This commit was manufactured by cvs2svn to create tag 'IPMITOOL_1_8_7'.

add additional debug messages

ipmitool/AUTHORS

@@ -0,0 +1,4 @@
+Duncan Laurie <duncan@iceblink.org>
+Fredrik <20>hrn <ohrn@chl.chalmers.se>
+Jon Cassorla <jon.cassorla@newisys.com>
+Jeremy Ellington <jeremy@jeremye.net>

ipmitool/COPYING

@@ -28,6 +28,3 @@ PUNITIVE DAMAGES, HOWEVER CAUSED AND REGARDLESS OF THE THEORY OF
 LIABILITY, ARISING OUT OF THE USE OF OR INABILITY TO USE THIS SOFTWARE,
 EVEN IF SUN HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
 
-You acknowledge that this software is not designed or intended for use
-in the design, construction, operation or maintenance of any nuclear
-facility.

ipmitool/ChangeLog

@@ -0,0 +1,159 @@
+version 1.8.7
+	* Remove nuclear clause from license
+	* Add Sun OEM command for blades
+	* Increase argument size for raw commands in shell/exec
+	* Fix handling of LUNs for LAN interfaces
+	* Add IPMIv2 SOL loopback test
+	* Add support for IBM OEM SEL messages
+	* Disable file paranoia checks on read files by default
+	* Support IPMIv2 SOL on older Intel boxes
+	* Display message and exit if keepalive fails during SOL
+	* Add support for setting VLAN id and priority
+	* Add support for FreeBSD OpenIPMI-compatible driver
+	* Add support for IPMIv2 Firmware Firewall
+	* Fix gcc4 compile warnings
+	* Make ipmievd generate pidfile
+	* Add initscripts for ipmievd
+
+version 1.8.6
+	* Fix memory corruption when sending encrypted SOL traffic
+	* Add keepalive timer to IPMIv2 SOL sessions
+
+version 1.8.5
+	* Add support for settable SOL escape character with -e option
+	* Add support for Kg BMC key for IPMIv2 authentication with -k option
+	* Add support for Tyan IPMIv1.5 SOL with tsol command
+	* Add support for PICMG devices
+	* Add support for OEM SEL event parsing
+	* Add support for command bridging over lan and lanplus interfaces
+	* New 'chassis selftest' command
+	* Many bufxies and patches from contributors
+
+version 1.8.3
+	* Add support for 'sel readraw' and 'sel writeraw' commands.
+	* Add support for entering NetFn as a string for RAW commands.
+	* Add support for appending distro tag to integrated RPM builds.
+	* Fix LAN parameter printing to handle Invalid Data Field response
+	without errors.
+	* Add 5ms delay to IPMIv2 SOL retry packets
+	* IPMIv2 interface will now correctly set session privilege level
+	to requested level after session is opened.
+
+version 1.8.2 (released May 18 2005)
+	* Fix FRU reading for large (>255 bytes) areas.
+	* Overhaul to ipmievd to support SEL polling in addition to OpenIPMI.
+	* Fix LAN parameter segfault when no Ciphers supported by BMC.
+	* Fix IPMIv2 support on Intel v2 BMCs (use -o intelplus).
+	* Separate option parsing code from main ipmitool source file.
+	* Add raw I2C support with IPMI Master Read-Write command.
+	* Add support for new 'sdr elist' extended output format.
+	* Add support for listing sensors by type with 'sdr type' command.
+	* Add support for new 'sel elist' extended output format that
+	  cross-references events with sensors.
+	* Add support for sending dynamically generated platform events
+	  based on existing sensor information.
+	* New '-S' argument to read local SDR cache created with 'sdr dump'.
+	* Updated manpage for ipmitool and ipmievd.
+
+version 1.8.1
+	* ipmievd installs in /usr/sbin
+
+version 1.8.0
+	* Fix IPMIv2.0 issues
+	* Fix chassis boot parameter support
+	* Add support for linear sensors
+
+version 1.7.1
+	* Update bmc plugin to work with new Solaris bmc driver (new ioctl
+	  for interface detection and new STREAMS message-based interface)
+
+version 1.7.0
+	* Propogate errors correctly so exit status will be useful
+	* More consistent display of errors including completion code text
+	* Errors and debug is send to stderr now
+	* New "sel get" command that will print details about SEL entry
+	  and corresponding SDR records as well as FRUs via entity association
+	* Improved event generator, now supports reading events from text file
+	* New "-o oemtype" option for specifying OEM boards
+	  exsting types are "supermicro" and "intelwv2"
+	* New PEF subsystem from Tim Murphy at Dell
+	* New "bmc" plugin for Solaris 10 x86
+	* Many bugfixes and contributed patches
+
+version 1.6.2
+	* Support for Supermicro BMC OEM authentication method
+
+version 1.6.1
+	* Fix minor problem with LAN parameter setting
+
+version 1.6.0
+	* Add a README file
+	* Add Solaris x86 interface plugin
+	* Add support for building Solaris packages
+	* Fix segfault when doing "sel list" (from Matthew Braithwaite)
+	* Fix "chassis identify" on some BMCs (from ebrower@sourceforge)
+	* Add command "bmc info" and related output (from ebrower@sourceforge)
+	* Add support for IPMIv2 and Serial-over-LAN from Jeremy at Newisys
+	* Add support for building RPMs as non-root user
+	* Add new "shell" and "exec" commands
+	* Lots of other contributed patches
+
+version 1.5.9
+	* Add ability to get a particular sensor by name
+	* Add ability to set a particular sensor threshold
+	* Add support for displaying V2 channel authentication levels
+	* Add README for rrdtool scripts in contrib directory
+	* Improve lan interface retry handling
+	* Support prompting for password or reading from environment
+	* Move chaninfo command into channel subcommand
+	* Fix reservation ID handling when two sessions open to BMC
+	* Fix reading of large FRU data
+	* Add configure option for changing binary to ipmiadm for Solaris
+	* Fix compile problem on Solaris 8
+
+version 1.5.8
+	* Enable static compilation of interfaces
+	* Fix types to be 64-bit safe
+	* Fix compilation problems on Solaris
+	* Fix multiple big-endian problems for Solaris/SPARC
+	* Fix channel access to save settings to NVRAM
+	* Set channel privilege limit to ADMIN during "access on"
+	* Enable gratuitous ARP in bmcautoconf.sh
+	* Add support for Linux kernel panic messages in SEL output
+	* Add support for type 3 SDR records
+
+version 1.5.7
+	* Add IPMIv1.5 eratta fixes
+	* Additions to FRU printing and FRU multirecords
+	* Better handling of SDR printing
+	* Contrib scripts for creating rrdtool graphs
+
+version 1.5.6
+	* Fix SEL event decoding for generic events
+	* Handle empty SEL gracefully when doing "sel list"
+	* Fix sdr handling of sensors that do not return a reading
+	* Fix for CSV display of sensor readings/units from Fredrik <20>hrn
+
+version 1.5.5
+	* Add -U option for setting LAN username
+	* Fix -v usage for plugin interfaces
+
+version 1.5.4
+	* Put interface plugin API into library
+	* Fix ipmievd
+
+version 1.5.3
+	* Add -g option to work with grizzly bmc
+
+version 1.5.2
+	* Add support for setting gratuitous arp interval
+
+version 1.5.1
+	* Better SEL support
+	* Fix display bug in SDR list
+
+version 1.5.0
+	* More robust UDP packet handling
+	* Add Intel IMB driver support
+	* Use autoconf/automake/libtool
+

ipmitool/Makefile.am

@@ -27,21 +27,53 @@
 # PUNITIVE DAMAGES, HOWEVER CAUSED AND REGARDLESS OF THE THEORY OF
 # LIABILITY, ARISING OUT OF THE USE OF OR INABILITY TO USE THIS SOFTWARE,
 # EVEN IF SUN HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
-# 
-# You acknowledge that this software is not designed or intended for use
-# in the design, construction, operation or maintenance of any nuclear
-# facility.
 
-EXTRA_DIST = ipmitool.spec.in debian/*
+DOCDIR = $(DESTDIR)/$(datadir)/doc/$(PACKAGE)
+DOCLIST = README COPYING AUTHORS ChangeLog
+
+EXTRA_DIST = $(DOCLIST) \
+	debian/changelog debian/control debian/copyright \
+	debian/dirs debian/docs debian/rules
+
+AUTOMAKE_OPTIONS = dist-bzip2
 
 MAINTAINERCLEANFILES = Makefile.in aclocal.m4 configure configure-stamp \
 	config.guess config.sub depcomp install-sh ltmain.sh missing \
-	mkinstalldirs config.h.in stamp-h.in $(distdir).tar.gz
+	mkinstalldirs config.h.in stamp-h.in \
+	$(distdir).tar.gz $(distdir).tar.bz2
 
-SUBDIRS = libltdl lib src include doc
+SUBDIRS = lib src include doc contrib control
 
-INCLUDES = $(LTDLINCL)
+dist-hook:
+	cp control/ipmitool.spec $(distdir)
 
-dist-hook: ipmitool.spec
-	cp ipmitool.spec $(distdir)
+install-data-local:
+	mkdir -p $(DOCDIR)
+	install -m 644 $(DOCLIST) $(DOCDIR)
+
+.PHONY: pkg
+pkg: PKG := ipmitool-@VERSION@-@OS@-@ARCH@
+pkg: control/pkginfo
+	$(STRIP) src/ipmitool
+	$(STRIP) src/ipmitool
+	(cd control ; pkgmk -o -d /tmp)
+	pkgtrans -s /tmp $(PKG) ipmitool
+	gzip -c /tmp/$(PKG) > $(PKG).gz
+	-rm -rf /tmp/ipmitool /tmp/$(PKG)
+
+BUILDDIR = ${shell cd $(top_builddir) ; pwd | sed -e 's,^[^:\\/]:[\\/],/,'}
+SRCDIR   = ${shell cd $(top_srcdir) ; pwd | sed -e 's,^[^:\\/]:[\\/],/,'}
+RPMDIR   = $(BUILDDIR)/rpmbuild
+
+.PHONY: rpm
+rpm: control/ipmitool.spec dist
+	mkdir -p $(RPMDIR)/{BUILD,RPMS,SRPMS,SOURCES,SPECS,tmp}
+	cp control/ipmitool.spec $(RPMDIR)/SPECS
+	BUILDDIR=$(RPMDIR) CONFIGDIR=$(BUILDDIR)/control \
+	  @RPMBUILD@ -ba --rcfile $(SRCDIR)/control/rpmrc \
+	  $(RPMDIR)/SPECS/ipmitool.spec
+
+.PHONY: clean-rpm
+clean-rpm:
+	-rm -rf $(RPMDIR)
 

ipmitool/README

@@ -0,0 +1,309 @@
+
+                              ipmitool
+                            Duncan Laurie
+                         duncan@iceblink.org
+
+Overview
+========
+ipmitool is a utility for managing and configuring devices that support
+the Intelligent Platform Management Interface.  IPMI is an open standard
+for monitoring, logging, recovery, inventory, and control of hardware
+that is implemented independent of the main CPU, BIOS, and OS.  The
+service processor (or Baseboard Management Controller, BMC) is the brain
+behind platform management and its primary purpose is to handle the
+autonomous sensor monitoring and event logging features.
+
+The ipmitool program provides a simple command-line interface to this BMC.
+It features the ability to read the sensor data repository (SDR) and print
+sensor values, display the contents of the System Event Log (SEL), print
+Field Replaceable Unit (FRU) inventory information, read and set LAN
+configuration parameters, and perform remote chassis power control.
+
+
+Background
+==========
+I originally wrote ipmitool while between projects and employeed at Sun
+Microsystems.  Sun had just embarked on a new line of general-purpose x86
+servers that inclued an OEM Intel board with an IPMIv1.5 BMC on board.
+It started with an idea that remote chassis power control would be a handy
+feature for my systems in the lab and from there it grew into a multi-
+purpose tool that lots of people found useful.  I decided to release it
+under a BSD license and give others the chance to make use of it.
+
+ipmitool was not written to provide large-scale (aka Enterprise) management
+application functionality.  The functionality that ipmitool proivides is
+easily accomplished by sending simple IPMI request messages and parsing
+the returned response.  It is intended to be used by system administrators
+who like the simplicity and scriptability of command-line utilities, as
+well as those debugging or developing their own BMC implementations.
+
+
+Requirements
+============
+Obviously the largest requirement is hardware with a service processor
+that supports the IPMI specification.  Many x86-based servers are now
+comming with IPMI support, check with your preferred hardware vendor
+about available prodcuts.
+
+Once you are certain you have the required hardware, you then need to
+decide how you want to access the BMC.  The most common case involve
+access through the System Interface or over the LAN.  (or serial, but
+currently ipmitool does not support the serial interface)
+
+
+System Interface
+----------------
+There are multiple types of system interfaces, but they are all similar
+enough to allow a single well-designed driver to support them all.  
+Different types of system interfaces include Keyboard Controller Style
+(KCS), Block Transfer (BT), System Management Interface Chip (SMIC) and
+SMBus.  Different hardware vendors will have different preference and
+implementations.
+
+On Linux the OpenIPMI kernel driver should support all of these system
+interfaces and it should be a simple matter of loading the right
+kernel modules and setting up the device node to use it.  The driver
+module names vary slightly in different kernel versions, but for all
+releases you need these two modules:
+
+  ipmi_msghandler: incoming and outgoing message handler
+  ipmi_devintf: character device interface to IPMI driver
+
+For 2.4.x and early 2.6.x kernels you need to choose a module based on
+the type of system interface your hardware supports.  For example:
+
+  ipmi_kcs_drv: Keyboard Controller Style driver
+
+More recent 2.6.x kernels have combined these into a single module:
+
+  ipmi_si: a universal IPMI system interface driver
+
+See the documentation that comes with your distribution and/or kernel
+for more information on what kernel modules are required.  Once the
+required modules are loaded and the driver has found a suitable system
+interface to the BMC then you need to ensure the device node at
+/dev/ipmi0 is pointing at the correct major number.
+
+This is because OpenIPMI is given a dynamically assigned major number
+when it is loaded, but depending on what other modules are present
+this number may be anywhere from 254 on down.  The easiest way to tell
+is to check the output of /proc/devices and see what major number the
+"ipmidev" device is assigned to.
+
+There is a sample script included with ipmitool called ipmi.init that
+can be used to automate this process at bootup.
+
+
+LAN Interface
+-------------
+This is often referred to as "IPMI-over-LAN" and defines how IPMI messages
+can be sent to and from the BMC encapsulated in Remote Management Control
+Protocol (RMCP) packets which are then transferred as UDP datagrams.
+
+IPMI-over-LAN is only supported with version 1.5 and higher of the IPMI
+specification.  The RMCP packet format is defined by the Alert Standard
+Forum, and it has been followed up with the RMCP+ protocol that adds
+encryption and payload support.  The IPMIv2 specification was updated
+accordingly to to support the RMCP+ protocol and brings with it enhanced
+security with encryption as well as support for Serial over LAN.
+
+There are different types of LAN interfaces as well.  Some systems have
+shared management networks where the NIC will intercept UDP packets to
+port 623 and redirect them to the BMC over SMBUS.  This type of LAN
+interface requires that the BMC be configured with the same settings that
+the system uses.  It also suffers from an increased security risk just by
+the nature of sharing that interface with normal traffic.
+
+I have also seen bugs in some implementations that have rendered the
+IPMI-over-LAN feature "dangerous" to enable in some situations.  (in
+particular there can be an issue with RPC because it will sometimes choose
+to use port 623 and you will lose response packets...)
+
+There is a sample shell script included with ipmitool called bmclanconf
+that can be used to simplify the LAN settings configuration process using
+the System Interface to configure the settings.  In some cases the
+hardware will come with a utility (often a DOS bootable CD) for configuring
+enabling the LAN interface as well.
+
+In order to support the IPMIv2.0 interface you must have an OpenSSL library
+with the required encrytion functions.  Recent distributions should have
+no problems.  The IPMIv1.5 interface will attempt to use OpenSSL for MD5
+hash function at compile time but if that is not found it will use an
+internal library.
+
+
+Usage
+=====
+All invocations of ipmitool require specifying an interface to use, unless
+you want to use the default interface as set at compile time.  Each call
+must also specify a command to run.  You can see the list of supported
+interfaces and which is default as well as a list of top level commands in
+the usage output available with the -h option:
+
+usage: ipmitool [options...] <command>
+
+   -h            This help
+   -V            Show version information
+   -v            Verbose (can use multiple times)
+   -c            Display output in comma separated format
+   -I intf       Interface to use
+   -H hostname   Remote host name for LAN interface
+   -p port       Remote RMCP port [default=623]
+   -L level      Remote session privilege level [default=USER]
+   -A authtype   Force use of authtype NONE, PASSWORD, MD2 or MD5
+   -U username   Remote session username
+   -P password   Remote session password
+   -f file       Read remote session password from file
+   -a            Prompt for remote password
+   -E            Read password from IPMI_PASSWORD environment variable
+   -m address    Set local IPMB address
+   -t address    Bridge request to remote target address
+
+Interfaces:
+    open         Linux OpenIPMI Interface [default]
+    imb          Intel IMB Interface
+    lan          IPMI v1.5 LAN Interface
+    lanplus      IPMI v2.0 RMCP+ LAN Interface
+
+Commands:
+    raw          Send a RAW IPMI request and print response
+    lan          Configure LAN Channels
+    chassis      Get chassis status and set power state
+    event        Send pre-defined events to BMC
+    bmc          Print BMC status and configure global enables
+    sdr          Print Sensor Data Repository entries and readings
+    sensor       Print detailed sensor information
+    fru          Print built-in FRU and scan SDR for FRU locators
+    sel          Print System Evelnt Log
+    sol          Configure IPMIv2.0 Serial-over-LAN
+    user         Configure BMC users
+    channel      Configure BMC channels
+    session      Print session information
+    shell        Launch interactive IPMI shell
+    exec         Run list of commands from file
+    set          Set runtime variable for shell and exec
+
+
+Commands
+========
+More help on the supported commands can be found by running them with the
+help argument, for example "chassis help".  There are a few commands with
+special meaning:
+
+> shell:  This command will launch an shell interface to the ipmitool
+  command set.  You can use this for interactively entering commands to
+  monitor system status.  An example session:
+
+# ipmitool -I open shell
+ipmitool> chassis status
+System Power         : off
+Power Overload       : false
+Power Interlock      : inactive
+Main Power Fault     : false
+Power Control Fault  : false
+Power Restore Policy : always-off
+Last Power Event     : command
+Chassis Intrusion    : active
+Front-Panel Lockout  : inactive
+Drive Fault          : false
+Cooling/Fan Fault    : false
+ipmitool> user list 7
+ID  Name             Callin  Link Auth  IPMI Msg   Channel Priv Limit
+1                    true    false      true       ADMINISTRATOR
+ipmitool> exit
+
+> exec:  This command will read a text file and execute ipmitool commands
+  in sequence.  It can be used for scriptable commands:
+
+# cat lansetup.scr
+lan set 7 ipsrc static
+lan set 7 ipaddr 10.1.1.10
+lan set 7 netmask 255.255.255.0
+lan set 7 defgw ipaddr 10.1.1.254
+# ipmitool -I open exec lansetup.scr
+Setting LAN IP Address to 10.1.1.10
+Setting Lan Subnet Mask to 255.255.255.0
+Setting Lan Default Gateway IP to 10.1.1.254
+
+> set:  This command can be used by the shell and exec modes to configure
+  various session parameters:
+
+  hostname <host>        Session hostname
+  username <user>        Session username
+  password <pass>        Session password
+  privlvl <level>        Session privilege level force
+  authtype <type>        Authentication type force
+  localaddr <addr>       Local IPMB address
+  targetaddr <addr>      Remote target IPMB address
+  port <port>            Remote RMCP port
+  csv [level]            enable output in comma separated format
+  verbose [level]        Verbose level
+
+# cat getstatus.scr
+set hostname sf-v20z-1
+set password admin
+chassis status
+# ipmitool -I lan exec getstatus.scr
+Set session hostname to lx50
+Set session password
+System Power         : off
+Power Overload       : false
+Power Interlock      : inactive
+Main Power Fault     : false
+Power Control Fault  : false
+Power Restore Policy : always-off
+Last Power Event     : command
+Chassis Intrusion    : active
+Front-Panel Lockout  : inactive
+Drive Fault          : false
+Cooling/Fan Fault    : false
+
+
+ipmievd
+=======
+Included with ipmitool is another utility called ipmievd that is a daemon
+which will listen for events from the BMC that are being sent to the SEL
+and also log those messages to syslog.  By default when run (as root) with
+no arguments it will daemonize and poll on the OpenIPMI device waiting for
+an event notification.  Upon receipt of an event it will log it to syslog
+with the LOG_LOCAL4 facility.  You can test ipmievd by sending test events
+over the LAN interface with ipmitool:
+
+remote# ipmievd
+
+local$ ipmitool -I lan -H lx50 -P admin event help
+usage: event <num>
+   1 : Temperature - Upper Critical - Going High
+   2 : Voltage Threshold - Lower Critical - Going Low
+   3 : Memory - Correctable ECC
+local$ ipmitool -I lan -H lx50 -P admin event 1
+Sending Temperature - Upper Critical - Going High event to BMC
+local$ ipmitool -I lan -H lx50 -P admin event 2
+Sending Voltage Threshold - Lower Critical - Going Low event to BMC
+local$ ipmitool -I lan -H lx50 -P admin event 3
+Sending Memory - Correctable ECC event to BMC
+
+remote# tail /var/log/messages   (timestamps removed)
+ipmievd: Waiting for events...
+ipmievd: Temperature Sensor 30 - Upper Critical - going high
+ipmievd: Voltage Sensor 60 - Lower Critical - going low
+ipmievd: Memory Sensor 01 - Correctable ECC
+
+
+Resources
+=========
+IPMItool homepage
+http://ipmitool.sourceforge.net
+
+IPMItool manpage
+http://ipmitool.sourceforge.net/manpage.html
+
+IPMItool overview paper from Linux.conf.au 2004
+http://ipmitool.sourceforge.net/lca2004_ipmitool.pdf
+
+Intelligent Platform Management Interface specification
+http://www.intel.com/design/servers/ipmi/spec.htm
+
+OpenIPMI project: Linux IPMI kernel driver and userland library
+http://openipmi.sourceforge.net
+

ipmitool/bootstrap

@@ -29,13 +29,9 @@
 # PUNITIVE DAMAGES, HOWEVER CAUSED AND REGARDLESS OF THE THEORY OF
 # LIABILITY, ARISING OUT OF THE USE OF OR INABILITY TO USE THIS SOFTWARE,
 # EVEN IF SUN HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
-# 
-# You acknowledge that this software is not designed or intended for use
-# in the design, construction, operation or maintenance of any nuclear
-# facility.
 
 aclocal
-libtoolize --automake --copy --ltdl
+libtoolize --automake --copy
 
 autoheader
 automake --foreign --add-missing --copy

ipmitool/configure.in

@@ -2,75 +2,46 @@ dnl
 dnl autoconf for ipmitool
 dnl
 AC_INIT([src/ipmitool.c])
-AM_INIT_AUTOMAKE([ipmitool], [1.5.6])
-AM_CONFIG_HEADER([config.h])
+AC_CANONICAL_SYSTEM
+AM_INIT_AUTOMAKE([ipmitool], [1.8.7])
+AM_CONFIG_HEADER(config.h)
 AC_CONFIG_SRCDIR([src/ipmitool.c])
 AC_PREREQ(2.50)
-
-IPMITOOL_PKG=ipmitool
-AC_SUBST(IPMITOOL_PKG)
 AC_SUBST(ac_configure_args)
 
-dnl check for programs
+dnl check for requirements
 AC_PROG_CC
-AC_PROG_CPP
 AC_PROG_INSTALL
 AC_PROG_LN_S
 AC_PROG_MAKE_SET
+AC_CHECK_PROG([RPMBUILD], [rpmbuild], [rpmbuild], [rpm])
+AC_CHECK_PROG([SED], [sed], [sed])
 
-AC_CHECK_PROG(SED, sed, sed)
-
-dnl setup libtool and ltdl
-AC_LIB_LTDL
-AC_LIBTOOL_DLOPEN
-AC_LIBLTDL_CONVENIENCE
-AM_PROG_LIBTOOL
-LIBTOOL="$LIBTOOL --silent"
-AC_SUBST(LTDLINCL)
-AC_SUBST(LIBLTDL)
-AC_CONFIG_SUBDIRS(libltdl)
-
-AC_CHECK_LIB([m], [pow], [], [
-	echo "** libm library pow() not found!"
-	exit 1
-	])
-
-AC_SEARCH_LIBS(gethostbyname, nsl)
-AC_SEARCH_LIBS(socket, socket, ,
-	[AC_CHECK_LIB(nsl, socket, LIBS="$LIBS -lsocket -lnsl", , -lsocket)])
-
-AC_CHECK_LIB([ltdl], [lt_dlopen], [], [
-	echo "** libltdl library lt_dlopen() not found!"
-	exit 1
-	])
-
-dnl check for headers
 AC_HEADER_STDC
-AC_CHECK_HEADERS([stdlib.h string.h sys/ioctl.h sys/stat.h unistd.h])
+AC_CHECK_HEADERS([stdlib.h string.h sys/ioctl.h sys/stat.h unistd.h paths.h])
 AC_CHECK_HEADERS([arpa/inet.h fcntl.h netdb.h netinet/in.h sys/socket.h])
+AC_CHECK_HEADERS([sys/byteorder.h byteswap.h])
 
-have_openipmi=no
-AC_CHECK_HEADER([linux/ipmi.h],
-	[have_openipmi=yes],
-	[AC_MSG_WARN([Unable to find OpenIPMI header files])])
-
-dnl check for typedefs, structs, and compiler options
 AC_C_CONST
 AC_C_INLINE
+AC_C_BIGENDIAN
 
-dnl check for lib functions
-AC_PROG_GCC_TRADITIONAL
 AC_FUNC_MALLOC
 AC_FUNC_SELECT_ARGTYPES
-AC_FUNC_STAT
 AC_FUNC_STRTOD
 AC_CHECK_FUNCS([alarm gethostbyname socket select])
 AC_CHECK_FUNCS([memmove memset strchr strdup strerror])
+AC_CHECK_FUNCS([getpassphrase])
 
-dnl check for byteswap functionality
-AC_CHECK_HEADERS([asm/byteorder.h byteswap.h])
-AC_CHECK_FUNCS([bswap_16 bswap_32])
-AC_C_BIGENDIAN
+CFLAGS="$CFLAGS -fno-strict-aliasing"
+
+AM_PROG_LIBTOOL
+LIBTOOL="$LIBTOOL --silent"
+
+AC_SEARCH_LIBS([gethostbyname], [nsl])
+AC_SEARCH_LIBS([socket], [socket], [],
+	[AC_CHECK_LIB([nsl], [socket],
+		[LIBS="$LIBS -lsocket -lnsl"], [], [-lsocket])])
 
 if test "x$prefix" = "xNONE"; then
   prefix="$ac_default_prefix"
@@ -80,54 +51,310 @@ if test "x$exec_prefix" = "xNONE"; then
   exec_prefix="$prefix"
 fi
 
-dnl enable plugins for interfaces
-AC_ARG_WITH([plugin-path],
-	[[  --with-plugin-path=DIR  Set plugin path to DIR]],
-	[pluginpath="$withval"],
-	[pluginpath="${exec_prefix}/lib/ipmitool"])
+enable_all_options=yes
 
-AC_DEFINE_UNQUOTED(PLUGIN_PATH, "$pluginpath", "IPMI interface plugin path")
-AC_SUBST(pluginpath)
+dnl set some things so we build with GNU tools on Solaris
+case "$host_os" in
+solaris*)
+	MAKE=gmake
+	STRIP=gstrip
+	LD=gld
+	AR=gar
+	# openssl libs are in /usr/sfw/lib on solaris 10
+        LIBS="$LIBS -R/usr/sfw/lib"
+	# disable the linux-specific interfaces
+	# and bmc on SPARC (there is no bmc driver for SPARC)
+	if [[ `mach -p` = sparc ]]; then
+		enable_intf_bmc=no
+	else
+		enable_intf_bmc=yes
+	fi
+	enable_intf_imb=no
+	enable_intf_open=no
+	enable_intf_lipmi=no
+	enable_ipmishell=no
+	enable_all_options=no
+	;;
+*cygwin*)
+	# disable the linux and solaris-specific interfaces
+	enable_intf_imb=no
+	enable_intf_open=no
+	enable_intf_lipmi=no
+	enable_intf_bmc=no
+	enable_ipmishell=no
+	;;
+*darwin*)
+	# disable the linux and solaris-specific interfaces
+	enable_intf_imb=no
+	enable_intf_open=no
+	enable_intf_lipmi=no
+	enable_intf_bmc=no
+	enable_ipmishell=no
+	;;
+*freebsd*)
+	enable_intf_imb=no
+	enable_intf_lipmi=no
+	enable_intf_bmc=no
+	;;
+*netbsd*)
+	enable_intf_imb=no
+	enable_intf_lipmi=no
+	enable_intf_bmc=no
+	enable_intf_open=no
+	;;
+esac
 
+AC_SUBST(ARCH, $host_cpu)
+AC_SUBST(OS, $host_os)
+AC_SUBST(PSTAMP, $host)
+AC_SUBST(BASEDIR, $prefix)
+
+dnl allow solaris builds to include all options
+AC_ARG_ENABLE([solaris-opt],
+	[AC_HELP_STRING([--enable-solaris-opt],
+			[enable all options for Solaris [default=no]])],
+	[], [enable_solaris_opt=no])
+if test "x$enable_all_options" = "xyes" || test "x$enable_solaris_opt" = "xyes"; then
+   AC_DEFINE(ENABLE_ALL_OPTIONS, [1], [Define to 1 to enable all command line options.])
+fi
+
+dnl check for OpenSSL functionality
+AC_ARG_ENABLE([internal-md5],
+	[AC_HELP_STRING([--enable-internal-md5],
+			[enable internal MD5 library [default=no]])],
+	[], [enable_internal_md5=no])
+
+AC_CHECK_LIB([crypto], [EVP_aes_128_cbc],
+	[if test "x$enable_internal_md5" != "xyes"; then
+	    have_crypto=yes; LIBS="$LIBS -lcrypto"
+	fi], [have_crypto=no], [-lcrypto])
+
+AC_CHECK_LIB([crypto], [MD5_Init],
+	[if test "x$enable_internal_md5" != "xyes"; then
+	    if test "x$have_crypto" != "xyes"; then
+	    	LIBS="$LIBS -lcrypto"
+		have_md5=yes
+	    fi
+	    AC_DEFINE(HAVE_CRYPTO_MD5, [1], [Define to 1 if libcrypto supports MD5.])
+	fi], [], [-lcrypto])
+
+AC_CHECK_LIB([crypto], [MD2_Init],
+	[if test "x$enable_internal_md5" != "xyes"; then
+	    if test "x$have_crypto" != "xyes" && test "x$have_md5" != "xyes"; then
+	        LIBS="$LIBS -lcrypto"
+	        have_md2=yes
+	    fi
+	    AC_DEFINE(HAVE_CRYPTO_MD2, [1], [Define to 1 if libcrypto supports MD2.])
+	fi], [], [-lcrypto])
+
+dnl enable IPMIv1.5 LAN interface
 AC_ARG_ENABLE([intf-lan],
-	[[  --enable-intf-lan       enable IPMI-over-LAN interface [default=yes]]],
-	[if test "x$enableval" = "xyes"; then
-	    PLUGINS="$PLUGINS lan"
-	fi],
-	[PLUGINS="$PLUGINS lan"])
+	[AC_HELP_STRING([--enable-intf-lan],
+			[enable IPMIv1.5 LAN interface [default=yes]])],
+	[], [enable_intf_lan=yes])
+if test "x$enable_intf_lan" = "xstatic" || test "x$enable_intf_lan" = "xplugin"; then
+   enable_intf_lan=yes
+fi
+if test "x$enable_intf_lan" = "xyes"; then
+    AC_DEFINE(IPMI_INTF_LAN, [1], [Define to 1 to enable LAN IPMIv1.5 interface.])
+    AC_SUBST(INTF_LAN, [lan])
+    AC_SUBST(INTF_LAN_LIB, [libintf_lan.la])
+    IPMITOOL_INTF_LIB="$IPMITOOL_INTF_LIB lan/libintf_lan.la"
+fi
 
-AC_ARG_ENABLE([intf-open],
-	[[  --enable-intf-open      enable OpenIPMI device interface [default=no]]],
-	[if test "x$enableval" = "xyes"; then
-	    if test "x$have_openipmi" = "xyes"; then
-		PLUGINS="$PLUGINS open"
-	    else
-		echo "** Unable to build OpenIPMI interface support!"
-		exit 1
+dnl enable IPMIv2.0 RMCP+ LAN interface
+AC_ARG_ENABLE([intf-lanplus],
+	[AC_HELP_STRING([--enable-intf-lanplus],
+			[enable IPMIv2.0 RMCP+ LAN interface [default=auto]])],
+	[if test "x$enable_intf_lanplus" != "xno" && test "x$have_crypto" != "xyes"; then
+	    echo "** The lanplus interface requires an SSL library with EVP_aes_128_cbc defined."
+	    enable_intf_lanplus=no
+	fi],
+	[enable_intf_lanplus=$have_crypto])
+if test "x$enable_intf_lanplus" = "xstatic" || test "x$enable_intf_lanplus" = "xplugin"; then
+   enable_intf_lanplus=yes
+fi
+if test "x$enable_intf_lanplus" = "xyes"; then
+    AC_DEFINE(IPMI_INTF_LANPLUS, [1], [Define to 1 to enable LAN+ IPMIv2 interface.])
+    AC_SUBST(INTF_LANPLUS, [lanplus])
+    AC_SUBST(INTF_LANPLUS_LIB, [libintf_lanplus.la])
+    IPMITOOL_INTF_LIB="$IPMITOOL_INTF_LIB lanplus/libintf_lanplus.la"
+else
+    enable_intf_lanplus=no
+fi
+
+dnl look for OpenIPMI header files
+AC_ARG_WITH([kerneldir],
+	[AC_HELP_STRING([--with-kerneldir=DIR],
+			[set kernel include path to DIR])],
+	[if test "x$with_kerneldir" = "xyes"; then
+	    with_kerneldir="/lib/modules/`uname -r`/build"
+	fi
+	CFLAGS="$CFLAGS -I ${with_kerneldir}/include"
+	AC_SUBST(CFLAGS)
+	if test -s ${with_kerneldir}/include/linux/version.h ; then
+	    kernelver=`grep UTS_RELEASE ${with_kerneldir}/include/linux/version.h | \
+	        sed 's/^\#define UTS_RELEASE \"\(2\.[0-9]\)\..*/\1/'`
+	    if test "x$kernelver" = "x2.6"; then
+		CPPFLAGS="$CPPFLAGS -D__user="
+		AC_SUBST(CPPFLAGS)
 	    fi
 	fi])
+AC_CHECK_HEADER([linux/ipmi.h],
+	[AC_DEFINE(HAVE_OPENIPMI_H, [1],
+	[Define to 1 if you have the <linux/ipmi.h> header file.])],
+	[AC_CHECK_HEADER([sys/ipmi.h],
+		[AC_DEFINE(HAVE_FREEBSD_IPMI_H, [1],
+		[Define to 1 if you have the <sys/ipmi.h> header file.])],
+		[echo "** Unable to find OpenIPMI header files.  Using internal version."])])
 
-AC_SUBST(PLUGINS)
+dnl look for termios header file
+AC_CHECK_HEADER([termios.h],
+	[AC_DEFINE(HAVE_TERMIOS_H, [1], [Define to 1 if you have <termios.h>.])],
+	[AC_CHECK_HEADER([sys/termios.h],
+		[AC_DEFINE(HAVE_SYS_TERMIOS_H, [1], [Define to 1 if you have <sys/termios.h>.])],
+		[echo "** Unable to find termios header file."])])
 
-AC_ARG_ENABLE([ipmievd],
-	[[  --enable-ipmievd        enable IPMI event daemon [default=no]]],,)
+dnl set RPM distro tag for use in RPM name
+AC_ARG_WITH([rpm-distro],
+	[AC_HELP_STRING([--with-rpm-distro=DISTRO],
+			[set Linux distribution tag for use in RPM version string])],
+	[AC_SUBST(DISTRO, $with_rpm_distro)])
 
-AM_CONDITIONAL(IPMIEVD, test "x$enable_ipmievd" = "xyes")
+dnl enable Linux OpenIPMI interface
+AC_ARG_ENABLE([intf-open],
+	[AC_HELP_STRING([--enable-intf-open],
+			[enable Linux OpenIPMI interface [default=auto]])],
+	[], [enable_intf_open=yes])
+if test "x$enable_intf_open" = "xstatic" || test "x$enable_intf_open" = "xplugin"; then
+   enable_intf_open=yes
+fi
+if test "x$enable_intf_open" = "xyes"; then
+    AC_DEFINE(IPMI_INTF_OPEN, [1], [Define to 1 to enable Linux OpenIPMI interface.])
+    AC_SUBST(INTF_OPEN, [open])
+    AC_SUBST(INTF_OPEN_LIB, [libintf_open.la])
+    IPMITOOL_INTF_LIB="$IPMITOOL_INTF_LIB open/libintf_open.la"
+fi
 
-AC_CONFIG_FILES([ipmitool.spec
-		Makefile
+dnl enable Intel IMB interface
+AC_ARG_ENABLE([intf-imb],
+	[AC_HELP_STRING([--enable-intf-imb],
+			[enable Intel IMB driver interface [default=auto]])],
+	[], [enable_intf_imb=yes])
+if test "x$enable_intf_imb" = "xstatic" || test "x$enable_intf_imb" = "xplugin"; then
+   enable_intf_imb=yes
+fi
+if test "x$enable_intf_imb" = "xyes"; then
+    AC_DEFINE(IPMI_INTF_IMB, [1], [Define to 1 to enable Intel IMB interface.])
+    AC_SUBST(INTF_IMB, [imb])
+    AC_SUBST(INTF_IMB_LIB, [libintf_imb.la])
+    IPMITOOL_INTF_LIB="$IPMITOOL_INTF_LIB imb/libintf_imb.la"
+fi
+
+dnl enable Solaris LIPMI interface
+AC_CHECK_HEADER([sys/lipmi/lipmi_intf.h], [have_lipmi=yes], [have_lipmi=no])
+AC_ARG_ENABLE([intf-lipmi],
+	[AC_HELP_STRING([--enable-intf-lipmi],
+			[enable Solaris 9 x86 IPMI interface [default=no]])],
+	[if test "x$enable_intf_lipmi" != "xno" && test "x$have_lipmi" != "xyes"; then
+	    echo "** Unable to build Solaris 9 x86 IPMI interface support!"
+	    enable_intf_lipmi=no
+	fi],
+	[enable_intf_lipmi=no])
+if test "x$enable_intf_lipmi" = "xstatic" || test "x$enable_intf_lipmi" = "xplugin"; then
+   enable_intf_lipmi=yes
+fi
+if test "x$enable_intf_lipmi" = "xyes"; then
+    AC_DEFINE(IPMI_INTF_LIPMI, [1], [Define to 1 to enable Solaris 9 LIPMI interface.])
+    AC_SUBST(INTF_LIPMI, [lipmi])
+    AC_SUBST(INTF_LIPMI_LIB, [libintf_lipmi.la])
+    IPMITOOL_INTF_LIB="$IPMITOOL_INTF_LIB lipmi/libintf_lipmi.la"
+fi
+
+dnl enable Solaris BMC interface
+AC_ARG_ENABLE([intf-bmc],
+	[AC_HELP_STRING([--enable-intf-bmc],
+			[enable Solaris 10 x86 IPMI interface [default=auto]])],,
+	[enable_intf_bmc=no])
+if test "x$enable_intf_bmc" = "xstatic" || test "x$enable_intf_bmc" = "xplugin"; then
+   enable_intf_bmc=yes
+fi
+if test "x$enable_intf_bmc" = "xyes"; then
+    AC_DEFINE(IPMI_INTF_BMC, [1], [Define to 1 to enable Solaris 10 BMC interface.])
+    AC_SUBST(INTF_BMC, [bmc])
+    AC_SUBST(INTF_BMC_LIB, [libintf_bmc.la])
+    IPMITOOL_INTF_LIB="$IPMITOOL_INTF_LIB bmc/libintf_bmc.la"
+fi
+
+AC_SUBST(IPMITOOL_INTF_LIB)
+
+dnl check for readline library to enable ipmi shell
+AC_ARG_ENABLE([ipmishell],
+	[AC_HELP_STRING([--enable-ipmishell],
+			[enable IPMI shell interface [default=yes]])],
+	[], [enable_ipmishell=yes])
+if test "x$enable_ipmishell" = "xyes"; then
+	AC_SEARCH_LIBS([tgetent], [readline ncurses curses termcap])
+	AC_SEARCH_LIBS([initscr], [curses ncurses], [have_curses=yes])
+	AC_SEARCH_LIBS([readline], [readline edit], [have_readline=yes])
+	if test "x$have_curses" = "xyes" && test "x$have_readline" = "xyes"; then
+		AC_DEFINE(HAVE_READLINE, [1], [Define to 1 if readline present.])
+	fi
+fi
+
+dnl Enable -Wall -Werror
+AC_ARG_ENABLE([buildcheck],
+	[AC_HELP_STRING([--enable-buildcheck],
+			[enable -Wall -Werror for build testing [default=no]])],
+	[if test "x$enable_buildcheck" != "xno"; then
+	    CFLAGS="$CFLAGS -Wall -Werror -Wpointer-arith -Wstrict-prototypes"
+	fi], [])
+
+AC_SUBST(CFLAGS)
+
+dnl Enable extra file security paranoia
+AC_ARG_ENABLE([file-security],
+	[AC_HELP_STRING([--enable-file-security],
+			[enable extra security checks on files opened for read [default=no]])],
+	[if test "x$enable_file_security" != "xno"; then
+	    AC_DEFINE(ENABLE_FILE_SECURITY, [1], [Define to 1 for extra file security.])
+	fi], [])
+
+dnl Generate files for build
+AC_CONFIG_FILES([Makefile
 		doc/Makefile
+		contrib/Makefile
+		control/Makefile
+		control/pkginfo
+		control/prototype
+		control/rpmmacros
+		control/ipmitool.spec
 		lib/Makefile
 		include/Makefile
 		include/ipmitool/Makefile
 		src/Makefile
 		src/plugins/Makefile
 		src/plugins/lan/Makefile
-		src/plugins/open/Makefile])
+                src/plugins/lanplus/Makefile
+		src/plugins/open/Makefile
+		src/plugins/imb/Makefile
+		src/plugins/bmc/Makefile
+		src/plugins/lipmi/Makefile])
 
