Non-Persistent VDI or RDSH.
User Experience Virtualization (UE-V), other UPM solutions or User Profile Disks (UPD).
|
-Non-Persistent VDI or RDSH. |
-
|
-User Experience Virtualization (UE-V), other UPM solutions or User Profile Disks (UPD). |
-
|
-User Experience Virtualization (UE-V) with the App-V user state template enabled or User Profile Management (UPM) software. Non-UE-V UPM software must be capable of triggering on Login or Process/Application Start and Logoff. |
-
|
-App-V Shared Content Store (SCS) is configured or can be configured. |
-
|
-Admin may need to update the VM base image regularly to ensure optimal performance or Admin may need to manage multiple images for different user groups. |
-
| Optimized for Performance | -Optimized for Storage | -
|---|---|
To provide the most optimal user experience, this approach leverages the capabilities of a UPM solution and requires additional image preparation and can incur some additional image management overhead. -The following describes many performance improvements in stateful non-persistent deployments. For more information, see Sequencing Steps to Optimize Packages for Publishing Performance later in this topic. |
-The general expectations of the previous scenario still apply here. However, keep in mind that VM images are typically stored in very costly arrays; a slight alteration has been made to the approach. Do not pre-configure user-targeted virtual application packages in the base image. -The impact of this alteration is detailed in the User Experience Walk-through section of this document. |
-
| Optimized for Performance | -Optimized for Storage | -
|---|---|
-
|
-
-
|
-
| Configuration Setting | -What does this do? | -How should I use it? | -
|---|---|---|
Shared Content Store (SCS) Mode -
|
-When running the shared content store only publishing data is maintained on hard disk; other virtual application assets are maintained in memory (RAM). -This helps to conserve local storage and minimize disk I/O per second (IOPS). |
-This is recommended when low-latency connections are available between the App-V Client endpoint and the SCS content server, SAN. |
-
PreserveUserIntegrationsOnLogin -
|
-If you have not pre-configured (Add-AppvClientPackage) a specific package and this setting is not configured, the App-V Client will de-integrate* the persisted user integrations, then re-integrate*. -For every package that meets the above conditions, effectively twice the work will be done during publishing/refresh. |
-If you don’t plan to pre-configure every available user package in the base image, use this setting. |
-
MaxConcurrentPublishingRefresh -
|
-This setting determines the number of users that can perform a publishing refresh/sync at the same time. The default setting is no limit. |
-Limiting the number of concurrent publishing refreshes prevents excessive CPU usage that could impact computer performance. This limit is recommended in an RDS environment, where multiple users can log in to the same computer at the same time and perform a publishing refresh sync. -If the concurrent publishing refresh threshold is reached, the time required to publish new applications and make them available to end users after they log in could take an indeterminate amount of time. |
-
| Optimized for Performance | -Optimized for Storage | -
|---|---|
After implementing this approach in the VDI/RDSH environment, on first login, -
On subsequent logins: -
¹ The publishing operation (Publish-AppVClientPackage) adds entries to the user catalog, maps entitlement to the user, identifies the local store, and finishes by completing any integration steps. |
-After implementing this approach in the VDI/RDSH environment, on first login, -
On subsequent logins: -
|
-
| Outcome | -Outcome | -
|---|---|
-
|
-Because the add/refresh must re-configure all the virtual applications to the VM, the publishing refresh time on every login will be extended. |
-
| Step | -Consideration | -Benefits | -Tradeoffs | -
|---|---|---|---|
No Feature Block 1 (FB1, also known as Primary FB) |
-No FB1 means the application will launch immediately and stream fault (application requires file, DLL and must pull down over the network) during launch. If there are network limitations, FB1 will: -
|
-Stream faulting decreases the launch time. |
-Virtual application packages with FB1 configured will need to be re-sequenced. |
-
| Step | -Considerations | -Benefits | -Tradeoffs | -
|---|---|---|---|
No SXS Install at Publish (Pre-Install SxS assemblies) |
-Virtual Application packages do not need to be re-sequenced. SxS Assemblies can remain in the virtual application package. |
-The SxS Assembly dependencies will not install at publishing time. |
-SxS Assembly dependencies must be pre-installed. |
-
| Step | -Considerations | -Benefits | -Tradeoffs | -
|---|---|---|---|
Selectively Employ Dynamic Configuration files |
-The App-V client must parse and process these Dynamic Configuration files. -Be conscious of size and complexity (script execution, VREG inclusions/exclusions) of the file. -Numerous virtual application packages may already have User- or computer–specific dynamic configurations files. |
-Publishing times will improve if these files are used selectively or not at all. |
-Virtual application packages would need to be reconfigured individually or via the App-V server management console to remove associated Dynamic Configuration files. |
-
| Step | -Considerations | -Benefits | -Tradeoffs | -
|---|---|---|---|
Account for Synchronous Script Execution during Package Lifecycle. |
-If script collateral is embedded in the package, Add cmdlets may be significantly slower. -Running of scripts during virtual application launch (StartVirtualEnvironment, StartProcess) and/or Add+Publish will impact the perceived performance during one or more of these lifecycle operations. |
-Use of Asynchronous (Non-Blocking) Scripts will ensure that the lifecycle operations complete efficiently. |
-This step requires working knowledge of all virtual application packages with embedded script collateral, which have associated dynamic configurations files and which reference and run scripts synchronously. |
-
Remove Extraneous Virtual Fonts from Package. |
-The majority of applications investigated by the App-V product team contained a small number of fonts, typically fewer than 20. |
-Virtual Fonts impact publishing refresh performance. |
-Desired fonts will need to be enabled/installed natively. For instructions, see Install or uninstall fonts. |
-
| Home | -Pro | -Business | -Enterprise | -Education | -Mobile | -
|---|---|---|---|---|---|
| No | -No | -No | -No | -No | -No | -
| Home | -Pro | -Business | -Enterprise | -Education | -Mobile | -
|---|---|---|---|---|---|
| No | -Yes | -Yes | -Yes | -Yes | -No | -
| Home | -Pro | -Business | -Enterprise | -Education | -Mobile | -
|---|---|---|---|---|---|
| Yes | -Yes | -Yes | -Yes | -Yes | -Yes | -
| Home | -Pro | -Business | -Enterprise | -Education | -Mobile | -
|---|---|---|---|---|---|
| No | -No | -No | -No | -No | -No | -
| Home | -Pro | -Business | -Enterprise | -Education | -Mobile | -
|---|---|---|---|---|---|
| Yes | -Yes | -Yes | -Yes | -Yes | -Yes | -
| Home | -Pro | -Business | -Enterprise | -Education | -Mobile | -
|---|---|---|---|---|---|
| Yes6 | -Yes6 | -Yes6 | -Yes6 | -Yes6 | -Yes6 | -
| Home | -Pro | -Business | -Enterprise | -Education | -Mobile | -
|---|---|---|---|---|---|
| Yes | -Yes | -Yes | -Yes | -Yes | -Yes | -
| Home | -Pro | -Business | -Enterprise | -Education | -Mobile | -
|---|---|---|---|---|---|
| No | -Yes3 | -Yes | -Yes | -Yes | -No | -
| Home | -Pro | -Business | -Enterprise | -Education | -Mobile | -
|---|---|---|---|---|---|
| Yes | -Yes | -Yes | -Yes | -Yes | -Yes | -
| Home | -Pro | -Business | -Enterprise | -Education | -Mobile | -
|---|---|---|---|---|---|
| No | -Yes5 | -Yes2 | -Yes2 | -Yes2 | -Yes2 | -
| Home | -Pro | -Business | -Enterprise | -Education | -Mobile | -
|---|---|---|---|---|---|
| No | -No | -No | -No | -No | -No | -
| Home | -Pro | -Business | -Enterprise | -Education | -Mobile | -
|---|---|---|---|---|---|
| Yes3 | -Yes3 | -Yes3 | -Yes3 | -Yes3 | -Yes | -
| Home | -Pro | -Business | -Enterprise | -Education | -Mobile | -
|---|---|---|---|---|---|
| No | -No | -No | -No | -No | -Yes1 | -
| Home | -Pro | -Business | -Enterprise | -Education | -Mobile | -
|---|---|---|---|---|---|
| Yes2 | -Yes2 | -Yes2 | -Yes2 | -Yes2 | -Yes | -
| Home | -Pro | -Business | -Enterprise | -Education | -Mobile | -
|---|---|---|---|---|---|
| Yes3 | -Yes3 | -Yes3 | -Yes3 | -Yes3 | -Yes | -
| Home | -Pro | -Business | -Enterprise | -Education | -Mobile | -
|---|---|---|---|---|---|
| Yes2 | -Yes2 | -Yes2 | -Yes2 | -Yes2 | -Yes | -
| Home | -Pro | -Business | -Enterprise | -Education | -Mobile | -
|---|---|---|---|---|---|
| Yes | -Yes | -Yes | -Yes | -Yes | -Yes | -
| Home | -Pro | -Business | -Enterprise | -Education | -Mobile | -
|---|---|---|---|---|---|
| No | -No | -Yes2 | -Yes2 | -Yes2 | -No | -
| Home | -Pro | -Business | -Enterprise | -Education | -Mobile | -
|---|---|---|---|---|---|
| Yes | -Yes | -Yes | -Yes | -Yes | -Yes | -
| Home | -Pro | -Business | -Enterprise | -Education | -Mobile | -
|---|---|---|---|---|---|
| No | -No | -No | -No | -No | -No | -
| Home | -Pro | -Business | -Enterprise | -Education | -Mobile | -
|---|---|---|---|---|---|
| Yes | -Yes | -Yes | -Yes | -Yes | -Yes | -
| Home | -Pro | -Business | -Enterprise | -Education | -Mobile | -
|---|---|---|---|---|---|
| Yes | -Yes | -Yes | -Yes | -Yes | -Yes | -
| Home | -Pro | -Business | -Enterprise | -Education | -Mobile | -
|---|---|---|---|---|---|
| Yes | -Yes | -Yes | -Yes | -Yes | -No | -
| Home | -Pro | -Business | -Enterprise | -Education | -Mobile | -
|---|---|---|---|---|---|
| Yes | -Yes | -Yes | -Yes | -Yes | -Yes | -
| Home | -Pro | -Business | -Enterprise | -Education | -Mobile | -
|---|---|---|---|---|---|
| Yes | -Yes | -Yes | -Yes | -Yes | -Yes | -
| Home | -Pro | -Business | -Enterprise | -Education | -Mobile | -
|---|---|---|---|---|---|
| No | -No | -No | -No | -No | -No | -
| Home | -Pro | -Business | -Enterprise | -Education | -Mobile | -
|---|---|---|---|---|---|
| No | -No | -No | -No | -No | -Yes | -
| Home | -Pro | -Business | -Enterprise | -Education | -Mobile | -
|---|---|---|---|---|---|
| No | -No | -No | -No | -No | -Yes | -
| Home | -Pro | -Business | -Enterprise | -Education | -Mobile | -
|---|---|---|---|---|---|
| Yes | -Yes | -Yes | -Yes | -Yes | -Yes | -
| Home | -Pro | -Business | -Enterprise | -Education | -Mobile | - -
|---|---|---|---|---|---|
| Yes | -Yes | -Yes | -Yes | -Yes | -Yes | -
| Home | -Pro | -Business | -Enterprise | -Education | -Mobile | -
|---|---|---|---|---|---|
| Yes | -Yes | -Yes | -Yes | -Yes | -Yes | -
| Home | -Pro | -Business | -Enterprise | -Education | -Mobile | - -
|---|---|---|---|---|---|
| No | -No | -No | -Yes2 | -Yes2 | -Yes3 | -
| Home | -Pro | -Business | -Enterprise | -Education | -Mobile | -
|---|---|---|---|---|---|
| Yes | -Yes | -Yes | -Yes | -Yes | -Yes | -
| Home | -Pro | -Business | -Enterprise | -Education | -Mobile | -
|---|---|---|---|---|---|
| Yes6 | -Yes6 | -Yes6 | -Yes6 | -Yes6 | -No | -
| Home | -Pro | -Business | -Enterprise | -Education | -Mobile | -
|---|---|---|---|---|---|
| Yes2 | -Yes2 | -Yes2 | -Yes2 | -Yes2 | -Yes | -
| Home | -Pro | -Business | -Enterprise | -Education | -Mobile | -
|---|---|---|---|---|---|
| No | -No | -No | -No | -No | -Yes | -
| Home | -Pro | -Business | -Enterprise | -Education | -Mobile | -
|---|---|---|---|---|---|
| No | -No | -No | -Yes2 | -Yes2 | -No | -
| Home | -Pro | -Business | -Enterprise | -Education | -Mobile | -
|---|---|---|---|---|---|
| No | -No | -No | -No | -No | -Yes | -
| Home | -Pro | -Business | -Enterprise | -Education | -Mobile | -
|---|---|---|---|---|---|
| Yes -Only for mobile application management (MAM) | -Yes | -Yes | -Yes | -Yes | -Yes | -
| Home | -Pro | -Business | -Enterprise | -Education | -Mobile | -
|---|---|---|---|---|---|
| No | -Yes | -Yes | -Yes | -Yes | -No | -
| Home | -Pro | -Business | -Enterprise | -Education | -Mobile | -
|---|---|---|---|---|---|
| No | -No | -No | -No | -No | -Yes | -
| Home | -Pro | -Business | -Enterprise | -Education | -Mobile | -
|---|---|---|---|---|---|
| No | -No | -No | -No | -No | -Yes | -
| Home | -Pro | -Business | -Enterprise | -Education | -Mobile | -
|---|---|---|---|---|---|
| Yes | -Yes | -Yes | -Yes | -Yes | -Yes | -
| Home | -Pro | -Business | -Enterprise | -Education | -Mobile | -
|---|---|---|---|---|---|
| No | -Yes3 | -Yes3 | -Yes3 | -Yes3 | -Yes3 | -
| Home | -Pro | -Business | -Enterprise | -Education | -Mobile | -
|---|---|---|---|---|---|
| No | -No | -No | -No | -No | -YesB | -
| Home | -Pro | -Business | -Enterprise | -Education | -Mobile | -
|---|---|---|---|---|---|
| No | -Yes3 | -Yes3 | -Yes3 | -Yes3 | -No | -
| Home | -Pro | -Business | -Enterprise | -Education | -Mobile | -
|---|---|---|---|---|---|
| Yes | -Yes | -Yes | -Yes | -Yes | -Yes | -
| Home | -Pro | -Business | -Enterprise | -Education | -Mobile | -
|---|---|---|---|---|---|
| No | -Yes | -Yes | -Yes | -Yes | -Yes | -
| Home | -Pro | -Business | -Enterprise | -Education | -Mobile | -Mobile Enterprise | -
|---|---|---|---|---|---|---|
| Yes | -Yes | -No | -Yes | -Yes | -No | -No | -
| Home | -Pro | -Business | -Enterprise | -Education | -Mobile | -
|---|---|---|---|---|---|
| No | -No | -No | -No | -No | -Yes | -
| Home | -Pro | -Business | -Enterprise | -Education | -Mobile | -
|---|---|---|---|---|---|
| No | -No | -No | -No | -No | -Yes2 | -
| Home | -Pro | -Business | -Enterprise | -Education | -Mobile | -
|---|---|---|---|---|---|
| Yes | -Yes | -Yes | -Yes | -Yes | -Yes | -
| Home | -Pro | -Business | -Enterprise | -Education | -Mobile | -
|---|---|---|---|---|---|
| No | -Yes | -Yes | -Yes | -Yes | -Yes | -
| Home | -Pro | -Business | -Enterprise | -Education | -Mobile | -
|---|---|---|---|---|---|
| No | -Yes | -Yes | -Yes | -Yes | -Yes | -
| Home | -Pro | -Business | -Enterprise | -Education | -Mobile | -
|---|---|---|---|---|---|
| No | -Yes2 | -Yes2 | -Yes2 | -Yes2 | -Yes2 | -
| Home | -Pro | -Business | -Enterprise | -Education | -Mobile | -
|---|---|---|---|---|---|
| Yes | -Yes | -Yes | -Yes | -Yes | -Yes | -
| Home | -Pro | -Business | -Enterprise | -Education | -Mobile | -
|---|---|---|---|---|---|
| Yes | -Yes | -Yes | -Yes | -Yes | -Yes | -
| Home | -Pro | -Business | -Enterprise | -Education | -Mobile | -
|---|---|---|---|---|---|
| No | -Yes2 | -Yes2 | -Yes2 | -Yes2 | -No | -
| Home | -Pro | -Business | -Enterprise | -Education | -Mobile | -
|---|---|---|---|---|---|
| Yes | -Yes | -Yes | -Yes | -Yes | -Yes | -
| Home | -Pro | -Business | -Enterprise | -Education | -Mobile | -
|---|---|---|---|---|---|
| No | -Yes | -Yes | -Yes | -Yes | -Yes | -
| Home | -Pro | -Business | -Enterprise | -Education | -Mobile | -
|---|---|---|---|---|---|
| Yes | -Yes | -Yes | -Yes | -Yes | -Yes | -
| Home | -Pro | -Business | -Enterprise | -Education | -Mobile | -
|---|---|---|---|---|---|
| No | -No | -No | -Yes2 | -Yes2 | -No | -
| Home | -Pro | -Business | -Enterprise | -Education | -Mobile | -
|---|---|---|---|---|---|
| Yes | -Yes | -Yes | -Yes | -Yes | -Yes | -
| Home | -Pro | -Business | -Enterprise | -Education | -Mobile | -
|---|---|---|---|---|---|
| No | -No | -No | -No | -No | -Yes | -
| Home | -Pro | -Business | -Enterprise | -Education | -Mobile | -
|---|---|---|---|---|---|
| YesB | -YesB | -YesB | -YesB | -YesB | -YesB | -
| Home | -Pro | -Business | -Enterprise | -Education | -Mobile | -
|---|---|---|---|---|---|
| No | -Yes | -Yes | -Yes | -Yes | -Yes | -
| Home | -Pro | -Business | -Enterprise | -Education | -Mobile | -
|---|---|---|---|---|---|
| No | -No | -No | -No | -No | -Yes | -
| Home | -Pro | -Business | -Enterprise | -Education | -Mobile | -
|---|---|---|---|---|---|
| No | -Yes | -Yes | -Yes | -Yes | -Yes | -
| Home | -Pro | -Business | -Enterprise | -Education | -Mobile | -
|---|---|---|---|---|---|
| No | -No | -No | -No | -No | -Yes | -
| Home | -Pro | -Business | -Enterprise | -Education | -Mobile | -
|---|---|---|---|---|---|
| No | -No | -No | -No | -No | -Yes | -
| Home | -Pro | -Business | -Enterprise | -Education | -Mobile | -
|---|---|---|---|---|---|
| Yes | -Yes | -Yes | -Yes | -Yes | -Yes | -
| Home | -Pro | -Business | -Enterprise | -Education | -Mobile | -
|---|---|---|---|---|---|
| Yes | -Yes | -Yes | -Yes | -Yes | -Yes | -
| Home | -Pro | -Business | -Enterprise | -Education | -Mobile | -
|---|---|---|---|---|---|
| Yes | -Yes | -Yes | -Yes | -Yes | -Yes | -
| Home | -Pro | -Business | -Enterprise | -Education | -Mobile | -
|---|---|---|---|---|---|
| No | -Yes | -Yes | -Yes | -Yes | -Yes | -
| Home | -Pro | -Business | -Enterprise | -Education | -Mobile | -
|---|---|---|---|---|---|
| No | -Yes1 | -Yes1 | -Yes1 | -Yes1 | -No | -
| Home | -Pro | -Business | -Enterprise | -Education | -Mobile | -
|---|---|---|---|---|---|
| Yes | -Yes | -Yes | -Yes | -Yes | -Yes | -
| Home | -Pro | -Business | -Enterprise | -Education | -Mobile | -
|---|---|---|---|---|---|
| No | -Yes1 | -Yes1 | -Yes1 | -Yes1 | -No | -
| Home | -Pro | -Business | -Enterprise | -Education | -Mobile | -
|---|---|---|---|---|---|
| No | -Yes | -Yes | -Yes | -Yes | -Yes | -
| Home | -Pro | -Business | -Enterprise | -Education | -Mobile | -|
|---|---|---|---|---|---|---|
| - | - | - | - | - | - | - |
| Home | -Pro | -Business | -Enterprise | -Education | -Mobile | -
|---|---|---|---|---|---|
| No | -Yes5 | -Yes5 | -Yes5 | -Yes5 | -No | -
| Home | -Pro | -Business | -Enterprise | -Education | -Mobile | -
|---|---|---|---|---|---|
| No | -Yes | -Yes | -Yes | -Yes | -Yes | -
| Home | -Pro | -Business | -Enterprise | -Education | -Mobile | -
|---|---|---|---|---|---|
| No | -Yes | -Yes | -Yes | -Yes | -No | -
| Home | -Pro | -Business | -Enterprise | -Education | -Mobile | -
|---|---|---|---|---|---|
| No | -No | -Yes | -Yes | -Yes | -No | -
| Home | -Pro | -Business | -Enterprise | -Education | -Mobile | -
|---|---|---|---|---|---|
| Yes | -Yes | -Yes | -Yes | -Yes | -Yes | -
| Home | -Pro | -Business | -Enterprise | -Education | -Mobile | -
|---|---|---|---|---|---|
| No | -No | -No | -No | -No | -Yes | -
| Home | -Pro | -Business | -Enterprise | -Education | -Mobile | -
|---|---|---|---|---|---|
| Yes | -Yes | -Yes | -Yes | -Yes | -Yes | -
| Home | -Pro | -Business | -Enterprise | -Education | -Mobile | -|
|---|---|---|---|---|---|---|
| - | - | - | - | - | Yes | -- |
| Home | -Pro | -Business | -Enterprise | -Education | -Mobile | -
|---|---|---|---|---|---|
| Yes | -Yes | -Yes | -Yes | -Yes | -Yes | -
| Home | -Pro | -Business | -Enterprise | -Education | -Mobile | -
|---|---|---|---|---|---|
| No | -Yes1 | -Yes1 | -Yes1 | -Yes1 | -No | -
| Home | -Pro | -Business | -Enterprise | -Education | -Mobile | -
|---|---|---|---|---|---|
| No | -Yes5 | -Yes5 | -Yes5 | -Yes5 | -No | -
| Home | -Pro | -Business | -Enterprise | -Education | -Mobile | -
|---|---|---|---|---|---|
| No | -Yes1 | -Yes1 | -Yes1 | -Yes1 | -No | -
| Home | -Pro | -Business | -Enterprise | -Education | -Mobile | -
|---|---|---|---|---|---|
| No | -Yes3 | -Yes3 | -Yes3 | -Yes3 | -No | > -
| Home | -Pro | -Business | -Enterprise | -Education | -Mobile | -
|---|---|---|---|---|---|
| Yes | -Yes | -Yes | -Yes | -Yes | -Yes | -
| Home | -Pro | -Business | -Enterprise | -Education | -Mobile | -
|---|---|---|---|---|---|
| No | -No | -No | -No | -No | -Yes | -
| Home | -Pro | -Business | -Enterprise | -Education | -Mobile | -
|---|---|---|---|---|---|
| No | -Yes5 | -Yes5 | -Yes5 | -Yes5 | -Yes5 | -
| Home | -Pro | -Business | -Enterprise | -Education | -Mobile | -
|---|---|---|---|---|---|
| - | - | - | - | - | Yes | -
| Name | -Type | -Description | -
|---|---|---|
type |
-string |
-LegacyWindowStoreProductId, LegacyWindowsPhoneProductId, RedirectToThresholdProductId |
-
value |
-string |
-- |
| Name | -Type | -
|---|---|
seatDetails |
-collection of SeatDetails |
-
failedSeatOperations |
-collection of FailedSeatRequest |
-
| Name | -Type | -
|---|---|
failureReason |
-string |
-
productKey |
-- |
userName |
-string |
-
| Name | -Type | -Description | -
|---|---|---|
packageId |
-string |
-- |
contentId |
-string |
-Identifies a specific application. |
-
location |
-- | - |
packageFullName |
-string |
-- |
packageIdentityName |
-string |
-- |
architectures |
-collection of ProductArchitectures |
-- |
packageFormat |
-- | - |
platforms |
-collection of ProductPlatform |
-- |
fileSize |
-integer-64 |
-Size of the file. |
-
packageRank |
-integer-32 |
-Optional |
-
| Name | -Description | -
|---|---|
open |
-Open distribution policy - licenses/seats can be assigned/consumed without limit |
-
restricted |
-Restricted distribution policy - licenses/seats must be assigned/consumed according to the available count |
-
| Name | -Type | -Description | -
|---|---|---|
productKey |
-- | Identifier used on subsequent requests to get additional content including product descriptions, offline license, and download URLs. |
-
seatCapacity |
-integer-64 |
-Total number of seats that have been purchased for an application. |
-
availableSeats |
-integer-64 |
-Number of available seats remaining for an application. |
-
lastModified |
-dateTime |
-Specifies the last modified date for an application. Modifications for an application includes updated product details, updates to an application, and updates to the quantity of an application. |
-
licenseType |
-- | Indicates whether the set of seats for a given application supports online or offline licensing. |
-
distributionPolicy |
-- | - |
status |
-- | - |
| Name | -Type | -Description | -
|---|---|---|
continuationToken |
-string |
-Only available if there is a next page. |
-
inventoryEntries |
-collection of InventoryEntryDetails |
-- |
| Name | -Description | -
|---|---|
active |
-Entry is available in the organization’s inventory. |
-
removed |
-Entry has been removed from the organization’s inventory. |
-
| Name | -Description | -
|---|---|
online |
-Online license application. |
-
offline |
-Offline license application. |
-
| Name | -Type | -Description | -
|---|---|---|
language |
-string |
-Language or fallback language if the specified language is not available. |
-
displayName |
-string |
-Display name of the application. |
-
description |
-string |
-App description provided by developer can be up to 10,000 characters. |
-
images |
-collection of ProductImage |
-Artwork and icon associated with the application. |
-
publisher |
-- | Publisher of the application. |
-
| Name | -Type | -Description | -
|---|---|---|
productKey |
-- | Identifies a set of seats associated with an application. |
-
licenseBlob |
-string |
-Base-64 encoded offline license that can be installed via a CSP. |
-
licenseInstanceId |
-string |
-Version of the license. |
-
requestorId |
-string |
-Organization requesting the license. |
-
contentId |
-string |
-Identifies the specific license required by an application. |
-
| Name | -Type | -
|---|---|
productPlatforms |
-collection of ProductPlatform |
-
packageFormat |
-string |
-
| Name | -Type | -Description | -
|---|---|---|
url |
-URI |
-CDN location of the packages. URL expiration is based on the estimated time to download the package. |
-
| Name | -
|---|
neutral |
-
arm |
-
x86 |
-
x64 |
-
| Name | -Type | -Description | -
|---|---|---|
productKey |
-- | Identifier used on subsequent requests to get additional content including product descriptions, offline license, and download URLs. |
-
productType |
-string |
-Type of product. |
-
supportedLanguages |
-collection of string |
-The set of localized languages for an application. |
-
publisherId |
-string |
-Publisher identifier. |
-
category |
-string |
-Application category. |
-
alternateIds |
-collection of AlternateIdentifier |
-The identifiers that can be used to instantiate the installation of on online application. |
-
packageFamilyName |
-string |
-- |
supportedPlatforms |
-collection of ProductPlatform |
-- |
| Name | -Type | -Description | -
|---|---|---|
location |
-URI |
-Location of the download image. |
-
purpose |
-string |
-Tag for the purpose of the image, e.g. "screenshot" or "logo". |
-
height |
-string |
-Height of the image in pixels. |
-
width |
-string |
-Width of the image in pixels. |
-
caption |
-string |
-Unlimited length. |
-
backgroundColor |
-string |
-Format "#RRGGBB" |
-
foregroundColor |
-string |
-Format "#RRGGBB" |
-
fileSize |
-integer-64 |
-Size of the file. |
-
| Name | -Type | -Description | -
|---|---|---|
productId |
-string |
-Product identifier for an application that is used by the Store for Business. |
-
skuId |
-string |
-Product identifier that specifies a specific SKU of an application. |
-
| Name | -Type | -Description | -
|---|---|---|
frameworkDependencyPackages |
-collection of FrameworkPackageDetails |
-- |
packageId |
-string |
-- |
contentId |
-string |
-Identifies a specific application. |
-
location |
-- | - |
packageFullName |
-string |
-example, Microsoft.BingTranslator_1.1.10917.2059_x86__8wekyb3d8bbwe |
-
packageIdentityName |
-string |
-example, Microsoft.BingTranslator |
-
architectures |
-collection of ProductArchitectures |
-Values {x86, x64, arm, neutral} |
-
packageFormat |
-- | Extension of the package file. |
-
platforms |
-collection of ProductPlatform |
-- |
fileSize |
-integer-64 |
-Size of the file. |
-
packageRank |
-integer-32 |
-Optional |
-
| Name | -
|---|
appx |
-
appxBundle |
-
xap |
-
| Name | -Type | -Description | -
|---|---|---|
packageSetId |
-string |
-An identifier for the particular combination of application packages. |
-
productPackages |
-collection of ProductPackageDetails |
-A collection of application packages. |
-
| Name | -Type | -
|---|---|
platformName |
-string |
-
minVersion |
-- |
maxTestedVersion |
-- |
| Name | -Type | -Description | -
|---|---|---|
publisherName |
-string |
-Name of the publisher. |
-
publisherWebsite |
-string |
-Website of the publisher. |
-
| Name | -
|---|
assign |
-
reclaim |
-
| Name | -Type | -Description | -
|---|---|---|
assignedTo |
-string |
-Format = UPN (user@domain) |
-
dateAssigned |
-datetime |
-- |
state |
-- | - |
productKey |
-- | - |
| Name | -Type | -
|---|---|
seats |
-collection of SeatDetails |
-
continuationToken |
-string |
-
| Name | -
|---|
active |
-
revoked |
-
| Name | -Type | -
|---|---|
platformName |
-string |
-
minVersion |
-- |
maxTestedVersion |
-- |
architectures |
-collection of ProductArchitectures |
-
| Name | -Type | -
|---|---|
major |
-integer-32 |
-
minor |
-integer-32 |
-
build |
-integer-32 |
-
revision |
-integer-32 |
-
| Update category | -Maximum deferral | -Deferral increment | -Update type/notes | -
|---|---|---|---|
OS upgrade |
-8 months |
-1 month |
-Upgrade - 3689BDC8-B205-4AF4-8D4A-A63924C5E9D5 |
-
Update |
-1 month |
-1 week |
-
-Note
-If a machine has Microsoft Update enabled, any Microsoft Updates in these categories will also observe Defer / Pause logic.
