From 7266814c2042d8bf9bbbe86da3218784f4614cfd Mon Sep 17 00:00:00 2001
From: John Kaiser <35939694+CoveMiner@users.noreply.github.com>
Date: Fri, 17 May 2019 14:51:53 -0700
Subject: [PATCH] Update surface-hub-2s-unpack.md

---
 devices/surface-hub/surface-hub-2s-unpack.md | 23 ++++++++++++++++++--
 1 file changed, 21 insertions(+), 2 deletions(-)

diff --git a/devices/surface-hub/surface-hub-2s-unpack.md b/devices/surface-hub/surface-hub-2s-unpack.md
index c9eeca1984..aed1e9b4ee 100644
--- a/devices/surface-hub/surface-hub-2s-unpack.md
+++ b/devices/surface-hub/surface-hub-2s-unpack.md
@@ -1,5 +1,5 @@
 ---
-title: "Unpacking Surface Hub 2S"
+title: "Unpack Surface Hub 2S"
 description: "This page includes information about safely unpacking Surface Hub 2S."
 keywords: separate values with commas
 ms.prod: surface-hub
@@ -11,4 +11,23 @@ ms.topic: article
 ms.localizationpriority: Normal
 ---
 
-# Unpacking Surface Hub 2S
\ No newline at end of file
+# Unpack Surface Hub 2S
+
+Before you remove Surface Hub 2S from the box, make sure you have your mounting solution assembled and someone available to help you.
+
+1. Use the handles on each side of the box to move it to the space where you'll set it up.
+2. Before opening, remove the clips (4) located on the front and back, and then lift the top off the box using the handles.
+3. In the base of the Surface Hub 2S, open the accessories box containing the setup guide, Surface Hub 2 pen, Surface Hub 2 camera and the power cable.
+4. On the back of the surface hub there's an instructional label showing you where to attach the mounting hardware. Install them in place and remove the label.
+5. If you're using a mobile stand remember to lock the wheels to keep the stand in place
+6. Be sure to lift the Surface Hub 2S with both hands and support the bottom of the device.
+7. Align the installed hardware with the slots on the mount so it rests firmly in place.
+8. Follow any further instructions that came with your mounting solution.
+
+## Install pen and camera**
+
+1. Unwrap your Surface Hub 2 pen and attach it magnetically to your preferred side of the device.
+2. Remove the lens cling from the camera and attach it to the USB-C port on the top of the Surface Hub 2S.
+3. Insert the power cable into the back of the device and plug it into a power outlet. Run the cable through any cable guides on your mounting solution and remove the screen clang.
+4. To begin, press the power button on the bottom right.
+