 AC_OUTPUT
 
-echo
-echo Building $PACKAGE version $VERSION with interface plugins: $PLUGINS
-echo   Plugin Path:  $pluginpath
-echo
+AC_MSG_RESULT([])
+AC_MSG_RESULT([ipmitool $VERSION])
+AC_MSG_RESULT([])
+AC_MSG_RESULT([Interfaces])
+AC_MSG_RESULT([  lan     : $enable_intf_lan])
+AC_MSG_RESULT([  lanplus : $enable_intf_lanplus])
+AC_MSG_RESULT([  open    : $enable_intf_open])
+AC_MSG_RESULT([  imb     : $enable_intf_imb])
+AC_MSG_RESULT([  bmc     : $enable_intf_bmc])
+AC_MSG_RESULT([  lipmi   : $enable_intf_lipmi])
+AC_MSG_RESULT([])
+AC_MSG_RESULT([Extra tools])
+AC_MSG_RESULT([  ipmievd : yes])
+AC_MSG_RESULT([])
+

ipmitool/contrib/Makefile.am

@@ -0,0 +1,38 @@
+# Copyright (c) 2003 Sun Microsystems, Inc.  All Rights Reserved.
+# 
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+# 
+# Redistribution of source code must retain the above copyright
+# notice, this list of conditions and the following disclaimer.
+# 
+# Redistribution in binary form must reproduce the above copyright
+# notice, this list of conditions and the following disclaimer in the
+# documentation and/or other materials provided with the distribution.
+# 
+# Neither the name of Sun Microsystems, Inc. or the names of
+# contributors may be used to endorse or promote products derived
+# from this software without specific prior written permission.
+# 
+# This software is provided "AS IS," without a warranty of any kind.
+# ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND WARRANTIES,
+# INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A
+# PARTICULAR PURPOSE OR NON-INFRINGEMENT, ARE HEREBY EXCLUDED.
+# SUN MICROSYSTEMS, INC. ("SUN") AND ITS LICENSORS SHALL NOT BE LIABLE
+# FOR ANY DAMAGES SUFFERED BY LICENSEE AS A RESULT OF USING, MODIFYING
+# OR DISTRIBUTING THIS SOFTWARE OR ITS DERIVATIVES.  IN NO EVENT WILL
+# SUN OR ITS LICENSORS BE LIABLE FOR ANY LOST REVENUE, PROFIT OR DATA,
+# OR FOR DIRECT, INDIRECT, SPECIAL, CONSEQUENTIAL, INCIDENTAL OR
+# PUNITIVE DAMAGES, HOWEVER CAUSED AND REGARDLESS OF THE THEORY OF
+# LIABILITY, ARISING OUT OF THE USE OF OR INABILITY TO USE THIS SOFTWARE,
+# EVEN IF SUN HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
+
+MAINTAINERCLEANFILES	= Makefile.in
+
+dist_pkgdata_DATA	= README oem_ibm_sel_map
+
+dist_pkgdata_SCRIPTS	= bmclanconf ipmi.init.basic ipmi.init.redhat \
+	ipmievd.init.redhat ipmievd.init.suse ipmievd.init.debian \
+	collect_data.sh create_rrds.sh create_webpage_compact.sh create_webpage.sh
+

ipmitool/contrib/README

@@ -0,0 +1,95 @@
+
+Graphs for ipmitool
+-------------------
+
+This is a set of shell-scripts to quickly create a webpage with pretty graphs!
+
+Prerequisites are a webserver with cgi-bin support and RRDtool, a data
+collection and graphing utility you can get here:
+
+http://people.ee.ethz.ch/~oetiker/webtools/rrdtool/
+
+
+First, decide on a directory where to store the RRDtool database files and make
+sure it exists. The user that will run the cronjob to collect updates must have
+write permissions in this dir.
+
+Next, you'll need to edit some variables at the top of each script.
+
+Common to all scripts:
+
+hostname	Override this if you are collecting data from a remote host,
+		or if the $HOSTNAME variable is incorrect. 
+
+ipmi_cmd	Command line used to call ipmitool. Default is to collect
+		data from the local server using OpenIPMI.
+
+		If you want to collect data from a remote host, add the
+		-I lan, -H, -U and -P options as necessary.
+
+		BIG NOTE! I do not recommend using remote data collection since
+		you'll have to store the password in the script. If you do,
+		make sure unauthorized people can't read or execute the scripts
+		or they'll be able to wreak havoc on your server.
+
+rrd_dir		Enter the dir where to store the RRDtool database here.
+
+
+Now you can get the data collection going. Run create_rrds.sh to create the
+RDDtool database, you'll find one .rrd file per sensor in the designated dir.
+Add a line to your crontab that executes collect_data.sh every 5 minutes.
+
+Something like this:
+*/5 * * * * /usr/local/bin/collect_data.sh
+
+If you are a Solaris user you'll have to write the more verbose:
+0,5,10,15,20,25,30,35,40,45,50,55 * * * * /usr/local/bin/collect_data.sh
+
+
+Finally it's time to create the webpage, begin with editing some more variables
+in the create_webpage.sh and/or create_webpage_compact.sh scripts:
+
+rrdcgi		Full path to the rrdcgi executable.
+
+img_dir		Directory to store the graph images. This path must be within
+		the document root and writable by the web server user.
+
+		Example: /usr/local/apache2/htdocs/images/graphs
+
+web_dir		Relative path of the URL where the images will show up
+		on the web server.
+
+		Example: With the img_dir path above the corresponding web_dir
+		would be /images/graphs
+
+graph_width	Size of the graph area in pixels (excluding title, legends etc.)
+graph_height
+
+graph_daily	Decide which of daily, weekly and monthly graphs you want
+graph_weekly	included on the page.
+graph_monthly
+
+
+Finally run the create webpage script and store the output as a cgi-script and
+don't forget to make it executable.
+
+Example:
+
+create_webpage.sh > /usr/local/apache2/cgi-bin/my_ipmi_graphs.cgi
+chmod 755 /usr/local/apache2/cgi-bin/my_ipmi_graphs.cgi
+
+Now you can surf to http://my.server.com/cgi-bin/my_ipmi_graphs.cgi and enjoy!
+
+
+The difference between create_webpage.sh and create_webpage_compact.sh is that
+the first script displays sensor thresholds in the graphs. The second script
+collects all sensors that measure the same unit into the same graph thus
+producing a lot fewer graphs.
+
+Note, RRDtool sometimes scales the graphs such that the sensor thresholds
+fall outside the visible area.
+
+
+Happy graphing!
+
+

ipmitool/contrib/bmclanconf

@@ -0,0 +1,308 @@
+#!/bin/bash
+#
+# Copyright (c) 2003 Sun Microsystems, Inc.  All Rights Reserved.
+# 
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+# 
+# Redistribution of source code must retain the above copyright
+# notice, this list of conditions and the following disclaimer.
+# 
+# Redistribution in binary form must reproduce the above copyright
+# notice, this list of conditions and the following disclaimer in the
+# documentation and/or other materials provided with the distribution.
+# 
+# Neither the name of Sun Microsystems, Inc. or the names of
+# contributors may be used to endorse or promote products derived
+# from this software without specific prior written permission.
+# 
+# This software is provided "AS IS," without a warranty of any kind.
+# ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND WARRANTIES,
+# INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A
+# PARTICULAR PURPOSE OR NON-INFRINGEMENT, ARE HEREBY EXCLUDED.
+# SUN MICROSYSTEMS, INC. ("SUN") AND ITS LICENSORS SHALL NOT BE LIABLE
+# FOR ANY DAMAGES SUFFERED BY LICENSEE AS A RESULT OF USING, MODIFYING
+# OR DISTRIBUTING THIS SOFTWARE OR ITS DERIVATIVES.  IN NO EVENT WILL
+# SUN OR ITS LICENSORS BE LIABLE FOR ANY LOST REVENUE, PROFIT OR DATA,
+# OR FOR DIRECT, INDIRECT, SPECIAL, CONSEQUENTIAL, INCIDENTAL OR
+# PUNITIVE DAMAGES, HOWEVER CAUSED AND REGARDLESS OF THE THEORY OF
+# LIABILITY, ARISING OUT OF THE USE OF OR INABILITY TO USE THIS SOFTWARE,
+# EVEN IF SUN HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
+
+
+# This script is designed for Sun Fire LX50, V60x and V65x systems.
+# It may work with other setups as long as you use the correct channel
+# and interface settings.  It can be used on the V20z as long as you
+# specify network settings on the command line.
+#
+# If the wrong channel is used you could lose network access to the
+# box because your BMC will be sending out bad Gratuitous ARP packets
+# with the wrong MAC address.  You will need to use a console or
+# override your local ARP cache with the correct addr.
+
+usage ()
+{
+    echo "
+usage: $0 -c <chan> -i <interface> [options]
+       $0 -c <chan> [-v|w|x|y|z address] [options]
+
+    -c channel     Which BMC channel to configure [-c help for more info]
+    -i interface   Auto-configure BMC based on interface network settings
+    -v address     Use specified IP address
+    -w address     Use specified Netmask address
+    -x address     Use specified MAC address
+    -y address     Use specified Gateway IP address
+    -z address     Use specified Gateway MAC address
+    -m interface   Which IPMI interface to use [default linux=open solaris=lipmi]
+    -p password    Set BMC channel password
+    -s string      Set SNMP community string
+    -a interval    Set Gratuitous ARP interval, off=0, default=4
+    -r             Reset BMC channel, zero all network settings, disable
+    -d             Debug mode, does not make any changes
+"
+    exit 0;
+}
+
+channel_usage ()
+{
+    echo "
+ Sun Fire V60x and V65x - Linux 2.4
+   eth0 = channel 6, top
+   eth1 = channel 7, bottom
+
+ Sun Fire V60x and V65x - Linux 2.6
+   eth0 = channel 7, bottom
+   eth1 = channel 6, top
+
+ Sun Fire V60x and V65x - Solaris x86
+   e1000g0 = channel 7, bottom
+   e1000g1 = channel 6, top
+
+ Sun LX50 - Linux
+   eth0 = channel 7, bottom
+   eth1 = channel 6, top
+
+ Sun LX50 - Solaris x86
+   le0 = channel 7, bottom
+   le1 = channel 6, top
+
+ Sun Fire V20z (-i option does not apply)
+   channel 1
+"
+    exit 0
+}
+
+hex_to_ip ()
+{
+    test $# -ge 1 || return;
+    local HEX B1 B2 B3 B4;
+    HEX=`echo $1 | tr '[:lower:]' '[:upper:]'`;
+    H1=`echo $HEX | cut -c1-2`
+    H2=`echo $HEX | cut -c3-4`
+    H3=`echo $HEX | cut -c5-6`
+    H4=`echo $HEX | cut -c7-8`
+    B1=`echo 10 o 16 i $H1 p | dc`
+    B2=`echo 10 o 16 i $H2 p | dc`
+    B3=`echo 10 o 16 i $H3 p | dc`
+    B4=`echo 10 o 16 i $H4 p | dc`
+    echo "$B1.$B2.$B3.$B4"
+}
+
+ipmitool_lan_set ()
+{
+    [ $# -lt 1 ] && return
+    local PARAM=$1
+    local VALUE=
+    [ $# -ge 2 ] && VALUE=$2
+
+    if [ $DEBUG -gt 0 ]; then
+	echo "Setting LAN parameter $PARAM $VALUE"
+	echo "$IPMITOOL -I $IPMIINTF lan set $CHANNEL $PARAM $VALUE"
+	return
+    fi
+
+    $IPMITOOL -I $IPMIINTF lan set $CHANNEL $PARAM $VALUE
+}
+
+ipmitool_lan_reset ()
+{
+    ipmitool_lan_set "ipsrc" "static"
+    ipmitool_lan_set "ipaddr" "0.0.0.0"
+    ipmitool_lan_set "netmask" "0.0.0.0"
+    ipmitool_lan_set "macaddr" "00:00:00:00:00:00"
+    ipmitool_lan_set "defgw ipaddr" "0.0.0.0"
+    ipmitool_lan_set "defgw macaddr" "00:00:00:00:00:00"
+    ipmitool_lan_set "password"
+    ipmitool_lan_set "snmp" "public"
+    ipmitool_lan_set "arp generate" "off"
+    ipmitool_lan_set "access" "off"
+    exit 0
+}
+
+DEBUG=0
+LINUX=0
+SOLARIS=0
+CHANNEL=0
+IFACE=
+PASSWORD=
+SNMP=
+GRATARP=8
+PATH=$PATH:/bin:/sbin:/usr/bin:/usr/sbin
+
+case `uname -s` in
+    Linux)
+	IPMIINTF=open
+	IPMITOOL=ipmitool
+	PING=ping
+	IFCONFIG=ifconfig
+	ARP=arp
+	ROUTE=route
+	;;
+    SunOS)
+	IPMIINTF=lipmi
+	IPMITOOL=ipmiadm
+	PING=ping
+	IFCONFIG=ifconfig
+	ARP=arp
+	ROUTE=route
+	;;
+    *)
+	echo "Invalid OS!"
+	exit 1
+esac
+
+while getopts "dhri:c:m:p:s:a:v:w:x:y:z:" OPTION ; do
+    case "$OPTION" in
+	i) IFACE=$OPTARG ;;
+	c) CHANNEL=$OPTARG ; test X$CHANNEL = Xhelp && channel_usage ;;
+	m) IPMIINTF=$OPTARG ;;
+	p) PASSWORD=$OPTARG ;;
+	s) SNMP=$OPTARG ;;
+	a) GRATARP=$OPTARG ;;
+	d) DEBUG=1 ;;
+	v) IP_ADDRESS=$OPTARG ;;
+	w) IP_NETMASK=$OPTARG ;;
+	x) MAC_ADDRESS=$OPTARG ;;
+	y) GATEWAY_IP=$OPTARG ;;
+	z) GATEWAY_MAC=$OPTARG ;;
+	r) ipmitool_lan_reset ;;
+	h) usage ;;
+	*) echo "Ignoring invalid option : -$OPTARG" ;;
+    esac
+done
+
+if [ ! -x `which $IPMITOOL` ]; then
+    echo "Error: unable to find $IPMITOOL"
+    exit 1
+fi
+
+if [ $CHANNEL -eq 0 ]; then
+    echo
+    echo "Error: you must specify a channel with -c"
+    echo
+    exit 1
+fi
+
+if [ "$IFACE" ]; then
+    if ! $IFCONFIG $IFACE 2>/dev/null | grep "inet " >/dev/null 2>&1 ; then
+	echo
+	echo "Error: unable to find interface $IFACE"
+	echo
+	exit 1
+    fi
+    echo "Auto-configuring $IFACE (channel $CHANNEL)"
+fi
+
+case `uname -s` in
+    SunOS)
+	if [ X$IFACE != X ]; then
+	    if [ X$IP_ADDRESS = X ]; then
+		IP_ADDRESS=`$IFCONFIG $IFACE | grep inet | awk '{print $2}'`
+	    fi
+	    if [ X$IP_NETMASK = X ]; then
+		HEX_NETMASK=`$IFCONFIG $IFACE | grep netmask | awk '{print $4}'`
+		IP_NETMASK=`hex_to_ip $HEX_NETMASK`
+	    fi
+	    if [ X$MAC_ADDRESS = X ]; then
+		MAC_ADDRESS=`$IFCONFIG $IFACE | grep ether | awk '{print $2}'`
+	    fi
+	    if [ X$GATEWAY_IP = X ]; then
+		GATEWAY_IP=`$ROUTE -n get default | grep gateway: | awk '{print $2}'`
+	    fi
+	    if [ X$GATEWAY_MAC = X ]; then
+		$PING -i $IFACE $GATEWAY_IP 1 >/dev/null 2>&1
+		GATEWAY_MAC=`$ARP $GATEWAY_IP | awk '{print $4}'`
+		if [ X$GATEWAY_MAC = Xno ]; then
+		    GATEWAY_MAC=
+		fi
+	    fi
+	fi
+	;;
+
+    Linux)
+	if [ X$IFACE != X ]; then
+	    if [ X$IP_ADDRESS = X ]; then
+		IP_ADDRESS=`$IFCONFIG $IFACE | grep "inet addr" | awk -F"[:[:space:]]+" '{print $4}'`
+	    fi
+	    if [ X$IP_NETMASK = X ]; then
+		IP_NETMASK=`$IFCONFIG $IFACE | grep Bcast | awk -F"[:[:space:]]+" '{print $8}'`
+	    fi
+	    if [ X$MAC_ADDRESS = X ]; then
+		MAC_ADDRESS=`$IFCONFIG $IFACE | grep HWaddr | awk '{print $5}'`
+	    fi
+	    if [ X$GATEWAY_IP = X ]; then
+		GATEWAY_IP=`$ROUTE -n | awk '/^0.0.0.0/ {print $2}'`
+	    fi
+	    if [ X$GATEWAY_MAC = X ]; then
+		$PING -q -c1 $GATEWAY_IP >/dev/null 2>&1
+		GATEWAY_MAC=`$ARP -an | grep "$GATEWAY_IP[^0-9]" | awk '{print $4}'`
+	    fi
+	fi
+	;;
+esac
+
+if [ X$IP_ADDRESS != X ]; then
+    ipmitool_lan_set "ipsrc" "static"
+    ipmitool_lan_set "ipaddr" "$IP_ADDRESS"
+fi
+
+if [ X$IP_NETMASK != X ]; then
+    ipmitool_lan_set "netmask" "$IP_NETMASK"
+fi
+
+if [ X$MAC_ADDRESS != X ]; then
+    ipmitool_lan_set "macaddr" "$MAC_ADDRESS"
+fi
+
+if [ X$GATEWAY_IP != X ]; then
+    ipmitool_lan_set "defgw ipaddr" "$GATEWAY_IP"
+fi
+
+if [ X$GATEWAY_MAC != X ]; then
+    ipmitool_lan_set "defgw macaddr" "$GATEWAY_MAC"
+fi
+
+if [ X$PASSWORD != X ]; then
+    ipmitool_lan_set "password" "$PASSWORD"
+fi
+
+if [ X$SNMP != X ]; then
+    ipmitool_lan_set "snmp" "$SNMP"
+fi
+
+if [ "$GRATARP" -ne 0 ]; then
+    ipmitool_lan_set "arp generate" "on"
+    ipmitool_lan_set "arp interval" "$GRATARP"
+else
+    ipmitool_lan_set "arp generate" "off"
+fi
+
+echo "Setting channel authentication capabilities"
+ipmitool_lan_set "auth callback,user,operator,admin" "md2,md5"
+
+echo "Enabling channel $CHANNEL"
+ipmitool_lan_set "access" "on"
+ipmitool_lan_set "user"
+
+exit 0

ipmitool/contrib/collect_data.sh

@@ -0,0 +1,29 @@
+#!/bin/bash
+#
+#  Copyright (c) 2003 Fredrik Ohrn.  All Rights Reserved.
+#
+#  See the included COPYING file for license details.
+# 
+
+# Edit the variables
+
+hostname=$HOSTNAME
+
+ipmi_cmd="/usr/local/bin/ipmitool -I open"
+rrd_dir="/some/dir/rrd"
+
+# No need to edit below this point.
+
+IFS="
+"
+
+for line in `eval $ipmi_cmd -c sdr list full` ; do
+
+	IFS=,
+
+	split=($line)
+
+	file="$rrd_dir/$hostname-${split[0]}.rrd"
+
+	rrdupdate "$file" "N:${split[1]}"
+done

ipmitool/contrib/create_rrds.sh

@@ -0,0 +1,40 @@
+#!/bin/bash
+#
+#  Copyright (c) 2003 Fredrik Ohrn.  All Rights Reserved.
+#
+#  See the included COPYING file for license details.
+#
+
+# Edit the variables
+
+hostname=$HOSTNAME
+
+ipmi_cmd="/usr/local/bin/ipmitool -I open"
+rrd_dir="/some/dir/rrd"
+
+# No need to edit below this point.
+
+IFS="
+"
+
+for line in `eval $ipmi_cmd -c -v sdr list full` ; do
+
+	IFS=,
+
+	split=($line)
+
+	file="$rrd_dir/$hostname-${split[0]}.rrd"
+
+	if [ -e "$file" ] ; then
+		echo "Skipping existing file $file"
+		continue
+	fi
+
+	echo "Creating file $file"
+
+	rrdtool create "$file" \
+		--step 300 DS:var:GAUGE:900:${split[16]}:${split[17]} \
+		RRA:AVERAGE:0.5:1:288 \
+		RRA:AVERAGE:0.5:6:336 \
+		RRA:AVERAGE:0.5:12:720
+done

ipmitool/contrib/create_webpage.sh

@@ -0,0 +1,211 @@
+#!/bin/bash
+#
+#  Copyright (c) 2003-2004 Fredrik Ohrn.  All Rights Reserved.
+#
+#  See the included COPYING file for license details.
+#
+
+# Edit the variables
+
+hostname=$HOSTNAME
+
+ipmi_cmd="/usr/local/bin/ipmitool -I open"
+rrd_dir="/some/dir/rrd"
+
+# Full path to the rrdcgi executable.
+rrdcgi=/usr/local/bin/rrdcgi
+
+# Where should rrdcgi store the graphs? This path must be within the
+# document root and writable by the webserver user.
+img_dir=/usr/local/apache2/htdocs/images/graphs
+
+# Where will the graphs show up on the webserver?
+web_dir=/images/graphs
+
+# Size of graph area (excluding title, legends etc.)
+graph_width=500
+graph_height=150
+
+# Graphs to include on page
+graph_daily=1
+graph_weekly=1
+graph_monthly=0
+
+
+# No need to edit below this point.
+
+color[0]="2020FF"
+color[1]="20FF20"
+color[2]="FF2020"
+color[3]="FF21FF"
+color[4]="21FFFF"
+color[5]="FFFF21"
+color[6]="8F21FF"
+color[7]="21FF8F"
+color[8]="FF8F21"
+color[9]="FF2190"
+color[10]="2190FF"
+color[11]="90FF21"
+
+cat << EOF
+#!$rrdcgi
+<html>
+<head>
+<title>$hostname</title>
+<RRD::GOODFOR 300>
+<body>
+<h2>$hostname</h2>
+EOF
+
+
+IFS="
+"
+
+i=0
+groups=
+
+for line in `eval $ipmi_cmd -c -v sdr list full` ; do
+
+	IFS=,
+
+	split=($line)
+
+	file="$rrd_dir/$hostname-${split[0]}.rrd"
+	group=`echo "${split[2]} ${split[*]:10:6}" | tr ' .-' ___`
+
+	group_color=${group}_color
+
+	if [ -z "${!group}" ] ; then
+		groups="$groups $group"
+
+		declare $group_color=0
+
+		group_unit=${group}_unit
+		declare $group_unit="${split[2]}"
+
+		group_title=${group}_title
+		declare $group_title="${split[5]} / ${split[6]}"
+
+		group_thres=${group}_thres
+		declare $group_thres="${split[10]},${split[11]},${split[12]},${split[13]},${split[14]},${split[15]}"
+	fi
+
+	declare $group="${!group}
+  DEF:var$i=\"$file\":var:AVERAGE LINE1:var$i#${color[${!group_color}]}:\"${split[0]}\""
+
+	declare $group_color=$[ ${!group_color} + 1 ]
+
+	c=$[ c + 1 ]
+	i=$[ i + 1 ]
+done
+
+IFS=" "
+
+for group in $groups ; do
+
+	group_unit=${group}_unit
+	group_title=${group}_title
+	group_thres=${group}_thres
+
+	IFS=,
+
+	split=(${!group_thres})
+
+	thres=
+
+	if [ -n "${split[0]}" ] ; then
+		if [ -n "${split[3]}" ] ; then
+			thres="
+  HRULE:${split[0]}#000000
+  HRULE:${split[3]}#000000:\"Upper & lower non-recoverable thresholds\""
+		else
+			thres="
+  HRULE:${split[0]}#000000:\"Upper non-recoverable threshold\""
+		fi
+	else
+		if [ -n "${split[3]}" ] ; then
+			thres="
+  HRULE:${split[3]}#000000:\"Lower non-recoverable threshold\""
+		fi
+	fi
+
+	if [ -n "${split[1]}" ] ; then
+		if [ -n "${split[4]}" ] ; then
+			thres="$thres
+  HRULE:${split[1]}#FF0000
+  HRULE:${split[4]}#FF0000:\"Upper & lower critical thresholds\""
+		else
+			thres="$thres
+  HRULE:${split[1]}#FF0000:\"Upper critical threshold\""
+		fi
+	else
+		if [ -n "${split[4]}" ] ; then
+			thres="$thres
+  HRULE:${split[4]}#FF0000:\"Lower critical threshold\""
+		fi
+	fi
+
+	if [ -n "${split[2]}" ] ; then
+		if [ -n "${split[5]}" ] ; then
+			thres="$thres
+  HRULE:${split[2]}#FFCC00
+  HRULE:${split[5]}#FFCC00:\"Upper & lower warning thresholds\""
+		else
+			thres="$thres
+  HRULE:${split[2]}#FFCC00:\"Upper warning threshold\""
+		fi
+	else
+		if [ -n "${split[5]}" ] ; then
+			thres="$thres
+  HRULE:${split[5]}#FFCC00:\"Lower warning threshold\""
+		fi
+	fi
+
+	echo "<h3>${!group_title}</h3>"
+
+	if [ "$graph_daily" -ne 0 ] ; then
+		cat << EOF
+<RRD::GRAPH "$img_dir/$hostname-$group-daily.gif"
+  --imginfo "<img src="$web_dir/%s" width="%lu" height="%lu">"
+  --lazy
+  --vertical-label "${!group_unit}"
+  --title "Daily graph"
+  --height $graph_height
+  --width $graph_width ${!group} $thres
+>
+EOF
+	fi
+
+	if [ "$graph_weekly" -ne 0 ] ; then
+		cat << EOF
+<RRD::GRAPH "$img_dir/$hostname-$group-weekly.gif"
+  --imginfo "<img src="$web_dir/%s" width="%lu" height="%lu">"
+  --lazy
+  --start -7d
+  --vertical-label "${!group_unit}"
+  --title "Weelky graph"
+  --height $graph_height
+  --width $graph_width ${!group} $thres
+>
+EOF
+	fi
+
+	if [ "$graph_monthly" -ne 0 ] ; then
+		cat << EOF
+<RRD::GRAPH "$img_dir/$hostname-$group-monthly.gif"
+  --imginfo "<img src="$web_dir/%s" width="%lu" height="%lu">"
+  --lazy
+  --start -30d
+  --vertical-label "${!group_unit}"
+  --title "Monthly graph"
+  --height $graph_height
+  --width $graph_width ${!group} $thres
+>
+EOF
+	fi
+done
+
+cat << EOF
+</body>
+</html>
+EOF

ipmitool/contrib/create_webpage_compact.sh

@@ -0,0 +1,151 @@
+#!/bin/bash
+#
+#  Copyright (c) 2003-2004 Fredrik Ohrn.  All Rights Reserved.
+#
+#  See the included COPYING file for license details.
+#
+
+# Edit the variables
+
+hostname=$HOSTNAME
+
+ipmi_cmd="/usr/local/bin/ipmitool -I open"
+rrd_dir="/some/dir/rrd"
+
+# Full path to the rrdcgi executable.
+rrdcgi=/usr/local/bin/rrdcgi
+
+# Where should rrdcgi store the graphs? This path must be within the
+# document root and writable by the webserver user.
+img_dir=/usr/local/apache2/htdocs/images/graphs
+
+# Where will the graphs show up on the webserver?
+web_dir=/images/graphs
+
+# Size of graph area (excluding title, legends etc.)
+graph_width=500
+graph_height=150
+
+# Graphs to include on page
+graph_daily=1
+graph_weekly=1
+graph_monthly=0
+
+
+# No need to edit below this point.
+
+color[0]="2020FF"
+color[1]="20FF20"
+color[2]="FF2020"
+color[3]="FF21FF"
+color[4]="21FFFF"
+color[5]="FFFF21"
+color[6]="8F21FF"
+color[7]="21FF8F"
+color[8]="FF8F21"
+color[9]="FF2190"
+color[10]="2190FF"
+color[11]="90FF21"
+
+cat << EOF
+#!$rrdcgi
+<html>
+<head>
+<title>$hostname</title>
+<RRD::GOODFOR 300>
+<body>
+<h2>$hostname</h2>
+EOF
+
+
+IFS="
+"
+
+i=0
+groups=
+
+for line in `eval $ipmi_cmd -c -v sdr list full` ; do
+
+	IFS=,
+
+	split=($line)
+
+	file="$rrd_dir/$hostname-${split[0]}.rrd"
+	group=`echo "${split[2]}" | tr ' .-' ___`
+
+	group_color=${group}_color
+
+	if [ -z "${!group}" ] ; then
+		groups="$groups $group"
+
+		declare $group_color=0
+
+		group_unit=${group}_unit
+		declare $group_unit="${split[2]}"
+	fi
+
+	declare $group="${!group}
+  DEF:var$i=\"$file\":var:AVERAGE LINE1:var$i#${color[${!group_color}]}:\"${split[0]}\""
+
+	declare $group_color=$[ ${!group_color} + 1 ]
+
+	c=$[ c + 1 ]
+	i=$[ i + 1 ]
+done
+
+IFS=" "
+
+for group in $groups ; do
+
+	group_unit=${group}_unit
+
+	IFS=,
+
+	echo "<h3>${!group_unit}</h3>"
+
+	if [ "$graph_daily" -ne 0 ] ; then
+		cat << EOF
+<RRD::GRAPH "$img_dir/$hostname-$group-daily.gif"
+  --imginfo "<img src="$web_dir/%s" width="%lu" height="%lu">"
+  --lazy
+  --vertical-label "${!group_unit}"
+  --title "Daily graph"
+  --height $graph_height
+  --width $graph_width ${!group}
+>
+EOF
+	fi
+
+	if [ "$graph_weekly" -ne 0 ] ; then
+		cat << EOF
+<RRD::GRAPH "$img_dir/$hostname-$group-weekly.gif"
+  --imginfo "<img src="$web_dir/%s" width="%lu" height="%lu">"
+  --lazy
+  --start -7d
+  --vertical-label "${!group_unit}"
+  --title "Weelky graph"
+  --height $graph_height
+  --width $graph_width ${!group}
+>
+EOF
+	fi
+
+	if [ "$graph_monthly" -ne 0 ] ; then
+		cat << EOF
+<RRD::GRAPH "$img_dir/$hostname-$group-monthly.gif"
+  --imginfo "<img src="$web_dir/%s" width="%lu" height="%lu">"
+  --lazy
+  --start -30d
+  --vertical-label "${!group_unit}"
+  --title "Monthly graph"
+  --height $graph_height
+  --width $graph_width ${!group}
+>
+EOF
+	fi
+done
+
+cat << EOF
+</body>
+</html>
+EOF

ipmitool/contrib/ipmi.init.basic

@@ -0,0 +1,17 @@
+#!/bin/sh
+
+echo "Setting up OpenIPMI driver..."
+
+# load the ipmi modules
+modprobe ipmi_msghandler
+modprobe ipmi_devintf
+if ! modprobe ipmi_kcs_drv ; then
+	modprobe ipmi_si # try new module name
+fi
+
+maj=$(cat /proc/devices | awk '/ipmidev/{print $1}')
+if [ "$maj" ]; then
+    test -e /dev/ipmi0 && rm -f /dev/ipmi0
+    /bin/mknod /dev/ipmi0 c $maj 0
+fi
+

ipmitool/contrib/ipmi.init.redhat

@@ -0,0 +1,222 @@
+#!/bin/sh
+#
+# chkconfig: 2345 11 60
+# description: start, stop, or query ipmi system monitoring tools
+# config: /etc/sysconfig/ipmi
+#
+# For Redhat, Fedora, or similar systems.  Handles both 2.4 and 2.6
+# configurations.  Requires an /etc/sysconfig/ipmi file to function,
+# see below.
+#
+# Phil Hollenback
+# philiph@pobox.com
+
+# Source function library.
+. /etc/init.d/functions
+
+# Exit silently if we don't have a sysconfig file,
+# and read IPMI setting from it to determine whether or
+# not to continue.
+# The only current setting is ipmi={YES|NO}, whether or not
+# to enable IPMI.
+[ -f /etc/sysconfig/ipmi ] || exit 0
+. /etc/sysconfig/ipmi
+[ "${IPMI}" = "yes" ] || exit 0
+
+RETVAL=0
+
+start() {
+	echo -n $"Starting ipmi: "
+
+	# If ipmidev isn't listed in /proc/devices, try
+	# loading the modules.
+	if ! grep -q ipmidev /proc/devices
+	then
+	    /sbin/modprobe ipmi_msghandler || RETVAL=1
+	    /sbin/modprobe ipmi_devintf || RETVAL=1
+	    # Try loading new driver module, fall back to old
+	    # module if that fails.
+	    if ! /sbin/modprobe ipmi_si >/dev/null 2>&1
+	    then
+		/sbin/modprobe ipmi_kcs_drv || RETVAL=1
+	    fi
+	fi
+
+
+	# If ipmidev still isn't listed in /proc/devices after we load
+	# modules, this just isn't going to work.  Set RETVAL to mark
+	# this failure.
+	grep -q ipmidev /proc/devices || RETVAL=1
+
+	# remove old device file always
+	# in case ipmi gets assigned new dynamic major number from kernel
+	if [ -c /dev/ipmi0 ]; then
+	    rm -f /dev/ipmi0
+	fi
+
+	# Check if the device file exists and create if not.
+	if [ ! -c /dev/ipmi0 ] && [ $RETVAL -eq 0 ]
+	then
+	    major=$(awk '/ ipmidev$/{print $1}' /proc/devices)
+	    /bin/mknod -m 0600 /dev/ipmi0 c $major 0 || RETVAL=1
+	fi
+
+	if [ $RETVAL -eq 0 ] && touch /var/lock/subsys/ipmi ; then
+		echo_success
+		echo
+	else
+		echo_failure
+		echo
+	fi
+}
+
+stop() {
+	echo -n $"Shutting down ipmi: "
+
+	# Stop doesn't actually do anything because we currently don't
+	# unload ipmi modules on stop.  That might change in the future
+ 	# if we decide unloading the ipmi modules is safe.
+	RETVAL=0
+
+	if [ $RETVAL -eq 0 ] && rm -f /var/lock/subsys/ipmi ; then
+		echo_success
+		echo
+	else
+		echo_failure
+		echo
+	fi
+}
+
+dostatus() {
+	# Extract cpu temperatures from ipmitool output.
+
+	# Abort if we don't have the ipmitool program.
+	if ! /usr/bin/ipmitool -V >/dev/null
+	then
+	    echo "/usr/bin/ipmitool not found!" >&2
+	    exit 1
+	fi
+
+	# Abort if ipmi isn't loaded.
+	if ! grep -q ipmidev /proc/devices
+	then
+	    echo "ipmi not listed in /proc/devices!" >&2
+	    exit 1
+	fi
+
+	# Check if we are running on a v1.0 IPMI system, and
+	# change our processor search string appropriately.
+	if /usr/bin/ipmitool -I open bmc info | \
+		grep -q "IPMI Version.*1.0"
+	then
+	    IpmiVersion="1.0"
+	fi
+
+	# Determine # of running processors
+	NumProcs=$(grep -c processor /proc/cpuinfo)
+	if [ $NumProcs -eq 0 ]
+	then
+	    echo "Can't determine number of processors!" >&2
+	    exit 1
+	fi
+
+	# Now build the query string.  Concatenate it into
+	# one string because that's more efficient on 2.4 systems.
+	Count=1
+	TempString=""
+	while [ $Count -le $NumProcs ]
+	do
+	    if [ x$IpmiVersion  = x"1.0" ]
+	    then
+		TempString="$TempString CPU\ $Count"
+	    else
+		TempString="$TempString Processor$Count\ Temp"
+	    fi
+	    Count=$((Count + 1))
+	done
+	# building TempString like this and eval'ing it is ugly, but
+	# it's the only way I could make the quoting work.  Sorry.
+	TempString="/usr/bin/ipmitool -I open sensor get $TempString"
+	eval $TempString | awk -v "c=$Count" '
+BEGIN {
+   n = 1
+}
+/Sensor Reading/ {
+   printf "CPU%s Temp: %s\n",n,$4
+   n++
+}
+END {
+   if ( n != c) {
+	printf "Error: found %s CPUs, but got temps for %s\n",--c,--n >"/dev/stderr"
+	exit 1
+   }
+   exit 0
+}'
+	RETVAL=$((RETVAL + $?))
+	return $RETVAL
+}
+
+restart() {
+	stop
+	start
+	RETVAL=$?
+}
+
+condrestart() {
+	[ -e /var/lock/subsys/ipmi ] && restart || :
+}
+
+remove () {
+	# Actually remove the drivers.  Don't do during stop in case
+	# this causes system to become unstable (a la lm_sensors)
+	if /sbin/lsmod | awk '{print $1}' | grep -q ipmi_
+	then
+	    # Try removing both 2.4 and 2.6 modules.
+	    /sbin/rmmod ipmi_si 2>/dev/null
+	    /sbin/rmmod ipmi_kcs_drv 2>/dev/null
+	    /sbin/rmmod ipmi_devintf
+	    /sbin/rmmod ipmi_msghandler
+	else
+	    echo "No ipmi modules loaded!" >&2
+	    RETVAL=1
+	    return $RETVAL
+	fi
+
+	# Wait a sec to give modules time to unload.
+	sleep 1
+
+	# Check if we failed to remove any modules, and complain if so.
+	if /sbin/lsmod | awk '{print $1}' | grep -q ipmi_
+	then
+	    echo "ipmi modules still loaded!" >&2
+	    RETVAL=1
+	    return $RETVAL
+	fi
+}
+
+# See how we were called.
+case "$1" in
+  start)
+	start
+	;;
+  stop)
+	stop
+	;;
+  status)
+	dostatus
+	;;
+  restart|reload)
+	restart
+	;;
+  condrestart)
+	condrestart
+	;;
+  remove)
+	remove
+	;;
+  *)
+	echo "Usage: ipmi {start|stop|status|restart|condrestart|remove}"
+	exit 1
+esac
+
+exit $RETVAL

ipmitool/contrib/ipmievd.init.debian

@@ -0,0 +1,92 @@
+#! /bin/sh
+### BEGIN INIT INFO
+# Provides:          ipmievd
+# Required-Start:    $local_fs $remote_fs $syslog
+# Required-Stop:     $local_fs $remote_fs $syslog
+# Default-Start:     2 3 4 5
+# Default-Stop:      S 0 1 6
+# Short-Description: IPMI event daemon
+# Description:       ipmievd  is a daemon which will listen for events
+#                    from the BMC that are being sent to the SEL and
+#                    also log those messages to syslog.
+### END INIT INFO
+#
+# Author:	Elmar Hoffmann <elho@elho.net>
+# Licence:      This script is public domain using the same
+#               licence as ipmitool itself.
+# Modified by:  Petter Reinholdtsen
+
+set -e
+
+PATH=/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin
+DESC="IPMI event daemon"
+NAME=ipmievd
+DAEMON=/usr/sbin/$NAME
+PIDFILE=/var/run/$NAME.pid
+SCRIPTNAME=/etc/init.d/$NAME
+
+# Gracefully exit if the package has been removed.
+test -x $DAEMON || exit 0
+
+. /lib/lsb/init-functions
+. /etc/default/rcS
+
+# Options used by ipmievd.
+#
+# "open" uses the asynchronous event notification from the OpenIPMI
+# kernel driver, "sel" uses active polling of the contents of the SEL
+# for new events.
+#
+# Need to force 'daemon' mode, to make sure messages are sent to
+# syslog and the program forks into the background.
+#
+# Se ipmievd(8) for more info.
+IPMIEVD_OPTIONS="open daemon"
+
+# Read config file if it is present.
+[ -f /etc/default/$NAME ] && . /etc/default/$NAME
+
+#
+#	Function that starts the daemon/service.
+#
+d_start() {
+	start-stop-daemon --start --quiet --exec $DAEMON -- $IPMIEVD_OPTIONS
+}
+
+#
+#	Function that stops the daemon/service.
+#
+d_stop() {
+	start-stop-daemon --stop --quiet --name $NAME --exec $DAEMON
+}
+
+CODE=0
+
+case "$1" in
+  start)
+	[ "$VERBOSE" != no ] && log_begin_msg "Starting $DESC" "$NAME"
+	d_start || CODE=$?
+	[ "$VERBOSE" != no ] && log_end_msg $CODE
+	exit $CODE
+	;;
+  stop)
+	log_begin_msg "Stopping $DESC" "$NAME"
+	d_stop || CODE=$?
+	log_end_msg $CODE
+	exit $CODE
+	;;
+  restart|force-reload)
+	log_begin_msg "Restarting $DESC" "$NAME"
+	d_stop || true
+	sleep 1
+	d_start || CODE=$?
+	log_end_msg $CODE
+	exit $CODE
+	;;
+  *)
+	echo "Usage: $SCRIPTNAME {start|stop|restart|force-reload}" >&2
+	exit 1
+	;;
+esac
+
+exit 0

ipmitool/contrib/ipmievd.init.redhat

@@ -0,0 +1,87 @@
+#!/bin/bash
+#
+#	/etc/rc.d/init.d/ipmievd
+#
+#       Based on example sysvinitfiles script
+#       Copyright (c) 2000 Red Hat Software, Inc.
+#
+# chkconfig: 345 99 00
+# description: ipmievd daemon to send events to syslog
+# processname: ipmievd
+# config:      /etc/sysconfig/ipmievd
+#
+### BEGIN INIT INFO
+# Provides:          ipmievd
+# Required-Start:    $syslog ipmi
+# Should-Start: $time
+# Required-Stop:     $syslog ipmi
+# Should-Stop: $time
+# Default-Start:     3 4 5
+# Default-Stop:      0 1 2 6
+# Short-Description: ipmievd daemon to send events to syslog
+# Description:       Start ipmievd to read events from BMC and
+#	             log them to syslog.  Events correspond to hardware faults,
+#	             state transitions such as power on and off, and sensor
+#	             readings such as temperature, voltage and fan speed that
+#	             are abnormal.
+### END INIT INFO
+
+IPMIEVD_BIN=/usr/sbin/ipmievd
+test -x $IPMIEVD_BIN || { echo "$IPMIEVD_BIN not installed";
+        if [ "$1" = "stop" ]; then exit 0;
+        else exit 5; fi; }
+
+# Check for existence of needed config file
+IPMIEVD_CONFIG=/etc/sysconfig/ipmievd
+test -r $IPMIEVD_CONFIG || { echo "$IPMIEVD_CONFIG does not exist";
+        if [ "$1" = "stop" ]; then exit 0;
+        else exit 6; fi; }
+
+# Read config file
+. $IPMIEVD_CONFIG
+
+# Source function library.
+. /etc/init.d/functions
+
+start() {
+	echo "Starting ipmievd:"
+	if [ -f /var/lock/subsys/ipmievd ]; then
+		return 0
+	fi
+	daemon $IPMIEVD_BIN $IPMIEVD_OPTIONS
+	ret=$?
+	[ $ret -eq 0 ] && touch /var/lock/subsys/ipmievd
+	return $ret
+}	
+
+stop() {
+	echo "Shutting down ipmievd:"
+	killproc $IPMIEVD_BIN
+	ret=$?
+	[ $ret -eq 0 ] && rm -f /var/lock/subsys/ipmievd
+	return $ret
+}
+
+case "$1" in
+    start)
+	start
+	;;
+    stop)
+	stop
+	;;
+    status)
+	status $IPMIEVD_BIN
+	;;
+    restart|reload)
+    	stop
+	start
+	;;
+    condrestart)
+	[ -f /var/lock/subsys/ipmievd ] && restart || :
+	;;
+    *)
+	echo "Usage: ipmievd {start|stop|status|reload|restart|condrestart}"
+	exit 1
+	;;
+esac
+exit $?

