endpoint config manager onboarding content

windows/security/threat-protection/TOC.md

@@ -19,6 +19,9 @@
 ### [Phase 1: Prepare](microsoft-defender-atp/prepare-deployment.md)
 ### [Phase 2: Set up](microsoft-defender-atp/production-deployment.md)
 ### [Phase 3: Onboard](microsoft-defender-atp/onboarding.md)
+#### [Onboarding using Microsoft Endpoint Configuration Manager]microsoft-defender-atp/onboarding-endpoint-configuration-manager.md)
+#### [Onboarding using Microsoft Endpoint Manager]microsoft-defender-atp/onboarding-endpoint-manager.md)
+
 
 ## [Migration guides]()
 ### [Migrate from Symantec to Microsoft Defender ATP]()

windows/security/threat-protection/microsoft-defender-atp/onboarding-endpoint-configuration-manager.md

@@ -0,0 +1,355 @@
+---
+title: Onboarding using Microsoft Endpoint Configuration Manager 
+description: Learn how to onboard to Microsoft Defender ATP using Microsoft Endpoint Configuration Manager
+keywords: onboarding, configuration, deploy, deployment, endpoint configuration manager, mdatp, advanced threat protection, collection creation, endpoint detection response, next generation protection, attack surface reduction
+search.product: eADQiWindows 10XVcnh
+ms.prod: w10
+ms.mktglfcycl: deploy
+ms.sitesec: library
+ms.pagetype: security
+ms.author: macapara
+author: mjcaparas
+ms.localizationpriority: medium
+manager: dansimp
+audience: ITPro
+ms.collection: 
+- M365-security-compliance
+- m365solution-endpointprotect  
+ms.topic: article
+---
+
+# Onboarding using Microsoft Endpoint Configuration Manager 
+**Applies to:**
+- [Microsoft Defender Advanced Threat Protection (Microsoft Defender ATP)](https://go.microsoft.com/fwlink/p/?linkid=2069559)
+
+## Collection creation
+To onboard Windows 10 devices with Microsoft Endpoint Configuration Manager, the
+deployment can target either and existing collection or a new collection can be
+created for testing. The onboarding like group policy or manual method does
+not install any agent on the system. Within the Configuration Manager console
+the onboarding process will be configured as part of the compliance settings
+within the console. Any system that receives this required configuration will
+maintain that configuration for as long as the Configuration Manager client
+continues to receive this policy from the management point. Follow the steps
+below to onboard systems with Configuration Manager.
+
+1. In Microsoft Endpoint Configuration Manager console, navigate to **Assets and Compliance \> Overview \> Device Collections**.            
+
+    ![Image of Microsoft Endpoint Configuration Manager wizard](images/configmgr-device-collections.png)
+
+2. Right Click **Device Collection** and select **Create Device Collection**.
+
+    ![Image of Microsoft Endpoint Configuration Manager wizard](images/configmgr-create-device-collection.png)
+
+3. Provide a **Name** and **Limiting Collection**, then select **Next**.
+
+    ![Image of Microsoft Endpoint Configuration Manager wizard](images/configmgr-limiting-collection.png)
+
+4. Select **Add Rule** and choose **Query Rule**.
+
+    ![Image of Microsoft Endpoint Configuration Manager wizard](images/configmgr-query-rule.png)
+
+5.  Click **Next** on the **Direct Membership Wizard** and click on **Edit Query Statement**.
+
+     ![Image of Microsoft Endpoint Configuration Manager wizard](images/configmgr-direct-membership.png)
+
+6. Select **Criteria** and then choose the star icon.
+
+     ![Image of Microsoft Endpoint Configuration Manager wizard](images/configmgr-criteria.png)
+
+7. Keep criterion type as **simple value**, choose where as **Operating System - build number**, operator as **is greater than or equal to** and value **14393** and click on **OK**.
+
+    ![Image of Microsoft Endpoint Configuration Manager wizard](images/configmgr-simple-value.png)
+
+8. Select **Next** and **Close**.
+
+    ![Image of Microsoft Endpoint Configuration Manager wizard](images/configmgr-membership-rules.png)
+
+9. Select **Next**.
+
+    ![Image of Microsoft Endpoint Configuration Manager wizard](images/configmgr-confirm.png)
+
+After completing this task, you now have a device collection with all the Windows 10 endpoints in the environment. 
+
+## Endpoint detection and response
+### Windows 10
+From within the Microsoft Defender Security Center it is possible to download
+the '.onboarding' policy that can be used to create the policy in System Center Configuration
+Manager and deploy that policy to Windows 10 devices.
+
+1. From a Microsoft Defender Security Center Portal, select [Settings and then Onboarding](https://securitycenter.windows.com/preferences2/onboarding).
+
+
+
+2. Under Deployment method select the supported version of **Microsoft Endpoint Configuration Manager**.
+
+    ![Image of Microsoft Defender ATP onboarding wizard](images/mdatp-onboarding-wizard.png)
+
+3. Select **Download package**.
+
+    ![Image of Microsoft Defender ATP onboarding wizard](images/mdatp-download-package.png)
+
+4. Save the package to an accessible location.
+5. In  Microsoft Endpoint Configuration Manager, navigate to: **Assets and Compliance > Overview > Endpoint Protection > Microsoft Defender ATP Policies**.
+
+6. Right-click **Microsoft Defender ATP Policies** and select **Create Microsoft Defender ATP Policy**.
+
+    ![Image of Microsoft Endpoint Configuration Manager wizard](images/configmgr-create-policy.png)
+
+7. Enter the name and description, verify **Onboarding** is selected, then select **Next**.
+
+    ![Image of Microsoft Endpoint Configuration Manager wizard](images/configmgr-policy-name.png)
+
+8. Click **Browse**.
+
+9. Navigate to the location of the downloaded file from step 4 above.
+
+10. Click **Next**.
+11. Configure the Agent with the appropriate samples (**None** or **All file types**).
+
+    ![Image of configuration settings](images/configmgr-config-settings.png)
+
+12. Select the appropriate telemetry (**Normal** or **Expedited**) then click **Next**.
