sync

windows/configuration/TOC.md

@@ -113,7 +113,8 @@
 #### [OtherAssets](wcd/wcd-otherassets.md)     
 #### [Personalization](wcd/wcd-personalization.md)     
 #### [Policies](wcd/wcd-policies.md) 
-#### [ProvisioningCommands](wcd/wcd-provisioningcommands.md)     
+#### [ProvisioningCommands](wcd/wcd-provisioningcommands.md)    
+#### [RcsPresence](wcd/wcd-rcspresence.md) 
 #### [SharedPC](wcd/wcd-sharedpc.md)     
 #### [Shell](wcd/wcd-shell.md)     
 #### [SMISettings](wcd/wcd-smisettings.md)     

windows/configuration/wcd/wcd-calling.md

@@ -109,16 +109,47 @@ See [Dial string overrides when roaming](https://docs.microsoft.com/windows-hard
 
 Setting | Description
 --- | ---
+AdjustCDMACallTime | Change the calculation of CDMA call duration to exclude the time before the call connects. 
 AssistedDialSetting | Turn off the international assist feature that helps users with the country codes needed for dialing international phone numbers.
 CallIDMatch | Sets the number of digits that the OS will try to match against contacts for Caller ID. For any country/region that doesn't exist in the default mapping table, mobile operators can use this legacy CallIDMatch setting to specify the minimum number of digits to use for matching caller ID.
+CallRecordingOff | Indicates if call recording is turned off. Users will not see the call recording functionality when this is set to **True**.
+ConferenceCallMaximumPartyCount | Enter a number to limit the number of parties that can participate in a conference call.
 ContinuousDTMFEnabled | Enable DTMF tone duration for as long as the user presses a dialpad key.
+DisableVideoUpgradeStoreNavigation | If there are no compatible video upgrade apps installed, tapping the video upgrade button will launch a dialog that will navigate to the Microsoft Store. If this option is enabled, it will show a dialog that informs the user that no video app is installed, but it will not navigate to the Microsoft Store.
 DisableVoicemailPhoneNumberDisplay | Disable the display of the voicemail phone number below the Voicemail label in call progress dialog.
+DisplayNoDataMessageDuringCall | Display a message to the user indicating that there is no Internet connectivity during a phone call.
+DisplayNumberAsDialed | Display the outgoing number "as dialed" rather than "as connected".
+EnableVideoCalling | Set to **True** to enable video calling.
 HideCallForwarding | Partners can hide the user option to turn on call forwarding. By default, users can decide whether to turn on call forwarding. Partners can hide this user option so that call forwarding is permanently disabled.
+HideSIMSecurityUI | Hide the SIM Security panel from phone Settings.
+LowVideoQualityTimeout | Configure the phone timer to automatically drop video when the quality is low, in milliseconds.
+MinTimeBetweenCallSwaps | Configure how often the user can swap between two active phone calls, in milliseconds.
+PromptVideoCallingCharges | Prompt user for charges associated with video calls.
 ShowLongTones | Partners can make a user option visible that makes it possible to toggle between short and long DTMF tones, instead of the default continuous tones. By default, the phone supports Dual-Tone Multi-frequency (DTMF) with continuous tones. Partners can make a user option visible that makes it possible to toggle between short and long tones instead.
 UseOKForUssdDialogs | OEMs can change the button label in USSD dialogs from **Close** (the default) to **OK**.
+UseVoiceDomainForEmergencyCallBranding | Use voice domain to decide whether to use **Emergency calls only** or **No service** in branding.
+VideoCallingChargesMessage | Enter text for the message informing the user about the charges associated with video calls.
+VideoCallingChargesTitle | Enter text for the title of the dialog informing the user about the charges associated with video calls.
+VideoCallingDescription | Enter text to describe the video calling feature.
+VideoCallingLabel | Enter text to describe the video calling toggle.
+VideoCapabilityDescription | Enter text to describe the video capability feature.
+VideoCapabilityLabel | Enter text to describe the video capability toggle.
+VideoTransitionTimeout | Enter the the time in milliseconds to check how long the video transition state will remain until the remote party responds. The minimum value is 10000 and the maximum value is 30000. 
 VoLTEAudioQualityString | Partners can add a string to the call progress screen to indicate if the active call is a high quality voice over LTE (VoLTE). Set the value of VoLTEAudioQualityString to the string that you want to display in the call progress screen to indicate that the call is a VoLTE call. This string is combined with the PLMN so if the string is "VoLTE", the resulting string is "PLMN_String VoLTE". For example, the string displayed in the call progress screen can be "Litware VoLTE" if the PLMN_String is "Litware". The value you specify for VoLTEAudioQualityString must exceed 10 characters.
 
