| Microsoft Surface Hub is an all-in-one productivity device that is intended for brainstorming, collaboration, and presentations. In order to get the maximum benefit from Surface Hub, your organization’s infrastructure and the Surface Hub itself must be properly set up and integrated. The documentation in this library describes what needs to be done both before and during setup in order to help you optimize your use of the device. |  |
In order to function properly, the Surface Hub should have access to a wired or wireless network. Overall, a wired connection is preferred. 802.1x Authentication is supported for both wired and wireless connections.
**Dynamic IP:** The Surface Hub cannot be configured to use a static IP. It must use DHCP to assign an IP address.
**Proxy servers:** If your topology requires a connection to a proxy server to reach Internet services, then you can configure it during first run, or in Settings. Proxy credentials are stored across Surface Hub sessions and only need to be set once. | +| Network and Internet access |In order to function properly, the Surface Hub should have access to a wired or wireless network. Overall, a wired connection is preferred.
**Dynamic IP:** The Surface Hub cannot be configured to use a static IP. It must use DHCP to assign an IP address.
**Proxy servers:** If your topology requires a connection to a proxy server to reach Internet services, then you can configure it during first run, or in Settings. | Additionally, note that Surface Hub requires the following open ports: - HTTPS: 443 - HTTP: 80 -- NTP: 123 Depending on your environment, access to additional ports may be needed: - For online environments, see [Office 365 IP URLs and IP address ranges](https://support.office.com/en-us/article/Office-365-URLs-and-IP-address-ranges-8548a211-3fe7-47cb-abb1-355ea5aa88a2?ui=en-US&rs=en-US&ad=US). @@ -42,20 +41,6 @@ Microsoft collects telemetry to help improve your Surface Hub experience. Add th - Telemetry client endpoint: `https://vortex.data.microsoft.com/` - Telemetry settings endpoint: `https://settings.data.microsoft.com/` -### Proxy configuration - -If your organization restricts computers on your network from connecting to the Internet, there is a set of URLs that need to be available for devices to use Store for Business. Some of the Store for Business features use Windows Store app and Windows Store services. Devices using Store for Business – either to acquire, install, or update apps – will need access to these URLs. If you use a proxy server to block traffic, your configuration needs to allow these URLs: - -- login.live.com -- login.windows.net -- account.live.com -- clientconfig.passport.net -- windowsphone.com -- *.wns.windows.com -- *.microsoft.com -- www.msftncsi.com (prior to Windows 10, version 1607) -- www.msftconnecttest.com/connecttest.txt (replaces www.msftncsi.com starting with Windows 10, version 1607) - ## Work with other admins @@ -64,7 +49,7 @@ Surface Hub interacts with a few different products and services. Depending on t ## Create and verify device account -A device account is an Exchange resource account that Surface Hub uses to display its meeting calendar, join Skype for Business calls, send email, and (optionally) to authenticate to Exchange. See [Create and test a device account](create-and-test-a-device-account-surface-hub.md) for details. +A device account is an Exchange resource account that Surface Hub uses to display its meeting calendar, join Skype for Business calls, and send email. See [Create and test a device account](create-and-test-a-device-account-surface-hub.md) for details. After you've created your device account, there are a couple of ways to verify that it's setup correctly. - Run Surface Hub device account validation PowerShell scripts. For more information, see [Surface Hub device account scripts](https://gallery.technet.microsoft.com/scriptcenter/Surface-Hub-device-account-6db77696) in Script Center, or [PowerShell scripts for Surface Hub](appendix-a-powershell-scripts-for-surface-hub.md) later in this guide. diff --git a/devices/surface-hub/provisioning-packages-for-certificates-surface-hub.md b/devices/surface-hub/provisioning-packages-for-certificates-surface-hub.md new file mode 100644 index 0000000000..73dd21ac2e --- /dev/null +++ b/devices/surface-hub/provisioning-packages-for-certificates-surface-hub.md @@ -0,0 +1,221 @@ +--- +title: Create provisioning packages (Surface Hub) +description: For Windows 10, settings that use the registry or a content services platform (CSP) can be configured using provisioning packages. You can also add certificates during first run using provisioning. +ms.assetid: 8AA25BD4-8A8F-4B95-9268-504A49BA5345 +keywords: add certificate, provisioning package +ms.prod: w10 +ms.mktglfcycl: deploy +ms.sitesec: library +ms.pagetype: surfacehub +author: TrudyHa +localizationpriority: medium +--- + +# Create provisioning packages (Surface Hub) + +This topic explains how to create a provisioning