+
+    ![Image of configuration settings](images/configmgr-telemetry.png)
+
+14. Verify the configuration, then click **Next**.
+
+     ![Image of configuration settings](images/configmgr-verify-configuration.png)
+
+15. Click **Close** when the Wizard completes.
+
+16.  In the Microsoft Endpoint Configuration Manager console, right-click the Microsoft Defender ATP policy you just created and select **Deploy**.
+
+     ![Image of configuration settings](images/configmgr-deploy.png)
+
+17. On the right panel, select the previously created collection and click **OK**.
+
+    ![Image of configuration settings](images/configmgr-select-collection.png)
+
+
+### Previous versions of Windows Client (Windows 7 and Windows 8.1)
+Follow the steps below to identify the Microsoft Defender ATP Workspace ID and Workspace Key, that will be required for the onboarding of previous versions of Windows.
+
+1. From a Microsoft Defender Security Center Portal, select **Settings > Onboarding**.
+
+2. Under operating system choose **Windows 7 SP1 and 8.1**.
+
+3. Copy the **Workspace ID** and **Workspace Key** and save them. They will be used later in the process.
+
+    ![Image of onboarding](images/91b738e4b97c4272fd6d438d8c2d5269.png)
+
+4. Install the Microsoft Monitoring Agent (MMA). <br>
+    MMA is currently (as of January 2019) supported on the following Windows Operating
+    Systems:
+
+    -   Server SKUs: Windows Server 2008 SP1 or Newer
+
+    -   Client SKUs: Windows 7 SP1 and later
+
+    The MMA agent will need to be installed on Windows devices. To install the
+    agent, some systems will need to download the [Update for customer experience
+    and diagnostic
+    telemetry](https://support.microsoft.com/help/3080149/update-for-customer-experience-and-diagnostic-telemetry)
+    in order to collect the data with MMA. These system versions include but may not
+    be limited to:
+
+    -   Windows 8.1
+
+    -   Windows 7
+
+    -   Windows Server 2016
+
+    -   Windows Server 2012 R2
+
+    -   Windows Server 2008 R2
+
+    Specifically, for Windows 7 SP1, the following patches must be installed:
+
+    -   Install
+        [KB4074598](https://support.microsoft.com/help/4074598/windows-7-update-kb4074598)
+
+    -   Install either [.NET Framework
+        4.5](https://www.microsoft.com/en-us/download/details.aspx?id=30653) (or
+        later) **or**
+        [KB3154518](https://support.microsoft.com/help/3154518/support-for-tls-system-default-versions-included-in-the-net-framework).
+        Do not install both on the same system.
+
+5. If you're using a proxy to connect to the Internet see the Configure proxy settings section.
+
+Once completed, you should see onboarded endpoints in the portal within an hour.
+
+## Next generation protection 
+Microsoft Defender Antivirus is a built-in antimalware solution that provides next generation protection for desktops, portable computers, and servers.
+
+1. In the Microsoft Endpoint Configuration Manager console, navigate to **Assets and Compliance \> Overview \> Endpoint Protection \> Antimalware Polices** and choose **Create Antimalware Policy**.
+
+    ![Image of antimalware policy](images/9736e0358e86bc778ce1bd4c516adb8b.png)
+
+2. Select **Scheduled scans**, **Scan settings**, **Default actions**, **Real-time protection**, **Exclusion settings**, **Advanced**, **Threat overrides**, **Cloud Protection Service** and **Security intelligence   updates** and choose **OK**.
+
+    ![Image of next generation protection pane](images/1566ad81bae3d714cc9e0d47575a8cbd.png)
+
+    In certain industries or some select enterprise customers might have specific
+needs on how Antivirus is configured.
+
+  
+    [Quick scan versus full scan and custom scan](https://docs.microsoft.com/windows/security/threat-protection/microsoft-defender-antivirus/scheduled-catch-up-scans-microsoft-defender-antivirus#quick-scan-versus-full-scan-and-custom-scan)
+
+    For more details, see [Windows Security configuration framework](https://docs.microsoft.com/windows/security/threat-protection/windows-security-configuration-framework/windows-security-configuration-framework)
+  
+    
+    ![Image of next generation protection pane](images/cd7daeb392ad5a36f2d3a15d650f1e96.png)
+
+    ![Image of next generation protection pane](images/36c7c2ed737f2f4b54918a4f20791d4b.png)
+
+    ![Image of next generation protection pane](images/a28afc02c1940d5220b233640364970c.png)
+
+    ![Image of next generation protection pane](images/5420a8790c550f39f189830775a6d4c9.png)
+
+    ![Image of next generation protection pane](images/33f08a38f2f4dd12a364f8eac95e8c6b.png)
+
+    ![Image of next generation protection pane](images/41b9a023bc96364062c2041a8f5c344e.png)
+
+    ![Image of next generation protection pane](images/945c9c5d66797037c3caeaa5c19f135c.png)
+
+    ![Image of next generation protection pane](images/3876ca687391bfc0ce215d221c683970.png)
+
+3. Right-click on the newly created antimalware policy and select **Deploy**.
+
+    ![Image of next generation protection pane](images/f5508317cd8c7870627cb4726acd5f3d.png)
+
+4. Target the new antimalware policy to your Windows 10 collection and click **OK**.
+
+     ![Image of next generation protection pane](images/configmgr-select-collection.png)
+
+After completing this task, you now have successfully configured Windows
+Defender Antivirus.
+
+## Attack surface reduction
+The attack surface reduction pillar of Microsoft Defender ATP includes the feature set that is available under Exploit Guard. Attack surface reduction (ASR) rules, Controlled Folder Access, Network Protection and Exploit
+Protection. 
+
+All these features provide an audit mode and a block mode. In audit mode there is no end-user impact. All it does is collect additional telemetry and make it available in the Microsoft Defender Security Center. The goal with a deployment is to step-by-step move security controls into block mode.
+
+To set ASR rules in Audit mode:
+
+1. In the Microsoft Endpoint Configuration Manager console, navigate to **Assets and Compliance \> Overview \> Endpoint Protection \> Windows Defender Exploit Guard** and choose **Create Exploit Guard Policy**.
