- Initialize the log at the start of ipmi_main() to allow for proper
logging at the start;
- Remove the unused log_level_get() function;
- Update log_level_set() to take verbosity instead of log level
(default verbosity is 0, which is LOG_NOTICE log level),
use the function to update log level as `-v` is encountered
in command line;
- Move IANA PEN list debugging to verbosity 6. The list is too long
to see it in each debug output of verbosity 5 that is used for
debugging lan/lanplus packets;
- For verbosity >= 2 (that is `-vv`) add the ipmitool version
information at the start.
Signed-off-by: Alexander Amelkin <alexander@amelkin.msk.ru>
Simplified target "rpm" of Makefile, and removed rpmrc and rpmmacros to use
default settings and those from the spec file such as Distribution that has
been changed to "GitHub Build" instead of "Sourceforge Build".
Signed-off-by: Gilles Buloz <gilles.buloz@kontron.com>
The command "make rpm" was failing for the following reasons :
- setting the build directory to ./rpmbuild/ instead of default
~/rpmbuild/ was ignored.
- errors in the spec file : wrong dates and characters in the
changelog, and unpackaged files under misc/*
- debug package built even if unneeded but failing to build because
of missing requisites.
Using "rpmbuild -tb ipmitool-*.tar.gz" instead of 'make rpm" builds
under ~/rpmbuild/ but also fails because of the last two reasons.
Signed-off-by: Gilles Buloz <gilles.buloz@kontron.com>
The documentation now contains instructions on how to build on
Windows. The instructions have been verified and added to
a continous integration workflow with the previous commit,
so Windows buildability will from now on be automatically verified.
Resolves: ipmitool/ipmitool#148 (ipmitool for win with FreeIPMI)
ipmitool/ipmitool#200 (windows build error)
ipmitool/ipmitool#201 (windows build error)
ipmitool/ipmitool#203 (no lanplus on windows)
Signed-off-by: Alexander Amelkin <alexander@amelkin.msk.ru>
Update according to the new GitHub CI build configuration.
Add information regarding prerequisites for macOS X 10.15.
Signed-off-by: Alexander Amelkin <alexander@amelkin.msk.ru>
Neither of these systems have the `-t` option for `install`.
For Linux the option is not necessary and is only needed
if the target directory is specified before the source file(s).
Also, macOS produces strange files with -e suffix for man
pages when they are processed with sed using AC_CONFIG_FILES().
Move prefix expansion to another point in code to avoid these
unneeded intermediate files produced by configure.
Resolves: ipmitool/ipmitool#206
Signed-off-by: Alexander Amelkin <alexander@amelkin.msk.ru>
The `make distcheck` was failing because of some files deleted twice
and some intermediate files not deleted at all.
Signed-off-by: Alexander Amelkin <alexander@amelkin.msk.ru>
Remove a bashims from configure to make build compatible
with systems without bash.
Resolvesipmitool/ipmitool#205
Signed-off-by: Alexander Amelkin <alexander@amelkin.msk.ru>
Unify the comparison idioms use.
Always use `if(!strcmp())` for "if string equals"
and `if(strcmp())` for "if string is not equal".
Never use `== 0` and `!= 0` with `strcmp()`.
Minor reformatting of the code immediately surrounding the
refactored lines.
Resolvesipmitool/ipmitool#104
Signed-off-by: Alexander Amelkin <alexander@amelkin.msk.ru>
Reduce code duplication by extracting option names, types,
and value ranges into a separate structure, and rewriting
the option parsing code without mixing it with the data.
Signed-off-by: Alexander Amelkin <alexander@amelkin.msk.ru>
Clean up use of strcmp/strncmp/strncasecmp for command line arguments.
Never use anything but `strcmp()` unless absolutely neccessary.
Partialy resolvesipmitool/ipmitool#104
The current behavior:
- correct date format is not accepted by "sel time set".
- incorrect date format that looks correct is accepted, but time is not
set correctly.
- commands like
ipmitool sel time set "11/22/2013 trash"
are accepted.
Final part of the fixes for CVE-2020-5208, see
https://github.com/ipmitool/ipmitool/security/advisories/GHSA-g659-9qxw-p7cp
9 variants of stack buffer overflow when parsing `id_string` field of
SDR records returned from `CMD_GET_SDR` command.
SDR record structs have an `id_code` field, and an `id_string` `char`
array.
The length of `id_string` is calculated as `(id_code & 0x1f) + 1`,
which can be larger than expected 16 characters (if `id_code = 0xff`,
then length will be `(0xff & 0x1f) + 1 = 32`).