package using the Windows Imaging and Configuration Designer (ICD), and apply it to Surface Hub devices. For Surface Hub, you can use provisioning packages to add certificates, install Universal Windows Platform (UWP) apps, and customize policies and settings. + +You can apply a provisioning package using a USB during first run, or through the **Settings** app. + + +## Advantages +- Quickly configure devices without using a MDM provider. + +- No network connectivity required. + +- Simple to apply. + +[Learn more about the benefits and uses of provisioning packages.](https://technet.microsoft.com/itpro/windows/whats-new/new-provisioning-packages) + + +## Requirements + +To create and apply a provisioning package to a Surface Hub, you'll need the following: + +- Windows Imaging and Configuration Designer (ICD), which is installed as a part of the [Windows 10 Assessment and Deployment Kit (ADK)](http://go.microsoft.com/fwlink/p/?LinkId=526740). +- A PC running Windows 10. +- A USB flash drive. +- If you apply the package using the **Settings** app, you'll need device admin credentials. + +You'll create the provisioning package on a PC running Windows 10, save the package to a USB drive, and then deploy it to your Surface Hub. + + +## Supported items for Surface Hub provisioning packages + +Currently, you can add these items to provisioning packages for Surface Hub: +- **Certificates** - You can add certificates, if needed, to authenticate to Microsoft Exchange. +- **Universal Windows Platform (UWP) apps** - You can install UWP apps. This can be an offline-licensed app from the Windows Store for Business, or an app created by an in-house dev. +- **Policies** - Surface Hub supports a subset of the policies in the [Policy configuration service provider](https://msdn.microsoft.com/library/windows/hardware/dn904962.aspx). Some of those policies can be configured with ICD. +- **Settings** - You can configure any setting in the [SurfaceHub configuration service provider](https://msdn.microsoft.com/library/windows/hardware/mt608323.aspx). + + +## Create the provisioning package + +Use the Windows Imaging and Configuration Designer (ICD) tool included in the Windows Assessment and Deployment Kit (ADK) for Windows 10 to create a provisioning package. When you install the ADK, you can choose to install only the Imaging and Configuration Designer (ICD). [Install the ADK.](http://go.microsoft.com/fwlink/p/?LinkId=526740) + +1. Open Windows ICD (by default, `%windir%\Program Files (x86)\Windows Kits\10\Assessment and Deployment Kit\Imaging and Configuration Designer\x86\ICD.exe`). + +2. Click **Advanced provisioning**. + +  + +3. Name your project and click **Next**. + +4. Select **Common to Windows 10 Team edition**, click **Next**, and then click **Finish**. + +  + +5. In the project, under **Available customizations**, select **Common Team edition settings**. + +  + + +### Add a certificate to your package +You can use provisioning packages to install certificates that will allow the device to authenticate to Microsoft Exchange. + +> [!NOTE] +> Provisioning packages can only install certificates to the device (local machine) store, and not to the user store. If your organization requires that certificates must be installed to the user store, use Mobile Device Management (MDM) to deploy these certificates. See your MDM solution documentation for details. + +1. In the **Available customizations** pane, go to **Runtime settings** > **Certificates** > **ClientCertificates**. + +2. Enter a **CertificateName** and then click **Add**. + +2. Enter the **CertificatePassword**. + +3. For **CertificatePath**, browse and select the certificate. + +4. Set **ExportCertificate** to **False**. + +5. For **KeyLocation**, select **Software only**. + + +### Add a Universal Windows Platform (UWP) app to your package +Before adding a UWP app to a provisioning package, you need the app package (either an .appx, or .appxbundle) and any dependency files. If you acquired the app from the Windows Store for Business, you will also need the *unencoded* app license. See [Distribute offline apps](https://technet.microsoft.com/itpro/windows/manage/distribute-offline-apps#download-an-offline-licensed-app) to learn how to download these items from the Windows Store for Business. + +1. In the **Available customizations** pane, go to **Runtime settings** > **UniversalAppInstall** > **DeviceContextApp**. + +2. Enter a **PackageFamilyName** for the app and then click **Add**. For consistency, use the app's package family name. If you acquired the app from the Windows Store for Business, you can find the package family name in the app license. Open the license file using a text editor, and use the value between the \+Optionally, you can click **Browse** to change the default output location. + +8. Click **Next**. + +9. Click **Build** to start building the package. The project information is displayed in the build page and the progress bar indicates the build status.