 
+## PhoneShellUI
+
+Setting | Description
+--- | ---
+EnableSoftwareProximitySensorMitigation | Enable software proximity sensor mitigation.
+
+## PhoneSmsFilter
+
+Setting | Description
+--- | ---
+AppId | Enter the app ID for your phone call/SMS filter application.
+
 ## SupplementaryServiceCodeOverrides
 
 See [Dialer codes for supplementary services](https://docs.microsoft.com/windows-hardware/customize/mobile/mcsf/dialer-codes-for-supplementary-services).

windows/configuration/wcd/wcd-cellcore.md

@@ -22,24 +22,21 @@ Use to configure settings for cellular data.
  Setting groups | Desktop editions | Mobile editions | Surface Hub | HoloLens | IoT Core 
  --- | :---: | :---: | :---: | :---: | :---: 
  PerDevice: [CellConfigurations](#cellconfigurations) |  | X |  |  | 
- PerDevice: [CellData](#celldata) CellularFailover | X | X |   |  |   
+ PerDevice: [CellData](#celldata) CellularFailover | X | X | X  |  |   
- PerDevice: [CellData](#celldata) MaxNumberOfPDPContexts |  | X |  |  |  
+ PerDevice: [CellUX](#cellux)  | X | X | X |  |
- PerDevice: [CellData](#celldata) ModemProfiles |  | X |  |  | 
- PerDevice: [CellData](#celldata) PersistAtImaging |  | X |  |  |  
- PerDevice: [CellUX](#cellux)  |  | X |  |  |
  PerDevice: [CGDual](#cgdual)  |  | X |  |  |
- PerDevice: [eSim](#esim) | X | X |   |  | 
+ PerDevice: [eSim](#esim) | X | X | X  |  | 
  PerDevice: [External](#external)  |  | X |  |  |
  PerDevice: [General](#general)  |  | X |  |  |
  PerDevice: [RCS](#rcs)  |  | X |  |  |
- PerDevice: [SMS](#sms)  | X | X |   |  |  
+ PerDevice: [SMS](#sms)  | X | X | X  |  |  
  PerDevice: [UIX](#uix)  |  | X |  |  |
  PerDevice: [UTK](#utk)  |  | X |  |  |
  PerlMSI: [CellData](#celldata2) |  | X |  |  |
  PerIMSI: [CellUX](#cellux2) |  | X |  |  |
  PerIMSI: [General](#general2) |  | X |  |  |
  PerIMSI: [RCS](#rcs2) |  | X |  |  |
- PerIMSI: [SMS](#sms2) | X | X |   |  | 
+ PerIMSI: [SMS](#sms2) | X | X | X  |  | 
  PerIMSI: [UTK](#utk2) |  | X |  |  |
  PerIMSI: [VoLTE](#volte) |  | X |  |  |
 
