mirror of
https://github.com/pimox/pimox7.git
synced 2026-06-28 16:51:38 +00:00
41 lines
1.5 KiB
Markdown
41 lines
1.5 KiB
Markdown
Pimox - Proxmox V7 for the Raspberry Pi
|
|
===
|
|
|
|
Pimox is a port of Proxmox to the Raspberry Pi allowing you to build a Proxmox cluster of Rapberry Pi's or even a hybrid cluster of Pis and x86 hardware.
|
|
|
|
Requirements
|
|
---
|
|
* Raspberry Pi 4
|
|
* Pre-installed Debian __Bullseye__ based ___64-bit___ OS (not 32bit)
|
|
|
|
Prechecks
|
|
---
|
|
1. In /etc/network/interfaces, give the Pi a static IP address. You cannot use dhcp.
|
|
2. In /etc/network/interfaces, remove any IPv6 addresses.
|
|
3. In /etc/hostname, make sure the Pi has a name.
|
|
4. In /etc/hosts, make sure this hostname corresponds to the static IP you previous set.
|
|
|
|
Install
|
|
---
|
|
1. Do this at the console, not over a network. The network will be reconfigured as part of the install.
|
|
2. sudo -s
|
|
3. curl https://raw.githubusercontent.com/pimox/pimox7/master/pimox.sh | sh
|
|
|
|
RPiOS64 autoinstall
|
|
---
|
|
0. Flash and startup the latest image from https://downloads.raspberrypi.org/raspios_arm64/ .
|
|
1. sudo -s
|
|
2. curl https://raw.githubusercontent.com/TuxfeatMac/pimox7/master/RPiOS64autoinstall.sh > RPiOS64autoinstall.sh
|
|
3. nano RPiOS64autoinstall.sh
|
|
5. Adjust network and hostname settings.
|
|
6. chmod +x RPiOS64autoinstall.sh
|
|
7. ./RPiOS64autoinstall.sh
|
|
8. Type a new root password.
|
|
9. Retype new password.
|
|
10. Do __not__ touch it untill, reboot is done.
|
|
|
|
Notes
|
|
---
|
|
1. This repo just contains the precompiled debian packages. The original Proxmox sources can be found at https://git.proxmox.com
|
|
2. The (very minimally) patched sources to rebuild this can be found at https://github.com/pimox
|