ipmitool/contrib/ipmievd.init.suse

@@ -0,0 +1,212 @@
+#!/bin/bash
+#
+#     System startup script for ipmievd
+#     Based on skeleton.compat example script
+#     Copyright (C) 1995--2005  Kurt Garloff, SUSE / Novell Inc.
+#          
+#     This library is free software; you can redistribute it and/or modify it
+#     under the terms of the GNU Lesser General Public License as published by
+#     the Free Software Foundation; either version 2.1 of the License, or (at
+#     your option) any later version.
+#			      
+#     This library is distributed in the hope that it will be useful, but
+#     WITHOUT ANY WARRANTY; without even the implied warranty of
+#     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+#     Lesser General Public License for more details.
+#      
+#     You should have received a copy of the GNU Lesser General Public
+#     License along with this library; if not, write to the Free Software
+#     Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307,
+#     USA.
+#
+# Note: This template uses functions rc_XXX defined in /etc/rc.status on
+# UnitedLinux/SUSE/Novell based Linux distributions. However, it will work
+# on other distributions as well, by using the LSB (Linux Standard Base) 
+# or RH functions or by open coding the needed functions.
+# Read http://www.tldp.org/HOWTO/HighQuality-Apps-HOWTO/ if you prefer not 
+# to use this template.
+#
+# chkconfig: 345 99 00
+# description: ipmievd daemon
+# 
+### BEGIN INIT INFO
+# Provides:          ipmievd
+# Required-Start:    $syslog ipmi
+# Should-Start: $time
+# Required-Stop:     $syslog ipmi
+# Should-Stop: $time
+# Default-Start:     3 4 5
+# Default-Stop:      0 1 2 6
+# Short-Description: ipmievd daemon to send events to syslog
+# Description:       Start ipmievd to read events from BMC and
+#	log them to syslog.  Events correspond to hardware faults,
+#	state transitions such as power on and off, and sensor
+#	readings such as temperature, voltage and fan speed that
+#	are abnormal.
+### END INIT INFO
+# 
+
+# Check for missing binaries (stale symlinks should not happen)
+# Note: Special treatment of stop for LSB conformance
+IPMIEVD_BIN=/usr/sbin/ipmievd
+test -x $IPMIEVD_BIN || { echo "$IPMIEVD_BIN not installed"; 
+	if [ "$1" = "stop" ]; then exit 0;
+	else exit 5; fi; }
+
+# Check for existence of needed config file and read it
+IPMIEVD_CONFIG=/etc/sysconfig/ipmievd
+test -r $IPMIEVD_CONFIG || { echo "$IPMIEVD_CONFIG does not exist";
+	if [ "$1" = "stop" ]; then exit 0;
+	else exit 6; fi; }
+
+# Read config	
+. $IPMIEVD_CONFIG
+
+if test -e /etc/rc.status; then
+    # SUSE rc script library
+    . /etc/rc.status
+else
+    export LC_ALL=POSIX
+    _cmd=$1
+    declare -a _SMSG
+    if test "${_cmd}" = "status"; then
+	_SMSG=(running dead dead unused unknown reserved)
+	_RC_UNUSED=3
+    else
+	_SMSG=(done failed failed missed failed skipped unused failed failed reserved)
+	_RC_UNUSED=6
+    fi
+    if test -e /lib/lsb/init-functions; then
+	# LSB    
+    	. /lib/lsb/init-functions
+	echo_rc()
+	{
+	    if test ${_RC_RV} = 0; then
+		log_success_msg "  [${_SMSG[${_RC_RV}]}] "
+	    else
+		log_failure_msg "  [${_SMSG[${_RC_RV}]}] "
+	    fi
+	}
+	# TODO: Add checking for lockfiles
+	checkproc() { return pidofproc ${1+"$@"} >/dev/null 2>&1; }
+    elif test -e /etc/init.d/functions; then
+	# RHAT
+	. /etc/init.d/functions
+	echo_rc()
+	{
+	    #echo -n "  [${_SMSG[${_RC_RV}]}] "
+	    if test ${_RC_RV} = 0; then
+		success "  [${_SMSG[${_RC_RV}]}] "
+	    else
+		failure "  [${_SMSG[${_RC_RV}]}] "
+	    fi
+	}
+	checkproc() { return status ${1+"$@"}; }
+	start_daemon() { return daemon ${1+"$@"}; }
+    else
+	# emulate it
+	echo_rc() { echo "  [${_SMSG[${_RC_RV}]}] "; }
+    fi
+    rc_reset() { _RC_RV=0; }
+    rc_failed()
+    {
+	if test -z "$1"; then 
+	    _RC_RV=1;
+	elif test "$1" != "0"; then 
+	    _RC_RV=$1; 
+    	fi
+	return ${_RC_RV}
+    }
+    rc_check()
+    {
+	return rc_failed $?
+    }	
+    rc_status()
+    {
+	rc_failed $?
+	if test "$1" = "-r"; then _RC_RV=0; shift; fi
+	if test "$1" = "-s"; then rc_failed 5; echo_rc; rc_failed 3; shift; fi
+	if test "$1" = "-u"; then rc_failed ${_RC_UNUSED}; echo_rc; rc_failed 3; shift; fi
+	if test "$1" = "-v"; then echo_rc; shift; fi
+	if test "$1" = "-r"; then _RC_RV=0; shift; fi
+	return ${_RC_RV}
+    }
+    rc_exit() { exit ${_RC_RV}; }
+    rc_active() 
+    {
+	if test -z "$RUNLEVEL"; then read RUNLEVEL REST < <(/sbin/runlevel); fi
+	if test -e /etc/init.d/S[0-9][0-9]${1}; then return 0; fi
+	return 1
+    }
+fi
+
+# Reset status of this service
+rc_reset
+
+# Return values acc. to LSB for all commands but status:
+# 0	  - success
+# 1       - generic or unspecified error
+# 2       - invalid or excess argument(s)
+# 3       - unimplemented feature (e.g. "reload")
+# 4       - user had insufficient privileges
+# 5       - program is not installed
+# 6       - program is not configured
+# 7       - program is not running
+# 8--199  - reserved (8--99 LSB, 100--149 distrib, 150--199 appl)
+# 
+# Note that starting an already running service, stopping
+# or restarting a not-running service as well as the restart
+# with force-reload (in case signaling is not supported) are
+# considered a success.
+
+case "$1" in
+    start)
+	echo -n "Starting ipmievd "
+	start_daemon $IPMIEVD_BIN $IPMIEVD_OPTIONS
+	rc_status -v
+	;;
+    stop)
+	echo -n "Shutting down ipmievd "
+	killproc -TERM $IPMIEVD_BIN
+	rc_status -v
+	;;
+    try-restart|condrestart)
+	## Do a restart only if the service was active before.
+	## Note: try-restart is now part of LSB (as of 1.9).
+	## RH has a similar command named condrestart.
+	if test "$1" = "condrestart"; then
+		echo "${attn} Use try-restart ${done}(LSB)${attn} rather than condrestart ${warn}(RH)${norm}"
+	fi
+	$0 status
+	if test $? = 0; then
+		$0 restart
+	else
+		rc_reset	# Not running is not a failure.
+	fi
+	rc_status
+	;;
+    restart)
+	$0 stop
+	$0 start
+	rc_status
+	;;
+    force-reload)
+	echo -n "Reload service ipmievd "
+	$0 try-restart
+	rc_status
+	;;
+    reload)
+	rc_failed 3
+	rc_status -v
+	;;
+    status)
+	echo -n "Checking for service ipmievd "
+	checkproc $IPMIEVD_BIN
+	rc_status -v
+	;;
+    *)
+	echo "Usage: $0 {start|stop|status|try-restart|restart|force-reload| reload}"
+	exit 1
+	;;
+esac
+rc_exit

ipmitool/contrib/oem_ibm_sel_map

@@ -0,0 +1,202 @@
+"0xC1","XX","XX","XX","XX","XX","XX","XX","0x02","0x04","Chassis Number","Memory Card","Completion Code (0x00=Success)","0x00","Memory hot replace event"
+"0xC1","XX","XX","XX","XX","XX","XX","XX","0x02","0x05","Chassis Number","Memory Card","Memory Size (in 512MB units)","0x00","Memory hot add event"
+"0xC1","XX","XX","XX","XX","XX","XX","XX","0x03","0x00","Chassis Number","Scalability Port Number","R","0x00","Scalability link down"
+"0xC1","XX","XX","XX","XX","XX","XX","XX","0x03","0x01","Chassis Number","Scalability Port Number","R","0x00","Scalability link up"
+"0xC1","XX","XX","XX","XX","XX","XX","XX","0x03","0x02","Chassis Number","Scalability Port Number","R","0x00","Scalability link double wide down"
+"0xC1","XX","XX","XX","XX","XX","XX","XX","0x03","0x03","Chassis Number","Scalability Port Number","R","0x00","Scalability link double wide up"
+"0xC1","XX","XX","XX","XX","XX","XX","XX","0x03","0x80","Chassis Number","Scalability Port Number","R","0x00","Scalability link PFA"
+"0xC1","XX","XX","XX","XX","XX","XX","XX","0x03","0x81","Chassis Number","Scalability Port Number","R","0x00","Scalability link invalid port"
+"0xC1","XX","XX","XX","XX","XX","XX","XX","0x03","0x82","Chassis Number","Scalability Port Number","R","0x00","Scalability link invalid node"
+"0xC1","XX","XX","XX","XX","XX","XX","XX","0x03","0x83","Chassis Number","Scalability Port Number","R","0x00","Scalability link kill"
+"0xE0","0x00","0x00","Chassis Number","Slot Number","Bus Number","Device ID (MSB)","Device ID (LSB)","Vendor ID (MSB)","Vendor ID (LSB)","R","R","R","0x00","Device OK"
+"0xE0","0x00","0x01","Chassis Number","Slot Number","Bus Number","Device ID (MSB)","Device ID (LSB)","Vendor ID (MSB)","Vendor ID (LSB)","R","R","R","0x00","Required ROM space not available"
+"0xE0","0x00","0x02","Chassis Number","Slot Number","Bus Number","Device ID (MSB)","Device ID (LSB)","Vendor ID (MSB)","Vendor ID (LSB)","R","R","R","0x00","Required I/O Space not available"
+"0xE0","0x00","0x03","Chassis Number","Slot Number","Bus Number","Device ID (MSB)","Device ID (LSB)","Vendor ID (MSB)","Vendor ID (LSB)","R","R","R","0x00","Required memory not available"
+"0xE0","0x00","0x04","Chassis Number","Slot Number","Bus Number","Device ID (MSB)","Device ID (LSB)","Vendor ID (MSB)","Vendor ID (LSB)","R","R","R","0x00","Required memory below 1MB not available"
+"0xE0","0x00","0x05","Chassis Number","Slot Number","Bus Number","Device ID (MSB)","Device ID (LSB)","Vendor ID (MSB)","Vendor ID (LSB)","R","R","R","0x00","ROM checksum failed"
+"0xE0","0x00","0x06","Chassis Number","Slot Number","Bus Number","Device ID (MSB)","Device ID (LSB)","Vendor ID (MSB)","Vendor ID (LSB)","R","R","R","0x00","BIST failed"
+"0xE0","0x00","0x07","Chassis Number","Slot Number","Bus Number","Device ID (MSB)","Device ID (LSB)","Vendor ID (MSB)","Vendor ID (LSB)","R","R","R","0x00","Planar device missing or disabled by user"
+"0xE0","0x00","0x08","Chassis Number","Slot Number","Bus Number","Device ID (MSB)","Device ID (LSB)","Vendor ID (MSB)","Vendor ID (LSB)","R","R","R","0x00","PCI device has an invalid PCI configuration space header"
+"0xE0","0x00","0x09","Chassis Number","Slot Number","Bus Number","Device ID (MSB)","Device ID (LSB)","Vendor ID (MSB)","Vendor ID (LSB)","R","R","R","0x00","FRU information for added PCI device"
+"0xE0","0x00","0x0A","Chassis Number","Slot Number","Bus Number","Device ID (MSB)","Device ID (LSB)","Vendor ID (MSB)","Vendor ID (LSB)","R","R","R","0x00","FRU information for removed PCI device"
+"0xE0","0x00","0x0B","Chassis Number","Slot Number","Bus Number","Device ID (MSB)","Device ID (LSB)","Vendor ID (MSB)","Vendor ID (LSB)","R","R","R","0x00","A PCI device was added, PCI FRU information is stored in next log entry"
+"0xE0","0x00","0x0C","Chassis Number","Slot Number","Bus Number","Device ID (MSB)","Device ID (LSB)","Vendor ID (MSB)","Vendor ID (LSB)","R","R","R","0x00","A PCI device was removed, PCI FRU information is stored in next log entry"
+"0xE0","0x00","0x0D","Chassis Number","Slot Number","Bus Number","Device ID (MSB)","Device ID (LSB)","Vendor ID (MSB)","Vendor ID (LSB)","R","R","R","0x00","Requested resources not available"
+"0xE0","0x00","0x0E","Chassis Number","Slot Number","Bus Number","Device ID (MSB)","Device ID (LSB)","Vendor ID (MSB)","Vendor ID (LSB)","R","R","R","0x00","Required I/O Space Not Available"
+"0xE0","0x00","0x0F","Chassis Number","Slot Number","Bus Number","Device ID (MSB)","Device ID (LSB)","Vendor ID (MSB)","Vendor ID (LSB)","R","R","R","0x00","Required I/O Space Not Available"
+"0xE0","0x00","0x10","Chassis Number","Slot Number","Bus Number","Device ID (MSB)","Device ID (LSB)","Vendor ID (MSB)","Vendor ID (LSB)","R","R","R","0x00","Required I/O Space Not Available"
+"0xE0","0x00","0x11","Chassis Number","Slot Number","Bus Number","Device ID (MSB)","Device ID (LSB)","Vendor ID (MSB)","Vendor ID (LSB)","R","R","R","0x00","Required I/O Space Not Available"
+"0xE0","0x00","0x12","Chassis Number","Slot Number","Bus Number","Device ID (MSB)","Device ID (LSB)","Vendor ID (MSB)","Vendor ID (LSB)","R","R","R","0x00","Required I/O Space Not Available"
+"0xE0","0x00","0x13","Chassis Number","Slot Number","Bus Number","Device ID (MSB)","Device ID (LSB)","Vendor ID (MSB)","Vendor ID (LSB)","R","R","R","0x00","Planar video disabled due to add in video card"
+"0xE0","0x00","0x14","Chassis Number","Slot Number","Bus Number","Device ID (MSB)","Device ID (LSB)","Vendor ID (MSB)","Vendor ID (LSB)","R","R","R","0x00","FRU information for PCI device partially disabled "
+"0xE0","0x00","0x15","Chassis Number","Slot Number","Bus Number","Device ID (MSB)","Device ID (LSB)","Vendor ID (MSB)","Vendor ID (LSB)","R","R","R","0x00","A PCI device was partially disabled, PCI FRU information is stored in next log entry"
+"0xE0","0x00","0x16","Chassis Number","Slot Number","Bus Number","Device ID (MSB)","Device ID (LSB)","Vendor ID (MSB)","Vendor ID (LSB)","R","R","R","0x00","A 33Mhz device is installed on a 66Mhz bus, PCI device information is stored in next log entry"
+"0xE0","0x00","0x17","Chassis Number","Slot Number","Bus Number","Device ID (MSB)","Device ID (LSB)","Vendor ID (MSB)","Vendor ID (LSB)","R","R","R","0x00","FRU information, 33Mhz device installed on 66Mhz bus"
+"0xE0","0x00","0x18","Chassis Number","Slot Number","Bus Number","Device ID (MSB)","Device ID (LSB)","Vendor ID (MSB)","Vendor ID (LSB)","R","R","R","0x00","Merge cable missing"
+"0xE0","0x00","0x19","Chassis Number","Slot Number","Bus Number","Device ID (MSB)","Device ID (LSB)","Vendor ID (MSB)","Vendor ID (LSB)","R","R","R","0x00","Node 1 to Node 2 cable missing"
+"0xE0","0x00","0x1A","Chassis Number","Slot Number","Bus Number","Device ID (MSB)","Device ID (LSB)","Vendor ID (MSB)","Vendor ID (LSB)","R","R","R","0x00","Node 1 to Node 3 cable missing"
+"0xE0","0x00","0x1B","Chassis Number","Slot Number","Bus Number","Device ID (MSB)","Device ID (LSB)","Vendor ID (MSB)","Vendor ID (LSB)","R","R","R","0x00","Node 2 to Node 3 cable missing"
+"0xE0","0x00","0x1C","Chassis Number","Slot Number","Bus Number","Device ID (MSB)","Device ID (LSB)","Vendor ID (MSB)","Vendor ID (LSB)","R","R","R","0x00","Nodes could not merge"
+"0xE0","0x00","0x1D","Chassis Number","Slot Number","Bus Number","Device ID (MSB)","Device ID (LSB)","Vendor ID (MSB)","Vendor ID (LSB)","R","R","R","0x00","No 8 way SMP cable"
+"0xE0","0x00","0x1E","Chassis Number","Slot Number","Bus Number","Device ID (MSB)","Device ID (LSB)","Vendor ID (MSB)","Vendor ID (LSB)","R","R","R","0x00","Primary North Bridge to PCI Host Bridge IB Link has failed"
+"0xE0","0x00","0x1F","Chassis Number","Slot Number","Bus Number","Device ID (MSB)","Device ID (LSB)","Vendor ID (MSB)","Vendor ID (LSB)","R","R","R","0x00","Redundant PCI Host Bridge IB Link has failed"
+"0xE0","0x00","0x00","Chassis Number","Slot Number","Bus Number","Device ID (LSB)","Device ID (MSB)","Vendor ID (LSB)","Vendor ID (MSB)","R","R","R","0x01","Device OK"
+"0xE0","0x00","0x01","Chassis Number","Slot Number","Bus Number","Device ID (LSB)","Device ID (MSB)","Vendor ID (LSB)","Vendor ID (MSB)","R","R","R","0x01","Required ROM space not available"
+"0xE0","0x00","0x02","Chassis Number","Slot Number","Bus Number","Device ID (LSB)","Device ID (MSB)","Vendor ID (LSB)","Vendor ID (MSB)","R","R","R","0x01","Required I/O Space not available"
+"0xE0","0x00","0x03","Chassis Number","Slot Number","Bus Number","Device ID (LSB)","Device ID (MSB)","Vendor ID (LSB)","Vendor ID (MSB)","R","R","R","0x01","Required memory not available"
+"0xE0","0x00","0x04","Chassis Number","Slot Number","Bus Number","Device ID (LSB)","Device ID (MSB)","Vendor ID (LSB)","Vendor ID (MSB)","R","R","R","0x01","Required memory below 1MB not available"
+"0xE0","0x00","0x05","Chassis Number","Slot Number","Bus Number","Device ID (LSB)","Device ID (MSB)","Vendor ID (LSB)","Vendor ID (MSB)","R","R","R","0x01","ROM checksum failed"
+"0xE0","0x00","0x06","Chassis Number","Slot Number","Bus Number","Device ID (LSB)","Device ID (MSB)","Vendor ID (LSB)","Vendor ID (MSB)","R","R","R","0x01","BIST failed"
+"0xE0","0x00","0x07","Chassis Number","Slot Number","Bus Number","Device ID (LSB)","Device ID (MSB)","Vendor ID (LSB)","Vendor ID (MSB)","R","R","R","0x01","Planar device missing or disabled by user"
+"0xE0","0x00","0x08","Chassis Number","Slot Number","Bus Number","Device ID (LSB)","Device ID (MSB)","Vendor ID (LSB)","Vendor ID (MSB)","R","R","R","0x01","PCI device has an invalid PCI configuration space header"
+"0xE0","0x00","0x09","Chassis Number","Slot Number","Bus Number","Device ID (LSB)","Device ID (MSB)","Vendor ID (LSB)","Vendor ID (MSB)","R","R","R","0x01","FRU information for added PCI device"
+"0xE0","0x00","0x0A","Chassis Number","Slot Number","Bus Number","Device ID (LSB)","Device ID (MSB)","Vendor ID (LSB)","Vendor ID (MSB)","R","R","R","0x01","FRU information for removed PCI device"
+"0xE0","0x00","0x0B","Chassis Number","Slot Number","Bus Number","Device ID (LSB)","Device ID (MSB)","Vendor ID (LSB)","Vendor ID (MSB)","R","R","R","0x01","A PCI device was added, PCI FRU information is stored in next log entry"
+"0xE0","0x00","0x0C","Chassis Number","Slot Number","Bus Number","Device ID (LSB)","Device ID (MSB)","Vendor ID (LSB)","Vendor ID (MSB)","R","R","R","0x01","A PCI device was removed, PCI FRU information is stored in next log entry"
+"0xE0","0x00","0x0D","Chassis Number","Slot Number","Bus Number","Device ID (LSB)","Device ID (MSB)","Vendor ID (LSB)","Vendor ID (MSB)","R","R","R","0x01","Requested resources not available"
+"0xE0","0x00","0x0E","Chassis Number","Slot Number","Bus Number","Device ID (LSB)","Device ID (MSB)","Vendor ID (LSB)","Vendor ID (MSB)","R","R","R","0x01","Required I/O Space Not Available"
+"0xE0","0x00","0x0F","Chassis Number","Slot Number","Bus Number","Device ID (LSB)","Device ID (MSB)","Vendor ID (LSB)","Vendor ID (MSB)","R","R","R","0x01","Required I/O Space Not Available"
+"0xE0","0x00","0x10","Chassis Number","Slot Number","Bus Number","Device ID (LSB)","Device ID (MSB)","Vendor ID (LSB)","Vendor ID (MSB)","R","R","R","0x01","Required I/O Space Not Available"
+"0xE0","0x00","0x11","Chassis Number","Slot Number","Bus Number","Device ID (LSB)","Device ID (MSB)","Vendor ID (LSB)","Vendor ID (MSB)","R","R","R","0x01","Required I/O Space Not Available"
+"0xE0","0x00","0x12","Chassis Number","Slot Number","Bus Number","Device ID (LSB)","Device ID (MSB)","Vendor ID (LSB)","Vendor ID (MSB)","R","R","R","0x01","Required I/O Space Not Available"
+"0xE0","0x00","0x13","Chassis Number","Slot Number","Bus Number","Device ID (LSB)","Device ID (MSB)","Vendor ID (LSB)","Vendor ID (MSB)","R","R","R","0x01","Planar video disabled due to add in video card"
+"0xE0","0x00","0x14","Chassis Number","Slot Number","Bus Number","Device ID (LSB)","Device ID (MSB)","Vendor ID (LSB)","Vendor ID (MSB)","R","R","R","0x01","FRU information for PCI device partially disabled "
+"0xE0","0x00","0x15","Chassis Number","Slot Number","Bus Number","Device ID (LSB)","Device ID (MSB)","Vendor ID (LSB)","Vendor ID (MSB)","R","R","R","0x01","A PCI device was partially disabled, PCI FRU information is stored in next log entry"
+"0xE0","0x00","0x16","Chassis Number","Slot Number","Bus Number","Device ID (LSB)","Device ID (MSB)","Vendor ID (LSB)","Vendor ID (MSB)","R","R","R","0x01","A 33Mhz device is installed on a 66Mhz bus, PCI device information is stored in next log entry"
+"0xE0","0x00","0x17","Chassis Number","Slot Number","Bus Number","Device ID (LSB)","Device ID (MSB)","Vendor ID (LSB)","Vendor ID (MSB)","R","R","R","0x01","FRU information, 33Mhz device installed on 66Mhz bus"
+"0xE0","0x00","0x18","Chassis Number","Slot Number","Bus Number","Device ID (LSB)","Device ID (MSB)","Vendor ID (LSB)","Vendor ID (MSB)","R","R","R","0x01","Merge cable missing"
+"0xE0","0x00","0x19","Chassis Number","Slot Number","Bus Number","Device ID (LSB)","Device ID (MSB)","Vendor ID (LSB)","Vendor ID (MSB)","R","R","R","0x01","Node 1 to Node 2 cable missing"
+"0xE0","0x00","0x1A","Chassis Number","Slot Number","Bus Number","Device ID (LSB)","Device ID (MSB)","Vendor ID (LSB)","Vendor ID (MSB)","R","R","R","0x01","Node 1 to Node 3 cable missing"
+"0xE0","0x00","0x1B","Chassis Number","Slot Number","Bus Number","Device ID (LSB)","Device ID (MSB)","Vendor ID (LSB)","Vendor ID (MSB)","R","R","R","0x01","Node 2 to Node 3 cable missing"
+"0xE0","0x00","0x1C","Chassis Number","Slot Number","Bus Number","Device ID (LSB)","Device ID (MSB)","Vendor ID (LSB)","Vendor ID (MSB)","R","R","R","0x01","Nodes could not merge"
+"0xE0","0x00","0x1D","Chassis Number","Slot Number","Bus Number","Device ID (LSB)","Device ID (MSB)","Vendor ID (LSB)","Vendor ID (MSB)","R","R","R","0x01","No 8 way SMP cable"
+"0xE0","0x00","0x1E","Chassis Number","Slot Number","Bus Number","Device ID (LSB)","Device ID (MSB)","Vendor ID (LSB)","Vendor ID (MSB)","R","R","R","0x01","Primary North Bridge to PCI Host Bridge IB Link has failed"
+"0xE0","0x00","0x1F","Chassis Number","Slot Number","Bus Number","Device ID (LSB)","Device ID (MSB)","Vendor ID (LSB)","Vendor ID (MSB)","R","R","R","0x01","Redundant PCI Host Bridge IB Link has failed"
+"0xE0","0x01","0x00","Chassis Number","Processor Number","R","R","R","R","R","R","R","R","0x00","Processor has failed BIST"
+"0xE0","0x01","0x01","Chassis Number","Processor Number","R","R","R","R","R","R","R","R","0x00","Unable to apply processor microcode update"
+"0xE0","0x01","0x02","Chassis Number","Processor Number","R","R","R","R","R","R","R","R","0x00","POST does not support current stepping level of processor"
+"0xE0","0x01","0x03","Chassis Number","Processor Number","R","R","R","R","R","R","R","R","0x00","CPU mismatch detected"
+"0xE0","0x02","0x00","Chassis Number","Memory Card","Memory DIMM","R","R","R","R","R","R","R","0x00","Uncorrectable memory error occurred"
+"0xE0","0x02","0x01","Chassis Number","Memory Card","Memory DIMM","Failing Symbol","R","R","R","R","R","R","0x00","Correctable memory threshold occurred"
+"0xE0","0x02","0x02","0x00","Chassis","Memory Card","Memory DIMM","R","R","R","R","R","R","0x00","DIMM enabled"
+"0xE0","0x02","0x02 ","0x01","Chassis","Memory Card","Memory DIMM","R","R","R","R","R","R","0x00","DIMM disabled, failed ECC test"
+"0xE0","0x02","0x02 ","0x02","Chassis","Memory Card","Memory DIMM","R","R","R","R","R","R","0x00","DIMM disabled, failed POST/BIOS memory test"
+"0xE0","0x02","0x02 ","0x03","Chassis","Memory Card","Memory DIMM","R","R","R","R","R","R","0x00","DIMM disabled, non-supported memory device"
+"0xE0","0x02","0x02 ","0x04","Chassis","Memory Card","Memory DIMM","R","R","R","R","R","R","0x00","DIMM disabled, non-matching or missing DIMM(s)"
+"0xE0","0x03","0x00","Chassis Number","Memory Card","R","R","R","R","R","R","R","R","0x00","Memory card enabled"
+"0xE0","0x03","0x00","Chassis Number","Memory Card","R","R","R","R","R","R","R","R","0x00","Memory card disabled"
+"0xE0","0x02","0x00","0x00","Chassis","Memory Card","Memory DIMM","R","R","R","R","R","R","0x01","DIMM enabled"
+"0xE0","0x02","0x00","0x01","Chassis","Memory Card","Memory DIMM","R","R","R","R","R","R","0x01","DIMM disabled, failed ECC test"
+"0xE0","0x02","0x00","0x02","Chassis","Memory Card","Memory DIMM","R","R","R","R","R","R","0x01","DIMM disabled, failed POST/BIOS memory test"
+"0xE0","0x02","0x00","0x03","Chassis","Memory Card","Memory DIMM","R","R","R","R","R","R","0x01","DIMM disabled, non-supported memory device"
+"0xE0","0x02","0x00","0x04","Chassis","Memory Card","Memory DIMM","R","R","R","R","R","R","0x01","DIMM disabled, non-matching or missing DIMM(s)"
+"0xE1","0x00","0x00","Chassis Number","Slot Number","Bus Number","Device ID (LSB)","Device ID (MSB)","Vendor ID (LSB)","Vendor ID (MSB)","Status Register (LSB)","Status Register (MSB)","DevFun Number","0x00","Unknown SERR/PERR detected on PCI bus"
+"0xE1","0x00","0x01","Chassis Number","Slot Number","Bus Number","Device ID (LSB)","Device ID (MSB)","Vendor ID (LSB)","Vendor ID (MSB)","Status Register (LSB)","Status Register (MSB)","DevFun Number","0x00","SERR: Address of special cycle DPE"
+"0xE1","0x00","0x02","Chassis Number","Slot Number","Bus Number","Device ID (LSB)","Device ID (MSB)","Vendor ID (LSB)","Vendor ID (MSB)","Status Register (LSB)","Status Register (MSB)","DevFun Number","0x00","PERR: Master read parity error"
+"0xE1","0x00","0x03","Chassis Number","Slot Number","Bus Number","Device ID (LSB)","Device ID (MSB)","Vendor ID (LSB)","Vendor ID (MSB)","Status Register (LSB)","Status Register (MSB)","DevFun Number","0x00","SERR: Received target parity error"
+"0xE1","0x00","0x04","Chassis Number","Slot Number","Bus Number","Device ID (LSB)","Device ID (MSB)","Vendor ID (LSB)","Vendor ID (MSB)","Status Register (LSB)","Status Register (MSB)","DevFun Number","0x00","PERR: Master write parity error"
+"0xE1","0x00","0x05","Chassis Number","Slot Number","Bus Number","Device ID (LSB)","Device ID (MSB)","Vendor ID (LSB)","Vendor ID (MSB)","Status Register (LSB)","Status Register (MSB)","DevFun Number","0x00","SERR: Device signaled SERR"
+"0xE1","0x00","0x06","Chassis Number","Slot Number","Bus Number","Device ID (LSB)","Device ID (MSB)","Vendor ID (LSB)","Vendor ID (MSB)","Status Register (LSB)","Status Register (MSB)","DevFun Number","0x00","PERR: Slave signaled parity error"
+"0xE1","0x00","0x07","Chassis Number","Slot Number","Bus Number","Device ID (LSB)","Device ID (MSB)","Vendor ID (LSB)","Vendor ID (MSB)","Status Register (LSB)","Status Register (MSB)","DevFun Number","0x00","SERR: Signaled Target Abort"
+"0xE1","0x00","0x08","Chassis Number","Slot Number","Bus Number","Device ID (LSB)","Device ID (MSB)","Vendor ID (LSB)","Vendor ID (MSB)","Status Register (LSB)","Status Register (MSB)","DevFun Number","0x00","PERR: Additional Correctable ECC Error"
+"0xE1","0x00","0x09","Chassis Number","Slot Number","Bus Number","Device ID (LSB)","Device ID (MSB)","Vendor ID (LSB)","Vendor ID (MSB)","Status Register (LSB)","Status Register (MSB)","DevFun Number","0x00","SERR: Received Master Abort"
+"0xE1","0x00","0x0A","Chassis Number","Slot Number","Bus Number","Device ID (LSB)","Device ID (MSB)","Vendor ID (LSB)","Vendor ID (MSB)","Status Register (LSB)","Status Register (MSB)","DevFun Number","0x00","PERR: Additional Uncorrectable ECC Error"
+"0xE1","0x00","0x0B","Chassis Number","Slot Number","Bus Number","Device ID (LSB)","Device ID (MSB)","Vendor ID (LSB)","Vendor ID (MSB)","Status Register (LSB)","Status Register (MSB)","DevFun Number","0x00","SERR: Split Completion Discarded"
+"0xE1","0x00","0x0C","Chassis Number","Slot Number","Bus Number","Device ID (LSB)","Device ID (MSB)","Vendor ID (LSB)","Vendor ID (MSB)","Status Register (LSB)","Status Register (MSB)","DevFun Number","0x00","PERR: Correctable ECC Error"
+"0xE1","0x00","0x0D","Chassis Number","Slot Number","Bus Number","Device ID (LSB)","Device ID (MSB)","Vendor ID (LSB)","Vendor ID (MSB)","Status Register (LSB)","Status Register (MSB)","DevFun Number","0x00","SERR: Unexpected Split Completion"
+"0xE1","0x00","0x0E","Chassis Number","Slot Number","Bus Number","Device ID (LSB)","Device ID (MSB)","Vendor ID (LSB)","Vendor ID (MSB)","Status Register (LSB)","Status Register (MSB)","DevFun Number","0x00","PERR: Uncorrectable ECC Error"
+"0xE1","0x00","0x0F","Chassis Number","Slot Number","Bus Number","Device ID (LSB)","Device ID (MSB)","Vendor ID (LSB)","Vendor ID (MSB)","Status Register (LSB)","Status Register (MSB)","DevFun Number","0x00","SERR: Received split completion error"
+"0xE1","0x00","0x11","Chassis Number","Slot Number","Bus Number","Device ID (LSB)","Device ID (MSB)","Vendor ID (LSB)","Vendor ID (MSB)","Status Register (LSB)","Status Register (MSB)","DevFun Number","0x00","SERR: PCI-PCI bridge secondary error: Address of special cycle DPE"
+"0xE1","0x00","0x12","Chassis Number","Slot Number","Bus Number","Device ID (LSB)","Device ID (MSB)","Vendor ID (LSB)","Vendor ID (MSB)","Status Register (LSB)","Status Register (MSB)","DevFun Number","0x00","PERR: PCI-PCI bridge secondary error: Master read parity error"
+"0xE1","0x00","0x13","Chassis Number","Slot Number","Bus Number","Device ID (LSB)","Device ID (MSB)","Vendor ID (LSB)","Vendor ID (MSB)","Status Register (LSB)","Status Register (MSB)","DevFun Number","0x00","SERR: PCI-PCI bridge secondary error: Received target parity error"
+"0xE1","0x00","0x14","Chassis Number","Slot Number","Bus Number","Device ID (LSB)","Device ID (MSB)","Vendor ID (LSB)","Vendor ID (MSB)","Status Register (LSB)","Status Register (MSB)","DevFun Number","0x00","PERR: PCI-PCI bridge secondary error: Master write parity error"
+"0xE1","0x00","0x15","Chassis Number","Slot Number","Bus Number","Device ID (LSB)","Device ID (MSB)","Vendor ID (LSB)","Vendor ID (MSB)","Status Register (LSB)","Status Register (MSB)","DevFun Number","0x00","SERR: PCI-PCI bridge secondary error: Device Signaled SERR"
+"0xE1","0x00","0x16","Chassis Number","Slot Number","Bus Number","Device ID (LSB)","Device ID (MSB)","Vendor ID (LSB)","Vendor ID (MSB)","Status Register (LSB)","Status Register (MSB)","DevFun Number","0x00","PERR: PCI-PCI bridge secondary error: Slave Signaled Parity Error"
+"0xE1","0x00","0x17","Chassis Number","Slot Number","Bus Number","Device ID (LSB)","Device ID (MSB)","Vendor ID (LSB)","Vendor ID (MSB)","Status Register (LSB)","Status Register (MSB)","DevFun Number","0x00","SERR: PCI-PCI bridge secondary error: Signaled Target Abort"
+"0xE1","0x00","0x18","Chassis Number","Slot Number","Bus Number","Device ID (LSB)","Device ID (MSB)","Vendor ID (LSB)","Vendor ID (MSB)","Status Register (LSB)","Status Register (MSB)","DevFun Number","0x00","PERR: PCI-PCI bridge secondary error: Additional Correctable ECC Error"
+"0xE1","0x00","0x19","Chassis Number","Slot Number","Bus Number","Device ID (LSB)","Device ID (MSB)","Vendor ID (LSB)","Vendor ID (MSB)","Status Register (LSB)","Status Register (MSB)","DevFun Number","0x00","SERR: PCI-PCI bridge secondary error: Received Master Abort"
+"0xE1","0x00","0x1A","Chassis Number","Slot Number","Bus Number","Device ID (LSB)","Device ID (MSB)","Vendor ID (LSB)","Vendor ID (MSB)","Status Register (LSB)","Status Register (MSB)","DevFun Number","0x00","PERR: PCI-PCI bridge secondary error: Additional Uncorrectable ECC Error"
+"0xE1","0x00","0x1B","Chassis Number","Slot Number","Bus Number","Device ID (LSB)","Device ID (MSB)","Vendor ID (LSB)","Vendor ID (MSB)","Status Register (LSB)","Status Register (MSB)","DevFun Number","0x00","SERR: PCI-PCI bridge secondary error: Split Completion Discarded"
+"0xE1","0x00","0x1C","Chassis Number","Slot Number","Bus Number","Device ID (LSB)","Device ID (MSB)","Vendor ID (LSB)","Vendor ID (MSB)","Status Register (LSB)","Status Register (MSB)","DevFun Number","0x00","PERR: PCI-PCI bridge secondary error: Correctable ECC Error"
+"0xE1","0x00","0x1D","Chassis Number","Slot Number","Bus Number","Device ID (LSB)","Device ID (MSB)","Vendor ID (LSB)","Vendor ID (MSB)","Status Register (LSB)","Status Register (MSB)","DevFun Number","0x00","SERR: PCI-PCI bridge secondary error: Unexpected Split Completion"
+"0xE1","0x00","0x1E","Chassis Number","Slot Number","Bus Number","Device ID (LSB)","Device ID (MSB)","Vendor ID (LSB)","Vendor ID (MSB)","Status Register (LSB)","Status Register (MSB)","DevFun Number","0x00","PERR: PCI-PCI bridge secondary error: Uncorrectable ECC Error"
+"0xE1","0x00","0x1F","Chassis Number","Slot Number","Bus Number","Device ID (LSB)","Device ID (MSB)","Vendor ID (LSB)","Vendor ID (MSB)","Status Register (LSB)","Status Register (MSB)","DevFun Number","0x00","SERR: PCI-PCI bridge secondary error: Received split completion error"
+"0xE1","0x00","0x20","Chassis Number","Slot Number","Bus Number","Device ID (LSB)","Device ID (MSB)","Vendor ID (LSB)","Vendor ID (MSB)","Status Register (LSB)","Status Register (MSB)","DevFun Number","0x00","PERR: PCI ECC Error (Corrected)"
+"0xE1","0x00","0x21","Chassis Number","Slot Number","Bus Number","Device ID (LSB)","Device ID (MSB)","Vendor ID (LSB)","Vendor ID (MSB)","Status Register (LSB)","Status Register (MSB)","DevFun Number","0x00","SERR: PCI Bus Address Parity Error"
+"0xE1","0x00","0x22","Chassis Number","Slot Number","Bus Number","Device ID (LSB)","Device ID (MSB)","Vendor ID (LSB)","Vendor ID (MSB)","Status Register (LSB)","Status Register (MSB)","DevFun Number","0x00","PERR: PCI Bus Data Parity Error"
+"0xE1","0x00","0x23","Chassis Number","Slot Number","Bus Number","Device ID (LSB)","Device ID (MSB)","Vendor ID (LSB)","Vendor ID (MSB)","Status Register (LSB)","Status Register (MSB)","DevFun Number","0x00","SERR: SERR# Asserted"
+"0xE1","0x00","0x24","Chassis Number","Slot Number","Bus Number","Device ID (LSB)","Device ID (MSB)","Vendor ID (LSB)","Vendor ID (MSB)","Status Register (LSB)","Status Register (MSB)","DevFun Number","0x00","PERR: PERR Received by Calgary on a PCIX Split Completion"
+"0xE1","0x00","0x25","Chassis Number","Slot Number","Bus Number","Device ID (LSB)","Device ID (MSB)","Vendor ID (LSB)","Vendor ID (MSB)","Status Register (LSB)","Status Register (MSB)","DevFun Number","0x00","SERR: Invalid Address"
+"0xE1","0x00","0x27","Chassis Number","Slot Number","Bus Number","Device ID (LSB)","Device ID (MSB)","Vendor ID (LSB)","Vendor ID (MSB)","Status Register (LSB)","Status Register (MSB)","DevFun Number","0x00","SERR: TCE Extent Error"
+"0xE1","0x00","0x29","Chassis Number","Slot Number","Bus Number","Device ID (LSB)","Device ID (MSB)","Vendor ID (LSB)","Vendor ID (MSB)","Status Register (LSB)","Status Register (MSB)","DevFun Number","0x00","SERR: Page Fault"
+"0xE1","0x00","0x2B","Chassis Number","Slot Number","Bus Number","Device ID (LSB)","Device ID (MSB)","Vendor ID (LSB)","Vendor ID (MSB)","Status Register (LSB)","Status Register (MSB)","DevFun Number","0x00","SERR: Unauthorized Access"
+"0xE1","0x00","0x2D","Chassis Number","Slot Number","Bus Number","Device ID (LSB)","Device ID (MSB)","Vendor ID (LSB)","Vendor ID (MSB)","Status Register (LSB)","Status Register (MSB)","DevFun Number","0x00","SERR: Parity Error in DMA Read Data Buffer"
+"0xE1","0x00","0x2F","Chassis Number","Slot Number","Bus Number","Device ID (LSB)","Device ID (MSB)","Vendor ID (LSB)","Vendor ID (MSB)","Status Register (LSB)","Status Register (MSB)","DevFun Number","0x00","SERR: PCI Bus Time Out"
+"0xE1","0x00","0x31","Chassis Number","Slot Number","Bus Number","Device ID (LSB)","Device ID (MSB)","Vendor ID (LSB)","Vendor ID (MSB)","Status Register (LSB)","Status Register (MSB)","DevFun Number","0x00","SERR: DMA Delayed Read Timeout"
+"0xE1","0x00","0x33","Chassis Number","Slot Number","Bus Number","Device ID (LSB)","Device ID (MSB)","Vendor ID (LSB)","Vendor ID (MSB)","Status Register (LSB)","Status Register (MSB)","DevFun Number","0x00","SERR: Internal Error on PCIX Split Completion"
+"0xE1","0x00","0x35","Chassis Number","Slot Number","Bus Number","Device ID (LSB)","Device ID (MSB)","Vendor ID (LSB)","Vendor ID (MSB)","Status Register (LSB)","Status Register (MSB)","DevFun Number","0x00","SERR: DMA Read Reply (RIO) Timeout"
+"0xE1","0x00","0x37","Chassis Number","Slot Number","Bus Number","Device ID (LSB)","Device ID (MSB)","Vendor ID (LSB)","Vendor ID (MSB)","Status Register (LSB)","Status Register (MSB)","DevFun Number","0x00","SERR: Internal RAM Error on DMA Write"
+"0xE1","0x00","0x39","Chassis Number","Slot Number","Bus Number","Device ID (LSB)","Device ID (MSB)","Vendor ID (LSB)","Vendor ID (MSB)","Status Register (LSB)","Status Register (MSB)","DevFun Number","0x00","SERR: MVE Valid Bit Off"
+"0xE1","0x00","0x3B","Chassis Number","Slot Number","Bus Number","Device ID (LSB)","Device ID (MSB)","Vendor ID (LSB)","Vendor ID (MSB)","Status Register (LSB)","Status Register (MSB)","DevFun Number","0x00","SERR: MVE Index Invalid"
+"0xE1","0x00","0x40","Chassis Number","Slot Number","Bus Number","Device ID (LSB)","Device ID (MSB)","Vendor ID (LSB)","Vendor ID (MSB)","Status Register (LSB)","Status Register (MSB)","DevFun Number","0x00","PERR: ECC Error (Corrected)"
+"0xE1","0x00","0x41","Chassis Number","Slot Number","Bus Number","Device ID (LSB)","Device ID (MSB)","Vendor ID (LSB)","Vendor ID (MSB)","Status Register (LSB)","Status Register (MSB)","DevFun Number","0x00","SERR: SERR# Detected"
+"0xE1","0x00","0x42","Chassis Number","Slot Number","Bus Number","Device ID (LSB)","Device ID (MSB)","Vendor ID (LSB)","Vendor ID (MSB)","Status Register (LSB)","Status Register (MSB)","DevFun Number","0x00","PERR: PCI Bus Data Parity Error"
+"0xE1","0x00","0x43","Chassis Number","Slot Number","Bus Number","Device ID (LSB)","Device ID (MSB)","Vendor ID (LSB)","Vendor ID (MSB)","Status Register (LSB)","Status Register (MSB)","DevFun Number","0x00","SERR: No DEVSEL#"
+"0xE1","0x00","0x45","Chassis Number","Slot Number","Bus Number","Device ID (LSB)","Device ID (MSB)","Vendor ID (LSB)","Vendor ID (MSB)","Status Register (LSB)","Status Register (MSB)","DevFun Number","0x00","SERR: Bus Time Out"
+"0xE1","0x00","0x47","Chassis Number","Slot Number","Bus Number","Device ID (LSB)","Device ID (MSB)","Vendor ID (LSB)","Vendor ID (MSB)","Status Register (LSB)","Status Register (MSB)","DevFun Number","0x00","SERR: Retry Count Expired"
+"0xE1","0x00","0x49","Chassis Number","Slot Number","Bus Number","Device ID (LSB)","Device ID (MSB)","Vendor ID (LSB)","Vendor ID (MSB)","Status Register (LSB)","Status Register (MSB)","DevFun Number","0x00","SERR: Target-Abort"
+"0xE1","0x00","0x4B","Chassis Number","Slot Number","Bus Number","Device ID (LSB)","Device ID (MSB)","Vendor ID (LSB)","Vendor ID (MSB)","Status Register (LSB)","Status Register (MSB)","DevFun Number","0x00","SERR: Invalid Size"
+"0xE1","0x00","0x4D","Chassis Number","Slot Number","Bus Number","Device ID (LSB)","Device ID (MSB)","Vendor ID (LSB)","Vendor ID (MSB)","Status Register (LSB)","Status Register (MSB)","DevFun Number","0x00","SERR: Access Not Enabled"
+"0xE1","0x00","0x4F","Chassis Number","Slot Number","Bus Number","Device ID (LSB)","Device ID (MSB)","Vendor ID (LSB)","Vendor ID (MSB)","Status Register (LSB)","Status Register (MSB)","DevFun Number","0x00","SERR: Internal RAM Error on MMIO Store"
+"0xE1","0x00","0x51","Chassis Number","Slot Number","Bus Number","Device ID (LSB)","Device ID (MSB)","Vendor ID (LSB)","Vendor ID (MSB)","Status Register (LSB)","Status Register (MSB)","DevFun Number","0x00","SERR: Split Response Received"
+"0xE1","0x00","0x53","Chassis Number","Slot Number","Bus Number","Device ID (LSB)","Device ID (MSB)","Vendor ID (LSB)","Vendor ID (MSB)","Status Register (LSB)","Status Register (MSB)","DevFun Number","0x00","SERR: PCIX Split Completion Error Status Received"
+"0xE1","0x00","0x55","Chassis Number","Slot Number","Bus Number","Device ID (LSB)","Device ID (MSB)","Vendor ID (LSB)","Vendor ID (MSB)","Status Register (LSB)","Status Register (MSB)","DevFun Number","0x00","SERR: Unexpected PCIX Split Completion Received"
+"0xE1","0x00","0x57","Chassis Number","Slot Number","Bus Number","Device ID (LSB)","Device ID (MSB)","Vendor ID (LSB)","Vendor ID (MSB)","Status Register (LSB)","Status Register (MSB)","DevFun Number","0x00","SERR: PCIX Split Completion Timeout"
+"0xE1","0x00","0x59","Chassis Number","Slot Number","Bus Number","Device ID (LSB)","Device ID (MSB)","Vendor ID (LSB)","Vendor ID (MSB)","Status Register (LSB)","Status Register (MSB)","DevFun Number","0x00","SERR: Recoverable Error Summary Bit"
+"0xE1","0x00","0x5B","Chassis Number","Slot Number","Bus Number","Device ID (LSB)","Device ID (MSB)","Vendor ID (LSB)","Vendor ID (MSB)","Status Register (LSB)","Status Register (MSB)","DevFun Number","0x00","SERR: CSR Error Summary Bit"
+"0xE1","0x00","0x5D","Chassis Number","Slot Number","Bus Number","Device ID (LSB)","Device ID (MSB)","Vendor ID (LSB)","Vendor ID (MSB)","Status Register (LSB)","Status Register (MSB)","DevFun Number","0x00","SERR: Internal RAM Error on MMIO Load"
+"0xE1","0x00","0x61","Chassis Number","Slot Number","Bus Number","Device ID (LSB)","Device ID (MSB)","Vendor ID (LSB)","Vendor ID (MSB)","Status Register (LSB)","Status Register (MSB)","DevFun Number","0x00","SERR: Bad Command"
+"0xE1","0x00","0x63","Chassis Number","Slot Number","Bus Number","Device ID (LSB)","Device ID (MSB)","Vendor ID (LSB)","Vendor ID (MSB)","Status Register (LSB)","Status Register (MSB)","DevFun Number","0x00","SERR: Length Field Invalid"
+"0xE1","0x00","0x65","Chassis Number","Slot Number","Bus Number","Device ID (LSB)","Device ID (MSB)","Vendor ID (LSB)","Vendor ID (MSB)","Status Register (LSB)","Status Register (MSB)","DevFun Number","0x00","SERR: Load Greater Than 8 & No Write Buffer Enabled"
+"0xE1","0x00","0x67","Chassis Number","Slot Number","Bus Number","Device ID (LSB)","Device ID (MSB)","Vendor ID (LSB)","Vendor ID (MSB)","Status Register (LSB)","Status Register (MSB)","DevFun Number","0x00","SERR: PCIX Discontiguous Byte Enable Error"
+"0xE1","0x00","0x69","Chassis Number","Slot Number","Bus Number","Device ID (LSB)","Device ID (MSB)","Vendor ID (LSB)","Vendor ID (MSB)","Status Register (LSB)","Status Register (MSB)","DevFun Number","0x00","SERR: 4K Address Boundary Crossing Error"
+"0xE1","0x00","0x6B","Chassis Number","Slot Number","Bus Number","Device ID (LSB)","Device ID (MSB)","Vendor ID (LSB)","Vendor ID (MSB)","Status Register (LSB)","Status Register (MSB)","DevFun Number","0x00","SERR: Store Wrap State Machine Check"
+"0xE1","0x00","0x6D","Chassis Number","Slot Number","Bus Number","Device ID (LSB)","Device ID (MSB)","Vendor ID (LSB)","Vendor ID (MSB)","Status Register (LSB)","Status Register (MSB)","DevFun Number","0x00","SERR: Target State Machine Check"
+"0xE1","0x00","0x6F","Chassis Number","Slot Number","Bus Number","Device ID (LSB)","Device ID (MSB)","Vendor ID (LSB)","Vendor ID (MSB)","Status Register (LSB)","Status Register (MSB)","DevFun Number","0x00","SERR: Invalid Transaction PM/DW"
+"0xE1","0x00","0x71","Chassis Number","Slot Number","Bus Number","Device ID (LSB)","Device ID (MSB)","Vendor ID (LSB)","Vendor ID (MSB)","Status Register (LSB)","Status Register (MSB)","DevFun Number","0x00","SERR: Invalid Transaction PM/DR"
+"0xE1","0x00","0x73","Chassis Number","Slot Number","Bus Number","Device ID (LSB)","Device ID (MSB)","Vendor ID (LSB)","Vendor ID (MSB)","Status Register (LSB)","Status Register (MSB)","DevFun Number","0x00","SERR: Invalid Transaction PS/DW"
+"0xE1","0x00","0x75","Chassis Number","Slot Number","Bus Number","Device ID (LSB)","Device ID (MSB)","Vendor ID (LSB)","Vendor ID (MSB)","Status Register (LSB)","Status Register (MSB)","DevFun Number","0x00","SERR: DMA Write Command FIFO Parity Error"
+"0xE1","0x00","0x76","Chassis Number","Slot Number","Bus Number","Device ID (LSB)","Device ID (MSB)","Vendor ID (LSB)","Vendor ID (MSB)","Status Register (LSB)","Status Register (MSB)","DevFun Number","0x00","PERR: PCI Secondary Status Register Dump"
+"0xE1","0x00","0x77","Chassis Number","Slot Number","Bus Number","Device ID (LSB)","Device ID (MSB)","Vendor ID (LSB)","Vendor ID (MSB)","Status Register (LSB)","Status Register (MSB)","DevFun Number","0x00","SERR: PCI Secondary Status Register Dump"
+"0xE1","0x00","0x81","Chassis Number","Slot Number","Bus Number","Device ID (LSB)","Device ID (MSB)","Vendor ID (LSB)","Vendor ID (MSB)","Status Register (LSB)","Status Register (MSB)","DevFun Number","0x00","PCI-to-PCI Bridge Discard Timer Error"
+"0xE1","0x00","0x01","Chassis Number","Slot Number","Bus Number","Device ID (LSB)","Device ID (MSB)","Vendor ID (LSB)","Vendor ID (MSB)","Status Register (LSB)","Status Register (MSB)","DevFun Number","0x01","SERR detected on PCI bus"
+"0xE1","0x00","0x02","Chassis Number","Slot Number","Bus Number","Device ID (LSB)","Device ID (MSB)","Vendor ID (LSB)","Vendor ID (MSB)","Status Register (LSB)","Status Register (MSB)","DevFun Number","0x01","PERR detected on PCI bus"
+"0xE1","0x01","0x00","R","R","Bank (LSB)","Bank (MSB)","Apic ID (LSB)","Apic ID (MSB)","CK4(LSB)","CK4","CK4","CK4(MSB)","0x00","Processor Error Information Data A"
+"0xE1","0x01","0x01","R","R","Address high (LSB)","Address high","Address high","Address high (MSB)","Address low (LSB)","Address low ","Address low ","Address low (MSB)","0x00","Processor Error Information Data B1"
+"0xE1","0x01","0x02","R","R","Timestamp high (LSB)","Timestamp high","Timestamp high","Timestamp high (MSB)","Timestamp Low (LSB)","Timestamp low","Timestamp low","Timestamp low (MSB)","0x00","Processor Error Information Data B2"
+"0xE1","0x01","0x03","R","R","MCA status register high (LSB)","MCA status register high","MCA status register high","MCA status register high (MSB)","MCA status register low (LSB)","MCA status register low","MCA status register low","MCA status register low (MSB)","0x00","Processor Error Information Data C"
+"0xE1","0x01","0x04","Chassis","0x00","Processor ID","R","R","R","R","R","R","R","0x00","Processor recoverable error"
+"0xE1","0x01","0x04","Chassis","0x01","Processor ID","R","R","R","R","R","R","R","0x00","Processor unrecoverable error"
+"0xE1","0x02","0x00","0x00","Failed Row","Spare Row","R","R","R","R","R","R","R","0x00","Memory sparing event, start 1"
+"0xE1","0x02","0x00","0x02","Failed Row","Spare Row","R","R","R","R","R","R","R","0x00","Memory sparing event, done  1"
+"0xE1","0x02","0x00","0x01","Failed Row 1","Failed Row 2","Spare Row 1","Spare Row 2","R","R","R","R","R","0x00","Memory sparing event, start 2"
+"0xE1","0x02","0x00","0x03","Failed Row 1","Failed Row 2","Spare Row 1","Spare Row 2","R","R","R","R","R","0x00","Memory sparing event, done  2"
+"0xE1","0x02","0x01","Failed Port","Spare Port","R","R","R","R","R","R","R","R","0x00","Memory mirroring failover occurred"
+"0xE1","0x04","0x00","0x00","FSB FERR/NERR Register","FSB FERR/NERR Register","Chassis Number","R","R","R","R","R","R","0x00","FSB A Fatal"
+"0xE1","0x04","0x00","0x01","FSB FERR/NERR Register","FSB FERR/NERR Register","Chassis Number","R","R","R","R","R","R","0x00","FSB A Nonfatal"
+"0xE1","0x04","0x00","0x02","FSB FERR/NERR Register","FSB FERR/NERR Register","Chassis Number","R","R","R","R","R","R","0x00","FSB B Fatal"
+"0xE1","0x04","0x00","0x03","FSB FERR/NERR Register","FSB FERR/NERR Register","Chassis Number","R","R","R","R","R","R","0x00","FSB B Nonfatal"
+"0xE1","0x05","0x00","0x02","Hi FERR or NERR Register","R","R","R","R","R","R","R","R","0x00","Lindenhurst Chipset Event: Hi Fatal"
+"0xE1","0x05","0x00","0x03","Hi FERR or NERR Register","R","R","R","R","R","R","R","R","0x00","Lindenhurst Chipset Event: Hi Nonfatal"
+"0xE1","0x05","0x01","0x02","Status Register Contents","R","R","R","R","R","R","R","R","0x00","Fatal internal north bridge error"
+"0xE1","0x05","0x01","0x03","Status Register Contents","R","R","R","R","R","R","R","R","0x00","Nonfatal internal north bridge error"
+"0xE2","0x00","Register ID","R","First Fire Bit","Register Data (LSB)","Register Data","Register Data","Register Data","Register Data","Register Data","Register Data","Register Data (MSB)","0x00","PCI Industry Standard Register Dump"
+"0xE2","0x01","Register ID","R","First Fire Bit (0xFF if N/A)","Register Data (LSB)","Register Data","Register Data","Register Data","Register Data","Register Data","Register Data","Register Data (MSB)","0x00","PCI-X Industry Standard Register Dump"
+"0xE2","0x02","Register ID","R","First Fire Bit (0xFF if N/A)","Register Data (LSB)","Register Data","Register Data","Register Data","Register Data","Register Data","Register Data","Register Data (MSB)","0x00","PCI Express Industry Standard Register Dump"
+"0xE3","Platform ID","Register ID","R","R","R","R","R","R","Register Data (LSB)","Register Data","Register Data","Register Data (MSB)","0x00","RAW Hex Dump"
+"0xC0","XX","XX","XX","XX","XX","XX","XX","0x00","0x00","R","R","R","0x00","PCI Event/Error Occurred. Next non-timestamped OEM SEL entry will contain details of the specific PCI event/error"
+"0xC0","XX","XX","XX","XX","XX","XX","XX","0x01","0x00","R","R","R","0x00","Processor Event/Error Occurred. Next non-timestamped OEM SEL entry will contain details of the specific PCI event/error"
+"0xC0","XX","XX","XX","XX","XX","XX","XX","0x02","0x00","R","R","R","0x00","Memory Event/Error Occurred. Next non-timestamped OEM SEL entry will contain details of the specific PCI event/error"
+"0xC0","XX","XX","XX","XX","XX","XX","XX","0x03","0x00","R","R","R","0x00"," Scalability Event/Error Occurred. Next non-timestamped OEM SEL entry will contain details of the specific PCI event/error"
+"0xC0","XX","XX","XX","XX","XX","XX","XX","0x04","0x00","R","R","R","0x00","Bus PCI Event/Error Occurred. Next non-timestamped OEM SEL entry will contain details of the specific PCI event/error"
+"0xC0","XX","XX","XX","XX","XX","XX","XX","0x05","0x00","R","R","R","0x00","Chipset Event/Error Occurred. Next non-timestamped OEM SEL entry will contain details of the specific PCI event/error"