@@ -78,6 +75,7 @@ APNIPTypeIfHidden | Select between **IPV4**, **IPV6**, **IPV4V6**, and **IPV4V6X
 Critical > ShowVoLTEToggle | Select **Yes** to show the VoLTE toggle in the **Settings** > **Cellular+SIM** > **SIM** settings page. Select **No** to hide the toggle.
 Disable2GByDefault | Select **Yes** to disable 2G by default. Select **No** to enable 2G.
 Disabled2GNoticeDescription | Enter text to customize the notification for disabled 2G.
+EmbeddedUiccSlotId |  ID for embedded UICC (eUICC) slot.
 GenericWifiCallingErrorMessage | Enter text to customize the generic error message when a Wi-Fi calling error occurs.
 Hide3GPP2ModeSelection | Select **Yes** to hide the **CDMA** option in the network **Mode** selection drop-down menu. Select **No** to show the **CDMA** option.
 Hide3GPP2Selection | For 3GPP2 or CDMA phones, select **Yes** to hide the **Network Type** drop-down menu in the **SIM** settings screen. Select **No** to show **Network Type**.
@@ -118,6 +116,8 @@ ShowSpecificWifiCallingError | Select **Yes** to show a specific error message b
 ShowViewAPN | Select **Yes** to show the **View Internet APN** button in **Settings** > **cellular+SIM**.
 ShowWifiCallingEmergencyCallWarning | Select **Yes** to show Wi-Fi emergency call warning.
 ShowWifiCallingError | Select **Yes** to show Wi-Fi calling error message.
+SlotSelectionSim1Name | Enter text for the name of SIM 1 in slot selection UI.
+SlotSelectionSim2Name | Enter text for the name of SIM 2 in slot selection UI.
 SuppressDePersoUI | Select **Yes** to hide the perso unlock UI.
 
 
@@ -318,6 +318,9 @@ ShowSpecificWifiCallingError | Select **Yes** to show a specific error message b
 ShowViewAPN | Select **Yes** to show the **View Internet APN** button in **Settings** > **cellular+SIM**.
 ShowWifiCallingEmergencyCallWarning | Select **Yes** to show Wi-Fi emergency call warning.
 ShowWifiCallingError | Select **Yes** to show Wi-Fi calling error message.
+SlotSelectionSim1Name | Enter text for the name of SIM 1 in slot selection UI.
+SlotSelectionSim2Name | Enter text for the name of SIM 2 in slot selection UI.
+SuppressDePersoUI | Suppress DePerso UI to unlock Perso.
 
 
 

windows/configuration/wcd/wcd-devicemanagement.md

@@ -18,10 +18,10 @@ Use to configure device management settings.
 
 | Setting   | Desktop editions | Mobile editions | Surface Hub | HoloLens | IoT Core |
 | --- | :---: | :---: | :---: | :---: | :---: |
-| [Accounts](#accounts) | X  | X | X | X |  |
+| [Accounts](#accounts) | X  | X | X |  |  |
-| [PGList](#pglist) | X  | X | X | X |  |
+| [PGList](#pglist) | X  | X | X |  |  |
-| [Policies](#policies) | X  | X | X | X |  |
+| [Policies](#policies) | X  | X | X |  |  |
-| [TrustedProvisioningSource](#trustedprovisioningsource) | X  | X | X | X |  |
+| [TrustedProvisioningSource](#trustedprovisioningsource) | X  | X | X |  |  |
 