-
-
|
-
Other/cannot defer |
-No deferral |
-No deferral |
-Any update category not enumerated above falls into this category. -Definition Update - E0789628-CE08-4437-BE74-2495B842F43B |
-
| GPO key | -Type | -Value | -
|---|---|---|
BranchReadinessLevel |
-REG_DWORD |
-16: systems take Feature Updates on the Current Branch (CB) train -32: systems take Feature Updates on the Current Branch for Business -Other value or absent: receive all applicable updates (CB) |
-
DeferQualityUpdates |
-REG_DWORD |
-1: defer quality updates -Other value or absent: don’t defer quality updates |
-
DeferQualityUpdatesPeriodInDays |
-REG_DWORD |
-0-30: days to defer quality updates |
-
PauseQualityUpdates |
-REG_DWORD |
-1: pause quality updates -Other value or absent: don’t pause quality updates |
-
DeferFeatureUpdates |
-REG_DWORD |
-1: defer feature updates -Other value or absent: don’t defer feature updates |
-
DeferFeatureUpdatesPeriodInDays |
-REG_DWORD |
-0-180: days to defer feature updates |
-
PauseFeatureUpdates |
-REG_DWORD |
-1: pause feature updates -Other value or absent: don’t pause feature updates |
-
ExcludeWUDriversInQualityUpdate |
-REG_DWORD |
-1: exclude WU drivers -Other value or absent: offer WU drivers |
-
| Schedule name | -Schedule set by the server | -Actual value queried on device | -
|---|---|---|
IntervalForFirstSetOfRetries |
-15 |
-15 |
-
NumberOfFirstRetries |
-5 |
-5 |
-
IntervalForSecondSetOfRetries |
-60 |
-60 |
-
NumberOfSecondRetries |
-10 |
-10 |
-
IntervalForRemainingScheduledRetries |
-1440 |
-1440 |
-
NumberOfRemainingScheduledRetries |
-0 |
-0 |
-
| Schedule name | -Schedule set by the server | -Actual value queried on device | -
|---|---|---|
IntervalForFirstSetOfRetries |
-15 |
-15 |
-
NumberOfFirstRetries |
-5 |
-5 |
-
IntervalForSecondSetOfRetries |
-60 |
-60 |
-
NumberOfSecondRetries |
-10 |
-10 |
-
IntervalForRemainingScheduledRetries |
-0 |
-0 |
-
NumberOfRemainingScheduledRetries |
-0 |
-0 |
-
| Schedule name | -Schedule set by the server | -Actual value queried on device | -
|---|---|---|
IntervalForFirstSetOfRetries |
-0 |
-0 |
-
NumberOfFirstRetries |
-0 |
-0 |
-
IntervalForSecondSetOfRetries |
-0 |
-0 |
-
NumberOfSecondRetries |
-0 |
-0 |
-
IntervalForRemainingScheduledRetries |
-0 |
-0 |
-
NumberOfRemainingScheduledRetries |
-0 |
-0 |
-
| Schedule name | -Schedule set by server | -Actual schedule set on device | -Actual experience | -
|---|---|---|---|
IntervalForFirstSetOfRetries |
-15 |
-15 |
-Device polls |
-
NumberOfFirstRetries |
-5 |
-5 |
-Device polls |
-
IntervalForSecondSetOfRetries |
-1440 |
-1440 |
-Device polls the server once in 24 hours |
-
NumberOfSecondRetries |
-0 |
-0 |
-Device polls the server once in 24 hours |
-
IntervalForRemainingScheduledRetries |
-1440 |
-0 |
-Third schedule is disabled |
-
NumberOfRemainingScheduledRetries |
-0 |
-0 |
-Third schedule is disabled |
-
| Status | -Description | -
|---|---|
0 |
-Success |
-
1 |
-Failure: invalid PFN |
-
2 |
-Failure: invalid or expired device authentication with MSA |
-
3 |
-Failure: WNS client registration failed due to an invalid or revoked PFN |
-
4 |
-Failure: no Channel URI assigned |
-
5 |
-Failure: Channel URI has expired |
-
6 |
-Failure: Channel URI failed to be revoked |
-
7 |
-Failure: push notification received, but unable to establish an OMA-DM session due to power or connectivity limitations. |
-
8 |
-Unknown error |
-
| Return code | -Description | -
|---|---|
CONFIG_E_OBJECTBUSY |
-Another instance of the configuration management service is currently running. |
-
CONFIG_E_ENTRYNOTFOUND |
-No metabase entry was found. |
-
CONFIG_E_CSPEXCEPTION |
-An exception occurred in one of the configuration service providers. |
-
CONFIG_E_TRANSACTIONINGFAILURE |
-A configuration service provider failed to roll back properly. The affected settings might be in an unknown state. |
-
CONFIG_E_BAD_XML |
-The XML input is invalid or malformed. |
-
Minimum supported client |
-None supported |
-
Minimum supported server |
-None supported |
-
Minimum supported phone |
-Windows Phone 8.1 |
-
Header |
-Dmprocessxmlfiltered.h |
-
Library |
-Dmprocessxmlfiltered.lib |
-
DLL |
-Dmprocessxmlfiltered.dll |
-
0: CONFIRM |
-Waiting for confirmation from user. |
-
1: QUEUED |
-Waiting for download to start. |
-
2: DOWNLOADING |
-In the process of downloading. |
-
3: DOWNLOADED |
-Waiting for installation to start. |
-
4: INSTALLING |
-Handed off for installation. |
-
5: INSTALLED |
-Successfully installed |
-
6: FAILED |
-Application was rejected (not signed properly, bad XAP format, not enrolled properly, etc.) |
-
7:DOWNLOAD_FAILED |
-Unable to connect to server, file doesn't exist, etc. |
-
| Value | -Description | -
|---|---|
0 |
-Lime |
-
1 |
-Green |
-
2 |
-Emerald |
-
3 |
-Teal (Viridian) |
-
4 |
-Cyan (Blue) |
-
5 |
-Cobalt |
-
6 |
-Indigo |
-
7 |
-Violet (Purple) |
-
8 |
-Pink |
-
9 |
-Magenta |
-
10 |
-Crimson |
-
11 |
-Red |
-
12 |
-Orange (Mango) |
-
13 |
-Amber |
-
14 |
-Yellow |
-
15 |
-Brown |
-
16 |
-Olive |
-
17 |
-Steel |
-
18 |
-Mauve |
-
19 |
-Sienna |
-
101 through 104 |
-Optional colors, as defined by the OEM |
-
151 |
-Custom accent color for Enterprise |
-
| Value | -Time zone | -
|---|---|
0 |
-UTC-12 International Date Line West |
-
100 |
-UTC+13 Samoa |
-
110 |
-UTC-11 Coordinated Universal Time-11 |
-
200 |
-UTC-10 Hawaii |
-
300 |
-UTC-09 Alaska |
-
400 |
-UTC-08 Pacific Time (US & Canada) |
-
410 |
-UTC-08 Baja California |
-
500 |
-UTC-07 Mountain Time (US & Canada) |
-
510 |
-UTC-07 Chihuahua, La Paz, Mazatlan |
-
520 |
-UTC-07 Arizona |
-
600 |
-UTC-06 Saskatchewan |
-
610 |
-UTC-06 Central America |
-
620 |
-UTC-06 Central Time (US & Canada) |
-
630 |
-UTC-06 Guadalajara, Mexico City, Monterrey |
-
700 |
-UTC-05 Eastern Time (US & Canada) |
-
710 |
-UTC-05 Bogota, Lima, Quito |
-
720 |
-UTC-05 Indiana (East) |
-
800 |
-UTC-04 Atlantic Time (Canada) |
-
810 |
-UTC-04 Cuiaba |
-
820 |
-UTC-04 Santiago |
-
830 |
-UTC-04 Georgetown, La Paz, Manaus, San Juan |
-
840 |
-UTC-04 Caracas |
-
850 |
-UTC-04 Asuncion |
-
900 |
-UTC-03:30 Newfoundland |
-
910 |
-UTC-03 Brasilia |
-
920 |
-UTC-03 Greenland |
-
930 |
-UTC-03 Montevideo |
-
940 |
-UTC-03 Cayenne, Fortaleza |
-
950 |
-UTC-03 Buenos Aires |
-
960 |
-UTC-03 Salvador |
-
1000 |
-UTC-02 Mid-Atlantic |
-
1010 |
-UTC-02 Coordinated Universal Time-02 |
-
1100 |
-UTC-01 Azores |
-
1110 |
-UTC-01 Cabo Verde |
-
1200 |
-UTC Dublin, Edinburgh, Lisbon, London |
-
1210 |
-UTC Monrovia, Reykjavik |
-
1220 |
-UTC Casablanca |
-
1230 |
-UTC Coordinated Universal Time |
-
1300 |
-UTC+01 Belgrade, Bratislava, Budapest, Ljubljana, Prague |
-
1310 |
-UTC+01 Sarajevo, Skopje, Warsaw, Zagreb |
-
1320 |
-UTC+01 Brussels, Copenhagen, Madrid, Paris |
-
1330 |
-UTC+01 West Central Africa |
-
1340 |
-UTC+01 Amsterdam, Berlin, Bern, Rome, Stockholm, Vienna |
-
1350 |
-UTC+01 Windhoek |
-
1360 |
-UTC+01 Tripoli |
-
1400 |
-UTC+02 E. Europe |
-
1410 |
-UTC+02 Cairo |
-
1420 |
-UTC+02 Helsinki, Kyiv, Riga, Sofia, Tallinn, Vilnius |
-
1430 |
-UTC+02 Athens, Bucharest |
-
1440 |
-UTC+02 Jerusalem |
-
1450 |
-UTC+02 Amman |
-
1460 |
-UTC+02 Beirut |
-
1470 |
-UTC+02 Harare, Pretoria |
-
1480 |
-UTC+02 Damascus |
-
1490 |
-UTC+02 Istanbul |
-
1500 |
-UTC+03 Kuwait, Riyadh |
-
1510 |
-UTC+03 Baghdad |
-
1520 |
-UTC+03 Nairobi |
-
1530 |
-UTC+03 Kaliningrad, Minsk |
-
1540 |
-UTC+04 Moscow, St. Petersburg, Volgograd |
-
1550 |
-UTC+03 Tehran |
-
1600 |
-UTC+04 Abu Dhabi, Muscat |
-
1610 |
-UTC+04 Baku |
-
1620 |
-UTC+04 Yerevan |
-
1630 |
-UTC+04 Kabul |
-
1640 |
-UTC+04 Tbilisi |
-
1650 |
-UTC+04 Port Louis |
-
1700 |
-UTC+06 Ekaterinburg |
-
1710 |
-UTC+05 Tashkent |
-
1720 |
-UTC+05 Chennai, Kolkata, Mumbai, New Delhi |
-
1730 |
-UTC+05 Sri Jayawardenepura |
-
1740 |
-UTC+05 Kathmandu |
-
1750 |
-UTC+05 Islamabad, Karachi |
-
1800 |
-UTC+06 Astana |
-
1810 |
-UTC+07 Novosibirsk |
-
1820 |
-UTC+06 Yangon (Rangoon) |
-
1830 |
-UTC+06 Dhaka |
-
1900 |
-UTC+08 Krasnoyarsk |
-
1910 |
-UTC+07 Bangkok, Hanoi, Jakarta |
-
1900 |
-UTC+08 Krasnoyarsk |
-
2000 |
-UTC+08 Beijing, Chongqing, Hong Kong SAR, Urumqi |
-
2010 |
-UTC+09 Irkutsk |
-
2020 |
-UTC+08 Kuala Lumpur, Singapore |
-
2030 |
-UTC+08 Taipei |
-
2040 |
-UTC+08 Perth |
-
2050 |
-UTC+08 Ulaanbaatar |
-
2100 |
-UTC+09 Seoul |
-
2110 |
-UTC+09 Osaka, Sapporo, Tokyo |
-
2120 |
-UTC+10 Yakutsk |
-
2130 |
-UTC+09 Darwin |
-
2140 |
-UTC+09 Adelaide |
-
2200 |
-UTC+10 Canberra, Melbourne, Sydney |
-
2210 |
-UTC+10 Brisbane |
-
2220 |
-UTC+10 Hobart |
-
2230 |
-UTC+11 Vladivostok |
-
2240 |
-UTC+10 Guam, Port Moresby |
-
2300 |
-UTC+11 Solomon Is., New Caledonia |
-
2310 |
-UTC+12 Magadan |
-
2400 |
-UTC+12 Fiji |
-
2410 |
-UTC+12 Auckland, Wellington |
-
2420 |
-UTC+12 Petropavlovsk-Kamchatsky |
-
2430 |
-UTC+12 Coordinated Universal Time +12 |
-
2500 |
-UTC+13 Nuku'alofa |
-
| App | -Product ID | -AUMID | -
|---|---|---|
| Alarms and clock | -44F7D2B4-553D-4BEC-A8B7-634CE897ED5F | -Microsoft.WindowsAlarms_8wekyb3d8bbwe!App | -
| Calculator | -B58171C6-C70C-4266-A2E8-8F9C994F4456 | -Microsoft.WindowsCalculator_8wekyb3d8bbwe!App | -
| Camera | -F0D8FEFD-31CD-43A1-A45A-D0276DB069F1 | -Microsoft.WindowsCamera_8wekyb3d8bbwe!App | -
| Contact Support | -0DB5FCFF-4544-458A-B320-E352DFD9CA2B | -Windows.ContactSupport_cw5n1h2txyewy!App | -
| Cortana | -FD68DCF4-166F-4C55-A4CA-348020F71B94 | -Microsoft.Windows.Cortana_cw5n1h2txyewy!CortanaUI | -
| Excel | -EAD3E7C0-FAE6-4603-8699-6A448138F4DC | -Microsoft.Office.Excel_8wekyb3d8bbwe!microsoft.excel | -
| 82A23635-5BD9-DF11-A844-00237DE2DB9E | -Microsoft.MSFacebook_8wekyb3d8bbwe!x82a236355bd9df11a84400237de2db9e | -|
| File Explorer | -C5E2524A-EA46-4F67-841F-6A9465D9D515 | -c5e2524a-ea46-4f67-841f-6a9465d9d515_cw5n1h2txyewy!App | -
| FM Radio | -F725010E-455D-4C09-AC48-BCDEF0D4B626 | -N/A | -
| Get Started | -B3726308-3D74-4A14-A84C-867C8C735C3C | -Microsoft.Getstarted_8wekyb3d8bbwe!App | -
| Groove Music | -D2B6A184-DA39-4C9A-9E0A-8B589B03DEC0 | -Microsoft.ZuneMusic_8wekyb3d8bbwe!Microsoft.ZuneMusic | -
| Maps | -ED27A07E-AF57-416B-BC0C-2596B622EF7D | -Microsoft.WindowsMaps_8wekyb3d8bbwe!App | -
| Messaging | -27E26F40-E031-48A6-B130-D1F20388991A | -Microsoft.Messaging_8wekyb3d8bbwe!x27e26f40ye031y48a6yb130yd1f20388991ax | -
| Microsoft Edge | -395589FB-5884-4709-B9DF-F7D558663FFD | -Microsoft.MicrosoftEdge_8wekyb3d8bbwe!MicrosoftEdge | -
| Money | -1E0440F1-7ABF-4B9A-863D-177970EEFB5E | -Microsoft.BingFinance_8wekyb3d8bbwe!AppexFinance | -
| Movies and TV | -6AFFE59E-0467-4701-851F-7AC026E21665 | -Microsoft.ZuneVideo_8wekyb3d8bbwe!Microsoft.ZuneVideo | -
| News | -9C3E8CAD-6702-4842-8F61-B8B33CC9CAF1 | -Microsoft.BingNews_8wekyb3d8bbwe!AppexNews | -
| OneDrive | -AD543082-80EC-45BB-AA02-FFE7F4182BA8 | -Microsoft.MicrosoftSkydrive_8wekyb3d8bbwe!App | -
| OneNote | -CA05B3AB-F157-450C-8C49-A1F127F5E71D | -Microsoft.Office.OneNote_8wekyb3d8bbwe!microsoft.onenoteim | -
| Outlook Calendar | -A558FEBA-85D7-4665-B5D8-A2FF9C19799B |
-Microsoft.WindowsCommunicationsApps_8wekyb3d8bbwe!Microsoft.WindowsLive.Calendar |
-
| Outlook Mail | -A558FEBA-85D7-4665-B5D8-A2FF9C19799B |
-Microsoft.WindowsCommunicationsApps_8wekyb3d8bbwe!Microsoft.WindowsLive.Mail |
-
| People | -60BE1FB8-3291-4B21-BD39-2221AB166481 | -Microsoft.People_8wekyb3d8bbwe!xb94d6231y84ddy49a8yace3ybc955e769e85x | -
| Phone (dialer) | -F41B5D0E-EE94-4F47-9CFE-3D3934C5A2C7 | -Microsoft.CommsPhone_8wekyb3d8bbwe!App | -
| Photos | -FCA55E1B-B9A4-4289-882F-084EF4145005 | -Microsoft.Windows.Photos_8wekyb3d8bbwe!App | -
| Podcasts | -C3215724-B279-4206-8C3E-61D1A9D63ED3 | -Microsoft.MSPodcast_8wekyb3d8bbwe!xc3215724yb279y4206y8c3ey61d1a9d63ed3x | -
| PowerPoint | -B50483C4-8046-4E1B-81BA-590B24935798 | -Microsoft.Office.PowerPoint_8wekyb3d8bbwe!microsoft.pptim | -
| Settings | -2A4E62D8-8809-4787-89F8-69D0F01654FB | -2a4e62d8-8809-4787-89f8-69d0f01654fb_8wekyb3d8bbwe!App | -
| Skype | -C3F8E570-68B3-4D6A-BDBB-C0A3F4360A51 | -Microsoft.SkypeApp_kzf8qxf38zg5c!Skype.AppId | -
| Skype Video | -27E26F40-E031-48A6-B130-D1F20388991A | -Microsoft.Messaging_8wekyb3d8bbwe!App | -
| Sports | -0F4C8C7E-7114-4E1E-A84C-50664DB13B17 | -Microsoft.BingSports_8wekyb3d8bbwe!AppexSports | -
| Storage | -5B04B775-356B-4AA0-AAF8-6491FFEA564D | -N/A | -
| Store | -7D47D89A-7900-47C5-93F2-46EB6D94C159 | -Microsoft.WindowsStore_8wekyb3d8bbwe!App | -
| Voice recorder | -7311B9C5-A4E9-4C74-BC3C-55B06BA95AD0 | -Microsoft.WindowsSoundRecorder_8wekyb3d8bbwe!App | -
| Wallet | -587A4577-7868-4745-A29E-F996203F1462 | -Microsoft.MicrosoftWallet_8wekyb3d8bbwe!App | -
| Weather | -63C2A117-8604-44E7-8CEF-DF10BE3A57C8 | -Microsoft.BingWeather_8wekyb3d8bbwe!App | -
| Windows Feedback | -7604089D-D13F-4A2D-9998-33FC02B63CE3 | -Microsoft.WindowsFeedback_8wekyb3d8bbwe!App | -
| Word | -258F115C-48F4-4ADB-9A68-1387E634459B | -Microsoft.Office.Word_8wekyb3d8bbwe!microsoft.word | -
| Xbox | -B806836F-EEBE-41C9-8669-19E243B81B83 | -Microsoft.XboxApp_8wekyb3d8bbwe!Microsoft.XboxApp | -
Reserved for future use |
-WIP mandatory settings -Set = 1 -Not set = 0 |
-Reserved for future use |
-AppLocker configured -Yes = 1 -No = 0 |
-WIP on = 1 -WIP off = 0 |
-
4 |
-3 |
-2 |
-1 |
-0 |
-
| Name | -Description | -
|---|---|
| Add | -This is required to precede the Exec command.
-
|
-
| Exec | -The Exec node includes the parameters and properties requires to locate, download, validate and perform product installation.
-
|
-
| Element | -Description | -
|---|---|
| MsiInstallJob | -root element
- "Attribute: "id - the application identifier of the application being installed |
-
| Product | -child element of MsiInstallJob
- Attribute: “Version” – string representation of application version |
-
| Download | -child element of Product. Container for download configuration information. | -
| ContentURLList | -child element of Download. Contains list of 1 or more content download URL locators in the form of ContentURL elements. | -
| ContentURL | -Location content should be downloaded from. Must be a property formatted URL that points to the .MSI file. | -
| Validation | -Contains information used to validate contend authenticity. • FileHash – SHA256 hash value of file content | -
| FileHash | -SHA256 hash value of file content | -
| Enforcement | -installation properties to be used when installing this MSI | -
| CommandLine | -Command-line options to be used when calling MSIEXEC.exe | -
| TimeOut | -Amount of time, in minutes that the installation process can run before the installer considers the installation may have failed and no longer monitors the installation operation. | -
| RetryCount | -The number of times the download and installation operation will be retried before the installation will be marked as failed. | -
| RetryInterval | -Amount of time, in minutes between retry operations. | -
| Target | -Per-user MSI | -Per-machine MSI | -Dual mode MSI | -
|---|---|---|---|
| User | -Install the MSI per-user
- LocURI contains a User prefix, such as ./User |
-Install the MSI per-device
- LocURI contains a Device prefix, such as ./Device |
-Install the MSI per-user
- LocURI contains a User prefix, such as ./User |
-
| System | -Install the MSI per-user
- LocURI contains a User prefix, such as ./User |
-Install the MSI per-device
- LocURI contains a Device prefix, such as ./Device |
-Install the MSI per-user
- LocURI contains a User prefix, such as ./User |
-
| Target | -Per-user MSI | -Per-machine MSI | -Dual mode MSI | -
|---|---|---|---|
| User | -Install the MSI per-user
- LocURI contains a User prefix, such as ./User |
-Install the MSI per-device
- LocURI contains a Device prefix, such as ./Device |
-Install the MSI per-user
- LocURI contains a User prefix, such as ./User |
-
| System | -Install the MSI per-user
- LocURI contains a User prefix, such as ./User |
-Install the MSI per-device
- LocURI contains a Device prefix, such as ./Device |
-Install the MSI per- system context
- LocURI contains a Device prefix, such as ./Device |
-
| Method | -Request URI | -
|---|---|
GET |
-https://bspmts.mp.microsoft.com/V1/Inventory?continuationToken={ContinuationToken}&modifiedSince={ModifiedSince}&licenseTypes={LicenseType}&maxResults={MaxResults} |
-
| Parameter | -Type | -Default value | -Description | -
|---|---|---|---|
continuationToken |
-string |
-Null |
-- |
modifiedSince |
-datetime |
-Null |
-Optional. Used to determine changes since a specific date. |
-
licenseTypes |
-collection of LicenseType |
-{online,offline} |
-Optional. A collection of license types |
-
maxResults |
-integer-32 |
-25 |
-Optional. Specifies the maximum number of applications returned in a single query. |
-
| Query type | -Example query | -
|---|---|
Online and offline |
-https://bspmts.mp.microsoft.com/V1/Inventory?licenseTypes=online&licenseTypes=offline&maxResults=25 |
-
Online only |
-https://bspmts.mp.microsoft.com/V1/Inventory?licenseTypes=online&maxResults=25 |
-
Offline only |
-https://bspmts.mp.microsoft.com/V1/Inventory?licenseTypes=offline&maxResults=25 |
-
Both license types and a time filter |
-https://bspmts.mp.microsoft.com/V1/Inventory?modifiedSince=2015-07-13T14%3a02%3a25.6863382-07%3a00&licenseTypes=online&licenseTypes=offline&maxResults=25 |
-
| Error code | -Description | -Retry | -Data field | -
|---|---|---|---|
400 |
-Invalid parameters |
-No |
-Parameter name -Invalid modified date, license, or continuationToken -Details: String |
-
| Method | -Request URI | -
|---|---|
GET |
-https://bspmts.mp.microsoft.com/V1/Products/{ProductId}/{SkuId}/LocalizedDetails/{language} |
-
| Parameter | -Type | -Description | -
|---|---|---|
productId |
-string |
-Required. Product identifier for an application that is used by the Store for Business. |
-
skuId |
-string |
-Required. Product identifier that specifies a specific SKU of an application. |
-
language |
-string |
-Required. Language in ISO format, such as en-us, en-ca. |
-
| Error code | -Description | -Retry | -Data field | -
|---|---|---|---|
400 |
-Invalid parameters |
-No |
-Parameter name -Reason: Missing parameter or invalid parameter -Details: String |
-
404 |
-Not found |
-- | Item type: productId, skuId, language |
-
| Method | -Request URI | -
|---|---|
POST |
-https://bspmts.mp.microsoft.com/V1/Products/{productId}/{skuId}/OfflineLicense/{contentId} |
-
| Parameter | -Type | -Description | -
|---|---|---|
productId |
-string |
-Required. Identifies a specific product that has been acquired. |
-
skuId |
-string |
-Required. The SKU identifier. |
-
contentId |
-string |
-Required. Identifies a specific application. |
-
| Error code | -Description | -Retry | -Data field | -
|---|---|---|---|
400 |
-Invalid parameters |
-No |
-Parameter name -Reason: Missing parameter or invalid parameter -Details: String |
-
404 |
-Not found |
-- | - |
409 |
-Conflict |
-- | Reason: Not owned, Not offline |
-
| Method | -Request URI | -
|---|---|
GET |
-https://bspmts.mp.microsoft.com/V1/Products/{productId}/{skuId} |
-
| Parameter | -Type | -Description | -
|---|---|---|
productId |
-string |
-Required. Product identifier for an application that is used by the Store for Business. |
-
skuId |
-string |
-Required. Product identifier that specifies a specific SKU of an application. |
-
| Error code | -Description | -Retry | -Data field | -
|---|---|---|---|
400 |
-Invalid parameters |
-No |
-Parameter name -Reason: Missing parameter or invalid parameter -Details: String |
-
404 |
-Not found |
-- | - |
| Method | -Request URI | -
|---|---|
GET |
-https://bspmts.mp.microsoft.com/V1/Products/{productId}/{skuId}/Packages/{packageId} |
-
| Parameter | -Type | -Description | -
|---|---|---|
productId |
-string |
-Required. Product identifier for an application that is used by the Store for Business. |
-
skuId |
-string |
-Required. Product identifier that specifies a specific SKU of an application. |
-
packageId |
-string |
-Required. |
-
| Error code | -Description | -Retry | -Data field | -Details | -
|---|---|---|---|---|
400 |
-Invalid parameters |
-No |
-Parameter name -Reason: Invalid parameter -Details: String |
-Can be productId, skuId, or packageId |
-
404 |
-Not found |
-- | - | Item type: Product/SKU |
-
409 |
-Conflict |
-- | Reason: Not owned |
-- |
| Method | -Request URI | -
|---|---|
GET |
-https://bspmts.mp.microsoft.com/V1/Products/{productId}/{skuId}/Packages |
-
| Parameter | -Type | -Description | -
|---|---|---|
productId |
-string |
-Required. Product identifier for an application that is used by the Store for Business. |
-
skuId |
-string |
-Required. Product identifier that specifies a specific SKU of an application. |
-
| Error code | -Description | -Retry | -Data field | -
|---|---|---|---|
400 |
-Invalid parameters |
-No |
-Parameter name -Reason: Missing parameter or invalid parameter -Details: String |
-
404 |
-Not found |
-- | - |
409 |
-Conflict |
-- | Reason: Not owned |
-
| Method | -Request URI | -
|---|---|
GET |
-https://bspmts.mp.microsoft.com/V1/Inventory/{productId}/{skuId}/Seats/{username} |
-
| Parameter | -Type | -Description | -
|---|---|---|
productId |
-string |
-Required. Product identifier for an application that is used by the Store for Business. |
-
skuId |
-string |
-Required. Product identifier that specifies a specific SKU of an application. |
-
username |
-string |
-Requires UserPrincipalName (UPN). User name of the target user account. |
-
| Error code | -Description | -Retry | -Data field | -Details | -
|---|---|---|---|---|
400 |
-Invalid parameters |
-No |
-Parameter name -Reason: Missing parameter or invalid parameter -Details: String |
-Invalid can include productId, skuId or username |
-
404 |
-Not found |
-- | - | ItemType: Inventory, User, Seat -Values: ProductId/SkuId, UserName, ProductId/SkuId/Username |
-
409 |
-Conflict |
-- | Reason: Not online |
-- |
| Method | -Request URI | -
|---|---|
GET |
-https://bspmts.mp.microsoft.com/V1/Users/{username}/Seats?continuationToken={ContinuationToken}&maxResults={MaxResults} |
-
| Parameter | -Type | -Description | -
|---|---|---|
useName |
-string |
-Requires UserPrincipalName (UPN). User name of the target user account. |
-
continuationToken |
-string |
-Optional. |
-
maxResults |
-inteter-32 |
-Optional. Default = 25, Maximum = 100 |
-
| Error code | -Description | -Retry | -Data field | -
|---|---|---|---|
400 |
-Invalid parameters |
-No |
-Parameter name -Reason: Invalid parameter -Details: String |
-
404 |
-Not found |
-- | Item type: User -Values: UserName |
-
The data type is boolean. Supported operation is Get and Replace. **InBoxApps/Welcome/CurrentBackgroundPath** -
Download location for image to be used as the background during user sessions and on the welcome screen. To set this, specify an https URL to a PNG file (only PNGs are supported for security reasons). If any certificate authorities need to be trusted in order to access the URL, please ensure they are valid and installed on the Hub, otherwise it may not be able to load the image. +
Download location for image to be used as the background during user sessions and on the welcome screen. To set this, specify an https URL to a 32-bit PNG file (only PNGs are supported for security reasons). If any certificate authorities need to be trusted in order to access the URL, please ensure they are valid and installed on the Hub, otherwise it may not be able to load the image.
The data type is string. Supported operation is Get and Replace.
diff --git a/windows/configuration/wcd/wcd-accountmanagement.md b/windows/configuration/wcd/wcd-accountmanagement.md
index b565989431..8d4bfbfc06 100644
--- a/windows/configuration/wcd/wcd-accountmanagement.md
+++ b/windows/configuration/wcd/wcd-accountmanagement.md
@@ -19,13 +19,13 @@ Use these settings to configure the Account Manager service.
## Applies to
-| Settings | Desktop editions | Mobile editions | Surface Hub | HoloLens | IoT Core |
-| --- | :---: | :---: | :---: | :---: | :---: |
-| [DeletionPolicy](#deletionpolicy) | | | | ✔️ | |
-| [EnableProfileManager](#enableprofilemanager) | | | | ✔️ | |
-| [ProfileInactivityThreshold](#profileinactivitythreshold) | | | | ✔️ | |
-| [StorageCapacityStartDeletion](#storagecapacitystartdeletion) | | | | ✔️ | |
-| [StorageCapacityStopDeletion](#storagecapacitystopdeletion) | | | | ✔️ | |
+| Settings | Windows client | Surface Hub | HoloLens | IoT Core |
+| --- | :---: | :---: | :---: | :---: |
+| [DeletionPolicy](#deletionpolicy) | | | ✔️ | |
+| [EnableProfileManager](#enableprofilemanager) | | | ✔️ | |
+| [ProfileInactivityThreshold](#profileinactivitythreshold) | | | ✔️ | |
+| [StorageCapacityStartDeletion](#storagecapacitystartdeletion) | | | ✔️ | |
+| [StorageCapacityStopDeletion](#storagecapacitystopdeletion) | | | ✔️ | |
>[!NOTE]
>Although the AccountManagement settings are available in advanced provisioning for other editions, you should only use them for HoloLens devices.
diff --git a/windows/configuration/wcd/wcd-accounts.md b/windows/configuration/wcd/wcd-accounts.md
index f5ef92247d..a6462788e1 100644
--- a/windows/configuration/wcd/wcd-accounts.md
+++ b/windows/configuration/wcd/wcd-accounts.md
@@ -19,7 +19,7 @@ Use these settings to join a device to an Active Directory domain or an Azure Ac
## Applies to
-| Setting groups | Desktop editions | Surface Hub | HoloLens | IoT Core |
+| Setting groups | Windows client | Surface Hub | HoloLens | IoT Core |
| --- | :---: | :---: | :---: | :---: |
| [Azure](#azure) | ✔️ | ✔️ | ✔️ | |
| [ComputerAccount](#computeraccount) | ✔️ | ✔️ | | ✔️ |
diff --git a/windows/configuration/wcd/wcd-admxingestion.md b/windows/configuration/wcd/wcd-admxingestion.md
index 4f78a97183..1116a54650 100644
--- a/windows/configuration/wcd/wcd-admxingestion.md
+++ b/windows/configuration/wcd/wcd-admxingestion.md
@@ -26,10 +26,10 @@ Starting in Windows 10, version 1703, you can import (*ingest*) select Group Pol
## Applies to
-| Setting groups | Desktop editions | Mobile editions | Surface Hub | HoloLens | IoT Core |
-| --- | :---: | :---: | :---: | :---: | :---: |
-| [ConfigADMXInstalledPolicy](#configadmxinstalledpolicy) | ✔️ | | | | |
-| [ConfigOperations](#configoperations) | ✔️ | | | | |
+| Setting groups | Windows client | Surface Hub | HoloLens | IoT Core |
+| --- | :---: | :---: | :---: | :---: |
+| [ConfigADMXInstalledPolicy](#configadmxinstalledpolicy) | ✔️ | | | |
+| [ConfigOperations](#configoperations) | ✔️ | | | |
## ConfigADMXInstalledPolicy
diff --git a/windows/configuration/wcd/wcd-assignedaccess.md b/windows/configuration/wcd/wcd-assignedaccess.md
index af094faef4..36eb055038 100644
--- a/windows/configuration/wcd/wcd-assignedaccess.md
+++ b/windows/configuration/wcd/wcd-assignedaccess.md
@@ -19,10 +19,10 @@ Use this setting to configure single use (kiosk) devices.
## Applies to
-| Setting | Desktop editions | Mobile editions | Surface Hub | HoloLens | IoT Core |
-| --- | :---: | :---: | :---: | :---: | :---: |
-| [AssignedAccessSettings](#assignedaccesssettings) | ✔️ | | | ✔️ | |
-| [MultiAppAssignedAccessSettings](#multiappassignedaccesssettings) | ✔️ | | | ✔️ | |
+| Setting | Windows client | Surface Hub | HoloLens | IoT Core |
+| --- | :---: | :---: | :---: | :---: |
+| [AssignedAccessSettings](#assignedaccesssettings) | ✔️ | | ✔️ | |
+| [MultiAppAssignedAccessSettings](#multiappassignedaccesssettings) | ✔️ | | ✔️ | |
## AssignedAccessSettings
diff --git a/windows/configuration/wcd/wcd-browser.md b/windows/configuration/wcd/wcd-browser.md
index f9b61ff048..3b57376dae 100644
--- a/windows/configuration/wcd/wcd-browser.md
+++ b/windows/configuration/wcd/wcd-browser.md
@@ -19,13 +19,13 @@ Use to configure browser settings that should only be set by OEMs who are part o
## Applies to
-| Setting groups | Desktop editions | Mobile editions | Surface Hub | HoloLens | IoT Core |
-| --- | :---: | :---: | :---: | :---: | :---: |
-| [AllowPrelaunch](#allowprelaunch) | | | ✔️ | | |
-| [FavoriteBarItems](#favoritebaritems) | ✔️ | | | | |
-| [Favorites](#favorites) | | ✔️ | | | |
-| [PartnerSearchCode](#partnersearchcode) | ✔️ | ✔️ | ✔️ | | |
-| [SearchProviders](#searchproviders) | | ✔️ | | | |
+| Setting groups | Windows client | Surface Hub | HoloLens | IoT Core |
+| --- | :---: | :---: | :---: | :---: |
+| [AllowPrelaunch](#allowprelaunch) | | ✔️ | | |
+| [FavoriteBarItems](#favoritebaritems) | ✔️ | | | |
+| [Favorites](#favorites) | | | | |
+| [PartnerSearchCode](#partnersearchcode) | ✔️ | ✔️ | | |
+| [SearchProviders](#searchproviders) | | | | |
## AllowPrelaunch
diff --git a/windows/configuration/wcd/wcd-cellcore.md b/windows/configuration/wcd/wcd-cellcore.md
index e7c8301aa9..56d5c63695 100644
--- a/windows/configuration/wcd/wcd-cellcore.md
+++ b/windows/configuration/wcd/wcd-cellcore.md
@@ -24,26 +24,26 @@ Use to configure settings for cellular data.
## Applies to
- Setting groups | Desktop editions | Mobile editions | Surface Hub | HoloLens | IoT Core
- --- | :---: | :---: | :---: | :---: | :---:
- PerDevice: [CellConfigurations](#cellconfigurations) | | ✔️ | | | |
- PerDevice: [CellData](#celldata) | ✔️ | ✔️ | ✔️ | |
- PerDevice: [CellUX](#cellux) | ✔️ | ✔️ | ✔️ | |
- PerDevice: [CGDual](#cgdual) | | ✔️ | | |
- PerDevice: [eSim](#esim) | ✔️ | ✔️ | ✔️ | |
- PerDevice: [External](#external) | | ✔️ | | |
- PerDevice: [General](#general) | | ✔️ | | |
- PerDevice: [RCS](#rcs) | | ✔️ | | |
- PerDevice: [SMS](#sms) | ✔️ | ✔️ | ✔️ | |
- PerDevice: [UIX](#uix) | | ✔️ | | |
- PerDevice: [UTK](#utk) | | ✔️ | | |
- PerlMSI: [CellData](#celldata2) | | ✔️ | | |
- PerIMSI: [CellUX](#cellux2) | | ✔️ | | |
- PerIMSI: [General](#general2) | | ✔️ | | |
- PerIMSI: [RCS](#rcs2) | | ✔️ | | |
- PerIMSI: [SMS](#sms2) | ✔️ | ✔️ | ✔️ | |
- PerIMSI: [UTK](#utk2) | | ✔️ | | |
- PerIMSI: [VoLTE](#volte) | | ✔️ | | |
+ Setting groups | Windows client | Surface Hub | HoloLens | IoT Core
+ --- | :---: | :---: | :---: | :---:
+ PerDevice: [CellConfigurations](#cellconfigurations) | | | | |
+ PerDevice: [CellData](#celldata) | ✔️ | ✔️ | |
+ PerDevice: [CellUX](#cellux) | ✔️ | ✔️ | |
+ PerDevice: [CGDual](#cgdual) | | | |
+ PerDevice: [eSim](#esim) | ✔️ | ✔️ | |
+ PerDevice: [External](#external) | | | |
+ PerDevice: [General](#general) | | | |
+ PerDevice: [RCS](#rcs) | | | |
+ PerDevice: [SMS](#sms) | ✔️ | ✔️ | |
+ PerDevice: [UIX](#uix) | | | |
+ PerDevice: [UTK](#utk) | | | |
+ PerlMSI: [CellData](#celldata2) | | | |
+ PerIMSI: [CellUX](#cellux2) | | | |
+ PerIMSI: [General](#general2) | | | |
+ PerIMSI: [RCS](#rcs2) | | | |
+ PerIMSI: [SMS](#sms2) | ✔️ | ✔️ | |
+ PerIMSI: [UTK](#utk2) | | | |
+ PerIMSI: [VoLTE](#volte) | | | |
## PerDevice
diff --git a/windows/configuration/wcd/wcd-cellular.md b/windows/configuration/wcd/wcd-cellular.md
index 323e7faf03..825f43c4c2 100644
--- a/windows/configuration/wcd/wcd-cellular.md
+++ b/windows/configuration/wcd/wcd-cellular.md
@@ -21,9 +21,9 @@ Use to configure settings for cellular connections.
## Applies to
-| Setting groups | Desktop editions | Mobile editions | Surface Hub | HoloLens | IoT Core |
-| --- | :---: | :---: | :---: | :---: | :---: |
-| All settings | ✔️ | | | | |
+| Setting groups | Windows client | Surface Hub | HoloLens | IoT Core |
+| --- | :---: | :---: | :---: | :---: |
+| All settings | ✔️ | | | |
## PerDevice
diff --git a/windows/configuration/wcd/wcd-certificates.md b/windows/configuration/wcd/wcd-certificates.md
index a30bcdeadc..ca41ffe27e 100644
--- a/windows/configuration/wcd/wcd-certificates.md
+++ b/windows/configuration/wcd/wcd-certificates.md
@@ -25,9 +25,9 @@ Use to deploy Root Certificate Authority (CA) certificates to devices. The follo
## Applies to
-| Setting groups | Desktop editions | Mobile editions | Surface Hub | HoloLens | IoT Core |
-| --- | :---: | :---: | :---: | :---: | :---: |
-| All setting groups | ✔️ | ✔️ | ✔️ | ✔️ | ✔️ |
+| Setting groups | Windows client | Surface Hub | HoloLens | IoT Core |
+| --- | :---: | :---: | :---: | :---: |
+| All setting groups | ✔️ | ✔️ | ✔️ | ✔️ |
## CACertificates
diff --git a/windows/configuration/wcd/wcd-cleanpc.md b/windows/configuration/wcd/wcd-cleanpc.md
index 0f31ecac6f..32bdc154b2 100644
--- a/windows/configuration/wcd/wcd-cleanpc.md
+++ b/windows/configuration/wcd/wcd-cleanpc.md
@@ -19,10 +19,10 @@ Use to remove user-installed and pre-installed applications, with the option to
## Applies to
-| Settings | Desktop editions | Mobile editions | Surface Hub | HoloLens | IoT Core |
-| --- | :---: | :---: | :---: | :---: | :---: |
-| CleanPCRetainingUserData | ✔️ | | | | |
-| CleanPCWithoutRetainingUserData | ✔️ | | | | |
+| Settings | Windows client | Surface Hub | HoloLens | IoT Core |
+| --- | :---: | :---: | :---: | :---: |
+| CleanPCRetainingUserData | ✔️ | | | |
+| CleanPCWithoutRetainingUserData | ✔️ | | | |
For each setting, the options are **Enable** and **Not configured**.
diff --git a/windows/configuration/wcd/wcd-connections.md b/windows/configuration/wcd/wcd-connections.md
index 8dc2911a9b..5c59173b68 100644
--- a/windows/configuration/wcd/wcd-connections.md
+++ b/windows/configuration/wcd/wcd-connections.md
@@ -19,9 +19,9 @@ Use to configure settings related to various types of phone connections.
## Applies to
-| Setting groups | Desktop editions | Mobile editions | Surface Hub | HoloLens | IoT Core |
-| --- | :---: | :---: | :---: | :---: | :---: |
-| All settings | ✔️ | ✔️ | ✔️ | | |
+| Setting groups | Windows client | Surface Hub | HoloLens | IoT Core |
+| --- | :---: | :---: | :---: | :---: |
+| All settings | ✔️ | ✔️ | | |
For each setting group:
diff --git a/windows/configuration/wcd/wcd-connectivityprofiles.md b/windows/configuration/wcd/wcd-connectivityprofiles.md
index 2fdfe8372f..33b7de451b 100644
--- a/windows/configuration/wcd/wcd-connectivityprofiles.md
+++ b/windows/configuration/wcd/wcd-connectivityprofiles.md
@@ -19,14 +19,14 @@ Use to configure profiles that a user will connect with, such as an email accoun
## Applies to
-| Setting groups | Desktop editions | Mobile editions | Surface Hub | HoloLens | IoT Core |
-| --- | :---: | :---: | :---: | :---: | :---: |
-| [Email](#email) | ✔️ | ✔️ | ✔️ | | |
-| [Exchange](#exchange) | ✔️ | ✔️ | ✔️ | | |
-| [KnownAccounts](#knownaccounts) | ✔️ | ✔️ | ✔️ | | |
-| [VPN](#vpn) | ✔️ | ✔️ | ✔️ | ✔️ | |
-| [WiFiSense](#wifisense) | ✔️ | ✔️ | ✔️ | | |
-| [WLAN](#wlan) | ✔️ | ✔️ | ✔️ | ✔️ | |
+| Setting groups | Windows client | Surface Hub | HoloLens | IoT Core |
+| --- | :---: | :---: | :---: | :---: |
+| [Email](#email) | ✔️ | ✔️ | | |
+| [Exchange](#exchange) | ✔️ | ✔️ | | |
+| [KnownAccounts](#knownaccounts) | ✔️ | ✔️ | | |
+| [VPN](#vpn) | ✔️ | ✔️ | ✔️ | |
+| [WiFiSense](#wifisense) | ✔️ | ✔️ | | |
+| [WLAN](#wlan) | ✔️ | ✔️ | ✔️ | |
## Email
diff --git a/windows/configuration/wcd/wcd-countryandregion.md b/windows/configuration/wcd/wcd-countryandregion.md
index e8cf5a0b37..81597e49d4 100644
--- a/windows/configuration/wcd/wcd-countryandregion.md
+++ b/windows/configuration/wcd/wcd-countryandregion.md
@@ -19,8 +19,8 @@ Use to configure a setting that partners must customize to ship Windows devices
## Applies to
-| Setting groups | Desktop editions | Mobile editions | Surface Hub | HoloLens | IoT Core |
-| --- | :---: | :---: | :---: | :---: | :---: |
-| CountryCodeForExtendedCapabilityPrompts | ✔️ | ✔️ | ✔️ | | |
+| Setting groups | Windows client | Surface Hub | HoloLens | IoT Core |
+| --- | :---: | :---: | :---: | :---: |
+| CountryCodeForExtendedCapabilityPrompts | ✔️ | ✔️ | | |
You can set the **CountryCodeForExtendedCapabilityPrompts** setting for **China** to enable additional capability prompts when apps use privacy-sensitive features (such as Contacts or Microphone).
diff --git a/windows/configuration/wcd/wcd-desktopbackgroundandcolors.md b/windows/configuration/wcd/wcd-desktopbackgroundandcolors.md
index 464d3c8163..e18abe6ad1 100644
--- a/windows/configuration/wcd/wcd-desktopbackgroundandcolors.md
+++ b/windows/configuration/wcd/wcd-desktopbackgroundandcolors.md
@@ -19,7 +19,7 @@ Do not use. Instead, use the [Personalization settings](wcd-personalization.md).
## Applies to
-| Setting groups | Desktop editions | Mobile editions | Surface Hub | HoloLens | IoT Core |
-| --- | :---: | :---: | :---: | :---: | :---: |
-| All settings | ✔️ | | | | |
+| Setting groups | Windows client | Surface Hub | HoloLens | IoT Core |
+| --- | :---: | :---: | :---: | :---: |
+| All settings | ✔️ | | | |
diff --git a/windows/configuration/wcd/wcd-developersetup.md b/windows/configuration/wcd/wcd-developersetup.md
index 666109a375..eee860859f 100644
--- a/windows/configuration/wcd/wcd-developersetup.md
+++ b/windows/configuration/wcd/wcd-developersetup.md
@@ -19,22 +19,20 @@ Use to unlock developer mode on HoloLens devices and configure authentication to
## Applies to
-| Setting groups | Desktop editions | Mobile editions | Surface Hub | HoloLens | IoT Core |
-| --- | :---: | :---: | :---: | :---: | :---: |
-| [EnableDeveloperMode](#enabledevelopermode) | | | | ✔️ | |
-| [AuthenticationMode](#authenticationmode) | | | | ✔️ | |
+| Setting groups | Windows client | Surface Hub | HoloLens | IoT Core |
+| --- | :---: | :---: | :---: | :---: |
+| [EnableDeveloperMode](#developersetupsettings-enabledevelopermode) | | | ✔️ | |
+| [AuthenticationMode](#windowsdeviceportalsettings-authentication-mode) | | | ✔️ | |
-
## DeveloperSetupSettings: EnableDeveloperMode
When this setting is configured as **True**, the device is unlocked for developer functionality.
-
## WindowsDevicePortalSettings: Authentication Mode
When AuthenticationMode is set to **Basic Auth**, enter a user name and password to enable the device to connect to and authenticate with the Windows Device Portal.
## Related topics
-- [Device Portal for HoloLens](/windows/uwp/debug-test-perf/device-portal-hololens)
\ No newline at end of file
+- [Device Portal for HoloLens](/windows/uwp/debug-test-perf/device-portal-hololens)
diff --git a/windows/configuration/wcd/wcd-deviceformfactor.md b/windows/configuration/wcd/wcd-deviceformfactor.md
index fc86909bc1..b233406d79 100644
--- a/windows/configuration/wcd/wcd-deviceformfactor.md
+++ b/windows/configuration/wcd/wcd-deviceformfactor.md
@@ -19,9 +19,9 @@ Use to identify the form factor of the device.
## Applies to
-| Setting | Desktop editions | Mobile editions | Surface Hub | HoloLens | IoT Core |
-| --- | :---: | :---: | :---: | :---: | :---: |
-| DeviceForm | ✔️ | ✔️ | ✔️ | | |
+| Setting | Windows client | Surface Hub | HoloLens | IoT Core |
+| --- | :---: | :---: | :---: | :---: |
+| DeviceForm | ✔️ | ✔️ | | |
Specifies the device form factor running Windows 10. Generally, the device form is set by the original equipment manufacturer (OEM), however you might want to change the device form based on its usage in your organization.
diff --git a/windows/configuration/wcd/wcd-devicemanagement.md b/windows/configuration/wcd/wcd-devicemanagement.md
index 236416cf96..bb1692d17e 100644
--- a/windows/configuration/wcd/wcd-devicemanagement.md
+++ b/windows/configuration/wcd/wcd-devicemanagement.md
@@ -19,12 +19,12 @@ Use to configure device management settings.
## Applies to
-| Setting | Desktop editions | Mobile editions | Surface Hub | HoloLens | IoT Core |
-| --- | :---: | :---: | :---: | :---: | :---: |
-| [Accounts](#accounts) | ✔️ | ✔️ | ✔️ | | |
-| [PGList](#pglist) | ✔️ | ✔️ | ✔️ | | |
-| [Policies](#policies) | ✔️ | ✔️ | ✔️ | | |
-| [TrustedProvisioningSource](#trustedprovisioningsource) | ✔️ | ✔️ | ✔️ | | |
+| Setting | Windows client | Surface Hub | HoloLens | IoT Core |
+| --- | :---: | :---: | :---: | :---: |
+| [Accounts](#accounts) | ✔️ | ✔️ | | |
+| [PGList](#pglist) | ✔️ | ✔️ | | |
+| [Policies](#policies) | ✔️ | ✔️ | | |
+| [TrustedProvisioningSource](#trustedprovisioningsource) | ✔️ | ✔️ | | |
## Accounts
diff --git a/windows/configuration/wcd/wcd-deviceupdatecenter.md b/windows/configuration/wcd/wcd-deviceupdatecenter.md
index 3dfa2d7fe2..e72df83e2d 100644
--- a/windows/configuration/wcd/wcd-deviceupdatecenter.md
+++ b/windows/configuration/wcd/wcd-deviceupdatecenter.md
@@ -17,7 +17,7 @@ Do not use **DeviceUpdateCenter** settings at this time.