ipmitool/control/Makefile.am

@@ -0,0 +1,37 @@
+# Copyright (c) 2003 Sun Microsystems, Inc.  All Rights Reserved.
+# 
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+# 
+# Redistribution of source code must retain the above copyright
+# notice, this list of conditions and the following disclaimer.
+# 
+# Redistribution in binary form must reproduce the above copyright
+# notice, this list of conditions and the following disclaimer in the
+# documentation and/or other materials provided with the distribution.
+# 
+# Neither the name of Sun Microsystems, Inc. or the names of
+# contributors may be used to endorse or promote products derived
+# from this software without specific prior written permission.
+# 
+# This software is provided "AS IS," without a warranty of any kind.
+# ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND WARRANTIES,
+# INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A
+# PARTICULAR PURPOSE OR NON-INFRINGEMENT, ARE HEREBY EXCLUDED.
+# SUN MICROSYSTEMS, INC. ("SUN") AND ITS LICENSORS SHALL NOT BE LIABLE
+# FOR ANY DAMAGES SUFFERED BY LICENSEE AS A RESULT OF USING, MODIFYING
+# OR DISTRIBUTING THIS SOFTWARE OR ITS DERIVATIVES.  IN NO EVENT WILL
+# SUN OR ITS LICENSORS BE LIABLE FOR ANY LOST REVENUE, PROFIT OR DATA,
+# OR FOR DIRECT, INDIRECT, SPECIAL, CONSEQUENTIAL, INCIDENTAL OR
+# PUNITIVE DAMAGES, HOWEVER CAUSED AND REGARDLESS OF THE THEORY OF
+# LIABILITY, ARISING OUT OF THE USE OF OR INABILITY TO USE THIS SOFTWARE,
+# EVEN IF SUN HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
+
+MAINTAINERCLEANFILES	= Makefile.in
+
+EXTRA_DIST		= pkginfo.in prototype.in \
+			  ipmitool.spec.in rpmmacros.in rpmrc
+
+dist-hook: pkginfo prototype rpmmacros
+

ipmitool/control/ipmitool.spec.in

@@ -0,0 +1,225 @@
+Name:         ipmitool
+Summary:      ipmitool - Utility for IPMI control
+Version:      @VERSION@
+Release:      1%{?_distro:.%{_distro}}
+License:      BSD
+Group:        Utilities
+Packager:     Duncan Laurie <duncan@iceblink.org>
+Source:       ipmitool-@VERSION@.tar.gz
+Buildroot:    /var/tmp/ipmitool-root
+
+%description
+This package contains a utility for interfacing with devices that support
+the Intelligent Platform Management Interface specification.  IPMI is
+an open standard for machine health, inventory, and remote power control.
+
+This utility can communicate with IPMI-enabled devices through either a
+kernel driver such as OpenIPMI or over the RMCP LAN protocol defined in
+the IPMI specification.  IPMIv2 adds support for encrypted LAN
+communications and remote Serial-over-LAN functionality.
+
+It provides commands for reading the Sensor Data Repository (SDR) and
+displaying sensor values, displaying the contents of the System Event
+Log (SEL), printing Field Replaceable Unit (FRU) information, reading and
+setting LAN configuration, and chassis power control.
+
+%prep
+if [ "$RPM_BUILD_ROOT" ] && [ "$RPM_BUILD_ROOT" != "/" ]; then
+    rm -rf $RPM_BUILD_ROOT
+fi
+
+%setup
+
+%build
+./configure --with-kerneldir \
+	--with-rpm-distro=@DISTRO@ \
+	--prefix=%{_prefix} \
+	--bindir=%{_bindir} \
+	--sbindir=%{_sbindir} \
+	--datadir=%{_datadir} \
+	--includedir=%{_includedir} \
+	--libdir=%{_libdir} \
+	--mandir=%{_mandir} \
+	--sysconfdir=%{_sysconfdir}
+make
+
+%install
+make DESTDIR=$RPM_BUILD_ROOT install-strip
+
+%clean
+if [ "$RPM_BUILD_ROOT" ] && [ "$RPM_BUILD_ROOT" != "/" ]; then
+    rm -rf $RPM_BUILD_ROOT
+fi
+rm -rf $RPM_BUILD_DIR/ipmitool-@VERSION@
+
+%files
+%defattr(-,root,root)
+%{_bindir}/*
+%{_sbindir}/*
+%{_datadir}/ipmitool/*
+%doc %{_mandir}/man1/*
+%doc %{_mandir}/man8/*
+%doc %{_datadir}/doc/ipmitool/*
+
+%changelog
+* Sun Mar 19 2006 <duncan@iceblink.org>  1.8.7-1
+ - Add Sun OEM command for blades
+ - Increase argument size for raw commands in shell/exec
+ - Fix handling of LUNs for LAN interfaces
+ - Add IPMIv2 SOL loopback test
+ - Add support for IBM OEM SEL messages
+ - Disable file paranoia checks on read files by default
+ - Support IPMIv2 SOL on older Intel boxes
+ - Display message and exit if keepalive fails during SOL
+ - Add support for setting VLAN id and priority
+ - Add support for FreeBSD OpenIPMI-compatible driver
+ - Add support for IPMIv2 Firmware Firewall
+ - Fix gcc4 compile warnings
+ - Make ipmievd generate pidfile
+ - Add initscripts for ipmievd
+
+* Mon Jan 17 2006 <duncan@iceblink.org>  1.8.6-1
+ - Fix memory corruption when sending encrypted SOL traffic
+ - Add keepalive timer to IPMIv2 SOL sessions
+
+* Sat Jan 14 2006 <duncan@iceblink.org>  1.8.5-1
+ - Raise privilege level after creating IPMIv2 session
+ - Add support for settable SOL escape character with -e option
+ - Add support for Kg BMC key for IPMIv2 authentication with -k option
+ - Add support for Tyan IPMIv1.5 SOL with tsol command
+ - Add support for PICMG devices
+ - Add support for OEM SEL event parsing
+ - Add support for command bridging over lan and lanplus interfaces
+ - New 'chassis selftest' command
+ - Many bufxies and patches from contributors
+
+* Wed May 18 2005 <duncan@iceblink.org>  1.8.2-1
+ - Fix FRU reading for large (>255 bytes) areas.
+ - Overhaul to ipmievd to support SEL polling in addition to OpenIPMI.
+ - Fix LAN parameter segfault when no Ciphers supported by BMC.
+ - Fix IPMIv2 support on Intel v2 BMCs (use -o intelplus).
+ - Separate option parsing code from main ipmitool source file.
+ - Add raw I2C support with IPMI Master Read-Write command.
+ - Add support for new 'sdr elist' extended output format.
+ - Add support for listing sensors by type with 'sdr type' command.
+ - Add support for new 'sel elist' extended output format that
+   cross-references events with sensors.
+ - Add support for sending dynamically generated platform events
+   based on existing sensor information.
+ - New '-S' argument to read local SDR cache created with 'sdr dump'.
+ - Updated manpage for ipmitool and ipmievd.
+
+* Wed Apr 06 2005 <duncan@iceblink.org>  1.8.1-1
+ - Install ipmievd into /usr/sbin
+
+* Wed Mar 16 2005 <duncan@iceblink.org>  1.8.0-1
+ - Fix IPMIv2.0 issues
+ - Fix chassis boot parameter support
+ - Add support for linear sensors
+ - Update bmc plugin to work with new Solaris bmc driver (new ioctl
+   for interface detection and new STREAMS message-based interface)
+
+* Tue Jan 18 2005 <duncan@iceblink.org>  1.7.0-1
+ - Propogate errors correctly so exit status will be useful
+ - More consistent display of errors including completion code text
+ - Errors and debug is send to stderr now
+ - New "sel get" command that will print details about SEL entry
+   and corresponding SDR records as well as FRUs via entity association
+ - Improved event generator, now supports reading events from text file
+ - New "-o oemtype" option for specifying OEM boards
+   exsting types are "supermicro" and "intelwv2"
+ - New PEF subsystem from Tim Murphy at Dell
+ - New "bmc" plugin for Solaris 10 x86
+ - Many bugfixes and contributed patches
+ - Support for Supermicro BMC OEM authentication method
+ - Fix minor problem with LAN parameter setting
+
+* Wed Aug 18 2004 <duncan@iceblink.org>  1.6.0-1
+ - Add a README
+ - Add support for IPMIv2 and Serial-over-LAN from Newisys
+ - Add Solaris x86 lipmi interface
+ - Add support for building Solaris packages
+ - Add support for building RPMs as non-root user
+ - Fix segfault when doing "sel list" (from Matthew Braithwaite)
+ - Fix "chassis identify" on some BMCs (from ebrower@sourceforge)
+ - Add "bmc info" and related output (from ebrower@sourceforge)
+ - new "shell" and "exec" commands
+ - lots of other contributed patches
+
+* Sat May 27 2004 <duncan@iceblink.org>  1.5.9-1
+ - Add ability to get a particular sensor by name
+ - Add ability to set a particular sensor threshold
+ - Add support for displaying V2 channel authentication levels
+ - Add README for rrdtool scripts in contrib directory
+ - Improve lan interface retry handling
+ - Support prompting for password or reading from environment
+ - Move chaninfo command into channel subcommand
+ - Fix reservation ID handling when two sessions open to BMC
+ - Fix reading of large FRU data
+ - Add configure option for changing binary to ipmiadm for Solaris
+ - Fix compile problem on Solaris 8
+
+* Tue Jan 27 2004 <duncan@iceblink.org>  1.5.8-1
+ - Enable static compilation of interfaces
+ - Fix types to be 64-bit safe
+ - Fix compilation problems on Solaris
+ - Fix multiple big-endian problems for Solaris/SPARC
+ - Fix channel access to save settings to NVRAM
+ - Set channel privilege limit to ADMIN during "access on"
+ - Enable gratuitous ARP in bmcautoconf.sh
+ - Add support for Linux kernel panic messages in SEL output
+ - Add support for type 3 SDR records
+
+* Mon Jan  5 2004 <duncan@iceblink.org>  1.5.7-1
+ - add IPMIv1.5 eratta fixes
+ - additions to FRU printing and FRU multirecords
+ - better handling of SDR printing
+ - contrib scripts for creating rrdtool graphs
+
+* Thu Dec  4 2003 <duncan@iceblink.org>  1.5.6-1
+ - Fix SEL event decoding for generic events
+ - Handle empty SEL gracefully when doing "sel list"
+ - Fix sdr handling of sensors that do not return a reading
+ - Fix for CSV display of sensor readings/units from Fredrik <EFBFBD>hrn
+
+* Tue Nov 25 2003 <duncan@iceblink.org>  1.5.5-1
+ - Add -U option for setting LAN username
+ - Fix -v usage for plugin interfaces
+
+* Fri Nov 14 2003 <duncan@iceblink.org>  1.5.4-1
+ - pull interface plugin api into library
+ - fix ipmievd
+
+* Fri Oct 31 2003 <duncan@iceblink.org>  1.5.3-1
+ - add -g optin for pedantic ipmi-over-lan communication
+
+* Fri Oct 24 2003 <duncan@iceblink.org>  1.5.2-1
+ - add gratuitous arp interval setting
+
+* Wed Oct  8 2003 <duncan@iceblink.org>  1.5.1-1
+ - better SEL support
+ - fix display bug in SDR list
+
+* Fri Sep  5 2003 <duncan@iceblink.org>  1.5.0-1
+ - use automake/autoconf/libtool
+ - dynamic loading interface plugins
+
+* Wed May 28 2003 <duncan@iceblink.org>  1.4.0-1
+ - make UDP packet handling more robust
+ - fix imb driver support
+
+* Thu May 22 2003 <duncan@iceblink.org>  1.3-1
+ - update manpage
+ - rework of low-level network handling
+ - add basic imb driver support
+
+* Wed Apr  2 2003 <duncan@iceblink.org>  1.2-1
+ - change command line option parsing
+ - support for more chassis commands
+
+* Tue Apr  1 2003 <duncan@iceblink.org>  1.1-1
+ - minor fixes.
+
+* Sun Mar 30 2003 <duncan@iceblink.org>  1.0-1
+ - Initial release.
+

ipmitool/control/pkginfo.in

@@ -0,0 +1,10 @@
+PKG="@PACKAGE@"
+NAME="@PACKAGE@ - Utility for Intelligent Platform Management Interface (IPMI) control"
+ARCH="@ARCH@"
+VERSION="@VERSION@"
+CATEGORY="system"
+VENDOR="Duncan Laurie"
+EMAIL="duncan@iceblink.org"
+PSTAMP="@PSTAMP@"
+BASEDIR="@BASEDIR@"
+CLASSES="none"

ipmitool/control/prototype.in

@@ -0,0 +1,12 @@
+i pkginfo
+d none bin ? ? ?
+f none bin/@PACKAGE@=../src/@PACKAGE@ 0755 root bin
+d none sbin ? ? ?
+f none sbin/ipmievd=../src/ipmievd 0755 root bin
+d none share ? ? ?
+d none share/man ? ? ?
+d none share/man/man1 ? ? ?
+f none share/man/man1/@PACKAGE@.1=../doc/@PACKAGE@.1 0644 root bin
+d none share/man/man8 ? ? ?
+f none share/man/man8/ipmievd.8=../doc/ipmievd.8 0644 root bin
+

ipmitool/control/rpmmacros.in

@@ -0,0 +1,12 @@
+%_topdir	%(echo $BUILDDIR)
+%_sourcedir     %{_topdir}/..
+%_specdir       %{_sourcedir}
+%_tmppath	%{_topdir}/tmp
+%_builddir	%{_topdir}/BUILD
+%_buildroot	%{_topdir}/%{_tmppath}/%{name}-%{version}-root
+%_rpmdir	%{_topdir}/RPMS
+%_srcrpmdir	%{_topdir}/SRPMS
+%_distro	@DISTRO@
+%_rpmfilename	%%{NAME}-%%{VERSION}-%%{RELEASE}.%%{ARCH}.rpm
+%packager	duncan@iceblink.org
+%distribution	Sourceforge Build

ipmitool/control/rpmrc

@@ -0,0 +1,8 @@
+macrofiles: /usr/lib/rpm/macros:/usr/lib/rpm/%{_target}/macros:/etc/rpm/macros.specspo:/etc/rpm/macros:/etc/rpm/%{_target}/macros:%(echo $CONFIGDIR)/rpmmacros
+
+buildarchtranslate: athlon: i386
+buildarchtranslate: i686: i386
+buildarchtranslate: i586: i386
+buildarchtranslate: i486: i386
+buildarchtranslate: i386: i386
+

ipmitool/debian/README.Debian

@@ -0,0 +1,5 @@
+For more information about setting up your Debian system with IPMI
+please see the excellent howto by Tim Small:
+
+http://buttersideup.com/docs/howto/IPMI_on_Debian.html
+

ipmitool/debian/changelog

@@ -1,44 +1,221 @@
+ipmitool (1.8.6-2) unstable; urgency=low
+
+  * Add ia64 as an supported arch. (Closes: #355930)
+
+ -- Petter Reinholdtsen <pere@debian.org>  Fri, 10 Mar 2006 23:34:50 +0100
+
+ipmitool (1.8.6-1) unstable; urgency=low
+
+  * New upstream version.
+    - Avoid crashing when setting lan IP address. (Closes: #351205)
+  * Avoid changing history by reverding upstream change
+    to email addresses in debian/changelog.
+  * Correct typo in control file: Suggest -> Suggests.  Thanks
+    to Philipp Matthias Hahn for the report.
+  * Add init.d/ipmievd script.  Based on script from Elmar Hoffmann,
+    slightly modified to use lsb-base functions. Added dependency on
+    lsb-base.  (Closes: #345994)
+
+ -- Petter Reinholdtsen <pere@debian.org>  Sun, 26 Feb 2006 10:31:14 +0100
+
+ipmitool (1.8.2-2) unstable; urgency=low
+
+  * Add build-dependency on 'libreadline5-dev | libreadline-dev' to make
+    sure all archs get readline support. (Closes: #326341)
+  * Add build-dependency on libssl-dev to enable SSL support on
+    all archs.
+  * Updated Standards-Version to 3.6.2.1. (No updates required)
+
+ -- Petter Reinholdtsen <pere@debian.org>  Sat,  3 Sep 2005 19:18:51 +0200
+
+ipmitool (1.8.2-1) unstable; urgency=low
+
+  * New upstream release.
+    -  Fix FRU reading for large (>255 bytes) areas.
+    -  Overhaul to ipmievd to support SEL polling in addition to OpenIPMI.
+    -  Fix LAN parameter segfault when no Ciphers supported by
+       BMC. (Closes: #306806)
+    -  Fix IPMIv2 support on Intel v2 BMCs (use -o intelplus).
+    -  Separate option parsing code from main ipmitool source file.
+    -  Add raw I2C support with IPMI Master Read-Write command.
+    -  Add support for new 'sdr elist' extended output format.
+    -  Add support for listing sensors by type with 'sdr type' command.
+    -  Add support for new 'sel elist' extended output format that
+       cross-references events with sensors.
+    -  Add support for sending dynamically generated platform events
+       based on existing sensor information.
+    -  New '-S' argument to read local SDR cache created with 'sdr dump'.
+    -  Updated manpage for ipmitool and ipmievd. (Closes: #306894)
+  * Correct the upstream URL in debian/changelog to the current one.
+  * Suggest package openipmi. (Closes: #305629)
+  * Add debian/watch file to detect new source versions.
+
+ -- Petter Reinholdtsen <pere@debian.org>  Sun,  5 Jun 2005 10:29:18 +0200
+
+ipmitool (1.8.1-1) unstable; urgency=low
+
+  * New upstream release.
+  * Install ipmievd into /usr/sbin/.
+
+ -- Petter Reinholdtsen <pere@debian.org>  Thu,  7 Apr 2005 01:18:44 +0200
+
+ipmitool (1.8.0-1) unstable; urgency=low
+
+  * Initial upload into Debian, based on the upstream build
+    rules. (Closes: #299924)
+  * Convert debian/changelog to UTF-8.
+  * Change section from 'contrib' to 'utils'.
+  * Build-depend on debhelper (>> 4.0.0) to match the rules file.
+  * Set Standards-version to 3.6.1.
+  * Make sure binary dependency is properly generated.
+  * Add long description, copied from the project README.
+  * Drop useless provides 'ipmitool', as the package is called 'ipmitool'.
+  * Don't install the COPYING file, as the license text already is
+    included in debian/copyright.
+  * Remove unused parts of the rules file.
+  * Correct clean target in rules file, to use 'distclean' and remove
+    configure-stamp not bogus config-stamp.
+
+ -- Petter Reinholdtsen <pere@debian.org>  Sun,  3 Apr 2005 20:52:02 +0200
+
+ipmitool (1.8.0) unstable; urgency=low
+
+  * Fix IPMIv2.0 issues
+  * Fix chassis boot parameter support
+  * Add support for linear sensors
+
+ -- Duncan Laurie <duncan@iceblink.org>  Wed, Mar 16 2005 17:08:12 -0700
+
+ipmitool (1.7.1) unstable; urgency=low
+
+  * Update bmc plugin to work with new Solaris bmc driver (new ioctl
+    for interface detection and new STREAMS message-based interface).
+
+ -- Seth Goldberg <sethmeisterg@hotmail.com>  Mon, Mar 7 2005 18:03:00 -0800
+
+ipmitool (1.7.0) unstable; urgency=low
+
+  * Propogate errors correctly so exit status will be useful
+  * More consistent display of errors including completion code text
+  * Errors and debug is send to stderr now
+  * New "sel get" command that will print details about SEL entry
+    and corresponding SDR records as well as FRUs via entity association
+  * Improved event generator, now supports reading events from text file
+  * New "-o oemtype" option for specifying OEM boards
+    exsting types are "supermicro" and "intelwv2"
+  * New PEF subsystem
+  * New "bmc" plugin for Solaris 10 x86
+  * Many bugfixes and contributed patches
+
+ -- Duncan Laurie <duncan@iceblink.org>  Fri, Jan 7 2005 19:58:22 -0700
+
+ipmitool (1.6.2) unstable; urgency=low
+
+  * Support for Supermicro BMC OEM authentication method
+
+ -- Duncan Laurie <duncan@iceblink.org>  Mon, 16 Nov 2004 08:20:01 -0700
+
+ipmitool (1.6.1) unstable; urgency=low
+
+  * Fix minor problem with LAN parameter setting
+
+ -- Duncan Laurie <duncan@iceblink.org>  Wed, 29 Sep 2004 11:19:17 -0700
+
+ipmitool (1.6.0) unstable; urgency=low
+
+  * Add a README
+  * Add support for IPMIv2 and Serial-over-LAN from Newisys
+  * Add Solaris x86 lipmi interface
+  * Add support for building Solaris packages
+  * Add support for building RPMs as non-root user
+  * Fix segfault when doing "sel list" (from Matthew Braithwaite)
+  * Fix "chassis identify" on some BMCs (from ebrower@sourceforge)
+  * Add "bmc info" and related output (from ebrower@sourceforge)
+  * new "shell" and "exec" commands
+  * lots of other contributed patches
+
+ -- Duncan Laurie <duncan@iceblink.org>  Thu, 9 Sep 2004 21:39:37 -0700
+
+ipmitool (1.5.9) unstable; urgency=low
+
+  * Add ability to get a particular sensor by name
+  * Add ability to set a particular sensor threshold
+  * Add support for displaying V2 channel authentication levels
+  * Add README for rrdtool scripts in contrib directory
+  * Improve lan interface retry handling
+  * Support prompting for password or reading from environment
+  * Move chaninfo command into channel subcommand
+  * Fix reservation ID handling when two sessions open to BMC
+  * Fix reading of large FRU data
+  * Add configure option for changing binary to ipmiadm for Solaris
+  * Fix compile problem on Solaris 8
+
+ -- Duncan Laurie <duncan@iceblink.org>  Sat, 27 Mar 2004 00:11:37 -0700
+
+ipmitool (1.5.8) unstable; urgency=low
+
+  * Enable static compilation of interfaces
+  * Fix types to be 64-bit safe
+  * Fix compilation problems on Solaris
+  * Fix multiple big-endian problems for Solaris/SPARC
+  * Fix channel access to save settings to NVRAM
+  * Set channel privilege limit to ADMIN during "access on"
+  * Enable gratuitous ARP in bmcautoconf.sh
+  * Add support for Linux kernel panic messages in SEL output
+  * Add support for type 3 SDR records
+
+ -- Duncan Laurie <duncan@iceblink.org>  Tue, 27 Jan 2004 16:23:25 -0700
+
+ipmitool (1.5.7) unstable; urgency=low
+
+  * add IPMIv1.5 eratta fixes
+  * additions to FRU printing and FRU multirecords
+  * better handling of SDR printing
+  * contrib scripts for creating rrdtool graphs
+
+ -- Duncan Laurie <duncan@iceblink.org>  Mon,  5 Jan 2004 17:29:50 -0700
+
 ipmitool (1.5.6) unstable; urgency=low
 
   * Fix SEL event decoding for generic events
   * Handle empty SEL gracefully when doing "sel list"
   * Fix sdr handling of sensors that do not return a reading
-  * Fix for CSV display of sensor readings/units from Fredrik <EFBFBD>hrn
+  * Fix for CSV display of sensor readings/units from Fredrik Öhrn
 
- -- Duncan Laurie <duncan@sun.com>  Thu,  4 Dec 2003 14:47:19 -0700
+ -- Duncan Laurie <duncan@iceblink.org>  Thu,  4 Dec 2003 14:47:19 -0700
 
 ipmitool (1.5.5) unstable; urgency=low
 
   * Add -U option for setting LAN username
   * Fix -v usage for plugin interfaces
 
- -- Duncan Laurie <duncan@sun.com>  Tue, 25 Nov 2003 15:10:48 -0700
+ -- Duncan Laurie <duncan@iceblink.org>  Tue, 25 Nov 2003 15:10:48 -0700
 
 ipmitool (1.5.4) unstable; urgency=low
 
   * Put interface plugin API into library
   * Fix ipmievd
 
- -- Duncan Laurie <duncan@sun.com>  Fri, 14 Nov 2003 15:16:34 -0700
+ -- Duncan Laurie <duncan@iceblink.org>  Fri, 14 Nov 2003 15:16:34 -0700
 
 ipmitool (1.5.3) unstable; urgency=low
 
   * Add -g option to work with grizzly bmc
 
- -- Duncan Laurie <duncan@sun.com>  Mon,  3 Nov 2003 18:04:07 -0700
+ -- Duncan Laurie <duncan@iceblink.org>  Mon,  3 Nov 2003 18:04:07 -0700
 
 ipmitool (1.5.2) unstable; urgency=low
 
   * add support for setting gratuitous arp interval 
 
- -- Duncan Laurie <duncan@sun.com>  Fri, 24 Oct 2003 11:00:00 -0700
+ -- Duncan Laurie <duncan@iceblink.org>  Fri, 24 Oct 2003 11:00:00 -0700
 
 ipmitool (1.5.1) unstable; urgency=low
 
   * better SEL support
   * fix display bug in SDR list
 
- -- Duncan Laurie <duncan@sun.com>  Wed,  8 Oct 2003 17:28:51 -0700
+ -- Duncan Laurie <duncan@iceblink.org>  Wed,  8 Oct 2003 17:28:51 -0700
 
 ipmitool (1.5.0) unstable; urgency=low
 
@@ -46,24 +223,24 @@ ipmitool (1.5.0) unstable; urgency=low
   * add Intel IMB driver support
   * use autoconf/automake/libtool
 
- -- Duncan Laurie <duncan@sun.com>  Fri,  5 Sep 2003 11:57:32 -0700
+ -- Duncan Laurie <duncan@iceblink.org>  Fri,  5 Sep 2003 11:57:32 -0700
 
 ipmitool (1.2-1) unstable; urgency=low
 
   * New command line option parsing
   * More chassis commands supported
 
- -- Duncan Laurie <duncan@sun.com>  Wed,  2 Apr 2003 17:44:17 -0700
+ -- Duncan Laurie <duncan@iceblink.org>  Wed,  2 Apr 2003 17:44:17 -0700
 
 ipmitool (1.1-1) unstable; urgency=low
 
   * Minor fixes.
 
- -- Duncan Laurie <duncan@sun.com>  Tue,  1 Apr 2003 14:31:10 -0700
+ -- Duncan Laurie <duncan@iceblink.org>  Tue,  1 Apr 2003 14:31:10 -0700
 
 ipmitool (1.0-1) unstable; urgency=low
 
   * Initial Release.
 
- -- Duncan Laurie <duncan@sun.com>  Sun, 30 Mar 2003 21:30:46 -0700
+ -- Duncan Laurie <duncan@iceblink.org>  Sun, 30 Mar 2003 21:30:46 -0700
 

ipmitool/debian/control

@@ -1,12 +1,28 @@
 Source: ipmitool
-Section: contrib
+Section: utils
 Priority: optional
-Maintainer: Duncan Laurie <duncan@sun.com>
-Build-Depends: debhelper (>> 3.0.0)
-Standards-Version: 3.5.8
+Maintainer: Petter Reinholdtsen <pere@debian.org>
+Uploaders: Duncan Laurie <duncan@iceblink.org>
+Build-Depends: debhelper (>> 4.0.0), libreadline5-dev | libreadline-dev, libssl-dev
+Standards-Version: 3.6.2.1
 
 Package: ipmitool
-Architecture: i386
-Provides: ipmitool
-Description: Utility for IPMI control with kernel driver or LAN interface
+Architecture: i386 amd64 ia64
+Depends: ${shlibs:Depends}, lsb-base
+Suggests: openipmi
+Description: utility for IPMI control with kernel driver or LAN interface
+ A utility for managing and configuring devices that support the
+ Intelligent Platform Management Interface.  IPMI is an open standard
+ for monitoring, logging, recovery, inventory, and control of hardware
+ that is implemented independent of the main CPU, BIOS, and OS.  The
+ service processor (or Baseboard Management Controller, BMC) is the
+ brain behind platform management and its primary purpose is to handle
+ the autonomous sensor monitoring and event logging features.
+ .
+ The ipmitool program provides a simple command-line interface to this
+ BMC.  It features the ability to read the sensor data repository
+ (SDR) and print sensor values, display the contents of the System
+ Event Log (SEL), print Field Replaceable Unit (FRU) inventory
+ information, read and set LAN configuration parameters, and perform
+ remote chassis power control.
 

ipmitool/debian/copyright

@@ -1,7 +1,10 @@
-ipmitool
-Duncan Laurie <duncan@sun.com>
-http://www.iceblink.org/ipmitool/
+This package was debianized by Duncan Laurie before
+2003-11-18 17:55:21 +0100.
 
+It was downloaded from <URL:http://ipmitool.sourceforge.net/>
+
+Upstream Author: Duncan Laurie <duncan@iceblink.org>
+  
 Copyright (c) 2003 Sun Microsystems, Inc.  All Rights Reserved.
 
 Redistribution and use in source and binary forms, with or without
@@ -31,8 +34,3 @@ OR FOR DIRECT, INDIRECT, SPECIAL, CONSEQUENTIAL, INCIDENTAL OR
 PUNITIVE DAMAGES, HOWEVER CAUSED AND REGARDLESS OF THE THEORY OF
 LIABILITY, ARISING OUT OF THE USE OF OR INABILITY TO USE THIS SOFTWARE,
 EVEN IF SUN HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
-
-You acknowledge that this software is not designed or intended for use
-in the design, construction, operation or maintenance of any nuclear
-facility.
-

ipmitool/debian/dirs

@@ -1,3 +1,4 @@
 usr/bin
-usr/lib/ipmitool
-usr/include/ipmitool
+usr/sbin
+usr/share/ipmitool
+usr/share/doc/ipmitool

ipmitool/debian/docs

@@ -0,0 +1,2 @@
+README
+AUTHORS

ipmitool/debian/ipmitool.ipmievd.init

@@ -0,0 +1,92 @@
+#! /bin/sh
+### BEGIN INIT INFO
+# Provides:          ipmievd
+# Required-Start:    $local_fs $remote_fs $syslog
+# Required-Stop:     $local_fs $remote_fs $syslog
+# Default-Start:     2 3 4 5
+# Default-Stop:      S 0 1 6
+# Short-Description: IPMI event daemon
+# Description:       ipmievd  is a daemon which will listen for events
+#                    from the BMC that are being sent to the SEL and
+#                    also log those messages to syslog.
+### END INIT INFO
+#
+# Author:	Elmar Hoffmann <elho@elho.net>
+# Licence:      This script is public domain using the same
+#               licence as ipmitool itself.
+# Modified by:  Petter Reinholdtsen
+
+set -e
+
+PATH=/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin
+DESC="IPMI event daemon"
+NAME=ipmievd
+DAEMON=/usr/sbin/$NAME
+PIDFILE=/var/run/$NAME.pid
+SCRIPTNAME=/etc/init.d/$NAME
+
+# Gracefully exit if the package has been removed.
+test -x $DAEMON || exit 0
+
+. /lib/lsb/init-functions
+. /etc/default/rcS
+
+# Options used by ipmievd.
+#
+# "open" uses the asynchronous event notification from the OpenIPMI
+# kernel driver, "sel" uses active polling of the contents of the SEL
+# for new events.
+#
+# Need to force 'daemon' mode, to make sure messages are sent to
+# syslog and the program forks into the background.
+#
+# Se ipmievd(8) for more info.
+IPMIEVD_OPTIONS="open daemon"
+
+# Read config file if it is present.
+[ -f /etc/default/$NAME ] && . /etc/default/$NAME
+
+#
+#	Function that starts the daemon/service.
+#
+d_start() {
+	start-stop-daemon --start --quiet --exec $DAEMON -- $IPMIEVD_OPTIONS
+}
+
+#
+#	Function that stops the daemon/service.
+#
+d_stop() {
+	start-stop-daemon --stop --quiet --name $NAME --exec $DAEMON
+}
+
+CODE=0
+
+case "$1" in
+  start)
+	[ "$VERBOSE" != no ] && log_begin_msg "Starting $DESC" "$NAME"
+	d_start || CODE=$?
+	[ "$VERBOSE" != no ] && log_end_msg $CODE
+	exit $CODE
+	;;
+  stop)
+	log_begin_msg "Stopping $DESC" "$NAME"
+	d_stop || CODE=$?
+	log_end_msg $CODE
+	exit $CODE
+	;;
+  restart|force-reload)
+	log_begin_msg "Restarting $DESC" "$NAME"
+	d_stop || true
+	sleep 1
+	d_start || CODE=$?
+	log_end_msg $CODE
+	exit $CODE
+	;;
+  *)
+	echo "Usage: $SCRIPTNAME {start|stop|restart|force-reload}" >&2
+	exit 1
+	;;
+esac
+
+exit 0

ipmitool/debian/rules

@@ -18,9 +18,9 @@ endif
 configure: configure-stamp
 configure-stamp:
 	dh_testdir
-	./configure --enable-intf-lan --enable-intf-open \
-		    --enable-ipmievd \
-		    --prefix=/usr --mandir=/usr/share/man
+	./configure --prefix=/usr \
+		    --with-kerneldir \
+		    --mandir=/usr/share/man
 	touch configure-stamp
 
 #Architecture 
@@ -41,10 +41,10 @@ build-indep-stamp: configure-stamp
 clean:
 	dh_testdir
 	dh_testroot
-	rm -f build-arch-stamp build-indep-stamp config-stamp
+	rm -f build-arch-stamp build-indep-stamp configure-stamp
 
 # Add here commands to clean up after the build process.
-	-$(MAKE) clean
+	-$(MAKE) distclean
 
 	dh_clean
 
@@ -71,6 +71,17 @@ install-arch:
 # debian/tmp.
 	$(MAKE) install DESTDIR=$(CURDIR)/debian/ipmitool
 
+	# No need to have two copies of the license text in the package.
+	$(RM) $(CURDIR)/debian/ipmitool/usr/share/doc/ipmitool/COPYING
+
+	# Move upstream changelog to correct filename.
+	mv $(CURDIR)/debian/ipmitool/usr/share/doc/ipmitool/ChangeLog \
+	  $(CURDIR)/debian/ipmitool/usr/share/doc/ipmitool/changelog
+
+	# Compress to avoid lintian warning.  Not sure why dh_compress
+	# isn't fixing this.
+	gzip -9 $(CURDIR)/debian/ipmitool/usr/share/doc/ipmitool/changelog
+
 #	dh_movefiles -a
 # Must not depend on anything. This is to be called by
 # binary-arch/binary-multi
@@ -78,27 +89,16 @@ install-arch:
 binary-common:
 	dh_testdir
 	dh_testroot
-#	dh_installdebconf	
-#	dh_installdocs
-#	dh_installexamples
-#	dh_installmenu
-#	dh_installemacsen
-#	dh_installpam
-#	dh_installinit
-#	dh_installcron
-#	dh_installmanpages
-#	dh_installinfo
-#	dh_undocumented
-#	dh_installchangelogs 
+	dh_installdocs
+	dh_installchangelogs 
+	dh_installinit --name ipmievd
 	dh_link
 	dh_strip
 	dh_compress 
 	dh_fixperms
-# You may want to make some executables suid here.
-#	dh_suidregister
 	dh_makeshlibs
+	dh_shlibdeps
 	dh_installdeb
-#	dh_perl
 	dh_gencontrol
 	dh_md5sums
 	dh_builddeb

ipmitool/debian/watch

@@ -0,0 +1,6 @@
+# Rename this file to "watch" and then you can run the "uscan" command
+# to check for upstream updates and more.
+# Site          Directory               Pattern                 Version Script
+version=2
+http://heanet.dl.sourceforge.net/sourceforge/ipmitool/ipmitool-(.*).tar.bz2
+# debian uupdate

ipmitool/doc/Makefile.am

@@ -27,13 +27,10 @@
 # PUNITIVE DAMAGES, HOWEVER CAUSED AND REGARDLESS OF THE THEORY OF
 # LIABILITY, ARISING OUT OF THE USE OF OR INABILITY TO USE THIS SOFTWARE,
 # EVEN IF SUN HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
-# 
-# You acknowledge that this software is not designed or intended for use
-# in the design, construction, operation or maintenance of any nuclear
-# facility.
 