 ## Accounts
 
@@ -76,12 +76,9 @@ The following table describes the settings you can configure for **Policies**.
 | Setting | Description |
 | --- | --- |
 | MMS > MMSMessageRoles | Select between **SECROLE_KNOWN_PPG**, **SECROLE_ANY_PUSH_SOURCE**, and **SECROLE_KNOWN_PPG_OR_SECROLE_ANY_PUSH_SOURCE**. If a message contains at least one of the roles in the selected role mask, then the message is processed.  |
-| OMACP > NetwpinRoles | Select a policy role to specify whether OMA network PIN-signed messages will be accepted. OMA Client Provisioning Network PIN policy determines whether the OMA network PIN signed message will be accepted. The message's role mask and the policy's role mask are combined using the AND operator. If the result is non-zero, then the message is accepted.</br></br>Available roles are: **SECROLE_OPERATOR_TIPS**, **SECROLE_KNOWN_PPG**, **SECROLE_OPERATOR_TPS_OR_SECROLE_KNOWN_PPG**, **SECROLE_ANY_PUSH_SOURCE**, **SECROLE_OPERATOR_TPS_OR_SECROLE_ANY_PUSH_SOURCE**, **SECROLE_KNOWN_PPG_OR_SECROLE_ANY_PUSH_SOURCE**, and **SECROLE_OPERATOR_TPS_OR_SECROLE_KNOWN_PPG_OR_SECROLE_ANY_PUSH_SOURCE**.</BR></br>**Note**  IMSI-based NETWPIN and USERNETWPIN may not work for dual SIM phones. The OMA-CP authentication provider only uses the IMSI from executor 0 (the current, active data SIM) when hashing these messages. OMA-CP payloads targeting executor 1 are rejected by the phone. For more information about executors, see Dual SIM. |
-| OMACP > UsernetwpinRoles | Select a policy role to specify whether the OMA user network PIN-signed message will be accepted. The message's role mask and the policy's role mask are combined using the AND operator. If the result is non-zero, then the message is accepted.</br></br>Available roles are: **SECROLE_OPERATOR_TIPS**, **SECROLE_KNOWN_PPG**, **SECROLE_OPERATOR_TPS_OR_SECROLE_KNOWN_PPG**, **SECROLE_ANY_PUSH_SOURCE**, **SECROLE_OPERATOR_TPS_OR_SECROLE_ANY_PUSH_SOURCE**, **SECROLE_KNOWN_PPG_OR_SECROLE_ANY_PUSH_SOURCE**, and **SECROLE_OPERATOR_TPS_OR_SECROLE_KNOWN_PPG_OR_SECROLE_ANY_PUSH_SOURCE**.</BR></br>**Note** IMSI-based NETWPIN and USERNETWPIN may not work for dual SIM phones. The OMA-CP authentication provider only uses the IMSI from executor 0 (the current, active data SIM) when hashing these messages. OMA-CP payloads targeting executor 1 are rejected by the phone. For more information about executors, see Dual SIM. |
-| OMACP > UserpinRoles | Select a policy role to specify whether the OMA user PIN or user MAC signed message will be accepted. OMA Client Provisioning User PIN policy determines whether the OMA user PIN or user MAC signed message will be accepted. The message's role mask and the policy's role mask are combined using the AND operator. If the result is non-zero, then the message is accepted.</br></br>Available roles are: **SECROLE_OPERATOR_TIPS**, **SECROLE_KNOWN_PPG**, **SECROLE_OPERATOR_TPS_OR_SECROLE_KNOWN_PPG**, **SECROLE_ANY_PUSH_SOURCE**, **SECROLE_OPERATOR_TPS_OR_SECROLE_ANY_PUSH_SOURCE**, **SECROLE_KNOWN_PPG_OR_SECROLE_ANY_PUSH_SOURCE**, and **SECROLE_OPERATOR_TPS_OR_SECROLE_KNOWN_PPG_OR_SECROLE_ANY_PUSH_SOURCE**. |
 | SISL > ServiceIndicationRoles | Specify the security roles that can accept SI messages. Service Indication (SI) Message policy indicates whether SI messages are accepted by specifying the security roles that can accept SI messages. An SI message is sent to the phone to notify users of new services, service updates, and provisioning services.</br></br>Available roles are: **SECROLE_KNOWN_PPG**, **SECROLE_ANY_PUSH_SOURCE**, and **SECROLE_KNOWN_PPG_OR_SECROLE_ANY_PUSH_SOURCE**. |
 | SISL > ServiceLoadingRoles | Specify the security roles that can accept SL messages. Service Loading (SL) Message policy indicates whether SL messages are accepted by specifying the security roles that can accept SL messages. An SL message downloads new services or provisioning XML to the phone.</br></br>Available roles are: **SECROLE_KNOWN_PPG**, **SECROLE_ANY_PUSH_SOURCE**, and **SECROLE_KNOWN_PPG_OR_SECROLE_ANY_PUSH_SOURCE**. |
-
+| WSP > WSPPushAllowed | Indicates whether Wireless Session Protocol (WSP) notifications from the WAP stack are routed.
 ## TrustedProvisioningSource
 
