diff --git a/devices/hololens/TOC.md b/devices/hololens/TOC.md
index b6520a1322..7e5b56e47f 100644
--- a/devices/hololens/TOC.md
+++ b/devices/hololens/TOC.md
@@ -5,7 +5,7 @@
 ## [Get your HoloLens 2 ready to use](hololens2-setup.md)
 ## [Set up your HoloLens 2](hololens2-start.md)
 ## [HoloLens 2 fit and comfort FAQ](hololens2-fit-comfort-faq.md)
-## [Frequently asked questions about cleaning HoloLens 2 devices](hololens2-maintenance.md)
+## [HoloLens 2 cleaning FAQ](hololens2-maintenance.md)
 ## [Supported languages for HoloLens 2](hololens2-language-support.md)
 ## [Getting around HoloLens 2](hololens2-basic-usage.md)
 
diff --git a/devices/hololens/hololens2-hardware.md b/devices/hololens/hololens2-hardware.md
index f774eda6d6..6b8175e59d 100644
--- a/devices/hololens/hololens2-hardware.md
+++ b/devices/hololens/hololens2-hardware.md
@@ -135,26 +135,6 @@ In order to maintain/advance Internal Battery Charge Percentage while the device
 
 HoloLens 2 has been tested and conforms to the basic impact protection requirements of ANSI Z87.1, CSA Z94.3 and EN 166.
 
-## Care and cleaning
-
-Handle your HoloLens carefully. Use the headband to lift and carry the HoloLens 2.
-
-As you would for eyeglasses or protective eye-wear, try to keep the HoloLens visor free of dust and fingerprints. When possible, avoid touching the visor. Repeated cleaning could damage the visor, so keep your device clean!
-
-Don't use any cleaners or solvents on your HoloLens, and don't submerge it in water or apply water directly to it.
-
-To clean the visor, remove any dust by using a camel or goat hair lens brush or a bulb-style lens blower. Lightly moisten the microfiber cloth with a small amount of distilled water, then use it to wipe the visor gently in a circular motion.
-
-Clean the rest of the device, including the headband and device arms, with a lint-free microfiber cloth moistened with mild soap and water. Let your HoloLens dry completely before reuse.
-
-![Image that shows how to clean the visor](images/hololens-cleaning-visor.png)
-
-### Replace the brow pad
-
-The brow pad is magnetically attached to the device. To detach it, pull gently away. To replace it, snap it back into place.
-
-![Remove or replace the brow pad](images/hololens2-remove-browpad.png)
-
 ## Next step
 
 > [!div class="nextstepaction"]
diff --git a/devices/hololens/hololens2-maintenance.md b/devices/hololens/hololens2-maintenance.md
index 845e36cba1..88617eea68 100644
--- a/devices/hololens/hololens2-maintenance.md
+++ b/devices/hololens/hololens2-maintenance.md
@@ -1,5 +1,5 @@
 ---
-title: HoloLens 2 device care and cleaning FAQ
+title: HoloLens 2 cleaning FAQ
 description: 
 author: Teresa-Motiv
 ms.author: v-tea
@@ -17,7 +17,7 @@ appliesto:
 - HoloLens 2
 ---
 
-# Frequently asked questions about cleaning HoloLens 2 devices
+# HoloLens 2 cleaning FAQ
 
 > [!IMPORTANT]  
 > Microsoft cannot make a determination of the effectiveness of any given disinfectant product in fighting pathogens such as COVID-19. Please refer to your local public health authority's guidance about how to stay safe from potential infection.