## Applies to
-| Setting | Desktop editions | Mobile editions | Surface Hub | HoloLens | IoT Core |
-| --- | :---: | :---: | :---: | :---: | :---: |
-| All settings | ✔️ | | | | |
+| Setting | Windows client | Surface Hub | HoloLens | IoT Core |
+| --- | :---: | :---: | :---: | :---: |
+| All settings | ✔️ | | | |
diff --git a/windows/configuration/wcd/wcd-dmclient.md b/windows/configuration/wcd/wcd-dmclient.md
index 39949ed4c4..31d0ed7b8c 100644
--- a/windows/configuration/wcd/wcd-dmclient.md
+++ b/windows/configuration/wcd/wcd-dmclient.md
@@ -19,9 +19,9 @@ Use to specify enterprise-specific mobile device management configuration settin
## Applies to
-| Setting | Desktop editions | Mobile editions | Surface Hub | HoloLens | IoT Core |
-| --- | :---: | :---: | :---: | :---: | :---: |
-| UpdateManagementServiceAddress | ✔️ | ✔️ | ✔️ | | ✔️ |
+| Setting | Windows client | Surface Hub | HoloLens | IoT Core |
+| --- | :---: | :---: | :---: | :---: |
+| UpdateManagementServiceAddress | ✔️ | ✔️ | | ✔️ |
For the **UpdateManagementServiceAddress** setting, enter a list of servers. The first server in the semi-colon delimited list is the server that will be used to instantiate MDM sessions.
diff --git a/windows/configuration/wcd/wcd-editionupgrade.md b/windows/configuration/wcd/wcd-editionupgrade.md
index 79e2667cb2..aaa3c9a10e 100644
--- a/windows/configuration/wcd/wcd-editionupgrade.md
+++ b/windows/configuration/wcd/wcd-editionupgrade.md
@@ -19,11 +19,11 @@ Use to upgrade the edition of Windows 10 on the device. [Learn about Windows 10
## Applies to
-| Setting | Desktop editions | Mobile editions | Surface Hub | HoloLens | IoT Core |
-| --- | :---: | :---: | :---: | :---: | :---: |
-| [ChangeProductKey](#changeproductkey) | ✔️ | ✔️ | | | |
-| [UpgradeEditionWithLicense](#upgradeeditionwithlicense) | ✔️ | ✔️ | | ✔️ | |
-| [UpgradeEditionWithProductKey](#upgradeeditionwithproductkey) | ✔️ | ✔️ | | | |
+| Setting | Windows client | Surface Hub | HoloLens | IoT Core |
+| --- | :---: | :---: | :---: | :---: |
+| [ChangeProductKey](#changeproductkey) | ✔️ | | | |
+| [UpgradeEditionWithLicense](#upgradeeditionwithlicense) | ✔️ | | ✔️ | |
+| [UpgradeEditionWithProductKey](#upgradeeditionwithproductkey) | ✔️ | | | |
## ChangeProductKey
diff --git a/windows/configuration/wcd/wcd-firewallconfiguration.md b/windows/configuration/wcd/wcd-firewallconfiguration.md
index 4bc834f3ac..cd505cda87 100644
--- a/windows/configuration/wcd/wcd-firewallconfiguration.md
+++ b/windows/configuration/wcd/wcd-firewallconfiguration.md
@@ -19,9 +19,9 @@ Use to enable AllJoyn router to work on public networks.
## Applies to
-| Setting | Desktop editions | Mobile editions | Surface Hub | HoloLens | IoT Core |
-| --- | :---: | :---: | :---: | :---: | :---: |
-| EnableAllJoynOnPublicNetwork | | | | | ✔️ |
+| Setting | Windows client | Surface Hub | HoloLens | IoT Core |
+| --- | :---: | :---: | :---: | :---: |
+| EnableAllJoynOnPublicNetwork | | | | ✔️ |
Set to **True** or **False**.
diff --git a/windows/configuration/wcd/wcd-firstexperience.md b/windows/configuration/wcd/wcd-firstexperience.md
index 0561b8d3f4..a854a53a49 100644
--- a/windows/configuration/wcd/wcd-firstexperience.md
+++ b/windows/configuration/wcd/wcd-firstexperience.md
@@ -19,9 +19,9 @@ Use these settings to configure the out-of-box experience (OOBE) to set up HoloL
## Applies to
-| Setting | Desktop editions | Mobile editions | Surface Hub | HoloLens | IoT Core |
-| --- | :---: | :---: | :---: | :---: | :---: |
-| All settings | | | | ✔️ | |
+| Setting | Windows client | Surface Hub | HoloLens | IoT Core |
+| --- | :---: | :---: | :---: | :---: |
+| All settings | | | ✔️ | |
Setting | Description
--- | ---
diff --git a/windows/configuration/wcd/wcd-folders.md b/windows/configuration/wcd/wcd-folders.md
index cc594611bc..1eab5f086b 100644
--- a/windows/configuration/wcd/wcd-folders.md
+++ b/windows/configuration/wcd/wcd-folders.md
@@ -19,8 +19,8 @@ Use to add files to the device.
## Applies to
-| Setting | Desktop editions | Mobile editions | Surface Hub | HoloLens | IoT Core |
-| --- | :---: | :---: | :---: | :---: | :---: |
-| PublicDocuments | ✔️ | ✔️ | ✔️ | | |
+| Setting | Windows client | Surface Hub | HoloLens | IoT Core |
+| --- | :---: | :---: | :---: | :---: |
+| PublicDocuments | ✔️ | ✔️ | | |
Browse to and select a file or files that will be included in the provisioning package and added to the public profile documents folder on the target device. You can use the **Relative path to directory on target device** field to create a new folder within the public profile documents folder.
diff --git a/windows/configuration/wcd/wcd-kioskbrowser.md b/windows/configuration/wcd/wcd-kioskbrowser.md
index 0db1c60a59..b8dc34d1e1 100644
--- a/windows/configuration/wcd/wcd-kioskbrowser.md
+++ b/windows/configuration/wcd/wcd-kioskbrowser.md
@@ -19,12 +19,12 @@ Use KioskBrowser settings to configure Internet sharing.
## Applies to
-| Setting groups | Desktop editions | Mobile editions | Surface Hub | HoloLens | IoT Core |
-| --- | :---: | :---: | :---: | :---: | :---: |
-| All settings | | | | | ✔️ |
+| Setting groups | Windows client | Surface Hub | HoloLens | IoT Core |
+| --- | :---: | :---: | :---: | :---: |
+| All settings | | | | ✔️ |
>[!NOTE]
->To configure Kiosk Browser settings for desktop editions, go to [Policies > KioskBrowser](wcd-policies.md#kioskbrowser).
+>To configure Kiosk Browser settings for Windows client, go to [Policies > KioskBrowser](wcd-policies.md#kioskbrowser).
Kiosk Browser settings | Use this setting to
--- | ---
diff --git a/windows/configuration/wcd/wcd-licensing.md b/windows/configuration/wcd/wcd-licensing.md
index 98ebd963b2..82adee0181 100644
--- a/windows/configuration/wcd/wcd-licensing.md
+++ b/windows/configuration/wcd/wcd-licensing.md
@@ -19,10 +19,10 @@ Use for settings related to Microsoft licensing programs.
## Applies to
-| Setting | Desktop editions | Mobile editions | Surface Hub | HoloLens | IoT Core |
-| --- | :---: | :---: | :---: | :---: | :---: |
-| [AllowWindowsEntitlementReactivation](#allowwindowsentitlementreactivation) | ✔️ | | | | |
-| [DisallowKMSClientOnlineAVSValidation](#disallowkmsclientonlineavsvalidation) | ✔️ | | | | |
+| Setting | Windows client | Surface Hub | HoloLens | IoT Core |
+| --- | :---: | :---: | :---: | :---: |
+| [AllowWindowsEntitlementReactivation](#allowwindowsentitlementreactivation) | ✔️ | | | |
+| [DisallowKMSClientOnlineAVSValidation](#disallowkmsclientonlineavsvalidation) | ✔️ | | | |
## AllowWindowsEntitlementReactivation
diff --git a/windows/configuration/wcd/wcd-location.md b/windows/configuration/wcd/wcd-location.md
index c0617f9b4a..a2989cead5 100644
--- a/windows/configuration/wcd/wcd-location.md
+++ b/windows/configuration/wcd/wcd-location.md
@@ -18,9 +18,9 @@ Use Location settings to configure location services.
## Applies to
-| Setting groups | Desktop editions | Mobile editions | Surface Hub | HoloLens | IoT Core |
-| --- | :---: | :---: | :---: | :---: | :---: |
-| [EnableLocation](#enablelocation) | | | | | ✔️ |
+| Setting groups | Windows client | Surface Hub | HoloLens | IoT Core |
+| --- | :---: | :---: | :---: | :---: |
+| [EnableLocation](#enablelocation) | | | | ✔️ |
## EnableLocation
diff --git a/windows/configuration/wcd/wcd-maps.md b/windows/configuration/wcd/wcd-maps.md
index b92e27c14e..51aacf0da3 100644
--- a/windows/configuration/wcd/wcd-maps.md
+++ b/windows/configuration/wcd/wcd-maps.md
@@ -18,11 +18,11 @@ Use for settings related to Maps.
## Applies to
-| Setting | Desktop editions | Mobile editions | Surface Hub | HoloLens | IoT Core |
-| --- | :---: | :---: | :---: | :---: | :---: |
-| [ChinaVariantWin10](#chinavariantwin10) | ✔️ | ✔️ | ✔️ | | |
-| [UseExternalStorage](#useexternalstorage) | ✔️ | ✔️ | ✔️ | | |
-| [UseSmallerCache](#usesmallercache) | ✔️ | ✔️ | ✔️ | | |
+| Setting | Windows client | Surface Hub | HoloLens | IoT Core |
+| --- | :---: | :---: | :---: | :---: |
+| [ChinaVariantWin10](#chinavariantwin10) | ✔️ | ✔️ | | |
+| [UseExternalStorage](#useexternalstorage) | ✔️ | ✔️ | | |
+| [UseSmallerCache](#usesmallercache) | ✔️ | ✔️ | | |
## ChinaVariantWin10
diff --git a/windows/configuration/wcd/wcd-networkproxy.md b/windows/configuration/wcd/wcd-networkproxy.md
index e19c13f19c..957bc2abd1 100644
--- a/windows/configuration/wcd/wcd-networkproxy.md
+++ b/windows/configuration/wcd/wcd-networkproxy.md
@@ -18,9 +18,9 @@ Use for settings related to NetworkProxy.
## Applies to
-| Setting | Desktop editions | Mobile editions | Surface Hub | HoloLens | IoT Core |
-| --- | :---: | :---: | :---: | :---: | :---: |
-| All settings | | | ✔️ | | |
+| Setting | Windows client | Surface Hub | HoloLens | IoT Core |
+| --- | :---: | :---: | :---: | :---: |
+| All settings | | ✔️ | | |
## AutoDetect
diff --git a/windows/configuration/wcd/wcd-networkqospolicy.md b/windows/configuration/wcd/wcd-networkqospolicy.md
index 80e515c380..177a49d274 100644
--- a/windows/configuration/wcd/wcd-networkqospolicy.md
+++ b/windows/configuration/wcd/wcd-networkqospolicy.md
@@ -18,9 +18,9 @@ Use to create network Quality of Service (QoS) policies. A QoS policy performs a
## Applies to
-| Setting | Desktop editions | Mobile editions | Surface Hub | HoloLens | IoT Core |
-| --- | :---: | :---: | :---: | :---: | :---: |
-| All settings | | | ✔️ | | |
+| Setting | Windows client | Surface Hub | HoloLens | IoT Core |
+| --- | :---: | :---: | :---: | :---: |
+| All settings | | ✔️ | | |
1. In **Available customizations**, select **NetworkQ0SPolicy**, enter a friendly name for the account, and then click **Add**.
2. In **Available customizations**, select the name that you just created. The following table describes the settings you can configure.
diff --git a/windows/configuration/wcd/wcd-oobe.md b/windows/configuration/wcd/wcd-oobe.md
index 4245590994..9110aeec1d 100644
--- a/windows/configuration/wcd/wcd-oobe.md
+++ b/windows/configuration/wcd/wcd-oobe.md
@@ -18,35 +18,21 @@ Use to configure settings for the [Out Of Box Experience (OOBE)](/windows-hardwa
## Applies to
-| Setting | Desktop editions | Mobile editions | Surface Hub | HoloLens | IoT Core |
-| --- | :---: | :---: | :---: | :---: | :---: |
-| [Desktop > EnableCortanaVoice](#enablecortanavoice) | ✔️ | | | | |
-| [Desktop > HideOobe](#hided) | ✔️ | | | | |
-| [Mobile > EnforceEnterpriseProvisioning](#nforce) | | ✔️ | | | |
-| [Mobile > HideOobe](#hidem) | | ✔️ | | | |
-
-
-
+| Setting | Windows client | Surface Hub | HoloLens | IoT Core |
+| --- | :---: | :---: | :---: | :---: |
+| [Desktop > EnableCortanaVoice](#enablecortanavoice) | ✔️ | | | |
+| [Desktop > HideOobe](#hideoobe-for-desktop) | ✔️ | | | |
## EnableCortanaVoice
Use this setting to control whether Cortana voice-over is enabled during OOBE. The voice-over is disabled by default on Windows 10 Pro, Education, and Enterprise. The voice-over is enabled by default on Windows 10 Home. Select **True** to enable voice-over during OOBE, or **False** to disable voice-over during OOBE.
-
## HideOobe for desktop
When set to **True**, it hides the interactive OOBE flow for Windows 10.
->[!NOTE]
->You must create a user account if you set the value to true or the device will not be usable.
+> [!NOTE]
+> You must create a user account if you set the value to true or the device will not be usable.
When set to **False**, the OOBE screens are displayed.
-
-## EnforceEnterpriseProvisioning
-
-When set to **True**, it forces the OOBE flow into using the enterprise provisioning page without making the user interact with the Windows button. This is the default setting.
-
-When set to **False**, it does not force the OOBE flow to the enterprise provisioning page.
-
-
diff --git a/windows/configuration/wcd/wcd-personalization.md b/windows/configuration/wcd/wcd-personalization.md
index 08af869bd0..18b6259bdc 100644
--- a/windows/configuration/wcd/wcd-personalization.md
+++ b/windows/configuration/wcd/wcd-personalization.md
@@ -18,12 +18,12 @@ Use to configure settings to personalize a PC.
## Applies to
-| Setting | Desktop editions | Mobile editions | Surface Hub | HoloLens | IoT Core |
-| --- | :---: | :---: | :---: | :---: | :---: |
-| [DeployDesktopImage](#deploydesktopimage) | ✔️ | | | | |
-| [DeployLockScreenImage](#deploylockscreenimage) | ✔️ | | | | |
-| [DesktopImageUrl](#desktopimageurl) | ✔️ | | | | |
-| [LockScreenImageUrl](#lockscreenimageurl) | ✔️ | | | | |
+| Setting | Windows client | Surface Hub | HoloLens | IoT Core |
+| --- | :---: | :---: | :---: | :---: |
+| [DeployDesktopImage](#deploydesktopimage) | ✔️ | | | |
+| [DeployLockScreenImage](#deploylockscreenimage) | ✔️ | | | |
+| [DesktopImageUrl](#desktopimageurl) | ✔️ | | | |
+| [LockScreenImageUrl](#lockscreenimageurl) | ✔️ | | | |
## DeployDesktopImage
diff --git a/windows/configuration/wcd/wcd-policies.md b/windows/configuration/wcd/wcd-policies.md
index 1d9c4d1eee..f7629487bb 100644
--- a/windows/configuration/wcd/wcd-policies.md
+++ b/windows/configuration/wcd/wcd-policies.md
@@ -18,315 +18,316 @@ This section describes the **Policies** settings that you can configure in [prov
## AboveLock
-| Setting | Description | Desktop editions | Mobile editions | Surface Hub | HoloLens | IoT Core |
-| --- | --- | :---: | :---: | :---: | :---: | :---: |
-| [AllowActionCenterNotifications](/windows/client-management/mdm/policy-configuration-service-provider#abovelock-allowactioncenternotifications) | Allow Action Center notifications above the device lock screen. | | ✔️ | | | |
-| [AllowToasts](/windows/client-management/mdm/policy-configuration-service-provider#abovelock-allowtoasts) | Allow toast notifications above the device lock screen. | ✔️ | ✔️ | | | |
+| Setting | Description | Windows client | Surface Hub | HoloLens | IoT Core |
+| --- | --- | :---: | :---: | :---: | :---: |
+| [AllowActionCenterNotifications](/windows/client-management/mdm/policy-configuration-service-provider#abovelock-allowactioncenternotifications) | Allow Action Center notifications above the device lock screen. | | | | |
+| [AllowToasts](/windows/client-management/mdm/policy-configuration-service-provider#abovelock-allowtoasts) | Allow toast notifications above the device lock screen. | ✔️ | | | |
## Accounts
-| Setting | Description | Desktop editions | Mobile editions | Surface Hub | HoloLens | IoT Core |
-| --- | --- | :---: | :---: | :---: | :---: | :---: |
-| [AllowAddingNonMicrosoftAccountManually](/windows/client-management/mdm/policy-configuration-service-provider#accounts-allowaddingnonmicrosoftaccountsmanually) | Whether users can add non-Microsoft email accounts | ✔️ | ✔️ | | | |
-| [AllowMicrosoftAccountConnection](/windows/client-management/mdm/policy-configuration-service-provider#accounts-allowmicrosoftaccountconnection) | Whether users can use a Microsoft account for non-email-related connection authentication and services | ✔️ | ✔️ | | ✔️ | |
-| [AllowMicrosoftAccountSigninAssistant](/windows/client-management/mdm/policy-configuration-service-provider#accounts-allowmicrosoftaccountsigninassistant) | Disable the **Microsoft Account Sign-In Assistant** (wlidsvc) NT service | ✔️ | ✔️ | | | |
-| [DomainNamesForEmailSync](/windows/client-management/mdm/policy-configuration-service-provider#accounts-domainnamesforemailsync) | List of domains that are allowed to sync email on the devices | ✔️ | ✔️ | | | |
+| Setting | Description | Windows client | Surface Hub | HoloLens | IoT Core |
+| --- | --- | :---: | :---: | :---: | :---: |
+| [AllowAddingNonMicrosoftAccountManually](/windows/client-management/mdm/policy-configuration-service-provider#accounts-allowaddingnonmicrosoftaccountsmanually) | Whether users can add non-Microsoft email accounts | ✔️ | | | |
+| [AllowMicrosoftAccountConnection](/windows/client-management/mdm/policy-configuration-service-provider#accounts-allowmicrosoftaccountconnection) | Whether users can use a Microsoft account for non-email-related connection authentication and services | ✔️ | | ✔️ | |
+| [AllowMicrosoftAccountSigninAssistant](/windows/client-management/mdm/policy-configuration-service-provider#accounts-allowmicrosoftaccountsigninassistant) | Disable the **Microsoft Account Sign-In Assistant** (wlidsvc) NT service | ✔️ | | | |
+| [DomainNamesForEmailSync](/windows/client-management/mdm/policy-configuration-service-provider#accounts-domainnamesforemailsync) | List of domains that are allowed to sync email on the devices | ✔️ | | | |
## ApplicationDefaults
-| Setting | Description | Desktop editions | Mobile editions | Surface Hub | HoloLens | IoT Core |
-| --- | --- | :---: | :---: | :---: | :---: | :---: |
-| [DefaultAssociationsConfiguration](/windows/client-management/mdm/policy-configuration-service-provider#applicationdefaults-defaultassociationsconfiguration) | Set default file type and protocol associations | ✔️ | | | | |
+| Setting | Description | Windows client | Surface Hub | HoloLens | IoT Core |
+| --- | --- | :---: | :---: | :---: | :---: |
+| [DefaultAssociationsConfiguration](/windows/client-management/mdm/policy-configuration-service-provider#applicationdefaults-defaultassociationsconfiguration) | Set default file type and protocol associations | ✔️ | | | |
## ApplicationManagement
-| Setting | Description | Desktop editions | Mobile editions | Surface Hub | HoloLens | IoT Core |
-| --- | --- | :---: | :---: | :---: | :---: | :---: |
-| [AllowAllTrustedApps](/windows/client-management/mdm/policy-configuration-service-provider#applicationmanagement-allowalltrustedapps) | Whether non-Microsoft Store apps are allowed | ✔️ | ✔️ | | | ✔️ |
-| [AllowAppStoreAutoUpdate](/windows/client-management/mdm/policy-configuration-service-provider#applicationmanagement-allowappstoreautoupdate) | Whether automatic update of apps from Microsoft Store is allowed | ✔️ | ✔️ | | | ✔️ |
-| [AllowDeveloperUnlock](/windows/client-management/mdm/policy-configuration-service-provider#applicationmanagement-allowdeveloperunlock) | Whether developer unlock of device is allowed | ✔️ | ✔️ | ✔️ | ✔️ | ✔️ |
-| [AllowGameDVR](/windows/client-management/mdm/policy-configuration-service-provider#applicationmanagement-allowgamedvr) |Whether DVR and broadcasting is allowed | ✔️ | | | | |
-| [AllowSharedUserAppData](/windows/client-management/mdm/policy-configuration-service-provider#applicationmanagement-allowshareduserappdata) | Whether multiple users of the same app can share data | ✔️ | ✔️ | | | |
-| [AllowStore](/windows/client-management/mdm/policy-configuration-service-provider#applicationmanagement-allowstore) | Whether app store is allowed at device | | ✔️ | | | |
-| [ApplicationRestrictions](/windows/client-management/mdm/policy-configuration-service-provider#applicationmanagement-applicationrestrictions) | An XML blob that specifies app restrictions, such as an allow list, disallow list, etc. | | ✔️ | | | |
-| [LaunchAppAfterLogOn](/windows/client-management/mdm/policy-configuration-service-provider#applicationmanagement-launchappafterlogon) |Whether to launch an app or apps when the user signs in. | ✔️ | | | | |
-| [RestrictAppDataToSystemVolume](/windows/client-management/mdm/policy-configuration-service-provider#applicationmanagement-restrictappdatatosystemvolume) | Whether app data is restricted to the system drive | ✔️ | ✔️ | | | ✔️ |
-| [RestrictAppToSystemVolume](/windows/client-management/mdm/policy-configuration-service-provider#applicationmanagement-restrictapptosystemvolume) | Whether the installation of apps is restricted to the system drive | ✔️ | ✔️ | | | ✔️ |
+| Setting | Description | Windows client | Surface Hub | HoloLens | IoT Core |
+| --- | --- | :---: | :---: | :---: | :---: |
+| [AllowAllTrustedApps](/windows/client-management/mdm/policy-configuration-service-provider#applicationmanagement-allowalltrustedapps) | Whether non-Microsoft Store apps are allowed | ✔️ | | | ✔️ |
+| [AllowAppStoreAutoUpdate](/windows/client-management/mdm/policy-configuration-service-provider#applicationmanagement-allowappstoreautoupdate) | Whether automatic update of apps from Microsoft Store is allowed | ✔️ | | | ✔️ |
+| [AllowDeveloperUnlock](/windows/client-management/mdm/policy-configuration-service-provider#applicationmanagement-allowdeveloperunlock) | Whether developer unlock of device is allowed | ✔️ | ✔️ | ✔️ | ✔️ |
+| [AllowGameDVR](/windows/client-management/mdm/policy-configuration-service-provider#applicationmanagement-allowgamedvr) |Whether DVR and broadcasting is allowed | ✔️ | | | |
+| [AllowSharedUserAppData](/windows/client-management/mdm/policy-configuration-service-provider#applicationmanagement-allowshareduserappdata) | Whether multiple users of the same app can share data | ✔️ | | | |
+| [AllowStore](/windows/client-management/mdm/policy-configuration-service-provider#applicationmanagement-allowstore) | Whether app store is allowed at device | | | | |
+| [ApplicationRestrictions](/windows/client-management/mdm/policy-configuration-service-provider#applicationmanagement-applicationrestrictions) | An XML blob that specifies app restrictions, such as an allow list, disallow list, etc. | | | | |
+| [LaunchAppAfterLogOn](/windows/client-management/mdm/policy-configuration-service-provider#applicationmanagement-launchappafterlogon) |Whether to launch an app or apps when the user signs in. | ✔️ | | | |
+| [RestrictAppDataToSystemVolume](/windows/client-management/mdm/policy-configuration-service-provider#applicationmanagement-restrictappdatatosystemvolume) | Whether app data is restricted to the system drive | ✔️ | | | ✔️ |
+| [RestrictAppToSystemVolume](/windows/client-management/mdm/policy-configuration-service-provider#applicationmanagement-restrictapptosystemvolume) | Whether the installation of apps is restricted to the system drive | ✔️ | | | ✔️ |
## Authentication
-| Setting | Description | Desktop editions | Mobile editions | Surface Hub | HoloLens | IoT Core |
-| --- | --- | :---: | :---: | :---: | :---: | :---: |
-| [AllowFastReconnect](/windows/client-management/mdm/policy-csp-authentication#authentication-allowfastreconnect) | Allows EAP Fast Reconnect from being attempted for EAP Method TLS. | ✔️ | ✔️ | ✔️ | ✔️ | ✔️ |
-| [EnableFastFirstSignin](/windows/client-management/mdm/policy-csp-authentication#authentication-enablefastfirstsignin) | Enables a quick first sign-in experience for a user by automatically connecting new non-admin Azure AD accounts to the pre-configured candidate local accounts. | ✔️ | ✔️ | ✔️ | | ✔️ |
-| [EnableWebSignin](/windows/client-management/mdm/policy-csp-authentication#authentication-enablewebsignin) | Enables Windows logon support for non-ADFS federated providers (e.g. SAML). | ✔️ | ✔️ | ✔️ | | ✔️ |
-| [PreferredAadTenantDomainName](/windows/client-management/mdm/policy-csp-authentication#authentication-preferredaadtenantdomainname) | Specifies the preferred domain among available domains in the Azure AD tenant. | ✔️ | ✔️ | ✔️ | | ✔️ |
+| Setting | Description | Windows client | Surface Hub | HoloLens | IoT Core |
+| --- | --- | :---: | :---: | :---: | :---: |
+| [AllowFastReconnect](/windows/client-management/mdm/policy-csp-authentication#authentication-allowfastreconnect) | Allows EAP Fast Reconnect from being attempted for EAP Method TLS. | ✔️ | ✔️ | ✔️ | ✔️ |
+| [EnableFastFirstSignin](/windows/client-management/mdm/policy-csp-authentication#authentication-enablefastfirstsignin) | Enables a quick first sign-in experience for a user by automatically connecting new non-admin Azure AD accounts to the pre-configured candidate local accounts. | ✔️ | ✔️ | | ✔️ |
+| [EnableWebSignin](/windows/client-management/mdm/policy-csp-authentication#authentication-enablewebsignin) | Enables Windows logon support for non-ADFS federated providers (e.g. SAML). | ✔️ | ✔️ | | ✔️ |
+| [PreferredAadTenantDomainName](/windows/client-management/mdm/policy-csp-authentication#authentication-preferredaadtenantdomainname) | Specifies the preferred domain among available domains in the Azure AD tenant. | ✔️ | ✔️ | | ✔️ |
## BitLocker
-| Setting | Description | Desktop editions | Mobile editions | Surface Hub | HoloLens | IoT Core |
-| --- | --- | :---: | :---: | :---: | :---: | :---: |
-| [EncryptionMethod](/windows/client-management/mdm/policy-configuration-service-provider#bitlocker-encryptionmethod) | Specify BitLocker drive encryption method and cipher strength | ✔️ | ✔️ | | | |
+| Setting | Description | Windows client | Surface Hub | HoloLens | IoT Core |
+| --- | --- | :---: | :---: | :---: | :---: |
+| [EncryptionMethod](/windows/client-management/mdm/policy-configuration-service-provider#bitlocker-encryptionmethod) | Specify BitLocker drive encryption method and cipher strength | ✔️ | | | |
## Bluetooth
-| Setting | Description | Desktop editions | Mobile editions | Surface Hub | HoloLens | IoT Core |
-| --- | --- | :---: | :---: | :---: | :---: | :---: |
-| [AllowAdvertising](/windows/client-management/mdm/policy-configuration-service-provider#bluetooth-allowadvertising) | Whether the device can send out Bluetooth advertisements | ✔️ | ✔️ | ✔️ | ✔️ | ✔️ |
-| [AllowDiscoverableMode](/windows/client-management/mdm/policy-configuration-service-provider#bluetooth-allowdiscoverablemode) | Whether other Bluetooth-enabled devices can discover the device | ✔️ | ✔️ | ✔️ | ✔️ | ✔️ |
-| [AllowPrepairing](/windows/client-management/mdm/policy-configuration-service-provider#bluetooth-allowprepairing) | Whether to allow specific bundled Bluetooth peripherals to automatically pair with the host device | ✔️ | ✔️ | ✔️ | ✔️ | ✔️ |
-| AllowPromptedProximalConnections | Whether Windows will prompt users when Bluetooth devices that are connectable are in range of the user's device | ✔️ | ✔️ | ✔️ | ✔️ | ✔️ |
-| [LocalDeviceName](/windows/client-management/mdm/policy-configuration-service-provider#bluetooth-localdevicename) | Set the local Bluetooth device name | ✔️ | ✔️ | ✔️ | ✔️ | ✔️ |
-| [ServicesAllowedList](/windows/client-management/mdm/policy-configuration-service-provider#bluetooth-servicesallowedlist) | Set a list of allowable services and profiles | ✔️ | ✔️ | ✔️ | ✔️ | ✔️ |
+| Setting | Description | Windows client | Surface Hub | HoloLens | IoT Core |
+| --- | --- | :---: | :---: | :---: | :---: |
+| [AllowAdvertising](/windows/client-management/mdm/policy-configuration-service-provider#bluetooth-allowadvertising) | Whether the device can send out Bluetooth advertisements | ✔️ | ✔️ | ✔️ | ✔️ |
+| [AllowDiscoverableMode](/windows/client-management/mdm/policy-configuration-service-provider#bluetooth-allowdiscoverablemode) | Whether other Bluetooth-enabled devices can discover the device | ✔️ | ✔️ | ✔️ | ✔️ |
+| [AllowPrepairing](/windows/client-management/mdm/policy-configuration-service-provider#bluetooth-allowprepairing) | Whether to allow specific bundled Bluetooth peripherals to automatically pair with the host device | ✔️ | ✔️ | ✔️ | ✔️ |
+| AllowPromptedProximalConnections | Whether Windows will prompt users when Bluetooth devices that are connectable are in range of the user's device | ✔️ | ✔️ | ✔️ | ✔️ |
+| [LocalDeviceName](/windows/client-management/mdm/policy-configuration-service-provider#bluetooth-localdevicename) | Set the local Bluetooth device name | ✔️ | ✔️ | ✔️ | ✔️ |
+| [ServicesAllowedList](/windows/client-management/mdm/policy-configuration-service-provider#bluetooth-servicesallowedlist) | Set a list of allowable services and profiles | ✔️ | ✔️ | ✔️ | ✔️ |
## Browser
-| Setting | Description | Desktop editions | Mobile editions | Surface Hub | HoloLens | IoT Core |
-| --- | --- | :---: | :---: | :---: | :---: | :---: |
-| [AllowAddressBarDropdown](/windows/client-management/mdm/policy-configuration-service-provider#browser-allowaddressbardropdown) | Specify whether to allow the address bar drop-down functionality in Microsoft Edge. If you want to minimize network connections from Microsoft Edge to Microsoft services, we recommend disabling this functionality. | ✔️ | | | | |
-| [AllowAutofill](/windows/client-management/mdm/policy-configuration-service-provider#browser-allowautofill) | Specify whether autofill on websites is allowed. | ✔️ | ✔️ | ✔️ | | ✔️ |
-| [AllowBrowser](/windows/client-management/mdm/policy-configuration-service-provider#browser-allowbrowser) | Specify whether the browser is allowed on the device (for Windows 10, version 1803 and earlier only). | ✔️ | ✔️ | | | |
-[AllowConfigurationUpdateForBooksLibrary](/windows/client-management/mdm/policy-csp-browser#browser-allowconfigurationupdateforbookslibrary) | Specify whether Microsoft Edge can automatically update the configuration data for the Books Library. | ✔️ | ✔️ | | | |
-| [AllowCookies](/windows/client-management/mdm/policy-configuration-service-provider#browser-allowcookies) | Specify whether cookies are allowed. | ✔️ | ✔️ | ✔️ | | ✔️ |
-| [AllowDeveloperTools](/windows/client-management/mdm/policy-configuration-service-provider#browser-allowdevelopertools) | Specify whether employees can use F12 Developer Tools on Microsoft Edge. | ✔️ | | | | |
-| [AllowDoNotTrack](/windows/client-management/mdm/policy-configuration-service-provider#browser-allowdonottrack) | Specify whether Do Not Track headers are allowed. | ✔️ | ✔️ | ✔️ | | ✔️ |
-| [AllowExtensions](/windows/client-management/mdm/policy-configuration-service-provider#browser-allowextensions) | Specify whether Microsoft Edge extensions are allowed. | ✔️ | | | | |
-| [AllowFlash](/windows/client-management/mdm/policy-configuration-service-provider#browser-allowflash) | Specify whether Adobe Flash can run in Microsoft Edge. | ✔️ | | | | |
-| [AllowFlashClickToRun](/windows/client-management/mdm/policy-configuration-service-provider#browser-allowflashclicktorun) | Specify whether users must take an action, such as clicking the content or a Click-to-Run button, before seeing content in Adobe Flash. | ✔️ | | | | |
-| [AllowFullScreenMode](/windows/client-management/mdm/policy-configuration-service-provider#browser-allowfullscreenmode) | Specify whether full-screen mode is allowed. | ✔️ | ✔️ | ✔️ | | ✔️ |
-| [AllowInPrivate](/windows/client-management/mdm/policy-configuration-service-provider#browser-allowinprivate) | Specify whether InPrivate browsing is allowed on corporate networks. | ✔️ | ✔️ | ✔️ | | ✔️ |
-| [AllowMicrosoftCompatibilityList](/windows/client-management/mdm/policy-configuration-service-provider#browser-allowmicrosoftcompatibilitylist) | Specify whether to use the Microsoft compatibility list in Microsoft Edge. | ✔️ | ✔️ | ✔️ | | ✔️ |
-| [AllowPasswordManager](/windows/client-management/mdm/policy-configuration-service-provider#browser-allowpasswordmanager) | Specify whether saving and managing passwords locally on the device is allowed. | ✔️ | ✔️ | ✔️ | | ✔️ |
-| [AllowPopups](/windows/client-management/mdm/policy-configuration-service-provider#browser-allowpopups) | Specify whether pop-up blocker is allowed or enabled. | ✔️ | | | ✔️ | |
-| [AllowPrelaunch](/windows/client-management/mdm/policy-csp-browser#browser-allowprelaunch) | Specify whether Microsoft Edge can pre-launch as a background process during Windows startup when the system is idle waiting to be launched by the user. | ✔️ | | | | |
-| [AllowPrinting](/windows/client-management/mdm/policy-csp-browser#browser-allowprinting) | Specify whether users can print web content in Microsoft Edge. | ✔️ | ✔️ | ✔️ | | ✔️ |
-| [AllowSavingHistory](/windows/client-management/mdm/policy-csp-browser#browser-allowsavinghistory) | Specify whether Microsoft Edge saves the browsing history. | ✔️ | | | | |
-| [AllowSearchEngineCustomization](/windows/client-management/mdm/policy-configuration-service-provider#browser-allowsearchenginecustomization) | Allow search engine customization for MDM-enrolled devices. | ✔️ | ✔️ | ✔️ | | ✔️ |
-| [AllowSearchSuggestionsinAddressBar](/windows/client-management/mdm/policy-configuration-service-provider#browser-allowsearchsuggestionsinaddressbar) | Specify whether search suggestions are allowed in the address bar. | ✔️ | ✔️ | ✔️ | | ✔️ |
-| [AllowSideloadingOfExtensions](/windows/client-management/mdm/policy-csp-browser#browser-allowsideloadingofextensions) | Specify whether extensions can be sideloaded in Microsoft Edge. | ✔️ | | | | |
-| [AllowSmartScreen](/windows/client-management/mdm/policy-configuration-service-provider#browser-allowsmartscreen) | Specify whether Windows Defender SmartScreen is allowed. | ✔️ | ✔️ | ✔️ | ✔️ | ✔️ |
-| [AllowTabPreloading](/windows/client-management/mdm/policy-csp-browser#browser-allowtabpreloading) | Specify whether preloading the Start and New tab pages during Windows sign-in is allowed. | ✔️ | | | | |
-| [AllowWebContentOnNewTabPage](/windows/client-management/mdm/policy-csp-browser#browser-allowwebcontentonnewtabpage) | Specify whether a New tab page opens with the default content or a blank page. | ✔️ | ✔️ | ✔️ | | ✔️ |
-[AlwaysEnableBooksLibrary](/windows/client-management/mdm/policy-csp-browser#browser-alwaysenablebookslibrary) | Always show the Books Library in Microsoft Edge. | ✔️ | ✔️ | | | |
-| [ClearBrowsingDataOnExit](/windows/client-management/mdm/policy-configuration-service-provider#browser-clearbrowsingdataonexit) | Specify whether to clear browsing data when exiting Microsoft Edge. | ✔️ | | | | |
-| [ConfigureAdditionalSearchEngines](/windows/client-management/mdm/policy-configuration-service-provider#browser-configureadditionalsearchengines) | Allows you to add up to 5 additional search engines for MDM-enrolled devices. | ✔️ | ✔️ | ✔️ | | ✔️ |
-| [ConfigureFavoritesBar](/windows/client-management/mdm/policy-csp-browser#browser-configurefavoritesbar) | Specify whether the Favorites bar is shown or hidden on all pages. | ✔️ | | | | |
-| [ConfigureHomeButton](/windows/client-management/mdm/policy-csp-browser#browser-configurehomebutton) | Configure whether the Home button will be shown, and what should happen when it is selected. You should also configure the [SetHomeButtonURL](/windows/client-management/mdm/policy-csp-browser#browser-sethomebuttonurl) setting. To configure this setting and also allow users to make changes to the Home button, see the [UnlockHomeButton](/windows/client-management/mdm/policy-csp-browser#browser-unlockhomebutton) setting. | ✔️ | | | | |
-| [ConfigureKioskMode](/windows/client-management/mdm/policy-csp-browser#browser-configurekioskmode) | Configure how Microsoft Edge operates when it's running in kiosk mode, either as a single-app kiosk or as one of multiple apps running on the kiosk device. | ✔️ | | | | |
-| [ConfigureKioskResetAfterIdleTimeout](/windows/client-management/mdm/policy-csp-browser#browser-configurekioskresetafteridletimeout) | Specify the time, in minutes, after which Microsoft Edge running in kiosk mode resets to the default kiosk configuration. | ✔️ | | | | |
-| [ConfigureOpenMicrosoftEdgeWith](/windows/client-management/mdm/policy-csp-browser#browser-configureopenmicrosoftedgewith) | Specify which pages should load when Microsoft Edge opens. You should also configure the [ConfigureStartPages](/windows/client-management/mdm/policy-csp-browser#browser-configurestartpages) setting and [DisableLockdownOfStartPages](/windows/client-management/mdm/policy-configuration-service-provider#browser-disablelockdownofstartpages) setting. | ✔️ | | | | |
-| [ConfigureTelemetryForMicrosoft365Analytics](/windows/client-management/mdm/policy-csp-browser#browser-configuretelemetryformicrosoft365analytics) | Specify whether to send Microsoft Edge browsing history data to Microsoft 365 Analytics. | ✔️ | | | | |
-| [DisableLockdownOfStartPages](/windows/client-management/mdm/policy-configuration-service-provider#browser-disablelockdownofstartpages) | Specify whether the lockdown on the Start pages is disabled. | ✔️ | | | | |
-[EnableExtendedBooksTelemetry](/windows/client-management/mdm/policy-csp-browser#browser-enableextendedbookstelemetry) | Enable this setting to send additional diagnostic data, on top of the basic diagnostic data, from the Books tab. | ✔️ | ✔️ | | | |