 In **PROVURL**, enter the URL for a Trusted Provisioning Server (TPS).

windows/configuration/wcd/wcd-firstexperience.md

@@ -12,5 +12,19 @@ ms.date: 09/06/2017
 
 # FirstExperience (Windows Configuration Designer reference)
 
-Do not configure **FirstExperience** in provisioning packages at this time. These settings will be available to configure the out-of-box experience (OOBE) to set up HoloLens in a future release. 
+Use these settings to configure the out-of-box experience (OOBE) to set up HoloLens. 
+
+## Applies to
+
+| Setting   | Desktop editions | Mobile editions | Surface Hub | HoloLens | IoT Core |
+| --- | :---: | :---: | :---: | :---: | :---: |
+| All settings |   |  |  | X |  |
+
+Setting | Description
+--- | ---
+PreferredRegion | Enter the [geographical location identifier](https://msdn.microsoft.com/en-us/library/windows/desktop/dd374073.aspx) for the region.
+PreferredTimezone | Enter the timezone. [Field calls for text?? Shouldn't it be index?](https://msdn.microsoft.com/en-us/library/ms912391.aspx)
+SkipCalibration | Initial setup of HoloLens includes a calibration step. Set to **True** to skip calibration.
+SkipTraining | Initial setup of HoloLens includes training on how to perform the gestures to operate HoloLens. Set to **True** to skip training. 
+SkipWifi | Set to **True** to skip connecting to a Wi-fi network.
 

windows/configuration/wcd/wcd-hotspot.md

@@ -47,6 +47,17 @@ If Enabled is initially set to **True**, the feature is turned off and the inter
 
 When Enabled is set to **False**, the internet sharing screen is added to Settings, although sharing is turned off by default until the user turns it on. 
 
+## EntitlementDll
+
+Enter the path to the entitlement DLL used to make entitlement checks that verify that the device is entitled to use the Internet sharing service on a mobile operator's network.
+
+## EntitlementInterval
+
+Enter the time interval, in seconds, between entitlement checks.
+
+## EntitlementRequired
+
+Specify whether the device requires an entitlement check to determine if Internet sharing should be enabled.
 
 ## MaxBluetoothUsers
 

windows/configuration/wcd/wcd-messaging.md

@@ -42,6 +42,10 @@ When configured as **True**, you set a LIFO message order. When configured as **
 
 Enable this setting to allow custom line setup dialogs in the Messaging app.
 
+### ExtractPhoneNumbersInStrings"
+
+Set as **True** to tag any 5-or-more digit number as a tappable phone number.
+
 ### ShowSendingStatus
 
 >[!NOTE]
@@ -144,6 +148,7 @@ CmasAMBERAlertEnabled | **True** enables the device to receive AMBER alerts
 CmasExtremeAlertEnabled | **True** enables the device to receive extreme alerts
 CmasSevereAlertEnabled | **True** enables the device to receive severe alerts
 EmOperatorEnabled | Select which Emergency Alerts Settings page is displayed from dropdown menu
+EtwsSoundEnabled | Set to **True** to play Earthquake & Tsunami Warning System (ETWS) sound during alert.
 SevereAlertDependentOnExtremeAlert | When set as **True**, the CMAS-Extreme alert option must be on to modify CMAS-Severe alert option
 
