diff --git a/devices/surface/enroll-and-configure-surface-devices-with-semm.md b/devices/surface/enroll-and-configure-surface-devices-with-semm.md index fd8f4626e5..56282326a4 100644 --- a/devices/surface/enroll-and-configure-surface-devices-with-semm.md +++ b/devices/surface/enroll-and-configure-surface-devices-with-semm.md @@ -57,8 +57,10 @@ To create a Surface UEFI configuration package, follow these steps: 6. Click **Password Protection** to add a password to Surface UEFI. This password will be required whenever you boot to UEFI. If this password is not entered, only the **PC information**, **About**, **Enterprise management**, and **Exit** pages will be displayed. This step is optional. 7. When you are prompted, enter and confirm your chosen password for Surface UEFI, and then click **OK**. If you want to clear an existing Surface UEFI password, leave the password field blank. 8. If you do not want the Surface UEFI package to apply to a particular device, on the **Choose which Surface type you want to target** page, click the slider beneath the corresponding Surface Book or Surface Pro 4 image so that it is in the **Off** position. (As shown in Figure 3.) + > [!NOTE] + > You must select a device as none are selected by default. - ![Choose devices for package compatibility](images/surface-semm-enroll-fig3.png "Choose devices for package compatibility") + ![Choose devices for package compatibility](images/surface-semm-enroll-fig3.jpg "Choose devices for package compatibility") *Figure 3. Choose the devices for package compatibility* diff --git a/devices/surface/images/surface-semm-enroll-fig3.jpg b/devices/surface/images/surface-semm-enroll-fig3.jpg new file mode 100644 index 0000000000..bdbc3dfd4f Binary files /dev/null and b/devices/surface/images/surface-semm-enroll-fig3.jpg differ diff --git a/devices/surface/use-system-center-configuration-manager-to-manage-devices-with-semm.md b/devices/surface/use-system-center-configuration-manager-to-manage-devices-with-semm.md index 42c6d6f42f..21616dc89e 100644 --- a/devices/surface/use-system-center-configuration-manager-to-manage-devices-with-semm.md +++ b/devices/surface/use-system-center-configuration-manager-to-manage-devices-with-semm.md @@ -382,56 +382,11 @@ To configure Surface UEFI settings or permissions for Surface UEFI settings, you The computer where ShowSettingsOptions.ps1 is run must have Microsoft Surface UEFI Manager installed, but the script does not require a Surface device. -The following tables show the available settings for Surface Pro 4 and later including Surface Pro 7, Surface Book, Surface Laptop 3, and Surface Go. +The best way to view the most current Setting names and IDs for devices is to use the ConfigureSEMM.ps1 script or the ConfigureSEMM - .ps1 from the SEMM_Powershell.zip in [Surface Tools for IT Downloads](https://www.microsoft.com/download/details.aspx?id=46703). -*Table 1. Surface UEFI settings for Surface Pro 4* +Setting names and IDs for all devices can be seen in the ConfigureSEMM.ps1 script. -| Setting ID | Setting Name | Description | Default Setting | -| --- | --- | --- | --- | -|501| Password | UEFI System Password | | -|200| Secure Boot Keys | Secure Boot signing keys to enable for EFI applications | MsPlus3rdParty | -|300| Trusted Platform Module (TPM) | TPM device enabled or disabled | Enabled | -|301| Docking USB Port | Docking USB Port enabled or disabled | Enabled | -|302| Front Camera | Front Camera enabled or disabled | Enabled | -|303| Bluetooth | Bluetooth radio enabled or disabled | Enabled | -|304| Rear Camera | Rear Camera enabled or disabled | Enabled | -|305| IR Camera | InfraRed Camera enabled or disabled | Enabled | -|308| Wi-Fi and Bluetooth | Wi-Fi and Bluetooth enabled or disabled | Enabled | -|310| Type Cover | Surface Type Cover connector | Enabled | -|320| On-board Audio | On-board audio enabled or disabled | Enabled | -|330| Micro SD Card | Micro SD Card enabled or disabled | Enabled | -|370| USB Port 1 | Side USB Port (1) | UsbPortEnabled | -|400| IPv6 for PXE Boot | Enable IPv6 PXE boot before IPv4 PXE boot |Disabled | -|401| Alternate Boot | Alternate Boot allows users to override the boot order by holding the volume down button when powering up the device | Enabled | -|402| Boot Order Lock | Boot Order variable lock enabled or disabled | Disabled | -|403| USB Boot | Enable booting from USB devices | Enabled | -|500| TPM clear EFI protocol | Enable EFI protocol for invoking TPM clear | Disabled | -|600| Security | UEFI Security Page Display enabled or disabled | Enabled | -|601| Devices | UEFI Devices Page Display enabled or disabled | Enabled | -|602| Boot | UEFI Boot Manager Page Display enabled or disabled | Enabled | - -*Table 2. Surface UEFI settings for Surface Book* - -| Setting ID | Setting Name | Description | Default Setting | -| --- | --- | --- | --- | -| 501 | Password | UEFI System Password | | -| 200 | Secure Boot Keys | Secure Boot signing keys to enable for EFI applications | MsPlus3rdParty | -| 300 | Trusted Platform Module (TPM) | TPM device enabled or disabled | Enabled | -| 301 | Docking USB Port | Docking USB Port enabled or disabled | Enabled | -| 302 | Front Camera | Front Camera enabled or disabled | Enabled | -| 303 | Bluetooth | Bluetooth radio enabled or disabled | Enabled | -| 304 | Rear Camera | Rear Camera enabled or disabled | Enabled | -| 305 | IR Camera | InfraRed Camera enabled or disabled | Enabled | -| 308 | Wi-Fi and Bluetooth | Wi-Fi and Bluetooth enabled or disabled | Enabled | -| 320 | On-board Audio | On-board audio enabled or disabled | Enabled | -| 400 | IPv6 for PXE Boot Enable | IPv6 PXE boot before IPv4 PXE boot | Disabled | -| 401 | Alternate Boot | Alternate Boot allows users to override the boot order by holding the volume down button when powering up the device | Enabled | -| 402 | Boot Order Lock | Boot Order variable lock enabled or disabled | Disabled | -| 403 | USB Boot | Enable booting from USB devices | Enabled | -| 500 | TPM clear EFI protocol | Enable EFI protocol for invoking TPM clear | Disabled | -| 600 | Security | UEFI Security Page Display enabled or disabled | Enabled | -| 601 | Devices | UEFI Devices Page Display enabled or disabled | Enabled | -| 602 | Boot | UEFI Boot Manager Page Display enabled or disabled | Enabled | +Setting names and IDs for specific devices can be seen in the ConfigureSEMM - .ps1 scripts. For example, setting names and IDs for Surface Pro X can be found in the ConfigureSEMM – ProX.ps1 script. ## Deploy SEMM Configuration Manager scripts