In numerous places, this can cause stack buffer overflow when copying
into fixed buffer of size `17` bytes from this calculated length.
Partial fix for CVE-2020-5208, see
https://github.com/ipmitool/ipmitool/security/advisories/GHSA-g659-9qxw-p7cp
The `ipmi_spd_print_fru` function has a similar issue as the one fixed
by the previous commit in `read_fru_area_section`. An initial request is
made to get the `fru.size`, which is used as the size for the allocation
of `spd_data`. Inside a loop, further requests are performed to get the
copy sizes which are not checked before being used as the size for a
copy into the buffer.
Partial fix for CVE-2020-5208, see
https://github.com/ipmitool/ipmitool/security/advisories/GHSA-g659-9qxw-p7cp
The `read_fru_area_section` function only performs size validation of
requested read size, and falsely assumes that the IPMI message will not
respond with more than the requested amount of data; it uses the
unvalidated response size to copy into `frubuf`. If the response is
larger than the request, this can result in overflowing the buffer.
The same issue affects the `read_fru_area` function.
Fix ipmitool not writing the last block of boot mailbox data if the
block is shorter than 3 bytes.
Signed-off-by: Ivan Mikhaylov <fr0st61te@gmail.com>
Signed-off-by: Alexander Amelkin <alexander@amelkin.msk.ru>
Libraries ncurses, curses, tinfo and termcap are not actually
needed as the tgetent() function listed as required is not actually
used anywhere in the code.
Signed-off-by: Alexander Amelkin <alexander@amelkin.msk.ru>
The `sudo` was missing from `make install` which prevented installation
if build is performed, as it should be, by an unpriviliged user.
Signed-off-by: Alexander Amelkin <alexander@amelkin.msk.ru>
Add some documenation on packages to install on Ubuntu 16.04 and
Fedora 31 before building the software.
This will make it easier for people who are building ipmitool as they
won't need to figure out all the package dependencies on their own.
For parameter checking replace calls to strncmp() with calls
to strcmp() in order to improve readability and get rid of literal
string lengths.
Signed-off-by: Alexander Amelkin <alexander@amelkin.msk.ru>
* Get rid of magic '8' in bootdev options processing.
* Optimize the code of bootdev arguments processing, remove the
special crafting of flags for 'clear-cmos' argument, make it use
the same code as other options.
Signed-off-by: Alexander Amelkin <alexander@amelkin.msk.ru>
There was a wrong help message regarding the console redirection,
and also the help formatting was a bit off. Straightened this all up.
Signed-off-by: Alexander Amelkin <alexander@amelkin.msk.ru>
Refactor the boot flags decoder:
* Add macros for boot flag bits, replace magic numbers in
the `chassis bootparam get 5` and in `chassis bootdev`
handlers.
The macros are prefixed with BFx_ where x stands for the
boot flags data byte as per IPMI 2.0 specification Table 28-14;
* Add decoding of remote/redirected media boot flags;
* Remove erroneous decoding of boot flags byte 3 bit 1 as
Sleep button lockout whereas the bit is a part of console
redirection setting;
* Fix console redirection settings reported under the 'BIOS verbosity'
header and vice versa;
* Fix resetting of all other boot flags in the data byte when
setting any of the bits in the same byte. This fixes inability
to set both 'efiboot' and 'persistent' bits at the same time,
and other similar cases.
Resolvesipmitool/ipmitool#163
Signed-off-by: Alexander Amelkin <alexander@amelkin.msk.ru>
ftp://ftp.supermicro.com/utility/IPMICFG/IPMICFG_1.30.0_build.190710.zip
contains MBType.dat file that lists all known Supermicro product IDs
with their respective names.
Import that knowledge into ipmitool.
Resolvesipmitool/ipmitool#151
Signed-off-by: Alexander Amelkin <alexander@amelkin.msk.ru>
Commit 6e2b688e introduced a bug due to which VLAN id range checking
was negated and resulted in error messages printed for correct VLAN ids.
Resolvesipmitool/ipmitool#55
Signed-off-by: Alexander Amelkin <alexander@amelkin.msk.ru>
Document password length argument to "set password", as per usage info.
Since we don't check whether we're using IPMI1.5/2.0 when setting the
password, ipmitool can't reject 20-char passwords being sent to
16-char interfaces, so the behaviour is somewhat undefined.
For 20-chars, it's now clearer and long passwords will be rejected.
Man page changed to reflect the above.
No longer truncate passwords (16 < p <= 20) silently, instead attempt
to set a 20-char password when such a password is given.
Fail if an explicit length is exceeded, and any time the upper limit
is exceeded.