-| [EnterpriseModeSiteList](/windows/client-management/mdm/policy-configuration-service-provider#browser-enterprisemodesitelist) | Allow the user to specify a URL of an enterprise site list. | ✔️ | | | | |
-| [EnterpriseSiteListServiceUrl](/windows/client-management/mdm/policy-csp-browser#browser-enterprisesitelistserviceurl) | This policy (introduced in Windows 10, version 1507) was deprecated in Windows 10, version 1511 by [Browser/EnterpriseModeSiteList](/windows/client-management/mdm/policy-configuration-service-provider#browser-enterprisemodesitelist). | ✔️ | | | | |
-| [FirstRunURL](/windows/client-management/mdm/policy-configuration-service-provider#browser-firstrunurl) | Specify the URL that Microsoft Edge will use when it is opened for the first time. | ✔️ | ✔️ | | | |
-| [HomePages](/windows/client-management/mdm/policy-configuration-service-provider#browser-homepages) | Specify your Start pages for MDM-enrolled devices. | ✔️ | | | | |
-[LockdownFavorites](/windows/client-management/mdm/policy-csp-browser#browser-lockdownfavorites) | Configure whether employees can add, import, sort, or edit the Favorites list in Microsoft Edge. | ✔️ | ✔️ | | | |
-| [PreventAccessToAboutFlagsInMicrosoftEdge](/windows/client-management/mdm/policy-configuration-service-provider#browser-preventaccesstoaboutflagsinmicrosoftedge) | Specify whether users can access the **about:flags** page, which is used to change developer settings and to enable experimental features. | ✔️ | ✔️ | ✔️ | | ✔️ |
-| [PreventCertErrorOverrides](/windows/client-management/mdm/policy-csp-browser#browser-preventcerterroroverrides) | Specify whether to override security warnings about sites that have SSL errors. | ✔️ | ✔️ | ✔️ | | ✔️ |
-| [PreventFirstRunPage](/windows/client-management/mdm/policy-configuration-service-provider#browser-preventfirstrunpage) | Specify whether to enable or disable the First Run webpage. | ✔️ | | | | |
-| [PreventLiveTileDataCollection](/windows/client-management/mdm/policy-configuration-service-provider#browser-preventlivetiledatacollection) | Specify whether Microsoft can collect information to create a Live Tile when pinning a site to Start from Microsoft Edge. | ✔️ | ✔️ | ✔️ | | ✔️ |
-| [PreventSmartScreenPromptOverride](/windows/client-management/mdm/policy-configuration-service-provider#browser-preventsmartscreenpromptoverride) | Specify whether users can override the Windows Defender SmartScreen warnings about potentially malicious websites. | ✔️ | ✔️ | ✔️ | | ✔️ |
-| [PreventSmartScreenPromptOverrideForFiles](/windows/client-management/mdm/policy-configuration-service-provider#browser-preventsmartscreenpromptoverrideforfiles) | Specify whether users can override the Windows Defender SmartScreen warnings about downloading unverified files. | ✔️ | ✔️ | ✔️ | | ✔️ |
-PreventTabPreloading | Prevent Microsoft Edge from starting and loading the Start and New Tab page at Windows startup and each time Microsoft Edge is closed. Applies to Windows 10, version 1803 and earlier only. | ✔️ | | | | |
-| [PreventTurningOffRequiredExtensions](/windows/client-management/mdm/policy-configuration-service-provider#browser-forceenabledextensions) | Enter a list of extensions in Microsoft Edge that users cannot turn off, using a semi-colon delimited list of extension package family names. | ✔️ | | | | |
-| [PreventUsingLocalHostIPAddressForWebRTC](/windows/client-management/mdm/policy-configuration-service-provider#browser-preventusinglocalhostipaddressforwebrtc) | Specify whether a user's localhost IP address is displayed while making phone calls using the WebRTC protocol. | ✔️ | ✔️ | ✔️ | | ✔️ |
-[ProvisionFavorites](/windows/client-management/mdm/policy-csp-browser#browser-provisionfavorites) | Configure a default set of favorites which will appear for employees. | ✔️ | ✔️ | | | |
-| [SendIntranetTraffictoInternetExplorer](/windows/client-management/mdm/policy-configuration-service-provider#browser-sendintranettraffictointernetexplorer) | Specify whether to send intranet traffic to Internet Explorer. | ✔️ | | | | |
-| [SetDefaultSearchEngine](/windows/client-management/mdm/policy-configuration-service-provider#browser-setdefaultsearchengine) | Configure the default search engine for your employees. | ✔️ | ✔️ | ✔️ | | ✔️ |
-| [SetHomeButtonURL](/windows/client-management/mdm/policy-csp-browser#browser-sethomebuttonurl) | Specify a custom URL for the Home button. You should also enable the [ConfigureHomeButton](/windows/client-management/mdm/policy-csp-browser#browser-configurehomebutton) setting and select the **Show the home button; clicking the home button loads a specific URL** option. | ✔️ | | | | |
-| [SetNewTabPageURL](/windows/client-management/mdm/policy-csp-browser#browser-setnewtabpageurl) | Specify a custom URL for a New tab page. | ✔️ | | | | |
-| [ShowMessageWhenOpeningSitesInInternetExplorer](/windows/client-management/mdm/policy-configuration-service-provider#browser-showmessagewhenopeningsitesininternetexplorer) | Specify whether users should see a full interstitial page in Microsoft Edge when opening sites that are configured to open in Internet Explorer using the Enterprise Site list. | ✔️ | | | | |
-| [SyncFavoritesBetweenIEAndMicrosoftEdge](/windows/client-management/mdm/policy-configuration-service-provider#browser-syncfavoritesbetweenieandmicrosoftedge) | Specify whether favorites are kept in sync between Internet Explorer and Microsoft Edge. | ✔️ | | | | |
-| [UnlockHomeButton](/windows/client-management/mdm/policy-csp-browser#browser-unlockhomebutton) | Specify whether users can make changes to the Home button. | ✔️ | | | | |
-[UseSharedFolderForBooks](/windows/client-management/mdm/policy-csp-browser#browser-usesharedfolderforbooks) | Specify whether organizations should use a folder shared across users to store books from the Books Library. | ✔️ | ✔️ | | | |
+| Setting | Description | Windows client | Surface Hub | HoloLens | IoT Core |
+| --- | --- | :---: | :---: | :---: | :---: |
+| [AllowAddressBarDropdown](/windows/client-management/mdm/policy-configuration-service-provider#browser-allowaddressbardropdown) | Specify whether to allow the address bar drop-down functionality in Microsoft Edge. If you want to minimize network connections from Microsoft Edge to Microsoft services, we recommend disabling this functionality. | ✔️ | | | |
+| [AllowAutofill](/windows/client-management/mdm/policy-configuration-service-provider#browser-allowautofill) | Specify whether autofill on websites is allowed. | ✔️ | ✔️ | | ✔️ |
+| [AllowBrowser](/windows/client-management/mdm/policy-configuration-service-provider#browser-allowbrowser) | Specify whether the browser is allowed on the device (for Windows 10, version 1803 and earlier only). | ✔️ | | | |
+[AllowConfigurationUpdateForBooksLibrary](/windows/client-management/mdm/policy-csp-browser#browser-allowconfigurationupdateforbookslibrary) | Specify whether Microsoft Edge can automatically update the configuration data for the Books Library. | ✔️ | | | |
+| [AllowCookies](/windows/client-management/mdm/policy-configuration-service-provider#browser-allowcookies) | Specify whether cookies are allowed. | ✔️ | ✔️ | | ✔️ |
+| [AllowDeveloperTools](/windows/client-management/mdm/policy-configuration-service-provider#browser-allowdevelopertools) | Specify whether employees can use F12 Developer Tools on Microsoft Edge. | ✔️ | | | |
+| [AllowDoNotTrack](/windows/client-management/mdm/policy-configuration-service-provider#browser-allowdonottrack) | Specify whether Do Not Track headers are allowed. | ✔️ | ✔️ | | ✔️ |
+| [AllowExtensions](/windows/client-management/mdm/policy-configuration-service-provider#browser-allowextensions) | Specify whether Microsoft Edge extensions are allowed. | ✔️ | | | |
+| [AllowFlash](/windows/client-management/mdm/policy-configuration-service-provider#browser-allowflash) | Specify whether Adobe Flash can run in Microsoft Edge. | ✔️ | | | |
+| [AllowFlashClickToRun](/windows/client-management/mdm/policy-configuration-service-provider#browser-allowflashclicktorun) | Specify whether users must take an action, such as clicking the content or a Click-to-Run button, before seeing content in Adobe Flash. | ✔️ | | | |
+| [AllowFullScreenMode](/windows/client-management/mdm/policy-configuration-service-provider#browser-allowfullscreenmode) | Specify whether full-screen mode is allowed. | ✔️ | ✔️ | | ✔️ |
+| [AllowInPrivate](/windows/client-management/mdm/policy-configuration-service-provider#browser-allowinprivate) | Specify whether InPrivate browsing is allowed on corporate networks. | ✔️ | ✔️ | | ✔️ |
+| [AllowMicrosoftCompatibilityList](/windows/client-management/mdm/policy-configuration-service-provider#browser-allowmicrosoftcompatibilitylist) | Specify whether to use the Microsoft compatibility list in Microsoft Edge. | ✔️ | ✔️ | | ✔️ |
+| [AllowPasswordManager](/windows/client-management/mdm/policy-configuration-service-provider#browser-allowpasswordmanager) | Specify whether saving and managing passwords locally on the device is allowed. | ✔️ | ✔️ | | ✔️ |
+| [AllowPopups](/windows/client-management/mdm/policy-configuration-service-provider#browser-allowpopups) | Specify whether pop-up blocker is allowed or enabled. | ✔️ | | ✔️ | |
+| [AllowPrelaunch](/windows/client-management/mdm/policy-csp-browser#browser-allowprelaunch) | Specify whether Microsoft Edge can pre-launch as a background process during Windows startup when the system is idle waiting to be launched by the user. | ✔️ | | | |
+| [AllowPrinting](/windows/client-management/mdm/policy-csp-browser#browser-allowprinting) | Specify whether users can print web content in Microsoft Edge. | ✔️ | ✔️ | | ✔️ |
+| [AllowSavingHistory](/windows/client-management/mdm/policy-csp-browser#browser-allowsavinghistory) | Specify whether Microsoft Edge saves the browsing history. | ✔️ | | | |
+| [AllowSearchEngineCustomization](/windows/client-management/mdm/policy-configuration-service-provider#browser-allowsearchenginecustomization) | Allow search engine customization for MDM-enrolled devices. | ✔️ | ✔️ | | ✔️ |
+| [AllowSearchSuggestionsinAddressBar](/windows/client-management/mdm/policy-configuration-service-provider#browser-allowsearchsuggestionsinaddressbar) | Specify whether search suggestions are allowed in the address bar. | ✔️ | ✔️ | | ✔️ |
+| [AllowSideloadingOfExtensions](/windows/client-management/mdm/policy-csp-browser#browser-allowsideloadingofextensions) | Specify whether extensions can be sideloaded in Microsoft Edge. | ✔️ | | | |
+| [AllowSmartScreen](/windows/client-management/mdm/policy-configuration-service-provider#browser-allowsmartscreen) | Specify whether Windows Defender SmartScreen is allowed. | ✔️ | ✔️ | ✔️ | ✔️ |
+| [AllowTabPreloading](/windows/client-management/mdm/policy-csp-browser#browser-allowtabpreloading) | Specify whether preloading the Start and New tab pages during Windows sign-in is allowed. | ✔️ | | | |
+| [AllowWebContentOnNewTabPage](/windows/client-management/mdm/policy-csp-browser#browser-allowwebcontentonnewtabpage) | Specify whether a New tab page opens with the default content or a blank page. | ✔️ | ✔️ | | ✔️ |
+[AlwaysEnableBooksLibrary](/windows/client-management/mdm/policy-csp-browser#browser-alwaysenablebookslibrary) | Always show the Books Library in Microsoft Edge. | ✔️ | | | |
+| [ClearBrowsingDataOnExit](/windows/client-management/mdm/policy-configuration-service-provider#browser-clearbrowsingdataonexit) | Specify whether to clear browsing data when exiting Microsoft Edge. | ✔️ | | | |
+| [ConfigureAdditionalSearchEngines](/windows/client-management/mdm/policy-configuration-service-provider#browser-configureadditionalsearchengines) | Allows you to add up to 5 additional search engines for MDM-enrolled devices. | ✔️ | ✔️ | | ✔️ |
+| [ConfigureFavoritesBar](/windows/client-management/mdm/policy-csp-browser#browser-configurefavoritesbar) | Specify whether the Favorites bar is shown or hidden on all pages. | ✔️ | | | |
+| [ConfigureHomeButton](/windows/client-management/mdm/policy-csp-browser#browser-configurehomebutton) | Configure whether the Home button will be shown, and what should happen when it is selected. You should also configure the [SetHomeButtonURL](/windows/client-management/mdm/policy-csp-browser#browser-sethomebuttonurl) setting. To configure this setting and also allow users to make changes to the Home button, see the [UnlockHomeButton](/windows/client-management/mdm/policy-csp-browser#browser-unlockhomebutton) setting. | ✔️ | | | |
+| [ConfigureKioskMode](/windows/client-management/mdm/policy-csp-browser#browser-configurekioskmode) | Configure how Microsoft Edge operates when it's running in kiosk mode, either as a single-app kiosk or as one of multiple apps running on the kiosk device. | ✔️ | | | |
+| [ConfigureKioskResetAfterIdleTimeout](/windows/client-management/mdm/policy-csp-browser#browser-configurekioskresetafteridletimeout) | Specify the time, in minutes, after which Microsoft Edge running in kiosk mode resets to the default kiosk configuration. | ✔️ | | | |
+| [ConfigureOpenMicrosoftEdgeWith](/windows/client-management/mdm/policy-csp-browser#browser-configureopenmicrosoftedgewith) | Specify which pages should load when Microsoft Edge opens. You should also configure the [ConfigureStartPages](/windows/client-management/mdm/policy-csp-browser#browser-configurestartpages) setting and [DisableLockdownOfStartPages](/windows/client-management/mdm/policy-configuration-service-provider#browser-disablelockdownofstartpages) setting. | ✔️ | | | |
+| [ConfigureTelemetryForMicrosoft365Analytics](/windows/client-management/mdm/policy-csp-browser#browser-configuretelemetryformicrosoft365analytics) | Specify whether to send Microsoft Edge browsing history data to Microsoft 365 Analytics. | ✔️ | | | |
+| [DisableLockdownOfStartPages](/windows/client-management/mdm/policy-configuration-service-provider#browser-disablelockdownofstartpages) | Specify whether the lockdown on the Start pages is disabled. | ✔️ | | | |
+[EnableExtendedBooksTelemetry](/windows/client-management/mdm/policy-csp-browser#browser-enableextendedbookstelemetry) | Enable this setting to send additional diagnostic data, on top of the basic diagnostic data, from the Books tab. | ✔️ | ✔️ | | |
+| [EnterpriseModeSiteList](/windows/client-management/mdm/policy-configuration-service-provider#browser-enterprisemodesitelist) | Allow the user to specify a URL of an enterprise site list. | ✔️ | | | |
+| [EnterpriseSiteListServiceUrl](/windows/client-management/mdm/policy-csp-browser#browser-enterprisesitelistserviceurl) | This policy (introduced in Windows 10, version 1507) was deprecated in Windows 10, version 1511 by [Browser/EnterpriseModeSiteList](/windows/client-management/mdm/policy-configuration-service-provider#browser-enterprisemodesitelist). | ✔️ | | | |
+| [FirstRunURL](/windows/client-management/mdm/policy-configuration-service-provider#browser-firstrunurl) | Specify the URL that Microsoft Edge will use when it is opened for the first time. | ✔️ | | | |
+| [HomePages](/windows/client-management/mdm/policy-configuration-service-provider#browser-homepages) | Specify your Start pages for MDM-enrolled devices. | ✔️ | | | |
+[LockdownFavorites](/windows/client-management/mdm/policy-csp-browser#browser-lockdownfavorites) | Configure whether employees can add, import, sort, or edit the Favorites list in Microsoft Edge. | ✔️ | | | |
+| [PreventAccessToAboutFlagsInMicrosoftEdge](/windows/client-management/mdm/policy-configuration-service-provider#browser-preventaccesstoaboutflagsinmicrosoftedge) | Specify whether users can access the **about:flags** page, which is used to change developer settings and to enable experimental features. | ✔️ | ✔️ | | ✔️ |
+| [PreventCertErrorOverrides](/windows/client-management/mdm/policy-csp-browser#browser-preventcerterroroverrides) | Specify whether to override security warnings about sites that have SSL errors. | ✔️ | ✔️ | | ✔️ |
+| [PreventFirstRunPage](/windows/client-management/mdm/policy-configuration-service-provider#browser-preventfirstrunpage) | Specify whether to enable or disable the First Run webpage. | ✔️ | | | |
+| [PreventLiveTileDataCollection](/windows/client-management/mdm/policy-configuration-service-provider#browser-preventlivetiledatacollection) | Specify whether Microsoft can collect information to create a Live Tile when pinning a site to Start from Microsoft Edge. | ✔️ | ✔️ | | ✔️ |
+| [PreventSmartScreenPromptOverride](/windows/client-management/mdm/policy-configuration-service-provider#browser-preventsmartscreenpromptoverride) | Specify whether users can override the Windows Defender SmartScreen warnings about potentially malicious websites. | ✔️ | ✔️ | | ✔️ |
+| [PreventSmartScreenPromptOverrideForFiles](/windows/client-management/mdm/policy-configuration-service-provider#browser-preventsmartscreenpromptoverrideforfiles) | Specify whether users can override the Windows Defender SmartScreen warnings about downloading unverified files. | ✔️ | ✔️ | | ✔️ |
+PreventTabPreloading | Prevent Microsoft Edge from starting and loading the Start and New Tab page at Windows startup and each time Microsoft Edge is closed. Applies to Windows 10, version 1803 and earlier only. | ✔️ | | | |
+| [PreventTurningOffRequiredExtensions](/windows/client-management/mdm/policy-configuration-service-provider#browser-forceenabledextensions) | Enter a list of extensions in Microsoft Edge that users cannot turn off, using a semi-colon delimited list of extension package family names. | ✔️ | | | |
+| [PreventUsingLocalHostIPAddressForWebRTC](/windows/client-management/mdm/policy-configuration-service-provider#browser-preventusinglocalhostipaddressforwebrtc) | Specify whether a user's localhost IP address is displayed while making phone calls using the WebRTC protocol. | ✔️ | ✔️ | | ✔️ |
+[ProvisionFavorites](/windows/client-management/mdm/policy-csp-browser#browser-provisionfavorites) | Configure a default set of favorites which will appear for employees. | ✔️ | | | |
+| [SendIntranetTraffictoInternetExplorer](/windows/client-management/mdm/policy-configuration-service-provider#browser-sendintranettraffictointernetexplorer) | Specify whether to send intranet traffic to Internet Explorer. | ✔️ | | | |
+| [SetDefaultSearchEngine](/windows/client-management/mdm/policy-configuration-service-provider#browser-setdefaultsearchengine) | Configure the default search engine for your employees. | ✔️ | ✔️ | | ✔️ |
+| [SetHomeButtonURL](/windows/client-management/mdm/policy-csp-browser#browser-sethomebuttonurl) | Specify a custom URL for the Home button. You should also enable the [ConfigureHomeButton](/windows/client-management/mdm/policy-csp-browser#browser-configurehomebutton) setting and select the **Show the home button; clicking the home button loads a specific URL** option. | ✔️ | | | |
+| [SetNewTabPageURL](/windows/client-management/mdm/policy-csp-browser#browser-setnewtabpageurl) | Specify a custom URL for a New tab page. | ✔️ | | | |
+| [ShowMessageWhenOpeningSitesInInternetExplorer](/windows/client-management/mdm/policy-configuration-service-provider#browser-showmessagewhenopeningsitesininternetexplorer) | Specify whether users should see a full interstitial page in Microsoft Edge when opening sites that are configured to open in Internet Explorer using the Enterprise Site list. | ✔️ | | | |
+| [SyncFavoritesBetweenIEAndMicrosoftEdge](/windows/client-management/mdm/policy-configuration-service-provider#browser-syncfavoritesbetweenieandmicrosoftedge) | Specify whether favorites are kept in sync between Internet Explorer and Microsoft Edge. | ✔️ | | | |
+| [UnlockHomeButton](/windows/client-management/mdm/policy-csp-browser#browser-unlockhomebutton) | Specify whether users can make changes to the Home button. | ✔️ | | | |
+[UseSharedFolderForBooks](/windows/client-management/mdm/policy-csp-browser#browser-usesharedfolderforbooks) | Specify whether organizations should use a folder shared across users to store books from the Books Library. | ✔️ | | | |
## Camera
-| Setting | Description | Desktop editions | Mobile editions | Surface Hub | HoloLens | IoT Core |
-| --- | --- | :---: | :---: | :---: | :---: | :---: |
-| [AllowCamera](/windows/client-management/mdm/policy-configuration-service-provider#camera-allowcamera) | Disable or enable the camera. | ✔️ | ✔️ | ✔️ | | |
+| Setting | Description | Windows client | Surface Hub | HoloLens | IoT Core |
+| --- | --- | :---: | :---: | :---: | :---: |
+| [AllowCamera](/windows/client-management/mdm/policy-configuration-service-provider#camera-allowcamera) | Disable or enable the camera. | ✔️ | ✔️ | | |
## Connectivity
-| Setting | Description | Desktop editions | Mobile editions | Surface Hub | HoloLens | IoT Core |
-| --- | --- | :---: | :---: | :---: | :---: | :---: |
-| [AllowBluetooth](/windows/client-management/mdm/policy-configuration-service-provider#connectivity-allowbluetooth) | Allow the user to enable Bluetooth or restrict access. | ✔️ | ✔️ | ✔️ | ✔️ | ✔️ |
-| [AllowCellularData](/windows/client-management/mdm/policy-configuration-service-provider#connectivity-allowcellulardata) | Allow the cellular data channel on the device. | ✔️ | ✔️ | ✔️ | | ✔️ |
-| [AllowCellularDataRoaming](/windows/client-management/mdm/policy-configuration-service-provider#connectivity-allowcellulardataroaming) | Allow or disallow cellular data roaming on the device. | ✔️ | ✔️ | ✔️ | | ✔️ |
-| [AllowConnectedDevices](/windows/client-management/mdm/policy-configuration-service-provider#connectivity-allowconnecteddevices) | Allows IT admins the ability to disable the Connected Devices Platform component. | ✔️ | ✔️ | ✔️ | | ✔️ |
-| [AllowNFC](/windows/client-management/mdm/policy-configuration-service-provider#connectivity-allownfc) | Allow or disallow near field communication (NFC) on the device. | | ✔️ | | | ✔️ |
-| [AllowUSBConnection](/windows/client-management/mdm/policy-configuration-service-provider#connectivity-allowusbconnection) | Enable USB connection between the device and a computer to sync files with the device or to use developer tools or to deploy or debug applications. | | ✔️ | | | ✔️ |
-| [AllowVPNOverCellular](/windows/client-management/mdm/policy-configuration-service-provider#connectivity-allowvpnovercellular) | Specify what type of underlyinng connections VPN is allowed to use. |✔️ | ✔️ | ✔️ | | ✔️ |
-| [AllowVPNRoamingOverCellular](/windows/client-management/mdm/policy-configuration-service-provider#connectivity-allowvpnroamingovercellular) | Prevent the device from connecting to VPN when the device roams over cellular networks. | ✔️ | ✔️ | ✔️ | | ✔️ |
-| HideCellularConnectionMode | Hide the checkbox that lets the user change the connection mode. | ✔️ | ✔️ | ✔️ | | ✔️ |
-| HideCellularRoamingOption | Hide the dropdown menu that lets the user change the roaming preferences. | ✔️ | ✔️ | ✔️ | | ✔️ |
+| Setting | Description | Windows client | Surface Hub | HoloLens | IoT Core |
+| --- | --- | :---: | :---: | :---: | :---: |
+| [AllowBluetooth](/windows/client-management/mdm/policy-configuration-service-provider#connectivity-allowbluetooth) | Allow the user to enable Bluetooth or restrict access. | ✔️ | ✔️ | ✔️ | ✔️ |
+| [AllowCellularData](/windows/client-management/mdm/policy-configuration-service-provider#connectivity-allowcellulardata) | Allow the cellular data channel on the device. | ✔️ | ✔️ | | ✔️ |
+| [AllowCellularDataRoaming](/windows/client-management/mdm/policy-configuration-service-provider#connectivity-allowcellulardataroaming) | Allow or disallow cellular data roaming on the device. | ✔️ | ✔️ | | ✔️ |
+| [AllowConnectedDevices](/windows/client-management/mdm/policy-configuration-service-provider#connectivity-allowconnecteddevices) | Allows IT admins the ability to disable the Connected Devices Platform component. | ✔️ | ✔️ | | ✔️ |
+| [AllowNFC](/windows/client-management/mdm/policy-configuration-service-provider#connectivity-allownfc) | Allow or disallow near field communication (NFC) on the device. | | | | ✔️ |
+| [AllowUSBConnection](/windows/client-management/mdm/policy-configuration-service-provider#connectivity-allowusbconnection) | Enable USB connection between the device and a computer to sync files with the device or to use developer tools or to deploy or debug applications. | | | | ✔️ |
+| [AllowVPNOverCellular](/windows/client-management/mdm/policy-configuration-service-provider#connectivity-allowvpnovercellular) | Specify what type of underlying connections VPN is allowed to use. |✔️ | ✔️ | | ✔️ |
+| [AllowVPNRoamingOverCellular](/windows/client-management/mdm/policy-configuration-service-provider#connectivity-allowvpnroamingovercellular) | Prevent the device from connecting to VPN when the device roams over cellular networks. | ✔️ | ✔️ | | ✔️ |
+| HideCellularConnectionMode | Hide the checkbox that lets the user change the connection mode. | ✔️ | ✔️ | | ✔️ |
+| HideCellularRoamingOption | Hide the dropdown menu that lets the user change the roaming preferences. | ✔️ | ✔️ | | ✔️ |
## CredentialProviders
-| Setting | Description | Desktop editions | Mobile editions | Surface Hub | HoloLens | IoT Core |
-| --- | --- | :---: | :---: | :---: | :---: | :---: |
-[DisableAutomaticReDeploymentCredentials](/windows/client-management/mdm/policy-csp-credentialproviders) | This setting disables the visibility of the credential provider that triggers the PC refresh on a device. This policy does not actually trigger the refresh. The admin user is required to authenticate to trigger the refresh on the target device. The Windows 10 Autopilot Reset feature allows admin to reset devices to a known good managed state while preserving the management enrollment. After the automatic redeployment is triggered the devices are for ready for use by information workers or students. | ✔️ | | | | |
+| Setting | Description | Windows client | Surface Hub | HoloLens | IoT Core |
+| --- | --- | :---: | :---: | :---: | :---: |
+[DisableAutomaticReDeploymentCredentials](/windows/client-management/mdm/policy-csp-credentialproviders) | This setting disables the visibility of the credential provider that triggers the PC refresh on a device. This policy does not actually trigger the refresh. The admin user is required to authenticate to trigger the refresh on the target device. The Windows 10 Autopilot Reset feature allows admin to reset devices to a known good managed state while preserving the management enrollment. After the automatic redeployment is triggered the devices are for ready for use by information workers or students. | ✔️ | | | |
## Cryptography
-| Setting | Description | Desktop editions | Mobile editions | Surface Hub | HoloLens | IoT Core |
-| --- | --- | :---: | :---: | :---: | :---: | :---: |
-| [AllowFipsAlgorithmPolicy](/windows/client-management/mdm/policy-configuration-service-provider#cryptography-allowfipsalgorithmpolicy) | Allow or disallow the Federal Information Processing Standard (FIPS) policy. | ✔️ | ✔️ | | | |
-| [TLSCiperSuites](/windows/client-management/mdm/policy-configuration-service-provider#cryptography-tlsciphersuites) | List the Cryptographic Cipher Algorithms allowed for SSL connections. Format is a semicolon delimited list. Last write win. | ✔️ | ✔️ | | | |
+| Setting | Description | Windows client | Surface Hub | HoloLens | IoT Core |
+| --- | --- | :---: | :---: | :---: | :---: |
+| [AllowFipsAlgorithmPolicy](/windows/client-management/mdm/policy-configuration-service-provider#cryptography-allowfipsalgorithmpolicy) | Allow or disallow the Federal Information Processing Standard (FIPS) policy. | ✔️ | | | |
+| [TLSCiperSuites](/windows/client-management/mdm/policy-configuration-service-provider#cryptography-tlsciphersuites) | List the Cryptographic Cipher Algorithms allowed for SSL connections. Format is a semicolon delimited list. Last write win. | ✔️ | | | |
## Defender
-| Setting | Description | Desktop editions | Mobile editions | Surface Hub | HoloLens | IoT Core |
-| --- | --- | :---: | :---: | :---: | :---: | :---: |
-| [AllowArchiveScanning](/windows/client-management/mdm/policy-configuration-service-provider#defender-allowarchivescanning) | Allow or disallow scanning of archives. | ✔️ | | | | |
-| [AllowBehaviorMonitoring](/windows/client-management/mdm/policy-configuration-service-provider#defender-allowbehaviormonitoring) | Allow or disallow Windows Defender Behavior Monitoring functionality. | ✔️ | | | | |
-| [AllowCloudProtection](/windows/client-management/mdm/policy-configuration-service-provider#defender-allowcloudprotection) | To best protect your PC, Windows Defender will send information to Microsoft about any problems it finds. Microsoft will analyze that information, learn more about problems affecting you and other customers, and offer improved solutions. | ✔️ | | | | |
-| [AllowEmailScanning](/windows/client-management/mdm/policy-configuration-service-provider#defender-allowemailscanning) | Allow or disallow scanning of email. | ✔️ | | | | |
-| [AllowFullScanOnMappedNetworkDrives](/windows/client-management/mdm/policy-configuration-service-provider#defender-allowfullscanonmappednetworkdrives) | Allow or disallow a full scan of mapped network drives. | ✔️ | | | | |
-| [AllowFullScanRemovableDriveScanning](/windows/client-management/mdm/policy-configuration-service-provider#defender-allowfullscanremovabledrivescanning) | Allow or disallow a full scan of removable drives. | ✔️ | | | | |
-| [AllowIOAVProtection](/windows/client-management/mdm/policy-configuration-service-provider#defender-allowioavprotection) | Allow or disallow Windows Defender IOAVP Protection functionality. | ✔️ | | | | |
-| [AllowOnAccessProtection](/windows/client-management/mdm/policy-configuration-service-provider#defender-allowonaccessprotection) | Allow or disallow Windows Defender On Access Protection functionality. | ✔️ | | | | |
-| [AllowRealtimeMonitoring](/windows/client-management/mdm/policy-configuration-service-provider#defender-allowrealtimemonitoring) | Allow or disallow Windows Defender Realtime Monitoring functionality. | ✔️ | | | | |
-| [AllowScanningNetworkFiles](/windows/client-management/mdm/policy-configuration-service-provider#defender-allowscanningnetworkfiles) | Allow or disallow scanning of network files. | ✔️ | | | | |
-| [AllowScriptScanning](/windows/client-management/mdm/policy-configuration-service-provider#defender-allowscriptscanning) | Allow or disallow Windows Defender Script Scanning functionality. | ✔️ | | | | |
-| [AllowUserUIAccess](/windows/client-management/mdm/policy-configuration-service-provider#defender-allowuseruiaccess) | Allow or disallow user access to the Windows Defender UI. | ✔️ | | | | |
-| [AvgCPULoadFactor](/windows/client-management/mdm/policy-configuration-service-provider#defender-avgcpuloadfactor) | Represents the average CPU load factor for the Windows Defeder scan (in percent). | ✔️ | | | | |
-| [DaysToRetainCleanedMalware](/windows/client-management/mdm/policy-configuration-service-provider#defender-daystoretaincleanedmalware) | Specify time period (in days) that quarantine items will be stored on the system. | ✔️ | | | | |
-| [ExcludedExtensions](/windows/client-management/mdm/policy-configuration-service-provider#defender-excludedextensions) | Specify a list of file type extensions to ignore durinng a scan. Separate each file type in the list by using \|. | ✔️ | | | | |
-| [ExcludedPaths](/windows/client-management/mdm/policy-configuration-service-provider#defender-excludedpaths) | Specify a list of directory paths to ignore during a scan. Separate each path in the list by using \|. | ✔️ | | | | |
-| [ExcludedProcesses](/windows/client-management/mdm/policy-configuration-service-provider#defender-excludedprocesses) | Specify a list of files opened by processes to ignore durinng a scan. Separate each file type in the list by using \|. The process itself is not excluded from the scan, but can be excluded by using the [Defender/ExcludedPaths](/windows/client-management/mdm/policy-configuration-service-provider#defender-excludedpaths) policy to exclude its path. | ✔️ | | | | |
-| [RealTimeScanDirection](/windows/client-management/mdm/policy-configuration-service-provider#defender-realtimescandirection) | Control which sets of files should be monitored. | ✔️ | | | | |
-| [ScanParameter](/windows/client-management/mdm/policy-configuration-service-provider#defender-scanparameter) | Select whether to perform a quick scan or full scan. | ✔️ | | | | |
-| [ScheduleQuickScanTime](/windows/client-management/mdm/policy-configuration-service-provider#defender-schedulequickscantime) | Specify the time of day that Windows Defender quick scan should run. | ✔️ | | | | |
-| [ScheduleScanDay](/windows/client-management/mdm/policy-configuration-service-provider#defender-schedulescanday) | Select the day that Windows Defender scan should run. | ✔️ | | | | |
-| [ScheduleScanTime](/windows/client-management/mdm/policy-configuration-service-provider#defender-schedulescantime) | Select the time of day that the Windows Defender scan should run. | ✔️ | | | | |
-| [SignatureUpdateInterval](/windows/client-management/mdm/policy-configuration-service-provider#defender-signatureupdateinterval) | Specify the interval (in hours) that will be used to check for signatures, so instead of using the ScheduleDay and ScheduleTime the check for new signatures will be set according to the interval. | ✔️ | | | | |
-| [SubmitSamplesConsent](/windows/client-management/mdm/policy-configuration-service-provider#defender-submitsamplesconsent) | Checks for the user consent level in Windows Defender to send data. | ✔️ | | | | |
-| [ThreatSeverityDefaultAction](/windows/client-management/mdm/policy-configuration-service-provider#defender-threatseveritydefaultaction) | Specify any valid threat severity levels and the corresponding default action ID to take. | ✔️ | | | | |
+| Setting | Description | Windows client | Surface Hub | HoloLens | IoT Core |
+| --- | --- | :---: | :---: | :---: | :---: |
+| [AllowArchiveScanning](/windows/client-management/mdm/policy-configuration-service-provider#defender-allowarchivescanning) | Allow or disallow scanning of archives. | ✔️ | | | |
+| [AllowBehaviorMonitoring](/windows/client-management/mdm/policy-configuration-service-provider#defender-allowbehaviormonitoring) | Allow or disallow Windows Defender Behavior Monitoring functionality. | ✔️ | | | |
+| [AllowCloudProtection](/windows/client-management/mdm/policy-configuration-service-provider#defender-allowcloudprotection) | To best protect your PC, Windows Defender will send information to Microsoft about any problems it finds. Microsoft will analyze that information, learn more about problems affecting you and other customers, and offer improved solutions. | ✔️ | | | |
+| [AllowEmailScanning](/windows/client-management/mdm/policy-configuration-service-provider#defender-allowemailscanning) | Allow or disallow scanning of email. | ✔️ | | | |
+| [AllowFullScanOnMappedNetworkDrives](/windows/client-management/mdm/policy-configuration-service-provider#defender-allowfullscanonmappednetworkdrives) | Allow or disallow a full scan of mapped network drives. | ✔️ | | | |
+| [AllowFullScanRemovableDriveScanning](/windows/client-management/mdm/policy-configuration-service-provider#defender-allowfullscanremovabledrivescanning) | Allow or disallow a full scan of removable drives. | ✔️ | | | |
+| [AllowIntrusionPreventionSystem](/windows/client-management/mdm/policy-configuration-service-provider#defender-allowintrusionpreventionsystem) | Allow or disallow Windows Defender Intrusion Prevention functionality. | ✔️ | | | |
+| [AllowIOAVProtection](/windows/client-management/mdm/policy-configuration-service-provider#defender-allowioavprotection) | Allow or disallow Windows Defender IOAVP Protection functionality. | ✔️ | | | |