+
+   ![Image of Microsoft Endpoint Configuration Manager console](images/728c10ef26042bbdbcd270b6343f1a8a.png)
+
+
+2.  Select **Attack Surface Reduction**.
+   
+
+3. Set rules to **Audit** and click **Next**.
+
+    ![Image of Microsoft Endpoint Configuration Manager console](images/d18e40c9e60aecf1f9a93065cb7567bd.png)
+
+4. Confirm the new Exploit Guard policy by clicking on **Next**.
+
+    ![Image of Microsoft Endpoint Configuration Manager console](images/0a6536f2c4024c08709cac8fcf800060.png)
+
+    
+5. Once the policy is created click **Close**.
+
+    ![Image of Microsoft Endpoint Configuration Manager console](images/95d23a07c2c8bc79176788f28cef7557.png)
+
+    
+
+6.  Right-click on the newly created policy and choose **Deploy**.
+    
+    ![Image of Microsoft Endpoint Configuration Manager console](images/8999dd697e3b495c04eb911f8b68a1ef.png)
+
+7. Target the policy to the newly created Windows 10 collection and click **OK**.
+
+    ![Image of Microsoft Endpoint Configuration Manager console](images/0ccfe3e803be4b56c668b220b51da7f7.png)
+
+After completing this task, you now have successfully configured ASR rules in audit mode.  
+  
+Below are additional steps to verify whether ASR rules are correctly applied to
+endpoints. (This may take few minutes)
+
+
+1. From a web browser, navigate to <https://securitycenter.windows.com>.
+
+2.  Select **Configuration management** from left side menu.
+
+3. Click **Go to attack surface management** in the Attack surface management panel. 
+    
+    ![Image of attack surface management](images/security-center-attack-surface-mgnt-tile.png)
+
+4. Click **Configuration** tab in Attack surface reduction rules reports. It shows ASR rules configuration overview and ASR rules status on each devices.
+
+    ![A screenshot of attack surface reduction rules reports](images/f91f406e6e0aae197a947d3b0e8b2d0d.png)
+
+5. Click each device shows configuration details of ASR rules.
+
+    ![A screenshot of attack surface reduction rules reports](images/24bfb16ed561cbb468bd8ce51130ca9d.png)
+
+See [Optimize ASR rule deployment and
+detections](https://docs.microsoft.com/windows/security/threat-protection/microsoft-defender-atp/configure-machines-asr)   for more details.  
+
+
+### To set Network Protection rules in Audit mode:
+1. In the Microsoft Endpoint Configuration Manager console, navigate to **Assets and  Compliance \> Overview \> Endpoint Protection \> Windows Defender Exploit Guard** and choose **Create Exploit Guard Policy**.
+
+    ![A screenshot System Center Configuration Manager](images/728c10ef26042bbdbcd270b6343f1a8a.png)
+
+2. Select **Network protection**.
+
+3. Set the setting to **Audit** and click **Next**. 
+
+    ![A screenshot System Center Confirugatiom Manager](images/c039b2e05dba1ade6fb4512456380c9f.png)
+
+4. Confirm the new Exploit Guard Policy by clicking **Next**.
+    
+    ![A screenshot Exploit GUard policy](images/0a6536f2c4024c08709cac8fcf800060.png)
+
+5. Once the policy is created click on **Close**.
+
+    ![A screenshot Exploit GUard policy](images/95d23a07c2c8bc79176788f28cef7557.png)
+
+6. Right-click on the newly created policy and choose **Deploy**.
+
+    ![A screenshot Microsoft Endpoint Configuration Manager ](images/8999dd697e3b495c04eb911f8b68a1ef.png)
+
+7. Select the policy to the newly created Windows 10 collection and choose **OK**.
+
+    ![A screenshot Microsoft Endpoint Configuration Manager ](images/0ccfe3e803be4b56c668b220b51da7f7.png)
+
+After completing this task, you now have successfully configured Network
+Protection in audit mode.
+
+### To set Controlled Folder Access rules in Audit mode:
+
+1. In the Microsoft Endpoint Configuration Manager console, navigate to **Assets and Compliance \> Overview \> Endpoint Protection \> Windows Defender Exploit Guard** and choose **Create Exploit Guard Policy**.
+
+    ![A screenshot of Microsoft Endpoint Configuration Manager ](images/728c10ef26042bbdbcd270b6343f1a8a.png)
+
+2. Select **Controlled folder access**.
+    
+3. Set the configuration to **Audit** and click **Next**.
+
+    ![A screenshot of Microsoft Endpoint Configuration Manager ](images/a8b934dab2dbba289cf64fe30e0e8aa4.png)    
+    
+4. Confirm the new Exploit Guard Policy by clicking on **Next**.
+
+    ![A screenshot of Microsoft Endpoint Configuration Manager ](images/0a6536f2c4024c08709cac8fcf800060.png)
+
+5. Once the policy is created click on **Close**.
+
+    ![A screenshot of Microsoft Endpoint Configuration Manager ](images/95d23a07c2c8bc79176788f28cef7557.png)
+
+6. Right-click on the newly created policy and choose **Deploy**.
+
+    ![A screenshot of Microsoft Endpoint Configuration Manager ](images/8999dd697e3b495c04eb911f8b68a1ef.png)
+
+7.  Target the policy to the newly created Windows 10 collection and click **OK**.
+
+    ![A screenshot of Microsoft Endpoint Configuration Manager ](images/0ccfe3e803be4b56c668b220b51da7f7.png)
+
+You have now successfully configured Controlled folder access in audit mode.
+
+## Related topic
+- [Onboarding using Microsoft Endpoint Manager](onboarding-endpoint-manager.md)

windows/security/threat-protection/microsoft-defender-atp/onboarding-endpoint-manager.md

@@ -0,0 +1,387 @@
+---
+title: Onboarding using Microsoft Endpoint Manager 
+description: Learn how to onboard to Microsoft Defender ATP using Microsoft Endpoint  Manager
+keywords: onboarding, configuration, deploy, deployment, endpoint manager, mdatp, advanced threat protection, collection creation, endpoint detection response, next generation protection, attack surface reduction
+search.product: eADQiWindows 10XVcnh
+ms.prod: w10
+ms.mktglfcycl: deploy
+ms.sitesec: library
+ms.pagetype: security
+ms.author: macapara
+author: mjcaparas
+ms.localizationpriority: medium
+manager: dansimp
+audience: ITPro
+ms.collection: 
+- M365-security-compliance
+- m365solution-endpointprotect  
+ms.topic: article
+---
+
+# Onboarding using Microsoft Endpoint Manager 
+**Applies to:**
+- [Microsoft Defender Advanced Threat Protection (Microsoft Defender ATP)](https://go.microsoft.com/fwlink/p/?linkid=2069559)
+
+
+In this section we will be using Microsoft Endpoint Manager (MEM) to deploy
+Microsoft Defender ATP to your endpoints.