 
@@ -160,21 +165,29 @@ AutoRetryDownload | You can configure the messaging app to automatically retry d
 BroadcastChannels | You can specify one or more ports from which the device will accept cellular broadcast messages. Set the BroadcastChannels value to the port number(s) that can accept cellular broadcast messages. If you specify the same port that Windows 10 Mobile already recognizes as an Emergency Alert port (a CMAS or ETWS port number) and a cell broadcast message is received on that port, the user will only receive the message once. The message that is received will be displayed as an Emergency Alert message.
 ConvertLongSMStoMMS | For networks that do support MMS and do not support segmentation of SMS messages, you can specify an automatic switch from SMS to MMS for long messages.
 DefaultContentLocationUrl | For networks that require it, you can specify the default GET path within the MMSC to use when the GET URL is missing from the WAP push MMS notification. Set DefaultContentLocationUrl to specify the default GET path within the MMSC.
+EarthquakeMessageString | To override the Primary Earthquake default message, specify the EarthquakeMessageString setting value. This string will be used regardless of what language is set on the device.
+EarthquakeTsunamiMessageString| To override the Primary Tsunami and Earthquake default message, specify the EarthquakeTsunamiMessageString setting value. This string will be used regardless of what language is set on the device.
 ErrorCodeEnabled | You can choose to display additional content in the conversation view when an SMS or MMS message fails to send. This content includes a specific error code in decimal format that the user can report to technical support. Common errors also include a friendly string to help the user self-diagnose and fix the problem. Set to **True** to display the error message with an explanation of the problem and the decimal-format error codes. When set to **False**, the full error message is not displayed.
+EtwsSoundFileName | Set the value to the name of a sound file.
 HideMediumSIPopups | By default, when a service indication message is received with a signal-medium or signal-high setting, the phone interrupts and shows the user prompt for these messages. However, you can hide the user prompts for signal-medium messages.
 ImsiAuthenticationToken | Configure whether MMS messages include the IMSI in the GET and POST header. Set ImsiAuthenticationToken to the token used as the header for authentication. The string value should match the IMSI provided by the UICC.
 LimitRecipients | Set the maximum number of recipients to which a single SMS or MMS message can be sent. Enter a number between 1 and 500 to limit the maximum number of recipients.
 MaxRetryCount | You can specify the number of times that the phone can retry sending the failed MMS message and photo before the user receives a notification that the photo could not be sent. Specify MaxRetryCount to specify the number of times the MMS transport will attempt resending the MMS message. This value has a maximum limit of 3.
 MMSLimitAttachments | You can specify the maximum number of attachments for MMS messages, from 1 to 20. The default is 5.
+NIInfoEnabled | NIInfoEnabled
+ProxyAuthorizationToken | See [Proxy authorization for MMS.](https://docs.microsoft.com/windows-hardware/customize/mobile/mcsf/proxy-authorization-for-mms)
 RetrySize | For MMS messages that have photo attachments and that fail to send, you can choose to automatically resize the photo and attempt to resend the message. Specify the maximum size to use to resize the photo in KB. Minimum is 0xA (10 KB). 
 SetCacheControlNoTransform | When set, proxies and transcoders are instructed not to change the HTTP header and the content should not be modified. A value of 1 or 0x1 adds support for the HTTP header Cache-Control No-Transform directive. When the SetCacheControlNoTransform``Value is set to 0 or 0x0 or when the setting is not set, the default HTTP header Cache-Control No-Cache directive is used.