+If you need to cancel the build, click **Cancel**. This cancels the current build process, closes the wizard, and takes you back to the **Customizations Page**. + +10. If your build fails, an error message will show up that includes a link to the project folder. You can scan the logs to determine what caused the error. Once you fix the issue, try building the package again.
+If your build is successful, the name of the provisioning package, output directory, and project directory will be shown. + + - If you choose, you can build the provisioning package again and pick a different path for the output package. To do this, click **Back** to change the output package name and path, and then click **Next** to start another build. + + - If you are done, click **Finish** to close the wizard and go back to the **Customizations Page**. + +11. Select the **output location** link to go to the location of the package. Copy the .ppkg to an empty USB flash drive. + + +## Apply a provisioning package to Surface Hub + +There are two options for deploying provisioning packages to a Surface Hub. You can apply a provisioning packing [during the first run wizard](#apply-a-provisioning-package-during-first-run), or using [Settings](#apply-a-package-using-settings). + + +### Apply a provisioning package during first run + +> [!IMPORTANT] +> Only use provisioning packages to install certificates during first run. Use the **Settings** app to install apps and apply other settings. + +1. When you turn on the Surface Hub for the first time, the first-run program will display the [**Hi there page**](first-run-program-surface-hub.md#first-page). Make sure that the settings are properly configured before proceeding. + +2. Insert the USB flash drive containing the .ppkg file into the Surface Hub. If the package is in the root directory of the drive, the first-run program will recognize it and ask if you want to set up the device. Select **Set up**. + +  + +3. The next screen asks you to select a provisioning source. Select **Removable Media** and tap **Next**. + +  + +4. Select the provisioning package (\*.ppkg) that you want to apply, and tap **Next**. Note that you can only install one package during first run. + +  + +5. The first-run program will show you a summary of the changes that the provisioning package will apply. Select **Yes, add it**. The package will be applied, and you'll be taken to the next page in the first-run program. + +  + + +### Apply a package using Settings + +1. Insert the USB flash drive containing the .ppkg file into the Surface Hub. + +2. From the Surface Hub, start **Settings** and enter the admin credentials when prompted. + +3. Navigate to **This device** > **Device management**. Under **Provisioning packages**, select **Add or remove a provisioning package**. + +4. Select **Add a package**. + +5. Choose your provisioning package and select **Add**. You may have to re-enter the admin credentials if prompted. + +6. You'll see a summary of the changes that the provisioning package will apply. Select **Yes, add it**. diff --git a/devices/surface-hub/provisioning-packages-for-surface-hub.md b/devices/surface-hub/provisioning-packages-for-surface-hub.md deleted file mode 100644 index 0d3604f6ad..0000000000 --- a/devices/surface-hub/provisioning-packages-for-surface-hub.md +++ /dev/null @@ -1,319 +0,0 @@ ---- -title: Create provisioning packages (Surface Hub) -description: For Windows 10, settings that use the registry or a configuration service provider (CSP) can be configured using provisioning packages. -ms.assetid: 8AA25BD4-8A8F-4B95-9268-504A49BA5345 -keywords: add certificate, provisioning package -ms.prod: w10 -ms.mktglfcycl: deploy -ms.sitesec: library -ms.pagetype: surfacehub -author: jdeckerMS -localizationpriority: medium ---- - -# Create provisioning packages (Surface Hub) - -This topic explains how to create a provisioning package using the Windows Configuration Designer, and apply it to Surface Hub devices. For Surface Hub, you can use provisioning packages to add certificates, install Universal Windows Platform (UWP) apps, and customize policies and settings. - -You can apply a provisioning package using a USB stick during first-run setup, or through