+
+For more information about MEM, see:
+- [Microsoft Entpoint Manager page](https://docs.microsoft.com/en-us/mem/)
+- The [blog post on convergence of Intune and ConfigMgr](https://www.microsoft.com/microsoft-365/blog/2019/11/04/use-the-power-of-cloud-intelligence-to-simplify-and-accelerate-it-and-the-move-to-a-modern-workplace/)
+- [Introduction video on MEM](https://www.microsoft.com/microsoft-365/blog/2019/11/04/use-the-power-of-cloud-intelligence-to-simplify-and-accelerate-it-and-the-move-to-a-modern-workplace)
+
+
+This process is a multi-step process, you'll need to:
+
+-   Identify target devices or users
+
+    -   Create an AAD group (User or Device)
+
+-   Create a Configuration Profile
+
+    -   In MEM we'll guide you in creating a separate policy for each feature
+
+Resources
+---------
+
+Here are the links you'll need for the rest of the process:
+
+-   [MEM portal](https://aka.ms/memac)
+
+-   [Security Center](https://securitycenter.windows.com/)
+
+-   [Intune Security baselines](https://docs.microsoft.com/en-us/mem/intune/protect/security-baseline-settings-defender-atp#microsoft-defender)
+
+## Idenfity target devices or users
+In this section we will create a testing group to assign your configurations.
+
+>[!NOTE]
+>Intune uses Azure Active Directory (Azure AD) groups to manage devices and
+users. As an Intune admin, you can set up groups to suit your organizational
+needs.<br>
+> For more information, see [Add groups to organize users and devices](https://docs.microsoft.com/en-us/mem/intune/fundamentals/groups-add).
+
+### Group creation
+
+1.  Open the MEM portal.
+
+2.  Open **Groups > New Group**.
+
+    ![Image of Microsoft Endpoint Manager portal](images/66f724598d9c3319cba27f79dd4617a4.png)
+
+3.  Enter details and create a new group.
+
+    ![Image of Microsoft Endpoint Manager portal](images/b1e0206d675ad07db218b63cd9b9abc3.png)
+
+4.  Add your test user / device
+
+    >[!NOTE]
+    >Azure Active Directory groups can contain users or devices, not combinations of both.
+
+5.  From the **Groups > All groups** pane, open your new group.
+
+6.  Click on **Members > Add members**.
+
+7.  Find your test user/device and select it.
+
+    ![](images/149cbfdf221cdbde8159d0ab72644cd0.png)
+
+8.  Your testing group now has a member to test.
+
+Create a Configuration Policy
+-----------------------------
+
+In the following section, you will create a number of configuration policies.
+First is a configuration policy to select which groups of users or devices will
+be onboarded to Defender ATP. Then you will continue by creating several
+different types of Endpoint Security policies.
+
+### Endpoint Detection and Response
+
+1.  Open the MEM portal
+
+2.  Navigate to Endpoint security > Endpoint detection and response > Click
+    on Create Profile
+
+    ![](images/58dcd48811147feb4ddc17212b7fe840.png)
+
+3.  Under Platform, select Windows 10 and Later, Profile - Endpoint detection
+    and response > Create
+
+4.  Enter name and description > Next
+
+    ![](images/a5b2d23bdd50b160fef4afd25dda28d4.png)
+
+5.  Select settings as required > Next
+
+    ![](images/cea7e288b5d42a9baf1aef0754ade910.png)
+
+    NOTE: this has been auto populated as I have integrated MDATP and Intune as
+    per this
+    [section](https://docs.microsoft.com/en-us/mem/intune/protect/advanced-threat-protection#enable-microsoft-defender-atp-in-intune).
+    If you have not integrated MDATP and Intune, complete [these
+    steps](https://docs.microsoft.com/en-us/windows/security/threat-protection/microsoft-defender-atp/configure-endpoints-mdm#onboard-machines-using-microsoft-intune)
+    to create and upload an onboarding blob.
+
+    ![](images/2466460812371ffae2d19a10c347d6f4.png)
+
+6.  Add scope tags if required > Next
+
+    ![](images/ef844f52ec2c0d737ce793f68b5e8408.png)
+
+7.  Add test group by clicking on Select groups to include and choose your group
+    > Next
+
+    ![](images/fc3525e20752da026ec9f46ab4fec64f.png)
+
+8.  Review and accept > Create
+
+    ![](images/289172dbd7bd34d55d24810d9d4d8158.png)
+
+9.  You can view your completed policy here
+
+    ![](images/5a568b6878be8243ea2b9d82d41ed297.png)
+
+### Antivirus
+
+1.  Open the MEM portal
+
+2.  Navigate to Endpoint security > Antivirus > Click on Create Policy
+
+    ![](images/6b728d6e0d71108d768e368b416ff8ba.png)
+
+3.  Select Platform - Windows 10 and Later - Windows and Profile – Microsoft
+    Defender Antivirus > Create
+
+4.  Enter Name and Description - \> Next
+
+    ![](images/a7d738dd4509d65407b7d12beaa3e917.png)
+
+5.  In the Configuration settings page: Set the configurations you require for
+    Microsoft Defender Antivirus (Cloud Protection, Exclusions, Real Time
+    Protection, and Remediation).
