FRU board mfg. date uses a different value for 'unspecified'
timestamp than the general IPMI specification.
This commit makes ekanalyzer and fru commands process unspecified
FRU dates properly, displaying 'Unspecified' instead of
'Mon Jan 1 03:00:00 1996'.
Resolvesipmitool/ipmitool#57
Signed-off-by: Alexander Amelkin <alexander@amelkin.msk.ru>
Several functions were passed a struct ipmi_intf* even though it was
unused. This removes the unused parameters and changes calls and
signatures.
Partially resolvesipmitool/ipmitool#13
Signed-off-by: Vernon Mauery <vernon.mauery@intel.com>
Before this fix `ipmitool` would complain that VLAN ID
is out of range when trying to disable an already disabled VLAN
on a lan channel. With this fix it will properly report that
VLAN is already disabled.
Resolvesipmitool/ipmitool#55
Signed-off-by: Alexander Amelkin <alexander@amelkin.msk.ru>
There is a bug in gcc since 4.3.2 and still not fixed in 8.1.0.
Even if __attribute__((format(strftime... is specified for a
wrapper function around strftime, gcc still complains about strftime
being called from the wrapper with a "non-literal" format argument.
See https://gcc.gnu.org/bugzilla/show_bug.cgi?id=39438
This commit adds 'ugly hacks' from that discussion to call strftime()
from strftime-formatted wrappers and silence the warnings.
Partially resolvesipmitool/ipmitool#23
Signed-off-by: Alexander Amelkin <alexander@amelkin.msk.ru>
Handle all date/time stamps uniformly, taking in account the host
endianness. Respect the local time zone and the '-Z' option for
all ipmitool commands. Unify the date and time formatting.
Add correct handling of IPMI timestamps 'since system startup'
and for 'unspecified' timestamps.
Partially resolvesipmitool/ipmitool#23
Signed-off-by: Alexander Amelkin <alexander@amelkin.msk.ru>
Some minor formatting corrections.
Also introduced a new helper function to reduce nesting level.
Signed-off-by: Alexander Amelkin <alexander@amelkin.msk.ru>
Based on current crypto alogrithms, one could rank cipher suites along
these lines:
17 > 3 >> all the rest
17 and 3 are the only cipher suites that implement any sort of
confidentiality alogorithm that is secure. In addition, any hmac-md5 or
md5 integrity algorithm used in integrity is weak at best and dangerous
for authentication.
This could possibly be enabled in a simpler mechanism by simply checking
for 17 and then choosing it before falling back to 3, but the way this
is implemented, it makes it easy to change the list of acceptable
algorithms from two to three or more items.
Resolvesipmitool/ipmitool#29
Signed-off-by: Vernon Mauery <vernon.mauery@intel.com>
With this commit the GUID encoding is now by default detected
automatically based on the validity of the version field,
and the timestamp (for time-based version 1 GUIDs).
The version is considered valid if it is 1 through 5.
The timestamp is considered valid if the year is past UNIX Epoch
and before the current year.
Resolvesipmitool/ipmitool#25
Signed-off-by: Alexander Amelkin <alexander@amelkin.msk.ru>
Before this commit the 'Timestamp' line was always printed
for all versions of GUID, even for non-time-based ones.
Plus, only the time_low field was used, and it was used as if
it contained seconds since UNIX Epoch, which it didn't. In fact
this field along with other time_* fields constitute a single
60-bit value representing the count of 100ns intervals since
adoption of Gregorial calendar (00:00:00.00 15 Oct 1582).
For non-time-based versions of GUID, the time_* fields do
not represent any time at all.
So, after this commit, the timestamp will be properly decoded
for time-based GUID version 1 only. For other versions the
'Timestamp' line will not be displayed. A line showing the
GUID version will be added to the output.
Partially resolvesipmitool/ipmitool#25
Signed-off-by: Alexander Amelkin <alexander@amelkin.msk.ru>
There are lots of BMC implementations that violate the IPMI
specification in regard to GUID encoding and instead encode
GUIDs according to either RFC4122 or SMBIOS specifications.
This commit restores the default behavior of `mc guid` to
SMBIOS-based decoding and adds options to allow for decoding
according to IPMI or RFC4122 specifications.
It also allows to simply dump the received GUID as is
without any parsing.
It is possible that in future versions `ipmitool` will
change default behavior to 'ipmi' instead of 'smbios'.
Partially resolvesipmitool/ipmitool#25
Signed-off-by: Alexander Amelkin <alexander@amelkin.msk.ru>
Before this commit the bytes for the GUID 'node' part were displayed in
reverse order as if they were reported by BMC according to SMBIOS
specification, not accordint to IPMI.
The field order in guid_t was also specified according to RFC4122/SMBIOS,
which is the reverse of IPMI specification. It has now been fixed.
The time_low field of GUID was taken directly, without taking in
account the ipmitool host endianness. It is now properly converted
from IPMI little-endian to host byte order. Other GUID fields are
also properly converted now. As of now, ipmitool does not generally work
properly when built for a big-endian target, but that's out of scope
of this commit.
Please note that this commit most probably breaks the output of
`ipmitool mc guid` with most existing BMC implementations, but that's
just an indication of them being broken. A follow-up commit will
re-add support for the broken behavior.