 ShowRequiredMonthlyTest | **True** enables devices to receive CMAS Required Monthly Test (RMT) messages and have these show up on the device. **False** disables devices from receiving CMAS RMT messages.
+SIProtocols | Additional supported service indication protocol name.
 SmscPanelDisabled | **True** disables the short message service center (SMSC) panel. 
 SMStoSMTPShortCode | Use to configure SMS messages to be sent to email addresses and phone numbers. `0` disables sending SMS messages to SMTP addresses. `1` enables sending SMS messages to SMTP addresses.
 TargetVideoFormat | You can specify the transcoding to use for video files sent as attachments in MMS messages. Set TargetVideoFormat to one of the following values to configure the default transcoding for video files sent as attachments in MMS messages:</br></br>- 0 or 0x0 Sets the transcoding to H.264 + AAC + MP4. This is the default set by the OS.</br>- 1 or 0x1 Sets the transcoding to H.264 + AAC + 3GP.</br>- 2 or 0x2 Sets the transcoding to H.263 + AMR.NB + 3GP.</br>- 3 or 0x3 Sets the transcoding to MPEG4 + AMR.NB + 3GP. 
+TsunamiMessageString | To override the Primary Tsunami default message, specify the TsunamiMessageString setting value. This string will be used regardless of what language is set on the device.
 UAProf | You can specify a user agent profile to use on the phone for MMS messages. The user agent profile XML file details a phone’s hardware specifications and media capabilities so that an MMS application server (MMSC) can return supported optimized media content to the phone. The user agent profile XML file is generally stored on the MMSC. There are two ways to correlate a user agent profile with a given phone:</br></br>- You can take the user agent string of the phone that is sent with MMS requests and use it as a hash to map to the user agent profile on the MMSC. The user agent string cannot be modified.</br>- Alternatively, you can directly set the URI of the user agent profile on the phone.</br></br>Set UAProf to the full URI of your user agent profile file. Optionally, you can also specify the custom user agent property name for MMS that is sent in the header by setting UAProfToken to either `x-wap-profile` or `profile`.
 UAProfToken | You can specify a user agent profile to use on the phone for MMS messages. The user agent profile XML file details a phone’s hardware specifications and media capabilities so that an MMS application server (MMSC) can return supported optimized media content to the phone. The user agent profile XML file is generally stored on the MMSC. 
 UseDefaultAddress | By default, the MMS transport sends an acknowledgement to the provisioned MMS application server (MMSC). However, on some networks, the correct server to use is sent as a URL in the MMS message. In that case, a registry key must be set, or else the acknowledgement will not be received and the server will continue to send duplicate messages. **True** enables some networks to correctly acknowledge MMS messages. **False** disables the feature.
+UseInsertAddressToken | Use insert address token or local raw address.
 UserAgentString | Set UserAgentString to the new user agent string for MMS in its entirely. By default, this string has the format WindowsPhoneMMS/MicrosoftMMSVersionNumber WindowsPhoneOS/OSVersion-buildNumber OEM-deviceName, in which the italicized text is replaced with the appropriate values for the phone.
 UseUTF8ForUnspecifiedCharset | Some incoming MMS messages may not specify a character encoding. To properly decode MMS messages that do not specify a character encoding, you can set UTF-8 to decode the message. 
 WapPushTechnology | For networks that require non-standard handling of single-segment incoming MMS WAP Push notifications, you can specify that MMS messages may have some of their content truncated and that they may require special handling to reconstruct truncated field values. `1` or `0x1` enables MMS messages to have some of their content truncated. `0` or `0x0` disables MMS messages from being truncated 
@@ -222,9 +235,14 @@ Set options for Rich Communications Services (RCS).
 