the **Settings** app. - - -## Advantages -- Quickly configure devices without using a mobile device management (MDM) provider. - -- No network connectivity required. - -- Simple to apply. - -[Learn more about the benefits and uses of provisioning packages.](https://technet.microsoft.com/itpro/windows/configure/provisioning-packages) - - -## Requirements - -To create and apply a provisioning package to a Surface Hub, you'll need the following: - -- Windows Configuration Designer, which can be installed from Windows Store or from the Windows 10 Assessment and Deployment Kit (ADK). [Learn how to install Windows Configuration Designer.](https://technet.microsoft.com/itpro/windows/configure/provisioning-install-icd) -- A USB stick. -- If you apply the package using the **Settings** app, you'll need device admin credentials. - -You create the provisioning package on a PC running Windows 10, save the package to a USB drive, and then deploy it to your Surface Hub. - - -## Supported items for Surface Hub provisioning packages - -Using the **Provision Surface Hub devices** wizard, you can: - -- Enroll in Active Directory, Azure Active Directory, or MDM -- Create an device administrator account -- Add applications and certificates -- Configure proxy settings -- Add a Surface Hub configuration file - ->[!WARNING] ->You must run Windows Configuration Designer on Windows 10 to configure Azure Active Directory enrollment using the wizard. - -Using the advanced provisioning editor, you can add these items to provisioning packages for Surface Hub: - -- **Policies** - Surface Hub supports a subset of the policies in the [Policy configuration service provider](https://msdn.microsoft.com/library/windows/hardware/dn904962.aspx#surfacehubpolicies). -- **Settings** - You can configure any setting in the [SurfaceHub configuration service provider](https://msdn.microsoft.com/library/windows/hardware/mt608323.aspx). - ->[!TIP] -> Use the wizard to create a package with the common settings, then switch to the advanced editor to add other settings. -> -> - -## Use the Surface Hub provisioning wizard - -After you [install Windows Configuration Designer](https://technet.microsoft.com/itpro/windows/configure/provisioning-install-icd), you can create a provisioning package. - -### Create the provisioning package - -1. Open Windows Configuration Designer: - - From either the Start screen or Start menu search, type 'Windows Configuration Designer' and click on the Windows Configuration Designer shortcut, - - or - - - If you installed Windows Configuration Designer from the ADK, navigate to `C:\Program Files (x86)\Windows Kits\10\Assessment and Deployment Kit\Imaging and Configuration Designer\x86` (on an x64 computer) or `C:\Program Files\Windows Kits\10\Assessment and Deployment Kit\Imaging and Configuration Designer\x86\ICD.exe` (on an x86 computer), and then double-click **ICD.exe**. - -2. Click **Provision Surface Hub devices**. - -3. Name your project and click **Next**. - -### Configure settings - -
|  To provision the device with a certificate, click **Add a certificate**. Enter a name for the certificate, and then browse to and select the certificate to be used. |  |
|  Toggle **Yes** or **No** for proxy settings. The default configuration for Surface Hub is to automatically detect proxy settings, so you can select **No** if that is the setting that you want. However, if your infrastructure previously required using a proxy server and has changed to not require a proxy server, you can use a provisioning package to revert your Surface Hub devices to the default settings by selecting **Yes** and **Automatically detect settings**. If you toggle **Yes**, you can select to automatically detect proxy settings, or you can manually configure the settings by entering a URL to a setup script, or a static proxy server address. You can also identify whether to use the proxy server for local addresses, and enter exceptions (addresses that Surface Hub should connect to directly without using the proxy server). |  |