+
+    ![](images/3840b1576d6f79a1d72eb14760ef5e8c.png)
+
+6.  Add scope tags if required> Next
+
+    ![](images/2055e4f9b9141525c0eb681e7ba19381.png)
+
+7.  Select groups to include, assign to your test group > Next
+
+    ![](images/48318a51adee06bff3908e8ad4944dc9.png)
+
+8.  Review and create > create
+
+    ![](images/dfdadab79112d61bd3693d957084b0ec.png)
+
+9.  You can see the configuration policy you created as per below
+
+    ![](images/38180219e632d6e4ec7bd25a46398da8.png)
+
+### Attack Surface Reduction – Attack surface reduction rules
+
+1.  Open the MEM portal
+
+2.  Navigate to Endpoint security > Attack surface reduction
+
+3.  Click on Create Policy
+
+4.  NOTE: I will be setting these as audit
+
+5.  Select Platform - Windows 10 and Later – Profile - Attack surface reduction
+    rules > Create
+
+    ![](images/522d9bb4288dc9c1a957392b51384fdd.png)
+
+6.  Enter Name and Description > Next
+
+    ![](images/a5a71fd73ec389f3cdce6d1a6bd1ff31.png)
+
+7.  In the Configuration settings page: Set the configurations you require for
+    Attack surface reduction rules > Next
+
+    NOTE: I am configuring all of my Attack surface reduction rules to Audit.
+
+    Details on Attack surface reduction rules:
+    <https://docs.microsoft.com/en-us/windows/security/threat-protection/microsoft-defender-atp/attack-surface-reduction>
+
+    ![](images/dd0c00efe615a64a4a368f54257777d0.png)
+
+8.  Add Scope Tags as required > Next
+
+    ![](images/6daa8d347c98fe94a0d9c22797ff6f28.png)
+
+9.  Select groups to include and assign to test group > Next
+
+    ![](images/45cefc8e4e474321b4d47b4626346597.png)
+
+10. Review and Create - \> Create
+
+    ![](images/2c2e87c5fedc87eba17be0cdeffdb17f.png)
+
+11. You can View the policy
+
+![](images/7a631d17cc42500dacad4e995823ffef.png)
+
+### Attack Surface Reduction – Web Protection
+
+1.  Open the MEM portal
+
+2.  Navigate to Endpoint security > Attack surface reduction
+
+3.  Click on Create Policy
+
+4.  Select Windows 10 and Later – Web protection > Create
+
+    ![](images/cd7b5a1cbc16cc05f878cdc99ba4c27f.png)
+
+5.  Enter Name and Description > Next
+
+    ![](images/5be573a60cd4fa56a86a6668b62dd808.png)
+
+6.  In the Configuration settings page: Set the configurations you require for
+    Web Protection> Next
+
+    NOTE: I am configuring Web Protection to Block.
+
+    Details on Web Protection:
+    <https://docs.microsoft.com/en-us/windows/security/threat-protection/microsoft-defender-atp/web-protection-overview>
+
+    ![](images/6104aa33a56fab750cf30ecabef9f5b6.png)
+
+7.  Add Scope Tags as required > Next
+
+    ![](images/6daa8d347c98fe94a0d9c22797ff6f28.png)
+
+8.  Assign to test group > Next
+
+    ![](images/45cefc8e4e474321b4d47b4626346597.png)
+
+9.  Review and Create - \> Create
+
+    ![](images/8ee0405f1a96c23d2eb6f737f11c1ae5.png)
+
+10. You can View the policy
+
+    ![](images/e74f6f6c150d017a286e6ed3dffb7757.png)
+
+Validate
+========
+
+Confirm Policies have applied
+-----------------------------
+
+Once the Configuration policy has been assigned it will take some time to apply.
+
+You can see the timing for Intune at this link:
+
+<https://docs.microsoft.com/en-us/mem/intune/configuration/device-profile-troubleshoot#how-long-does-it-take-for-devices-to-get-a-policy-profile-or-app-after-they-are-assigned>
+
+To confirm that the configuration policy have been applied to your test device
+follow the below process for each Configuration policy.
+
+1.  Open the MEM portal and navigate to the relevant policy as shown in the
+    steps above. I will use Antivirus for this example
+
+    ![](images/43ab6aa74471ee2977e154a4a5ef2d39.png)
+
+2.  Click on the Configuration Policy to view the policy status
+
+    ![](images/55ecaca0e4a022f0e29d45aeed724e6c.png)
+
+3.  Click on “Device Status” to see the per device status
+
+    ![](images/18a50df62cc38749000dbfb48e9a4c9b.png)
+
+4.  Click on “User Status” to see the per user status
+
+    ![](images/4e965749ff71178af8873bc91f9fe525.png)
+
+5.  Click on “Per-setting status” to see the Per-setting status
+
+    Note: This View is very useful to identify any settings that conflict with
+    another policy
+
+    ![](images/42acc69d0128ed09804010bdbdf0a43c.png)
+
+Endpoint Detection and Response
+-------------------------------
+
+1.  Before applying the configuration, the Windows Defender Advanced Threat
+    Protection Service should not be started.
+
+    ![](images/b418a232a12b3d0a65fc98248dbb0e31.png)
+
+2.  After the config has been applied the Windows Defender Advanced Threat
+    Protection Service should be started
+
+    ![](images/a621b699899f1b41db211170074ea59e.png)
+
+3.  After the services is running on the device, the device appears in Microsoft
+    Defender Security Center
+
+    ![](images/df0c64001b9219cfbd10f8f81a273190.png)
+
+Antivirus
+---------
+
+1.  Before applying the policy on a test device, you should be able to manually
+    manage the settings as per below.
+
+![](images/88efb4c3710493a53f2840c3eac3e3d3.png)
+
+1.  After the policy has been applied, you should not be able to manually manage
+    the settings as per below.
+
+    NOTE: In the below image “**Turn on cloud-delivered protection”** and
+    **“Turn on real-time protection”** are being shown as managed.