+| [AllowOnAccessProtection](/windows/client-management/mdm/policy-configuration-service-provider#defender-allowonaccessprotection) | Allow or disallow Windows Defender On Access Protection functionality. | ✔️ | | | |
+| [AllowRealtimeMonitoring](/windows/client-management/mdm/policy-configuration-service-provider#defender-allowrealtimemonitoring) | Allow or disallow Windows Defender Realtime Monitoring functionality. | ✔️ | | | |
+| [AllowScanningNetworkFiles](/windows/client-management/mdm/policy-configuration-service-provider#defender-allowscanningnetworkfiles) | Allow or disallow scanning of network files. | ✔️ | | | |
+| [AllowScriptScanning](/windows/client-management/mdm/policy-configuration-service-provider#defender-allowscriptscanning) | Allow or disallow Windows Defender Script Scanning functionality. | ✔️ | | | |
+| [AllowUserUIAccess](/windows/client-management/mdm/policy-configuration-service-provider#defender-allowuseruiaccess) | Allow or disallow user access to the Windows Defender UI. | ✔️ | | | |
+| [AvgCPULoadFactor](/windows/client-management/mdm/policy-configuration-service-provider#defender-avgcpuloadfactor) | Represents the average CPU load factor for the Windows Defender scan (in percent). | ✔️ | | | |
+| [DaysToRetainCleanedMalware](/windows/client-management/mdm/policy-configuration-service-provider#defender-daystoretaincleanedmalware) | Specify time period (in days) that quarantine items will be stored on the system. | ✔️ | | | |
+| [ExcludedExtensions](/windows/client-management/mdm/policy-configuration-service-provider#defender-excludedextensions) | Specify a list of file type extensions to ignore during a scan. Separate each file type in the list by using \|. | ✔️ | | | |
+| [ExcludedPaths](/windows/client-management/mdm/policy-configuration-service-provider#defender-excludedpaths) | Specify a list of directory paths to ignore during a scan. Separate each path in the list by using \|. | ✔️ | | | |
+| [ExcludedProcesses](/windows/client-management/mdm/policy-configuration-service-provider#defender-excludedprocesses) | Specify a list of files opened by processes to ignore during a scan. Separate each file type in the list by using \|. The process itself is not excluded from the scan, but can be excluded by using the [Defender/ExcludedPaths](/windows/client-management/mdm/policy-configuration-service-provider#defender-excludedpaths) policy to exclude its path. | ✔️ | | | |
+| [RealTimeScanDirection](/windows/client-management/mdm/policy-configuration-service-provider#defender-realtimescandirection) | Control which sets of files should be monitored. | ✔️ | | | |
+| [ScanParameter](/windows/client-management/mdm/policy-configuration-service-provider#defender-scanparameter) | Select whether to perform a quick scan or full scan. | ✔️ | | | |
+| [ScheduleQuickScanTime](/windows/client-management/mdm/policy-configuration-service-provider#defender-schedulequickscantime) | Specify the time of day that Windows Defender quick scan should run. | ✔️ | | | |
+| [ScheduleScanDay](/windows/client-management/mdm/policy-configuration-service-provider#defender-schedulescanday) | Select the day that Windows Defender scan should run. | ✔️ | | | |
+| [ScheduleScanTime](/windows/client-management/mdm/policy-configuration-service-provider#defender-schedulescantime) | Select the time of day that the Windows Defender scan should run. | ✔️ | | | |
+| [SignatureUpdateInterval](/windows/client-management/mdm/policy-configuration-service-provider#defender-signatureupdateinterval) | Specify the interval (in hours) that will be used to check for signatures, so instead of using the ScheduleDay and ScheduleTime the check for new signatures will be set according to the interval. | ✔️ | | | |
+| [SubmitSamplesConsent](/windows/client-management/mdm/policy-configuration-service-provider#defender-submitsamplesconsent) | Checks for the user consent level in Windows Defender to send data. | ✔️ | | | |
+| [ThreatSeverityDefaultAction](/windows/client-management/mdm/policy-configuration-service-provider#defender-threatseveritydefaultaction) | Specify any valid threat severity levels and the corresponding default action ID to take. | ✔️ | | | |
## DeliveryOptimization
-| Setting | Description | Desktop editions | Mobile editions | Surface Hub | HoloLens | IoT Core |
-| --- | --- | :---: | :---: | :---: | :---: | :---: |
-| [DOAbsoluteMaxCacheSize](/windows/client-management/mdm/policy-configuration-service-provider#deliveryoptimization-doabsolutemaxcachesize) | Specify the maximum size in GB of Delivery Optimization cache. | ✔️ | | | | |
-| [DOAllowVPNPeerCaching](/windows/client-management/mdm/policy-configuration-service-provider#deliveryoptimization-doallowvpnpeercaching) | Specify whether the device is allowed to participate in Peer Caching while connected via VPN to the domain network. | ✔️ | | | | |
-| [DODelayBackgroundDownloadFromHttp](/windows/client-management/mdm/policy-csp-deliveryoptimization#deliveryoptimization-dodelaybackgrounddownloadfromhttp) | Allows you to delay the use of an HTTP source in a background download that is allowed to use peer-to-peer. | ✔️ | | | | |
-| [DODelayForegroundDownloadFromHttp](/windows/client-management/mdm/policy-csp-deliveryoptimization#deliveryoptimization-dodelayforegrounddownloadfromhttp) | Allows you to delay the use of an HTTP source in a foreground (interactive) download that is allowed to use peer-to-peer. | ✔️ | | | | |
-| [DODownloadMode](/windows/client-management/mdm/policy-configuration-service-provider#deliveryoptimization-dodownloadmode) | Specify the download method that Delivery Optimization can use in downloads of Windows Updates, apps, and app updates. | ✔️ | | | | |
-| [DOGroupId](/windows/client-management/mdm/policy-configuration-service-provider#deliveryoptimization-dogroupid) | Specify an arbitrary group ID that the device belongs to. | ✔️ | | | | |
-| [DOGroupIdSource](/windows/client-management/mdm/policy-configuration-service-provider#deliveryoptimization-dogroupidsource) | Set this policy to restrict peer selection to a specific source | ✔️ | | | | |
-| [DOMaxCacheAge](/windows/client-management/mdm/policy-configuration-service-provider#deliveryoptimization-domaxcacheage) | Specify the maximum time in seconds that each file is held in the Delivery Optimization cache after downloading successfully. | ✔️ | | | | |
-| [DOMaxCacheSize](/windows/client-management/mdm/policy-configuration-service-provider#deliveryoptimization-domaxcachesize) | Specify the maximum cache size that Delivery Optimization can utilize, as a percentage of disk size (1-100). | ✔️ | | | | |
-| [DOMaxDownloadBandwidth](/windows/client-management/mdm/policy-configuration-service-provider#deliveryoptimization-domaxdownloadbandwidth) | Specify the maximum download bandwidth in kilobytes/second that the device can use across all concurrent download activities using Delivery Optimization. | ✔️ | | | | |
-| [DOMaxUploadBandwidth](/windows/client-management/mdm/policy-configuration-service-provider#deliveryoptimization-domaxuploadbandwidth) | Specify the maximum upload bandwidth in kilobytes/second that a device will use across all concurrent upload activity usinng Delivery Optimization. | ✔️ | | | | |
-| [DOMinBackgroundQos](/windows/client-management/mdm/policy-configuration-service-provider#deliveryoptimization-dominbackgroundqos) | Specify the minimum download QoS (Quality of Service or speed) i kilobytes/second for background downloads. | ✔️ | | | | |
-| [DOMinBatteryPercentageAllowedToUpload](/windows/client-management/mdm/policy-configuration-service-provider#deliveryoptimization-dominbatterypercentageallowedtoupload) | Specify any value between 1 and 100 (in percentage) to allow the device to upload data to LAN and group peers while on battery power. | ✔️ | | | | |
-| [DOMinDiskSizeAllowedToPeer](/windows/client-management/mdm/policy-configuration-service-provider#deliveryoptimization-domindisksizeallowedtopeer) | Specify the required minimum disk size (capabity in GB) for the device to use Peer Caching. | ✔️ | | | | |
-| [DOMinFileSizeToCache](/windows/client-management/mdm/policy-configuration-service-provider#deliveryoptimization-dominfilesizetocache) | Specify the minimum content file size in MB enabled to use Peer Caching. | ✔️ | | | | |
-| [DOMinRAMAllowedToPeer](/windows/client-management/mdm/policy-configuration-service-provider#deliveryoptimization-dominramallowedtopeer) | Specify the minimum RAM size in GB requried to use Peer Caching. | ✔️ | | | | |
-| [DOModifyCacheDrive](/windows/client-management/mdm/policy-configuration-service-provider#deliveryoptimization-domodifycachedrive) | Specify the drive that Delivery Optimization should use for its cache. | ✔️ | | | | |
-| [DOMonthlyUploadDataCap](/windows/client-management/mdm/policy-configuration-service-provider#deliveryoptimization-domonthlyuploaddatacap) | Specify the maximum total bytes in GB that Delivery Optimization is allowed to upload to Internet peers in each calendar month. | ✔️ | | | | |
-| [DOPercentageMaxBackDownloadBandwidth](/windows/client-management/mdm/policy-configuration-service-provider#deliveryoptimization-dopercentagemaxbackgroundbandwidth) | Specify the maximum background download bandwidth that Delivery Optimization uses across all concurrent download activities as a percentage of available download bandwidth. | ✔️ | | | | |
-| [DOPercentageMaxDownloadBandwidth](/windows/client-management/mdm/policy-configuration-service-provider#deliveryoptimization-dopercentagemaxdownloadbandwidth) | Specify the maximum download bandwidth that Delivery Optimization uses across all concurrent download activities as a percentage of available download bandwidth. | ✔️ | | | | |
-| [DOPercentageMaxForeDownloadBandwidth](/windows/client-management/mdm/policy-configuration-service-provider#deliveryoptimization-dopercentagemaxforegroundbandwidth) | Specify the maximum foreground download bandwidth that Delivery Optimization uses across all concurrent download activities as a percentage of available download bandwidth. | ✔️ | | | | |
-| [DORestrictPeerSelectionBy](/windows/client-management/mdm/policy-configuration-service-provider#deliveryoptimization-dorestrictpeerselectionby) | Set this policy to restrict peer selection by the selected option. | ✔️ | | | | |
-| [DOSetHoursToLimitBackgroundDownloadBandwidth](/windows/client-management/mdm/policy-configuration-service-provider#deliveryoptimization-dosethourstolimitbackgrounddownloadbandwidth) | Specify the maximum background download bandwidth that Delivery Optimization uses during and outside business hours across all concurrent download activities as a percentage of available download bandwidth. | ✔️ | | | | |
-| [DOSetHoursToLimitForegroundDownloadBandwidth](/windows/client-management/mdm/policy-configuration-service-provider#deliveryoptimization-dosethourstolimitforegrounddownloadbandwidth) | Specify the maximum foreground download bandwidth that Delivery Optimization uses during and outside business hours across all concurrent download activities as a percentage of available download bandwidth. | ✔️ | | | | |
+| Setting | Description | Windows client | Surface Hub | HoloLens | IoT Core |
+| --- | --- | :---: | :---: | :---: | :---: |
+| [DOAbsoluteMaxCacheSize](/windows/client-management/mdm/policy-configuration-service-provider#deliveryoptimization-doabsolutemaxcachesize) | Specify the maximum size in GB of Delivery Optimization cache. | ✔️ | | | |
+| [DOAllowVPNPeerCaching](/windows/client-management/mdm/policy-configuration-service-provider#deliveryoptimization-doallowvpnpeercaching) | Specify whether the device is allowed to participate in Peer Caching while connected via VPN to the domain network. | ✔️ | | | |
+| [DODelayBackgroundDownloadFromHttp](/windows/client-management/mdm/policy-csp-deliveryoptimization#deliveryoptimization-dodelaybackgrounddownloadfromhttp) | Allows you to delay the use of an HTTP source in a background download that is allowed to use peer-to-peer. | ✔️ | | | |
+| [DODelayForegroundDownloadFromHttp](/windows/client-management/mdm/policy-csp-deliveryoptimization#deliveryoptimization-dodelayforegrounddownloadfromhttp) | Allows you to delay the use of an HTTP source in a foreground (interactive) download that is allowed to use peer-to-peer. | ✔️ | | | |
+| [DODownloadMode](/windows/client-management/mdm/policy-configuration-service-provider#deliveryoptimization-dodownloadmode) | Specify the download method that Delivery Optimization can use in downloads of Windows Updates, apps, and app updates. | ✔️ | | | |
+| [DOGroupId](/windows/client-management/mdm/policy-configuration-service-provider#deliveryoptimization-dogroupid) | Specify an arbitrary group ID that the device belongs to. | ✔️ | | | |
+| [DOGroupIdSource](/windows/client-management/mdm/policy-configuration-service-provider#deliveryoptimization-dogroupidsource) | Set this policy to restrict peer selection to a specific source | ✔️ | | | |
+| [DOMaxCacheAge](/windows/client-management/mdm/policy-configuration-service-provider#deliveryoptimization-domaxcacheage) | Specify the maximum time in seconds that each file is held in the Delivery Optimization cache after downloading successfully. | ✔️ | | | |
+| [DOMaxCacheSize](/windows/client-management/mdm/policy-configuration-service-provider#deliveryoptimization-domaxcachesize) | Specify the maximum cache size that Delivery Optimization can utilize, as a percentage of disk size (1-100). | ✔️ | | | |
+| [DOMaxDownloadBandwidth](/windows/client-management/mdm/policy-configuration-service-provider#deliveryoptimization-domaxdownloadbandwidth) | Specify the maximum download bandwidth in kilobytes/second that the device can use across all concurrent download activities using Delivery Optimization. | ✔️ | | | |
+| [DOMaxUploadBandwidth](/windows/client-management/mdm/policy-configuration-service-provider#deliveryoptimization-domaxuploadbandwidth) | Specify the maximum upload bandwidth in kilobytes/second that a device will use across all concurrent upload activity using Delivery Optimization. | ✔️ | | | |
+| [DOMinBackgroundQos](/windows/client-management/mdm/policy-configuration-service-provider#deliveryoptimization-dominbackgroundqos) | Specify the minimum download QoS (Quality of Service or speed) i kilobytes/second for background downloads. | ✔️ | | | |
+| [DOMinBatteryPercentageAllowedToUpload](/windows/client-management/mdm/policy-configuration-service-provider#deliveryoptimization-dominbatterypercentageallowedtoupload) | Specify any value between 1 and 100 (in percentage) to allow the device to upload data to LAN and group peers while on battery power. | ✔️ | | | |
+| [DOMinDiskSizeAllowedToPeer](/windows/client-management/mdm/policy-configuration-service-provider#deliveryoptimization-domindisksizeallowedtopeer) | Specify the required minimum disk size (capacity in GB) for the device to use Peer Caching. | ✔️ | | | |
+| [DOMinFileSizeToCache](/windows/client-management/mdm/policy-configuration-service-provider#deliveryoptimization-dominfilesizetocache) | Specify the minimum content file size in MB enabled to use Peer Caching. | ✔️ | | | |
+| [DOMinRAMAllowedToPeer](/windows/client-management/mdm/policy-configuration-service-provider#deliveryoptimization-dominramallowedtopeer) | Specify the minimum RAM size in GB required to use Peer Caching. | ✔️ | | | |
+| [DOModifyCacheDrive](/windows/client-management/mdm/policy-configuration-service-provider#deliveryoptimization-domodifycachedrive) | Specify the drive that Delivery Optimization should use for its cache. | ✔️ | | | |
+| [DOMonthlyUploadDataCap](/windows/client-management/mdm/policy-configuration-service-provider#deliveryoptimization-domonthlyuploaddatacap) | Specify the maximum total bytes in GB that Delivery Optimization is allowed to upload to Internet peers in each calendar month. | ✔️ | | | |
+| [DOPercentageMaxBackDownloadBandwidth](/windows/client-management/mdm/policy-configuration-service-provider#deliveryoptimization-dopercentagemaxbackgroundbandwidth) | Specify the maximum background download bandwidth that Delivery Optimization uses across all concurrent download activities as a percentage of available download bandwidth. | ✔️ | | | |
+| [DOPercentageMaxDownloadBandwidth](/windows/client-management/mdm/policy-configuration-service-provider#deliveryoptimization-dopercentagemaxdownloadbandwidth) | Specify the maximum download bandwidth that Delivery Optimization uses across all concurrent download activities as a percentage of available download bandwidth. | ✔️ | | | |
+| [DOPercentageMaxForeDownloadBandwidth](/windows/client-management/mdm/policy-configuration-service-provider#deliveryoptimization-dopercentagemaxforegroundbandwidth) | Specify the maximum foreground download bandwidth that Delivery Optimization uses across all concurrent download activities as a percentage of available download bandwidth. | ✔️ | | | |
+| [DORestrictPeerSelectionBy](/windows/client-management/mdm/policy-configuration-service-provider#deliveryoptimization-dorestrictpeerselectionby) | Set this policy to restrict peer selection by the selected option. | ✔️ | | | |
+| [DOSetHoursToLimitBackgroundDownloadBandwidth](/windows/client-management/mdm/policy-configuration-service-provider#deliveryoptimization-dosethourstolimitbackgrounddownloadbandwidth) | Specify the maximum background download bandwidth that Delivery Optimization uses during and outside business hours across all concurrent download activities as a percentage of available download bandwidth. | ✔️ | | | |
+| [DOSetHoursToLimitForegroundDownloadBandwidth](/windows/client-management/mdm/policy-configuration-service-provider#deliveryoptimization-dosethourstolimitforegrounddownloadbandwidth) | Specify the maximum foreground download bandwidth that Delivery Optimization uses during and outside business hours across all concurrent download activities as a percentage of available download bandwidth. | ✔️ | | | |
## DeviceGuard
-| Setting | Description | Desktop editions | Mobile editions | Surface Hub | HoloLens | IoT Core |
-| --- | --- | :---: | :---: | :---: | :---: | :---: |
-[EnableVirtualizationBasedSecurity](/windows/client-management/mdm/policy-csp-deviceguard) | Turns on virtualization based security(VBS) at the next reboot. virtualization based security uses the Windows Hypervisor to provide support for security services. | ✔️ | | | | |
+| Setting | Description | Windows client | Surface Hub | HoloLens | IoT Core |
+| --- | --- | :---: | :---: | :---: | :---: |
+[EnableVirtualizationBasedSecurity](/windows/client-management/mdm/policy-csp-deviceguard) | Turns on virtualization based security(VBS) at the next reboot. virtualization based security uses the Windows Hypervisor to provide support for security services. | ✔️ | | | |
## DeviceLock
-| Setting | Description | Desktop editions | Mobile editions | Surface Hub | HoloLens | IoT Core |
-| --- | --- | :---: | :---: | :---: | :---: | :---: |
-| [AllowIdleReturnWithoutPassword](/windows/client-management/mdm/policy-configuration-service-provider#devicelock-allowidlereturnwithoutpassword) | Specify whether the user must input a PIN or password when the device resumes from an idle state. | | ✔️ | | | |
-| [AllowScreenTimeoutWhileLockedUserConfig](/windows/client-management/mdm/policy-configuration-service-provider#devicelock-allowscreentimeoutwhilelockeduserconfig) | Specify whether to show a user-configurable setting to control the screen timeout while on the lock screen. | | ✔️ | | | |
-| [AllowSimpleDevicePassword](/windows/client-management/mdm/policy-configuration-service-provider#devicelock-allowsimpledevicepassword) | Specify whether PINs or passwords such as "1111" or "1234" are allowed. For the desktop, it also controls the use of picture passwords. | ✔️ | ✔️ | | ✔️ | |
-|[AlphanumericDevicePasswordRequired](/windows/client-management/mdm/policy-configuration-service-provider#devicelock-alphanumericdevicepasswordrequired) | Select the type of PIN or password required. | ✔️ | ✔️ | | ✔️ | |
-| [DevicePasswordEnabled](/windows/client-management/mdm/policy-configuration-service-provider#devicelock-devicepasswordenabled) | Specify whether device password is enabled. | ✔️ | ✔️ | | ✔️ | |
-| [DevicePasswordExpiration](/windows/client-management/mdm/policy-configuration-service-provider#devicelock-devicepasswordexpiration) | Specify when the password expires (in days). | ✔️ | ✔️ | | ✔️ | |
-| [DevicePasswordHistory](/windows/client-management/mdm/policy-configuration-service-provider#devicelock-devicepasswordhistory) | Specify how many passwords can be stored in the history that can't be reused. | ✔️ | ✔️ | | ✔️ | |
-| [MaxDevicePasswordFailedAttempts](/windows/client-management/mdm/policy-configuration-service-provider#devicelock-maxdevicepasswordfailedattempts) | Specify the number of authentication failures allowed before the device will be wiped. | ✔️ | ✔️ | | ✔️ | |
-| [MaxInactivityTimeDeviceLock](/windows/client-management/mdm/policy-configuration-service-provider#devicelock-maxinactivitytimedevicelock) |Specify the maximum amount of time (in minutes) allowed after the device is idle that will cause the device to become PIN or password locked. | ✔️ | ✔️ | | ✔️ | |
-| [MinDevicePasswordComplexCharacters](/windows/client-management/mdm/policy-configuration-service-provider#devicelock-mindevicepasswordcomplexcharacters) | Specify the number of complex element types (uppercase and lowercase letters, numbers, and punctuation) required for a strong PIN or password. | ✔️ | ✔️ | | ✔️ | |
-| [MinDevicePasswordLength](/windows/client-management/mdm/policy-configuration-service-provider#devicelock-mindevicepasswordlength) | Specify the minimum number or characters required in the PIN or password. | ✔️ | ✔️ | | ✔️ | |
-| [ScreenTimeoutWhileLocked](/windows/client-management/mdm/policy-configuration-service-provider#devicelock-screentimeoutwhilelocked) | Specify the duration in seconds for the screen timeout while on the lock screen. | | ✔️ | | | |
+| Setting | Description | Windows client | Surface Hub | HoloLens | IoT Core |
+| --- | --- | :---: | :---: | :---: | :---: |
+| [AllowIdleReturnWithoutPassword](/windows/client-management/mdm/policy-configuration-service-provider#devicelock-allowidlereturnwithoutpassword) | Specify whether the user must input a PIN or password when the device resumes from an idle state. | | | | |
+| [AllowScreenTimeoutWhileLockedUserConfig](/windows/client-management/mdm/policy-configuration-service-provider#devicelock-allowscreentimeoutwhilelockeduserconfig) | Specify whether to show a user-configurable setting to control the screen timeout while on the lock screen. | | | | |
+| [AllowSimpleDevicePassword](/windows/client-management/mdm/policy-configuration-service-provider#devicelock-allowsimpledevicepassword) | Specify whether PINs or passwords such as "1111" or "1234" are allowed. For the desktop, it also controls the use of picture passwords. | ✔️ | | ✔️ | |
+|[AlphanumericDevicePasswordRequired](/windows/client-management/mdm/policy-configuration-service-provider#devicelock-alphanumericdevicepasswordrequired) | Select the type of PIN or password required. | ✔️ | | ✔️ | |
+| [DevicePasswordEnabled](/windows/client-management/mdm/policy-configuration-service-provider#devicelock-devicepasswordenabled) | Specify whether device password is enabled. | ✔️ | | ✔️ | |
+| [DevicePasswordExpiration](/windows/client-management/mdm/policy-configuration-service-provider#devicelock-devicepasswordexpiration) | Specify when the password expires (in days). | ✔️ | | ✔️ | |
+| [DevicePasswordHistory](/windows/client-management/mdm/policy-configuration-service-provider#devicelock-devicepasswordhistory) | Specify how many passwords can be stored in the history that can't be reused. | ✔️ | | ✔️ | |
+| [MaxDevicePasswordFailedAttempts](/windows/client-management/mdm/policy-configuration-service-provider#devicelock-maxdevicepasswordfailedattempts) | Specify the number of authentication failures allowed before the device will be wiped. | ✔️ | | ✔️ | |
+| [MaxInactivityTimeDeviceLock](/windows/client-management/mdm/policy-configuration-service-provider#devicelock-maxinactivitytimedevicelock) |Specify the maximum amount of time (in minutes) allowed after the device is idle that will cause the device to become PIN or password locked. | ✔️ | | ✔️ | |
+| [MinDevicePasswordComplexCharacters](/windows/client-management/mdm/policy-configuration-service-provider#devicelock-mindevicepasswordcomplexcharacters) | Specify the number of complex element types (uppercase and lowercase letters, numbers, and punctuation) required for a strong PIN or password. | ✔️ | | ✔️ | |
+| [MinDevicePasswordLength](/windows/client-management/mdm/policy-configuration-service-provider#devicelock-mindevicepasswordlength) | Specify the minimum number or characters required in the PIN or password. | ✔️ | | ✔️ | |
+| [ScreenTimeoutWhileLocked](/windows/client-management/mdm/policy-configuration-service-provider#devicelock-screentimeoutwhilelocked) | Specify the duration in seconds for the screen timeout while on the lock screen. | | | | |
## DeviceManagement
-| Setting | Description | Desktop editions | Mobile editions | Surface Hub | HoloLens | IoT Core |
-| --- | --- | :---: | :---: | :---: | :---: | :---: |
-| DisableMDMEnrollment | Use this setting to prevent the device from enrolling in MDM. | ✔️ | | | | |
+| Setting | Description | Windows client | Surface Hub | HoloLens | IoT Core |
+| --- | --- | :---: | :---: | :---: | :---: |
+| DisableMDMEnrollment | Use this setting to prevent the device from enrolling in MDM. | ✔️ | | | |
## Experience
-| Setting | Description | Desktop editions | Mobile editions | Surface Hub | HoloLens | IoT Core |
-| --- | --- | :---: | :---: | :---: | :---: | :---: |
-| [AllowCopyPaste](/windows/client-management/mdm/policy-configuration-service-provider#experience-allowcopypaste) | Specify whether copy and paste is allowed. | | ✔️ | | | |
-| [AllowCortana](/windows/client-management/mdm/policy-configuration-service-provider#experience-allowcortana) | Specify whether Cortana is allowed on the device. | ✔️ | ✔️ | | ✔️ | |
-| [AllowDeviceDiscovery](/windows/client-management/mdm/policy-configuration-service-provider#experience-allowdevicediscovery) | Allow users to turn device discovery on or off in the UI. | ✔️ | ✔️ | | | |
-| [AllowFindMyDevice](/windows/client-management/mdm/policy-configuration-service-provider#experience-allowfindmydevice) | Turn on **Find my device** feature. | ✔️ | ✔️ | | | |
-| [AllowManualMDMUnenrollment](/windows/client-management/mdm/policy-configuration-service-provider#experience-allowmanualmdmunenrollment) | Specify whether the user is allowed to delete the workplace account. | ✔️ | ✔️ | | ✔️ | |
-| [AllowScreenCapture](/windows/client-management/mdm/policy-configuration-service-provider#experience-allowscreencapture) | Specify whether screen capture is allowed. | | ✔️ | | | |
-| [AllowSIMErrorDialogPromptWhenNoSIM](/windows/client-management/mdm/policy-configuration-service-provider#experience-allowsimerrordialogpromptwhennosim) | Specify whether to display a dialog prompt when no SIM card is detected. | | ✔️ | | | |
-| [AllowSyncMySettings](/windows/client-management/mdm/policy-configuration-service-provider#experience-allowsyncmysettings) | Allow or disallow all Windows sync settings on the device. | ✔️ | ✔️ | | | |
-| [AllowTailoredExperiencesWithDiagnosticData](/windows/client-management/mdm/policy-configuration-service-provider#experience-allowtailoredexperienceswithdiagnosticdata) | Prevent Windows from using diagnostic data to provide customized experiences to the user. | ✔️ | | | | |
-| [AllowTaskSwitcher](/windows/client-management/mdm/policy-configuration-service-provider#experience-allowtaskswitcher) | Allow or disallow task switching on the device. | | ✔️ | | | |
-| [AllowThirdPartySuggestionsInWindowsSpotlight](/windows/client-management/mdm/policy-configuration-service-provider#experience-allowthirdpartysuggestionsinwindowsspotlight) | Specify whether to allow app and content suggestions from third-party software publishers in Windows Spotlight. | ✔️ | | | | |
-| [AllowVoiceRecording](/windows/client-management/mdm/policy-configuration-service-provider#experience-allowvoicerecording) | Specify whether voice recording is allowed for apps. | | ✔️ | | | |
-| [AllowWindowsConsumerFeatures](/windows/client-management/mdm/policy-csp-experience#experience-allowwindowsconsumerfeatures) | Turn on experiences that are typically for consumers only, such as Start suggetions, membership notifications, post-OOBE app install, and redirect tiles. | ✔️ | | | | |
-| [AllowWindowsSpotlight](/windows/client-management/mdm/policy-configuration-service-provider#experience-allowwindowsspotlight) |Specify whether to turn off all Windows Spotlight features at once. | ✔️ | | | | |
-| [AllowWindowsSpotlightOnActionCenter](/windows/client-management/mdm/policy-configuration-service-provider#experience-allowwindowsspotlightonactioncenter) | Prevent Windows Spotlight notifications from being displayed in the Action Center. | ✔️ | | | | |
-| [AllowWindowsSpotlightWindowsWelcomeExperience](/windows/client-management/mdm/policy-configuration-service-provider#experience-allowwindowsspotlightwindowswelcomeexperience) | Turn off the Windows Spotlight Windows welcome experience feature. | ✔️ | | | | |
-| [AllowWindowsTips](/windows/client-management/mdm/policy-configuration-service-provider#experience-allowwindowstips) | Enable or disable Windows Tips. | ✔️ | | | | |
-| [ConfigureWindowsSpotlightOnLockScreen](/windows/client-management/mdm/policy-configuration-service-provider#experience-configurewindowsspotlightonlockscreen) | Specify whether Spotlight should be used on the user's lock screen. | ✔️ | | | | |
+| Setting | Description | Windows client | Surface Hub | HoloLens | IoT Core |
+| --- | --- | :---: | :---: | :---: | :---: |
+| [AllowCopyPaste](/windows/client-management/mdm/policy-configuration-service-provider#experience-allowcopypaste) | Specify whether copy and paste is allowed. | | | | |
+| [AllowCortana](/windows/client-management/mdm/policy-configuration-service-provider#experience-allowcortana) | Specify whether Cortana is allowed on the device. | ✔️ | | ✔️ | |
+| [AllowDeviceDiscovery](/windows/client-management/mdm/policy-configuration-service-provider#experience-allowdevicediscovery) | Allow users to turn device discovery on or off in the UI. | ✔️ | | | |
+| [AllowFindMyDevice](/windows/client-management/mdm/policy-configuration-service-provider#experience-allowfindmydevice) | Turn on **Find my device** feature. | ✔️ | | | |
+| [AllowManualMDMUnenrollment](/windows/client-management/mdm/policy-configuration-service-provider#experience-allowmanualmdmunenrollment) | Specify whether the user is allowed to delete the workplace account. | ✔️ | | ✔️ | |
+| [AllowScreenCapture](/windows/client-management/mdm/policy-configuration-service-provider#experience-allowscreencapture) | Specify whether screen capture is allowed. | | | | |
+| [AllowSIMErrorDialogPromptWhenNoSIM](/windows/client-management/mdm/policy-configuration-service-provider#experience-allowsimerrordialogpromptwhennosim) | Specify whether to display a dialog prompt when no SIM card is detected. | | | | |
+| [AllowSyncMySettings](/windows/client-management/mdm/policy-configuration-service-provider#experience-allowsyncmysettings) | Allow or disallow all Windows sync settings on the device. | ✔️ | | | |
+| [AllowTailoredExperiencesWithDiagnosticData](/windows/client-management/mdm/policy-configuration-service-provider#experience-allowtailoredexperienceswithdiagnosticdata) | Prevent Windows from using diagnostic data to provide customized experiences to the user. | ✔️ | | | |
+| [AllowTaskSwitcher](/windows/client-management/mdm/policy-configuration-service-provider#experience-allowtaskswitcher) | Allow or disallow task switching on the device. | | | | |
+| [AllowThirdPartySuggestionsInWindowsSpotlight](/windows/client-management/mdm/policy-configuration-service-provider#experience-allowthirdpartysuggestionsinwindowsspotlight) | Specify whether to allow app and content suggestions from third-party software publishers in Windows Spotlight. | ✔️ | | | |
+| [AllowVoiceRecording](/windows/client-management/mdm/policy-configuration-service-provider#experience-allowvoicerecording) | Specify whether voice recording is allowed for apps. | | | | |
+| [AllowWindowsConsumerFeatures](/windows/client-management/mdm/policy-csp-experience#experience-allowwindowsconsumerfeatures) | Turn on experiences that are typically for consumers only, such as Start suggestions, membership notifications, post-OOBE app install, and redirect tiles. | ✔️ | | | |
+| [AllowWindowsSpotlight](/windows/client-management/mdm/policy-configuration-service-provider#experience-allowwindowsspotlight) |Specify whether to turn off all Windows Spotlight features at once. | ✔️ | | | |
+| [AllowWindowsSpotlightOnActionCenter](/windows/client-management/mdm/policy-configuration-service-provider#experience-allowwindowsspotlightonactioncenter) | Prevent Windows Spotlight notifications from being displayed in the Action Center. | ✔️ | | | |
+| [AllowWindowsSpotlightWindowsWelcomeExperience](/windows/client-management/mdm/policy-configuration-service-provider#experience-allowwindowsspotlightwindowswelcomeexperience) | Turn off the Windows Spotlight Windows welcome experience feature. | ✔️ | | | |
+| [AllowWindowsTips](/windows/client-management/mdm/policy-configuration-service-provider#experience-allowwindowstips) | Enable or disable Windows Tips. | ✔️ | | | |
+| [ConfigureWindowsSpotlightOnLockScreen](/windows/client-management/mdm/policy-configuration-service-provider#experience-configurewindowsspotlightonlockscreen) | Specify whether Spotlight should be used on the user's lock screen. | ✔️ | | | |
## ExploitGuard
-| Setting | Description | Desktop editions | Mobile editions | Surface Hub | HoloLens | IoT Core |
-| --- | --- | :---: | :---: | :---: | :---: | :---: |
-| [ExploitProtectionSettings](/windows/client-management/mdm/policy-csp-exploitguard) | See the [explanation of ExploitProtectionSettings](/windows/client-management/mdm/policy-csp-exploitguard) in the Policy CSP for instructions. In the **ExploitProtectionSettings** field, you can enter a path (local, UNC, or URI) to the mitigation options config, or you can enter the XML for the config. | ✔️ | ✔️ | | | |
+| Setting | Description | Windows client | Surface Hub | HoloLens | IoT Core |
+| --- | --- | :---: | :---: | :---: | :---: |
+| [ExploitProtectionSettings](/windows/client-management/mdm/policy-csp-exploitguard) | See the [explanation of ExploitProtectionSettings](/windows/client-management/mdm/policy-csp-exploitguard) in the Policy CSP for instructions. In the **ExploitProtectionSettings** field, you can enter a path (local, UNC, or URI) to the mitigation options config, or you can enter the XML for the config. | ✔️ | | | |
## Games
-| Setting | Description | Desktop editions | Mobile editions | Surface Hub | HoloLens | IoT Core |
-| --- | --- | :---: | :---: | :---: | :---: | :---: |
-| [AllowAdvancedGamingServices](/windows/client-management/mdm/policy-configuration-service-provider#games-allowadvancedgamingservices) | Currently not supported. | ✔️ | | | | |
+| Setting | Description | Windows client | Surface Hub | HoloLens | IoT Core |
+| --- | --- | :---: | :---: | :---: | :---: |
+| [AllowAdvancedGamingServices](/windows/client-management/mdm/policy-configuration-service-provider#games-allowadvancedgamingservices) | Currently not supported. | ✔️ | | | |
## KioskBrowser
These settings apply to the **Kiosk Browser** app available in Microsoft Store. For more information, see [Guidelines for web browsers](../guidelines-for-assigned-access-app.md#guidelines-for-web-browsers).