 | Setting | Description |
 | --- | --- |
+RcsAllowLeaveClosedGroupChats | Whether or not to allow users to leave closed group chats.
 | RcsEnabled | Toggle to enable/disable RCS service. Set to **True** to enable. |
 | RcsFileTransferAutoAccept | Set to **True** to auto-accept RCS incoming file transfer if the file size is less than warning file size.|
+RcsFiletransferAutoAcceptWhileRoaming | Auto-accept RCS incoming file transfer when the file size is less than the warning file size while roaming.
+RcsGroupChatCreationMode | The mode used to create new RCS group chats.
+RcsGroupChatCreationgThreadingMode | The mode used to thread newly created RCS group chats.
 | RcsSendReadReceipt | Set to **True** to send read receipt to the sender when a message is read.  |
+RcsTimeWindowsAfterSelfLeave | After RCS receives a self-left message, it will ignore messages during this time (in milliseconds), except self-join.
 | ShowRcsEnabled | Set to **True** to show the toggle for RCS activation.  |
 
 
@@ -262,6 +280,20 @@ Set TargetVideoFormat to one of the following values to configure the default tr
 | 3 or 0x3 | Sets the transcoding to MPEG4 + AMR.NB + 3GP. |
  
 
+### TaiwanAlertOptions
+
+Set options for Taiwan Emergency Alerts system. For more information, see [Emergency notifications](https://docs.microsoft.com/windows-hardware/customize/mobile/mcsf/emergency-notifications#taiwan-alerts). 
+
+
+Setting | Description
+--- | ---
+TaiwanAlertEnabled | Receive Taiwan alerts.
+TaiwanEmergencyAlertEnabled | Receive Taiwan emergency alerts.
+TaiwanPresidentialAlertEnabled | Receive Taiwan Presidential alerts.
+TaiwanRequiredMonthlytestEnabled | Receive Taiwan Required Monthly Test alerts.
+
+
+
 ### UAProf
 
 >[!NOTE]

windows/configuration/wcd/wcd-rcspresence.md

@@ -0,0 +1,29 @@
+---
+title: RcsPresence (Windows 10)
+description: This section describes the RcsPresence settings that you can configure in provisioning packages for Windows 10 using Windows Configuration Designer.
+ms.prod: w10
+ms.mktglfcycl: deploy
+ms.sitesec: library
+author: jdeckerMS
+ms.localizationpriority: medium
+ms.author: jdecker
+ms.date: 09/06/2017
+---
+
+# RcsPresence (Windows Configuration Designer reference)
+
+Use these settings to configure RcsPresence. 
+
+## Applies to
+
+| Setting   | Desktop editions | Mobile editions | Surface Hub | HoloLens | IoT Core |
+| --- | :---: | :---: | :---: | :---: | :---: |
+| All settings |   | X |  |  |  |
+
+Setting | Description
+--- | ---
+BypassvideoCapabilities | Do not use.
+MaxWaitForCapabilitiesRequestInSeconds | Maximum number of seconds to wait for a Capabilities Request to complete. 
+MinAvailabilityCacheInSeconds |  Number of seconds to cache result of Capabilities Request per each number, to avoid excessive network requests.
+
+

windows/configuration/wcd/wcd-windowsteamsettings.md

@@ -48,6 +48,11 @@ A device account is a Microsoft Exchange account that is connected with Skype fo
 | UserPrincipalName  | User principal name (UPN)  | To use a device account from Azure Active Directory or a hybrid deployment, you should specify the UPN of the device account.  |
 | ValidateAndCommit  | Any text | Validates the data provided and then commits the changes. This process occurs automatically after the other DeviceAccount settings are applied. The text you enter for the ValidateAndCommit setting doesn't matter. |
 
+## Dot3
+
+Use these settings to configure 802.1x wired authentication. For details, see [Enable 802.1x wired authentication](https://docs.microsoft.com/surface-hub/enable-8021x-wired-authentication).
+
+
 
 ## FriendlyName
 

windows/configuration/wcd/wcd.md

@@ -61,6 +61,7 @@ This section describes the settings that you can configure in [provisioning pack
 | [Personalization](wcd-personalization.md) | X |  |  |  |  |
 | [Policies](wcd-policies.md) | X | X | X | X | X |
 | [ProvisioningCommands](wcd-provisioningcommands.md) | X |  |  |  |  |
+[RcsPresence](wcd/wcd-rcspresence.md) |  | X |  |  |  |
 | [SharedPC](wcd-sharedpc.md) | X |  |  |  |  |
 | [Shell](wcd-shell.md) |  | X |  |  |  |
 | [SMISettings](wcd-smisettings.md) | X |  |  |  |  |