windows-itpro-docs/windows/configuration/wcd/wcd-calling.md

title, description, ms.prod, ms.mktglfcycl, ms.sitesec, author, ms.localizationpriority, ms.author, ms.date

title	description	ms.prod	ms.mktglfcycl	ms.sitesec	author	ms.localizationpriority	ms.author	ms.date
Calling (Windows 10)	This section describes the Calling settings that you can configure in provisioning packages for Windows 10 using Windows Configuration Designer.	w10	deploy	library	jdeckerMS	medium	jdecker	09/21/2017

Calling (Windows Configuration Designer reference)

Use to configure settings for Calling.

Important

These settings are intended to be used only by manufacturers, mobile operators, and solution providers when configuring devices, and are not intended for use by administrators in the enterprise.

Applies to

Setting groups	Desktop editions	Mobile editions	Surface Hub	HoloLens	IoT Core
All settings		X

Branding

See Branding for phone calls.

PartnerAppSupport

See Dialer codes to launch diagnostic applications.

PerSimSettings

Use to configure settings for each subscriber identification module (SIM) card. Enter the Integrated Circuit Card Identifier (ICCID) for the SIM card, click Add, and then configure the folowing settings.

Critical

Setting	Description
MOSimFallbackVoicemailNumber	Partners who do not have the voicemail numbers on the device SIM can configure the voicemail number for their devices. If the voicemail number is not on the SIM and the registry key is not set, the default voicemail will not be set and the user will need to set the number. Set MOSimFallbackVoicemailNumber to the voicemail number that you want to use for the phone.
SimOverrideVoicemailNumber	Mobile operators can override the voicemail number on the UICC with a different voicemail number that is configured in the registry. Set SimOverrideVoicemailNumber to a string that contains the digits of the voicemail number to use instead of the voicemail number on the UICC.

General

Setting	Description
AllowVideoConferencing	Set as True to enable the ability to conference video calls.
DefaultCallerIdSetting	Configure the default setting for caller ID. Select between No one, Only contacts, Every one, and Network default. If set to Network default, set ShowCallerIdNetworkDefaultSetting to True.
DefaultEnableVideoCalling	Set as True to enable LTE video calling as the default setting.
IgnoreMWINotifications	Set as True to configure the voicemail system so the phone ignores message waiting indicator (MWI) notifications.
IgnoreUssdExclusions	Set as True to ignore Unstructured Supplementary Service Data (USSD) exclusions.
ResetCallForwarding	When set to True, user is provided with an option to retry call forwarding settings query.
ShowCallerIdNetworkDefaultSetting	Indicates whether the network default setting can be allowed for outgoing caller ID.
ShowVideoCallingSwitch	Use to specify whether to show the video capability sharing switch on the mobile device's Settings screen.
SupressVideoCallingChargesDialog	Configure the phone settings CPL to supress the video calling charges dialog.
UssdExclusionList	List used to exclude predefined USSD entries, allowing the number to be sent as standard DTMF tones instead. Set UssdExclusionList to the list of desired exclusions, separated by semicolons. For example, setting the value to 66;330 will override 66 and 330. Leading zeros are specified by using F. For example, to override code 079, set the value to F79. If you set UssdExclusionList, you must set IgnoreUssdExclusions as well. Otherwise, the list will be ignored. See List of USSD codes for values.
WiFiCallingOperatorName	Enter the operator name to be shown when the phone is using WiFi calling. If you don't set a value for WiFiCallingOperatorName, the device will always display SIMServiceProviderName Wi-Fi, where SIMServiceProviderName is a string that corresponds to the SPN for the SIM on the device. If the service provider name in the SIM is not set, only Wi-Fi will be displayed.

PhoneSettings

Setting	Description
AssistedDialSetting	Turn off the international assist feature that helps users with the country codes needed for dialing international phone numbers.
CallIDMatch	Sets the number of digits that the OS will try to match against contacts for Caller ID. For any country/region that doesn't exist in the default mapping table, mobile operators can use this legacy CallIDMatch setting to specify the minimum number of digits to use for matching caller ID.
ContinuousDTMFEnabled	Enable DTMF tone duration for as long as the user presses a dialpad key.
DisableVoicemailPhoneNumberDisplay	Disable the display of the voicemail phone number below the Voicemail label in call progress dialog.
HideCallForwarding	Partners can hide the user option to turn on call forwarding. By default, users can decide whether to turn on call forwarding. Partners can hide this user option so that call forwarding is permanently disabled.
ShowLongTones	Partners can make a user option visible that makes it possible to toggle between short and long DTMF tones, instead of the default continuous tones. By default, the phone supports Dual-Tone Multi-frequency (DTMF) with continuous tones. Partners can make a user option visible that makes it possible to toggle between short and long tones instead.
UseOKForUssdDialogs	OEMs can change the button label in USSD dialogs from Close (the default) to OK.
VoLTEAudioQualityString	Partners can add a string to the call progress screen to indicate if the active call is a high quality voice over LTE (VoLTE). Set the value of VoLTEAudioQualityString to the string that you want to display in the call progress screen to indicate that the call is a VoLTE call. This string is combined with the PLMN so if the string is "VoLTE", the resulting string is "PLMN_String VoLTE". For example, the string displayed in the call progress screen can be "Litware VoLTE" if the PLMN_String is "Litware". The value you specify for VoLTEAudioQualityString must exceed 10 characters.

SupplementaryServiceCodeOverrides

See Dialer codes for supplementary services.

VoicemailRegistrationTable

Configure these settings to customize visual voicemail in the Windows 10 Mobile UI. For settings and values, see Visual voicemail.

List of USSD codes

Codes	Description	DWORD Value
04	CHANGEPIN	000000F4
042	CHANGEPIN2	00000F42
05	UNBLOCKPIN	000000F5
052	UNBLOCKPIN2	00000F52
03	SSCHANGEPASSWORD	000000F3
75	EMLPPBASE	00000075
750	EMLPPLEVEL0	00000750
751	EMLPPLEVEL1	00000751
752	EMLPPLEVEL2	00000752
753	EMLPPLEVEL3	00000753
754	EMLPPLEVEL4	00000754
66	CALLDEFLECT	00000066
30	CALLIDCLIP	00000030
31	CALLIDCLIR	00000031
76	CALLIDCOLP	00000076
77	CALLIDCOLR	00000077
21	FWDUNCONDITIONAL	00000021
67	FWDBUSY	00000067
61	FWDNOREPLY	00000061
62	FWDNOTREACHABLE	00000062
002	FWDALL	00000FF2
004	FWDALLCONDITIONAL	00000FF4
43	CALLWAITING	00000043
360	UUSALL	00000360
361	UUSSERVICE1	00000361
362	UUSSERVICE2	00000362
363	UUSSERVICE3	00000363
33	BARROUT	00000033
331	BARROUTINTL	00000331
332	BARROUTINTLEXTOHOME	00000332
35	BARRIN	00000035
351	BARRINROAM	00000351
330	BARRALL	00000330
333	BARRALLOUT	00000333
353	BARRALLIN	00000353
354	BARRINCOMINGINTERMEDIATE	00000354
96	CALLTRANSFER	00000096
37	CALLCOMPLETEBUSY	00000037
070	PNP0	00000F70
071	PNP1	00000F71
072	PNP2	00000F72
073	PNP3	00000F73
074	PNP4	00000F74
075	PNP5	00000F75
076	PNP6	00000F76
077	PNP7	00000F77
078	PNP8	00000F78
079	PNP9	00000F79
300	CALLCNAP	00000300
591	MSP1	00000591
592	MSP2	00000592
593	MSP3	00000593
594	MSP4	00000594