 MAINTAINERCLEANFILES	= Makefile.in
 
-man_MANS		= ipmitool.1
+man_MANS		= ipmitool.1 ipmievd.8
 
 EXTRA_DIST		= $(man_MANS)
+

ipmitool/doc/ipmievd.8

@@ -0,0 +1,222 @@
+.TH "ipmievd" "8" "" "Duncan Laurie" ""
+.SH "NAME"
+ipmievd \- IPMI event daemon for sending events to syslog
+.SH "SYNOPSIS"
+ipmievd [\fB\-c\fR|\fB\-h\fR|\fB\-v\fR|\fB\-V\fR]
+\fB\-I\fR \fIopen\fP <\fIopen\fR | \fIsel\fR> [<\fIoption\fP>]
+
+ipmievd [\fB\-c\fR|\fB\-h\fR|\fB\-v\fR|\fB\-V\fR]
+\fB\-I\fR \fIlan\fP \fB\-H\fR <\fIhostname\fP>
+        [\fB\-p\fR <\fIport\fP>]
+        [\fB\-U\fR <\fIusername\fP>]
+        [\fB\-A\fR <\fIauthtype\fP>]
+        [\fB\-L\fR <\fIprivlvl\fP>]
+        [\fB\-a\fR|\fB\-E\fR|\fB\-P\fR|\fB\-f\fR <\fIpassword\fP>]
+        [\fB\-o\fR <\fIoemtype\fP>]
+        [\fB\-O\fR <\fIsel oem\fP>]
+        \fIsel\fP [<\fIoption\fP>]
+
+ipmievd [\fB\-c\fR|\fB\-h\fR|\fB\-v\fR|\fB\-V\fR]
+\fB\-I\fR \fIlanplus\fP \fB\-H\fR <\fIhostname\fP>
+        [\fB\-p\fR <\fIport\fP>]
+        [\fB\-U\fR <\fIusername\fP>]
+        [\fB\-L\fR <\fIprivlvl\fP>]
+        [\fB\-a\fR|\fB\-E\fR|\fB\-P\fR|\fB\-f\fR <\fIpassword\fP>]
+        [\fB\-o\fR <\fIoemtype\fP>]
+        [\fB\-O\fR <\fIsel oem\fP>]
+        [\fB\-C\fR <\fIciphersuite\fP>]
+        \fIsel\fR [<\fIoption\fP>]
+.SH "DESCRIPTION"
+\fBipmievd\fP is a daemon which will listen for events from the
+BMC that are being sent to the SEL and also log those messages to
+syslog.  It is able to run in one of two modes: either using the
+Event Message Buffer and asynchronous event notification from the
+OpenIPMI kernel driver or actively polling the contents of the
+SEL for new events.  Upon receipt of an event via either mechanism
+it will be logged to syslog with the \fILOG_LOCAL4\fP facility.
+
+It is based on the \fBipmitool\fR utility and shares the same IPMI
+interface support and session setup options.  Please see the
+\fBipmitool\fR manpage for more information on supported IPMI
+interfaces.
+.SH "OPTIONS"
+.TP 
+\fB\-a\fR
+Prompt for the remote server password.
+.TP 
+\fB\-A\fR <\fIauthtype\fP>
+Specify an authentication type to use during IPMIv1.5 \fIlan\fP
+session activation.  Supported types are NONE, PASSWORD, MD5, or OEM.
+.TP 
+\fB\-c\fR
+Present output in CSV (comma separated variable) format.  
+This is not available with all commands.
+.TP 
+\fB\-C\fR <\fIciphersuite\fP>
+The remote server authentication, integrity, and encryption algorithms
+to use for IPMIv2 \fIlanplus\fP connections.  See table 22\-19 in the
+IPMIv2 specification.  The default is 3 which specifies RAKP\-HMAC\-SHA1 
+authentication, HMAC\-SHA1\-96 integrity, and AES\-CBC\-128 encryption algorightms.
+.TP 
+\fB\-E\fR
+The remote server password is specified by the environment
+variable \fIIPMI_PASSWORD\fP.
+.TP 
+\fB\-f\fR <\fIpassword_file\fP>
+Specifies a file containing the remote server password. If this
+option is absent, or if password_file is empty, the password
+will default to NULL.
+.TP 
+\fB\-h\fR
+Get basic usage help from the command line.
+.TP 
+\fB\-H\fR <\fIaddress\fP>
+Remote server address, can be IP address or hostname.  This 
+option is required for \fIlan\fP and \fIlanplus\fP interfaces.
+.TP 
+\fB\-I\fR <\fIinterface\fP>
+Selects IPMI interface to use.  Supported interfaces that are
+compiled in are visible in the usage help output.
+.TP 
+\fB\-L\fR <\fIprivlvl\fP>
+Force session privilege level.  Can be CALLBACK, USER,
+OPERATOR, ADMIN. Default is ADMIN.
+.TP 
+\fB\-m\fR <\fIlocal_address\fP>
+Set the local IPMB address.  The default is 0x20 and there
+should be no need to change it for normal operation.
+.TP 
+\fB\-o\fR <\fIoemtype\fP>
+Select OEM type to support.  This usually involves minor hacks
+in place in the code to work around quirks in various BMCs from
+various manufacturers.  Use \fI\-o list\fP to see a list of
+current supported OEM types.
+.TP 
+\fB\-O\fR <\fIsel oem\fP>
+Open selected file and read OEM SEL event descriptions to be used
+during SEL listings.  See examples in contrib dir for file format.
+.TP
+\fB\-p\fR <\fIport\fP>
+Remote server UDP port to connect to.  Default is 623.
+.TP 
+\fB\-P\fR <\fIpassword\fP>
+Remote server password is specified on the command line.
+If supported it will be obscured in the process list. 
+\fBNote!\fR Specifying the password as a command line
+option is not recommended.
+.TP 
+\fB\-S\fR <\fIsdr_cache_file\fP>
+Use local file for remote SDR cache.  Using a local SDR cache
+can drastically increase performance for commands that require
+knowledge of the entire SDR to perform their function.
+.TP 
+\fB\-t\fR <\fItarget_address\fP>
+Bridge IPMI requests to the remote target address.
+.TP 
+\fB\-U\fR <\fIusername\fP>
+Remote server username, default is NULL user.
+.TP 
+\fB\-v\fR
+Increase verbose output level.  This option may be specified
+multiple times to increase the level of debug output.  If given
+three times you will get hexdumps of all incoming and
+outgoing packets.
+.TP 
+\fB\-V\fR
+Display version information.
+
+.LP 
+If no password method is specified then ipmievd will prompt the
+user for a password. If no password is entered at the prompt,
+the remote server password will default to NULL.
+.SH "COMMANDS"
+.TP 
+\fIhelp\fP
+This can be used to get command\-line help.  It may also be
+placed at the end of commands to get option usage help.
+
+> ipmievd help
+.br 
+Commands:
+    open    Use OpenIPMI for asyncronous notification of events
+    sel     Poll SEL for notification of events
+
+.TP 
+\fIopen\fP
+This command starts ipmievd with the OpenIPMI event watching
+mechanism which relies on the Event Message Buffer feature of
+IPMI.  This requires a properly installed and configured
+OpenIPMI driver on Linux and is only valid to be run through
+the \fIopen\fP interface.  See the \fBipmitool\fR manpage
+and associated documentation for more information on setting
+up the OpenIPMI driver.
+
+\fBNote\fR: Some BMC do not support the Event Message Buffer
+required for this command.  Other BMCs claim to support it but
+do not actually deliver events to it.  If this is the case please
+use the \fIsel\fP method.
+
+.RS
+.TP 
+\fIdaemon\fP
+Launch process as a daemon and reparent to init process.
+All messages will be sent to syslog.  This is the default action.
+.TP 
+\fInodaemon\fP
+Do NOT become a daemon, instead log all messages to stderr.
+.TP
+\fIpidfile\fP=<\fBfilename\fR>
+Save process ID to this file when in daemon mode.  Defaults to
+/var/run/ipmievd.pid.
+.RE
+
+.TP 
+\fIsel\fP
+This command starts ipmievd with the SEL Polling event watching
+mechanism.  This will poll the SEL periodically to determine if
+new events have been logged.  This command should work with all
+BMCs and is capable of using the LAN interface as well to monitor
+a remote system and log its events to a local syslog.
+
+.RS
+.TP 
+\fIdaemon\fP
+Launch process as a daemon and reparent to init process.
+All messages will be sent to syslog.  This is the default action.
+.TP 
+\fInodaemon\fP
+Do NOT become a daemon, instead log all messages to stderr.
+.TP
+\fIpidfile\fP=<\fBfilename\fR>
+Save process ID to this file when in daemon mode.  Defaults to
+/var/run/ipmievd.pid.
+.TP 
+\fItimeout\fP=<\fBseconds\fR>
+Time between checks for SEL polling method.  Default is 10 seconds.
+.RE
+.SH "EXAMPLES"
+.TP 
+\fIExample 1\fP: Daemon process watching OpenIPMI for events
+
+> ipmievd \-I open open daemon
+.TP 
+\fIExample 2\fP: Local non\-daemon process checking remote SEL every 30 seconds
+
+> ipmievd \-I lan \-H 1.2.3.4 \-f passfile sel nodaemon timeout=30
+.br 
+Reading Sensors...
+.br 
+Waiting for Events...
+.br 
+.SH "AUTHOR"
+Duncan Laurie <duncan@iceblink.org>
+.SH "SEE ALSO"
+.TP 
+IPMItool Homepage
+http://ipmitool.sourceforge.net
+.TP 
+Intelligent Platform Management Interface Specification
+http://www.intel.com/design/servers/ipmi
+.TP 
+OpenIPMI Homepage
+http://openipmi.sourceforge.net

ipmitool/include/Makefile.am

@@ -27,10 +27,6 @@
 # PUNITIVE DAMAGES, HOWEVER CAUSED AND REGARDLESS OF THE THEORY OF
 # LIABILITY, ARISING OUT OF THE USE OF OR INABILITY TO USE THIS SOFTWARE,
 # EVEN IF SUN HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
-# 
-# You acknowledge that this software is not designed or intended for use
-# in the design, construction, operation or maintenance of any nuclear
-# facility.
 
 MAINTAINERCLEANFILES = Makefile.in
 

ipmitool/include/ipmitool/Makefile.am

@@ -27,16 +27,14 @@
 # PUNITIVE DAMAGES, HOWEVER CAUSED AND REGARDLESS OF THE THEORY OF
 # LIABILITY, ARISING OUT OF THE USE OF OR INABILITY TO USE THIS SOFTWARE,
 # EVEN IF SUN HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
-# 
-# You acknowledge that this software is not designed or intended for use
-# in the design, construction, operation or maintenance of any nuclear
-# facility.
 
 MAINTAINERCLEANFILES = Makefile.in
 
-ipmitooldir = $(includedir)/ipmitool
-
-ipmitool_HEADERS = bswap.h helper.h ipmi.h ipmi_intf.h \
+noinst_HEADERS = log.h bswap.h helper.h ipmi.h ipmi_intf.h \
 	ipmi_chassis.h ipmi_entity.h ipmi_fru.h ipmi_lanp.h \
-	ipmi_sdr.h ipmi_sel.h ipmi_sol.h ipmi_bmc.h
+	ipmi_sdr.h ipmi_sel.h ipmi_sol.h ipmi_mc.h ipmi_raw.h \
+	ipmi_channel.h ipmi_sensor.h ipmi_event.h ipmi_session.h \
+	ipmi_strings.h ipmi_constants.h ipmi_user.h ipmi_pef.h \
+	ipmi_oem.h ipmi_isol.h ipmi_sunoem.h ipmi_picmg.h \
+	ipmi_fwum.h ipmi_main.h ipmi_tsol.h ipmi_firewall.h
 

ipmitool/include/ipmitool/bswap.h

@@ -28,28 +28,26 @@
  * PUNITIVE DAMAGES, HOWEVER CAUSED AND REGARDLESS OF THE THEORY OF
  * LIABILITY, ARISING OUT OF THE USE OF OR INABILITY TO USE THIS SOFTWARE,
  * EVEN IF SUN HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
- * 
- * You acknowledge that this software is not designed or intended for use
- * in the design, construction, operation or maintenance of any nuclear
- * facility.
  */
 
 #ifndef IPMI_BSWAP_H
 #define IPMI_BSWAP_H
 
-#if defined(__sun)
+#if HAVE_CONFIG_H
+# include <config.h>
+#endif
 
-#define BSWAP_16(x) ((((x) & 0xff00) >> 8) | (((x) & 0x00ff) << 8))
-#define BSWAP_32(x) ((((x) & 0xff000000) >> 24) | (((x) & 0x00ff0000) >>  8) |\
-                     (((x) & 0x0000ff00) <<  8) | (((x) & 0x000000ff) << 24))
+#undef BSWAP_16
+#undef BSWAP_32
 
+#if HAVE_BYTESWAP_H
+# include <byteswap.h>
+# define BSWAP_16(x) bswap_16(x)
+# define BSWAP_32(x) bswap_32(x)
 #else
-
-#include <byteswap.h>
-
-#define BSWAP_16(x) bswap_16(x)
-#define BSWAP_32(x) bswap_32(x)
-
+# define BSWAP_16(x) ((((x) & 0xff00) >> 8) | (((x) & 0x00ff) << 8))
+# define BSWAP_32(x) ((((x) & 0xff000000) >> 24) | (((x) & 0x00ff0000) >> 8) |\
+                     (((x) & 0x0000ff00) << 8) | (((x) & 0x000000ff) << 24))
 #endif
 
 #endif /* IPMI_BSWAP_H */

ipmitool/include/ipmitool/helper.h

@@ -28,31 +28,51 @@
  * PUNITIVE DAMAGES, HOWEVER CAUSED AND REGARDLESS OF THE THEORY OF
  * LIABILITY, ARISING OUT OF THE USE OF OR INABILITY TO USE THIS SOFTWARE,
  * EVEN IF SUN HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
- * 
- * You acknowledge that this software is not designed or intended for use
- * in the design, construction, operation or maintenance of any nuclear
- * facility.
  */
 
 #ifndef IPMI_HELPER_H
 #define IPMI_HELPER_H
 
+#include <sys/types.h>
+#include <inttypes.h>
+#include <stdio.h>
+#include <string.h>
+
 struct valstr {
-	unsigned char val;
+	uint16_t val;
 	const char * str;
 };
-const char * val2str(unsigned char val, const struct valstr * vs);
+const char * val2str(uint16_t val, const struct valstr * vs);
+uint16_t str2val(const char * str, const struct valstr * vs);
+void print_valstr(const struct valstr * vs, const char * title, int loglevel);
+void print_valstr_2col(const struct valstr * vs, const char * title, int loglevel);
 
-unsigned short buf2short(unsigned char * buf);
-unsigned long buf2long(unsigned char * buf);
-const char * buf2str(unsigned char * buf, int len);
-void printbuf(unsigned char * buf, int len, char * desc);
 
-void signal_handler(int sig, void * handler);
+uint16_t buf2short(uint8_t * buf);
+uint32_t buf2long(uint8_t * buf);
+const char * buf2str(uint8_t * buf, int len);
+void printbuf(const uint8_t * buf, int len, const char * desc);
+uint8_t ipmi_csum(uint8_t * d, int s);
+FILE * ipmi_open_file(const char * file, int rw);
+void ipmi_start_daemon(void);
 
-#define SIG_IGNORE(s)         ((void)signal((s), SIG_IGN))
-#define SIG_DEFAULT(s)        ((void)signal((s), SIG_DFL))
-#define SIG_HANDLE(s,h)       ((void)signal_handler((s), (h)))
+#define ipmi_open_file_read(file)	ipmi_open_file(file, 0)
+#define ipmi_open_file_write(file)	ipmi_open_file(file, 1)
+
+#ifndef __min
+# define __min(a, b)  ((a) < (b) ? (a) : (b))
+#endif
+
+#ifndef __max
+# define __max(a, b)  ((a) > (b) ? (a) : (b))
+#endif
+
+#ifndef __minlen
+# define __minlen(a, b) ({ int x=strlen(a); int y=strlen(b); (x < y) ? x : y;})
+#endif
+
+#ifndef __maxlen
+# define __maxlen(a, b) ({ int x=strlen(a); int y=strlen(b); (x > y) ? x : y;})
+#endif
 
 #endif /* IPMI_HELPER_H */
-

ipmitool/include/ipmitool/ipmi.h

@@ -28,10 +28,6 @@
  * PUNITIVE DAMAGES, HOWEVER CAUSED AND REGARDLESS OF THE THEORY OF
  * LIABILITY, ARISING OUT OF THE USE OF OR INABILITY TO USE THIS SOFTWARE,
  * EVEN IF SUN HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
- * 
- * You acknowledge that this software is not designed or intended for use
- * in the design, construction, operation or maintenance of any nuclear
- * facility.
  */
 
 #ifndef IPMI_H
@@ -39,75 +35,189 @@
 
 #include <stdlib.h>
 #include <stdio.h>
+#include <inttypes.h>
+#include <sys/types.h>
 #include <netinet/in.h>
 #include <ipmitool/helper.h>
 
-#define BUF_SIZE 256
+#define IPMI_BUF_SIZE 1024
+
+/* From table 13.16 of the IPMI v2 specification */
+#define IPMI_PAYLOAD_TYPE_IPMI               0x00
+#define IPMI_PAYLOAD_TYPE_SOL                0x01
+#define IPMI_PAYLOAD_TYPE_OEM                0x02
+#define IPMI_PAYLOAD_TYPE_RMCP_OPEN_REQUEST  0x10
+#define IPMI_PAYLOAD_TYPE_RMCP_OPEN_RESPONSE 0x11
+#define IPMI_PAYLOAD_TYPE_RAKP_1             0x12
+#define IPMI_PAYLOAD_TYPE_RAKP_2             0x13
+#define IPMI_PAYLOAD_TYPE_RAKP_3             0x14
+#define IPMI_PAYLOAD_TYPE_RAKP_4             0x15
 
 extern int verbose;
 extern int csv_output;
 
-struct ipmi_session {
-	unsigned char username[16];
-	unsigned char challenge[16];
-	unsigned char password;
-	unsigned char authtype;
-	unsigned char authcode[16];
-	unsigned char privlvl;
-	unsigned long in_seq;
-	unsigned long out_seq;
-	unsigned long id;
-	int active;
-};
-
 struct ipmi_rq {
 	struct {
-		unsigned char netfn;
-		unsigned char cmd;
-		unsigned short data_len;
-		unsigned char *data;
+		uint8_t netfn:6;
+		uint8_t lun:2;
+		uint8_t cmd;
+		uint8_t target_cmd;
+		uint16_t data_len;
+		uint8_t *data;
 	} msg;
 };
 
+/*
+ * This is what the sendrcv_v2() function would take as an argument. The common case
+ * is for payload_type to be IPMI_PAYLOAD_TYPE_IPMI.
+ */
+struct ipmi_v2_payload {
+	uint16_t payload_length;
+	uint8_t payload_type;
+
+	union {
+
+		struct {
+			uint8_t rq_seq;
+			struct ipmi_rq *request;
+		} ipmi_request;
+
+		struct {
+			uint8_t rs_seq;
+			struct ipmi_rs *response;
+		} ipmi_response;
+
+		/* Only used internally by the lanplus interface */
+		struct {
+			uint8_t *request;
+		} open_session_request;
+
+		/* Only used internally by the lanplus interface */
+		struct {
+			uint8_t *message;
+		} rakp_1_message;
+
+		/* Only used internally by the lanplus interface */
+		struct {
+			uint8_t *message;
+		} rakp_2_message;
+
+		/* Only used internally by the lanplus interface */
+		struct {
+			uint8_t *message;
+		} rakp_3_message;
+
+		/* Only used internally by the lanplus interface */
+		struct {
+			uint8_t *message;
+		} rakp_4_message;
+
+		struct {
+			uint8_t data[IPMI_BUF_SIZE];
+			uint16_t character_count;
+			uint8_t packet_sequence_number;
+			uint8_t acked_packet_number;
+			uint8_t accepted_character_count;
+			uint8_t is_nack;	/* bool */
+			uint8_t assert_ring_wor;	/* bool */
+			uint8_t generate_break;	/* bool */
+			uint8_t deassert_cts;	/* bool */
+			uint8_t deassert_dcd_dsr;	/* bool */
+			uint8_t flush_inbound;	/* bool */
+			uint8_t flush_outbound;	/* bool */
+		} sol_packet;
+
+	} payload;
+};
+
 struct ipmi_rq_entry {
 	struct ipmi_rq req;
-	struct ipmi_intf * intf;
-	struct ipmi_session * session;
-	unsigned char rq_seq;
-	unsigned char * msg_data;
+	struct ipmi_intf *intf;
+	uint8_t rq_seq;
+	uint8_t *msg_data;
 	int msg_len;
-	struct ipmi_rq_entry * next;
+	struct ipmi_rq_entry *next;
 };
 
 struct ipmi_rs {
-	unsigned char ccode;
-	unsigned char data[BUF_SIZE];
-	int data_len;
-	struct {
-		unsigned char authtype;
-		unsigned long seq;
-		unsigned long id;
-	} session;
-	unsigned char msglen;
-	struct {
-		unsigned char rq_addr;
-		unsigned char netfn;
-		unsigned char rq_lun;
-		unsigned char rs_addr;
-		unsigned char rq_seq;
-		unsigned char rs_lun;
-		unsigned char cmd;
-	} header;
-};
+	uint8_t ccode;
+	uint8_t data[IPMI_BUF_SIZE];
 
-struct ipmi_intf {
-	int fd;
-	struct sockaddr_in addr;
-	int abort;
-	int pedantic;
-	int (*open)(struct ipmi_intf *, char *, int, char *, char *);
-	void (*close)(struct ipmi_intf *);
-	struct ipmi_rs *(*sendrecv)(struct ipmi_intf *, struct ipmi_rq *);
+	/*
+	 * Looks like this is the length of the entire packet, including the RMCP
+	 * stuff, then modified to be the length of the extra IPMI message data
+	 */
+	int data_len;
+
+	struct {
+		uint8_t netfn;
+		uint8_t cmd;
+		uint8_t seq;
+		uint8_t lun;
+	} msg;
+
+	struct {
+		uint8_t authtype;
+		uint32_t seq;
+		uint32_t id;
+		uint8_t bEncrypted;	/* IPMI v2 only */
+		uint8_t bAuthenticated;	/* IPMI v2 only */
+		uint8_t payloadtype;	/* IPMI v2 only */
+		/* This is the total length of the payload or
+		   IPMI message.  IPMI v2.0 requires this to
+		   be 2 bytes.  Not really used for much. */
+		uint16_t msglen;
+	} session;
+
+	/*
+	 * A union of the different possible payload meta-data
+	 */
+	union {
+		struct {
+			uint8_t rq_addr;
+			uint8_t netfn;
+			uint8_t rq_lun;
+			uint8_t rs_addr;
+			uint8_t rq_seq;
+			uint8_t rs_lun;
+			uint8_t cmd;
+		} ipmi_response;
+		struct {
+			uint8_t message_tag;
+			uint8_t rakp_return_code;
+			uint8_t max_priv_level;
+			uint32_t console_id;
+			uint32_t bmc_id;
+			uint8_t auth_alg;
+			uint8_t integrity_alg;
+			uint8_t crypt_alg;
+		} open_session_response;
+		struct {
+			uint8_t message_tag;
+			uint8_t rakp_return_code;
+			uint32_t console_id;
+			uint8_t bmc_rand[16];	/* Random number generated by the BMC */
+			uint8_t bmc_guid[16];
+			uint8_t key_exchange_auth_code[20];
+		} rakp2_message;
+		struct {
+			uint8_t message_tag;
+			uint8_t rakp_return_code;
+			uint32_t console_id;
+			uint8_t integrity_check_value[20];
+		} rakp4_message;
+		struct {
+			uint8_t packet_sequence_number;
+			uint8_t acked_packet_number;
+			uint8_t accepted_character_count;
+			uint8_t is_nack;	/* bool */
+			uint8_t transfer_unavailable;	/* bool */
+			uint8_t sol_inactive;	/* bool */
+			uint8_t transmit_overrun;	/* bool */
+			uint8_t break_detected;	/* bool */
+		} sol_packet;
+
+	} payload;
 };
 
 #define IPMI_NETFN_CHASSIS		0x0
@@ -117,11 +227,13 @@ struct ipmi_intf {
 #define IPMI_NETFN_FIRMWARE		0x8
 #define IPMI_NETFN_STORAGE		0xa
 #define IPMI_NETFN_TRANSPORT		0xc
-#define IPMI_NETFN_SOL			0x34
+#define IPMI_NETFN_PICMG		0x2C
+#define IPMI_NETFN_ISOL			0x34
+#define IPMI_NETFN_TSOL			0x30
 
 #define IPMI_BMC_SLAVE_ADDR		0x20
 #define IPMI_REMOTE_SWID		0x81
 
-const struct valstr completion_code_vals[25];
+extern const struct valstr completion_code_vals[];
 
-#endif /* IPMI_H */
+#endif				/* IPMI_H */

ipmitool/include/ipmitool/ipmi_channel.h

@@ -0,0 +1,229 @@
+/*
+ * Copyright (c) 2003 Sun Microsystems, Inc.  All Rights Reserved.
+ * 
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 
+ * Redistribution of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 
+ * Redistribution in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * 
+ * Neither the name of Sun Microsystems, Inc. or the names of
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ * 
+ * This software is provided "AS IS," without a warranty of any kind.
+ * ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND WARRANTIES,
+ * INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A
+ * PARTICULAR PURPOSE OR NON-INFRINGEMENT, ARE HEREBY EXCLUDED.
+ * SUN MICROSYSTEMS, INC. ("SUN") AND ITS LICENSORS SHALL NOT BE LIABLE
+ * FOR ANY DAMAGES SUFFERED BY LICENSEE AS A RESULT OF USING, MODIFYING
+ * OR DISTRIBUTING THIS SOFTWARE OR ITS DERIVATIVES.  IN NO EVENT WILL
+ * SUN OR ITS LICENSORS BE LIABLE FOR ANY LOST REVENUE, PROFIT OR DATA,
+ * OR FOR DIRECT, INDIRECT, SPECIAL, CONSEQUENTIAL, INCIDENTAL OR
+ * PUNITIVE DAMAGES, HOWEVER CAUSED AND REGARDLESS OF THE THEORY OF
+ * LIABILITY, ARISING OUT OF THE USE OF OR INABILITY TO USE THIS SOFTWARE,
+ * EVEN IF SUN HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
+ */
+
+#ifndef IPMI_CHANNEL_H
+#define IPMI_CHANNEL_H
+
+#if HAVE_CONFIG_H
+# include <config.h>
+#endif
+#include <ipmitool/ipmi.h>
+
+
+#define IPMI_GET_CHANNEL_AUTH_CAP      0x38
+#define IPMI_GET_CHANNEL_ACCESS        0x41
+#define IPMI_GET_CHANNEL_INFO          0x42
+#define IPMI_SET_USER_ACCESS           0x43
+#define IPMI_GET_USER_ACCESS           0x44
+#define IPMI_SET_USER_NAME             0x45
+#define IPMI_GET_USER_NAME             0x46
+#define IPMI_SET_USER_PASSWORD         0x47
+#define IPMI_GET_CHANNEL_CIPHER_SUITES 0x54
+
+
+/*
+ * The Get Authentication Capabilities response structure
+ * From table 22-15 of the IPMI v2.0 spec
+ */
+struct get_channel_auth_cap_rsp {
+	uint8_t channel_number;
+#if WORDS_BIGENDIAN
+	uint8_t v20_data_available : 1; /* IPMI v2.0 data is available */
+	uint8_t __reserved1        : 1; 
+	uint8_t enabled_auth_types : 6; /* IPMI v1.5 enabled auth types */
+#else
+	uint8_t enabled_auth_types : 6; /* IPMI v1.5 enabled auth types */
+	uint8_t __reserved1        : 1;
+	uint8_t v20_data_available : 1; /* IPMI v2.0 data is available */
+#endif
+#if WORDS_BIGENDIAN
+	uint8_t __reserved2        : 2;
+	uint8_t kg_status          : 1; /* two-key login status */
+	uint8_t per_message_auth   : 1; /* per-message authentication status */
+	uint8_t user_level_auth    : 1; /* user-level authentication status */
+	uint8_t non_null_usernames : 1; /* one or more non-null users exist */
+	uint8_t null_usernames     : 1; /* one or more null usernames non-null pwds */
+	uint8_t anon_login_enabled : 1; /* a null-named, null-pwd user exists */
+#else
+	uint8_t anon_login_enabled : 1; /* a null-named, null-pwd user exists */
+	uint8_t null_usernames     : 1; /* one or more null usernames non-null pwds */
+	uint8_t non_null_usernames : 1; /* one or more non-null users exist */
+	uint8_t user_level_auth    : 1; /* user-level authentication status */
+	uint8_t per_message_auth   : 1; /* per-message authentication status */
+	uint8_t kg_status          : 1; /* two-key login status */
+	uint8_t __reserved2        : 2;
+#endif
+#if WORDS_BIGENDIAN
+	uint8_t __reserved3        : 6;
+	uint8_t ipmiv15_support    : 1; /* channel supports IPMI v1.5 connections */
+	uint8_t ipmiv20_support    : 1; /* channel supports IPMI v2.0 connections */
+#else
+	uint8_t ipmiv20_support    : 1; /* channel supports IPMI v2.0 connections */
+	uint8_t ipmiv15_support    : 1; /* channel supports IPMI v1.5 connections */
+	uint8_t __reserved3        : 6;
+#endif
+	uint8_t oem_id[3];    /* IANA enterprise number for auth type */
+	uint8_t oem_aux_data; /* Additional OEM specific data for oem auths */
+} __attribute__ ((packed));
+
+
+
+/*
+ * The Get Channel Info response structure
+ * From table 22-29 of the IPMI v2.0 spec
+ */
+struct get_channel_info_rsp {
+#if WORDS_BIGENDIAN
+	uint8_t __reserved1       : 4; 
+	uint8_t channel_number    : 4; /* channel number */
+#else
+	uint8_t channel_number    : 4; /* channel number */
+	uint8_t __reserved1       : 4; 
+#endif
+#if WORDS_BIGENDIAN
+	uint8_t __reserved2       : 1;
+	uint8_t channel_medium    : 7; /* Channel medium type per table 6-3 */
+#else
+	uint8_t channel_medium    : 7; /* Channel medium type per table 6-3 */
+	uint8_t __reserved2       : 1;
+#endif
+#if WORDS_BIGENDIAN
+	uint8_t __reserved3       : 3;
+	uint8_t channel_protocol  : 5; /* Channel protocol per table 6-2 */
+#else
+	uint8_t channel_protocol  : 5; /* Channel protocol per table 6-2 */
+	uint8_t __reserved3       : 3;
+#endif
+#if WORDS_BIGENDIAN
+	uint8_t session_support   : 2; /* Description of session support */
+	uint8_t active_sessions   : 6; /* Count of active sessions */
+#else
+	uint8_t active_sessions   : 6; /* Count of active sessions */
+	uint8_t session_support   : 2; /* Description of session support */
+#endif
+	uint8_t vendor_id[3]; /* For OEM that specified the protocol */
+	uint8_t aux_info[2];  /* Not used*/
+} __attribute__ ((packed));
+
+
+
+/*
+ * The Get Channel Access response structure
+ * From table 22-28 of the IPMI v2.0 spec
+ */
+struct get_channel_access_rsp {
+#if WORDS_BIGENDIAN
+	uint8_t __reserved1        : 2;
+	uint8_t alerting           : 1;
+	uint8_t per_message_auth   : 1;
+	uint8_t user_level_auth    : 1;
+	uint8_t access_mode        : 3;
+#else
+	uint8_t access_mode        : 3;
+	uint8_t user_level_auth    : 1;
+	uint8_t per_message_auth   : 1;
+	uint8_t alerting           : 1;
+	uint8_t __reserved1        : 2;
+#endif
+#if WORDS_BIGENDIAN
+	uint8_t __reserved2        : 4;
+	uint8_t channel_priv_limit : 4; /* Channel privilege level limit */
+#else
+	uint8_t channel_priv_limit : 4; /* Channel privilege level limit */
+	uint8_t __reserved2        : 4;
+#endif
+} __attribute__ ((packed));
+
+
+struct get_user_access_rsp {
+#if WORDS_BIGENDIAN
+	uint8_t __reserved1        : 2;
+	uint8_t max_user_ids       : 6;
+	uint8_t __reserved2        : 2;
+	uint8_t enabled_user_ids   : 6;
+	uint8_t __reserved3        : 2;
+	uint8_t fixed_user_ids     : 6;
+	uint8_t __reserved4        : 1;
+	uint8_t callin_callback    : 1;
+	uint8_t link_auth          : 1;
+	uint8_t ipmi_messaging     : 1;
+	uint8_t privilege_limit    : 4;
+#else
+	uint8_t max_user_ids       : 6;
+	uint8_t __reserved1        : 2;
+	uint8_t enabled_user_ids   : 6;
+	uint8_t __reserved2        : 2;
+	uint8_t fixed_user_ids     : 6;
+	uint8_t __reserved3        : 2;
+	uint8_t privilege_limit    : 4;
+	uint8_t ipmi_messaging     : 1;
+	uint8_t link_auth          : 1;
+	uint8_t callin_callback    : 1;
+	uint8_t __reserved4        : 1;
+#endif
+} __attribute__ ((packed));
+
+struct set_user_access_data {
+#if WORDS_BIGENDIAN
+	uint8_t change_bits        : 1;
+	uint8_t callin_callback    : 1;
+	uint8_t link_auth          : 1;
+	uint8_t ipmi_messaging     : 1;
+	uint8_t channel            : 4;
+	uint8_t __reserved1        : 2;
+	uint8_t user_id            : 6;
+	uint8_t __reserved2        : 4;
+	uint8_t privilege_limit    : 4;
+	uint8_t __reserved3        : 4;
+	uint8_t session_limit      : 4;
+#else
+	uint8_t channel            : 4;
+	uint8_t ipmi_messaging     : 1;
+	uint8_t link_auth          : 1;
+	uint8_t callin_callback    : 1;
+	uint8_t change_bits        : 1;
+	uint8_t user_id            : 6;
+	uint8_t __reserved1        : 2;
+	uint8_t privilege_limit    : 4;
+	uint8_t __reserved2        : 4;
+	uint8_t session_limit      : 4;
+	uint8_t __reserved3        : 4;
+#endif
+} __attribute__ ((packed));
+
+uint8_t ipmi_get_channel_medium(struct ipmi_intf * intf, uint8_t channel);
+uint8_t ipmi_current_channel_medium(struct ipmi_intf * intf);
+int ipmi_channel_main(struct ipmi_intf * intf, int argc, char ** argv);
+int ipmi_get_channel_auth_cap(struct ipmi_intf * intf, uint8_t channel, uint8_t priv);
+int ipmi_get_channel_info(struct ipmi_intf * intf, uint8_t channel);
+
+#endif /*IPMI_CHANNEL_H*/

ipmitool/include/ipmitool/ipmi_chassis.h

@@ -28,10 +28,6 @@
  * PUNITIVE DAMAGES, HOWEVER CAUSED AND REGARDLESS OF THE THEORY OF
  * LIABILITY, ARISING OUT OF THE USE OF OR INABILITY TO USE THIS SOFTWARE,
  * EVEN IF SUN HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
- * 
- * You acknowledge that this software is not designed or intended for use
- * in the design, construction, operation or maintenance of any nuclear
- * facility.
  */
 
 #ifndef IPMI_CHASSIS_H
@@ -51,6 +47,9 @@
 #define IPMI_CHASSIS_POLICY_PREVIOUS	0x1
 #define IPMI_CHASSIS_POLICY_ALWAYS_OFF	0x0
 
-int ipmi_chassis_main(struct ipmi_intf *, int, char **);
+int ipmi_chassis_power_status(struct ipmi_intf * intf);
+int ipmi_chassis_power_control(struct ipmi_intf * intf, uint8_t ctl);
+int ipmi_chassis_main(struct ipmi_intf * intf, int argc, char ** argv);
+int ipmi_power_main(struct ipmi_intf * intf, int argc, char ** argv);
 
 #endif /*IPMI_CHASSIS_H*/

ipmitool/include/ipmitool/ipmi_constants.h

@@ -0,0 +1,123 @@
+/*
+ * Copyright (c) 2003 Sun Microsystems, Inc.  All Rights Reserved.
+ * 
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 
+ * Redistribution of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 
+ * Redistribution in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * 
+ * Neither the name of Sun Microsystems, Inc. or the names of
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ * 
+ * This software is provided "AS IS," without a warranty of any kind.
+ * ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND WARRANTIES,
+ * INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A
+ * PARTICULAR PURPOSE OR NON-INFRINGEMENT, ARE HEREBY EXCLUDED.
+ * SUN MICROSYSTEMS, INC. ("SUN") AND ITS LICENSORS SHALL NOT BE LIABLE
+ * FOR ANY DAMAGES SUFFERED BY LICENSEE AS A RESULT OF USING, MODIFYING
+ * OR DISTRIBUTING THIS SOFTWARE OR ITS DERIVATIVES.  IN NO EVENT WILL
+ * SUN OR ITS LICENSORS BE LIABLE FOR ANY LOST REVENUE, PROFIT OR DATA,
+ * OR FOR DIRECT, INDIRECT, SPECIAL, CONSEQUENTIAL, INCIDENTAL OR
+ * PUNITIVE DAMAGES, HOWEVER CAUSED AND REGARDLESS OF THE THEORY OF
+ * LIABILITY, ARISING OUT OF THE USE OF OR INABILITY TO USE THIS SOFTWARE,
+ * EVEN IF SUN HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
+ */
+
+#ifndef IPMI_CONSTANTS_H
+#define IPMI_CONSTANTS_H
+
+
+/*
+ * COMMANDS
+ */
+#define IPMI_GET_SDR_REPOSITORY_INFO            0x20
+#define IMPI_SOL_ACTIVATING                     0x20
+#define IMPI_SET_SOL_CONFIG_PARAMETERS          0x21
+#define IMPI_GET_SOL_CONFIG_PARAMETERS          0x22
+#define IPMI_SET_USER_ACCESS                    0x43
+#define IPMI_GET_USER_ACCESS                    0x44
+#define IPMI_SET_USER_NAME                      0x45
+#define IPMI_GET_USER_NAME                      0x46
+#define IPMI_SET_USER_PASSWORD                  0x47
+#define IPMI_ACTIVATE_PAYLOAD                   0x48
+#define IPMI_DEACTIVATE_PAYLOAD                 0x49
+#define IPMI_SUSPEND_RESUME_PAYLOAD_ENCRYPTYION 0x55
+#define IPMI_GET_SEL_TIME                       0x48
+#define IPMI_SET_SEL_TIME                       0x49
+
+#define IPMI_1_5_AUTH_TYPE_BIT_NONE     0x01
+#define IPMI_1_5_AUTH_TYPE_BIT_MD2      0x02
+#define IPMI_1_5_AUTH_TYPE_BIT_MD5      0x04
+#define IPMI_1_5_AUTH_TYPE_BIT_PASSWORD 0x10
+#define IPMI_1_5_AUTH_TYPE_BIT_OEM      0x20
+
+#define IPMI_SESSION_AUTHTYPE_NONE      0x0
+#define IPMI_SESSION_AUTHTYPE_MD2       0x1
+#define IPMI_SESSION_AUTHTYPE_MD5   	0x2
+#define IPMI_SESSION_AUTHTYPE_KEY	0x4
+#define IPMI_SESSION_AUTHTYPE_PASSWORD	IPMI_SESSION_AUTHTYPE_KEY
+#define IPMI_SESSION_AUTHTYPE_OEM       0x5
+#define IPMI_SESSION_AUTHTYPE_RMCP_PLUS 0x6
+
+#define IPMI_SESSION_PRIV_UNSPECIFIED   0x0
+#define IPMI_SESSION_PRIV_CALLBACK	0x1
+#define IPMI_SESSION_PRIV_USER		0x2
+#define IPMI_SESSION_PRIV_OPERATOR	0x3
+#define IPMI_SESSION_PRIV_ADMIN		0x4
+#define IPMI_SESSION_PRIV_OEM		0x5
+
+#define IPMI_SET_IN_PROGRESS_SET_COMPLETE 0x00
+#define IPMI_SET_IN_PROGRESS_IN_PROGRESS  0x01
+#define IPMI_SET_IN_PROGRESS_COMMIT_WRITE 0x02
+
+#define IPMI_CHANNEL_MEDIUM_RESERVED	0x0
+#define IPMI_CHANNEL_MEDIUM_IPMB_I2C	0x1
+#define IPMI_CHANNEL_MEDIUM_ICMB_1	0x2
+#define IPMI_CHANNEL_MEDIUM_ICMB_09	0x3
+#define IPMI_CHANNEL_MEDIUM_LAN		0x4
+#define IPMI_CHANNEL_MEDIUM_SERIAL	0x5
+#define IPMI_CHANNEL_MEDIUM_LAN_OTHER	0x6
+#define IPMI_CHANNEL_MEDIUM_SMBUS_PCI	0x7
+#define IPMI_CHANNEL_MEDIUM_SMBUS_1	0x8
+#define IPMI_CHANNEL_MEDIUM_SMBUS_2	0x9
+#define IPMI_CHANNEL_MEDIUM_USB_1	0xa
+#define IPMI_CHANNEL_MEDIUM_USB_2	0xb
+#define IPMI_CHANNEL_MEDIUM_SYSTEM	0xc
+
+#define IPMI_CHASSIS_CTL_POWER_DOWN	0x0
+#define IPMI_CHASSIS_CTL_POWER_UP	0x1
+#define IPMI_CHASSIS_CTL_POWER_CYCLE	0x2
+#define IPMI_CHASSIS_CTL_HARD_RESET	0x3
+#define IPMI_CHASSIS_CTL_PULSE_DIAG	0x4
+#define IPMI_CHASSIS_CTL_ACPI_SOFT	0x5
+
+#define IPMI_CHASSIS_POLICY_NO_CHANGE	0x3
+#define IPMI_CHASSIS_POLICY_ALWAYS_ON	0x2
+#define IPMI_CHASSIS_POLICY_PREVIOUS	0x1
+#define IPMI_CHASSIS_POLICY_ALWAYS_OFF	0x0
+
+/* From table 13-17 of the IPMI v2 specification */
+#define IPMI_AUTH_RAKP_NONE         0x00
+#define IPMI_AUTH_RAKP_HMAC_SHA1    0x01
+#define IPMI_AUTH_RAKP_HMAC_MD5     0x02
+
+/* From table 13-18 of the IPMI v2 specification */
+#define IPMI_INTEGRITY_NONE         0x00
+#define IPMI_INTEGRITY_HMAC_SHA1_96 0x01
+#define IPMI_INTEGRITY_HMAC_MD5_128 0x02
+#define IPMI_INTEGRITY_MD5_128      0x03
+
+/* From table 13-19 of the IPMI v2 specfication */
+#define IPMI_CRYPT_NONE             0x00
+#define IPMI_CRYPT_AES_CBC_128      0x01
+#define IPMI_CRYPT_XRC4_128         0x02
+#define IPMI_CRYPT_XRC4_40          0x03
+
+#endif /*IPMI_CONSTANTS_H*/

ipmitool/include/ipmitool/ipmi_entity.h

@@ -28,61 +28,20 @@
  * PUNITIVE DAMAGES, HOWEVER CAUSED AND REGARDLESS OF THE THEORY OF
  * LIABILITY, ARISING OUT OF THE USE OF OR INABILITY TO USE THIS SOFTWARE,
  * EVEN IF SUN HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
- * 
- * You acknowledge that this software is not designed or intended for use
- * in the design, construction, operation or maintenance of any nuclear
- * facility.
  */
 