+
+![](images/9341428b2d3164ca63d7d4eaa5cff642.png)
+
+Attack Surface Reduction – Attack surface reduction rules
+---------------------------------------------------------
+
+1.  Before applying the policy on A test device
+
+2.  Open a PowerShell Window and type “Get-MpPreference”
+
+3.  This should respond with the following lines with no content
+
+    1.  AttackSurfaceReductionOnlyExclusions :
+
+    2.  AttackSurfaceReductionRules_Actions :
+
+    3.  AttackSurfaceReductionRules_Ids :
+
+![](images/cb0260d4b2636814e37eee427211fe71.png)
+
+1.  After applying the policy on A test device
+
+2.  Open a PowerShell Windows and type “Get-MpPreference”
+
+3.  This should respond with the following lines with content as shown below
+
+    ![](images/619fb877791b1fc8bc7dfae1a579043d.png)
+
+Attack Surface Reduction – Web Protection
+-----------------------------------------
+
+1.  On the test device
+
+2.  Open a PowerShell Windows and type
+    “(Get-MpPreference).EnableNetworkProtection”
+
+3.  This should respond with a “0” as shown below
+
+    ![](images/196a8e194ac99d84221f405d0f684f8c.png)
+
+4.  After Applying the Policy
+
+5.  Open a PowerShell Windows and type
+    “(Get-MpPreference).EnableNetworkProtection”
+
+6.  This should respond with a “1” as shown below
+
+![](images/c06fa3bbc2f70d59dfe1e106cd9a4683.png)

windows/security/threat-protection/microsoft-defender-atp/onboarding.md

@@ -51,343 +51,21 @@ You are currently in the onboarding phase.
 
 
 
-To deploy Microsoft Defender ATP, you'll need to onboard devices to the service. Depending on the architecture of your environment, you'll need to use the appropriate management tool that best suites your requirements. 
+To deploy Microsoft Defender ATP, you'll need to onboard devices to the service.
 
-The deployment guide uses Microsoft Endpoint Configuration Manager as the management tool to demonstrate an end-to-end deployment. 
+Depending on the architecture of your environment, you'll need to use the appropriate management tool that best suites your requirements. 
 
-This article will guide you on:
-- Setting up Microsoft Endpoint Configuration Manager 
+After onboarding the devices, you'll then configure the various capabilities such as endpoint detection and response, next-generation protection, and attack surface reduction. 
+
+
+This article provides resources to guide you on:
+- Using various management tools to onboard devices
+    - [Onboarding using Microsoft Endpoint Configuration Manager](onboarding-endpoint-configuraiton-manager.md)
+    - [Onboarding using Microsoft Endpoint Manager](onboarding-endpoint-manager.md)
 - Endpoint detection and response configuration
 - Next-generation protection configuration
 - Attack surface reduction configuration
 
-## Onboarding using Microsoft Endpoint Configuration Manager 
-### Collection creation
-To onboard Windows 10 devices with Microsoft Endpoint Configuration Manager, the
-deployment can target either and existing collection or a new collection can be
-created for testing. The onboarding like group policy or manual method does
-not install any agent on the system. Within the Configuration Manager console
-the onboarding process will be configured as part of the compliance settings
-within the console. Any system that receives this required configuration will
-maintain that configuration for as long as the Configuration Manager client
-continues to receive this policy from the management point. Follow the steps
-below to onboard systems with Configuration Manager.
-
-1. In Microsoft Endpoint Configuration Manager console, navigate to **Assets and Compliance \> Overview \> Device Collections**.            
-
-    ![Image of Microsoft Endpoint Configuration Manager wizard](images/configmgr-device-collections.png)
-
-2. Right Click **Device Collection** and select **Create Device Collection**.
-
-    ![Image of Microsoft Endpoint Configuration Manager wizard](images/configmgr-create-device-collection.png)
-
-3. Provide a **Name** and **Limiting Collection**, then select **Next**.
-
-    ![Image of Microsoft Endpoint Configuration Manager wizard](images/configmgr-limiting-collection.png)
-
-4. Select **Add Rule** and choose **Query Rule**.
-
-    ![Image of Microsoft Endpoint Configuration Manager wizard](images/configmgr-query-rule.png)
-
-5.  Click **Next** on the **Direct Membership Wizard** and click on **Edit Query Statement**.
-
-     ![Image of Microsoft Endpoint Configuration Manager wizard](images/configmgr-direct-membership.png)
-
-6. Select **Criteria** and then choose the star icon.
-
-     ![Image of Microsoft Endpoint Configuration Manager wizard](images/configmgr-criteria.png)
-
-7. Keep criterion type as **simple value**, choose where as **Operating System - build number**, operator as **is greater than or equal to** and value **14393** and click on **OK**.
-
-    ![Image of Microsoft Endpoint Configuration Manager wizard](images/configmgr-simple-value.png)
-
-8. Select **Next** and **Close**.
-
-    ![Image of Microsoft Endpoint Configuration Manager wizard](images/configmgr-membership-rules.png)
-
-9. Select **Next**.
-
-    ![Image of Microsoft Endpoint Configuration Manager wizard](images/configmgr-confirm.png)
-
-After completing this task, you now have a device collection with all the Windows 10 endpoints in the environment. 
-
-## Endpoint detection and response
-### Windows 10
-From within the Microsoft Defender Security Center it is possible to download
-the '.onboarding' policy that can be used to create the policy in System Center Configuration
-Manager and deploy that policy to Windows 10 devices.
-
-1. From a Microsoft Defender Security Center Portal, select [Settings and then Onboarding](https://securitycenter.windows.com/preferences2/onboarding).
-
-
-
-2. Under Deployment method select the supported version of **Microsoft Endpoint Configuration Manager**.
-
-    ![Image of Microsoft Defender ATP onboarding wizard](images/mdatp-onboarding-wizard.png)
-
-3. Select **Download package**.
-
-    ![Image of Microsoft Defender ATP onboarding wizard](images/mdatp-download-package.png)
-
-4. Save the package to an accessible location.
-5. In  Microsoft Endpoint Configuration Manager, navigate to: **Assets and Compliance > Overview > Endpoint Protection > Microsoft Defender ATP Policies**.
-
-6. Right-click **Microsoft Defender ATP Policies** and select **Create Microsoft Defender ATP Policy**.
-
-    ![Image of Microsoft Endpoint Configuration Manager wizard](images/configmgr-create-policy.png)
-
-7. Enter the name and description, verify **Onboarding** is selected, then select **Next**.
-
-    ![Image of Microsoft Endpoint Configuration Manager wizard](images/configmgr-policy-name.png)
-
-8. Click **Browse**.