-| Setting | Description | Desktop editions | Mobile editions | Surface Hub | HoloLens | IoT Core |
-| --- | --- | :---: | :---: | :---: | :---: | :---: |
-[BlockedUrlExceptions](/windows/client-management/mdm/policy-csp-kioskbrowser#kioskbrowser-blockedurlexceptions) | List of exceptions to the blocked website URLs (with wildcard support). This is used to configure URLs kiosk browsers are allowed to navigate to, which are a subset of the blocked URLs. | ✔️ | | | | |
-[BlockedUrls](/windows/client-management/mdm/policy-csp-kioskbrowser#kioskbrowser-blockedurls) | List of blocked website URLs (with wildcard support). This is used to configure blocked URLs kiosk browsers cannot navigate to. | ✔️ | | | | |
-[DefaultURL](/windows/client-management/mdm/policy-csp-kioskbrowser#kioskbrowser-defaulturl) | Configures the default URL kiosk browsers to navigate on launch and restart. | ✔️ | | | | |
-[EnableEndSessionButton](/windows/client-management/mdm/policy-csp-kioskbrowser#kioskbrowser-enableendsessionbutton) | Enable/disable kiosk browser's end session button. | ✔️ | | | | |
-[EnableHomeButton](/windows/client-management/mdm/policy-csp-kioskbrowser#kioskbrowser-enablehomebutton) | Enable/disable kiosk browser's home button. | ✔️ | | | | |
-[EnableNavigationButtons](/windows/client-management/mdm/policy-csp-kioskbrowser#kioskbrowser-enablenavigationbuttons) | Enable/disable kiosk browser's navigation buttons (forward/back). | ✔️ | | | | |
-[RestartOnIdleTime](/windows/client-management/mdm/policy-csp-kioskbrowser#kioskbrowser-restartonidletime) | Amount of time in minutes the session is idle until the kiosk browser restarts in a fresh state. The value is an int 1-1440 that specifies the amount of minutes the session is idle until the kiosk browser restarts in a fresh state. The default value is empty which means there is no idle timeout within the kiosk browser. | ✔️ | | | | |
+| Setting | Description | Windows client | Surface Hub | HoloLens | IoT Core |
+| --- | --- | :---: | :---: | :---: | :---: |
+|[BlockedUrlExceptions](/windows/client-management/mdm/policy-csp-kioskbrowser#kioskbrowser-blockedurlexceptions) | List of exceptions to the blocked website URLs (with wildcard support). This is used to configure URLs kiosk browsers are allowed to navigate to, which are a subset of the blocked URLs. | ✔️ | | | |
+|[BlockedUrls](/windows/client-management/mdm/policy-csp-kioskbrowser#kioskbrowser-blockedurls) | List of blocked website URLs (with wildcard support). This is used to configure blocked URLs kiosk browsers cannot navigate to. | ✔️ | | | |
+|[DefaultURL](/windows/client-management/mdm/policy-csp-kioskbrowser#kioskbrowser-defaulturl) | Configures the default URL kiosk browsers to navigate on launch and restart. | ✔️ | | | |
+|[EnableEndSessionButton](/windows/client-management/mdm/policy-csp-kioskbrowser#kioskbrowser-enableendsessionbutton) | Enable/disable kiosk browser's end session button. | ✔️ | | | |
+|[EnableHomeButton](/windows/client-management/mdm/policy-csp-kioskbrowser#kioskbrowser-enablehomebutton) | Enable/disable kiosk browser's home button. | ✔️ | | | |
+|[EnableNavigationButtons](/windows/client-management/mdm/policy-csp-kioskbrowser#kioskbrowser-enablenavigationbuttons) | Enable/disable kiosk browser's navigation buttons (forward/back). | ✔️ | | | |
+|[RestartOnIdleTime](/windows/client-management/mdm/policy-csp-kioskbrowser#kioskbrowser-restartonidletime) | Amount of time in minutes the session is idle until the kiosk browser restarts in a fresh state. The value is an int 1-1440 that specifies the amount of minutes the session is idle until the kiosk browser restarts in a fresh state. The default value is empty which means there is no idle timeout within the kiosk browser. | ✔️ | | | |
To configure multiple URLs for **Blocked URL Exceptions** or **Blocked URLs** in Windows Configuration Designer:
@@ -339,252 +340,253 @@ To configure multiple URLs for **Blocked URL Exceptions** or **Blocked URLs** in
## LocalPoliciesSecurityOptions
-| Setting | Description | Desktop editions | Mobile editions | Surface Hub | HoloLens | IoT Core |
-| --- | --- | :---: | :---: | :---: | :---: | :---: |
-| [InteractiveLogon_DoNotDisplayLastSignedIn](/windows/client-management/mdm/policy-csp-localpoliciessecurityoptions#localpoliciessecurityoptions-interactivelogon-donotdisplaylastsignedin) | Specify whether the Windows sign-in screen will show the username of the last person who signed in. | ✔️ | | | | |
-| [Shutdown_AllowSystemtobeShutDownWithoutHavingToLogOn](/windows/client-management/mdm/policy-csp-localpoliciessecurityoptions#localpoliciessecurityoptions-shutdown-allowsystemtobeshutdownwithouthavingtologon) | Specify whether a computer can be shut down without signing in. | ✔️ | | | | |
-| [UserAccountControl_BehaviorOfTheElevationPromptForStandardUsers](/windows/client-management/mdm/policy-csp-localpoliciessecurityoptions#localpoliciessecurityoptions-useraccountcontrol-behavioroftheelevationpromptforstandardusers) | Configure how an elevation prompt should behave for standard users. | ✔️ | | | | |
+| Setting | Description | Windows client | Surface Hub | HoloLens | IoT Core |
+| --- | --- | :---: | :---: | :---: | :---: |
+| [InteractiveLogon_DoNotDisplayLastSignedIn](/windows/client-management/mdm/policy-csp-localpoliciessecurityoptions#localpoliciessecurityoptions-interactivelogon-donotdisplaylastsignedin) | Specify whether the Windows sign-in screen will show the username of the last person who signed in. | ✔️ | | | |
+| [Shutdown_AllowSystemtobeShutDownWithoutHavingToLogOn](/windows/client-management/mdm/policy-csp-localpoliciessecurityoptions#localpoliciessecurityoptions-shutdown-allowsystemtobeshutdownwithouthavingtologon) | Specify whether a computer can be shut down without signing in. | ✔️ | | | |
+| [UserAccountControl_BehaviorOfTheElevationPromptForStandardUsers](/windows/client-management/mdm/policy-csp-localpoliciessecurityoptions#localpoliciessecurityoptions-useraccountcontrol-behavioroftheelevationpromptforstandardusers) | Configure how an elevation prompt should behave for standard users. | ✔️ | | | |
## Location
-| Setting | Description | Desktop editions | Mobile editions | Surface Hub | HoloLens | IoT Core |
-| --- | --- | :---: | :---: | :---: | :---: | :---: |
-| [EnableLocation](/windows/client-management/mdm/policy-configuration-service-provider#location-enablelocation) | Do not use. | | | | | |
+| Setting | Description | Windows client | Surface Hub | HoloLens | IoT Core |
+| --- | --- | :---: | :---: | :---: | :---: |
+| [EnableLocation](/windows/client-management/mdm/policy-configuration-service-provider#location-enablelocation) | Do not use. | | | | |
## Power
-| Setting | Description | Desktop editions | Mobile editions | Surface Hub | HoloLens | IoT Core |
-| --- | --- | :---: | :---: | :---: | :---: | :---: |
-| [AllowStandbyStatesWhenSleepingOnBattery](/windows/client-management/mdm/policy-csp-power#allowstandbystateswhensleepingonbattery) | Specify whether Windows can use standby states when putting the computer in a sleep state while on battery. | ✔️ | | | | |
-| [AllowStandbyWhenSleepingPluggedIn](/windows/client-management/mdm/policy-csp-power#allowstandbystateswhensleepingpluggedin) | Specify whether Windows can use standby states when putting the computer in a sleep state while plugged in. | ✔️ | | | | |
-| [DisplayOffTimeoutOnBattery](/windows/client-management/mdm/policy-csp-power#displayofftimeoutonbattery) | Specify the period of inactivity before Windows turns off the display while on battery. | ✔️ | | | | |
-| [DisplayOffTimeoutPluggedIn](/windows/client-management/mdm/policy-csp-power#displayofftimeoutpluggedin) | Specify the period of inactivity before Windows turns off the display while plugged in. | ✔️ | | | | |
-| [EnergySaverBatteryThresholdOnBattery](/windows/client-management/mdm/policy-csp-power#energysaverbatterythresholdonbattery) | Specify the battery charge level at which Energy Saver is turned on while on battery. | ✔️ | | | | |
-| [EnergySaverBatteryThresholdPluggedIn](/windows/client-management/mdm/policy-csp-power#EnergySaverBatteryThresholdPluggedIn) | Specify the battery charge level at which Energy Saver is turned on while plugged in. | ✔️ | | | | |
-| [HibernateTimeoutOnBattery](/windows/client-management/mdm/policy-csp-power#hibernatetimeoutonbattery) | Specify the period of inactivity before Windows transitions the system to hibernate while on battery. | ✔️ | | | | |
-| [HibernateTimeoutPluggedIn](/windows/client-management/mdm/policy-csp-power#hibernatetimeoutpluggedin) | Specify the period of inactivity before Windows transitions the system to hibernate while plugged in. | ✔️ | | | | |
-| [RequirePasswordWhenComputerWakesOnBattery](/windows/client-management/mdm/policy-csp-power#requirepasswordwhencomputerwakesonbattery) | Specify whether the user is prompted for a password when the system resumes from sleep while on battery. | ✔️ | | | | |
-| [RequirePasswordWhenComputerWakesPluggedIn](/windows/client-management/mdm/policy-csp-power#requirepasswordwhencomputerwakespluggedin) | Specify whether the user is prompted for a password when the system resumes from sleep while plugged in. | ✔️ | | | | |
-| [SelectLidCloseActionBattery](/windows/client-management/mdm/policy-csp-power#selectlidcloseactionpluggedin) | Select the action to be taken when a user closes the lid on a mobile device while on battery. | ✔️ | | | | |
-| [SelectLidCloseActionPluggedIn](/windows/client-management/mdm/policy-csp-power#selectlidcloseactionpluggedin) | Select the action to be taken when a user closes the lid on a mobile device while on plugged in. | ✔️ | | | | |
-| [SelectPowerButtonActionOnBattery](/windows/client-management/mdm/policy-csp-power#selectpowerbuttonactiononbattery) | Select the action to be taken when the user presses the power button while on battery. | ✔️ | | | | |
-| [SelectPowerButtonActionPluggedIn](/windows/client-management/mdm/policy-csp-power#selectpowerbuttonactionpluggedin) | Select the action to be taken when the user presses the power button while on plugged in. | ✔️ | | | | |
-| [SelectSleepButtonActionOnBattery](/windows/client-management/mdm/policy-csp-power#selectsleepbuttonactiononbattery) | Select the action to be taken when the user presses the sleep button while on battery. | ✔️ | | | | |
-| [SelectSleepButtonActionPluggedIn](/windows/client-management/mdm/policy-csp-power#selectsleepbuttonactionpluggedin) | Select the action to be taken when the user presses the sleep button while plugged in. | ✔️ | | | | |
-| [StandbyTimeoutOnBattery](/windows/client-management/mdm/policy-csp-power#StandbyTimeoutOnBattery) | Specify the period of inactivity before Windows transitions the system to sleep while on battery. | ✔️ | | | | |
-| [StandbyTimeoutPluggedIn](/windows/client-management/mdm/policy-csp-power#standbytimeoutpluggedin) | Specify the period of inactivity before Windows transitions the system to sleep while plugged in. | ✔️ | | | | |
-| [TurnOffHybridSleepOnBattery](/windows/client-management/mdm/policy-csp-power#turnoffhybridsleeponbattery) | Turn off hybrid sleep while on battery. | ✔️ | | | | |
-| [TurnOffHybridSleepPluggedIn](/windows/client-management/mdm/policy-csp-power#turnoffhybridsleeppluggedin) | Turn off hybrid sleep while plugged in. | ✔️ | | | | |
-| [UnattendedSleepTimeoutOnBattery](/windows/client-management/mdm/policy-csp-power#unattendedsleeptimeoutonbattery) | Specify the period of inactivity before Windows transitions the system to sleep automatically when a user is not present while on battery. | ✔️ | | | | |
-| [UnattendedSleepTimeoutPluggedIn](/windows/client-management/mdm/policy-csp-power#unattendedsleeptimeoutpluggedin) | Specify the period of inactivity before Windows transitions the system to sleep automatically when a user is not present while plugged in. | ✔️ | | | | |
+| Setting | Description | Windows client | Surface Hub | HoloLens | IoT Core |
+| --- | --- | :---: | :---: | :---: | :---: |
+| [AllowStandbyStatesWhenSleepingOnBattery](/windows/client-management/mdm/policy-csp-power#allowstandbystateswhensleepingonbattery) | Specify whether Windows can use standby states when putting the computer in a sleep state while on battery. | ✔️ | | | |
+| [AllowStandbyWhenSleepingPluggedIn](/windows/client-management/mdm/policy-csp-power#allowstandbystateswhensleepingpluggedin) | Specify whether Windows can use standby states when putting the computer in a sleep state while plugged in. | ✔️ | | | |
+| [DisplayOffTimeoutOnBattery](/windows/client-management/mdm/policy-csp-power#displayofftimeoutonbattery) | Specify the period of inactivity before Windows turns off the display while on battery. | ✔️ | | | |
+| [DisplayOffTimeoutPluggedIn](/windows/client-management/mdm/policy-csp-power#displayofftimeoutpluggedin) | Specify the period of inactivity before Windows turns off the display while plugged in. | ✔️ | | | |
+| [EnergySaverBatteryThresholdOnBattery](/windows/client-management/mdm/policy-csp-power#energysaverbatterythresholdonbattery) | Specify the battery charge level at which Energy Saver is turned on while on battery. | ✔️ | | | |
+| [EnergySaverBatteryThresholdPluggedIn](/windows/client-management/mdm/policy-csp-power#EnergySaverBatteryThresholdPluggedIn) | Specify the battery charge level at which Energy Saver is turned on while plugged in. | ✔️ | | | |
+| [HibernateTimeoutOnBattery](/windows/client-management/mdm/policy-csp-power#hibernatetimeoutonbattery) | Specify the period of inactivity before Windows transitions the system to hibernate while on battery. | ✔️ | | | |
+| [HibernateTimeoutPluggedIn](/windows/client-management/mdm/policy-csp-power#hibernatetimeoutpluggedin) | Specify the period of inactivity before Windows transitions the system to hibernate while plugged in. | ✔️ | | | |
+| [RequirePasswordWhenComputerWakesOnBattery](/windows/client-management/mdm/policy-csp-power#requirepasswordwhencomputerwakesonbattery) | Specify whether the user is prompted for a password when the system resumes from sleep while on battery. | ✔️ | | | |
+| [RequirePasswordWhenComputerWakesPluggedIn](/windows/client-management/mdm/policy-csp-power#requirepasswordwhencomputerwakespluggedin) | Specify whether the user is prompted for a password when the system resumes from sleep while plugged in. | ✔️ | | | |
+| [SelectLidCloseActionBattery](/windows/client-management/mdm/policy-csp-power#selectlidcloseactionpluggedin) | Select the action to be taken when a user closes the lid on a mobile device while on battery. | ✔️ | | | |
+| [SelectLidCloseActionPluggedIn](/windows/client-management/mdm/policy-csp-power#selectlidcloseactionpluggedin) | Select the action to be taken when a user closes the lid on a mobile device while on plugged in. | ✔️ | | | |
+| [SelectPowerButtonActionOnBattery](/windows/client-management/mdm/policy-csp-power#selectpowerbuttonactiononbattery) | Select the action to be taken when the user presses the power button while on battery. | ✔️ | | | |
+| [SelectPowerButtonActionPluggedIn](/windows/client-management/mdm/policy-csp-power#selectpowerbuttonactionpluggedin) | Select the action to be taken when the user presses the power button while on plugged in. | ✔️ | | | |
+| [SelectSleepButtonActionOnBattery](/windows/client-management/mdm/policy-csp-power#selectsleepbuttonactiononbattery) | Select the action to be taken when the user presses the sleep button while on battery. | ✔️ | | | |
+| [SelectSleepButtonActionPluggedIn](/windows/client-management/mdm/policy-csp-power#selectsleepbuttonactionpluggedin) | Select the action to be taken when the user presses the sleep button while plugged in. | ✔️ | | | |
+| [StandbyTimeoutOnBattery](/windows/client-management/mdm/policy-csp-power#StandbyTimeoutOnBattery) | Specify the period of inactivity before Windows transitions the system to sleep while on battery. | ✔️ | | | |
+| [StandbyTimeoutPluggedIn](/windows/client-management/mdm/policy-csp-power#standbytimeoutpluggedin) | Specify the period of inactivity before Windows transitions the system to sleep while plugged in. | ✔️ | | | |
+| [TurnOffHybridSleepOnBattery](/windows/client-management/mdm/policy-csp-power#turnoffhybridsleeponbattery) | Turn off hybrid sleep while on battery. | ✔️ | | | |
+| [TurnOffHybridSleepPluggedIn](/windows/client-management/mdm/policy-csp-power#turnoffhybridsleeppluggedin) | Turn off hybrid sleep while plugged in. | ✔️ | | | |
+| [UnattendedSleepTimeoutOnBattery](/windows/client-management/mdm/policy-csp-power#unattendedsleeptimeoutonbattery) | Specify the period of inactivity before Windows transitions the system to sleep automatically when a user is not present while on battery. | ✔️ | | | |
+| [UnattendedSleepTimeoutPluggedIn](/windows/client-management/mdm/policy-csp-power#unattendedsleeptimeoutpluggedin) | Specify the period of inactivity before Windows transitions the system to sleep automatically when a user is not present while plugged in. | ✔️ | | | |
## Privacy
-| Setting | Description | Desktop editions | Mobile editions | Surface Hub | HoloLens | IoT Core |
-| --- | --- | :---: | :---: | :---: | :---: | :---: |
-| [AllowAutoAcceptPairingAndPrivacyConsentPrompts](/windows/client-management/mdm/policy-configuration-service-provider#privacy-allowautoacceptpairingandprivacyconsentprompts) | Allow or disallow the automatic acceptance of the pairing and privacy user consent dialog boxes when launching apps. | | ✔️ | | | |
-| [AllowInputPersonalization](/windows/client-management/mdm/policy-configuration-service-provider#privacy-allowinputpersonalization) | Allow the use of cloud-based speech services for Cortana, dictation, or Store apps. | ✔️ | ✔️ | | ✔️ | |
+| Setting | Description | Windows client | Surface Hub | HoloLens | IoT Core |
+| --- | --- | :---: | :---: | :---: | :---: |
+| [AllowAutoAcceptPairingAndPrivacyConsentPrompts](/windows/client-management/mdm/policy-configuration-service-provider#privacy-allowautoacceptpairingandprivacyconsentprompts) | Allow or disallow the automatic acceptance of the pairing and privacy user consent dialog boxes when launching apps. | | | | |
+| [AllowInputPersonalization](/windows/client-management/mdm/policy-configuration-service-provider#privacy-allowinputpersonalization) | Allow the use of cloud-based speech services for Cortana, dictation, or Store apps. | ✔️ | | ✔️ | |
## Search
-| Setting | Description | Desktop editions | Mobile editions | Surface Hub | HoloLens | IoT Core |
-| --- | --- | :---: | :---: | :---: | :---: | :---: |
-[AllowCloudSearch](/windows/client-management/mdm/policy-csp-search#search-allowcloudsearch) | Allow search and Cortana to search cloud sources like OneDrive and SharePoint. T | ✔️ | ✔️ | | | |
-[AllowCortanaInAAD](/windows/client-management/mdm/policy-csp-search#search-allowcortanainaad) | This specifies whether the Cortana consent page can appear in the Azure Active Directory (AAD) device out-of-box-experience (OOBE) flow. | ✔️ | | | | |
-| [AllowIndexingEncryptedStoresOrItems](/windows/client-management/mdm/policy-configuration-service-provider#search-allowindexingencryptedstoresoritems) | Allow or disallow the indexing of items. | ✔️ | ✔️ | | | |
-| [AllowSearchToUseLocation](/windows/client-management/mdm/policy-configuration-service-provider#search-allowsearchtouselocation) | Specify whether search can use location information. | ✔️ | ✔️ | | ✔️ | |
-| [AllowUsingDiacritics](/windows/client-management/mdm/policy-configuration-service-provider#search-allowusingdiacritics) | Allow the use of diacritics. | ✔️ | ✔️ | | | |
-| [AllowWindowsIndexer](/windows/client-management/mdm/policy-csp-search#search-allowwindowsindexer) | The indexer provides fast file, email, and web history search for apps and system components including Cortana, Outlook, file explorer, and Edge. To do this, it requires access to the file system and app data stores such as Outlook OST files.- **Off** setting disables Windows indexer- **EnterpriseSecure** setting stops the indexer from indexing encrypted files or stores, and is recommended for enterprises using Windows Information Protection (WIP)- **Enterprise** setting reduces potential network loads for enterprises- **Standard** setting is appropriate for consuemrs | ✔️ | ✔️ | | | |
-| [AlwaysUseAutoLangDetection](/windows/client-management/mdm/policy-configuration-service-provider#search-alwaysuseautolangdetection) | Specify whether to always use automatic language detection when indexing content and properties. | ✔️ | ✔️ | | | |
-| [DoNotUseWebResults](/windows/client-management/mdm/policy-configuration-service-provider#search-donotusewebresults) | Specify whether to allow Search to perform queries on the web. | ✔️ | ✔️ | | | |
-| [DisableBackoff](/windows/client-management/mdm/policy-configuration-service-provider#search-disablebackoff) | If enabled, the search indexer backoff feature will be disabled. | ✔️ | ✔️ | | | |
-| [DisableRemovableDriveIndexing](/windows/client-management/mdm/policy-configuration-service-provider#search-disableremovabledriveindexing) | Configure whether locations on removable drives can be added to libraries. | ✔️ | ✔️ | | | |
-| [PreventIndexingLowDiskSpaceMB](/windows/client-management/mdm/policy-configuration-service-provider#search-preventindexinglowdiskspacemb) | Prevent indexing from continuing after less than the specified amount of hard drive space is left on the same drive as the index location. | ✔️ | ✔️ | | | |
-| [PreventRemoteQueries](/windows/client-management/mdm/policy-configuration-service-provider#search-preventremotequeries) | If enabled, clients will be unable to query this device's index remotely. | ✔️ | ✔️ | | | |
-| [SafeSearchPermissions](/windows/client-management/mdm/policy-configuration-service-provider#search-safesearchpermissions) | Specify the level of safe search (filtering adult content) required. | | ✔️ | | | |
+| Setting | Description | Windows client | Surface Hub | HoloLens | IoT Core |
+| --- | --- | :---: | :---: | :---: | :---: |
+[AllowCloudSearch](/windows/client-management/mdm/policy-csp-search#search-allowcloudsearch) | Allow search and Cortana to search cloud sources like OneDrive and SharePoint. T | ✔️ | | | |
+[AllowCortanaInAAD](/windows/client-management/mdm/policy-csp-search#search-allowcortanainaad) | This specifies whether the Cortana consent page can appear in the Azure Active Directory (AAD) device out-of-box-experience (OOBE) flow. | ✔️ | | | |
+| [AllowIndexingEncryptedStoresOrItems](/windows/client-management/mdm/policy-configuration-service-provider#search-allowindexingencryptedstoresoritems) | Allow or disallow the indexing of items. | ✔️ | | | |
+| [AllowSearchToUseLocation](/windows/client-management/mdm/policy-configuration-service-provider#search-allowsearchtouselocation) | Specify whether search can use location information. | ✔️ | | ✔️ | |
+| [AllowUsingDiacritics](/windows/client-management/mdm/policy-configuration-service-provider#search-allowusingdiacritics) | Allow the use of diacritics. | ✔️ | | | |
+| [AllowWindowsIndexer](/windows/client-management/mdm/policy-csp-search#search-allowwindowsindexer) | The indexer provides fast file, email, and web history search for apps and system components including Cortana, Outlook, file explorer, and Edge. To do this, it requires access to the file system and app data stores such as Outlook OST files.- **Off** setting disables Windows indexer- **EnterpriseSecure** setting stops the indexer from indexing encrypted files or stores, and is recommended for enterprises using Windows Information Protection (WIP)- **Enterprise** setting reduces potential network loads for enterprises- **Standard** setting is appropriate for consumers | ✔️ | | | |
+| [AlwaysUseAutoLangDetection](/windows/client-management/mdm/policy-configuration-service-provider#search-alwaysuseautolangdetection) | Specify whether to always use automatic language detection when indexing content and properties. | ✔️ | | | |
+| [DoNotUseWebResults](/windows/client-management/mdm/policy-configuration-service-provider#search-donotusewebresults) | Specify whether to allow Search to perform queries on the web. | ✔️ | | | |
+| [DisableBackoff](/windows/client-management/mdm/policy-configuration-service-provider#search-disablebackoff) | If enabled, the search indexer backoff feature will be disabled. | ✔️ | | | |
+| [DisableRemovableDriveIndexing](/windows/client-management/mdm/policy-configuration-service-provider#search-disableremovabledriveindexing) | Configure whether locations on removable drives can be added to libraries. | ✔️ | | | |
+| [PreventIndexingLowDiskSpaceMB](/windows/client-management/mdm/policy-configuration-service-provider#search-preventindexinglowdiskspacemb) | Prevent indexing from continuing after less than the specified amount of hard drive space is left on the same drive as the index location. | ✔️ | | | |
+| [PreventRemoteQueries](/windows/client-management/mdm/policy-configuration-service-provider#search-preventremotequeries) | If enabled, clients will be unable to query this device's index remotely. | ✔️ | | | |
+| [SafeSearchPermissions](/windows/client-management/mdm/policy-configuration-service-provider#search-safesearchpermissions) | Specify the level of safe search (filtering adult content) required. | | | | |
## Security
-| Setting | Description | Desktop editions | Mobile editions | Surface Hub | HoloLens | IoT Core |
-| --- | --- | :---: | :---: | :---: | :---: | :---: |
-| [AllowAddProvisioningPackage](/windows/client-management/mdm/policy-configuration-service-provider#security-allowaddprovisioningpackage) | Specify whether to allow installation of provisioning packages. | ✔️ | ✔️ | ✔️ | | ✔️ |
-| [AllowManualRootCertificateInstallation](/windows/client-management/mdm/policy-configuration-service-provider#security-allowmanualrootcertificateinstallation) | Specify whether the user is allowed to manually install root and intermediate CA certificates. | | ✔️ | | | |
-| [AllowRemoveProvisioningPackage](/windows/client-management/mdm/policy-configuration-service-provider#security-allowremoveprovisioningpackage) | Specify whether removal of provisioning packages is allowed. | ✔️ | ✔️ | ✔️ | | ✔️ |
-| [AntiTheftMode](/windows/client-management/mdm/policy-configuration-service-provider#security-antitheftmode) | Allow or disallow Anti Theft Mode on the device. | | ✔️ | | | |
-| [RequireDeviceEncryption](/windows/client-management/mdm/policy-configuration-service-provider#security-requiredeviceencryption) | Specify whether encryption is required. | ✔️ | ✔️ | ✔️ | ✔️ | ✔️ |
-| [RequireProvisioningPackageSignature](/windows/client-management/mdm/policy-configuration-service-provider#security-requireprovisioningpackagesignature) | Specify whether provisioning packages must have a certificate signed by a device-trusted authority. | ✔️ | ✔️ | ✔️ | | ✔️ |
-| [RequireRetrieveHealthCertificateOnBoot](/windows/client-management/mdm/policy-configuration-service-provider#security-requireretrievehealthcertificateonboot) | Specify whether to retrieve and post TCG Boot logs, and get or cache an encrypted or signed Health Attestation Report from the Microsoft Health Attestation Service when a device boots or reboots. | ✔️ | ✔️ | | | |
+| Setting | Description | Windows client | Surface Hub | HoloLens | IoT Core |
+| --- | --- | :---: | :---: | :---: | :---: |
+| [AllowAddProvisioningPackage](/windows/client-management/mdm/policy-configuration-service-provider#security-allowaddprovisioningpackage) | Specify whether to allow installation of provisioning packages. | ✔️ | ✔️ | | ✔️ |
+| [AllowManualRootCertificateInstallation](/windows/client-management/mdm/policy-configuration-service-provider#security-allowmanualrootcertificateinstallation) | Specify whether the user is allowed to manually install root and intermediate CA certificates. | | | | |
+| [AllowRemoveProvisioningPackage](/windows/client-management/mdm/policy-configuration-service-provider#security-allowremoveprovisioningpackage) | Specify whether removal of provisioning packages is allowed. | ✔️ | ✔️ | | ✔️ |
+| [AntiTheftMode](/windows/client-management/mdm/policy-configuration-service-provider#security-antitheftmode) | Allow or disallow Anti Theft Mode on the device. | | | | |
+| [RequireDeviceEncryption](/windows/client-management/mdm/policy-configuration-service-provider#security-requiredeviceencryption) | Specify whether encryption is required. | ✔️ | ✔️ | ✔️ | ✔️ |
+| [RequireProvisioningPackageSignature](/windows/client-management/mdm/policy-configuration-service-provider#security-requireprovisioningpackagesignature) | Specify whether provisioning packages must have a certificate signed by a device-trusted authority. | ✔️ | ✔️ | | ✔️ |
+| [RequireRetrieveHealthCertificateOnBoot](/windows/client-management/mdm/policy-configuration-service-provider#security-requireretrievehealthcertificateonboot) | Specify whether to retrieve and post TCG Boot logs, and get or cache an encrypted or signed Health Attestation Report from the Microsoft Health Attestation Service when a device boots or reboots. | ✔️ | | | |
## Settings
-| Setting | Description | Desktop editions | Mobile editions | Surface Hub | HoloLens | IoT Core |
-| --- | --- | :---: | :---: | :---: | :---: | :---: |
-| [AllowAutoPlay](/windows/client-management/mdm/policy-configuration-service-provider#settings-allowautoplay) | Allow the user to change AutoPlay settings. | | ✔️ | | | |
-| [AllowDataSense](/windows/client-management/mdm/policy-configuration-service-provider#settings-allowdatasense) | Allow the user to change Data Sense settings. | | ✔️ | | | |
-| [AllowVPN](/windows/client-management/mdm/policy-configuration-service-provider#settings-allowvpn) | Allow the user to change VPN settings. | | ✔️ | | ✔️ | |
-| [ConfigureTaskbarCalendar](/windows/client-management/mdm/policy-configuration-service-provider#settings-configuretaskbarcalendar) | Configure the default setting for showing additional calendars (besides the default calendar for the locale) in the taskbar clock and calendar flyout. | ✔️ | | | | |
-[PageVisiblityList](/windows/client-management/mdm/policy-csp-settings#settings-pagevisibilitylist) | Allows IT admins to prevent specific pages in the System Settings app from being visible or accessible. Pages are identified by a shortened version of their already [published URIs](/windows/uwp/launch-resume/launch-settings-app#ms-settings-uri-scheme-reference), which is the URI minus the "ms-settings:" prefix. For example, if the URI for a settings page is "ms-settings:foo", the page identifier used in the policy will be just "foo". Multiple page identifiers are separated by semicolons. | ✔️ | | | | |
+| Setting | Description | Windows client | Surface Hub | HoloLens | IoT Core |
+| --- | --- | :---: | :---: | :---: | :---: |
+| [AllowAutoPlay](/windows/client-management/mdm/policy-configuration-service-provider#settings-allowautoplay) | Allow the user to change AutoPlay settings. | | | | |
+| [AllowDataSense](/windows/client-management/mdm/policy-configuration-service-provider#settings-allowdatasense) | Allow the user to change Data Sense settings. | | | | |
+| [AllowVPN](/windows/client-management/mdm/policy-configuration-service-provider#settings-allowvpn) | Allow the user to change VPN settings. | | | ✔️ | |
+| [ConfigureTaskbarCalendar](/windows/client-management/mdm/policy-configuration-service-provider#settings-configuretaskbarcalendar) | Configure the default setting for showing additional calendars (besides the default calendar for the locale) in the taskbar clock and calendar flyout. | ✔️ | | | |
+[PageVisiblityList](/windows/client-management/mdm/policy-csp-settings#settings-pagevisibilitylist) | Allows IT admins to prevent specific pages in the System Settings app from being visible or accessible. Pages are identified by a shortened version of their already [published URIs](/windows/uwp/launch-resume/launch-settings-app#ms-settings-uri-scheme-reference), which is the URI minus the "ms-settings:" prefix. For example, if the URI for a settings page is "ms-settings:foo", the page identifier used in the policy will be just "foo". Multiple page identifiers are separated by semicolons. | ✔️ | | | |
## Start
-| Setting | Description | Desktop editions | Mobile editions | Surface Hub | HoloLens | IoT Core |
-| --- | --- | :---: | :---: | :---: | :---: | :---: |
-| [AllowPinnedFolderDocuments](/windows/client-management/mdm/policy-csp-start#start-allowpinnedfolderdocuments) | Control the visibility of the Documents shortcut on the Start menu. | ✔️ | | | | |
-| [AllowPinnedFolderDownloads](/windows/client-management/mdm/policy-csp-start#start-allowpinnedfolderdownloads) | Control the visibility of the Downloadds shortcut on the Start menu. | ✔️ | | | | |
-| [AllowPinnedFolderFileExplorer](/windows/client-management/mdm/policy-csp-start#start-allowpinnedfolderfileexplorer) | Control the visibility of the File Explorer shortcut on the Start menu. | ✔️ | | | | |
-| [AllowPinnedFolderHomeGroup](/windows/client-management/mdm/policy-csp-start#start-allowpinnedfolderhomegroup) | Control the visibility of the Home Group shortcut on the Start menu. | ✔️ | | | | |
-| [AllowPinnedFolderMusic](/windows/client-management/mdm/policy-csp-start#start-allowpinnedfoldermusic) | Control the visibility of the Music shortcut on the Start menu. | ✔️ | | | | |
-| [AllowPinnedFolderNetwork](/windows/client-management/mdm/policy-csp-start#start-allowpinnedfoldernetwork) | Control the visibility of the Network shortcut on the Start menu. | ✔️ | | | | |
-| [AllowPinnedFolderPersonalFolder](/windows/client-management/mdm/policy-csp-start#start-allowpinnedfolderpersonalfolder) | Control the visibility of the Personal Folder shortcut on the Start menu. | ✔️ | | | | |
-| [AllowPinnedFolderPictures](/windows/client-management/mdm/policy-csp-start#start-allowpinnedfolderpictures) | Control the visibility of the Pictures shortcut on the Start menu. | ✔️ | | | | |
-| [AllowPinnedFolderSettings](/windows/client-management/mdm/policy-csp-start#start-allowpinnedfoldersettings) | Control the visibility of the Settings shortcut on the Start menu. | ✔️ | | | | |
-| [AllowPinnedFolderVideos](/windows/client-management/mdm/policy-csp-start#start-allowpinnedfoldervideos) |Control the visibility of the Videos shortcut on the Start menu. | ✔️ | | | | |
-DisableContextMenus | Prevent context menus from being invoked in the Start menu. | ✔️ | | | | |
-| [ForceStartSize](/windows/client-management/mdm/policy-configuration-service-provider#start-forcestartsize) | Force the size of the Start screen. | ✔️ | | | | |
-| [HideAppList](/windows/client-management/mdm/policy-configuration-service-provider#start-hideapplist) | Collapse or remove the all apps list. | ✔️ | | | | |
-| [HideChangeAccountSettings](/windows/client-management/mdm/policy-configuration-service-provider#start-hidechangeaccountsettings) | Hide **Change account settings** from appearing in the user tile. | ✔️ | | | | |
-| [HideFrequentlyUsedApps](/windows/client-management/mdm/policy-configuration-service-provider#start-hidefrequentlyusedapps) | Hide **Most used** section of Start. | ✔️ | | | | |
-| [HideHibernate](/windows/client-management/mdm/policy-configuration-service-provider#start-hidehibernate) | Prevent **Hibernate** option from appearing in the Power button. | ✔️ | | | | |
-| [HideLock](/windows/client-management/mdm/policy-configuration-service-provider#start-hidelock) | Prevent **Lock** from appearing in the user tile. | ✔️ | | | | |
-| HidePeopleBar | Remove the people icon from the taskbar, as well as the corresponding settings toggle. It also prevents users from pinning people to the taskbar. | ✔️ | | | | |
-| [HidePowerButton](/windows/client-management/mdm/policy-configuration-service-provider#start-hidepowerbutton) | Hide the **Power** button. | ✔️ | | | | |
-| [HideRecentJumplists](/windows/client-management/mdm/policy-configuration-service-provider#start-hiderecentjumplists) | Hide jumplists of recently opened items. | ✔️ | | | | |
-| [HideRecentlyAddedApps](/windows/client-management/mdm/policy-configuration-service-provider#start-hiderecentlyaddedapps) | Hide **Recently added** section of Start. | ✔️ | | | | |
-| [HideRestart](/windows/client-management/mdm/policy-configuration-service-provider#start-hiderestart) | Prevent **Restart** and **Update and restart** from appearing in the Power button. | ✔️ | | | | |
-| [HideShutDown](/windows/client-management/mdm/policy-configuration-service-provider#start-hideshutdown) | Prevent **Shut down** and **Update and shut down** from appearing in the Power button. | ✔️ | | | | |
-| [HideSignOut](/windows/client-management/mdm/policy-configuration-service-provider#start-hidesignout) | Prevent **Sign out** from appearing in the user tile. | ✔️ | | | | |
-| [HideSleep](/windows/client-management/mdm/policy-configuration-service-provider#start-hidesleep) | Prevent **Sleep** from appearing in the Power button. | ✔️ | | | | |
-| [HideSwitchAccount](/windows/client-management/mdm/policy-configuration-service-provider#start-hideswitchaccount) | Prevent **Switch account** from appearing in the user tile. | ✔️ | | | | |
-| [HideUserTile](/windows/client-management/mdm/policy-configuration-service-provider#start-hideusertile) | Hide the user tile. | ✔️ | | | | |
-| [ImportEdgeAssets](/windows/client-management/mdm/policy-configuration-service-provider#start-importedgeassets) | Import Edge assets for secondary tiles. For more information, see [Add image for secondary Microsoft Edge tiles](../start-secondary-tiles.md). | ✔️ | | | | |
-| [NoPinningToTaskbar](/windows/client-management/mdm/policy-configuration-service-provider#start-nopinningtotaskbar) | Prevent users from pinning and unpinning apps on the taskbar. | ✔️ | | | | |
-| [StartLayout](/windows/client-management/mdm/policy-configuration-service-provider#start-startlayout) | Apply a custom Start layout. For more information, see [Customize Windows 10 Start and taskbar with provisioning packages](../customize-windows-10-start-screens-by-using-provisioning-packages-and-icd.md) | ✔️ | | | | |
+| Setting | Description | Windows client | Surface Hub | HoloLens | IoT Core |
+| --- | --- | :---: | :---: | :---: | :---: |
+| [AllowPinnedFolderDocuments](/windows/client-management/mdm/policy-csp-start#start-allowpinnedfolderdocuments) | Control the visibility of the Documents shortcut on the Start menu. | ✔️ | | | |
+| [AllowPinnedFolderDownloads](/windows/client-management/mdm/policy-csp-start#start-allowpinnedfolderdownloads) | Control the visibility of the Downloads shortcut on the Start menu. | ✔️ | | | |
+| [AllowPinnedFolderFileExplorer](/windows/client-management/mdm/policy-csp-start#start-allowpinnedfolderfileexplorer) | Control the visibility of the File Explorer shortcut on the Start menu. | ✔️ | | | |
+| [AllowPinnedFolderHomeGroup](/windows/client-management/mdm/policy-csp-start#start-allowpinnedfolderhomegroup) | Control the visibility of the Home Group shortcut on the Start menu. | ✔️ | | | |
+| [AllowPinnedFolderMusic](/windows/client-management/mdm/policy-csp-start#start-allowpinnedfoldermusic) | Control the visibility of the Music shortcut on the Start menu. | ✔️ | | | |
+| [AllowPinnedFolderNetwork](/windows/client-management/mdm/policy-csp-start#start-allowpinnedfoldernetwork) | Control the visibility of the Network shortcut on the Start menu. | ✔️ | | | |
+| [AllowPinnedFolderPersonalFolder](/windows/client-management/mdm/policy-csp-start#start-allowpinnedfolderpersonalfolder) | Control the visibility of the Personal Folder shortcut on the Start menu. | ✔️ | | | |
+| [AllowPinnedFolderPictures](/windows/client-management/mdm/policy-csp-start#start-allowpinnedfolderpictures) | Control the visibility of the Pictures shortcut on the Start menu. | ✔️ | | | |
+| [AllowPinnedFolderSettings](/windows/client-management/mdm/policy-csp-start#start-allowpinnedfoldersettings) | Control the visibility of the Settings shortcut on the Start menu. | ✔️ | | | |
+| [AllowPinnedFolderVideos](/windows/client-management/mdm/policy-csp-start#start-allowpinnedfoldervideos) |Control the visibility of the Videos shortcut on the Start menu. | ✔️ | | | |
+| DisableContextMenus | Prevent context menus from being invoked in the Start menu. | ✔️ | | | |
+| [ForceStartSize](/windows/client-management/mdm/policy-configuration-service-provider#start-forcestartsize) | Force the size of the Start screen. | ✔️ | | | |
+| [HideAppList](/windows/client-management/mdm/policy-configuration-service-provider#start-hideapplist) | Collapse or remove the all apps list. | ✔️ | | | |
+| [HideChangeAccountSettings](/windows/client-management/mdm/policy-configuration-service-provider#start-hidechangeaccountsettings) | Hide **Change account settings** from appearing in the user tile. | ✔️ | | | |
+| [HideFrequentlyUsedApps](/windows/client-management/mdm/policy-configuration-service-provider#start-hidefrequentlyusedapps) | Hide **Most used** section of Start. | ✔️ | | | |
+| [HideHibernate](/windows/client-management/mdm/policy-configuration-service-provider#start-hidehibernate) | Prevent **Hibernate** option from appearing in the Power button. | ✔️ | | | |
+| [HideLock](/windows/client-management/mdm/policy-configuration-service-provider#start-hidelock) | Prevent **Lock** from appearing in the user tile. | ✔️ | | | |
+| HidePeopleBar | Remove the people icon from the taskbar, as well as the corresponding settings toggle. It also prevents users from pinning people to the taskbar. | ✔️ | | | |
+| [HidePowerButton](/windows/client-management/mdm/policy-configuration-service-provider#start-hidepowerbutton) | Hide the **Power** button. | ✔️ | | | |
+| [HideRecentJumplists](/windows/client-management/mdm/policy-configuration-service-provider#start-hiderecentjumplists) | Hide jumplists of recently opened items. | ✔️ | | | |
+| [HideRecentlyAddedApps](/windows/client-management/mdm/policy-configuration-service-provider#start-hiderecentlyaddedapps) | Hide **Recently added** section of Start. | ✔️ | | | |
+| [HideRestart](/windows/client-management/mdm/policy-configuration-service-provider#start-hiderestart) | Prevent **Restart** and **Update and restart** from appearing in the Power button. | ✔️ | | | |
+| [HideShutDown](/windows/client-management/mdm/policy-configuration-service-provider#start-hideshutdown) | Prevent **Shut down** and **Update and shut down** from appearing in the Power button. | ✔️ | | | |
+| [HideSignOut](/windows/client-management/mdm/policy-configuration-service-provider#start-hidesignout) | Prevent **Sign out** from appearing in the user tile. | ✔️ | | | |
+| [HideSleep](/windows/client-management/mdm/policy-configuration-service-provider#start-hidesleep) | Prevent **Sleep** from appearing in the Power button. | ✔️ | | | |
+| [HideSwitchAccount](/windows/client-management/mdm/policy-configuration-service-provider#start-hideswitchaccount) | Prevent **Switch account** from appearing in the user tile. | ✔️ | | | |
+| [HideUserTile](/windows/client-management/mdm/policy-configuration-service-provider#start-hideusertile) | Hide the user tile. | ✔️ | | | |
+| [ImportEdgeAssets](/windows/client-management/mdm/policy-configuration-service-provider#start-importedgeassets) | Import Edge assets for secondary tiles. For more information, see [Add image for secondary Microsoft Edge tiles](../start-secondary-tiles.md). | ✔️ | | | |