 #ifndef IPMI_ENTITY_H
 #define IPMI_ENTITY_H
 
-#include <ipmitool/helper.h>
-
-const struct valstr entity_id_vals[] __attribute__((unused)) = {
-	{ 0x00, "Unspecified" },
-	{ 0x01, "Other" },
-	{ 0x02, "Unknown" },
-	{ 0x03, "Processor" },
-	{ 0x04, "Disk or Disk Bay" },
-	{ 0x05, "Peripheral Bay" },
-	{ 0x06, "System Management Module" },
-	{ 0x07, "System Board" },
-	{ 0x08, "Memory Module" },
-	{ 0x09, "Processor Module" },
-	{ 0x0a, "Power Supply" },
-	{ 0x0b, "Add-in Card" },
-	{ 0x0c, "Front Panel Board" },
-	{ 0x0d, "Back Panel Board" },
-	{ 0x0e, "Power System Board" },
-	{ 0x0f, "Drive Backplane" },
-	{ 0x10, "System Internal Expansion Board" },
-	{ 0x11, "Other System Board" },
-	{ 0x12, "Processor Board" },
-	{ 0x13, "Power Unit" },
-	{ 0x14, "Power Module" },
-	{ 0x15, "Power Management" },
-	{ 0x16, "Chassis Back Panel Board" },
-	{ 0x17, "System Chassis" },
-	{ 0x18, "Sub-Chassis" },
-	{ 0x19, "Other Chassis Board" },
-	{ 0x1a, "Disk Drive Bay" },
-	{ 0x1b, "Peripheral Bay" },
-	{ 0x1c, "Device Bay" },
-	{ 0x1d, "Fan Device" },
-	{ 0x1e, "Cooling Unit" },
-	{ 0x1f, "Cable/Interconnect" },
-	{ 0x20, "Memory Device" },
-	{ 0x21, "System Management Software" },
-	{ 0x22, "BIOS" },
-	{ 0x23, "Operating System" },
-	{ 0x24, "System Bus" },
-	{ 0x25, "Group" },
-	{ 0x26, "Remote Management Device" },
-	{ 0x27, "External Environment" },
-	{ 0x28, "Battery" },
-	{ 0x00, NULL },
-};
+struct entity_id {
+	uint8_t	id;			/* physical entity id */
+#if WORDS_BIGENDIAN
+	uint8_t	logical     : 1;	/* physical/logical */
+	uint8_t	instance    : 7;	/* instance number */
+#else
+	uint8_t	instance    : 7;	/* instance number */
+	uint8_t	logical     : 1;	/* physical/logical */
+#endif
+} __attribute__ ((packed));
 
 #endif /* IPMI_ENTITY_H */
-

ipmitool/include/ipmitool/ipmi_event.h

@@ -0,0 +1,60 @@
+/*
+ * Copyright (c) 2003 Sun Microsystems, Inc.  All Rights Reserved.
+ * 
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 
+ * Redistribution of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 
+ * Redistribution in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * 
+ * Neither the name of Sun Microsystems, Inc. or the names of
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ * 
+ * This software is provided "AS IS," without a warranty of any kind.
+ * ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND WARRANTIES,
+ * INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A
+ * PARTICULAR PURPOSE OR NON-INFRINGEMENT, ARE HEREBY EXCLUDED.
+ * SUN MICROSYSTEMS, INC. ("SUN") AND ITS LICENSORS SHALL NOT BE LIABLE
+ * FOR ANY DAMAGES SUFFERED BY LICENSEE AS A RESULT OF USING, MODIFYING
+ * OR DISTRIBUTING THIS SOFTWARE OR ITS DERIVATIVES.  IN NO EVENT WILL
+ * SUN OR ITS LICENSORS BE LIABLE FOR ANY LOST REVENUE, PROFIT OR DATA,
+ * OR FOR DIRECT, INDIRECT, SPECIAL, CONSEQUENTIAL, INCIDENTAL OR
+ * PUNITIVE DAMAGES, HOWEVER CAUSED AND REGARDLESS OF THE THEORY OF
+ * LIABILITY, ARISING OUT OF THE USE OF OR INABILITY TO USE THIS SOFTWARE,
+ * EVEN IF SUN HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
+ */
+
+#ifndef IPMI_EVENT_H
+#define IPMI_EVENT_H
+
+#if HAVE_CONFIG_H
+# include <config.h>
+#endif
+#include <ipmitool/ipmi.h>
+
+#define EVENT_DIR_ASSERT	0
+#define EVENT_DIR_DEASSERT	1
+
+struct platform_event_msg {
+	uint8_t evm_rev;
+	uint8_t sensor_type;
+	uint8_t sensor_num;
+#if WORDS_BIGENDIAN
+	uint8_t event_dir  : 1;
+	uint8_t event_type : 7;
+#else
+	uint8_t event_type : 7;
+	uint8_t event_dir  : 1;
+#endif
+	uint8_t event_data[3];
+} __attribute__((packed));
+
+int  ipmi_event_main(struct ipmi_intf *, int, char **);
+
+#endif /*IPMI_EVENT_H*/

ipmitool/include/ipmitool/ipmi_firewall.h

@@ -0,0 +1,111 @@
+/*
+ * Copyright (c) 2003 Sun Microsystems, Inc.  All Rights Reserved.
+ * 
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 
+ * Redistribution of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 
+ * Redistribution in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * 
+ * Neither the name of Sun Microsystems, Inc. or the names of
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ * 
+ * This software is provided "AS IS," without a warranty of any kind.
+ * ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND WARRANTIES,
+ * INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A
+ * PARTICULAR PURPOSE OR NON-INFRINGEMENT, ARE HEREBY EXCLUDED.
+ * SUN MICROSYSTEMS, INC. ("SUN") AND ITS LICENSORS SHALL NOT BE LIABLE
+ * FOR ANY DAMAGES SUFFERED BY LICENSEE AS A RESULT OF USING, MODIFYING
+ * OR DISTRIBUTING THIS SOFTWARE OR ITS DERIVATIVES.  IN NO EVENT WILL
+ * SUN OR ITS LICENSORS BE LIABLE FOR ANY LOST REVENUE, PROFIT OR DATA,
+ * OR FOR DIRECT, INDIRECT, SPECIAL, CONSEQUENTIAL, INCIDENTAL OR
+ * PUNITIVE DAMAGES, HOWEVER CAUSED AND REGARDLESS OF THE THEORY OF
+ * LIABILITY, ARISING OUT OF THE USE OF OR INABILITY TO USE THIS SOFTWARE,
+ * EVEN IF SUN HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
+ * 
+ * You acknowledge that this software is not designed or intended for use
+ * in the design, construction, operation or maintenance of any nuclear
+ * facility.
+ */
+
+#ifndef IPMI_FIREWALL_H
+#define IPMI_FIREWALL_H
+
+#include <ipmitool/ipmi.h>
+
+int ipmi_firewall_main(struct ipmi_intf *, int, char **);
+
+#define BMC_GET_NETFN_SUPPORT				0x09
+#define BMC_GET_COMMAND_SUPPORT				0x0A
+#define BMC_GET_COMMAND_SUBFUNCTION_SUPPORT		0x0B
+#define BMC_GET_CONFIGURABLE_COMMANDS			0x0C
+#define BMC_GET_CONFIGURABLE_COMMAND_SUBFUNCTIONS 	0x0D
+#define BMC_SET_COMMAND_ENABLES				0x60
+#define BMC_GET_COMMAND_ENABLES				0x61
+#define BMC_SET_COMMAND_SUBFUNCTION_ENABLES		0x62
+#define BMC_GET_COMMAND_SUBFUNCTION_ENABLES		0x63
+#define BMC_OEM_NETFN_IANA_SUPPORT			0x64
+
+#define SET_COMMAND_ENABLE_BYTE (BMC_SET_COMMAND_ENABLES / 8)
+#define SET_COMMAND_ENABLE_BIT (BMC_SET_COMMAND_ENABLES % 8)
+
+#define MAX_LUN 4
+#define MAX_NETFN 64
+#define MAX_NETFN_PAIR (MAX_NETFN/2)
+#define MAX_COMMAND 256
+#define MAX_SUBFN 32
+#define MAX_COMMAND_BYTES (MAX_COMMAND>>3)
+#define MAX_SUBFN_BYTES (MAX_SUBFN>>3)
+
+// support is a bitfield with the following bits set...
+#define BIT_AVAILABLE 0x01
+#define BIT_CONFIGURABLE 0x02
+#define BIT_ENABLED 0x04
+
+extern int verbose;
+
+struct command_support {
+	unsigned char support;
+	unsigned char version[3];
+	unsigned char subfn_support[MAX_SUBFN_BYTES];
+	unsigned char subfn_config[MAX_SUBFN_BYTES];
+	unsigned char subfn_enable[MAX_SUBFN_BYTES];
+};
+struct lun_netfn_support {
+	unsigned char support;
+	struct command_support command[MAX_COMMAND];
+	unsigned char command_mask[MAX_COMMAND_BYTES];
+	unsigned char config_mask[MAX_COMMAND_BYTES];
+	unsigned char enable_mask[MAX_COMMAND_BYTES];
+};
+struct lun_support {
+	unsigned char support;
+	struct lun_netfn_support netfn[MAX_NETFN_PAIR];
+};
+struct bmc_fn_support {
+	struct lun_support lun[MAX_LUN];
+};
+struct ipmi_function_params {
+	int channel;
+	int lun;
+	int netfn;
+	int command;
+	int subfn;
+	unsigned char force;
+};
+
+static inline int bit_test(const unsigned char * bf, int n) {
+	return !!(bf[n>>3]&(1<<(n%8)));
+}
+static inline void bit_set(unsigned char * bf, int n, int v) {
+	bf[n>>3] = (bf[n>>3] & ~(1<<(n%8))) | ((v?1:0)<<(n%8));
+}
+
+#endif				/*IPMI_FIREWALL_H */
+

ipmitool/include/ipmitool/ipmi_fru.h

@@ -28,16 +28,18 @@
  * PUNITIVE DAMAGES, HOWEVER CAUSED AND REGARDLESS OF THE THEORY OF
  * LIABILITY, ARISING OUT OF THE USE OF OR INABILITY TO USE THIS SOFTWARE,
  * EVEN IF SUN HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
- * 
- * You acknowledge that this software is not designed or intended for use
- * in the design, construction, operation or maintenance of any nuclear
- * facility.
  */
 
 #ifndef IPMI_FRU_H
 #define IPMI_FRU_H
 
+#include <inttypes.h>
 #include <ipmitool/ipmi.h>
+#include <ipmitool/ipmi_sdr.h>
+
+#if HAVE_CONFIG_H
+# include <config.h>
+#endif
 
 #define GET_FRU_INFO		0x10
 #define GET_FRU_DATA		0x11
@@ -59,66 +61,258 @@ enum {
 };
 
 struct fru_info {
-	unsigned short size;
-	unsigned char access : 1;
+	uint16_t size;
+	uint8_t access:1;
 } __attribute__ ((packed));
 
 struct fru_header {
-	unsigned char version;
+	uint8_t version;
 	struct {
-		unsigned char internal;
-		unsigned char chassis;
-		unsigned char board;
-		unsigned char product;
-		unsigned char multi;
+		uint8_t internal;
+		uint8_t chassis;
+		uint8_t board;
+		uint8_t product;
+		uint8_t multi;
 	} offset;
-	unsigned char pad;
-	unsigned char checksum;
+	uint8_t pad;
+	uint8_t checksum;
 } __attribute__ ((packed));
 
 struct fru_area_chassis {
-	unsigned char area_ver;
-	unsigned char area_len;
-	unsigned char type;
-	char * part;
-	char * serial;
+	uint8_t area_ver;
+	uint8_t type;
+	uint16_t area_len;
+	char *part;
+	char *serial;
 };
 
 struct fru_area_board {
-	unsigned char	area_ver;
-	unsigned char area_len;
-	unsigned char lang;
-	unsigned long mfg_date_time;
-	char * mfg;
-	char * prod;
-	char * serial;
-	char * part;
+	uint8_t area_ver;
+	uint8_t lang;
+	uint16_t area_len;
+	uint32_t mfg_date_time;
+	char *mfg;
+	char *prod;
+	char *serial;
+	char *part;
+	char *fru;
 };
 
 struct fru_area_product {
-	unsigned char area_ver;
-	unsigned char area_len;
-	unsigned char lang;
-	char * mfg;
-	char * name;
-	char * part;
-	char * version;
-	char * serial;
-	char * asset;
+	uint8_t area_ver;
+	uint8_t lang;
+	uint16_t area_len;
+	char *mfg;
+	char *name;
+	char *part;
+	char *version;
+	char *serial;
+	char *asset;
+	char *fru;
 };
 
-static const char * chassis_type_desc[] __attribute__((unused)) = {
-	"Unspecified", "Other", "Unknown",
-	"Desktop", "Low Profile Desktop", "Pizza Box",
-	"Mini Tower", "Tower",
-	"Portable", "LapTop", "Notebook", "Hand Held", "Docking Station",
-	"All in One", "Sub Notebook", "Space-saving", "Lunch Box",
-	"Main Server Chassis", "Expansion Chassis", "SubChassis",
-	"Bus Expansion Chassis", "Peripheral Chassis", "RAID Chassis",
-	"Rack Mount Chassis"
-};
+struct fru_multirec_header {
+#define FRU_RECORD_TYPE_POWER_SUPPLY_INFORMATION 0x00
+#define FRU_RECORD_TYPE_DC_OUTPUT 0x01
+#define FRU_RECORD_TYPE_DC_LOAD 0x02
+#define FRU_RECORD_TYPE_MANAGEMENT_ACCESS 0x03
+#define FRU_RECORD_TYPE_BASE_COMPATIBILITY 0x04
+#define FRU_RECORD_TYPE_EXTENDED_COMPATIBILITY 0x05
+#define FRU_RECORD_TYPE_PICMG_EXTENSION	0xc0
+	uint8_t type;
+	uint8_t format;
+	uint8_t len;
+	uint8_t record_checksum;
+	uint8_t header_checksum;
+} __attribute__ ((packed));
 
-void ipmi_print_fru(struct ipmi_intf *, unsigned char);
-int ipmi_fru_main(struct ipmi_intf *, int, char **);
+struct fru_multirec_powersupply {
+#if WORDS_BIGENDIAN
+	uint16_t capacity;
+#else
+	uint16_t capacity:12;
+	uint16_t __reserved1:4;
+#endif
+	uint16_t peak_va;
+	uint8_t inrush_current;
+	uint8_t inrush_interval;
+	uint16_t lowend_input1;
+	uint16_t highend_input1;
+	uint16_t lowend_input2;
+	uint16_t highend_input2;
+	uint8_t lowend_freq;
+	uint8_t highend_freq;
+	uint8_t dropout_tolerance;
+#if WORDS_BIGENDIAN
+	uint8_t __reserved2:3;
+	uint8_t tach:1;
+	uint8_t hotswap:1;
+	uint8_t autoswitch:1;
+	uint8_t pfc:1;
+	uint8_t predictive_fail:1;
+#else
+	uint8_t predictive_fail:1;
+	uint8_t pfc:1;
+	uint8_t autoswitch:1;
+	uint8_t hotswap:1;
+	uint8_t tach:1;
+	uint8_t __reserved2:3;
+#endif
+	uint16_t peak_cap_ht;
+#if WORDS_BIGENDIAN
+	uint8_t combined_voltage1:4;
+	uint8_t combined_voltage2:4;
+#else
+	uint8_t combined_voltage2:4;
+	uint8_t combined_voltage1:4;
+#endif
+	uint16_t combined_capacity;
+	uint8_t rps_threshold;
+} __attribute__ ((packed));
 
-#endif /* IPMI_FRU_H */
+static const char *combined_voltage_desc[] __attribute__ ((unused)) = {
+"12 V", "-12 V", "5 V", "3.3 V"};
+
+struct fru_multirec_dcoutput {
+#if WORDS_BIGENDIAN
+	uint8_t standby:1;
+	uint8_t __reserved:3;
+	uint8_t output_number:4;
+#else
+	uint8_t output_number:4;
+	uint8_t __reserved:3;
+	uint8_t standby:1;
+#endif
+	short nominal_voltage;
+	short max_neg_dev;
+	short max_pos_dev;
+	uint16_t ripple_and_noise;
+	uint16_t min_current;
+	uint16_t max_current;
+} __attribute__ ((packed));
+
+struct fru_multirec_dcload {
+#if WORDS_BIGENDIAN
+	uint8_t __reserved:4;
+	uint8_t output_number:4;
+#else
+	uint8_t output_number:4;
+	uint8_t __reserved:4;
+#endif
+	short nominal_voltage;
+	short min_voltage;
+	short max_voltage;
+	uint16_t ripple_and_noise;
+	uint16_t min_current;
+	uint16_t max_current;
+} __attribute__ ((packed));
+
+struct fru_multirec_picmgext_header {
+	unsigned char mfg_id[3];
+#define FRU_PICMG_BACKPLANE_P2P			0x04
+#define FRU_PICMG_ADDRESS_TABLE			0x10
+#define FRU_PICMG_SHELF_POWER_DIST		0x11
+#define FRU_PICMG_SHELF_ACTIVATION		0x12
+#define FRU_PICMG_SHMC_IP_CONN			0x13
+#define FRU_PICMG_BOARD_P2P				0x14
+#define FRU_AMC_CURRENT					0x16
+#define FRU_AMC_ACTIVATION				0x17
+#define FRU_AMC_CARRIER_P2P				0x18
+#define FRU_AMC_P2P						0x19
+#define FRU_AMC_CARRIER_INFO			0x1a
+	unsigned char record_id;
+	unsigned char record_version;
+} __attribute__ ((packed));
+
+struct fru_picmgext_guid {
+	unsigned char guid[16];
+} __attribute__ ((packed));
+
+struct fru_picmgext_link_desc {
+#ifndef WORDS_BIGENDIAN
+	unsigned int designator:12;
+#define FRU_PICMGEXT_LINK_TYPE_BASE					0x01
+#define FRU_PICMGEXT_LINK_TYPE_FABRIC_ETHERNET		0x02
+#define FRU_PICMGEXT_LINK_TYPE_FABRIC_INFINIBAND	0x03
+#define FRU_PICMGEXT_LINK_TYPE_FABRIC_STAR			0x04
+#define FRU_PICMGEXT_LINK_TYPE_PCIE					0x05
+	unsigned int type:8;
+	unsigned int ext:4;
+	unsigned int grouping:8;
+#else
+	unsigned int grouping:8;
+	unsigned int ext:4;
+#define FRU_PICMGEXT_LINK_TYPE_BASE					0x01
+#define FRU_PICMGEXT_LINK_TYPE_FABRIC_ETHERNET		0x02
+#define FRU_PICMGEXT_LINK_TYPE_FABRIC_INFINIBAND	0x03
+#define FRU_PICMGEXT_LINK_TYPE_FABRIC_STAR			0x04
+#define FRU_PICMGEXT_LINK_TYPE_PCIE					0x05
+	unsigned int type:8;
+	unsigned int designator:12;
+#endif
+} __attribute__ ((packed));
+
+struct fru_picmgext_chn_desc {
+#ifndef WORDS_BIGENDIAN
+	unsigned char remote_slot:8;
+	unsigned char remote_chn:5;
+	unsigned char local_chn:5;
+	unsigned char:6;
+#else
+	unsigned char:6;
+	unsigned char local_chn:5;
+	unsigned char remote_chn:5;
+	unsigned char remote_slot:8;
+#endif
+} __attribute__ ((packed));
+
+struct fru_picmgext_slot_desc {
+	unsigned char chan_type;
+	unsigned char slot_addr;
+	unsigned char chn_count;
+} __attribute__ ((packed));
+
+#define FRU_PICMGEXT_DESIGN_IF_BASE				0x00
+#define FRU_PICMGEXT_DESIGN_IF_FABRIC			0x01
+#define FRU_PICMGEXT_DESIGN_IF_UPDATE_CHANNEL	0x02
+#define FRU_PICMGEXT_DESIGN_IF_RESERVED			0x03
+
+struct fru_picmgext_activation_record {
+	unsigned char ibmb_addr;
+	unsigned char max_module_curr;
+	unsigned char reserved;
+} __attribute__ ((packed));
+
+struct fru_picmgext_carrier_p2p_record {
+	unsigned char resource_id;
+	unsigned char p2p_count;
+} __attribute__ ((packed));
+
+struct fru_picmgext_carrier_p2p_descriptor {
+#ifndef WORDS_BIGENDIAN
+	unsigned char remote_resource_id;
+	unsigned short remote_port:5;
+	unsigned short local_port:5;
+	unsigned short reserved:6;
+#else
+	unsigned short reserved:6;
+	unsigned short local_port:5;
+	unsigned short remote_port:5;
+	unsigned char remote_resource_id;
+#endif
+} __attribute__ ((packed));
+
+static const char *chassis_type_desc[] __attribute__ ((unused)) = {
+"Unspecified", "Other", "Unknown",
+	    "Desktop", "Low Profile Desktop", "Pizza Box",
+	    "Mini Tower", "Tower",
+	    "Portable", "LapTop", "Notebook", "Hand Held",
+	    "Docking Station", "All in One", "Sub Notebook",
+	    "Space-saving", "Lunch Box", "Main Server Chassis",
+	    "Expansion Chassis", "SubChassis", "Bus Expansion Chassis",
+	    "Peripheral Chassis", "RAID Chassis", "Rack Mount Chassis"};
+
+int ipmi_fru_main(struct ipmi_intf *intf, int argc, char **argv);
+int ipmi_fru_print(struct ipmi_intf *intf, struct sdr_record_fru_locator *fru);
+
+#endif				/* IPMI_FRU_H */

ipmitool/include/ipmitool/ipmi_fwum.h

@@ -28,22 +28,15 @@
  * PUNITIVE DAMAGES, HOWEVER CAUSED AND REGARDLESS OF THE THEORY OF
  * LIABILITY, ARISING OUT OF THE USE OF OR INABILITY TO USE THIS SOFTWARE,
  * EVEN IF SUN HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
- * 
- * You acknowledge that this software is not designed or intended for use
- * in the design, construction, operation or maintenance of any nuclear
- * facility.
  */
 
-#ifndef IPMI_BMC_H
-#define IPMI_BMC_H
+#ifndef IPMI_KFWUM_H
+#define IPMI_KFWUM_H
 
+#include <inttypes.h>
 #include <ipmitool/ipmi.h>
 
-#define BMC_GET_DEVICE_ID		0x01
-#define BMC_COLD_RESET			0x02
-#define BMC_WARM_RESET			0x03
-#define BMC_GET_SELF_TEST		0x04
 
-int ipmi_bmc_main(struct ipmi_intf *, int, char **);
+int ipmi_fwum_main(struct ipmi_intf *, int, char **);
 
-#endif /*IPMI_BMC_H*/
+#endif /* IPMI_KFWUM_H */

ipmitool/include/ipmitool/ipmi_intf.h

@@ -28,19 +28,175 @@
  * PUNITIVE DAMAGES, HOWEVER CAUSED AND REGARDLESS OF THE THEORY OF
  * LIABILITY, ARISING OUT OF THE USE OF OR INABILITY TO USE THIS SOFTWARE,
  * EVEN IF SUN HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
- * 
- * You acknowledge that this software is not designed or intended for use
- * in the design, construction, operation or maintenance of any nuclear
- * facility.
  */
 
 #ifndef IPMI_INTF_H
 #define IPMI_INTF_H
 
 #include <ipmitool/ipmi.h>
+#include <ipmitool/ipmi_oem.h>
+#include <ipmitool/ipmi_constants.h>
+
+#include <sys/types.h>
+#include <arpa/inet.h>
+#include <sys/socket.h>
+#include <netinet/in.h>
+
+/*
+ * An enumeration that describes every possible session state for
+ * an IPMIv2 / RMCP+ session.
+ */
+enum LANPLUS_SESSION_STATE {
+	LANPLUS_STATE_PRESESSION = 0,
+	LANPLUS_STATE_OPEN_SESSION_SENT,
+	LANPLUS_STATE_OPEN_SESSION_RECEIEVED,
+	LANPLUS_STATE_RAKP_1_SENT,
+	LANPLUS_STATE_RAKP_2_RECEIVED,
+	LANPLUS_STATE_RAKP_3_SENT,
+	LANPLUS_STATE_ACTIVE,
+	LANPLUS_STATE_CLOSE_SENT,
+};
+
+
+#define IPMI_AUTHCODE_BUFFER_SIZE 20
+#define IPMI_SIK_BUFFER_SIZE      20
+#define IPMI_KG_BUFFER_SIZE       21 /* key plus null byte */
+
+struct ipmi_session {
+	uint8_t hostname[64];
+	uint8_t username[17];
+	uint8_t authcode[IPMI_AUTHCODE_BUFFER_SIZE + 1];
+	uint8_t challenge[16];
+	uint8_t authtype;
+	uint8_t authtype_set;
+#define IPMI_AUTHSTATUS_PER_MSG_DISABLED	0x10
+#define IPMI_AUTHSTATUS_PER_USER_DISABLED	0x08
+#define IPMI_AUTHSTATUS_NONNULL_USERS_ENABLED	0x04
+#define IPMI_AUTHSTATUS_NULL_USERS_ENABLED	0x02
+#define IPMI_AUTHSTATUS_ANONYMOUS_USERS_ENABLED	0x01
+	uint8_t authstatus;
+	uint8_t authextra;
+	uint8_t privlvl;
+	uint8_t cipher_suite_id;
+	char sol_escape_char;
+	int password;
+	int port;
+	int active;
+	int retry;
+
+	uint32_t session_id;
+	uint32_t in_seq;
+	uint32_t out_seq;
+	uint32_t timeout;
+
+	struct sockaddr_in addr;
+	socklen_t addrlen;
+
+	/*
+	 * This struct holds state data specific to IMPI v2 / RMCP+ sessions
+	 */
+	struct {
+		enum LANPLUS_SESSION_STATE session_state;
+
+		/* These are the algorithms agreed upon for the session */
+		uint8_t requested_auth_alg;
+		uint8_t requested_integrity_alg;
+		uint8_t requested_crypt_alg;
+		uint8_t auth_alg;
+		uint8_t integrity_alg;
+		uint8_t crypt_alg;
+		uint8_t max_priv_level;
+
+		uint32_t console_id;
+		uint32_t bmc_id;
+
+		/*
+		 * Values required for RAKP mesages
+		 */
+
+		/* Random number generated byt the console */
+		uint8_t console_rand[16]; 
+		/* Random number generated by the BMC */
+		uint8_t bmc_rand[16];
+
+		uint8_t bmc_guid[16];
+		uint8_t requested_role;   /* As sent in the RAKP 1 message */
+		uint8_t rakp2_return_code;
+
+		uint8_t sik[IPMI_SIK_BUFFER_SIZE]; /* Session integrity key */
+		uint8_t kg[IPMI_KG_BUFFER_SIZE];   /* BMC key */
+		uint8_t k1[20];   /* Used for Integrity checking? */
+		uint8_t k2[20];   /* First 16 bytes used for AES  */
+	} v2_data;
+
+
+	/*
+	 * This data is specific to the Serial Over Lan session
+	 */
+	struct {
+		uint16_t max_inbound_payload_size;
+		uint16_t max_outbound_payload_size;
+		uint16_t port;
+		uint8_t sequence_number;
+
+		/*  This data describes the last SOL packet */
+		uint8_t last_received_sequence_number;
+		uint8_t last_received_byte_count;
+		void (*sol_input_handler)(struct ipmi_rs * rsp);
+	} sol_data;
+};
+
+struct ipmi_cmd {
+	int (*func)(struct ipmi_intf * intf, int argc, char ** argv);
+	const char * name;
+	const char * desc;
+};
+
+struct ipmi_intf_support {
+	const char * name;
+	int supported;
+};
+
+struct ipmi_intf {
+	char name[16];
+	char desc[128];
+	int fd;
+	int opened;
+	int abort;
+	int noanswer;
+
+	struct ipmi_session * session;
+	struct ipmi_oem_handle * oem;
+	struct ipmi_cmd * cmdlist;
+	uint32_t my_addr;
+	uint32_t target_addr;
+	uint8_t target_lun;
+	uint8_t target_channel;
+
+	int (*setup)(struct ipmi_intf * intf);
+	int (*open)(struct ipmi_intf * intf);
+	void (*close)(struct ipmi_intf * intf);
+	struct ipmi_rs *(*sendrecv)(struct ipmi_intf * intf, struct ipmi_rq * req);
+	int (*sendrsp)(struct ipmi_intf * intf, struct ipmi_rs * rsp);
+	struct ipmi_rs *(*recv_sol)(struct ipmi_intf * intf);
+	struct ipmi_rs *(*send_sol)(struct ipmi_intf * intf, struct ipmi_v2_payload * payload);
+	int (*keepalive)(struct ipmi_intf * intf);
+};
 
-int ipmi_intf_init(void);
-void ipmi_intf_exit(void);
 struct ipmi_intf * ipmi_intf_load(char * name);
+void ipmi_intf_print(struct ipmi_intf_support * intflist);
+
+void ipmi_intf_session_set_hostname(struct ipmi_intf * intf, char * hostname);
+void ipmi_intf_session_set_username(struct ipmi_intf * intf, char * username);
+void ipmi_intf_session_set_password(struct ipmi_intf * intf, char * password);
+void ipmi_intf_session_set_privlvl(struct ipmi_intf * intf, uint8_t privlvl);
+void ipmi_intf_session_set_cipher_suite_id(struct ipmi_intf * intf, uint8_t cipher_suite_id);
+void ipmi_intf_session_set_sol_escape_char(struct ipmi_intf * intf, char sol_escape_char);
+void ipmi_intf_session_set_kgkey(struct ipmi_intf * intf, char * kgkey);
+void ipmi_intf_session_set_port(struct ipmi_intf * intf, int port);
+void ipmi_intf_session_set_authtype(struct ipmi_intf * intf, uint8_t authtype);
+void ipmi_intf_session_set_timeout(struct ipmi_intf * intf, uint32_t timeout);
+void ipmi_intf_session_set_retry(struct ipmi_intf * intf, int retry);
+void ipmi_cleanup(struct ipmi_intf * intf);
 
 #endif /* IPMI_INTF_H */

ipmitool/include/ipmitool/ipmi_isol.h

@@ -0,0 +1,56 @@
+/*
+ * Copyright (c) 2003 Sun Microsystems, Inc.  All Rights Reserved.
+ * 
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 
+ * Redistribution of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 
+ * Redistribution in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * 
+ * Neither the name of Sun Microsystems, Inc. or the names of
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ * 
+ * This software is provided "AS IS," without a warranty of any kind.
+ * ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND WARRANTIES,
+ * INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A
+ * PARTICULAR PURPOSE OR NON-INFRINGEMENT, ARE HEREBY EXCLUDED.
+ * SUN MICROSYSTEMS, INC. ("SUN") AND ITS LICENSORS SHALL NOT BE LIABLE
+ * FOR ANY DAMAGES SUFFERED BY LICENSEE AS A RESULT OF USING, MODIFYING
+ * OR DISTRIBUTING THIS SOFTWARE OR ITS DERIVATIVES.  IN NO EVENT WILL
+ * SUN OR ITS LICENSORS BE LIABLE FOR ANY LOST REVENUE, PROFIT OR DATA,
+ * OR FOR DIRECT, INDIRECT, SPECIAL, CONSEQUENTIAL, INCIDENTAL OR
+ * PUNITIVE DAMAGES, HOWEVER CAUSED AND REGARDLESS OF THE THEORY OF
+ * LIABILITY, ARISING OUT OF THE USE OF OR INABILITY TO USE THIS SOFTWARE,
+ * EVEN IF SUN HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
+ */
+
+#ifndef IPMI_ISOL_H
+#define IPMI_ISOL_H
+
+#include <ipmitool/ipmi.h>
+
+#define ACTIVATE_ISOL			0x01
+#define SET_ISOL_CONFIG			0x03
+#define GET_ISOL_CONFIG			0x04
+
+#define ISOL_ENABLE_PARAM		0x01
+#define ISOL_AUTHENTICATION_PARAM	0x02
+#define ISOL_ENABLE_FLAG			0x01
+#define ISOL_PRIVILEGE_LEVEL_USER	0x02
+#define ISOL_BAUD_RATE_PARAM		0x05
+#define ISOL_BAUD_RATE_9600		0x06
+#define ISOL_BAUD_RATE_19200		0x07
+#define ISOL_BAUD_RATE_38400		0x08
+#define ISOL_BAUD_RATE_57600		0x09
+#define ISOL_BAUD_RATE_115200		0x0A
+#define ISOL_PREFERRED_BAUD_RATE		0x07
+
+int ipmi_isol_main(struct ipmi_intf *, int, char **);
+
+#endif /* IPMI_SOL_H */

ipmitool/include/ipmitool/ipmi_lanp.h

@@ -28,10 +28,6 @@
  * PUNITIVE DAMAGES, HOWEVER CAUSED AND REGARDLESS OF THE THEORY OF
  * LIABILITY, ARISING OUT OF THE USE OF OR INABILITY TO USE THIS SOFTWARE,
  * EVEN IF SUN HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
- * 
- * You acknowledge that this software is not designed or intended for use
- * in the design, construction, operation or maintenance of any nuclear
- * facility.
  */
 
 #ifndef IPMI_LANP_H
@@ -46,21 +42,13 @@
 # define IPMI_LAN_SUSPEND_ARP_GRAT (1)
 #define IPMI_LAN_GET_STAT	0x04
 
-#define IPMI_SESSION_AUTHTYPE_NONE	0x0
-#define IPMI_SESSION_AUTHTYPE_MD2	0x1
-#define IPMI_SESSION_AUTHTYPE_MD5	0x2
-#define IPMI_SESSION_AUTHTYPE_KEY	0x4
-#define IPMI_SESSION_AUTHTYPE_OEM	0x5
+#define IPMI_CHANNEL_NUMBER_MAX	0xe
 
-#define IPMI_SESSION_PRIV_CALLBACK	0x1
-#define IPMI_SESSION_PRIV_USER		0x2
-#define IPMI_SESSION_PRIV_OPERATOR	0x3
-#define IPMI_SESSION_PRIV_ADMIN		0x4
-#define IPMI_SESSION_PRIV_OEM		0x5
-
-extern const struct valstr ipmi_privlvl_vals[];
-extern const struct valstr ipmi_authtype_vals[];
-extern struct ipmi_session lan_session;
+#define IPMI_LANP_TIMEOUT		3
+#define IPMI_LANP_RETRIES		10
+#define IPMI_LANP_WRITE_UNLOCK		0
+#define IPMI_LANP_WRITE_LOCK		1
+#define IPMI_LANP_WRITE_COMMIT		2
 
 enum {
 	IPMI_LANP_SET_IN_PROGRESS,
@@ -68,21 +56,26 @@ enum {
 	IPMI_LANP_AUTH_TYPE_ENABLE,
 	IPMI_LANP_IP_ADDR,
 	IPMI_LANP_IP_ADDR_SRC,
-	IPMI_LANP_MAC_ADDR,
+	IPMI_LANP_MAC_ADDR,            /* 5 */
 	IPMI_LANP_SUBNET_MASK,
 	IPMI_LANP_IP_HEADER,
 	IPMI_LANP_PRI_RMCP_PORT,
 	IPMI_LANP_SEC_RMCP_PORT,
-	IPMI_LANP_BMC_ARP,
+	IPMI_LANP_BMC_ARP,             /* 10 */
 	IPMI_LANP_GRAT_ARP,
 	IPMI_LANP_DEF_GATEWAY_IP,
 	IPMI_LANP_DEF_GATEWAY_MAC,
 	IPMI_LANP_BAK_GATEWAY_IP,
-	IPMI_LANP_BAK_GATEWAY_MAC,
+	IPMI_LANP_BAK_GATEWAY_MAC,     /* 15 */
 	IPMI_LANP_SNMP_STRING,
 	IPMI_LANP_NUM_DEST,
 	IPMI_LANP_DEST_TYPE,
 	IPMI_LANP_DEST_ADDR,
+	IPMI_LANP_VLAN_ID,             /* 20 */
+	IPMI_LANP_VLAN_PRIORITY,
+	IPMI_LANP_RMCP_CIPHER_SUPPORT,
+	IPMI_LANP_RMCP_CIPHERS,
+	IPMI_LANP_RMCP_PRIV_LEVELS,
 	IPMI_LANP_OEM_ALERT_STRING=96,
 	IPMI_LANP_ALERT_RETRY=97,
 	IPMI_LANP_UTC_OFFSET=98,
@@ -96,39 +89,44 @@ static struct lan_param {
 	int cmd;
 	int size;
 	char desc[24];
-	unsigned char * data;
+	uint8_t * data;
+	int data_len;
 } ipmi_lan_params[] __attribute__((unused)) = {
 	{ IPMI_LANP_SET_IN_PROGRESS,	1,	"Set in Progress"	},
-	{ IPMI_LANP_AUTH_TYPE,		1,	"Auth Type"		},
+	{ IPMI_LANP_AUTH_TYPE,		1,	"Auth Type Support"	},
 	{ IPMI_LANP_AUTH_TYPE_ENABLE,	5,	"Auth Type Enable"	},
 	{ IPMI_LANP_IP_ADDR,		4,	"IP Address"		},
 	{ IPMI_LANP_IP_ADDR_SRC,	1,	"IP Address Source"	},
-	{ IPMI_LANP_MAC_ADDR,		6,	"MAC Address"		},
+	{ IPMI_LANP_MAC_ADDR,		6,	"MAC Address"		}, /* 5 */
 	{ IPMI_LANP_SUBNET_MASK,	4,	"Subnet Mask"		},
 	{ IPMI_LANP_IP_HEADER,		3,	"IP Header"		},
 	{ IPMI_LANP_PRI_RMCP_PORT,	2,	"Primary RMCP Port"	},
 	{ IPMI_LANP_SEC_RMCP_PORT,	2,	"Secondary RMCP Port"	},
-	{ IPMI_LANP_BMC_ARP,		1,	"BMC ARP Control"	},
+	{ IPMI_LANP_BMC_ARP,		1,	"BMC ARP Control"	}, /* 10 */
 	{ IPMI_LANP_GRAT_ARP,		1,	"Gratituous ARP Intrvl"	},
 	{ IPMI_LANP_DEF_GATEWAY_IP,	4,	"Default Gateway IP"	},
 	{ IPMI_LANP_DEF_GATEWAY_MAC,	6,	"Default Gateway MAC"	},
 	{ IPMI_LANP_BAK_GATEWAY_IP,	4,	"Backup Gateway IP"	},
-	{ IPMI_LANP_BAK_GATEWAY_MAC,	6,	"Backup Gateway MAC"	},
-	{ IPMI_LANP_SNMP_STRING,	18,	"Community String"	},
+	{ IPMI_LANP_BAK_GATEWAY_MAC,	6,	"Backup Gateway MAC"	}, /* 15 */
+	{ IPMI_LANP_SNMP_STRING,	18,	"SNMP Community String"	},
 	{ IPMI_LANP_NUM_DEST,		1,	"Number of Destinations"},
 	{ IPMI_LANP_DEST_TYPE,		4,	"Destination Type"	},
 	{ IPMI_LANP_DEST_ADDR,		13,	"Destination Addresses"	},
-	{ IPMI_LANP_OEM_ALERT_STRING,	28,	"OEM Alert String"	},
+	{ IPMI_LANP_VLAN_ID,		2,	"802.1q VLAN ID"        }, /* 20 */
+	{ IPMI_LANP_VLAN_PRIORITY,	1,	"802.1q VLAN Priority"  },
+	{ IPMI_LANP_RMCP_CIPHER_SUPPORT,1,	"RMCP+ Cipher Suite Count" },
+	{ IPMI_LANP_RMCP_CIPHERS,	16,	"RMCP+ Cipher Suites"   },
+	{ IPMI_LANP_RMCP_PRIV_LEVELS,	9,	"Cipher Suite Priv Max"	},
+	{ IPMI_LANP_OEM_ALERT_STRING,	28,	"OEM Alert String"	}, /* 25 */
 	{ IPMI_LANP_ALERT_RETRY,	1,	"Alert Retry Algorithm" },
 	{ IPMI_LANP_UTC_OFFSET,		3,	"UTC Offset"		},
 	{ IPMI_LANP_DHCP_SERVER_IP,	4,	"DHCP Server IP"	},
-	{ IPMI_LANP_DHCP_SERVER_MAC,	6,	"DHDP Server MAC"	},
-	{ IPMI_LANP_DHCP_ENABLE,	1,	"DHCP Enable"		},
+	{ IPMI_LANP_DHCP_SERVER_MAC,	6,	"DHDP Server MAC"	}, 
+	{ IPMI_LANP_DHCP_ENABLE,	1,	"DHCP Enable"		}, /* 30 */
 	{ IPMI_LANP_CHAN_ACCESS_MODE,	2,	"Channel Access Mode"	},
 	{ -1 }
 };
 
-void ipmi_get_channel_info(struct ipmi_intf * intf, unsigned char channel);
 int  ipmi_lanp_main(struct ipmi_intf *, int, char **);
 