-
-9. Navigate to the location of the downloaded file from step 4 above.
-
-10. Click **Next**.
-11. Configure the Agent with the appropriate samples (**None** or **All file types**).
-
-    ![Image of configuration settings](images/configmgr-config-settings.png)
-
-12. Select the appropriate telemetry (**Normal** or **Expedited**) then click **Next**.
-
-    ![Image of configuration settings](images/configmgr-telemetry.png)
-
-14. Verify the configuration, then click **Next**.
-
-     ![Image of configuration settings](images/configmgr-verify-configuration.png)
-
-15. Click **Close** when the Wizard completes.
-
-16.  In the Microsoft Endpoint Configuration Manager console, right-click the Microsoft Defender ATP policy you just created and select **Deploy**.
-
-     ![Image of configuration settings](images/configmgr-deploy.png)
-
-17. On the right panel, select the previously created collection and click **OK**.
-
-    ![Image of configuration settings](images/configmgr-select-collection.png)
-
-
-### Previous versions of Windows Client (Windows 7 and Windows 8.1)
-Follow the steps below to identify the Microsoft Defender ATP Workspace ID and Workspace Key, that will be required for the onboarding of previous versions of Windows.
-
-1. From a Microsoft Defender Security Center Portal, select **Settings > Onboarding**.
-
-2. Under operating system choose **Windows 7 SP1 and 8.1**.
-
-3. Copy the **Workspace ID** and **Workspace Key** and save them. They will be used later in the process.
-
-    ![Image of onboarding](images/91b738e4b97c4272fd6d438d8c2d5269.png)
-
-4. Install the Microsoft Monitoring Agent (MMA). <br>
-    MMA is currently (as of January 2019) supported on the following Windows Operating
-    Systems:
-
-    -   Server SKUs: Windows Server 2008 SP1 or Newer
-
-    -   Client SKUs: Windows 7 SP1 and later
-
-    The MMA agent will need to be installed on Windows devices. To install the
-    agent, some systems will need to download the [Update for customer experience
-    and diagnostic
-    telemetry](https://support.microsoft.com/help/3080149/update-for-customer-experience-and-diagnostic-telemetry)
-    in order to collect the data with MMA. These system versions include but may not
-    be limited to:
-
-    -   Windows 8.1
-
-    -   Windows 7
-
-    -   Windows Server 2016
-
-    -   Windows Server 2012 R2
-
-    -   Windows Server 2008 R2
-
-    Specifically, for Windows 7 SP1, the following patches must be installed:
-
-    -   Install
-        [KB4074598](https://support.microsoft.com/help/4074598/windows-7-update-kb4074598)
-
-    -   Install either [.NET Framework
-        4.5](https://www.microsoft.com/en-us/download/details.aspx?id=30653) (or
-        later) **or**
-        [KB3154518](https://support.microsoft.com/help/3154518/support-for-tls-system-default-versions-included-in-the-net-framework).
-        Do not install both on the same system.
-
-5. If you're using a proxy to connect to the Internet see the Configure proxy settings section.
-
-Once completed, you should see onboarded endpoints in the portal within an hour.
-
-## Next generation protection 
-Microsoft Defender Antivirus is a built-in antimalware solution that provides next generation protection for desktops, portable computers, and servers.
-
-1. In the Microsoft Endpoint Configuration Manager console, navigate to **Assets and Compliance \> Overview \> Endpoint Protection \> Antimalware Polices** and choose **Create Antimalware Policy**.
-
-    ![Image of antimalware policy](images/9736e0358e86bc778ce1bd4c516adb8b.png)
-
-2. Select **Scheduled scans**, **Scan settings**, **Default actions**, **Real-time protection**, **Exclusion settings**, **Advanced**, **Threat overrides**, **Cloud Protection Service** and **Security intelligence   updates** and choose **OK**.
-
-    ![Image of next generation protection pane](images/1566ad81bae3d714cc9e0d47575a8cbd.png)
-
-    In certain industries or some select enterprise customers might have specific
-needs on how Antivirus is configured.
-
-  
-    [Quick scan versus full scan and custom scan](https://docs.microsoft.com/windows/security/threat-protection/microsoft-defender-antivirus/scheduled-catch-up-scans-microsoft-defender-antivirus#quick-scan-versus-full-scan-and-custom-scan)
-
-    For more details, see [Windows Security configuration framework](https://docs.microsoft.com/windows/security/threat-protection/windows-security-configuration-framework/windows-security-configuration-framework)
-  
-    
-    ![Image of next generation protection pane](images/cd7daeb392ad5a36f2d3a15d650f1e96.png)
-
-    ![Image of next generation protection pane](images/36c7c2ed737f2f4b54918a4f20791d4b.png)
-
-    ![Image of next generation protection pane](images/a28afc02c1940d5220b233640364970c.png)
-
-    ![Image of next generation protection pane](images/5420a8790c550f39f189830775a6d4c9.png)
-
-    ![Image of next generation protection pane](images/33f08a38f2f4dd12a364f8eac95e8c6b.png)
-
-    ![Image of next generation protection pane](images/41b9a023bc96364062c2041a8f5c344e.png)
-
-    ![Image of next generation protection pane](images/945c9c5d66797037c3caeaa5c19f135c.png)
-
-    ![Image of next generation protection pane](images/3876ca687391bfc0ce215d221c683970.png)
-
-3. Right-click on the newly created antimalware policy and select **Deploy**.
-
-    ![Image of next generation protection pane](images/f5508317cd8c7870627cb4726acd5f3d.png)
-
-4. Target the new antimalware policy to your Windows 10 collection and click **OK**.
-
-     ![Image of next generation protection pane](images/configmgr-select-collection.png)
-
-After completing this task, you now have successfully configured Windows
-Defender Antivirus.
-
-## Attack surface reduction
-The attack surface reduction pillar of Microsoft Defender ATP includes the feature set that is available under Exploit Guard. Attack surface reduction (ASR) rules, Controlled Folder Access, Network Protection and Exploit
-Protection. 