|  You can enroll the device in Active Directory and specify a security group to use the Settings app, enroll in Azure Active Directory to allow global admins to use the Settings app, or create a local administrator account on the device.To enroll the device in Active Directory, enter the credentials for a least-privileged user account to join the device to the domain, and specify the security group to have admin credentials on Surface Hub. If a provisioning package that enrolls a device in Active Directory is going to be applied to a Surface Hub that was reset, the same domain account can only be used if the account listed is a domain administrator or is the same account that set up the Surface Hub initially. Otherwise, a different domain account must be used in the provisioning package.Before you use a Windows Configuration Designer wizard to configure bulk Azure AD enrollment, [set up Azure AD join in your organization](https://docs.microsoft.com/azure/active-directory/active-directory-azureadjoin-setup). The **maximum number of devices per user** setting in your Azure AD tenant determines how many times the bulk token that you get in the wizard can be used. To enroll the device in Azure AD, select that option and enter a friendly name for the bulk token you will get using the wizard. Set an expiration date for the token (maximum is 30 days from the date you get the token). Click **Get bulk token**. In the **Let's get you signed in** window, enter an account that has permissions to join a device to Azure AD, and then the password. Click **Accept** to give Windows Configuration Designer the necessary permissions.To create a local administrator account, select that option and enter a user name and password. **Important:** If you create a local account in the provisioning package, you must change the password using the **Settings** app every 42 days. If the password is not changed during that period, the account might be locked out and unable to sign in. |  |
|  Toggle **Yes** or **No** for enrollment in MDM. If you toggle **Yes**, you must provide a service account and password or certificate thumbprint that is authorized to enroll the device, and also specify the authentication type. If required by your MDM provider, also enter the URLs for the discovery service, enrollment service, and policy service. [Learn more about managing Surface Hub with MDM.](manage-settings-with-mdm-for-surface-hub.md) |  |
|  You can install multiple Universal Windows Platform (UWP) apps in a provisioning package. For help with the settings, see [Provision PCs with apps](https://technet.microsoft.com/itpro/windows/configure/provision-pcs-with-apps). **Important:** Although the wizard interface allows you to select a Classic Win32 app, only include UWP apps in a provisioning package that will be applied to Surface Hub. If you include a Classic Win32 app, provisioning will fail. |  |
|  You don't configure any settings in this step. It provides instructions for including a configuration file that contains a list of device accounts. The configuration file must not contain column headers. When you apply the provisioning package to Surface Hub, if a Surface Hub configuration file is included on the USB drive, you can select the account and friendly name for the device from the file. See [Sample configuration file](#sample-configuration-file) for an example.**Important:** The configuration file can only be applied during the out-of-box setup experience (OOBE) and can only be used with provisioning packages created using the Windows Configuration Designer released with Windows 10, version 1703. |  |
| You can set a password to protect your provisioning package. You must enter this password when you apply the provisioning package to a device. |  |
-Optionally, you can click **Browse** to change the default output location. - -8. Click **Next**. - -9. Click **Build** to start building the package. The project information is displayed in the build page and the progress bar indicates the build status.
-If you need to cancel the build, click **Cancel**. This cancels the current build process, closes the wizard, and takes you back to the **Customizations Page**. - -10. If your build fails, an error message will show up that includes a link to the project folder. You can scan the logs to determine what caused the error. Once you fix the issue, try building the package again.
