status** | 0xC0000064 – “User logon with misspelled or bad user account”.
Especially if you get a number of these in a row, it can be a sign of user enumeration attack. | diff --git a/windows/security/threat-protection/microsoft-defender-antivirus/images/win-security- exp-policy-endpt-security.png b/windows/security/threat-protection/microsoft-defender-antivirus/images/win-security- exp-policy-endpt-security.png new file mode 100644 index 0000000000..e4b306fd92 Binary files /dev/null and b/windows/security/threat-protection/microsoft-defender-antivirus/images/win-security- exp-policy-endpt-security.png differ diff --git a/windows/security/threat-protection/microsoft-defender-antivirus/prevent-changes-to-security-settings-with-tamper-protection.md b/windows/security/threat-protection/microsoft-defender-antivirus/prevent-changes-to-security-settings-with-tamper-protection.md index c49d6a763f..6cc3ece08f 100644 --- a/windows/security/threat-protection/microsoft-defender-antivirus/prevent-changes-to-security-settings-with-tamper-protection.md +++ b/windows/security/threat-protection/microsoft-defender-antivirus/prevent-changes-to-security-settings-with-tamper-protection.md @@ -1,6 +1,6 @@ --- title: Protect security settings with tamper protection -ms.reviewer: shwjha +ms.reviewer: shwjha, hayhov manager: dansimp description: Use tamper protection to prevent malicious apps from changing important security settings. keywords: malware, defender, antivirus, tamper protection @@ -14,7 +14,7 @@ audience: ITPro author: denisebmsft ms.author: deniseb ms.custom: nextgen -ms.date: 10/08/2020 +ms.date: 10/14/2020 --- # Protect security settings with tamper protection @@ -136,22 +136,24 @@ If you're using [version 2006 of Configuration Manager](https://docs.microsoft.c 1. Set up tenant attach. See [Microsoft Endpoint Manager tenant attach: Device sync and device actions](https://docs.microsoft.com/mem/configmgr/tenant-attach/device-sync-actions). -2. In the [Microsoft Endpoint Manager admin center](https://go.microsoft.com/fwlink/?linkid=2109431), go to **Endpoint security** > **Antivirus**, and choose **+ Create Policy**. +2. In the [Microsoft Endpoint Manager admin center](https://go.microsoft.com/fwlink/?linkid=2109431), go to **Endpoint security** > **Antivirus**, and choose **+ Create Policy**.
-3. Configure tamper protection as part of the new policy. + - In the **Platform** list, select **Windows 10 and Windows Server (ConfigMgr)**. + + - In the **Profile** list, select **Windows Security experience (preview)**.
+ + The following screenshot illustrates how to create your policy: -4. Deploy the policy to your device collection. + :::image type="content" source="images/win-security- exp-policy-endpt-security.png" alt-text="Windows security experience in Endpoint Manager"::: + +3. Deploy the policy to your device collection. Need help? See the following resources: -- [Antivirus policy for endpoint security in Intune](https://docs.microsoft.com/mem/intune/protect/endpoint-security-antivirus-policy) - - [Settings for the Windows Security experience profile in Microsoft Intune](https://docs.microsoft.com/mem/intune/protect/antivirus-security-experience-windows-settings) - [Tech Community Blog: Announcing Tamper Protection for Configuration Manager Tenant Attach clients](https://techcommunity.microsoft.com/t5/microsoft-endpoint-manager-blog/announcing-tamper-protection-for-configuration-manager-tenant/ba-p/1700246#.X3QLR5Ziqq8.linkedin) -- [Tenant attach: Create and deploy endpoint security Antivirus policy from the admin center (preview)](https://docs.microsoft.com/mem/configmgr/tenant-attach/deploy-antivirus-policy) - ## View information about tampering attempts @@ -161,7 +163,7 @@ When a tampering attempt is detected, an alert is raised in the [Microsoft Defen  -Using [endpoint detection and response](https://docs.microsoft.com/windows/security/threat-protection/microsoft-defender-atp/overview-endpoint-detection-response) and [advanced hunting](https://docs.microsoft.com/windows/security/threat-protection/microsoft-defender-atp/advanced-hunting-overview) capabilities in Microsoft Defender ATP, your security operations team can investigate and address such attempts. +Using [endpoint detection and response](https://docs.microsoft.com/windows/security/threat-protection/microsoft-defender-atp/overview-endpoint-detection-response) and [advanced hunting](https://docs.microsoft.com/windows/security/threat-protection/microsoft-defender-atp/advanced-hunting-overview) capabilities in Microsoft Defender for Endpoint, your security operations team can investigate and address such attempts. ## Review your security recommendations @@ -179,7 +181,7 @@ To learn more about Threat & Vulnerability Management, see [Threat & Vulnerabili ### To which Windows OS versions is configuring tamper protection is applicable? -Windows 10 OS [1709](https://docs.microsoft.com/windows/release-information/status-windows-10-1709), [1803](https://docs.microsoft.com/windows/release-information/status-windows-10-1803), [1809](https://docs.microsoft.com/windows/release-information/status-windows-10-1809-and-windows-server-2019), or later together with [Microsoft Defender Advanced Threat Protection E5](https://www.microsoft.com/microsoft-365/windows/microsoft-defender-atp). +Windows 10 OS [1709](https://docs.microsoft.com/windows/release-information/status-windows-10-1709), [1803](https://docs.microsoft.com/windows/release-information/status-windows-10-1803), [1809](https://docs.microsoft.com/windows/release-information/status-windows-10-1809-and-windows-server-2019), or later together with [Microsoft Defender for Endpoint](https://www.microsoft.com/microsoft-365/windows/microsoft-defender-atp). If you are using Configuration Manager, version 2006 with tenant attach, tamper protection can be extended to Windows Server 2019. See [Tenant attach: Create and deploy endpoint security Antivirus policy from the admin center (preview)](https://docs.microsoft.com/mem/configmgr/tenant-attach/deploy-antivirus-policy). @@ -189,13 +191,13 @@ No. Third-party antivirus offerings will continue to register with the Windows S ### What happens if Microsoft Defender Antivirus is not active on a device? -Tamper protection will not have any impact on such devices. +Devices that are onboarded to Microsoft Defender for Endpoint will have Microsoft Defender Antivirus running in passive mode. Tamper protection will continue to protect the service and its features. ### How can I turn tamper protection on/off? If you are a home user, see [Turn tamper protection on (or off) for an individual machine](#turn-tamper-protection-on-or-off-for-an-individual-machine). -If you are an organization using [Microsoft Defender ATP E5](https://www.microsoft.com/microsoft-365/windows/microsoft-defender-atp), you should be able to manage tamper protection in Intune similar to how you manage other endpoint protection features. See the following sections of this article: +If you are an organization using [Microsoft Defender for Endpoint](https://www.microsoft.com/microsoft-365/windows/microsoft-defender-atp), you should be able to manage tamper protection in Intune similar to how you manage other endpoint protection features. See the following sections of this article: - [Turn tamper protection on (or off) for your organization using Intune](#turn-tamper-protection-on-or-off-for-your-organization-using-intune) @@ -216,9 +218,9 @@ Some sample Microsoft Defender Antivirus settings: Computer Configuration\Administrative Templates\Windows Components\Microsoft Defender Antivirus\Real-time Protection\\
Value `DisableRealtimeMonitoring` = 0 -### For Microsoft Defender ATP E5, is configuring tamper protection in Intune targeted to the entire organization only? +### For Microsoft Defender for Endpoint, is configuring tamper protection in Intune targeted to the entire organization only? -Configuring tamper protection in Intune can be targeted to your entire organization as well as to specific devices and user groups. +Configuring tamper protection in Intune or Microsoft Endpoint Manager can be targeted to your entire organization as well as to specific devices and user groups. ### Can I configure Tamper Protection in Microsoft Endpoint Configuration Manager? @@ -226,9 +228,9 @@ If you are using tenant attach, you can use Microsoft Endpoint Configuration Man ### I have the Windows E3 enrollment. Can I use configuring tamper protection in Intune? -Currently, configuring tamper protection in Intune is only available for customers who have [Microsoft Defender Advanced Threat Protection E5](https://www.microsoft.com/microsoft-365/windows/microsoft-defender-atp). +Currently, configuring tamper protection in Intune is only available for customers who