Before this commit the bytes for the GUID 'node' part were displayed in
reverse order as if they were reported by BMC according to SMBIOS
specification, not accordint to IPMI.
The field order in guid_t was also specified according to RFC4122/SMBIOS,
which is the reverse of IPMI specification. It has now been fixed.
The time_low field of GUID was taken directly, without taking in
account the ipmitool host endianness. It is now properly converted
from IPMI little-endian to host byte order. Other GUID fields are
also properly converted now. As of now, ipmitool does not generally work
properly when built for a big-endian target, but that's out of scope
of this commit.
Please note that this commit most probably breaks the output of
`ipmitool mc guid` with most existing BMC implementations, but that's
just an indication of them being broken. A follow-up commit will
re-add support for the broken behavior.
Partially resolvesipmitool/ipmitool#25
Signed-off-by: Alexander Amelkin <alexander@amelkin.msk.ru>
Add ARRAY_SIZE() macro.
Use the new macro in all places where array size is calculated by
means of sizeof(array)/sizeof(array[0]).
Fix minor bugs and warnings in the affected code.
Signed-off-by: Alexander Amelkin <alexander@amelkin.msk.ru>
Get rid of lanplus-specific yet very generic in nature
lanplus_swap() function that unconditionally swaps bytes
in an arbitrary byte array. Move it to helper module and
add two conditionally working interfaces to it:
- array_ntoh() for network (BE) to host conversion, and
- array_letoh() for ipmi (LE) to host conversion.
The added functions will only perform byte swapping if
the target architecture differs in endianness from the
data source. array_ntoh() will only do swap on LE machines,
while array_letoh() will only do it on BE ones.
These functions are introduced for future use in other
places of ipmitool.
Partially resolvesipmitool/ipmitool#26
Signed-off-by: Alexander Amelkin <alexander@amelkin.msk.ru>
Commit 249e0929 added extra conditionals in byteswapping functions.
They are not needed and didn't work properly.
Now those functions must finally be ok.
Signed-off-by: Alexander Amelkin <alexander@amelkin.msk.ru>
A potential future problem has been identified in the manufacturer
ID processing code for `mc info` command. Only 16 of 24 bits were
used. This is fixed now.
Also added support for ID 0x0FFFFF, the 'reserved' value as per
IPMI specification. It is now reported as 'Unspecified' unlike other
non-listed IDs that are still reported as 'Unknown'.
ID 0xFFFFFE is used for debugging purposes in hope that IANA won't
reach that number of entities any soon. If it will though, then
IANA's assignment will take precedence.
Signed-off-by: Alexander Amelkin <alexander@amelkin.msk.ru>
ipmiXXtoh() and htoipmiXX() functions were broken
and only worked properly for big-endian hosts.
This commit makes them endianness-independent.
Signed-off-by: Alexander Amelkin <alexander@amelkin.msk.ru>
Added an option -Z to display all dates in UTC.
Resolvesipmitool/ipmitool#19
Change-Id: Iac3a61190eefde12d95c892af26072ec01f60474
Signed-off-by: Nagaraju Goruganti <ngorugan@in.ibm.com>
Signed-off-by: Nagaraju Goruganti <ngorugan@in.ibm.com>
* Replace with a macro all calls to val2str() for completion codes
* Replace with a macro all calls to val2str() for manufacturer name
* Replace with a macro all calls to val2str() for product name
* Add ipmi24toh() and ipmi32toh() helpers, unify ipmi*toh() interface
Signed-off-by: Alexander Amelkin <alexander@amelkin.msk.ru>
* Add output of "don't log" and "pre-timeout interrupt" fields
* Display timers with 100ms precision
* List timer use expiration flags as text, not just numerically
Signed-off-by: Alexander Amelkin <alexander@amelkin.msk.ru>
Add `ipmitool mc watchdog set` command in full compliance
with IPMI spec 2.0 section 27.6. Setting of all fields
is fully supported.
Signed-off-by: Alexander Amelkin <alexander@amelkin.msk.ru>
In multiple places throughout ipmi_user.c a user id mask
was used as a magic number, in some places the mask was wrong.
This commit replaces all those magic numbers with a single
IPMI_UID() macro.
Resolvesipmitool/ipmitool#6
Got rid of the field decoding code that was only capable of
processing ASCII and binary fields, and switched to using
get_fru_area_str() that can also decode BCDplus and 6-bit ASCII
and maybe will eventually be enabled to decode Unicode text
as well.
This is the first step to completely get rid of the completely
awfully written FRU data decoding functionality of ekanalyzer
that essentially duplicates that of ipmi_fru.c module.
Commit implements `Enable status` which shows/is in alignment with (22.27) Get
User Access Command and displays User ID Enable/Disable status of given User ID
at given channel.
PICMG 3.1 R2.0 introduces new a new Link Class field in the FRU
Link Descriptors which is the upper 4 bits of the Link Type field.
This new Link Class field specifies SERDES lanes with 10.3125Gbd
signalling rate.
It also introduces the new Base-KX and Base-KX4 types which are the
new IEEE replacements for the PICMG 3.0 Base-BX and Base-BX4 types.
This patch decodes these new types and fields and will print out
proper descriptions for each one based on PICMG 3.1 R2.0
Commit adds support for cipher suites 6/7/8 (HMAC-MD5) and cipher
suites 15/16/17 (HMAC_SHA256).
This also fixes:
* ID:442 - IPMI_AUTH_RAKP_HMAC_MD5 support in lanplus
* ID:141 - RMCP+ Cipher-suite 17 not supported
Original author Liebig Holger(Fujitsu).
Code cleanup done by Florian Breu and Zdenek Styblik.
Reworked event type code/sensor type parsing in order to support
VITA-specific extensions. Added VITA-specific sensor-specific event
types and VITA-specific sensor types.
Commit re-works user interface of PEF module as well as internal functions.
Not all of the functionality is implemented as the main aim was interface
layout.
It's possible this commit introduces some breaking changes.
Changes are based on patch submitted by Jordan Hargrave, Dell Inc.
Commit moves Super Micro stuff into dedicated header file in order to cut down
on compiler warnings. It seems these aren't used elsewhere other than in
'lib/ipmi_sel.c'.
Commit implements '-4' and '-6' switch in order to enforce IPv4 or IPv6
connection. In order to do so, struct ipmi_intf has been extended to carry
ai_family flag.