+| [NoPinningToTaskbar](/windows/client-management/mdm/policy-configuration-service-provider#start-nopinningtotaskbar) | Prevent users from pinning and unpinning apps on the taskbar. | ✔️ | | | |
+| [StartLayout](/windows/client-management/mdm/policy-configuration-service-provider#start-startlayout) | Apply a custom Start layout. For more information, see [Customize Windows 10 Start and taskbar with provisioning packages](../customize-windows-10-start-screens-by-using-provisioning-packages-and-icd.md) | ✔️ | | | |
## System
-| Setting | Description | Desktop editions | Mobile editions | Surface Hub | HoloLens | IoT Core |
-| --- | --- | :---: | :---: | :---: | :---: | :---: |
-| [AllowBuildPreview](/windows/client-management/mdm/policy-configuration-service-provider#system-allowbuildpreview) | Specify whether users can access the Insider build controls in the **Advanced Options** for Windows Update. | ✔️ | ✔️ | | | |
-| [AllowEmbeddedMode](/windows/client-management/mdm/policy-configuration-service-provider#system-allowembeddedmode) | Specify whether to set general purpose device to be in embedded mode. | ✔️ | ✔️ | ✔️ | | ✔️ |
-| [AllowExperimentation](/windows/client-management/mdm/policy-configuration-service-provider#system-allowexperimentation) | Determine the level that Microsoft can experiment with the product to study user preferences or device behavior. | ✔️ | ✔️ | | | |
-| [AllowLocation](/windows/client-management/mdm/policy-configuration-service-provider#system-allowlocation) | Specify whether to allow app access to the Location service. | ✔️ | ✔️ | ✔️ | ✔️ | ✔️ |
-| [AllowStorageCard](/windows/client-management/mdm/policy-configuration-service-provider#system-allowstoragecard) | Specify whether the user is allowed to use the storage card for device storage. | ✔️ | ✔️ | ✔️ | | ✔️ |
-| [AllowTelemetry](/windows/client-management/mdm/policy-configuration-service-provider#system-allowtelemetry) | Allow the device to send diagnostic and usage data. | ✔️ | ✔️ | | ✔️ | |
-| [AllowUserToResetPhone](/windows/client-management/mdm/policy-configuration-service-provider#system-allowusertoresetphone) | Allow the user to factory reset the phone. | ✔️ | ✔️ | | | |
-ConfigureTelemetryOptInChangeNotification | This policy setting determines whether a device shows notifications about telemetry levels to people on first sign-in or when changes occur in Settings. | ✔️ | ✔️ | | | |
-ConfigureTelemetryOptInSettingsUx | This policy setting determines whether people can change their own telemetry levels in Settings | ✔️ | ✔️ | | | |
-| DisableDeviceDelete | Specify whether the delete diagnostic data is enabled in the Diagnostic & Feedback Settings page. | ✔️ | ✔️ | | | |
-| DisableDataDiagnosticViewer | Configure whether users can enable and launch the Diagnostic Data Viewer from the Diagnostic & Feedback Settings page. | ✔️ | ✔️ | | | |
-| [DisableOneDriveFileSync](/windows/client-management/mdm/policy-configuration-service-provider#system-disableonedrivefilesync) | Prevent apps and features from working with files on OneDrive. | ✔️ | | | | |
-| [LimitEnhancedDiagnosticDataWindowsAnalytics](/windows/client-management/mdm/policy-csp-system#system-limitenhanceddiagnosticdatawindowsanalytics) | This policy setting, in combination with the System/AllowTelemetry policy setting, enables organizations to send Microsoft a specific set of diagnostic data for IT insights via Windows Analytics services. To enable this behavior you must enable this policy setting, and set Allow Telemetry to level 2 (Enhanced). When you configure these policy settings, a basic level of diagnostic data plus additional events that are required for Windows Analytics are sent to Microsoft. These events are documented in [Windows 10, version 1703 basic level Windows diagnostic events and fields](/windows/privacy/enhanced-diagnostic-data-windows-analytics-events-and-fields). Enabling enhanced diagnostic data in the System/AllowTelemetry policy in combination with not configuring this policy will also send the required events for Windows Analytics, plus additional enhanced level diagnostic data. This setting has no effect on computers configured to send full, basic or security level diagnostic data to Microsoft. If you disable or do not configure this policy setting, then the level of diagnostic data sent to Microsoft is determined by the System/AllowTelemetry policy. | ✔️ | ✔️ | | | |
+| Setting | Description | Windows client | Surface Hub | HoloLens | IoT Core |
+| --- | --- | :---: | :---: | :---: | :---: |
+| [AllowBuildPreview](/windows/client-management/mdm/policy-configuration-service-provider#system-allowbuildpreview) | Specify whether users can access the Insider build controls in the **Advanced Options** for Windows Update. | ✔️ | | | |
+| [AllowEmbeddedMode](/windows/client-management/mdm/policy-configuration-service-provider#system-allowembeddedmode) | Specify whether to set general purpose device to be in embedded mode. | ✔️ | ✔️ | | ✔️ |
+| [AllowExperimentation](/windows/client-management/mdm/policy-configuration-service-provider#system-allowexperimentation) | Determine the level that Microsoft can experiment with the product to study user preferences or device behavior. | ✔️ | | | |
+| [AllowLocation](/windows/client-management/mdm/policy-configuration-service-provider#system-allowlocation) | Specify whether to allow app access to the Location service. | ✔️ | ✔️ | ✔️ | ✔️ |
+| [AllowStorageCard](/windows/client-management/mdm/policy-configuration-service-provider#system-allowstoragecard) | Specify whether the user is allowed to use the storage card for device storage. | ✔️ | ✔️ | | ✔️ |
+| [AllowTelemetry](/windows/client-management/mdm/policy-configuration-service-provider#system-allowtelemetry) | Allow the device to send diagnostic and usage data. | ✔️ | | ✔️ | |
+| [AllowUserToResetPhone](/windows/client-management/mdm/policy-configuration-service-provider#system-allowusertoresetphone) | Allow the user to factory reset the phone. | ✔️ | | | |
+ConfigureTelemetryOptInChangeNotification | This policy setting determines whether a device shows notifications about telemetry levels to people on first sign-in or when changes occur in Settings. | ✔️ | | | |
+ConfigureTelemetryOptInSettingsUx | This policy setting determines whether people can change their own telemetry levels in Settings | ✔️ | | | |
+| DisableDeviceDelete | Specify whether the delete diagnostic data is enabled in the Diagnostic & Feedback Settings page. | ✔️ | | | |
+| DisableDataDiagnosticViewer | Configure whether users can enable and launch the Diagnostic Data Viewer from the Diagnostic & Feedback Settings page. | ✔️ | | | |
+| [DisableOneDriveFileSync](/windows/client-management/mdm/policy-configuration-service-provider#system-disableonedrivefilesync) | Prevent apps and features from working with files on OneDrive. | ✔️ | | | |
+| [LimitEnhancedDiagnosticDataWindowsAnalytics](/windows/client-management/mdm/policy-csp-system#system-limitenhanceddiagnosticdatawindowsanalytics) | This policy setting, in combination with the System/AllowTelemetry policy setting, enables organizations to send Microsoft a specific set of diagnostic data for IT insights via Windows Analytics services. To enable this behavior you must enable this policy setting, and set Allow Telemetry to level 2 (Enhanced). When you configure these policy settings, a basic level of diagnostic data plus additional events that are required for Windows Analytics are sent to Microsoft. These events are documented in [Windows 10, version 1703 basic level Windows diagnostic events and fields](/windows/privacy/enhanced-diagnostic-data-windows-analytics-events-and-fields). Enabling enhanced diagnostic data in the System/AllowTelemetry policy in combination with not configuring this policy will also send the required events for Windows Analytics, plus additional enhanced level diagnostic data. This setting has no effect on computers configured to send full, basic or security level diagnostic data to Microsoft. If you disable or do not configure this policy setting, then the level of diagnostic data sent to Microsoft is determined by the System/AllowTelemetry policy. | ✔️ | | | |
## TextInput
-| Setting | Description | Desktop editions | Mobile editions | Surface Hub | HoloLens | IoT Core |
-| --- | --- | :---: | :---: | :---: | :---: | :---: |
-| [AllowIMELogging](/windows/client-management/mdm/policy-configuration-service-provider#textinput-allowimelogging) | Allow the user to turn on and off the logging for incorrect conversion and saving auto-tuning result to a file and history-based predictive input. | ✔️ | | | | |
-| [AllowIMENetworkAccess](/windows/client-management/mdm/policy-configuration-service-provider#textinput-allowimenetworkaccess) | Allow the user to turn on Open Extended Dictionary, Internet search integration, or cloud candidate features to provide input suggestions that do not exist in the device's local dictionary. | ✔️ | | | | |
-| [AllowInputPanel](/windows/client-management/mdm/policy-configuration-service-provider#textinput-allowinputpanel) | Disable the touch/handwriting keyboard. | ✔️ | | | | |
-| [AllowJapaneseIMESurrogatePairCharacters](/windows/client-management/mdm/policy-configuration-service-provider#textinput-allowjapaneseimesurrogatepaircharacters) | Allow the Japanese IME surrogate pair characters. | ✔️ | | | | |
-| [AllowJapaneseIVSCharacters](/windows/client-management/mdm/policy-configuration-service-provider#textinput-allowjapaneseivscharacters) | Allow Japanese Ideographic Variation Sequence (IVS) characters. | ✔️ | | | | |
-| [AllJapaneseNonPublishingStandardGlyph](/windows/client-management/mdm/policy-configuration-service-provider#textinput-allowjapanesenonpublishingstandardglyph) | All the Japanese non-publishing standard glyph. | ✔️ | | | | |
-| [AllowJapaneseUserDictionary](/windows/client-management/mdm/policy-configuration-service-provider#textinput-allowjapaneseuserdictionary) | Allow the Japanese user dictionary. | ✔️ | | | | |
-| [AllowKeyboardTextSuggestions](/windows/client-management/mdm/policy-configuration-service-provider#textinput-allowkeyboardtextsuggestions) | Specify whether text prediction is enabled or disabled for the on-screen keyboard, touch keyboard, and handwriting recognition tool. | ✔️ | | | | |
-| [AllowLanguageFeaturesUninstall](/windows/client-management/mdm/policy-configuration-service-provider#textinput-allowlanguagefeaturesuninstall) | All language features to be uninstalled. | ✔️ | | | | |
-| AllowUserInputsFromMiracastRecevier | Do not use. Instead, use [WirelessDisplay](#wirelessdisplay)/[AllowUserInputFromWirelessDisplayReceiver](/windows/client-management/mdm/policy-configuration-service-provider#wirelessdisplay-allowuserinputfromwirelessdisplayreceiver) | | | | | |
-| [ExcludeJapaneseIMEExceptISO208](/windows/client-management/mdm/policy-configuration-service-provider#textinput-excludejapaneseimeexceptjis0208) | Allow users to restrict character code range of conversion by setting the character filter. | ✔️ | | | | |
-| [ExcludeJapaneseIMEExceptISO208andEUDC](/windows/client-management/mdm/policy-configuration-service-provider#textinput-excludejapaneseimeexceptjis0208andeudc) | Allow users to restrict character code range of conversion by setting the character filter. | ✔️ | | | | |
-| [ExcludeJapaneseIMEExceptShiftJIS](/windows/client-management/mdm/policy-configuration-service-provider#textinput-excludejapaneseimeexceptshiftjis) | Allow users to restrict character code range of conversion by setting the character filter. | ✔️ | | | | |
+| Setting | Description | Windows client | Surface Hub | HoloLens | IoT Core |
+| --- | --- | :---: | :---: | :---: | :---: |
+| [AllowIMELogging](/windows/client-management/mdm/policy-configuration-service-provider#textinput-allowimelogging) | Allow the user to turn on and off the logging for incorrect conversion and saving auto-tuning result to a file and history-based predictive input. | ✔️ | | | |
+| [AllowIMENetworkAccess](/windows/client-management/mdm/policy-configuration-service-provider#textinput-allowimenetworkaccess) | Allow the user to turn on Open Extended Dictionary, Internet search integration, or cloud candidate features to provide input suggestions that do not exist in the device's local dictionary. | ✔️ | | | |
+| [AllowInputPanel](/windows/client-management/mdm/policy-configuration-service-provider#textinput-allowinputpanel) | Disable the touch/handwriting keyboard. | ✔️ | | | |
+| [AllowJapaneseIMESurrogatePairCharacters](/windows/client-management/mdm/policy-configuration-service-provider#textinput-allowjapaneseimesurrogatepaircharacters) | Allow the Japanese IME surrogate pair characters. | ✔️ | | | |
+| [AllowJapaneseIVSCharacters](/windows/client-management/mdm/policy-configuration-service-provider#textinput-allowjapaneseivscharacters) | Allow Japanese Ideographic Variation Sequence (IVS) characters. | ✔️ | | | |
+| [AllJapaneseNonPublishingStandardGlyph](/windows/client-management/mdm/policy-configuration-service-provider#textinput-allowjapanesenonpublishingstandardglyph) | All the Japanese non-publishing standard glyph. | ✔️ | | | |
+| [AllowJapaneseUserDictionary](/windows/client-management/mdm/policy-configuration-service-provider#textinput-allowjapaneseuserdictionary) | Allow the Japanese user dictionary. | ✔️ | | | |
+| [AllowKeyboardTextSuggestions](/windows/client-management/mdm/policy-configuration-service-provider#textinput-allowkeyboardtextsuggestions) | Specify whether text prediction is enabled or disabled for the on-screen keyboard, touch keyboard, and handwriting recognition tool. | ✔️ | | | |
+| [AllowLanguageFeaturesUninstall](/windows/client-management/mdm/policy-configuration-service-provider#textinput-allowlanguagefeaturesuninstall) | All language features to be uninstalled. | ✔️ | | | |
+| AllowUserInputsFromMiracastRecevier | Do not use. Instead, use [WirelessDisplay](#wirelessdisplay)/[AllowUserInputFromWirelessDisplayReceiver](/windows/client-management/mdm/policy-configuration-service-provider#wirelessdisplay-allowuserinputfromwirelessdisplayreceiver) | | | | |
+| [ExcludeJapaneseIMEExceptISO208](/windows/client-management/mdm/policy-configuration-service-provider#textinput-excludejapaneseimeexceptjis0208) | Allow users to restrict character code range of conversion by setting the character filter. | ✔️ | | | |
+| [ExcludeJapaneseIMEExceptISO208andEUDC](/windows/client-management/mdm/policy-configuration-service-provider#textinput-excludejapaneseimeexceptjis0208andeudc) | Allow users to restrict character code range of conversion by setting the character filter. | ✔️ | | | |
+| [ExcludeJapaneseIMEExceptShiftJIS](/windows/client-management/mdm/policy-configuration-service-provider#textinput-excludejapaneseimeexceptshiftjis) | Allow users to restrict character code range of conversion by setting the character filter. | ✔️ | | | |
## TimeLanguageSettings
-| Setting | Description | Desktop editions | Mobile editions | Surface Hub | HoloLens | IoT Core |
-| --- | --- | :---: | :---: | :---: | :---: | :---: |
-| [AllowSet24HourClock](/windows/client-management/mdm/policy-configuration-service-provider#timelanguagesettings-allowset24hourclock) | Configure the default clock setting to be the 24 hour format. | | ✔️ | | | |
+| Setting | Description | Windows client | Surface Hub | HoloLens | IoT Core |
+| --- | --- | :---: | :---: | :---: | :---: |
+| [AllowSet24HourClock](/windows/client-management/mdm/policy-configuration-service-provider#timelanguagesettings-allowset24hourclock) | Configure the default clock setting to be the 24 hour format. | | | | |
## Update
-| Setting | Description | Desktop editions | Mobile editions | Surface Hub | HoloLens | IoT Core |
-|--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------|-------------------------------------------------------------------------------------------------------------------------------------------------------|:----------------:|:---------------:|:-----------:|:--------:|:--------:|
-| [ActiveHoursEnd](/windows/client-management/mdm/policy-configuration-service-provider#update-activehoursend) | Use with **Update/ActiveHoursStart** to manage the range of active hours where update rboots are not scheduled. | ✔️ | ✔️ | ✔️ | | ✔️ |
-| [ActiveHoursMaxRange](/windows/client-management/mdm/policy-configuration-service-provider#update-activehoursmaxrange) | Specify the maximum active hours range. | ✔️ | ✔️ | ✔️ | | ✔️ |
-| [ActiveHoursStart](/windows/client-management/mdm/policy-configuration-service-provider#update-activehoursstart) | Use with **Update/ActiveHoursEnd** to manage the range of active hours where update reboots are not scheduled. | ✔️ | ✔️ | ✔️ | | ✔️ |
-| [AllowAutoUpdate](/windows/client-management/mdm/policy-configuration-service-provider#update-allowautoupdate) | Configure automatic update behavior to scan, download, and install updates. | ✔️ | ✔️ | ✔️ | ✔️ | ✔️ |
-| [AllowAutoWindowsUpdateDownloadOverMeteredNetwork](/windows/client-management/mdm/policy-csp-update#update-allowautowindowsupdatedownloadovermeterednetwork) | Option to download updates automatically over metered connections (off by default). Enter `0` for not allowed, or `1` for allowed. | ✔️ | ✔️ | ✔️ | | ✔️ |
-| [AllowMUUpdateService](/windows/client-management/mdm/policy-configuration-service-provider#update-allowmuupdateservice) | Manage whether to scan for app updates from Microsoft Update. | ✔️ | ✔️ | ✔️ | ✔️ | ✔️ |
-| [AllowNonMicrosoftSignedUpdate](/windows/client-management/mdm/policy-configuration-service-provider#update-allownonmicrosoftsignedupdate) | Manage whether Automatic Updates accepts updates signed by entities other than Microsoft when the update is found at the UpdateServiceUrl location. | ✔️ | ✔️ | ✔️ | | ✔️ |
-| [AllowUpdateService](/windows/client-management/mdm/policy-configuration-service-provider#update-allowupdateservice) | Specify whether the device can use Microsoft Update, Windows Server Update Services (WSUS), or Microsoft Store. | ✔️ | ✔️ | ✔️ | ✔️ | ✔️ |
-| [AutoRestartDeadlinePeriodInDays](/windows/client-management/mdm/policy-csp-update#update-autorestartdeadlineperiodindays) | Specify number of days (between 2 and 30) after which a forced restart will occur outside of active hours when restart is pending. | ✔️ | ✔️ | ✔️ | | ✔️ |
-| [AutoRestartDeadlinePeriodInDaysForFeatureUpdates](/windows/client-management/mdm/policy-csp-update#update-autorestartdeadlineperiodindaysforfeatureupdates) | Specify number of days (between 2 and 30) after which a forced restart will occur outside of active hours when restart is pending. | ✔️ | ✔️ | ✔️ | | ✔️ |
-| [AutoRestartNotificationSchedule](/windows/client-management/mdm/policy-configuration-service-provider#update-autorestartnotificationschedule) | Specify the period for auto-restart reminder notifications. | ✔️ | ✔️ | ✔️ | | ✔️ |
-| [AutoRestartRequiredNotificationDismissal](/windows/client-management/mdm/policy-configuration-service-provider#update-autorestartrequirednotificationdismissal) | Specify the method by which the auto-restart required notification is dismissed. | ✔️ | ✔️ | ✔️ | | ✔️ |
-| [BranchReadinessLevel](/windows/client-management/mdm/policy-configuration-service-provider#update-branchreadinesslevel) | Select which branch a device receives their updates from. | ✔️ | ✔️ | ✔️ | ✔️ | ✔️ |
-| [DeferFeatureUpdatesPeriodInDays](/windows/client-management/mdm/policy-configuration-service-provider#update-deferfeatureupdatesperiodindays) | Defer Feature Updates for the specified number of days. | ✔️ | ✔️ | ✔️ | | ✔️ |
-| [DeferQualityUpdatesPeriodInDays](/windows/client-management/mdm/policy-configuration-service-provider#update-deferqualityupdatesperiodindays) | Defer Quality Updates for the specified number of days. | ✔️ | ✔️ | ✔️ | | ✔️ |
-| [DeferUpdatePeriod](/windows/client-management/mdm/policy-csp-update#update-deferupdateperiod) | Specify update delays for up to 4 weeks. | ✔️ | ✔️ | ✔️ | ✔️ | ✔️ |
-| [DeferUpgradePeriod](/windows/client-management/mdm/policy-csp-update#update-deferupgradeperiod) | Specify upgrade delays for up to 8 months. | ✔️ | ✔️ | ✔️ | ✔️ | ✔️ |
-| [DetectionFrequency](/windows/client-management/mdm/policy-configuration-service-provider#update-detectionfrequency) | Specify the frequency to scan for updates, from every 1-22 hours. | ✔️ | ✔️ | ✔️ | ✔️ | ✔️ |
-| [DisableDualScan](/windows/client-management/mdm/policy-csp-update#update-disabledualscan) | Do not allow update deferral policies to cause scans against Windows Update. | ✔️ | ✔️ | ✔️ | | ✔️ |
-| [EngagedRestartDeadline](/windows/client-management/mdm/policy-configuration-service-provider#update-engagedrestartdeadline) | Specify the deadline in days before automatically scheduling and executing a pending restart outside of active hours. | ✔️ | ✔️ | ✔️ | | ✔️ |
-| [EngagedRestartDeadlineForFeatureUpdates](/windows/client-management/mdm/policy-configuration-service-provider#update-engagedrestartdeadlineforfeatureupdates) | Specify the deadline in days before automatically scheduling and executing a pending restart outside of active hours. | ✔️ | ✔️ | ✔️ | | ✔️ |
-| [EngagedRestartSnoozeSchedule](/windows/client-management/mdm/policy-configuration-service-provider#update-engagedrestartsnoozeschedule) | Specify the number of days a user can snooze Engaged restart reminder notifications. | ✔️ | ✔️ | ✔️ | | ✔️ |
-| [EngagedRestartSnoozeScheduleForFeatureUpdates](/windows/client-management/mdm/policy-configuration-service-provider#update-engagedrestartsnoozescheduleforfeatureupdates) | Specify the number of days a user can snooze Engaged restart reminder notifications. | ✔️ | ✔️ | ✔️ | | ✔️ |
-| [EngagedRestartTransitionSchedule](/windows/client-management/mdm/policy-configuration-service-provider#update-engagedrestarttransitionschedule) | Specify the timing before transitioning from Auto restarts scheduled outside of active hours to Engaged restart, which requires the user to schedule. | ✔️ | ✔️ | ✔️ | | ✔️ |
-| [EngagedRestartTransitionScheduleForFeatureUpdates](/windows/client-management/mdm/policy-configuration-service-provider#update-engagedrestarttransitionscheduleforfeatureupdates) | Specify the timing before transitioning from Auto restarts scheduled outside of active hours to Engaged restart, which requires the user to schedule. | ✔️ | ✔️ | ✔️ | | ✔️ |
-| [ExcludeWUDriversInQualityUpdate](/windows/client-management/mdm/policy-configuration-service-provider#update-excludewudriversinqualityupdate) | Exclude Windws Update (WU) drivers during quality updates. | ✔️ | | ✔️ | | ✔️ |
-| [FillEmptyContentUrls](/windows/client-management/mdm/policy-configuration-service-provider#update-fillemptycontenturls) | Allow Windows Update Agent to determine the download URL when it is missing from the metadata. | ✔️ | ✔️ | ✔️ | | ✔️ |
-| ManagePreviewBuilds | Use to enable or disable preview builds. | ✔️ | ✔️ | ✔️ | ✔️ | ✔️ |
-| PhoneUpdateRestrictions | Deprecated | | ✔️ | | | |
-| [RequireDeferUpgrade](/windows/client-management/mdm/policy-configuration-service-provider#update-requiredeferupgrade) | Configure device to receive updates from Current Branch for Business (CBB). | ✔️ | ✔️ | ✔️ | ✔️ | ✔️ |
-| [ScheduledInstallDay](/windows/client-management/mdm/policy-configuration-service-provider#update-scheduledinstallday) | Schedule the day for update installation. | ✔️ | ✔️ | ✔️ | ✔️ | ✔️ |
-| [ScheduledInstallEveryWeek](/windows/client-management/mdm/policy-csp-update#update-scheduledinstalleveryweek) | To schedule update installation every week, set the value as `1`. | ✔️ | ✔️ | ✔️ | ✔️ | ✔️ |
-| [ScheduledInstallFirstWeek](/windows/client-management/mdm/policy-csp-update#update-scheduledinstallfirstweek) | To schedule update installation the first week of the month, see the value as `1`. | ✔️ | ✔️ | ✔️ | ✔️ | ✔️ |
-| [ScheduledInstallFourthWeek](/windows/client-management/mdm/policy-csp-update#update-scheduledinstallfourthweek) | To schedule update installation the fourth week of the month, see the value as `1`. | ✔️ | ✔️ | ✔️ | ✔️ | ✔️ |
-| [ScheduledInstallSecondWeek](/windows/client-management/mdm/policy-csp-update#update-scheduledinstallsecondweek) | To schedule update installation the second week of the month, see the value as `1`. | ✔️ | ✔️ | ✔️ | ✔️ | ✔️ |
-| [ScheduledInstallThirdWeek](/windows/client-management/mdm/policy-csp-update#update-scheduledinstallthirdweek) | To schedule update installation the third week of the month, see the value as `1`. | ✔️ | ✔️ | ✔️ | ✔️ | ✔️ |
-| [ScheduledInstallTime](/windows/client-management/mdm/policy-configuration-service-provider#update-scheduledinstalltime) | Schedule the time for update installation. | ✔️ | ✔️ | ✔️ | ✔️ | ✔️ |
-| [ScheduleImminentRestartWarning](/windows/client-management/mdm/policy-configuration-service-provider#update-scheduleimminentrestartwarning) | Specify the period for auto-restart imminent warning notifications. | ✔️ | ✔️ | ✔️ | | ✔️ |
-| [ScheduleRestartWarning](/windows/client-management/mdm/policy-configuration-service-provider#update-schedulerestartwarning) | Specify the period for auto-restart warning reminder notifications. | ✔️ | ✔️ | ✔️ | | ✔️ |
-| [SetAutoRestartNotificationDisable](/windows/client-management/mdm/policy-configuration-service-provider#update-setautorestartnotificationdisable) | Disable auto-restart notifications for update installations. | ✔️ | ✔️ | ✔️ | | ✔️ |
-| [SetDisablePauseUXAccess](/windows/client-management/mdm/policy-configuration-service-provider#update-setdisablepauseuxaccess) | Disable access to scan Windows Update. | ✔️ | ✔️ | ✔️ | | ✔️ |
-| [SetDisableUXWUAccess](/windows/client-management/mdm/policy-configuration-service-provider#update-setdisableuxwuaccess) | Disable the **Pause updates** feature. | ✔️ | ✔️ | ✔️ | | ✔️ |
-| [SetEDURestart](/windows/client-management/mdm/policy-configuration-service-provider#update-setedurestart) | Skip the check for battery level to ensure that the reboot will happen at ScheduledInstallTime. | ✔️ | ✔️ | ✔️ | | ✔️ |
-| UpdateNotificationLevel | Specify whether to enable or disable Windows Update notifications, including restart warnings. | ✔️ | ✔️ | ✔️ | | ✔️ |
-| [UpdateServiceUrl](/windows/client-management/mdm/policy-configuration-service-provider#update-updateserviceurl) | Configure the device to check for updates from a WSUS server instead of Microsoft Update. | ✔️ | ✔️ | ✔️ | ✔️ | ✔️ |
-| [UpdateServiceUrlAlternate](/windows/client-management/mdm/policy-configuration-service-provider#update-updateserviceurlalternate) | Specify an alternate intranet server to host updates from Microsoft Update. | ✔️ | ✔️ | ✔️ | ✔️ | ✔️ |
+| Setting | Description | Windows client | Surface Hub | HoloLens | IoT Core |
+|---------|-------------|:--------------:|:-----------:|:--------:|:--------:|
+| [ActiveHoursEnd](/windows/client-management/mdm/policy-configuration-service-provider#update-activehoursend) | Use with **Update/ActiveHoursStart** to manage the range of active hours where update reboots are not scheduled. | ✔️ | ✔️ | | ✔️ |
+| [ActiveHoursMaxRange](/windows/client-management/mdm/policy-configuration-service-provider#update-activehoursmaxrange) | Specify the maximum active hours range. | ✔️ | ✔️ | | ✔️ |
+| [ActiveHoursStart](/windows/client-management/mdm/policy-configuration-service-provider#update-activehoursstart) | Use with **Update/ActiveHoursEnd** to manage the range of active hours where update reboots are not scheduled. | ✔️ | ✔️ | | ✔️ |
+| [AllowAutoUpdate](/windows/client-management/mdm/policy-configuration-service-provider#update-allowautoupdate) | Configure automatic update behavior to scan, download, and install updates. | ✔️ | ✔️ | ✔️ | ✔️ |
+| [AllowAutoWindowsUpdateDownloadOverMeteredNetwork](/windows/client-management/mdm/policy-csp-update#update-allowautowindowsupdatedownloadovermeterednetwork) | Option to download updates automatically over metered connections (off by default). Enter `0` for not allowed, or `1` for allowed. | ✔️ | ✔️ | | ✔️ |
+| [AllowMUUpdateService](/windows/client-management/mdm/policy-configuration-service-provider#update-allowmuupdateservice) | Manage whether to scan for app updates from Microsoft Update. | ✔️ | ✔️ | ✔️ | ✔️ |
+| [AllowNonMicrosoftSignedUpdate](/windows/client-management/mdm/policy-configuration-service-provider#update-allownonmicrosoftsignedupdate) | Manage whether Automatic Updates accepts updates signed by entities other than Microsoft when the update is found at the UpdateServiceUrl location. | ✔️ | ✔️ | | ✔️ |
+| [AllowUpdateService](/windows/client-management/mdm/policy-configuration-service-provider#update-allowupdateservice) | Specify whether the device can use Microsoft Update, Windows Server Update Services (WSUS), or Microsoft Store. | ✔️ | ✔️ | ✔️ | ✔️ |
+| [AutoRestartDeadlinePeriodInDays](/windows/client-management/mdm/policy-csp-update#update-autorestartdeadlineperiodindays) | Specify number of days (between 2 and 30) after which a forced restart will occur outside of active hours when restart is pending. | ✔️ | ✔️ | | ✔️ |
+| [AutoRestartDeadlinePeriodInDaysForFeatureUpdates](/windows/client-management/mdm/policy-csp-update#update-autorestartdeadlineperiodindaysforfeatureupdates) | Specify number of days (between 2 and 30) after which a forced restart will occur outside of active hours when restart is pending. | ✔️ | ✔️ | | ✔️ |
+| [AutoRestartNotificationSchedule](/windows/client-management/mdm/policy-configuration-service-provider#update-autorestartnotificationschedule) | Specify the period for auto-restart reminder notifications. | ✔️ | ✔️ | | ✔️ |
+| [AutoRestartRequiredNotificationDismissal](/windows/client-management/mdm/policy-configuration-service-provider#update-autorestartrequirednotificationdismissal) | Specify the method by which the auto-restart required notification is dismissed. | ✔️ | ✔️ | | ✔️ |
+| [BranchReadinessLevel](/windows/client-management/mdm/policy-configuration-service-provider#update-branchreadinesslevel) | Select which branch a device receives their updates from. | ✔️ | ✔️ | ✔️ | ✔️ |
+| [DeferFeatureUpdatesPeriodInDays](/windows/client-management/mdm/policy-configuration-service-provider#update-deferfeatureupdatesperiodindays) | Defer Feature Updates for the specified number of days. | ✔️ | ✔️ | | ✔️ |
+| [DeferQualityUpdatesPeriodInDays](/windows/client-management/mdm/policy-configuration-service-provider#update-deferqualityupdatesperiodindays) | Defer Quality Updates for the specified number of days. | ✔️ | ✔️ | | ✔️ |
+| [DeferUpdatePeriod](/windows/client-management/mdm/policy-csp-update#update-deferupdateperiod) | Specify update delays for up to 4 weeks. | ✔️ | ✔️ | ✔️ | ✔️ |
+| [DeferUpgradePeriod](/windows/client-management/mdm/policy-csp-update#update-deferupgradeperiod) | Specify upgrade delays for up to 8 months. | ✔️ | ✔️ | ✔️ | ✔️ |
+| [DetectionFrequency](/windows/client-management/mdm/policy-configuration-service-provider#update-detectionfrequency) | Specify the frequency to scan for updates, from every 1-22 hours. | ✔️ | ✔️ | ✔️ | ✔️ |
+| [DisableDualScan](/windows/client-management/mdm/policy-csp-update#update-disabledualscan) | Do not allow update deferral policies to cause scans against Windows Update. | ✔️ | ✔️ | | ✔️ |
+| [EngagedRestartDeadline](/windows/client-management/mdm/policy-configuration-service-provider#update-engagedrestartdeadline) | Specify the deadline in days before automatically scheduling and executing a pending restart outside of active hours. | ✔️ | ✔️ | | ✔️ |
+| [EngagedRestartDeadlineForFeatureUpdates](/windows/client-management/mdm/policy-configuration-service-provider#update-engagedrestartdeadlineforfeatureupdates) | Specify the deadline in days before automatically scheduling and executing a pending restart outside of active hours. | ✔️ | ✔️ | | ✔️ |
+| [EngagedRestartSnoozeSchedule](/windows/client-management/mdm/policy-configuration-service-provider#update-engagedrestartsnoozeschedule) | Specify the number of days a user can snooze Engaged restart reminder notifications. | ✔️ | ✔️ | | ✔️ |
+| [EngagedRestartSnoozeScheduleForFeatureUpdates](/windows/client-management/mdm/policy-configuration-service-provider#update-engagedrestartsnoozescheduleforfeatureupdates) | Specify the number of days a user can snooze Engaged restart reminder notifications. | ✔️ | ✔️ | | ✔️ |
+| [EngagedRestartTransitionSchedule](/windows/client-management/mdm/policy-configuration-service-provider#update-engagedrestarttransitionschedule) | Specify the timing before transitioning from Auto restarts scheduled outside of active hours to Engaged restart, which requires the user to schedule. | ✔️ | ✔️ | | ✔️ |
+| [EngagedRestartTransitionScheduleForFeatureUpdates](/windows/client-management/mdm/policy-configuration-service-provider#update-engagedrestarttransitionscheduleforfeatureupdates) | Specify the timing before transitioning from Auto restarts scheduled outside of active hours to Engaged restart, which requires the user to schedule. | ✔️ | ✔️ | | ✔️ |
+| [ExcludeWUDriversInQualityUpdate](/windows/client-management/mdm/policy-configuration-service-provider#update-excludewudriversinqualityupdate) | Exclude Windows Update (WU) drivers during quality updates. | ✔️ | ✔️ | | ✔️ |
+| [FillEmptyContentUrls](/windows/client-management/mdm/policy-configuration-service-provider#update-fillemptycontenturls) | Allow Windows Update Agent to determine the download URL when it is missing from the metadata. | ✔️ | ✔️ | | ✔️ |
+| ManagePreviewBuilds | Use to enable or disable preview builds. | ✔️ | ✔️ | ✔️ | ✔️ |
+| PhoneUpdateRestrictions | Deprecated | | ✔️ | | |
+| [RequireDeferUpgrade](/windows/client-management/mdm/policy-configuration-service-provider#update-requiredeferupgrade) | Configure device to receive updates from Current Branch for Business (CBB). | ✔️ | ✔️ | ✔️ | ✔️ |
+| [ScheduledInstallDay](/windows/client-management/mdm/policy-configuration-service-provider#update-scheduledinstallday) | Schedule the day for update installation. | ✔️ | ✔️ | ✔️ | ✔️ |
+| [ScheduledInstallEveryWeek](/windows/client-management/mdm/policy-csp-update#update-scheduledinstalleveryweek) | To schedule update installation every week, set the value as `1`. | ✔️ | ✔️ | ✔️ | ✔️ |
+| [ScheduledInstallFirstWeek](/windows/client-management/mdm/policy-csp-update#update-scheduledinstallfirstweek) | To schedule update installation the first week of the month, see the value as `1`. | ✔️ | ✔️ | ✔️ | ✔️ |
+| [ScheduledInstallFourthWeek](/windows/client-management/mdm/policy-csp-update#update-scheduledinstallfourthweek) | To schedule update installation the fourth week of the month, see the value as `1`. | ✔️ | ✔️ | ✔️ | ✔️ |
+| [ScheduledInstallSecondWeek](/windows/client-management/mdm/policy-csp-update#update-scheduledinstallsecondweek) | To schedule update installation the second week of the month, see the value as `1`. | ✔️ | ✔️ | ✔️ | ✔️ |
+| [ScheduledInstallThirdWeek](/windows/client-management/mdm/policy-csp-update#update-scheduledinstallthirdweek) | To schedule update installation the third week of the month, see the value as `1`. | ✔️ | ✔️ | ✔️ | ✔️ |
+| [ScheduledInstallTime](/windows/client-management/mdm/policy-configuration-service-provider#update-scheduledinstalltime) | Schedule the time for update installation. | ✔️ | ✔️ | ✔️ | ✔️ |
+| [ScheduleImminentRestartWarning](/windows/client-management/mdm/policy-configuration-service-provider#update-scheduleimminentrestartwarning) | Specify the period for auto-restart imminent warning notifications. | ✔️ | ✔️ | | ✔️ |
+| [ScheduleRestartWarning](/windows/client-management/mdm/policy-configuration-service-provider#update-schedulerestartwarning) | Specify the period for auto-restart warning reminder notifications. | ✔️ | ✔️ | | ✔️ |
+| [SetAutoRestartNotificationDisable](/windows/client-management/mdm/policy-configuration-service-provider#update-setautorestartnotificationdisable) | Disable auto-restart notifications for update installations. | ✔️ | ✔️ | | ✔️ |
+| [SetDisablePauseUXAccess](/windows/client-management/mdm/policy-configuration-service-provider#update-setdisablepauseuxaccess) | Disable access to scan Windows Update. | ✔️ | ✔️ | | ✔️ |
+| [SetDisableUXWUAccess](/windows/client-management/mdm/policy-configuration-service-provider#update-setdisableuxwuaccess) | Disable the **Pause updates** feature. | ✔️ | ✔️ | | ✔️ |
+| [SetEDURestart](/windows/client-management/mdm/policy-configuration-service-provider#update-setedurestart) | Skip the check for battery level to ensure that the reboot will happen at ScheduledInstallTime. | ✔️ | ✔️ | | ✔️ |
+| UpdateNotificationLevel | Specify whether to enable or disable Windows Update notifications, including restart warnings. | ✔️ | ✔️ | | ✔️ |
+| [UpdateServiceUrl](/windows/client-management/mdm/policy-configuration-service-provider#update-updateserviceurl) | Configure the device to check for updates from a WSUS server instead of Microsoft Update. | ✔️ | ✔️ | ✔️ | ✔️ |
+| [UpdateServiceUrlAlternate](/windows/client-management/mdm/policy-configuration-service-provider#update-updateserviceurlalternate) | Specify an alternate intranet server to host updates from Microsoft Update. | ✔️ | ✔️ | ✔️ | ✔️ |
## WiFi
-| Setting | Description | Desktop editions | Mobile editions | Surface Hub | HoloLens | IoT Core |
-| --- | --- | :---: | :---: | :---: | :---: | :---: |
-| [AllowAutoConnectToWiFiSenseHotspots](/windows/client-management/mdm/policy-configuration-service-provider#wifi-allowautoconnecttowifisensehotspots) | Allow the device to connect automatically to Wi-Fi hotspots. | ✔️ | ✔️ | | | |
-| [AllowInternetSharing](/windows/client-management/mdm/policy-configuration-service-provider#wifi-allowinternetsharing) | Allow Internet sharing. | ✔️ | ✔️ | | | |
-| [AllowManualWiFiConfiguration](/windows/client-management/mdm/policy-configuration-service-provider#wifi-allowmanualwificonfiguration) | Allow connecting to Wi-Fi outside of MDM server-installed networks. | | ✔️ | | | |
-| [AllowWiFi](/windows/client-management/mdm/policy-configuration-service-provider#wifi-allowwifi) | Allow Wi-Fi connections. | | ✔️ | | | |
-| [WLANScanMode](/windows/client-management/mdm/policy-configuration-service-provider#wifi-wlanscanmode) | Configure the WLAN scanning behavior and how aggressively devices should be actively scanning for Wi-Fi networks to get devices connected. | ✔️ | ✔️ | ✔️ | | ✔️ |
+| Setting | Description | Windows client | Surface Hub | HoloLens | IoT Core |
+| --- | --- | :---: | :---: | :---: | :---: |
+| [AllowAutoConnectToWiFiSenseHotspots](/windows/client-management/mdm/policy-configuration-service-provider#wifi-allowautoconnecttowifisensehotspots) | Allow the device to connect automatically to Wi-Fi hotspots. | ✔️ | | | |
+| [AllowInternetSharing](/windows/client-management/mdm/policy-configuration-service-provider#wifi-allowinternetsharing) | Allow Internet sharing. | ✔️ | | | |
+| [AllowManualWiFiConfiguration](/windows/client-management/mdm/policy-configuration-service-provider#wifi-allowmanualwificonfiguration) | Allow connecting to Wi-Fi outside of MDM server-installed networks. | | | | |
+| [AllowWiFi](/windows/client-management/mdm/policy-configuration-service-provider#wifi-allowwifi) | Allow Wi-Fi connections. | | | | |
+| [WLANScanMode](/windows/client-management/mdm/policy-configuration-service-provider#wifi-wlanscanmode) | Configure the WLAN scanning behavior and how aggressively devices should be actively scanning for Wi-Fi networks to get devices connected. | ✔️ | ✔️ | | ✔️ |
## WindowsInkWorkspace
-| Setting | Description | Desktop editions | Mobile editions | Surface Hub | HoloLens | IoT Core |
-| --- | --- | :---: | :---: | :---: | :---: | :---: |
-| [AllowSuggestedAppsInWindowsInkWorkspace](/windows/client-management/mdm/policy-configuration-service-provider#windowsinkworkspace-allowsuggestedappsinwindowsinkworkspace) | Show recommended app suggestions in the ink workspace. | ✔️ | | | | |
-| [AllowWindowsInkWorkspace](/windows/client-management/mdm/policy-configuration-service-provider#windowsinkworkspace-allowwindowsinkworkspace) | Specify whether to allow the user to access the ink workspace. | ✔️ | | | | |
+| Setting | Description | Windows client | Surface Hub | HoloLens | IoT Core |
+| --- | --- | :---: | :---: | :---: | :---: |
+| [AllowSuggestedAppsInWindowsInkWorkspace](/windows/client-management/mdm/policy-configuration-service-provider#windowsinkworkspace-allowsuggestedappsinwindowsinkworkspace) | Show recommended app suggestions in the ink workspace. | ✔️ | | | |
+| [AllowWindowsInkWorkspace](/windows/client-management/mdm/policy-configuration-service-provider#windowsinkworkspace-allowwindowsinkworkspace) | Specify whether to allow the user to access the ink workspace. | ✔️ | | | |
## WindowsLogon
-| Setting | Description | Desktop editions | Mobile editions | Surface Hub | HoloLens | IoT Core |
-| --- | --- | :---: | :---: | :---: | :---: | :---: |
-| [HideFastUserSwitching](/windows/client-management/mdm/policy-configuration-service-provider#windowslogon-hidefastuserswitching) | Hide the **Switch account** button on the sign-in screen, Start, and the Task Manager. | ✔️ | | | | |
+
+| Setting | Description | Windows client | Surface Hub | HoloLens | IoT Core |
+| --- | --- | :---: | :---: | :---: | :---: |
+| [HideFastUserSwitching](/windows/client-management/mdm/policy-configuration-service-provider#windowslogon-hidefastuserswitching) | Hide the **Switch account** button on the sign-in screen, Start, and the Task Manager. | ✔️ | | | |
## WirelessDisplay
-| Setting | Description | Desktop editions | Mobile editions | Surface Hub | HoloLens | IoT Core |
-| --- | --- | :---: | :---: | :---: | :---: | :---: |
-| [AllowUserInputFromWirelessDisplayReceiver](/windows/client-management/mdm/policy-configuration-service-provider#wirelessdisplay-allowuserinputfromwirelessdisplayreceiver) | This policy controls whether or not the wireless display can send input (keyboard, mouse, pen, and touch, dependent upon display support) back to the source device. For example, a Surface Laptop is projecting wirelessly to a Surface Hub. If input from the wireless display receiver is allowed, users can draw with a pen on the Surface Hub. | ✔️ | ✔️ | | | |
+| Setting | Description | Windows client | Surface Hub | HoloLens | IoT Core |
+| --- | --- | :---: | :---: | :---: | :---: |
+| [AllowUserInputFromWirelessDisplayReceiver](/windows/client-management/mdm/policy-configuration-service-provider#wirelessdisplay-allowuserinputfromwirelessdisplayreceiver) | This policy controls whether or not the wireless display can send input (keyboard, mouse, pen, and touch, dependent upon display support) back to the source device. For example, a Surface Laptop is projecting wirelessly to a Surface Hub. If input from the wireless display receiver is allowed, users can draw with a pen on the Surface Hub. | ✔️ | | | |
diff --git a/windows/configuration/wcd/wcd-privacy.md b/windows/configuration/wcd/wcd-privacy.md
index 5904abff0c..867728c6b3 100644
--- a/windows/configuration/wcd/wcd-privacy.md
+++ b/windows/configuration/wcd/wcd-privacy.md
@@ -17,9 +17,9 @@ Use **Privacy** to configure settings for app activation with voice.
