windows-itpro-docs/devices/surface-hub/surface-hub-2s-unpack.md

title, description, keywords, ms.prod, ms.sitesec, author, ms.author, audience, ms.topic, ms.localizationpriority

title	description	keywords	ms.prod	ms.sitesec	author	ms.author	audience	ms.topic	ms.localizationpriority
Unpack Surface Hub 2S	This page includes information about safely unpacking Surface Hub 2S.	separate values with commas	surface-hub	library	robmazz	robmazz	Admin	article	Normal

Unpack Surface Hub 2S

Before you remove Surface Hub 2S from the box, make sure you have your mounting solution assembled and someone available to help you.

1. Use the handles on each side of the box to move it to the space where you'll set it up.
2. Before opening, remove the clips (4) located on the front and back, and then lift the top off the box using the handles.
3. In the base of the Surface Hub 2S, open the accessories box containing the setup guide, Surface Hub 2 pen, Surface Hub 2 camera and the power cable.
4. On the back of the surface hub there's an instructional label showing you where to attach the mounting hardware. Install them in place and remove the label.
5. If you're using a mobile stand remember to lock the wheels to keep the stand in place
6. Be sure to lift the Surface Hub 2S with both hands and support the bottom of the device.
7. Align the installed hardware with the slots on the mount so it rests firmly in place.
8. Follow any further instructions that came with your mounting solution.

Install pen and camera**

1. Unwrap your Surface Hub 2 pen and attach it magnetically to your preferred side of the device.
2. Remove the lens cling from the camera and attach it to the USB-C port on the top of the Surface Hub 2S.
3. Insert the power cable into the back of the device and plug it into a power outlet. Run the cable through any cable guides on your mounting solution and remove the screen clang.
4. To begin, press the power button on the bottom right.