have [Microsoft Defender for Endpoint](https://www.microsoft.com/microsoft-365/windows/microsoft-defender-atp). -### What happens if I try to change Microsoft Defender ATP settings in Intune, Microsoft Endpoint Configuration Manager, and Windows Management Instrumentation when Tamper Protection is enabled on a device? +### What happens if I try to change Microsoft Defender for Endpoint settings in Intune, Microsoft Endpoint Configuration Manager, and Windows Management Instrumentation when Tamper Protection is enabled on a device? You won’t be able to change the features that are protected by tamper protection; such change requests are ignored. @@ -236,9 +238,9 @@ You won’t be able to change the features that are protected by tamper protecti No. Local admins cannot change or modify tamper protection settings. -### What happens if my device is onboarded with Microsoft Defender ATP and then goes into an off-boarded state? +### What happens if my device is onboarded with Microsoft Defender for Endpoint and then goes into an off-boarded state? -In this case, tamper protection status changes, and this feature is no longer applied. +If a device is off-boarded from Microsoft Defender for Endpoint, tamper protection is turned on, which is the default state for unmanaged devices. ### Will there be an alert about tamper protection status changing in the Microsoft Defender Security Center? @@ -254,6 +256,6 @@ In addition, your security operations team can use hunting queries, such as the [Help secure Windows PCs with Endpoint Protection for Microsoft Intune](https://docs.microsoft.com/intune/help-secure-windows-pcs-with-endpoint-protection-for-microsoft-intune) -[Get an overview of Microsoft Defender ATP E5](https://www.microsoft.com/microsoft-365/windows/microsoft-defender-atp) +[Get an overview of Microsoft Defender for Endpoint](https://www.microsoft.com/microsoft-365/windows/microsoft-defender-atp) -[Better together: Microsoft Defender Antivirus and Microsoft Defender Advanced Threat Protection](why-use-microsoft-defender-antivirus.md) +[Better together: Microsoft Defender Antivirus and Microsoft Defender for Endpoint](why-use-microsoft-defender-antivirus.md) diff --git a/windows/security/threat-protection/microsoft-defender-atp/api-portal-mapping.md b/windows/security/threat-protection/microsoft-defender-atp/api-portal-mapping.md index 19a2f46e0c..b8454c4935 100644 --- a/windows/security/threat-protection/microsoft-defender-atp/api-portal-mapping.md +++ b/windows/security/threat-protection/microsoft-defender-atp/api-portal-mapping.md @@ -72,6 +72,8 @@ Field numbers match the numbers in the images below. > | | LogOnUsers | sourceUserId | contoso\liz-bean; contoso\jay-hardee | The domain and user of the interactive logon user/s at the time of the event. Note: For devices on Windows 10 version 1607, the domain information will not be available. | > | | InternalIPv4List | No mapping | 192.168.1.7, 10.1.14.1 | List of IPV4 internal IPs for active network interfaces. | > | | InternalIPv6List | No mapping | fd30:0000:0000:0001:ff4e:003e:0009:000e, FE80:CD00:0000:0CDE:1257:0000:211E:729C | List of IPV6 internal IPs for active network interfaces. | +| | LinkToMTP | flexString1 | `https://security.microsoft.com/alert/da637370718981685665_16349121` | Value available for every Detection. +| | IncidentLinkToMTP | flexString1 | `"https://security.microsoft.com/incidents/byalert?alertId=da637370718981685665_16349121&source=SIEM` | Value available for every Detection. > | Internal field | LastProcessedTimeUtc | No mapping | 2017-05-07T01:56:58.9936648Z | Time when event arrived at the backend. This field can be used when setting the request parameter for the range of time that detections are retrieved. | > | | Not part of the schema | deviceVendor | | Static value in the ArcSight mapping - 'Microsoft'. | > | | Not part of the schema | deviceProduct | | Static value in the ArcSight mapping - 'Microsoft Defender ATP'. | diff --git a/windows/security/threat-protection/microsoft-defender-atp/ios-privacy-statement.md b/windows/security/threat-protection/microsoft-defender-atp/ios-privacy-statement.md deleted file mode 100644 index 04c810e52c..0000000000 --- a/windows/security/threat-protection/microsoft-defender-atp/ios-privacy-statement.md +++ /dev/null @@ -1,60 +0,0 @@ ---- -title: Microsoft Defender ATP for iOS note on Privacy -ms.reviewer: -description: Describes the Microsoft Defender ATP for iOS Privacy -keywords: microsoft, defender, atp, iOS, license, terms, application, use, installation, service, feedback, scope, -search.product: eADQiWindows 10XVcnh -search.appverid: met150 -ms.prod: w10 -ms.mktglfcycl: deploy -ms.sitesec: library -ms.pagetype: security -ms.author: sunasing -author: sunasing -ms.localizationpriority: medium -manager: dansimp -audience: ITPro -ms.collection: -- m365-security-compliance -- m365initiative-defender-endpoint -ms.topic: conceptual -hideEdit: true ---- - -# Microsoft Defender ATP for iOS note on Privacy - -[!INCLUDE [Microsoft 365 Defender rebranding](../../includes/microsoft-defender.md)] - - -## What information can my organization see when I use Microsoft Defender ATP on iOS - -Your organization cannot see your personal information when you use Microsoft Defender ATP. Microsoft Defender ATP sends certain pieces of information from your device to the ATP portal, such as device threat level, device model, and serial number. Your organization uses this information to help protect you from web-based attacks. - -**What your organization can never see:** - -- Calling and web browsing history -- Email and text messages -- Contacts -- Calendar -- Passwords -- Pictures, including what's in the photos app or camera roll -- Files - -**What your organization can see:** - -- Malicious Connections that were blocked by Microsoft Defender ATP -- Device model, like iPhone 11 -- Operating system and version, like iOS 12.0.1 -- Device name -- Device serial number - -## VPN Usage - -Microsoft Defender ATP for iOS uses VPN in order to provide the Web Protection feature. This is not a regular VPN and is a local/self-looping VPN that does not take traffic outside the device. - -## More on Privacy - -[More information about Privacy](https://aka.ms/mdatpiosmainprivacystatement) - - - diff --git a/windows/security/threat-protection/microsoft-defender-atp/ios-privacy.md b/windows/security/threat-protection/microsoft-defender-atp/ios-privacy.md index 4a18d89818..1bef25da5f 100644 --- a/windows/security/threat-protection/microsoft-defender-atp/ios-privacy.md +++ b/windows/security/threat-protection/microsoft-defender-atp/ios-privacy.md @@ -52,7 +52,7 @@ Required data consists of data that is necessary to make Microsoft Defender ATP - Azure Active Directory (AD) Device ID and Azure User ID: Uniquely identifies the device, User respectively at Azure Active directory. - Azure tenant ID - GUID that identifies your organization within Azure Active Directory - Microsoft Defender ATP org ID - Unique identifier associated with the enterprise that the device belongs to. Allows Microsoft to identify whether issues are impacting a select set of enterprises and how many enterprises are impacted - - User Principal Name Email ID of the user + - User Principal Name - Email ID of the user ### Product and service usage data @@ -72,7 +72,7 @@ Optional diagnostic data includes: **Feedback Data** is collected through in-app feedback provided by the user. -- The users email address, if they choose to provide it +- The user's email address, if they choose to provide it - Feedback type (smile, frown, idea) and any feedback comments submitted by the user [More on Privacy](https://aka.ms/mdatpiosprivacystatement) \ No newline at end of file diff --git a/windows/security/threat-protection/microsoft-defender-atp/pull-alerts-using-rest-api.md b/windows/security/threat-protection/microsoft-defender-atp/pull-alerts-using-rest-api.md index 38400901cd..078b9f44ba 100644 --- a/windows/security/threat-protection/microsoft-defender-atp/pull-alerts-using-rest-api.md +++ b/windows/security/threat-protection/microsoft-defender-atp/pull-alerts-using-rest-api.md @@ -71,7 +71,7 @@ You'll use the access token to access the protected resource, which are detectio To get an access token, you'll need to do a POST request to the token issuing endpoint. Here is a sample request: -```syntax +```http POST /72f988bf-86f1-41af-91ab-2d7cd011db47/oauth2/token HTTP/1.1 Host: login.microsoftonline.com @@ -124,14 +124,14 @@ CloudCreatedMachineTags | string | Device tags that were created in Microsoft De ### Request example The following example demonstrates how to retrieve all the detections in your organization. -```syntax +```http GET https://wdatp-alertexporter-eu.windows.com/api/alerts Authorization: Bearer