## Applies to
-| Setting | Desktop editions | Mobile editions | Surface Hub | HoloLens | IoT Core |
-| --- | :---: | :---: | :---: | :---: | :---: |
-| All settings | ✔️ | ✔️ | ✔️ | | ✔️ |
+| Setting | Windows client | Surface Hub | HoloLens | IoT Core |
+| --- | :---: | :---: | :---: | :---: |
+| All settings | ✔️ | ✔️ | | ✔️ |
## LetAppsActivateWithVoice
@@ -27,4 +27,4 @@ Select between **User is in control**, **Force allow**, or **Force deny**.
## LetAppsActivateWithVoiceAboveLock
-Select between **User is in control**, **Force allow**, or **Force deny**.
\ No newline at end of file
+Select between **User is in control**, **Force allow**, or **Force deny**.
diff --git a/windows/configuration/wcd/wcd-provisioningcommands.md b/windows/configuration/wcd/wcd-provisioningcommands.md
index 51ca4daddb..dab5b939b7 100644
--- a/windows/configuration/wcd/wcd-provisioningcommands.md
+++ b/windows/configuration/wcd/wcd-provisioningcommands.md
@@ -19,9 +19,9 @@ Use ProvisioningCommands settings to install Windows desktop applications using
## Applies to
-| Setting | Desktop editions | Mobile editions | Surface Hub | HoloLens | IoT Core |
-| --- | :---: | :---: | :---: | :---: | :---: |
-| All settings | ✔️ | | | | |
+| Setting | Windows client | Surface Hub | HoloLens | IoT Core |
+| --- | :---: | :---: | :---: | :---: |
+| All settings | ✔️ | | | |
For instructions on adding apps to provisioning packages, see [Provision PCs with apps](../provisioning-packages/provision-pcs-with-apps.md).
diff --git a/windows/configuration/wcd/wcd-sharedpc.md b/windows/configuration/wcd/wcd-sharedpc.md
index 2cee7eec84..3dd25e3954 100644
--- a/windows/configuration/wcd/wcd-sharedpc.md
+++ b/windows/configuration/wcd/wcd-sharedpc.md
@@ -20,9 +20,9 @@ Use SharedPC settings to optimize Windows 10 for shared use scenarios, such as t
## Applies to
-| Setting | Desktop editions | Mobile editions | Surface Hub | HoloLens | IoT Core |
-| --- | :---: | :---: | :---: | :---: | :---: |
-| All settings | ✔️ | | | | |
+| Setting | Windows client | Surface Hub | HoloLens | IoT Core |
+| --- | :---: | :---: | :---: | :---: |
+| All settings | ✔️ | | | |
## AccountManagement
diff --git a/windows/configuration/wcd/wcd-smisettings.md b/windows/configuration/wcd/wcd-smisettings.md
index f378d5f114..ed3dbc5df6 100644
--- a/windows/configuration/wcd/wcd-smisettings.md
+++ b/windows/configuration/wcd/wcd-smisettings.md
@@ -19,9 +19,9 @@ Use SMISettings settings to customize the device with custom shell, suppress Win
## Applies to
-| Setting | Desktop editions | Mobile editions | Surface Hub | HoloLens | IoT Core |
-| --- | :---: | :---: | :---: | :---: | :---: |
-| All settings | ✔️ | | | | |
+| Setting | Windows client | Surface Hub | HoloLens | IoT Core |
+| --- | :---: | :---: | :---: | :---: |
+| All settings | ✔️ | | | |
## All settings in SMISettings
diff --git a/windows/configuration/wcd/wcd-start.md b/windows/configuration/wcd/wcd-start.md
index cd1ddd0c36..b5e9674a75 100644
--- a/windows/configuration/wcd/wcd-start.md
+++ b/windows/configuration/wcd/wcd-start.md
@@ -19,12 +19,12 @@ Use Start settings to apply a customized Start screen to devices.
## Applies to
-| Setting | Desktop editions | Surface Hub | HoloLens | IoT Core |
+| Setting | Windows client | Surface Hub | HoloLens | IoT Core |
| --- | :---: | :---: | :---: | :---: |
| StartLayout | ✔️ | | | |
>[!IMPORTANT]
->The StartLayout setting is available in the advanced provisioning for Windows 10 desktop editions, but shouldn't be used. For desktop editions, use [Policies > StartLayout](wcd-policies.md#start).
+>The StartLayout setting is available in the advanced provisioning for Windows 10, but shouldn't be used. For Windows client, use [Policies > StartLayout](wcd-policies.md#start).
## StartLayout
diff --git a/windows/configuration/wcd/wcd-startupapp.md b/windows/configuration/wcd/wcd-startupapp.md
index 84b5fbc1cd..49815cf169 100644
--- a/windows/configuration/wcd/wcd-startupapp.md
+++ b/windows/configuration/wcd/wcd-startupapp.md
@@ -19,8 +19,8 @@ Use StartupApp settings to configure the default app that will run on start for
## Applies to
-| Setting | Desktop editions | Mobile editions | Surface Hub | HoloLens | IoT Core |
-| --- | :---: | :---: | :---: | :---: | :---: |
-| Default | | | | | ✔️ |
+| Setting | Windows client | Surface Hub | HoloLens | IoT Core |
+| --- | :---: | :---: | :---: | :---: |
+| Default | | | | ✔️ |
Enter the [Application User Model ID (AUMID)](/windows-hardware/customize/enterprise/find-the-application-user-model-id-of-an-installed-app) for the default app.
\ No newline at end of file
diff --git a/windows/configuration/wcd/wcd-startupbackgroundtasks.md b/windows/configuration/wcd/wcd-startupbackgroundtasks.md
index 375b29173c..7d169c131d 100644
--- a/windows/configuration/wcd/wcd-startupbackgroundtasks.md
+++ b/windows/configuration/wcd/wcd-startupbackgroundtasks.md
@@ -19,7 +19,7 @@ Documentation not available at this time.
## Applies to
-| Setting | Desktop editions | Mobile editions | Surface Hub | HoloLens | IoT Core |
-| --- | :---: | :---: | :---: | :---: | :---: |
-| All settings | | | | | ✔️ |
+| Setting | Windows client | Surface Hub | HoloLens | IoT Core |
+| --- | :---: | :---: | :---: | :---: |
+| All settings | | | | ✔️ |
diff --git a/windows/configuration/wcd/wcd-storaged3inmodernstandby.md b/windows/configuration/wcd/wcd-storaged3inmodernstandby.md
index bf25d4dfd0..d48b954521 100644
--- a/windows/configuration/wcd/wcd-storaged3inmodernstandby.md
+++ b/windows/configuration/wcd/wcd-storaged3inmodernstandby.md
@@ -22,6 +22,6 @@ Use **StorageD3InModernStandby** to enable or disable low-power state (D3) durin
## Applies to
-| Setting | Desktop editions | Mobile editions | Surface Hub | HoloLens | IoT Core |
-| --- | :---: | :---: | :---: | :---: | :---: |
-| All settings | ✔️ | ✔️ | ✔️ | | ✔️ |
\ No newline at end of file
+| Setting | Windows client | Surface Hub | HoloLens | IoT Core |
+| --- | :---: | :---: | :---: | :---: |
+| All settings | ✔️ | ✔️ | | ✔️ |
\ No newline at end of file
diff --git a/windows/configuration/wcd/wcd-surfacehubmanagement.md b/windows/configuration/wcd/wcd-surfacehubmanagement.md
index d0492b9ac5..edf2a819ed 100644
--- a/windows/configuration/wcd/wcd-surfacehubmanagement.md
+++ b/windows/configuration/wcd/wcd-surfacehubmanagement.md
@@ -24,9 +24,9 @@ Use SurfaceHubManagement settings to set the administrator group that will manag
## Applies to
-| Setting | Desktop editions | Mobile editions | Surface Hub | HoloLens | IoT Core |
-| --- | :---: | :---: | :---: | :---: | :---: |
-| All settings | | | ✔️ | | |
+| Setting | Windows client | Surface Hub | HoloLens | IoT Core |
+| --- | :---: | :---: | :---: | :---: |
+| All settings | | ✔️ | | |
## GroupName
diff --git a/windows/configuration/wcd/wcd-tabletmode.md b/windows/configuration/wcd/wcd-tabletmode.md
index 6f1c67bfb8..e97c3ebf6e 100644
--- a/windows/configuration/wcd/wcd-tabletmode.md
+++ b/windows/configuration/wcd/wcd-tabletmode.md
@@ -19,9 +19,9 @@ Use TabletMode to configure settings related to tablet mode.
## Applies to
-| Setting | Desktop editions | Mobile editions | Surface Hub | HoloLens | IoT Core |
-| --- | :---: | :---: | :---: | :---: | :---: |
-| All settings | ✔️ | ✔️ | ✔️ | | |
+| Setting | Windows client | Surface Hub | HoloLens | IoT Core |
+| --- | :---: | :---: | :---: | :---: |
+| All settings | ✔️ | ✔️ | | |
## ConvertibleSlateModePromptPreference
diff --git a/windows/configuration/wcd/wcd-takeatest.md b/windows/configuration/wcd/wcd-takeatest.md
index 0f3d22d642..f9f3708a13 100644
--- a/windows/configuration/wcd/wcd-takeatest.md
+++ b/windows/configuration/wcd/wcd-takeatest.md
@@ -19,9 +19,9 @@ Use TakeATest to configure the Take A Test app, a secure browser for test-taking
## Applies to
-| Setting | Desktop editions | Mobile editions | Surface Hub | HoloLens | IoT Core |
-| --- | :---: | :---: | :---: | :---: | :---: |
-| All settings | ✔️ | | | | |
+| Setting | Windows client | Surface Hub | HoloLens | IoT Core |
+| --- | :---: | :---: | :---: | :---: |
+| All settings | ✔️ | | | |
## AllowScreenMonitoring
diff --git a/windows/configuration/wcd/wcd-time.md b/windows/configuration/wcd/wcd-time.md
index 1efcbc613a..259df9fdd1 100644
--- a/windows/configuration/wcd/wcd-time.md
+++ b/windows/configuration/wcd/wcd-time.md
@@ -17,9 +17,9 @@ Use **Time** to configure settings for time zone setup for Windows 10, version (
## Applies to
-| Setting | Desktop editions | Mobile editions | Surface Hub | HoloLens | IoT Core |
-| --- | :---: | :---: | :---: | :---: | :---: |
-| [ProvisionSetTimeZone](#provisionsettimezone) | ✔️ | | | | |
+| Setting | Windows client | Surface Hub | HoloLens | IoT Core |
+| --- | :---: | :---: | :---: | :---: |
+| [ProvisionSetTimeZone](#provisionsettimezone) | ✔️ | | | |
## ProvisionSetTimeZone
diff --git a/windows/configuration/wcd/wcd-unifiedwritefilter.md b/windows/configuration/wcd/wcd-unifiedwritefilter.md
index 2463513137..c5586d1c3a 100644
--- a/windows/configuration/wcd/wcd-unifiedwritefilter.md
+++ b/windows/configuration/wcd/wcd-unifiedwritefilter.md
@@ -40,9 +40,9 @@ The overlay doesn't mirror the entire volume. It dynamically grows to keep track
## Applies to
-| Setting | Desktop editions | Mobile editions | Surface Hub | HoloLens | IoT Core |
-| --- | :---: | :---: | :---: | :---: | :---: |
-| All settings | ✔️ | | | | ✔️ |
+| Setting | Windows client | Surface Hub | HoloLens | IoT Core |
+| --- | :---: | :---: | :---: | :---: |
+| All settings | ✔️ | | | ✔️ |
## FilterEnabled
diff --git a/windows/configuration/wcd/wcd-universalappinstall.md b/windows/configuration/wcd/wcd-universalappinstall.md
index 2085c5e99a..0822937da4 100644
--- a/windows/configuration/wcd/wcd-universalappinstall.md
+++ b/windows/configuration/wcd/wcd-universalappinstall.md
@@ -22,13 +22,13 @@ Use UniversalAppInstall settings to install Windows apps from the Microsoft Stor
## Applies to
-| Setting | Desktop editions | Mobile editions | Surface Hub | HoloLens | IoT Core |
-| --- | :---: | :---: | :---: | :---: | :---: |
-| [DeviceContextApp](#devicecontextapp) | ✔️ | | ✔️ | | |
-| [DeviceContextAppLicense](#devicecontextapplicense) | ✔️ | | ✔️ | | |
-| [StoreInstall](#storeinstall) | ✔️ | ✔️ | ✔️ | | ✔️ |
-| [UserContextApp](#usercontextapp) | ✔️ | ✔️ | ✔️ | | ✔️ |
-| [UserContextAppLicense](#usercontextapplicense) | ✔️ | ✔️ | ✔️ | | ✔️ |
+| Setting | Windows client | Surface Hub | HoloLens | IoT Core |
+| --- | :---: | :---: | :---: | :---: |
+| [DeviceContextApp](#devicecontextapp) | ✔️ | ✔️ | | |
+| [DeviceContextAppLicense](#devicecontextapplicense) | ✔️ | ✔️ | | |
+| [StoreInstall](#storeinstall) | ✔️ | ✔️ | | ✔️ |
+| [UserContextApp](#usercontextapp) | ✔️ | ✔️ | | ✔️ |
+| [UserContextAppLicense](#usercontextapplicense) | ✔️ | ✔️ | | ✔️ |
## DeviceContextApp
diff --git a/windows/configuration/wcd/wcd-universalappuninstall.md b/windows/configuration/wcd/wcd-universalappuninstall.md
index 0ae1ade853..625891ae05 100644
--- a/windows/configuration/wcd/wcd-universalappuninstall.md
+++ b/windows/configuration/wcd/wcd-universalappuninstall.md
@@ -20,10 +20,10 @@ Use UniversalAppUninstall settings to uninstall or remove Windows apps.
## Applies to
-| Setting | Desktop editions | Mobile editions | Surface Hub | HoloLens | IoT Core |
-| --- | :---: | :---: | :---: | :---: | :---: |
-| [RemoveProvisionedApp](#removeprovisionedapp) | ✔️ | | | | |
-| [Uninstall](#uninstall) | ✔️ | ✔️ | ✔️ | | ✔️ |
+| Setting | Windows client | Surface Hub | HoloLens | IoT Core |
+| --- | :---: | :---: | :---: | :---: |
+| [RemoveProvisionedApp](#removeprovisionedapp) | ✔️ | | | |
+| [Uninstall](#uninstall) | ✔️ | ✔️ | | ✔️ |
## RemoveProvisionedApp
diff --git a/windows/configuration/wcd/wcd-usberrorsoemoverride.md b/windows/configuration/wcd/wcd-usberrorsoemoverride.md
index 9b4fc26665..3eb9975d01 100644
--- a/windows/configuration/wcd/wcd-usberrorsoemoverride.md
+++ b/windows/configuration/wcd/wcd-usberrorsoemoverride.md
@@ -20,9 +20,9 @@ Allows an OEM to hide the USB option UI in Settings and all USB device errors.
## Applies to
-| Setting | Desktop editions | Mobile editions | Surface Hub | HoloLens | IoT Core |
-| --- | :---: | :---: | :---: | :---: | :---: |
-| [HideUsbErrorNotifyOptionUI](#hideusberrornotifyoptionui) | ✔️ | ✔️ | ✔️ | ✔️ | |
+| Setting | Windows client | Surface Hub | HoloLens | IoT Core |
+| --- | :---: | :---: | :---: | :---: |
+| [HideUsbErrorNotifyOptionUI](#hideusberrornotifyoptionui) | ✔️ | ✔️ | ✔️ | |
## HideUsbErrorNotifyOptionUI
diff --git a/windows/configuration/wcd/wcd-weakcharger.md b/windows/configuration/wcd/wcd-weakcharger.md
index 0f57e581fd..ce9f3ab265 100644
--- a/windows/configuration/wcd/wcd-weakcharger.md
+++ b/windows/configuration/wcd/wcd-weakcharger.md
@@ -20,10 +20,10 @@ Use WeakCharger settings to configure the charger notification UI.
## Applies to
-| Setting | Desktop editions | Mobile editions | Surface Hub | HoloLens | IoT Core |
-| --- | :---: | :---: | :---: | :---: | :---: |
-| [HideWeakChargerNotifyOptionUI](#hideweakchargernotifyoptionui) | ✔️ | ✔️ | ✔️ | | |
-| [NotifyOnWeakCharger](#notifyonweakcharger) | ✔️ | ✔️ | ✔️ | | |
+| Setting | Windows client | Surface Hub | HoloLens | IoT Core |
+| --- | :---: | :---: | :---: | :---: |
+| [HideWeakChargerNotifyOptionUI](#hideweakchargernotifyoptionui) | ✔️ | ✔️ | | |
+| [NotifyOnWeakCharger](#notifyonweakcharger) | ✔️ | ✔️ | | |
## HideWeakChargerNotifyOptionUI
diff --git a/windows/configuration/wcd/wcd-windowshelloforbusiness.md b/windows/configuration/wcd/wcd-windowshelloforbusiness.md
index d000b9facc..fc0d8fbd54 100644
--- a/windows/configuration/wcd/wcd-windowshelloforbusiness.md
+++ b/windows/configuration/wcd/wcd-windowshelloforbusiness.md
@@ -19,9 +19,9 @@ Use WindowsHelloForBusiness settings to specify whether [FIDO2 security keys for
## Applies to
-| Setting groups | Desktop editions | Mobile editions | Surface Hub | HoloLens | IoT Core |
-| --- | :---: | :---: | :---: | :---: | :---: |
-| [SecurityKeys](#securitykeys) | ✔️ | | | | |
+| Setting groups | Windows client | Surface Hub | HoloLens | IoT Core |
+| --- | :---: | :---: | :---: | :---: |
+| [SecurityKeys](#securitykeys) | ✔️ | | | |
## SecurityKeys
diff --git a/windows/configuration/wcd/wcd-windowsteamsettings.md b/windows/configuration/wcd/wcd-windowsteamsettings.md
index a4e82b4a0e..9307518bf1 100644
--- a/windows/configuration/wcd/wcd-windowsteamsettings.md
+++ b/windows/configuration/wcd/wcd-windowsteamsettings.md
@@ -20,9 +20,9 @@ Use WindowsTeamSettings settings to configure Surface Hub.
## Applies to
-| Setting | Desktop editions | Mobile editions | Surface Hub | HoloLens | IoT Core |
-| --- | :---: | :---: | :---: | :---: | :---: |
-| All settings | | | ✔️ | | |
+| Setting | Windows client | Surface Hub | HoloLens | IoT Core |
+| --- | :---: | :---: | :---: | :---: |
+| All settings | | ✔️ | | |
## Connect
diff --git a/windows/configuration/wcd/wcd-wlan.md b/windows/configuration/wcd/wcd-wlan.md
index 2a746063eb..8b931bc90a 100644
--- a/windows/configuration/wcd/wcd-wlan.md
+++ b/windows/configuration/wcd/wcd-wlan.md
@@ -20,7 +20,7 @@ Do not use at this time. Instead, use [ConnectivityProfiles > WLAN](wcd-connecti
## Applies to
-| Setting | Desktop editions | Mobile editions | Surface Hub | HoloLens | IoT Core |
-| --- | :---: | :---: | :---: | :---: | :---: |
-| All settings | | | | | |
+| Setting | Windows client | Surface Hub | HoloLens | IoT Core |
+| --- | :---: | :---: | :---: | :---: |
+| All settings | | | | |
diff --git a/windows/configuration/wcd/wcd-workplace.md b/windows/configuration/wcd/wcd-workplace.md
index 48f7826dc9..e810f28679 100644
--- a/windows/configuration/wcd/wcd-workplace.md
+++ b/windows/configuration/wcd/wcd-workplace.md
@@ -20,9 +20,9 @@ Use Workplace settings to configure bulk user enrollment to a mobile device mana
## Applies to
-| Setting | Desktop editions | Mobile editions | Surface Hub | HoloLens | IoT Core |
-| --- | :---: | :---: | :---: | :---: | :---: |
-| [Enrollments](#enrollments) | ✔️ | ✔️ | ✔️ | | ✔️ |
+| Setting | Windows client | Surface Hub | HoloLens | IoT Core |
+| --- | :---: | :---: | :---: | :---: |
+| [Enrollments](#enrollments) | ✔️ | ✔️ | | ✔️ |
## Enrollments
diff --git a/windows/configuration/wcd/wcd.md b/windows/configuration/wcd/wcd.md
index 0d09e59143..952a247ff3 100644
--- a/windows/configuration/wcd/wcd.md
+++ b/windows/configuration/wcd/wcd.md
@@ -18,7 +18,7 @@ This section describes the settings that you can configure in [provisioning pack
## Edition that each group of settings applies to
-| Setting group | Desktop editions | Surface Hub | HoloLens | IoT Core |
+| Setting group | Windows client | Surface Hub | HoloLens | IoT Core |
| --- | :---: | :---: | :---: | :---: |
| [AccountManagement](wcd-accountmanagement.md) | | | ✔️ | |
| [Accounts](wcd-accounts.md) | ✔️ | ✔️ | ✔️ | ✔️ |
diff --git a/windows/deployment/windows-10-subscription-activation.md b/windows/deployment/windows-10-subscription-activation.md
index 4d6d62258a..b1ac84715b 100644
--- a/windows/deployment/windows-10-subscription-activation.md
+++ b/windows/deployment/windows-10-subscription-activation.md
@@ -231,7 +231,7 @@ If you are running Windows 10, version 1803 or later, Subscription Activation wi
If you are using Windows 10, version 1607, 1703, or 1709 and have already deployed Windows 10 Enterprise, but you want to move away from depending on KMS servers and MAK keys for Windows client machines, you can seamlessly transition as long as the computer has been activated with a firmware-embedded Windows 10 Pro product key.
-If the computer has never been activated with a Pro key, run the following script. Copy the text below into a .cmd file and run the file from an elevated command prompt:
+If the computer has never been activated with a Pro key, run the following script. Copy the text below into a `.cmd` file, and run the file from an elevated command prompt:
```console
@echo off
@@ -249,6 +249,12 @@ changepk.exe /ProductKey %ProductKey%
)
```
+Since [WMIC was deprecated](/windows/win32/wmisdk/wmic) in Windows 10, version 21H1, you can use the following Windows PowerShell script instead:
+
+```powershell
+$(Get-WmiObject SoftwareLicensingService).OA3xOriginalProductKey | foreach{ if ( $null -ne $_ ) { Write-Host "Installing"$_;.\changepk.exe /Productkey $_ } else { Write-Host "No key present" } }
+```
+
### Obtaining an Azure AD license
Enterprise Agreement/Software Assurance (EA/SA):
diff --git a/windows/manage/TOC.yml b/windows/manage/TOC.yml
new file mode 100644
index 0000000000..892ce64421
--- /dev/null
+++ b/windows/manage/TOC.yml
@@ -0,0 +1,2 @@
+- name: Test
+ href: test.md
diff --git a/windows/manage/test.md b/windows/manage/test.md
new file mode 100644
index 0000000000..36d16a3f6b
--- /dev/null
+++ b/windows/manage/test.md
@@ -0,0 +1,19 @@
+---
+title: Test
+description: Test
+ms.prod: w11
+ms.mktglfcycl: deploy
+ms.sitesec: library
+author: dstrome
+ms.author: dstrome
+ms.reviewer:
+manager: dstrome
+ms.topic: article
+---
+
+# Test
+
+## Deployment planning
+
+This article provides guidance to help you plan for Windows 11 in your organization.
+
diff --git a/windows/security/information-protection/tpm/how-windows-uses-the-tpm.md b/windows/security/information-protection/tpm/how-windows-uses-the-tpm.md
index 038e7da093..3688226a4f 100644
--- a/windows/security/information-protection/tpm/how-windows-uses-the-tpm.md
+++ b/windows/security/information-protection/tpm/how-windows-uses-the-tpm.md
@@ -23,6 +23,7 @@ The Windows operating system improves most existing security features in the ope
**See also:**
+- [Windows 11 Specifications](https://www.microsoft.com/windows/windows-11-specifications)
- [Windows 10 Specifications](https://www.microsoft.com/windows/windows-10-specifications)
@@ -58,9 +59,9 @@ Although CNG sounds like a mundane starting point, it illustrates some of the ad
The Platform Crypto Provider, introduced in the Windows 8 operating system, exposes the following special TPM properties, which software-only CNG providers cannot offer or cannot offer as effectively:
-• **Key protection**. The Platform Crypto Provider can create keys in the TPM with restrictions on their use. The operating system can load and use the keys in the TPM without copying the keys to system memory, where they are vulnerable to malware. The Platform Crypto Provider can also configure keys that a TPM protects so that they are not removable. If a TPM creates a key, the key is unique and resides only in that TPM. If the TPM imports a key, the Platform Crypto Provider can use the key in that TPM, but that TPM is not a source for making more copies of the key or enabling the use of copies elsewhere. In sharp contrast, software solutions that protect keys from copying are subject to reverse-engineering attacks, in which someone figures out how the solution stores keys or makes copies of keys while they are in memory during use.
+- **Key protection**. The Platform Crypto Provider can create keys in the TPM with restrictions on their use. The operating system can load and use the keys in the TPM without copying the keys to system memory, where they are vulnerable to malware. The Platform Crypto Provider can also configure keys that a TPM protects so that they are not removable. If a TPM creates a key, the key is unique and resides only in that TPM. If the TPM imports a key, the Platform Crypto Provider can use the key in that TPM, but that TPM is not a source for making more copies of the key or enabling the use of copies elsewhere. In sharp contrast, software solutions that protect keys from copying are subject to reverse-engineering attacks, in which someone figures out how the solution stores keys or makes copies of keys while they are in memory during use.
-• **Dictionary attack protection**. Keys that a TPM protects can require an authorization value such as a PIN. With dictionary attack protection, the TPM can prevent attacks that attempt a large number of guesses to determine the PIN. After too many guesses, the TPM simply returns an error saying no more guesses are allowed for a period of time. Software solutions might provide similar features, but they cannot provide the same level of protection, especially if the system restarts, the system clock changes, or files on the hard disk that count failed guesses are rolled back. In addition, with dictionary attack protection, authorization values such as PINs can be shorter and easier to remember while still providing the same level of protection as more complex values when using software solutions.
+- **Dictionary attack protection**. Keys that a TPM protects can require an authorization value such as a PIN. With dictionary attack protection, the TPM can prevent attacks that attempt a large number of guesses to determine the PIN. After too many guesses, the TPM simply returns an error saying no more guesses are allowed for a period of time. Software solutions might provide similar features, but they cannot provide the same level of protection, especially if the system restarts, the system clock changes, or files on the hard disk that count failed guesses are rolled back. In addition, with dictionary attack protection, authorization values such as PINs can be shorter and easier to remember while still providing the same level of protection as more complex values when using software solutions.
These TPM features give Platform Crypto Provider distinct advantages over software-based solutions. A practical way to see these benefits in action is when using certificates on a Windows device. On platforms that include a TPM, Windows can use the Platform Crypto Provider to provide certificate storage. Certificate templates can specify that a TPM use the Platform Crypto Provider to protect the key associated with a certificate. In mixed environments, where some computers might not have a TPM, the certificate template could prefer the Platform Crypto Provider over the standard Windows software provider. If a certificate is configured as not able to be exported, the private key for the certificate is restricted and cannot be exported from the TPM. If the certificate requires a PIN, the PIN gains the TPM’s dictionary attack protection automatically.
@@ -80,12 +81,11 @@ The adoption of new authentication technology requires that identity providers a
Identity providers have flexibility in how they provision credentials on client devices. For example, an organization might provision only those devices that have a TPM so that the organization knows that a TPM protects the credentials. The ability to distinguish a TPM from malware acting like a TPM requires the following TPM capabilities (see Figure 1):
-• **Endorsement key**. The TPM manufacturer can create a special key in the TPM called an *endorsement key*. An endorsement key certificate, signed by the manufacturer, says that the endorsement key is present in a TPM that the manufacturer made. Solutions can use the certificate with the TPM containing the endorsement key to confirm a scenario really involves a TPM from a specific TPM manufacturer (instead of malware acting like a TPM.
+- **Endorsement key**. The TPM manufacturer can create a special key in the TPM called an *endorsement key*. An endorsement key certificate, signed by the manufacturer, says that the endorsement key is present in a TPM that the manufacturer made. Solutions can use the certificate with the TPM containing the endorsement key to confirm a scenario really involves a TPM from a specific TPM manufacturer (instead of malware acting like a TPM.
-• **Attestation identity key**. To protect privacy, most TPM scenarios do not directly use an actual endorsement key. Instead, they use attestation identity keys, and an identity certificate authority (CA) uses the endorsement key and its certificate to prove that one or more attestation identity keys actually exist in a real TPM. The identity CA issues attestation identity key certificates. More than one identity CA will generally see the same endorsement key certificate that can uniquely identify the TPM, but any number of attestation identity key certificates can be created to limit the information shared in other scenarios.
-
-
+- **Attestation identity key**. To protect privacy, most TPM scenarios do not directly use an actual endorsement key. Instead, they use attestation identity keys, and an identity certificate authority (CA) uses the endorsement key and its certificate to prove that one or more attestation identity keys actually exist in a real TPM. The identity CA issues attestation identity key certificates. More than one identity CA will generally see the same endorsement key certificate that can uniquely identify the TPM, but any number of attestation identity key certificates can be created to limit the information shared in other scenarios.
+:::image type="content" alt-text="TPM Capabilities." source="images/tpm-capabilities.png" lightbox="images/tpm-capabilities.png":::
*Figure 1: TPM Cryptographic Key Management*
For Windows Hello for Business, Microsoft can fill the role of the identity CA. Microsoft services can issue an attestation identity key certificate for each device, user, and identify provider to ensure that privacy is protected and to help identity providers ensure that device TPM requirements are met before Windows Hello for Business credentials are provisioned.
@@ -96,9 +96,9 @@ BitLocker provides full-volume encryption to protect data at rest. The most comm
In the most common configuration, BitLocker encrypts the operating system volume so that if the computer or hard disk is lost or stolen when powered off, the data on the volume remains confidential. When the computer is turned on, starts normally, and proceeds to the Windows logon prompt, the only path forward is for the user to log on with his or her credentials, allowing the operating system to enforce its normal file permissions. If something about the boot process changes, however—for example, a different operating system is booted from a USB device—the operating system volume and user data cannot be read and are not accessible. The TPM and system firmware collaborate to record measurements of how the system started, including loaded software and configuration details such as whether boot occurred from the hard drive or a USB device. BitLocker relies on the TPM to allow the use of a key only when startup occurs in an expected way. The system firmware and TPM are carefully designed to work together to provide the following capabilities:
-• **Hardware root of trust for measurement**. A TPM allows software to send it commands that record measurements of software or configuration information. This information can be calculated using a hash algorithm that essentially transforms a lot of data into a small, statistically unique hash value. The system firmware has a component called the Core Root of Trust for Measurement (CRTM) that is implicitly trusted. The CRTM unconditionally hashes the next software component and records the measurement value by sending a command to the TPM. Successive components, whether system firmware or operating system loaders, continue the process by measuring any software components they load before running them. Because each component’s measurement is sent to the TPM before it runs, a component cannot erase its measurement from the TPM. (However, measurements are erased when the system is restarted.) The result is that at each step of the system startup process, the TPM holds measurements of boot software and configuration information. Any changes in boot software or configuration yield different TPM measurements at that step and later steps. Because the system firmware unconditionally starts the measurement chain, it provides a hardware-based root of trust for the TPM measurements. At some point in the startup process, the value of recording all loaded software and configuration information diminishes and the chain of measurements stops. The TPM allows for the creation of keys that can be used only when the platform configuration registers that hold the measurements have specific values.
+- **Hardware root of trust for measurement**. A TPM allows software to send it commands that record measurements of software or configuration information. This information can be calculated using a hash algorithm that essentially transforms a lot of data into a small, statistically unique hash value. The system firmware has a component called the Core Root of Trust for Measurement (CRTM) that is implicitly trusted. The CRTM unconditionally hashes the next software component and records the measurement value by sending a command to the TPM. Successive components, whether system firmware or operating system loaders, continue the process by measuring any software components they load before running them. Because each component’s measurement is sent to the TPM before it runs, a component cannot erase its measurement from the TPM. (However, measurements are erased when the system is restarted.) The result is that at each step of the system startup process, the TPM holds measurements of boot software and configuration information. Any changes in boot software or configuration yield different TPM measurements at that step and later steps. Because the system firmware unconditionally starts the measurement chain, it provides a hardware-based root of trust for the TPM measurements. At some point in the startup process, the value of recording all loaded software and configuration information diminishes and the chain of measurements stops. The TPM allows for the creation of keys that can be used only when the platform configuration registers that hold the measurements have specific values.
-• **Key used only when boot measurements are accurate**. BitLocker creates a key in the TPM that can be used only when the boot measurements match an expected value. The expected value is calculated for the step in the startup process when Windows Boot Manager runs from the operating system volume on the system hard drive. Windows Boot Manager, which is stored unencrypted on the boot volume, needs to use the TPM key so that it can decrypt data read into memory from the operating system volume and startup can proceed using the encrypted operating system volume. If a different operating system is booted or the configuration is changed, the measurement values in the TPM will be different, the TPM will not let Windows Boot Manager use the key, and the startup process cannot proceed normally because the data on the operating system cannot be decrypted. If someone tries to boot the system with a different operating system or a different device, the software or configuration measurements in the TPM will be wrong and the TPM will not allow use of the key needed to decrypt the operating system volume. As a failsafe, if measurement values change unexpectedly, the user can always use the BitLocker recovery key to access volume data. Organizations can configure BitLocker to store the recovery key-in Active Directory Domain Services (AD DS).
+- **Key used only when boot measurements are accurate**. BitLocker creates a key in the TPM that can be used only when the boot measurements match an expected value. The expected value is calculated for the step in the startup process when Windows Boot Manager runs from the operating system volume on the system hard drive. Windows Boot Manager, which is stored unencrypted on the boot volume, needs to use the TPM key so that it can decrypt data read into memory from the operating system volume and startup can proceed using the encrypted operating system volume. If a different operating system is booted or the configuration is changed, the measurement values in the TPM will be different, the TPM will not let Windows Boot Manager use the key, and the startup process cannot proceed normally because the data on the operating system cannot be decrypted. If someone tries to boot the system with a different operating system or a different device, the software or configuration measurements in the TPM will be wrong and the TPM will not allow use of the key needed to decrypt the operating system volume. As a failsafe, if measurement values change unexpectedly, the user can always use the BitLocker recovery key to access volume data. Organizations can configure BitLocker to store the recovery key-in Active Directory Domain Services (AD DS).
Device hardware characteristics are important to BitLocker and its ability to protect data. One consideration is whether the device provides attack vectors when the system is at the logon screen. For example, if the Windows device has a port that allows direct memory access so that someone can plug in hardware and read memory, an attacker can read the operating system volume’s decryption key from memory while at the Windows logon screen. To mitigate this risk, organizations can configure BitLocker so that the TPM key requires both the correct software measurements and an authorization value. The system startup process stops at Windows Boot Manager, and the user is prompted to enter the authorization value for the TPM key or insert a USB device with the value. This process stops BitLocker from automatically loading the key into memory where it might be vulnerable, but has a less desirable user experience.
@@ -122,12 +122,11 @@ TPM measurements are designed to avoid recording any privacy-sensitive informati
The TPM provides the following way for scenarios to use the measurements recorded in the TPM during boot:
-• **Remote Attestation**. Using an attestation identity key, the TPM can generate and cryptographically sign a statement (or*quote*) of the current measurements in the TPM. Windows can create unique attestation identity keys for various scenarios to prevent separate evaluators from collaborating to track the same device. Additional information in the quote is cryptographically scrambled to limit information sharing and better protect privacy. By sending the quote to a remote entity, a device can attest which software and configuration settings were used to boot the device and initialize the operating system. An attestation identity key certificate can provide further assurance that the quote is coming from a real TPM. Remote attestation is the process of recording measurements in the TPM, generating a quote, and sending the quote information to another system that evaluates the measurements to establish trust in a device. Figure 2 illustrates this process.
+- **Remote Attestation**. Using an attestation identity key, the TPM can generate and cryptographically sign a statement (or*quote*) of the current measurements in the TPM. Windows can create unique attestation identity keys for various scenarios to prevent separate evaluators from collaborating to track the same device. Additional information in the quote is cryptographically scrambled to limit information sharing and better protect privacy. By sending the quote to a remote entity, a device can attest which software and configuration settings were used to boot the device and initialize the operating system. An attestation identity key certificate can provide further assurance that the quote is coming from a real TPM. Remote attestation is the process of recording measurements in the TPM, generating a quote, and sending the quote information to another system that evaluates the measurements to establish trust in a device. Figure 2 illustrates this process.
When new security features are added to Windows, Measured Boot adds security-relevant configuration information to the measurements recorded in the TPM. Measured Boot enables remote attestation scenarios that reflect the system firmware and the Windows initialization state.
-
-
+:::image type="content" alt-text="Process to Create Evidence of Boot Software and Configuration Using TPM." source="images/process-to-create-evidence-of-boot-software-and-configuration-using-tpm.png" lightbox="images/process-to-create-evidence-of-boot-software-and-configuration-using-tpm.png":::
*Figure 2: Process used to create evidence of boot software and configuration using a TPM*
@@ -149,17 +148,18 @@ The resulting solution provides defense in depth, because even if malware runs i
The TPM adds hardware-based security benefits to Windows. When installed on hardware that includes a TPM, Window delivers remarkably improved security benefits. The following table summarizes the key benefits of the TPM’s major features.
+
|Feature | Benefits when used on a system with a TPM|
|---|---|
-| Platform Crypto Provider | • If the machine is compromised, the private key associated with the certificate cannot be copied off the device.
• The TPM’s dictionary attack mechanism protects PIN values to use a certificate.
-| Virtual Smart Card | • Achieve security similar to that of physical smart cards without deploying physical smart cards or card readers.|
-| Windows Hello for Business | • Credentials provisioned on a device cannot be copied elsewhere.
• Confirm a device’s TPM before credentials are provisioned. |
-| BitLocker Drive Encryption | • Multiple options are available for enterprises to protect data at rest while balancing security requirements with different device hardware.
-|Device Encryption | • With a Microsoft account and the right hardware, consumers’ devices seamlessly benefit from data-at-rest protection.
-| Measured Boot | • A hardware root of trust contains boot measurements that help detect malware during remote attestation.
-| Health Attestation | • MDM solutions can easily perform remote attestation and evaluate client health before granting access to resources or cloud services such as Office 365.
-| Credential Guard | • Defense in depth increases so that even if malware has administrative rights on one machine, it is significantly more difficult to compromise additional machines in an organization.
+| Platform Crypto Provider |