 #endif /*IPMI_LANP_H*/

ipmitool/include/ipmitool/ipmi_main.h

@@ -0,0 +1,42 @@
+/*
+ * Copyright (c) 2003 Sun Microsystems, Inc.  All Rights Reserved.
+ * 
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 
+ * Redistribution of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 
+ * Redistribution in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * 
+ * Neither the name of Sun Microsystems, Inc. or the names of
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ * 
+ * This software is provided "AS IS," without a warranty of any kind.
+ * ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND WARRANTIES,
+ * INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A
+ * PARTICULAR PURPOSE OR NON-INFRINGEMENT, ARE HEREBY EXCLUDED.
+ * SUN MICROSYSTEMS, INC. ("SUN") AND ITS LICENSORS SHALL NOT BE LIABLE
+ * FOR ANY DAMAGES SUFFERED BY LICENSEE AS A RESULT OF USING, MODIFYING
+ * OR DISTRIBUTING THIS SOFTWARE OR ITS DERIVATIVES.  IN NO EVENT WILL
+ * SUN OR ITS LICENSORS BE LIABLE FOR ANY LOST REVENUE, PROFIT OR DATA,
+ * OR FOR DIRECT, INDIRECT, SPECIAL, CONSEQUENTIAL, INCIDENTAL OR
+ * PUNITIVE DAMAGES, HOWEVER CAUSED AND REGARDLESS OF THE THEORY OF
+ * LIABILITY, ARISING OUT OF THE USE OF OR INABILITY TO USE THIS SOFTWARE,
+ * EVEN IF SUN HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
+ */
+
+#ifndef IPMI_MAIN_H
+#define IPMI_MAIN_H
+
+#include <ipmitool/ipmi_intf.h>
+
+int ipmi_main(int argc, char ** argv, struct ipmi_cmd * cmdlist, struct ipmi_intf_support * intflist);
+void ipmi_cmd_print(struct ipmi_cmd * cmdlist);
+int ipmi_cmd_run(struct ipmi_intf * intf, char * name, int argc, char ** argv);
+
+#endif /* IPMI_MAIN_H */

ipmitool/include/ipmitool/ipmi_mc.h

@@ -0,0 +1,103 @@
+/*
+ * Copyright (c) 2003 Sun Microsystems, Inc.  All Rights Reserved.
+ * 
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 
+ * Redistribution of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 
+ * Redistribution in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * 
+ * Neither the name of Sun Microsystems, Inc. or the names of
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ * 
+ * This software is provided "AS IS," without a warranty of any kind.
+ * ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND WARRANTIES,
+ * INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A
+ * PARTICULAR PURPOSE OR NON-INFRINGEMENT, ARE HEREBY EXCLUDED.
+ * SUN MICROSYSTEMS, INC. ("SUN") AND ITS LICENSORS SHALL NOT BE LIABLE
+ * FOR ANY DAMAGES SUFFERED BY LICENSEE AS A RESULT OF USING, MODIFYING
+ * OR DISTRIBUTING THIS SOFTWARE OR ITS DERIVATIVES.  IN NO EVENT WILL
+ * SUN OR ITS LICENSORS BE LIABLE FOR ANY LOST REVENUE, PROFIT OR DATA,
+ * OR FOR DIRECT, INDIRECT, SPECIAL, CONSEQUENTIAL, INCIDENTAL OR
+ * PUNITIVE DAMAGES, HOWEVER CAUSED AND REGARDLESS OF THE THEORY OF
+ * LIABILITY, ARISING OUT OF THE USE OF OR INABILITY TO USE THIS SOFTWARE,
+ * EVEN IF SUN HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
+ */
+
+#ifndef IPMI_MC_H
+#define IPMI_MC_H
+
+#include <ipmitool/ipmi.h>
+
+#define BMC_GET_DEVICE_ID	0x01
+#define BMC_COLD_RESET		0x02
+#define BMC_WARM_RESET		0x03
+#define BMC_GET_SELF_TEST	0x04
+#define BMC_SET_GLOBAL_ENABLES	0x2e
+#define BMC_GET_GLOBAL_ENABLES	0x2f
+#define BMC_GET_GUID		0x37
+
+int ipmi_mc_main(struct ipmi_intf *, int, char **);
+
+/* 
+ * Response data from IPM Get Device ID Command (IPMI rev 1.5, section 17.1)
+ * The following really apply to any IPM device, not just BMCs... 
+ */
+struct ipm_devid_rsp {
+	uint8_t device_id;
+	uint8_t device_revision;
+	uint8_t fw_rev1;
+	uint8_t fw_rev2;
+	uint8_t ipmi_version;
+	uint8_t adtl_device_support;
+	uint8_t manufacturer_id[3];
+	uint8_t product_id[2];
+	uint8_t aux_fw_rev[4];
+} __attribute__ ((packed));
+
+#define IPM_DEV_DEVICE_ID_SDR_MASK     (0x80)	/* 1 = provides SDRs      */
+#define IPM_DEV_DEVICE_ID_REV_MASK     (0x07)	/* BCD-enoded             */
+
+#define IPM_DEV_FWREV1_AVAIL_MASK      (0x80)	/* 0 = normal operation   */
+#define IPM_DEV_FWREV1_MAJOR_MASK      (0x3f)	/* Major rev, BCD-encoded */
+
+#define IPM_DEV_IPMI_VER_MAJOR_MASK    (0x0F)	/* Major rev, BCD-encoded */
+#define IPM_DEV_IPMI_VER_MINOR_MASK    (0xF0)	/* Minor rev, BCD-encoded */
+#define IPM_DEV_IPMI_VER_MINOR_SHIFT   (4)	/* Minor rev shift        */
+#define IPM_DEV_IPMI_VERSION_MAJOR(x) \
+	(x & IPM_DEV_IPMI_VER_MAJOR_MASK)
+#define IPM_DEV_IPMI_VERSION_MINOR(x) \
+	((x & IPM_DEV_IPMI_VER_MINOR_MASK) >> IPM_DEV_IPMI_VER_MINOR_SHIFT)
+
+#define IPM_DEV_MANUFACTURER_ID(x) \
+	((uint32_t) ((x[2] & 0x0F) << 16 | x[1] << 8 | x[0]))
+
+#define IPM_DEV_ADTL_SUPPORT_BITS      (8)
+
+struct ipm_selftest_rsp {
+	unsigned char code;
+	unsigned char test;
+} __attribute__ ((packed));
+
+#define IPM_SFT_CODE_OK			0x55
+#define IPM_SFT_CODE_NOT_IMPLEMENTED	0x56
+#define IPM_SFT_CODE_DEV_CORRUPTED	0x57
+#define IPM_SFT_CODE_FATAL_ERROR	0x58
+#define IPM_SFT_CODE_RESERVED		0xff
+
+#define IPM_SELFTEST_SEL_ERROR		0x80
+#define IPM_SELFTEST_SDR_ERROR		0x40
+#define IPM_SELFTEST_FRU_ERROR		0x20
+#define IPM_SELFTEST_IPMB_ERROR		0x10
+#define IPM_SELFTEST_SDRR_EMPTY		0x08
+#define IPM_SELFTEST_INTERNAL_USE	0x04
+#define IPM_SELFTEST_FW_BOOTBLOCK	0x02
+#define IPM_SELFTEST_FW_CORRUPTED	0x01
+
+#endif				/*IPMI_MC_H */

ipmitool/include/ipmitool/ipmi_oem.h

@@ -0,0 +1,47 @@
+/*
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 
+ * Redistribution of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 
+ * Redistribution in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * 
+ * Neither the name of Sun Microsystems, Inc. or the names of
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ * 
+ * This software is provided "AS IS," without a warranty of any kind.
+ * ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND WARRANTIES,
+ * INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A
+ * PARTICULAR PURPOSE OR NON-INFRINGEMENT, ARE HEREBY EXCLUDED.
+ * SUN MICROSYSTEMS, INC. ("SUN") AND ITS LICENSORS SHALL NOT BE LIABLE
+ * FOR ANY DAMAGES SUFFERED BY LICENSEE AS A RESULT OF USING, MODIFYING
+ * OR DISTRIBUTING THIS SOFTWARE OR ITS DERIVATIVES.  IN NO EVENT WILL
+ * SUN OR ITS LICENSORS BE LIABLE FOR ANY LOST REVENUE, PROFIT OR DATA,
+ * OR FOR DIRECT, INDIRECT, SPECIAL, CONSEQUENTIAL, INCIDENTAL OR
+ * PUNITIVE DAMAGES, HOWEVER CAUSED AND REGARDLESS OF THE THEORY OF
+ * LIABILITY, ARISING OUT OF THE USE OF OR INABILITY TO USE THIS SOFTWARE,
+ * EVEN IF SUN HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
+ */
+
+#ifndef IPMI_OEM_H
+#define IPMI_OEM_H
+
+#include <ipmitool/ipmi.h>
+
+/* oem handler, see lib/ipmi_oem.c */
+struct ipmi_oem_handle {
+	const char * name;
+	const char * desc;
+	int (*setup)(struct ipmi_intf * intf);
+};
+
+void ipmi_oem_print(void);
+int ipmi_oem_setup(struct ipmi_intf * intf, char * oemtype);
+int ipmi_oem_active(struct ipmi_intf * intf, const char * oemtype);
+
+#endif /*IPMI_OEM_H*/

ipmitool/include/ipmitool/ipmi_pef.h

@@ -0,0 +1,784 @@
+/*
+ * Copyright (c) 2004 Dell Computers.  All Rights Reserved.
+ * 
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 
+ * Redistribution of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 
+ * Redistribution in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * 
+ * Neither the name of Dell Computers, or the names of
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ * 
+ * This software is provided "AS IS," without a warranty of any kind.
+ * ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND WARRANTIES,
+ * INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A
+ * PARTICULAR PURPOSE OR NON-INFRINGEMENT, ARE HEREBY EXCLUDED.
+ * DELL COMPUTERS ("DELL") AND ITS LICENSORS SHALL NOT BE LIABLE
+ * FOR ANY DAMAGES SUFFERED BY LICENSEE AS A RESULT OF USING, MODIFYING
+ * OR DISTRIBUTING THIS SOFTWARE OR ITS DERIVATIVES.  IN NO EVENT WILL
+ * DELL OR ITS LICENSORS BE LIABLE FOR ANY LOST REVENUE, PROFIT OR DATA,
+ * OR FOR DIRECT, INDIRECT, SPECIAL, CONSEQUENTIAL, INCIDENTAL OR
+ * PUNITIVE DAMAGES, HOWEVER CAUSED AND REGARDLESS OF THE THEORY OF
+ * LIABILITY, ARISING OUT OF THE USE OF OR INABILITY TO USE THIS SOFTWARE,
+ * EVEN IF DELL HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
+ */
+
+#ifndef IPMI_PEF_H
+#define IPMI_PEF_H
+
+#include <ipmitool/ipmi.h>
+
+/* PEF */
+
+struct pef_capabilities {		/* "get pef capabilities" response */
+	uint8_t version;
+	uint8_t actions;						/* mapped by PEF_ACTION_xxx */
+	uint8_t tblsize;
+};
+
+typedef enum {
+	P_TRUE,
+	P_SUPP,
+	P_ACTV,
+	P_ABLE,
+} flg_e;
+
+struct pef_table_entry {
+#define PEF_CONFIG_ENABLED 0x80
+#define PEF_CONFIG_PRECONFIGURED 0x40
+	uint8_t config;
+#define PEF_ACTION_DIAGNOSTIC_INTERRUPT 0x20
+#define PEF_ACTION_OEM 0x10
+#define PEF_ACTION_POWER_CYCLE 0x08
+#define PEF_ACTION_RESET 0x04
+#define PEF_ACTION_POWER_DOWN 0x02
+#define PEF_ACTION_ALERT 0x01
+	uint8_t action;
+#define PEF_POLICY_NUMBER_MASK 0x0f
+	uint8_t policy_number;
+#define PEF_SEVERITY_NON_RECOVERABLE 0x20
+#define PEF_SEVERITY_CRITICAL 0x10
+#define PEF_SEVERITY_WARNING 0x08
+#define PEF_SEVERITY_OK 0x04
+#define PEF_SEVERITY_INFORMATION 0x02
+#define PEF_SEVERITY_MONITOR 0x01
+	uint8_t severity;
+	uint8_t generator_ID_addr;
+	uint8_t generator_ID_lun;
+	uint8_t sensor_type;
+#define PEF_SENSOR_NUMBER_MATCH_ANY 0xff
+	uint8_t sensor_number;
+#define PEF_EVENT_TRIGGER_UNSPECIFIED 0x0
+#define PEF_EVENT_TRIGGER_THRESHOLD 0x1
+#define PEF_EVENT_TRIGGER_SENSOR_SPECIFIC 0x6f
+#define PEF_EVENT_TRIGGER_MATCH_ANY 0xff
+	uint8_t event_trigger;
+	uint8_t event_data_1_offset_mask[2];
+	uint8_t event_data_1_AND_mask;
+	uint8_t event_data_1_compare_1;
+	uint8_t event_data_1_compare_2;
+	uint8_t event_data_2_AND_mask;
+	uint8_t event_data_2_compare_1;
+	uint8_t event_data_2_compare_2;
+	uint8_t event_data_3_AND_mask;
+	uint8_t event_data_3_compare_1;
+	uint8_t event_data_3_compare_2;
+} __attribute__ ((packed));
+
+struct desc_map {						/* maps a description to a value/mask */
+	const char *desc;
+	uint32_t mask;
+};
+
+struct bit_desc_map {				/* description text container */
+#define BIT_DESC_MAP_LIST 0x1		/* index-based text array */
+#define BIT_DESC_MAP_ANY 0x2		/* bitwise, but only print 1st one */
+#define BIT_DESC_MAP_ALL 0x3		/* bitwise, print them all */
+	uint32_t desc_map_type;
+	struct desc_map desc_maps[128];
+};
+
+static struct bit_desc_map
+pef_b2s_actions __attribute__((unused)) = {
+BIT_DESC_MAP_ALL,
+{	{"Alert",						PEF_ACTION_ALERT},
+	{"Power-off",					PEF_ACTION_POWER_DOWN},
+	{"Reset",						PEF_ACTION_RESET},
+	{"Power-cycle",				PEF_ACTION_POWER_CYCLE},
+	{"OEM-defined",				PEF_ACTION_OEM},
+	{"Diagnostic-interrupt",	PEF_ACTION_DIAGNOSTIC_INTERRUPT},
+	{NULL}
+}	};
+
+static struct bit_desc_map
+pef_b2s_severities __attribute__((unused)) = {
+BIT_DESC_MAP_ANY,
+{	{"Non-recoverable",			PEF_SEVERITY_NON_RECOVERABLE},
+	{"Critical",					PEF_SEVERITY_CRITICAL},
+	{"Warning",						PEF_SEVERITY_WARNING},
+	{"OK",							PEF_SEVERITY_OK},
+	{"Information",				PEF_SEVERITY_INFORMATION},
+	{"Monitor",						PEF_SEVERITY_MONITOR},
+	{NULL}
+}	};
+
+static struct bit_desc_map
+pef_b2s_sensortypes __attribute__((unused)) = {
+BIT_DESC_MAP_LIST,
+{	{"Any",								255},
+	{"Temperature",					1},
+	{"Voltage",							2},
+	{"Current",							3},
+	{"Fan",								4},
+	{"Chassis Intrusion",			5},
+	{"Platform security breach",	6},
+	{"Processor",						7},
+	{"Power supply",					8},
+	{"Power Unit",						9},
+	{"Cooling device",				10},
+	{"Other (units-based)",			11},
+	{"Memory",							12},
+	{"Drive Slot",						13},
+	{"POST memory resize",			14},
+	{"POST error",						15},
+	{"Logging disabled",				16},
+	{"Watchdog 1",						17},
+	{"System event",					18},
+	{"Critical Interrupt",			19},
+	{"Button",							20},
+	{"Module/board",					21},
+	{"uController/coprocessor",	22},
+	{"Add-in card",					23},
+	{"Chassis",							24},
+	{"Chipset",							25},
+	{"Other (FRU)",					26},
+	{"Cable/interconnect",			27},
+	{"Terminator",						28},
+	{"System boot",					29},
+	{"Boot error",						30},
+	{"OS boot",							31},
+	{"OS critical stop",				32},
+	{"Slot/connector",				33},
+	{"ACPI power state",				34},
+	{"Watchdog 2",						35},
+	{"Platform alert",				36},
+	{"Entity presence",				37},
+	{"Monitor ASIC/IC",				38},
+	{"LAN",								39},
+	{"Management subsytem health",40},
+	{"Battery",							41},
+	{NULL}
+}	};
+
+static struct bit_desc_map
+pef_b2s_gentype_1 = {
+BIT_DESC_MAP_LIST,
+{	{"<LNC",								0},		/* '<' : getting worse */
+	{">LNC",								1},		/* '>' : getting better */
+	{"<LC",								2},
+	{">LC",								3},
+	{"<LNR",								4},
+	{">LNR",								5},
+	{">UNC",								6},
+	{"<UNC",								7},
+	{">UC",								8},
+	{"<UC",								9},
+	{">UNR",								10},
+	{"<UNR",								11},
+	{NULL}
+}	};
+
+static struct bit_desc_map
+pef_b2s_gentype_2 = {
+BIT_DESC_MAP_LIST,
+{	{"transition to idle",			0},
+	{"transition to active",		1},
+	{"transition to busy",			2},
+	{NULL}
+}	};
+
+static struct bit_desc_map
+pef_b2s_gentype_3 = {
+BIT_DESC_MAP_LIST,
+{	{"state deasserted",				0},
+	{"state asserted",				1},
+	{NULL}
+}	};
+
+static struct bit_desc_map
+pef_b2s_gentype_4 = {
+BIT_DESC_MAP_LIST,
+{	{"predictive failure deasserted",	0},
+	{"predictive failure asserted",		1},
+	{NULL}
+}	};
+
+static struct bit_desc_map
+pef_b2s_gentype_5 = {
+BIT_DESC_MAP_LIST,
+{	{"limit not exceeded",			0},
+	{"limit exceeded",				1},
+	{NULL}
+}	};
+
+static struct bit_desc_map
+pef_b2s_gentype_6 = {
+BIT_DESC_MAP_LIST,
+{	{"performance met",				0},
+	{"performance lags",				1},
+	{NULL}
+}	};
+
+static struct bit_desc_map
+pef_b2s_gentype_7 = {
+BIT_DESC_MAP_LIST,
+{	{"ok",								0},
+	{"<warn",							1},		/* '<' : getting worse */
+	{"<fail",							2},
+	{"<dead",							3},
+	{">warn",							4},		/* '>' : getting better */
+	{">fail",							5},
+	{"dead",								6},
+	{"monitor",							7},
+	{"informational",					8},
+	{NULL}
+}	};
+
+static struct bit_desc_map
+pef_b2s_gentype_8 = {
+BIT_DESC_MAP_LIST,
+{	{"device removed/absent",		0},
+	{"device inserted/present",	1},
+	{NULL}
+}	};
+
+static struct bit_desc_map
+pef_b2s_gentype_9 = {
+BIT_DESC_MAP_LIST,
+{	{"device disabled",				0},
+	{"device enabled",				1},
+	{NULL}
+}	};
+
+static struct bit_desc_map
+pef_b2s_gentype_10 = {
+BIT_DESC_MAP_LIST,
+{	{"transition to running",		0},
+	{"transition to in test",		1},
+	{"transition to power off",	2},
+	{"transition to online",		3},
+	{"transition to offline",		4},
+	{"transition to off duty",		5},
+	{"transition to degraded",		6},
+	{"transition to power save",	7},
+	{"install error",					8},
+	{NULL}
+}	};
+
+static struct bit_desc_map
+pef_b2s_gentype_11 = {
+BIT_DESC_MAP_LIST,
+{	{"fully redundant",					0},
+	{"redundancy lost",					1},
+	{"redundancy degraded",				2},
+	{"<non-redundant/sufficient",		3},		/* '<' : getting worse */
+	{">non-redundant/sufficient",		4},		/* '>' : getting better */
+	{"non-redundant/insufficient",	5},
+	{"<redundancy degraded",			6},
+	{">redundancy degraded",			7},
+	{NULL}
+}	};
+
+static struct bit_desc_map
+pef_b2s_gentype_12 = {
+BIT_DESC_MAP_LIST,
+{	{"D0 power state",				0},
+	{"D1 power state",				1},
+	{"D2 power state",				2},
+	{"D3 power state",				3},
+	{NULL}
+}	};
+
+static struct bit_desc_map *
+pef_b2s_generic_ER[] __attribute__((unused)) = {
+	&pef_b2s_gentype_1,
+	&pef_b2s_gentype_2,
+	&pef_b2s_gentype_3,
+	&pef_b2s_gentype_4,
+	&pef_b2s_gentype_5,
+	&pef_b2s_gentype_6,
+	&pef_b2s_gentype_7,
+	&pef_b2s_gentype_8,
+	&pef_b2s_gentype_9,
+	&pef_b2s_gentype_10,
+	&pef_b2s_gentype_11,
+	&pef_b2s_gentype_12,
+};
+#define PEF_B2S_GENERIC_ER_ENTRIES \
+			(sizeof(pef_b2s_generic_ER) / sizeof(pef_b2s_generic_ER[0]))
+
+struct pef_policy_entry {
+#define PEF_POLICY_ID_MASK 0xf0
+#define PEF_POLICY_ID_SHIFT 4
+#define PEF_POLICY_ENABLED 0x08
+#define PEF_POLICY_FLAGS_MASK 0x07
+#define PEF_POLICY_FLAGS_MATCH_ALWAYS 0
+#define PEF_POLICY_FLAGS_PREV_OK_SKIP 1
+#define PEF_POLICY_FLAGS_PREV_OK_NEXT_POLICY_SET 2
+#define PEF_POLICY_FLAGS_PREV_OK_NEXT_CHANNEL_IN_SET 3
+#define PEF_POLICY_FLAGS_PREV_OK_NEXT_DESTINATION_IN_SET 4
+	uint8_t policy;
+#define PEF_POLICY_CHANNEL_MASK 0xf0
+#define PEF_POLICY_CHANNEL_SHIFT 4
+#define PEF_POLICY_DESTINATION_MASK 0x0f
+	uint8_t chan_dest;
+#define PEF_POLICY_EVENT_SPECIFIC 0x80
+	uint8_t alert_string_key;
+} __attribute__ ((packed));
+
+static struct bit_desc_map
+pef_b2s_policies __attribute__((unused)) = {
+BIT_DESC_MAP_LIST,
+{	{"Match-always",				PEF_POLICY_FLAGS_MATCH_ALWAYS},
+	{"Try-next-entry",			PEF_POLICY_FLAGS_PREV_OK_SKIP},
+	{"Try-next-set",				PEF_POLICY_FLAGS_PREV_OK_NEXT_POLICY_SET},
+	{"Try-next-channel",			PEF_POLICY_FLAGS_PREV_OK_NEXT_CHANNEL_IN_SET},
+	{"Try-next-destination",	PEF_POLICY_FLAGS_PREV_OK_NEXT_DESTINATION_IN_SET},
+	{NULL}
+}	};
+
+static struct bit_desc_map
+pef_b2s_ch_medium __attribute__((unused)) = {
+#define PEF_CH_MEDIUM_TYPE_IPMB			1
+#define PEF_CH_MEDIUM_TYPE_ICMB_10		2
+#define PEF_CH_MEDIUM_TYPE_ICMB_09		3
+#define PEF_CH_MEDIUM_TYPE_LAN			4
+#define PEF_CH_MEDIUM_TYPE_SERIAL		5
+#define PEF_CH_MEDIUM_TYPE_XLAN			6
+#define PEF_CH_MEDIUM_TYPE_PCI_SMBUS	7
+#define PEF_CH_MEDIUM_TYPE_SMBUS_V1X	8
+#define PEF_CH_MEDIUM_TYPE_SMBUS_V2X	9
+#define PEF_CH_MEDIUM_TYPE_USB_V1X		10
+#define PEF_CH_MEDIUM_TYPE_USB_V2X		11
+#define PEF_CH_MEDIUM_TYPE_SYSTEM		12
+BIT_DESC_MAP_LIST,
+{	{"IPMB (I2C)",								PEF_CH_MEDIUM_TYPE_IPMB},
+	{"ICMB v1.0",								PEF_CH_MEDIUM_TYPE_ICMB_10},
+	{"ICMB v0.9",								PEF_CH_MEDIUM_TYPE_ICMB_09},
+	{"802.3 LAN",								PEF_CH_MEDIUM_TYPE_LAN},
+	{"Serial/Modem (RS-232)",				PEF_CH_MEDIUM_TYPE_SERIAL},
+	{"Other LAN",								PEF_CH_MEDIUM_TYPE_XLAN},
+	{"PCI SMBus",								PEF_CH_MEDIUM_TYPE_PCI_SMBUS},
+	{"SMBus v1.0/1.1",						PEF_CH_MEDIUM_TYPE_SMBUS_V1X},
+	{"SMBus v2.0",								PEF_CH_MEDIUM_TYPE_SMBUS_V2X},
+	{"USB 1.x",									PEF_CH_MEDIUM_TYPE_USB_V1X},
+	{"USB 2.x",									PEF_CH_MEDIUM_TYPE_USB_V2X},
+	{"System I/F (KCS,SMIC,BT)",			PEF_CH_MEDIUM_TYPE_SYSTEM},
+	{NULL}
+}	};
+
+struct pef_cfgparm_selector {
+#define PEF_CFGPARM_ID_REVISION_ONLY_MASK 0x80
+#define PEF_CFGPARM_ID_SET_IN_PROGRESS 0
+#define PEF_CFGPARM_ID_PEF_CONTROL 1
+#define PEF_CFGPARM_ID_PEF_ACTION 2
+#define PEF_CFGPARM_ID_PEF_STARTUP_DELAY 3
+#define PEF_CFGPARM_ID_PEF_ALERT_STARTUP_DELAY 4
+#define PEF_CFGPARM_ID_PEF_FILTER_TABLE_SIZE 5
+#define PEF_CFGPARM_ID_PEF_FILTER_TABLE_ENTRY 6
+#define PEF_CFGPARM_ID_PEF_FILTER_TABLE_DATA_1 7
+#define PEF_CFGPARM_ID_PEF_ALERT_POLICY_TABLE_SIZE 8
+#define PEF_CFGPARM_ID_PEF_ALERT_POLICY_TABLE_ENTRY 9
+#define PEF_CFGPARM_ID_SYSTEM_GUID 10
+#define PEF_CFGPARM_ID_PEF_ALERT_STRING_TABLE_SIZE 11
+#define PEF_CFGPARM_ID_PEF_ALERT_STRING_KEY 12
+#define PEF_CFGPARM_ID_PEF_ALERT_STRING_TABLE_ENTRY 13
+	uint8_t id;
+	uint8_t set;
+	uint8_t block;
+} __attribute__ ((packed));
+
+struct pef_cfgparm_set_in_progress {
+#define PEF_SET_IN_PROGRESS_COMMIT_WRITE 0x02 
+#define PEF_SET_IN_PROGRESS 0x01
+	uint8_t data1;
+} __attribute__ ((packed));
+
+struct pef_cfgparm_control {
+#define PEF_CONTROL_ENABLE_ALERT_STARTUP_DELAY 0x08
+#define PEF_CONTROL_ENABLE_STARTUP_DELAY 0x04
+#define PEF_CONTROL_ENABLE_EVENT_MESSAGES 0x02
+#define PEF_CONTROL_ENABLE 0x01
+	uint8_t data1;
+} __attribute__ ((packed));
+
+static struct bit_desc_map
+pef_b2s_control __attribute__((unused)) = {
+BIT_DESC_MAP_ALL,
+{	{"PEF",							PEF_CONTROL_ENABLE},
+	{"PEF event messages",		PEF_CONTROL_ENABLE_EVENT_MESSAGES},
+	{"PEF startup delay",		PEF_CONTROL_ENABLE_STARTUP_DELAY},
+	{"Alert startup delay",		PEF_CONTROL_ENABLE_ALERT_STARTUP_DELAY},
+	{NULL}
+}	};
+
+struct pef_cfgparm_action {
+#define PEF_ACTION_ENABLE_DIAGNOSTIC_INTERRUPT 0x20
+#define PEF_ACTION_ENABLE_OEM 0x10
+#define PEF_ACTION_ENABLE_POWER_CYCLE 0x08
+#define PEF_ACTION_ENABLE_RESET 0x04
+#define PEF_ACTION_ENABLE_POWER_DOWN 0x02
+#define PEF_ACTION_ENABLE_ALERT 0x01
+	uint8_t data1;
+} __attribute__ ((packed));
+
+struct pef_cfgparm_startup_delay {
+	uint8_t data1;
+} __attribute__ ((packed));
+
+struct pef_cfgparm_alert_startup_delay {
+	uint8_t data1;
+} __attribute__ ((packed));
+
+struct pef_cfgparm_filter_table_size {
+#define PEF_FILTER_TABLE_SIZE_MASK 0x7f
+	uint8_t data1;
+} __attribute__ ((packed));
+
+struct pef_cfgparm_filter_table_entry {
+#define PEF_FILTER_TABLE_ID_MASK 0x7f
+	uint8_t data1;
+	struct pef_table_entry entry;
+} __attribute__ ((packed));
+
+struct pef_cfgparm_filter_table_data_1 {
+	uint8_t data1;
+	uint8_t data2;
+} __attribute__ ((packed));
+
+struct pef_cfgparm_policy_table_size {
+#define PEF_POLICY_TABLE_SIZE_MASK 0x7f
+	uint8_t data1;
+} __attribute__ ((packed));
+
+struct pef_cfgparm_policy_table_entry {
+#define PEF_POLICY_TABLE_ID_MASK 0x7f
+	uint8_t data1;
+	struct pef_policy_entry entry;
+} __attribute__ ((packed));
+
+struct pef_cfgparm_system_guid {
+#define PEF_SYSTEM_GUID_USED_IN_PET 0x01
+	uint8_t data1;
+	uint8_t guid[16];
+} __attribute__ ((packed));
+
+struct pef_cfgparm_alert_string_table_size {
+#define PEF_ALERT_STRING_TABLE_SIZE_MASK 0x7f
+	uint8_t data1;
+} __attribute__ ((packed));
+
+struct pef_cfgparm_alert_string_keys {
+#define PEF_ALERT_STRING_ID_MASK 0x7f
+	uint8_t data1;
+#define PEF_EVENT_FILTER_ID_MASK 0x7f
+	uint8_t data2;
+#define PEF_ALERT_STRING_SET_ID_MASK 0x7f
+	uint8_t data3;
+} __attribute__ ((packed));
+
+struct pef_cfgparm_alert_string_table_entry {
+	uint8_t id;
+	uint8_t blockno;
+	uint8_t block[16];
+} __attribute__ ((packed));
+
+/* PEF - LAN */
+
+struct pef_lan_cfgparm_selector {
+#define PEF_LAN_CFGPARM_CH_REVISION_ONLY_MASK 0x80
+#define PEF_LAN_CFGPARM_CH_MASK 0x0f
+#define PEF_LAN_CFGPARM_ID_PET_COMMUNITY 16
+#define PEF_LAN_CFGPARM_ID_DEST_COUNT 17
+#define PEF_LAN_CFGPARM_ID_DESTTYPE 18
+#define PEF_LAN_CFGPARM_ID_DESTADDR 19
+	uint8_t ch;
+	uint8_t id;
+	uint8_t set;
+	uint8_t block;
+} __attribute__ ((packed));
+
+struct pef_lan_cfgparm_dest_size {
+#define PEF_LAN_DEST_TABLE_SIZE_MASK 0x0f
+	uint8_t data1;
+} __attribute__ ((packed));
+
+struct pef_lan_cfgparm_dest_type {
+#define PEF_LAN_DEST_TYPE_ID_MASK 0x0f
+	uint8_t dest;
+#define PEF_LAN_DEST_TYPE_ACK 0x80
+#define PEF_LAN_DEST_TYPE_MASK 0x07
+#define PEF_LAN_DEST_TYPE_PET 0
+#define PEF_LAN_DEST_TYPE_OEM_1 6
+#define PEF_LAN_DEST_TYPE_OEM_2 7
+	uint8_t dest_type;
+	uint8_t alert_timeout;
+#define PEF_LAN_RETRIES_MASK 0x07
+	uint8_t retries;
+} __attribute__ ((packed));
+
+static struct bit_desc_map
+pef_b2s_lan_desttype __attribute__((unused)) = {
+BIT_DESC_MAP_LIST,
+{	{"Acknowledged",		PEF_LAN_DEST_TYPE_ACK},
+	{"PET",					PEF_LAN_DEST_TYPE_PET},
+	{"OEM 1",				PEF_LAN_DEST_TYPE_OEM_1},
+	{"OEM 2",				PEF_LAN_DEST_TYPE_OEM_2},
+	{NULL}
+}	};
+
+struct pef_lan_cfgparm_dest_info {
+#define PEF_LAN_DEST_MASK 0x0f
+	uint8_t dest;
+#define PEF_LAN_DEST_ADDRTYPE_MASK 0xf0
+#define PEF_LAN_DEST_ADDRTYPE_SHIFT 4
+#define PEF_LAN_DEST_ADDRTYPE_IPV4_MAC 0x00
+	uint8_t addr_type;
+#define PEF_LAN_DEST_GATEWAY_USE_BACKUP 0x01
+	uint8_t gateway;
+	uint8_t ip[4];
+	uint8_t mac[6];
+} __attribute__ ((packed));
+
+/* PEF - Serial/PPP */
+
+struct pef_serial_cfgparm_selector {
+#define PEF_SERIAL_CFGPARM_CH_REVISION_ONLY_MASK 0x80
+#define PEF_SERIAL_CFGPARM_CH_MASK 0x0f
+#define PEF_SERIAL_CFGPARM_ID_DEST_COUNT 16
+#define PEF_SERIAL_CFGPARM_ID_DESTINFO 17
+#define PEF_SERIAL_CFGPARM_ID_DEST_DIAL_STRING_COUNT 20
+#define PEF_SERIAL_CFGPARM_ID_DEST_DIAL_STRING 21
+#define PEF_SERIAL_CFGPARM_ID_TAP_ACCT_COUNT 24
+#define PEF_SERIAL_CFGPARM_ID_TAP_ACCT_INFO 25
+#define PEF_SERIAL_CFGPARM_ID_TAP_ACCT_PAGER_STRING 27
+	uint8_t ch;
+	uint8_t id;
+	uint8_t set;
+	uint8_t block;
+} __attribute__ ((packed));
+
+struct pef_serial_cfgparm_dest_size {
+#define PEF_SERIAL_DEST_TABLE_SIZE_MASK 0x0f
+	uint8_t data1;
+} __attribute__ ((packed));
+
+struct pef_serial_cfgparm_dest_info {
+#define PEF_SERIAL_DEST_MASK 0x0f
+	uint8_t dest;
+#define PEF_SERIAL_DEST_TYPE_ACK 0x80
+#define PEF_SERIAL_DEST_TYPE_MASK 0x0f
+#define PEF_SERIAL_DEST_TYPE_DIAL 0
+#define PEF_SERIAL_DEST_TYPE_TAP 1
+#define PEF_SERIAL_DEST_TYPE_PPP 2
+#define PEF_SERIAL_DEST_TYPE_BASIC_CALLBACK 3
+#define PEF_SERIAL_DEST_TYPE_PPP_CALLBACK 4
+#define PEF_SERIAL_DEST_TYPE_OEM_1 14
+#define PEF_SERIAL_DEST_TYPE_OEM_2 15
+	uint8_t dest_type;
+	uint8_t alert_timeout;
+#define PEF_SERIAL_RETRIES_MASK 0x77
+#define PEF_SERIAL_RETRIES_POST_CONNECT_MASK 0x70
+#define PEF_SERIAL_RETRIES_PRE_CONNECT_MASK 0x07
+	uint8_t retries;
+#define PEF_SERIAL_DIALPAGE_STRING_ID_MASK 0xf0
+#define PEF_SERIAL_DIALPAGE_STRING_ID_SHIFT 4
+#define PEF_SERIAL_TAP_PAGE_SERVICE_ID_MASK 0x0f 
+#define PEF_SERIAL_PPP_ACCT_IPADDR_ID_MASK 0xf0
+#define PEF_SERIAL_PPP_ACCT_IPADDR_ID_SHIFT 4
+#define PEF_SERIAL_PPP_ACCT_ID_MASK 0x0f
+#define PEF_SERIAL_CALLBACK_IPADDR_ID_MASK 0x0f
+#define PEF_SERIAL_CALLBACK_IPADDR_ID_SHIFT 4
+#define PEF_SERIAL_CALLBACK_ACCT_ID_MASK 0xf0
+	uint8_t data5;
+} __attribute__ ((packed));
+
+static struct bit_desc_map
+pef_b2s_serial_desttype __attribute__((unused)) = {
+BIT_DESC_MAP_LIST,
+{	{"Acknowledged",		PEF_SERIAL_DEST_TYPE_ACK},
+	{"TAP page",			PEF_SERIAL_DEST_TYPE_TAP},
+	{"PPP PET",				PEF_SERIAL_DEST_TYPE_PPP},
+	{"Basic callback",	PEF_SERIAL_DEST_TYPE_BASIC_CALLBACK},
+	{"PPP callback",		PEF_SERIAL_DEST_TYPE_PPP_CALLBACK},
+	{"OEM 1",				PEF_SERIAL_DEST_TYPE_OEM_1},
+	{"OEM 2",				PEF_SERIAL_DEST_TYPE_OEM_2},
+	{NULL}
+}	};
+
+struct pef_serial_cfgparm_dial_string_count {
+#define PEF_SERIAL_DIAL_STRING_COUNT_MASK 0x0f
+	uint8_t data1;
+} __attribute__ ((packed));
+
+struct pef_serial_cfgparm_dial_string {
+#define PEF_SERIAL_DIAL_STRING_MASK 0x0f
+	uint8_t data1;
+	uint8_t data2;
+	uint8_t data3;
+} __attribute__ ((packed));
+
+struct pef_serial_cfgparm_tap_acct_count {
+#define PEF_SERIAL_TAP_ACCT_COUNT_MASK 0x0f
+	uint8_t data1;
+} __attribute__ ((packed));
+
+struct pef_serial_cfgparm_tap_acct_info {
+	uint8_t data1;
+#define PEF_SERIAL_TAP_ACCT_INFO_DIAL_STRING_ID_MASK 0xf0
+#define PEF_SERIAL_TAP_ACCT_INFO_DIAL_STRING_ID_SHIFT 4
+#define PEF_SERIAL_TAP_ACCT_INFO_SVC_SETTINGS_ID_MASK 0x0f
+	uint8_t data2;
+} __attribute__ ((packed));
+
+struct pef_serial_cfgparm_tap_svc_settings {
+	uint8_t data1;
+#define PEF_SERIAL_TAP_CONFIRMATION_ACK_AFTER_ETX 0x0
+#define PEF_SERIAL_TAP_CONFIRMATION_211_ACK_AFTER_ETX 0x01
+#define PEF_SERIAL_TAP_CONFIRMATION_21X_ACK_AFTER_ETX 0x02
+	uint8_t confirmation_flags;
+	uint8_t service_type[3];
+	uint8_t escape_mask[4];
+	uint8_t timeout_parms[3];
+	uint8_t retry_parms[2];
+} __attribute__ ((packed));
+
+static struct bit_desc_map
+pef_b2s_tap_svc_confirm __attribute__((unused)) = {
+BIT_DESC_MAP_LIST,
+{	{"ACK",						PEF_SERIAL_TAP_CONFIRMATION_ACK_AFTER_ETX},
+	{"211+ACK",					PEF_SERIAL_TAP_CONFIRMATION_211_ACK_AFTER_ETX},
+	{"{211|213}+ACK",			PEF_SERIAL_TAP_CONFIRMATION_21X_ACK_AFTER_ETX},
+	{NULL}
+}	};
+
+#if 0		/* FYI : config parm groupings */
+	struct pef_config_parms {								/* PEF */
+		struct pef_cfgparm_set_in_progress;
+		struct pef_cfgparm_control;
+		struct pef_cfgparm_action;
+		struct pef_cfgparm_startup_delay;				/* in seconds, 1-based */
+		struct pef_cfgparm_alert_startup_delay;		/* in seconds, 1-based */
+		struct pef_cfgparm_filter_table_size;			/* 1-based, READ-ONLY */
+		struct pef_cfgparm_filter_table_entry;
+		struct pef_cfgparm_filter_table_data_1;
+		struct pef_cfgparm_policy_table_size;
+		struct pef_cfgparm_policy_table_entry;
+		struct pef_cfgparm_system_guid;
+		struct pef_cfgparm_alert_string_table_size;
+		struct pef_cfgparm_alert_string_keys;
+		struct pef_cfgparm_alert_string_table_entry;
+	} __attribute__ ((packed));
+
+	struct pef_lan_config_parms {							/* LAN */
+		struct pef_lan_cfgparm_set_in_progress;
+		struct pef_lan_cfgparm_auth_capabilities;
+		struct pef_lan_cfgparm_auth_type;
+		struct pef_lan_cfgparm_ip_address;
+		struct pef_lan_cfgparm_ip_address_source;
+		struct pef_lan_cfgparm_mac_address;
+		struct pef_lan_cfgparm_subnet_mask;
+		struct pef_lan_cfgparm_ipv4_header_parms;
+		struct pef_lan_cfgparm_primary_rmcp_port;
+		struct pef_lan_cfgparm_secondary_rmcp_port;
+		struct pef_lan_cfgparm_bmc_generated_arp_control;
+		struct pef_lan_cfgparm_gratuitous_arp;
+		struct pef_lan_cfgparm_default_gateway_ipaddr;
+		struct pef_lan_cfgparm_default_gateway_macaddr;
+		struct pef_lan_cfgparm_backup_gateway_ipaddr;
+		struct pef_lan_cfgparm_backup_gateway_macaddr;
+		struct pef_lan_cfgparm_pet_community;
+		struct pef_lan_cfgparm_destination_count;
+		struct pef_lan_cfgparm_destination_type;
+		struct pef_lan_cfgparm_destination_ipaddr;
+	} __attribute__ ((packed));
+
+	struct pef_serial_config_parms {						/* Serial/PPP */
+		struct pef_serial_cfgparm_set_in_progress;
+		struct pef_serial_cfgparm_auth_capabilities;
+		struct pef_serial_cfgparm_auth_type;
+		struct pef_serial_cfgparm_connection_mode;
+		struct pef_serial_cfgparm_idle_timeout;
+		struct pef_serial_cfgparm_callback_control;
+		struct pef_serial_cfgparm_session_termination;
+		struct pef_serial_cfgparm_ipmi_settings;
+		struct pef_serial_cfgparm_mux_control;
+		struct pef_serial_cfgparm_modem_ring_time;
+		struct pef_serial_cfgparm_modem_init_string;
+		struct pef_serial_cfgparm_modem_escape_sequence;
+		struct pef_serial_cfgparm_modem_hangup_sequence;
+		struct pef_serial_cfgparm_modem_dial_command;
+		struct pef_serial_cfgparm_page_blackout_interval;
+		struct pef_serial_cfgparm_pet_community;
+		struct pef_serial_cfgparm_destination_count;
+		struct pef_serial_cfgparm_destination_info;
+		struct pef_serial_cfgparm_call_retry_interval;
+		struct pef_serial_cfgparm_destination_settings;
+		struct pef_serial_cfgparm_dialstring_count;
+		struct pef_serial_cfgparm_dialstring_info;
+		struct pef_serial_cfgparm_ipaddr_count;
+		struct pef_serial_cfgparm_ipaddr_info;
+		struct pef_serial_cfgparm_tap_acct_count;
+		struct pef_serial_cfgparm_tap_acct_info;
+		struct pef_serial_cfgparm_tap_acct_passwords;			/* WRITE only */
+		struct pef_serial_cfgparm_tap_pager_id_strings;
+		struct pef_serial_cfgparm_tap_service_settings;
+		struct pef_serial_cfgparm_terminal_mode_config;
+		struct pef_serial_cfgparm_ppp_otions;
+		struct pef_serial_cfgparm_ppp_primary_rmcp_port;
+		struct pef_serial_cfgparm_ppp_secondary_rmcp_port;
+		struct pef_serial_cfgparm_ppp_link_auth;
+		struct pef_serial_cfgparm_ppp_chap_name;
+		struct pef_serial_cfgparm_ppp_accm;
+		struct pef_serial_cfgparm_ppp_snoop_accm;
+		struct pef_serial_cfgparm_ppp_acct_count;
+		struct pef_serial_cfgparm_ppp_acct_dialstring_selector;
+		struct pef_serial_cfgparm_ppp_acct_ipaddrs;
+		struct pef_serial_cfgparm_ppp_acct_user_names;
+		struct pef_serial_cfgparm_ppp_acct_user_domains;
+		struct pef_serial_cfgparm_ppp_acct_user_passwords;		/* WRITE only */
+		struct pef_serial_cfgparm_ppp_acct_auth_settings;
+		struct pef_serial_cfgparm_ppp_acct_connect_hold_times;
+		struct pef_serial_cfgparm_ppp_udp_proxy_ipheader;
+		struct pef_serial_cfgparm_ppp_udp_proxy_xmit_bufsize;
+		struct pef_serial_cfgparm_ppp_udp_proxy_recv_bufsize;
+		struct pef_serial_cfgparm_ppp_remote_console_ipaddr;
+	} __attribute__ ((packed));
+#endif
+
+#define IPMI_CMD_GET_PEF_CAPABILITIES 0x10
+#define IPMI_CMD_GET_PEF_CONFIG_PARMS 0x13
+#define IPMI_CMD_GET_LAST_PROCESSED_EVT_ID 0x15
+#define IPMI_CMD_GET_SYSTEM_GUID 0x37
+#define IPMI_CMD_GET_CHANNEL_INFO 0x42
+#define IPMI_CMD_LAN_GET_CONFIG 0x02
+#define IPMI_CMD_SERIAL_GET_CONFIG 0x11
+
+const char * ipmi_pef_bit_desc(struct bit_desc_map * map, uint32_t val);
+void ipmi_pef_print_flags(struct bit_desc_map * map, flg_e type, uint32_t val);
+void ipmi_pef_print_dec(const char * text, uint32_t val);
+void ipmi_pef_print_hex(const char * text, uint32_t val);
+void ipmi_pef_print_1xd(const char * text, uint32_t val);
+void ipmi_pef_print_2xd(const char * text, uint8_t u1, uint8_t u2);
+void ipmi_pef_print_str(const char * text, const char * val);
+
+int ipmi_pef_main(struct ipmi_intf * intf, int argc, char ** argv);
+
+#endif /* IPMI_PEF_H */

ipmitool/include/ipmitool/ipmi_picmg.h

@@ -0,0 +1,75 @@
+
+/*
+	(C) Kontron
+*/
+
+#ifndef _IPMI_PICMG_H_
+#define _IPMI_PICMG_H_
+
+#include <ipmitool/ipmi.h>
+
+/* PICMG commands */
+#define PICMG_GET_PICMG_PROPERTIES_CMD			0x00
+#define PICMG_GET_ADDRESS_INFO_CMD 				0x01
+#define PICMG_GET_SHELF_ADDRESS_INFO_CMD		0x02
+#define PICMG_SET_SHELF_ADDRESS_INFO_CMD		0x03
+#define PICMG_FRU_CONTROL_CMD					0x04
+#define PICMG_GET_FRU_LED_PROPERTIES_CMD		0x05
+#define PICMG_GET_LED_COLOR_CAPABILITIES_CMD 	0x06
+#define PICMG_SET_FRU_LED_STATE_CMD				0x07
+#define PICMG_GET_FRU_LED_STATE_CMD				0x08
+#define PICMG_SET_IPMB_CMD						0x09
+#define PICMG_SET_FRU_POLICY_CMD				0x0A
+#define PICMG_GET_FRU_POLICY_CMD				0x0B
+#define PICMG_FRU_ACTIVATION_CMD				0x0C
+#define PICMG_GET_DEVICE_LOCATOR_RECORD_CMD		0x0D
+#define PICMG_SET_PORT_STATE_CMD				0x0E
+#define PICMG_GET_PORT_STATE_CMD				0x0F
+#define PICMG_COMPUTE_POWER_PROPERTIES_CMD		0x10
+#define PICMG_SET_POWER_LEVEL_CMD				0x11
+#define PICMG_GET_POWER_LEVEL_CMD				0x12
+#define PICMG_RENEGOTIATE_POWER_CMD				0x13
+#define PICMG_GET_FAN_SPEED_PROPERTIES_CMD		0x14
+#define PICMG_SET_FAN_LEVEL_CMD					0x15
+#define PICMG_GET_FAN_LEVEL_CMD					0x16
+#define PICMG_BUSED_RESOURCE_CMD				0x17
+
+/* Site Types */
+#define PICMG_ATCA_BOARD		0x00
+#define PICMG_POWER_ENTRY		0x01
+#define PICMG_SHELF_FRU			0x02
+#define PICMG_DEDICATED_SHMC 	0x03
+#define PICMG_FAN_TRAY			0x04
+#define PICMG_FAN_FILTER_TRAY	0x05
+#define PICMG_ALARM				0x06
+#define PICMG_AMC				0x07
+#define PICMG_PMC				0x08
+#define PICMG_RTM				0x09
+
+
+
+struct picmg_set_fru_activation_cmd {
+	unsigned char	picmg_id;     	/* always 0*/
+	unsigned char	fru_id;      	/* threshold setting mask */
+	unsigned char	fru_state;		/* fru activation/deactivation */
+} __attribute__ ((packed));
+
+
+
+/* the LED color capabilities */
+static const char* led_color_str[] __attribute__((unused)) = {
+	"reserved",
+	"BLUE",
+	"RED",
+	"GREEN",
+	"AMBER",
+	"ORANGE",
+	"WHITE",
+	"reserved"
+};
+
+
+
+int ipmi_picmg_main (struct ipmi_intf * intf, int argc, char ** argv);
+
+#endif

ipmitool/include/ipmitool/ipmi_raw.h

@@ -0,0 +1,42 @@
+/*
+ * Copyright (c) 2003 Sun Microsystems, Inc.  All Rights Reserved.
+ * 
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 
+ * Redistribution of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 
+ * Redistribution in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * 
+ * Neither the name of Sun Microsystems, Inc. or the names of
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ * 
+ * This software is provided "AS IS," without a warranty of any kind.
+ * ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND WARRANTIES,
+ * INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A
+ * PARTICULAR PURPOSE OR NON-INFRINGEMENT, ARE HEREBY EXCLUDED.
+ * SUN MICROSYSTEMS, INC. ("SUN") AND ITS LICENSORS SHALL NOT BE LIABLE
+ * FOR ANY DAMAGES SUFFERED BY LICENSEE AS A RESULT OF USING, MODIFYING
+ * OR DISTRIBUTING THIS SOFTWARE OR ITS DERIVATIVES.  IN NO EVENT WILL
+ * SUN OR ITS LICENSORS BE LIABLE FOR ANY LOST REVENUE, PROFIT OR DATA,
+ * OR FOR DIRECT, INDIRECT, SPECIAL, CONSEQUENTIAL, INCIDENTAL OR
+ * PUNITIVE DAMAGES, HOWEVER CAUSED AND REGARDLESS OF THE THEORY OF
+ * LIABILITY, ARISING OUT OF THE USE OF OR INABILITY TO USE THIS SOFTWARE,
+ * EVEN IF SUN HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
+ */
+
+#ifndef IPMI_RAW_H
+#define IPMI_RAW_H
+
+#include <ipmitool/ipmi.h>
+
+int ipmi_raw_main(struct ipmi_intf * intf, int argc, char ** argv);
+struct ipmi_rs * ipmi_master_write_read(struct ipmi_intf * intf, uint8_t addr, uint8_t * wdata, uint8_t wsize, uint8_t rsize);
+int ipmi_rawi2c_main(struct ipmi_intf * intf, int argc, char ** argv);
+
+#endif /* IPMI_RAW_H */

ipmitool/include/ipmitool/ipmi_sel.h

@@ -28,16 +28,27 @@
  * PUNITIVE DAMAGES, HOWEVER CAUSED AND REGARDLESS OF THE THEORY OF
  * LIABILITY, ARISING OUT OF THE USE OF OR INABILITY TO USE THIS SOFTWARE,
  * EVEN IF SUN HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
- * 
- * You acknowledge that this software is not designed or intended for use
- * in the design, construction, operation or maintenance of any nuclear
- * facility.
  */
 