-If your build is successful, the name of the provisioning package, output directory, and project directory will be shown. - - - If you choose, you can build the provisioning package again and pick a different path for the output package. To do this, click **Back** to change the output package name and path, and then click **Next** to start another build. - - - If you are done, click **Finish** to close the wizard and go back to the **Customizations Page**. - -11. Select the **output location** link to go to the location of the package. Copy the .ppkg to an empty USB flash drive. - - -## Apply a provisioning package to Surface Hub - -There are two options for deploying provisioning packages to a Surface Hub. You can apply a provisioning packing [during the first run wizard](#apply-a-provisioning-package-during-first-run), or using [Settings](#apply-a-package-using-settings). - - -### Apply a provisioning package during first run - -> [!IMPORTANT] -> Only use provisioning packages to install certificates during first run. Use the **Settings** app to install apps and apply other settings. - -1. When you turn on the Surface Hub for the first time, the first-run program will display the [**Hi there page**](first-run-program-surface-hub.md#first-page). Make sure that the settings are properly configured before proceeding. - -2. Insert the USB flash drive containing the .ppkg file into the Surface Hub. If the package is in the root directory of the drive, the first-run program will recognize it and ask if you want to set up the device. Select **Set up**. - -  - -3. The next screen asks you to select a provisioning source. Select **Removable Media** and tap **Next**. - -  - -4. Select the provisioning package (\*.ppkg) that you want to apply, and tap **Next**. Note that you can only install one package during first run. - -  - -5. The first-run program will show you a summary of the changes that the provisioning package will apply. Select **Yes, add it**. - -  - -6. If a configuration file is included in the root directory of the USB flash drive, you will see **Select a configuration**. The first device account in the configuration file will be shown with a summary of the account information that will be applied to the Surface Hub. - -  - -7. In **Select a configuration**, select the device name to apply, and then click **Next**. - -  - -The settings from the provisioning package will be applied to the device and OOBE will be complete. After the device restarts, you can remove the USB flash drive. - -### Apply a package using Settings - -1. Insert the USB flash drive containing the .ppkg file into the Surface Hub. - -2. From the Surface Hub, start **Settings** and enter the admin credentials when prompted. - -3. Navigate to **Surface Hub** > **Device management**. Under **Provisioning packages**, select **Add or remove a provisioning package**. - -4. Select **Add a package**. - -5. Choose your provisioning package and select **Add**. You may have to re-enter the admin credentials if prompted. - -6. You'll see a summary of the changes that the provisioning package will apply. Select **Yes, add it**. - - diff --git a/devices/surface-hub/remote-surface-hub-management.md b/devices/surface-hub/remote-surface-hub-management.md index 57bd619f8b..41588251fe 100644 --- a/devices/surface-hub/remote-surface-hub-management.md +++ b/devices/surface-hub/remote-surface-hub-management.md @@ -6,7 +6,7 @@ ms.prod: w10 ms.mktglfcycl: manage ms.sitesec: library ms.pagetype: surfacehub -author: jdeckerMS +author: TrudyHa localizationpriority: medium --- diff --git a/devices/surface-hub/save-bitlocker-key-surface-hub.md b/devices/surface-hub/save-bitlocker-key-surface-hub.md index 6e6b8b5317..2354de0f40 100644 --- a/devices/surface-hub/save-bitlocker-key-surface-hub.md +++ b/devices/surface-hub/save-bitlocker-key-surface-hub.md @@ -7,7 +7,7 @@ ms.prod: w10 ms.mktglfcycl: manage ms.sitesec: library ms.pagetype: surfacehub, security -author: jdeckerMS +author: TrudyHa localizationpriority: medium --- diff --git a/devices/surface-hub/set-up-your-surface-hub.md b/devices/surface-hub/set-up-your-surface-hub.md index 96310f473c..95b7c2c92f 100644 --- a/devices/surface-hub/set-up-your-surface-hub.md +++ b/devices/surface-hub/set-up-your-surface-hub.md @@ -7,7 +7,7 @@ ms.prod: w10 ms.mktglfcycl: deploy ms.sitesec: library ms.pagetype: surfacehub -author: jdeckerMS +author: TrudyHa localizationpriority: medium --- diff --git a/devices/surface-hub/setup-worksheet-surface-hub.md b/devices/surface-hub/setup-worksheet-surface-hub.md index d8e7f921c0..a77cf5850f 100644 --- a/devices/surface-hub/setup-worksheet-surface-hub.md +++ b/devices/surface-hub/setup-worksheet-surface-hub.md @@ -7,7 +7,7 @@ ms.prod: w10 ms.mktglfcycl: deploy ms.sitesec: library ms.pagetype: surfacehub -author: jdeckerMS +author: TrudyHa localizationpriority: medium --- diff --git a/devices/surface-hub/surface-hub-administrators-guide.md b/devices/surface-hub/surface-hub-administrators-guide.md new file mode 100644 index 0000000000..4786082d45 --- /dev/null +++ b/devices/surface-hub/surface-hub-administrators-guide.md @@ -0,0 +1,76 @@ +--- +title: Microsoft Surface Hub administrator's guide +description: This guide covers the installation and administration of devices running Surface Hub, and is intended for use by anyone responsible for these tasks, including IT administrators and developers. +ms.assetid: e618aab7-3a94-4159-954e-d455ef7b8839 +keywords: Surface Hub, installation, administration, administrator's guide +ms.prod: w10 +ms.mktglfcycl: deploy +ms.sitesec: library +ms.pagetype: surfacehub +author: TrudyHa +localizationpriority: medium +--- + +# Microsoft Surface Hub administrator's guide + + +This guide covers the installation and administration of devices running Surface Hub, and is intended for use by anyone responsible for these tasks, including IT administrators and developers. + +Before you power on Microsoft Surface Hub for the first time, make sure you've [completed preparation items](prepare-your-environment-for-surface-hub.md), and that you have the information listed in the [Setup worksheet](setup-worksheet-surface-hub.md). When you do power it on, the device will walk you through a series of setup screens. If you haven't properly set up your environment, or don't have the required information, you'll have to do extra work afterward making sure the settings are correct. + +## In this section + + +
| Topic | +Description | +
|---|---|
[Intro to Microsoft Surface Hub](intro-to-surface-hub.md) |
+Surface Hub is an all-in-one productivity device that is intended for brainstorming, collaboration, and presentations. In order to get the maximum benefit from Surface Hub, your organization’s infrastructure and the Surface Hub itself must be properly set up and integrated. This guide describes what needs to be done both before and during setup in order to help you optimize your use of the device. |
+
[Physically install Microsoft Surface Hub](physically-install-your-surface-hub-device.md) |
+The Surface Hub Readiness Guide will help make sure that your site is ready for the installation. You can download the Guide from the [Microsoft Download Center](https://go.microsoft.com/fwlink/?LinkId=718144). It includes planning information for both the 55" and 84" devices, as well as info on moving the Surface Hub from receiving to the installation location, mounting options, and a list of what's in the box. |
+
[Prepare your environment for Microsoft Surface Hub](prepare-your-environment-for-surface-hub.md) |
+This section contains an overview of the steps required to prepare your environment so that you can use all of the features of Surface Hub. See [Intro to Surface Hub](intro-to-surface-hub.md) for a description of how the device and its features interact with your IT environment. |
+
[Set up Microsoft Surface Hub](set-up-your-surface-hub.md) |
+Set up instructions for Surface Hub include a setup worksheet, and a walkthrough of the first-run program. |
+
[Manage Microsoft Surface Hub](manage-surface-hub.md) |
+How to manage your Surface Hub after finishing the first-run program. |
+
[Troubleshoot Microsoft Surface Hub](troubleshoot-surface-hub.md) |
+Troubleshoot common problems, including setup issues, Exchange ActiveSync errors. |
+
[Appendix: PowerShell](appendix-a-powershell-scripts-for-surface-hub.md) |
+PowerShell scripts to help set up and manage your Surface Hub . |
+
| Issue | +Causes | +Possible fixes | +
|---|---|---|
Can't call a Skype consumer from my Surface Hub. |
+Outgoing calls aren't supported yet. |
+None currently. |
+