Partially resolvesipmitool/ipmitool#25
Signed-off-by: Alexander Amelkin <alexander@amelkin.msk.ru>
Add ARRAY_SIZE() macro.
Use the new macro in all places where array size is calculated by
means of sizeof(array)/sizeof(array[0]).
Fix minor bugs and warnings in the affected code.
Signed-off-by: Alexander Amelkin <alexander@amelkin.msk.ru>
Get rid of lanplus-specific yet very generic in nature
lanplus_swap() function that unconditionally swaps bytes
in an arbitrary byte array. Move it to helper module and
add two conditionally working interfaces to it:
- array_ntoh() for network (BE) to host conversion, and
- array_letoh() for ipmi (LE) to host conversion.
The added functions will only perform byte swapping if
the target architecture differs in endianness from the
data source. array_ntoh() will only do swap on LE machines,
while array_letoh() will only do it on BE ones.
These functions are introduced for future use in other
places of ipmitool.
Partially resolvesipmitool/ipmitool#26
Signed-off-by: Alexander Amelkin <alexander@amelkin.msk.ru>
Commit 249e0929 added extra conditionals in byteswapping functions.
They are not needed and didn't work properly.
Now those functions must finally be ok.
Signed-off-by: Alexander Amelkin <alexander@amelkin.msk.ru>
A potential future problem has been identified in the manufacturer
ID processing code for `mc info` command. Only 16 of 24 bits were
used. This is fixed now.
Also added support for ID 0x0FFFFF, the 'reserved' value as per
IPMI specification. It is now reported as 'Unspecified' unlike other
non-listed IDs that are still reported as 'Unknown'.
ID 0xFFFFFE is used for debugging purposes in hope that IANA won't
reach that number of entities any soon. If it will though, then
IANA's assignment will take precedence.
Signed-off-by: Alexander Amelkin <alexander@amelkin.msk.ru>
ipmiXXtoh() and htoipmiXX() functions were broken
and only worked properly for big-endian hosts.
This commit makes them endianness-independent.
Signed-off-by: Alexander Amelkin <alexander@amelkin.msk.ru>
Added an option -Z to display all dates in UTC.
Resolvesipmitool/ipmitool#19
Change-Id: Iac3a61190eefde12d95c892af26072ec01f60474
Signed-off-by: Nagaraju Goruganti <ngorugan@in.ibm.com>
Signed-off-by: Nagaraju Goruganti <ngorugan@in.ibm.com>
* Replace with a macro all calls to val2str() for completion codes
* Replace with a macro all calls to val2str() for manufacturer name
* Replace with a macro all calls to val2str() for product name
* Add ipmi24toh() and ipmi32toh() helpers, unify ipmi*toh() interface
Signed-off-by: Alexander Amelkin <alexander@amelkin.msk.ru>
* Add output of "don't log" and "pre-timeout interrupt" fields
* Display timers with 100ms precision
* List timer use expiration flags as text, not just numerically
Signed-off-by: Alexander Amelkin <alexander@amelkin.msk.ru>
Add `ipmitool mc watchdog set` command in full compliance
with IPMI spec 2.0 section 27.6. Setting of all fields
is fully supported.
Signed-off-by: Alexander Amelkin <alexander@amelkin.msk.ru>
In multiple places throughout ipmi_user.c a user id mask
was used as a magic number, in some places the mask was wrong.
This commit replaces all those magic numbers with a single
IPMI_UID() macro.
Resolvesipmitool/ipmitool#6
Got rid of the field decoding code that was only capable of
processing ASCII and binary fields, and switched to using
get_fru_area_str() that can also decode BCDplus and 6-bit ASCII
and maybe will eventually be enabled to decode Unicode text
as well.
This is the first step to completely get rid of the completely
awfully written FRU data decoding functionality of ekanalyzer
that essentially duplicates that of ipmi_fru.c module.
Commit implements `Enable status` which shows/is in alignment with (22.27) Get
User Access Command and displays User ID Enable/Disable status of given User ID
at given channel.
PICMG 3.1 R2.0 introduces new a new Link Class field in the FRU
Link Descriptors which is the upper 4 bits of the Link Type field.
This new Link Class field specifies SERDES lanes with 10.3125Gbd
signalling rate.
It also introduces the new Base-KX and Base-KX4 types which are the
new IEEE replacements for the PICMG 3.0 Base-BX and Base-BX4 types.
This patch decodes these new types and fields and will print out
proper descriptions for each one based on PICMG 3.1 R2.0
Commit adds support for cipher suites 6/7/8 (HMAC-MD5) and cipher
suites 15/16/17 (HMAC_SHA256).
This also fixes:
* ID:442 - IPMI_AUTH_RAKP_HMAC_MD5 support in lanplus
* ID:141 - RMCP+ Cipher-suite 17 not supported
Original author Liebig Holger(Fujitsu).
Code cleanup done by Florian Breu and Zdenek Styblik.
Reworked event type code/sensor type parsing in order to support
VITA-specific extensions. Added VITA-specific sensor-specific event
types and VITA-specific sensor types.
Commit re-works user interface of PEF module as well as internal functions.
Not all of the functionality is implemented as the main aim was interface
layout.
It's possible this commit introduces some breaking changes.
Changes are based on patch submitted by Jordan Hargrave, Dell Inc.