-
-All these features provide an audit mode and a block mode. In audit mode there is no end-user impact. All it does is collect additional telemetry and make it available in the Microsoft Defender Security Center. The goal with a deployment is to step-by-step move security controls into block mode.
-
-To set ASR rules in Audit mode:
-
-1. In the Microsoft Endpoint Configuration Manager console, navigate to **Assets and Compliance \> Overview \> Endpoint Protection \> Windows Defender Exploit Guard** and choose **Create Exploit Guard Policy**.
-
-   ![Image of Microsoft Endpoint Configuration Manager console](images/728c10ef26042bbdbcd270b6343f1a8a.png)
-
-
-2.  Select **Attack Surface Reduction**.
-   
-
-3. Set rules to **Audit** and click **Next**.
-
-    ![Image of Microsoft Endpoint Configuration Manager console](images/d18e40c9e60aecf1f9a93065cb7567bd.png)
-
-4. Confirm the new Exploit Guard policy by clicking on **Next**.
-
-    ![Image of Microsoft Endpoint Configuration Manager console](images/0a6536f2c4024c08709cac8fcf800060.png)
-
-    
-5. Once the policy is created click **Close**.
-
-    ![Image of Microsoft Endpoint Configuration Manager console](images/95d23a07c2c8bc79176788f28cef7557.png)
-
-    
-
-6.  Right-click on the newly created policy and choose **Deploy**.
-    
-    ![Image of Microsoft Endpoint Configuration Manager console](images/8999dd697e3b495c04eb911f8b68a1ef.png)
-
-7. Target the policy to the newly created Windows 10 collection and click **OK**.
-
-    ![Image of Microsoft Endpoint Configuration Manager console](images/0ccfe3e803be4b56c668b220b51da7f7.png)
-
-After completing this task, you now have successfully configured ASR rules in audit mode.  
-  
-Below are additional steps to verify whether ASR rules are correctly applied to
-endpoints. (This may take few minutes)
-
-
-1. From a web browser, navigate to <https://securitycenter.windows.com>.
-
-2.  Select **Configuration management** from left side menu.
-
-3. Click **Go to attack surface management** in the Attack surface management panel. 
-    
-    ![Image of attack surface management](images/security-center-attack-surface-mgnt-tile.png)
-
-4. Click **Configuration** tab in Attack surface reduction rules reports. It shows ASR rules configuration overview and ASR rules status on each devices.
-
-    ![A screenshot of attack surface reduction rules reports](images/f91f406e6e0aae197a947d3b0e8b2d0d.png)
-
-5. Click each device shows configuration details of ASR rules.
-
-    ![A screenshot of attack surface reduction rules reports](images/24bfb16ed561cbb468bd8ce51130ca9d.png)
-
-See [Optimize ASR rule deployment and
-detections](https://docs.microsoft.com/windows/security/threat-protection/microsoft-defender-atp/configure-machines-asr)   for more details.  
-
-
-### To set Network Protection rules in Audit mode:
-1. In the Microsoft Endpoint Configuration Manager console, navigate to **Assets and  Compliance \> Overview \> Endpoint Protection \> Windows Defender Exploit Guard** and choose **Create Exploit Guard Policy**.
-
-    ![A screenshot System Center Configuration Manager](images/728c10ef26042bbdbcd270b6343f1a8a.png)
-
-2. Select **Network protection**.
-
-3. Set the setting to **Audit** and click **Next**. 
-
-    ![A screenshot System Center Confirugatiom Manager](images/c039b2e05dba1ade6fb4512456380c9f.png)
-
-4. Confirm the new Exploit Guard Policy by clicking **Next**.
-    
-    ![A screenshot Exploit GUard policy](images/0a6536f2c4024c08709cac8fcf800060.png)
-
-5. Once the policy is created click on **Close**.
-
-    ![A screenshot Exploit GUard policy](images/95d23a07c2c8bc79176788f28cef7557.png)
-
-6. Right-click on the newly created policy and choose **Deploy**.
-
-    ![A screenshot Microsoft Endpoint Configuration Manager ](images/8999dd697e3b495c04eb911f8b68a1ef.png)
-
-7. Select the policy to the newly created Windows 10 collection and choose **OK**.
-
-    ![A screenshot Microsoft Endpoint Configuration Manager ](images/0ccfe3e803be4b56c668b220b51da7f7.png)
-
-After completing this task, you now have successfully configured Network
-Protection in audit mode.
-
-### To set Controlled Folder Access rules in Audit mode:
-
-1. In the Microsoft Endpoint Configuration Manager console, navigate to **Assets and Compliance \> Overview \> Endpoint Protection \> Windows Defender Exploit Guard** and choose **Create Exploit Guard Policy**.
-
-    ![A screenshot of Microsoft Endpoint Configuration Manager ](images/728c10ef26042bbdbcd270b6343f1a8a.png)
-
-2. Select **Controlled folder access**.
-    
-3. Set the configuration to **Audit** and click **Next**.
-
-    ![A screenshot of Microsoft Endpoint Configuration Manager ](images/a8b934dab2dbba289cf64fe30e0e8aa4.png)    
-    
-4. Confirm the new Exploit Guard Policy by clicking on **Next**.
-
-    ![A screenshot of Microsoft Endpoint Configuration Manager ](images/0a6536f2c4024c08709cac8fcf800060.png)
-
-5. Once the policy is created click on **Close**.
-
-    ![A screenshot of Microsoft Endpoint Configuration Manager ](images/95d23a07c2c8bc79176788f28cef7557.png)
-
-6. Right-click on the newly created policy and choose **Deploy**.
-
-    ![A screenshot of Microsoft Endpoint Configuration Manager ](images/8999dd697e3b495c04eb911f8b68a1ef.png)
-
-7.  Target the policy to the newly created Windows 10 collection and click **OK**.
-
-    ![A screenshot of Microsoft Endpoint Configuration Manager ](images/0ccfe3e803be4b56c668b220b51da7f7.png)
-
-You have now successfully configured Controlled folder access in audit mode.
-
+## Related topics
+- [Onboarding using Microsoft Endpoint Configuration Manager](onboarding-endpoint-configuraiton-manager.md)
+- [Onboarding using Microsoft Endpoint Manager](onboarding-endpoint-manager.md)