 #ifndef IPMI_SEL_H
 #define IPMI_SEL_H
 
+#include <inttypes.h>
 #include <ipmitool/ipmi.h>
+#include <ipmitool/ipmi_sdr.h>
+
+#define IPMI_CMD_GET_SEL_INFO		0x40
+#define IPMI_CMD_GET_SEL_ALLOC_INFO	0x41
+#define IPMI_CMD_RESERVE_SEL		0x42
+#define IPMI_CMD_GET_SEL_ENTRY		0x43
+#define IPMI_CMD_ADD_SEL_ENTRY		0x44
+#define IPMI_CMD_PARTIAL_ADD_SEL_ENTRY	0x45
+#define IPMI_CMD_DELETE_SEL_ENTRY	0x46
+#define IPMI_CMD_CLEAR_SEL		0x47
+#define IPMI_CMD_GET_SEL_TIME		0x48
+#define IPMI_CMD_SET_SEL_TIME		0x49
+#define IPMI_CMD_GET_AUX_LOG_STATUS	0x5A
+#define IPMI_CMD_SET_AUX_LOG_STATUS	0x5B
 
 enum {
 	IPMI_EVENT_CLASS_DISCRETE,
@@ -47,315 +58,493 @@ enum {
 };
 
 struct sel_get_rq {
-	unsigned short	reserve_id;
-	unsigned short	record_id;
-	unsigned char	offset;
-	unsigned char	length;
+	uint16_t	reserve_id;
+	uint16_t	record_id;
+	uint8_t	offset;
+	uint8_t	length;
 } __attribute__ ((packed));
 
+struct standard_spec_sel_rec{
+	uint32_t	timestamp;
+	uint16_t	gen_id;
+	uint8_t	evm_rev;
+	uint8_t	sensor_type;
+	uint8_t	sensor_num;
+#if WORDS_BIGENDIAN
+	uint8_t	event_dir  : 1;
+	uint8_t	event_type : 7;
+#else
+	uint8_t	event_type : 7;
+	uint8_t	event_dir  : 1;
+#endif
+#define DATA_BYTE2_SPECIFIED_MASK 0xc0    /* event_data[0] bit mask */
+#define DATA_BYTE3_SPECIFIED_MASK 0x30    /* event_data[0] bit mask */
+#define EVENT_OFFSET_MASK         0x0f    /* event_data[0] bit mask */
+	uint8_t	event_data[3];
+};
+
+#define SEL_OEM_TS_DATA_LEN		6
+#define SEL_OEM_NOTS_DATA_LEN		13
+struct oem_ts_spec_sel_rec{
+	uint32_t timestamp;
+	uint8_t manf_id[3];
+	uint8_t	oem_defined[SEL_OEM_TS_DATA_LEN];
+};
+
+struct oem_nots_spec_sel_rec{
+	uint8_t oem_defined[SEL_OEM_NOTS_DATA_LEN];
+};
+
 struct sel_event_record {
-	unsigned short	record_id;
-	unsigned char	record_type;
-	unsigned long	timestamp;
-	unsigned short	gen_id;
-	unsigned char	evm_rev;
-	unsigned char	sensor_type;
-	unsigned char	sensor_num;
-	unsigned char	event_type : 7;
-	unsigned char	event_dir  : 1;
-	unsigned char	event_data[3];
+	uint16_t	record_id;
+	uint8_t	record_type;
+	union{
+		struct standard_spec_sel_rec standard_type;
+		struct oem_ts_spec_sel_rec oem_ts_type;
+		struct oem_nots_spec_sel_rec oem_nots_type;
+	} sel_type;
 } __attribute__ ((packed));
 
-struct sel_oem_record_ts {
-	unsigned short	next_id;
-	unsigned short	record_id;
-	unsigned char	record_type;
-	unsigned long	timestamp;
-	unsigned char	mfg_id[3];
-	unsigned char	oem_defined[6];
-} __attribute__ ((packed));
-
-struct sel_oem_record_nots {
-	unsigned short	next_id;
-	unsigned short	record_id;
-	unsigned char	record_type;
-	unsigned char	oem_defined[13];
-} __attribute__ ((packed));
-
-
 struct ipmi_event_sensor_types {
-	unsigned char	code;
-	unsigned char	offset;
-	unsigned char	class;
+	uint8_t	code;
+	uint8_t	offset;
+#define ALL_OFFSETS_SPECIFIED  0xff
+	uint8_t   data;
+	uint8_t	class;
 	const char	* type;
 	const char	* desc;
 };
 
 static struct ipmi_event_sensor_types generic_event_types[] __attribute__((unused)) = {
 	/* Threshold Based States */
-	{ 0x01, 0x00, IPMI_EVENT_CLASS_THRESHOLD, "Threshold", "Lower Non-critical - going low" },
-	{ 0x01, 0x01, IPMI_EVENT_CLASS_THRESHOLD, "Threshold", "Lower Non-critical - going high" },
-	{ 0x01, 0x02, IPMI_EVENT_CLASS_THRESHOLD, "Threshold", "Lower Critical - going low" },
-	{ 0x01, 0x03, IPMI_EVENT_CLASS_THRESHOLD, "Threshold", "Lower Critical - going high" },
-	{ 0x01, 0x04, IPMI_EVENT_CLASS_THRESHOLD, "Threshold", "Lower Non-recoverable - going low" },
-	{ 0x01, 0x05, IPMI_EVENT_CLASS_THRESHOLD, "Threshold", "Lower Non-recoverable - going high" },
-	{ 0x01, 0x06, IPMI_EVENT_CLASS_THRESHOLD, "Threshold", "Upper Non-critical - going low" },
-	{ 0x01, 0x07, IPMI_EVENT_CLASS_THRESHOLD, "Threshold", "Upper Non-critical - going high" },
-	{ 0x01, 0x08, IPMI_EVENT_CLASS_THRESHOLD, "Threshold", "Upper Critical - going low" },
-	{ 0x01, 0x09, IPMI_EVENT_CLASS_THRESHOLD, "Threshold", "Upper Critical - going high" },
-	{ 0x01, 0x0a, IPMI_EVENT_CLASS_THRESHOLD, "Threshold", "Upper Non-recoverable - going low" },
-	{ 0x01, 0x0b, IPMI_EVENT_CLASS_THRESHOLD, "Threshold", "Upper Non-recoverable - going high" },
+	{ 0x01, 0x00, 0xff, IPMI_EVENT_CLASS_THRESHOLD, "Threshold", "Lower Non-critical going low " },
+	{ 0x01, 0x01, 0xff, IPMI_EVENT_CLASS_THRESHOLD, "Threshold", "Lower Non-critical going high" },
+	{ 0x01, 0x02, 0xff, IPMI_EVENT_CLASS_THRESHOLD, "Threshold", "Lower Critical going low " },
+	{ 0x01, 0x03, 0xff, IPMI_EVENT_CLASS_THRESHOLD, "Threshold", "Lower Critical going high" },
+	{ 0x01, 0x04, 0xff, IPMI_EVENT_CLASS_THRESHOLD, "Threshold", "Lower Non-recoverable going low " },
+	{ 0x01, 0x05, 0xff, IPMI_EVENT_CLASS_THRESHOLD, "Threshold", "Lower Non-recoverable going high" },
+	{ 0x01, 0x06, 0xff, IPMI_EVENT_CLASS_THRESHOLD, "Threshold", "Upper Non-critical going low " },
+	{ 0x01, 0x07, 0xff, IPMI_EVENT_CLASS_THRESHOLD, "Threshold", "Upper Non-critical going high" },
+	{ 0x01, 0x08, 0xff, IPMI_EVENT_CLASS_THRESHOLD, "Threshold", "Upper Critical going low " },
+	{ 0x01, 0x09, 0xff, IPMI_EVENT_CLASS_THRESHOLD, "Threshold", "Upper Critical going high" },
+	{ 0x01, 0x0a, 0xff, IPMI_EVENT_CLASS_THRESHOLD, "Threshold", "Upper Non-recoverable going low " },
+	{ 0x01, 0x0b, 0xff, IPMI_EVENT_CLASS_THRESHOLD, "Threshold", "Upper Non-recoverable going high" },
 	/* DMI-based "usage state" States */
-	{ 0x02, 0x00, IPMI_EVENT_CLASS_DISCRETE, "Usage State", "Transition to Idle" },
-	{ 0x02, 0x01, IPMI_EVENT_CLASS_DISCRETE, "Usage State", "Transition to Active" },
-	{ 0x02, 0x02, IPMI_EVENT_CLASS_DISCRETE, "Usage State", "Transition to Busy" },
+	{ 0x02, 0x00, 0xff, IPMI_EVENT_CLASS_DISCRETE, "Usage State", "Transition to Idle" },
+	{ 0x02, 0x01, 0xff, IPMI_EVENT_CLASS_DISCRETE, "Usage State", "Transition to Active" },
+	{ 0x02, 0x02, 0xff, IPMI_EVENT_CLASS_DISCRETE, "Usage State", "Transition to Busy" },
 	/* Digital-Discrete Event States */
-	{ 0x03, 0x00, IPMI_EVENT_CLASS_DIGITAL, "Digital State",  "State Deasserted" },
-	{ 0x03, 0x01, IPMI_EVENT_CLASS_DIGITAL, "Digital State",  "State Asserted" },
-	{ 0x04, 0x00, IPMI_EVENT_CLASS_DIGITAL, "Digital State",  "Predictive Failure Deasserted" },
-	{ 0x04, 0x01, IPMI_EVENT_CLASS_DIGITAL, "Digital State",  "Predictive Failure Asserted" },
-	{ 0x05, 0x00, IPMI_EVENT_CLASS_DIGITAL, "Digital State",  "Limit Not Exceeded" },
-	{ 0x05, 0x01, IPMI_EVENT_CLASS_DIGITAL, "Digital State",  "Limit Exceeded" },
-	{ 0x06, 0x00, IPMI_EVENT_CLASS_DIGITAL, "Digital State",  "Performance Met" },
-	{ 0x06, 0x01, IPMI_EVENT_CLASS_DIGITAL, "Digital State",  "Performance Lags" },
+	{ 0x03, 0x00, 0xff, IPMI_EVENT_CLASS_DIGITAL, "Digital State",  "State Deasserted" },
+	{ 0x03, 0x01, 0xff, IPMI_EVENT_CLASS_DIGITAL, "Digital State",  "State Asserted" },
+	{ 0x04, 0x00, 0xff, IPMI_EVENT_CLASS_DIGITAL, "Digital State",  "Predictive Failure Deasserted" },
+	{ 0x04, 0x01, 0xff, IPMI_EVENT_CLASS_DIGITAL, "Digital State",  "Predictive Failure Asserted" },
+	{ 0x05, 0x00, 0xff, IPMI_EVENT_CLASS_DIGITAL, "Digital State",  "Limit Not Exceeded" },
+	{ 0x05, 0x01, 0xff, IPMI_EVENT_CLASS_DIGITAL, "Digital State",  "Limit Exceeded" },
+	{ 0x06, 0x00, 0xff, IPMI_EVENT_CLASS_DIGITAL, "Digital State",  "Performance Met" },
+	{ 0x06, 0x01, 0xff, IPMI_EVENT_CLASS_DIGITAL, "Digital State",  "Performance Lags" },
 	/* Severity Event States */
-	{ 0x07, 0x00, IPMI_EVENT_CLASS_DISCRETE, "Severity State", "Transition to OK" },
-	{ 0x07, 0x01, IPMI_EVENT_CLASS_DISCRETE, "Severity State", "Transition to Non-critial from OK" },
-	{ 0x07, 0x02, IPMI_EVENT_CLASS_DISCRETE, "Severity State", "Transition to Critical from less severe" },
-	{ 0x07, 0x03, IPMI_EVENT_CLASS_DISCRETE, "Severity State", "Transition to Non-recoverable from less severe" },
-	{ 0x07, 0x04, IPMI_EVENT_CLASS_DISCRETE, "Severity State", "Transition to Non-critical from more severe" },
-	{ 0x07, 0x05, IPMI_EVENT_CLASS_DISCRETE, "Severity State", "Transition to Critical from Non-recoverable" },
-	{ 0x07, 0x06, IPMI_EVENT_CLASS_DISCRETE, "Severity State", "Transition to Non-recoverable" },
-	{ 0x07, 0x07, IPMI_EVENT_CLASS_DISCRETE, "Severity State", "Monitor" },
-	{ 0x07, 0x08, IPMI_EVENT_CLASS_DISCRETE, "Severity State", "Informational" },
+	{ 0x07, 0x00, 0xff, IPMI_EVENT_CLASS_DISCRETE, "Severity State", "Transition to OK" },
+	{ 0x07, 0x01, 0xff, IPMI_EVENT_CLASS_DISCRETE, "Severity State", "Transition to Non-critical from OK" },
+	{ 0x07, 0x02, 0xff, IPMI_EVENT_CLASS_DISCRETE, "Severity State", "Transition to Critical from less severe" },
+	{ 0x07, 0x03, 0xff, IPMI_EVENT_CLASS_DISCRETE, "Severity State", "Transition to Non-recoverable from less severe" },
+	{ 0x07, 0x04, 0xff, IPMI_EVENT_CLASS_DISCRETE, "Severity State", "Transition to Non-critical from more severe" },
+	{ 0x07, 0x05, 0xff, IPMI_EVENT_CLASS_DISCRETE, "Severity State", "Transition to Critical from Non-recoverable" },
+	{ 0x07, 0x06, 0xff, IPMI_EVENT_CLASS_DISCRETE, "Severity State", "Transition to Non-recoverable" },
+	{ 0x07, 0x07, 0xff, IPMI_EVENT_CLASS_DISCRETE, "Severity State", "Monitor" },
+	{ 0x07, 0x08, 0xff, IPMI_EVENT_CLASS_DISCRETE, "Severity State", "Informational" },
 	/* Availability Status States */
-	{ 0x08, 0x00, IPMI_EVENT_CLASS_DIGITAL, "Availability State",  "Device Removed/Absent" },
-	{ 0x08, 0x01, IPMI_EVENT_CLASS_DIGITAL, "Availability State",  "Device Inserted/Present" },
-	{ 0x09, 0x00, IPMI_EVENT_CLASS_DIGITAL, "Availability State",  "Device Disabled" },
-	{ 0x09, 0x01, IPMI_EVENT_CLASS_DIGITAL, "Availability State",  "Device Enabled" },
-	{ 0x0a, 0x00, IPMI_EVENT_CLASS_DISCRETE, "Availability State", "Transition to Running" },
-	{ 0x0a, 0x01, IPMI_EVENT_CLASS_DISCRETE, "Availability State", "Transition to In Test" },
-	{ 0x0a, 0x02, IPMI_EVENT_CLASS_DISCRETE, "Availability State", "Transition to Power Off" },
-	{ 0x0a, 0x03, IPMI_EVENT_CLASS_DISCRETE, "Availability State", "Transition to On Line" },
-	{ 0x0a, 0x04, IPMI_EVENT_CLASS_DISCRETE, "Availability State", "Transition to Off Line" },
-	{ 0x0a, 0x05, IPMI_EVENT_CLASS_DISCRETE, "Availability State", "Transition to Off Duty" },
-	{ 0x0a, 0x06, IPMI_EVENT_CLASS_DISCRETE, "Availability State", "Transition to Degraded" },
-	{ 0x0a, 0x07, IPMI_EVENT_CLASS_DISCRETE, "Availability State", "Transition to Power Save" },
-	{ 0x0a, 0x08, IPMI_EVENT_CLASS_DISCRETE, "Availability State", "Install Error" },
+	{ 0x08, 0x00, 0xff, IPMI_EVENT_CLASS_DIGITAL, "Availability State",  "Device Absent" },
+	{ 0x08, 0x01, 0xff, IPMI_EVENT_CLASS_DIGITAL, "Availability State",  "Device Present" },
+	{ 0x09, 0x00, 0xff, IPMI_EVENT_CLASS_DIGITAL, "Availability State",  "Device Disabled" },
+	{ 0x09, 0x01, 0xff, IPMI_EVENT_CLASS_DIGITAL, "Availability State",  "Device Enabled" },
+	{ 0x0a, 0x00, 0xff, IPMI_EVENT_CLASS_DISCRETE, "Availability State", "Transition to Running" },
+	{ 0x0a, 0x01, 0xff, IPMI_EVENT_CLASS_DISCRETE, "Availability State", "Transition to In Test" },
+	{ 0x0a, 0x02, 0xff, IPMI_EVENT_CLASS_DISCRETE, "Availability State", "Transition to Power Off" },
+	{ 0x0a, 0x03, 0xff, IPMI_EVENT_CLASS_DISCRETE, "Availability State", "Transition to On Line" },
+	{ 0x0a, 0x04, 0xff, IPMI_EVENT_CLASS_DISCRETE, "Availability State", "Transition to Off Line" },
+	{ 0x0a, 0x05, 0xff, IPMI_EVENT_CLASS_DISCRETE, "Availability State", "Transition to Off Duty" },
+	{ 0x0a, 0x06, 0xff, IPMI_EVENT_CLASS_DISCRETE, "Availability State", "Transition to Degraded" },
+	{ 0x0a, 0x07, 0xff, IPMI_EVENT_CLASS_DISCRETE, "Availability State", "Transition to Power Save" },
+	{ 0x0a, 0x08, 0xff, IPMI_EVENT_CLASS_DISCRETE, "Availability State", "Install Error" },
 	/* Redundancy States */
-	{ 0x0b, 0x00, IPMI_EVENT_CLASS_DISCRETE, "Redundancy State", "Fully Redundant" },
-	{ 0x0b, 0x01, IPMI_EVENT_CLASS_DISCRETE, "Redundancy State", "Redundancy Lost" },
-	{ 0x0b, 0x02, IPMI_EVENT_CLASS_DISCRETE, "Redundancy State", "Redundancy Degraded" },
-	{ 0x0b, 0x03, IPMI_EVENT_CLASS_DISCRETE, "Redundancy State", "Non-Redundant: Sufficient from Redundant" },
-	{ 0x0b, 0x04, IPMI_EVENT_CLASS_DISCRETE, "Redundancy State", "Non-Redundant: Sufficient from Insufficient" },
-	{ 0x0b, 0x05, IPMI_EVENT_CLASS_DISCRETE, "Redundancy State", "Non-Redundant: Insufficient Resources" },
-	{ 0x0b, 0x06, IPMI_EVENT_CLASS_DISCRETE, "Redundancy State", "Redundancy Degraded from Fully Redundant" },
-	{ 0x0b, 0x07, IPMI_EVENT_CLASS_DISCRETE, "Redundancy State", "Redundancy Degraded from Non-Redundant" },
+	{ 0x0b, 0x00, 0xff, IPMI_EVENT_CLASS_DISCRETE, "Redundancy State", "Fully Redundant" },
+	{ 0x0b, 0x01, 0xff, IPMI_EVENT_CLASS_DISCRETE, "Redundancy State", "Redundancy Lost" },
+	{ 0x0b, 0x02, 0xff, IPMI_EVENT_CLASS_DISCRETE, "Redundancy State", "Redundancy Degraded" },
+	{ 0x0b, 0x03, 0xff, IPMI_EVENT_CLASS_DISCRETE, "Redundancy State", "Non-Redundant: Sufficient from Redundant" },
+	{ 0x0b, 0x04, 0xff, IPMI_EVENT_CLASS_DISCRETE, "Redundancy State", "Non-Redundant: Sufficient from Insufficient" },
+	{ 0x0b, 0x05, 0xff, IPMI_EVENT_CLASS_DISCRETE, "Redundancy State", "Non-Redundant: Insufficient Resources" },
+	{ 0x0b, 0x06, 0xff, IPMI_EVENT_CLASS_DISCRETE, "Redundancy State", "Redundancy Degraded from Fully Redundant" },
+	{ 0x0b, 0x07, 0xff, IPMI_EVENT_CLASS_DISCRETE, "Redundancy State", "Redundancy Degraded from Non-Redundant" },
 	/* ACPI Device Power States */
-	{ 0x0c, 0x00, IPMI_EVENT_CLASS_DISCRETE, "ACPI Device Power State", "D0 Power State" },
-	{ 0x0c, 0x01, IPMI_EVENT_CLASS_DISCRETE, "ACPI Device Power State", "D1 Power State" },
-	{ 0x0c, 0x02, IPMI_EVENT_CLASS_DISCRETE, "ACPI Device Power State", "D2 Power State" },
-	{ 0x0c, 0x03, IPMI_EVENT_CLASS_DISCRETE, "ACPI Device Power State", "D3 Power State" },
+	{ 0x0c, 0x00, 0xff, IPMI_EVENT_CLASS_DISCRETE, "ACPI Device Power State", "D0 Power State" },
+	{ 0x0c, 0x01, 0xff, IPMI_EVENT_CLASS_DISCRETE, "ACPI Device Power State", "D1 Power State" },
+	{ 0x0c, 0x02, 0xff, IPMI_EVENT_CLASS_DISCRETE, "ACPI Device Power State", "D2 Power State" },
+	{ 0x0c, 0x03, 0xff, IPMI_EVENT_CLASS_DISCRETE, "ACPI Device Power State", "D3 Power State" },
 	/* END */
-	{ 0x00, 0x00, 0x00, NULL, NULL },
+	{ 0x00, 0x00, 0xff, 0x00, NULL, NULL },
 };
 
 static struct ipmi_event_sensor_types sensor_specific_types[] __attribute__((unused)) = {
-	{ 0x00, 0x00, IPMI_EVENT_CLASS_DISCRETE, "Reserved",	NULL },
-	{ 0x01, 0x00, IPMI_EVENT_CLASS_DISCRETE, "Temperature",	NULL },
-	{ 0x02, 0x00, IPMI_EVENT_CLASS_DISCRETE, "Voltage",	NULL },
-	{ 0x03, 0x00, IPMI_EVENT_CLASS_DISCRETE, "Current",	NULL },
-	{ 0x04, 0x00, IPMI_EVENT_CLASS_DISCRETE, "Fan",		NULL },
+	{ 0x00, 0x00, 0xff, IPMI_EVENT_CLASS_DISCRETE, "Reserved",	NULL },
+	{ 0x01, 0x00, 0xff, IPMI_EVENT_CLASS_DISCRETE, "Temperature",	NULL },
+	{ 0x02, 0x00, 0xff, IPMI_EVENT_CLASS_DISCRETE, "Voltage",	NULL },
+	{ 0x03, 0x00, 0xff, IPMI_EVENT_CLASS_DISCRETE, "Current",	NULL },
+	{ 0x04, 0x00, 0xff, IPMI_EVENT_CLASS_DISCRETE, "Fan",		NULL },
 
-	{ 0x05, 0x00, IPMI_EVENT_CLASS_DISCRETE, "Physical Security", "General Chassis intrusion" },
-	{ 0x05, 0x01, IPMI_EVENT_CLASS_DISCRETE, "Physical Security", "Drive Bay intrusion" },
-	{ 0x05, 0x02, IPMI_EVENT_CLASS_DISCRETE, "Physical Security", "I/O Card area intrusion" },
-	{ 0x05, 0x03, IPMI_EVENT_CLASS_DISCRETE, "Physical Security", "Processor area intrusion" },
-	{ 0x05, 0x04, IPMI_EVENT_CLASS_DISCRETE, "Physical Security", "System unplugged from LAN" },
-	{ 0x05, 0x05, IPMI_EVENT_CLASS_DISCRETE, "Physical Security", "Unauthorized dock/undock" },
-	{ 0x05, 0x06, IPMI_EVENT_CLASS_DISCRETE, "Physical Security", "FAN area intrusion" },
+	{ 0x05, 0x00, 0xff, IPMI_EVENT_CLASS_DISCRETE, "Physical Security", "General Chassis intrusion" },
+	{ 0x05, 0x01, 0xff, IPMI_EVENT_CLASS_DISCRETE, "Physical Security", "Drive Bay intrusion" },
+	{ 0x05, 0x02, 0xff, IPMI_EVENT_CLASS_DISCRETE, "Physical Security", "I/O Card area intrusion" },
+	{ 0x05, 0x03, 0xff, IPMI_EVENT_CLASS_DISCRETE, "Physical Security", "Processor area intrusion" },
+	{ 0x05, 0x04, 0xff, IPMI_EVENT_CLASS_DISCRETE, "Physical Security", "System unplugged from LAN" },
+	{ 0x05, 0x05, 0xff, IPMI_EVENT_CLASS_DISCRETE, "Physical Security", "Unauthorized dock" },
+	{ 0x05, 0x06, 0xff, IPMI_EVENT_CLASS_DISCRETE, "Physical Security", "FAN area intrusion" },
 
-	{ 0x06, 0x00, IPMI_EVENT_CLASS_DISCRETE, "Platform Security", "Front Panel Lockout violation attempted" },
-	{ 0x06, 0x01, IPMI_EVENT_CLASS_DISCRETE, "Platform Security", "Pre-boot password viiolation - user password" },
-	{ 0x06, 0x02, IPMI_EVENT_CLASS_DISCRETE, "Platform Security", "Pre-boot password violation - setup password" },
-	{ 0x06, 0x03, IPMI_EVENT_CLASS_DISCRETE, "Platform Security", "Pre-boot password violation - network boot password" },
-	{ 0x06, 0x04, IPMI_EVENT_CLASS_DISCRETE, "Platform Security", "Other pre-boot password violation" },
-	{ 0x06, 0x05, IPMI_EVENT_CLASS_DISCRETE, "Platform Security", "Out-of-band access password violation" },
+	{ 0x06, 0x00, 0xff, IPMI_EVENT_CLASS_DISCRETE, "Platform Security", "Front Panel Lockout violation attempted" },
+	{ 0x06, 0x01, 0xff, IPMI_EVENT_CLASS_DISCRETE, "Platform Security", "Pre-boot password violation - user password" },
+	{ 0x06, 0x02, 0xff, IPMI_EVENT_CLASS_DISCRETE, "Platform Security", "Pre-boot password violation - setup password" },
+	{ 0x06, 0x03, 0xff, IPMI_EVENT_CLASS_DISCRETE, "Platform Security", "Pre-boot password violation - network boot password" },
+	{ 0x06, 0x04, 0xff, IPMI_EVENT_CLASS_DISCRETE, "Platform Security", "Other pre-boot password violation" },
+	{ 0x06, 0x05, 0xff, IPMI_EVENT_CLASS_DISCRETE, "Platform Security", "Out-of-band access password violation" },
 
-	{ 0x07, 0x00, IPMI_EVENT_CLASS_DISCRETE, "Processor", "IERR" },
-	{ 0x07, 0x01, IPMI_EVENT_CLASS_DISCRETE, "Processor", "Thermal Trip" },
-	{ 0x07, 0x02, IPMI_EVENT_CLASS_DISCRETE, "Processor", "FRB1/BIST failure" },
-	{ 0x07, 0x03, IPMI_EVENT_CLASS_DISCRETE, "Processor", "FRB2/Hang in POST failure" },
-	{ 0x07, 0x04, IPMI_EVENT_CLASS_DISCRETE, "Processor", "FRB3/Processor startup/init failure" },
-	{ 0x07, 0x05, IPMI_EVENT_CLASS_DISCRETE, "Processor", "Configuration Error" },
-	{ 0x07, 0x06, IPMI_EVENT_CLASS_DISCRETE, "Processor", "SM BIOS Uncorrectable CPU-complex Error" },
-	{ 0x07, 0x07, IPMI_EVENT_CLASS_DISCRETE, "Processor", "Presence detected" },
-	{ 0x07, 0x08, IPMI_EVENT_CLASS_DISCRETE, "Processor", "Disabled" },
-	{ 0x07, 0x09, IPMI_EVENT_CLASS_DISCRETE, "Processor", "Terminator presence detected" },
+	{ 0x07, 0x00, 0xff, IPMI_EVENT_CLASS_DISCRETE, "Processor", "IERR" },
+	{ 0x07, 0x01, 0xff, IPMI_EVENT_CLASS_DISCRETE, "Processor", "Thermal Trip" },
+	{ 0x07, 0x02, 0xff, IPMI_EVENT_CLASS_DISCRETE, "Processor", "FRB1/BIST failure" },
+	{ 0x07, 0x03, 0xff, IPMI_EVENT_CLASS_DISCRETE, "Processor", "FRB2/Hang in POST failure" },
+	{ 0x07, 0x04, 0xff, IPMI_EVENT_CLASS_DISCRETE, "Processor", "FRB3/Processor startup/init failure" },
+	{ 0x07, 0x05, 0xff, IPMI_EVENT_CLASS_DISCRETE, "Processor", "Configuration Error" },
+	{ 0x07, 0x06, 0xff, IPMI_EVENT_CLASS_DISCRETE, "Processor", "SM BIOS Uncorrectable CPU-complex Error" },
+	{ 0x07, 0x07, 0xff, IPMI_EVENT_CLASS_DISCRETE, "Processor", "Presence detected" },
+	{ 0x07, 0x08, 0xff, IPMI_EVENT_CLASS_DISCRETE, "Processor", "Disabled" },
+	{ 0x07, 0x09, 0xff, IPMI_EVENT_CLASS_DISCRETE, "Processor", "Terminator presence detected" },
+	{ 0x07, 0x0a, 0xff, IPMI_EVENT_CLASS_DISCRETE, "Processor", "Throttled" },
 
-	{ 0x08, 0x00, IPMI_EVENT_CLASS_DISCRETE, "Power Supply", "Presence detected" },
-	{ 0x08, 0x01, IPMI_EVENT_CLASS_DISCRETE, "Power Supply", "Failure detected" },
-	{ 0x08, 0x02, IPMI_EVENT_CLASS_DISCRETE, "Power Supply", "Predictive failure" },
-	{ 0x08, 0x03, IPMI_EVENT_CLASS_DISCRETE, "Power Supply", "Power Supply AC lost" },
-	{ 0x08, 0x04, IPMI_EVENT_CLASS_DISCRETE, "Power Supply", "AC lost or out-of-range" },
-	{ 0x08, 0x05, IPMI_EVENT_CLASS_DISCRETE, "Power Supply", "AC out-of-range, but present" },
+	{ 0x08, 0x00, 0xff, IPMI_EVENT_CLASS_DISCRETE, "Power Supply", "Presence detected" },
+	{ 0x08, 0x01, 0xff, IPMI_EVENT_CLASS_DISCRETE, "Power Supply", "Failure detected" },
+	{ 0x08, 0x02, 0xff, IPMI_EVENT_CLASS_DISCRETE, "Power Supply", "Predictive failure" },
+	{ 0x08, 0x03, 0xff, IPMI_EVENT_CLASS_DISCRETE, "Power Supply", "Power Supply AC lost" },
+	{ 0x08, 0x04, 0xff, IPMI_EVENT_CLASS_DISCRETE, "Power Supply", "AC lost or out-of-range" },
+	{ 0x08, 0x05, 0xff, IPMI_EVENT_CLASS_DISCRETE, "Power Supply", "AC out-of-range, but present" },
+	{ 0x08, 0x06, 0x00, IPMI_EVENT_CLASS_DISCRETE, "Power Supply", "Config Error: Vendor Mismatch" },
+	{ 0x08, 0x06, 0x01, IPMI_EVENT_CLASS_DISCRETE, "Power Supply", "Config Error: Revision Mismatch" },
+	{ 0x08, 0x06, 0x02, IPMI_EVENT_CLASS_DISCRETE, "Power Supply", "Config Error: Processor Missing" },
+	{ 0x08, 0x06, 0xff, IPMI_EVENT_CLASS_DISCRETE, "Power Supply", "Config Error" },
 
-	{ 0x09, 0x00, IPMI_EVENT_CLASS_DISCRETE, "Power Unit", "Power off/down" },
-	{ 0x09, 0x01, IPMI_EVENT_CLASS_DISCRETE, "Power Unit", "Power cycle" },
-	{ 0x09, 0x02, IPMI_EVENT_CLASS_DISCRETE, "Power Unit", "240VA power down" },
-	{ 0x09, 0x03, IPMI_EVENT_CLASS_DISCRETE, "Power Unit", "Interlock power down" },
-	{ 0x09, 0x04, IPMI_EVENT_CLASS_DISCRETE, "Power Unit", "AC lost" },
-	{ 0x09, 0x05, IPMI_EVENT_CLASS_DISCRETE, "Power Unit", "Soft-power control failure" },
-	{ 0x09, 0x06, IPMI_EVENT_CLASS_DISCRETE, "Power Unit", "Failure detected" },
-	{ 0x09, 0x07, IPMI_EVENT_CLASS_DISCRETE, "Power Unit", "Predictive failure" },
+	{ 0x09, 0x00, 0xff, IPMI_EVENT_CLASS_DISCRETE, "Power Unit", "Power off/down" },
+	{ 0x09, 0x01, 0xff, IPMI_EVENT_CLASS_DISCRETE, "Power Unit", "Power cycle" },
+	{ 0x09, 0x02, 0xff, IPMI_EVENT_CLASS_DISCRETE, "Power Unit", "240VA power down" },
+	{ 0x09, 0x03, 0xff, IPMI_EVENT_CLASS_DISCRETE, "Power Unit", "Interlock power down" },
+	{ 0x09, 0x04, 0xff, IPMI_EVENT_CLASS_DISCRETE, "Power Unit", "AC lost" },
+	{ 0x09, 0x05, 0xff, IPMI_EVENT_CLASS_DISCRETE, "Power Unit", "Soft-power control failure" },
+	{ 0x09, 0x06, 0xff, IPMI_EVENT_CLASS_DISCRETE, "Power Unit", "Failure detected" },
+	{ 0x09, 0x07, 0xff, IPMI_EVENT_CLASS_DISCRETE, "Power Unit", "Predictive failure" },
 
-	{ 0x0a, 0x00, IPMI_EVENT_CLASS_DISCRETE, "Cooling Device", NULL },
-	{ 0x0b, 0x00, IPMI_EVENT_CLASS_DISCRETE, "Other Units-based Sensor", NULL },
+	{ 0x0a, 0x00, 0xff, IPMI_EVENT_CLASS_DISCRETE, "Cooling Device", NULL },
+	{ 0x0b, 0x00, 0xff, IPMI_EVENT_CLASS_DISCRETE, "Other Units-based Sensor", NULL },
 
-	{ 0x0c, 0x00, IPMI_EVENT_CLASS_DISCRETE, "Memory", "Correctable ECC" },
-	{ 0x0c, 0x01, IPMI_EVENT_CLASS_DISCRETE, "Memory", "Uncorrectable ECC" },
-	{ 0x0c, 0x02, IPMI_EVENT_CLASS_DISCRETE, "Memory", "Parity" },
-	{ 0x0c, 0x03, IPMI_EVENT_CLASS_DISCRETE, "Memory", "Memory Scrub Failed" },
-	{ 0x0c, 0x04, IPMI_EVENT_CLASS_DISCRETE, "Memory", "Memory Device Disabled" },
-	{ 0x0c, 0x05, IPMI_EVENT_CLASS_DISCRETE, "Memory", "Correctable ECC logging limit reached" },
+	{ 0x0c, 0x00, 0xff, IPMI_EVENT_CLASS_DISCRETE, "Memory", "Correctable ECC" },
+	{ 0x0c, 0x01, 0xff, IPMI_EVENT_CLASS_DISCRETE, "Memory", "Uncorrectable ECC" },
+	{ 0x0c, 0x02, 0xff, IPMI_EVENT_CLASS_DISCRETE, "Memory", "Parity" },
+	{ 0x0c, 0x03, 0xff, IPMI_EVENT_CLASS_DISCRETE, "Memory", "Memory Scrub Failed" },
+	{ 0x0c, 0x04, 0xff, IPMI_EVENT_CLASS_DISCRETE, "Memory", "Memory Device Disabled" },
+	{ 0x0c, 0x05, 0xff, IPMI_EVENT_CLASS_DISCRETE, "Memory", "Correctable ECC logging limit reached" },
+	{ 0x0c, 0x06, 0xff, IPMI_EVENT_CLASS_DISCRETE, "Memory", "Presence Detected" },
+	{ 0x0c, 0x07, 0xff, IPMI_EVENT_CLASS_DISCRETE, "Memory", "Configuration Error" },
+	{ 0x0c, 0x08, 0xff, IPMI_EVENT_CLASS_DISCRETE, "Memory", "Spare" },
+	{ 0x0c, 0x09, 0xff, IPMI_EVENT_CLASS_DISCRETE, "Memory", "Throttled" },
 
-	{ 0x0d, 0x00, IPMI_EVENT_CLASS_DISCRETE, "Drive Slot", NULL },
-	{ 0x0e, 0x00, IPMI_EVENT_CLASS_DISCRETE, "POST Memory Resize", NULL },
+	{ 0x0d, 0x00, 0xff, IPMI_EVENT_CLASS_DISCRETE, "Drive Slot", "Drive Present" },
+	{ 0x0d, 0x01, 0xff, IPMI_EVENT_CLASS_DISCRETE, "Drive Slot", "Drive Fault" },
+	{ 0x0d, 0x02, 0xff, IPMI_EVENT_CLASS_DISCRETE, "Drive Slot", "Predictive Failure" },
+	{ 0x0d, 0x03, 0xff, IPMI_EVENT_CLASS_DISCRETE, "Drive Slot", "Hot Spare" },
+	{ 0x0d, 0x04, 0xff, IPMI_EVENT_CLASS_DISCRETE, "Drive Slot", "Parity Check In Progress" },
+	{ 0x0d, 0x05, 0xff, IPMI_EVENT_CLASS_DISCRETE, "Drive Slot", "In Critical Array" },
+	{ 0x0d, 0x06, 0xff, IPMI_EVENT_CLASS_DISCRETE, "Drive Slot", "In Failed Array" },
+	{ 0x0d, 0x07, 0xff, IPMI_EVENT_CLASS_DISCRETE, "Drive Slot", "Rebuild In Progress" },
+	{ 0x0d, 0x08, 0xff, IPMI_EVENT_CLASS_DISCRETE, "Drive Slot", "Rebuild Aborted" },
 
-	{ 0x0f, 0x00, IPMI_EVENT_CLASS_DISCRETE, "System Firmware", "Error" },
-	{ 0x0f, 0x01, IPMI_EVENT_CLASS_DISCRETE, "System Firmware", "Hang" },
-	{ 0x0f, 0x02, IPMI_EVENT_CLASS_DISCRETE, "System Firmware", "Progress" },
+	{ 0x0e, 0x00, 0xff, IPMI_EVENT_CLASS_DISCRETE, "POST Memory Resize", NULL },
 
-	{ 0x10, 0x00, IPMI_EVENT_CLASS_DISCRETE, "Event Logging Disabled", "Correctable memory error logging disabled" },
-	{ 0x10, 0x01, IPMI_EVENT_CLASS_DISCRETE, "Event Logging Disabled", "Event logging disabled" },
-	{ 0x10, 0x02, IPMI_EVENT_CLASS_DISCRETE, "Event Logging Disabled", "Log area reset/cleared" },
-	{ 0x10, 0x03, IPMI_EVENT_CLASS_DISCRETE, "Event Logging Disabled", "All event logging disabled" },
+	{ 0x0f, 0x00, 0x00, IPMI_EVENT_CLASS_DISCRETE, "System Firmware Error", "Unspecified" },
+	{ 0x0f, 0x00, 0x01, IPMI_EVENT_CLASS_DISCRETE, "System Firmware Error", "No system memory installed" },
+	{ 0x0f, 0x00, 0x02, IPMI_EVENT_CLASS_DISCRETE, "System Firmware Error", "No usable system memory" },
+	{ 0x0f, 0x00, 0x03, IPMI_EVENT_CLASS_DISCRETE, "System Firmware Error", "Unrecoverable IDE device failure" },
+	{ 0x0f, 0x00, 0x04, IPMI_EVENT_CLASS_DISCRETE, "System Firmware Error", "Unrecoverable system-board failure" },
+	{ 0x0f, 0x00, 0x05, IPMI_EVENT_CLASS_DISCRETE, "System Firmware Error", "Unrecoverable diskette failure" },
+	{ 0x0f, 0x00, 0x06, IPMI_EVENT_CLASS_DISCRETE, "System Firmware Error", "Unrecoverable hard-disk controller failure" },
+	{ 0x0f, 0x00, 0x07, IPMI_EVENT_CLASS_DISCRETE, "System Firmware Error", "Unrecoverable PS/2 or USB keyboard failure" },
+	{ 0x0f, 0x00, 0x08, IPMI_EVENT_CLASS_DISCRETE, "System Firmware Error", "Removable boot media not found" },
+	{ 0x0f, 0x00, 0x09, IPMI_EVENT_CLASS_DISCRETE, "System Firmware Error", "Unrecoverable video controller failure" },
+	{ 0x0f, 0x00, 0x0a, IPMI_EVENT_CLASS_DISCRETE, "System Firmware Error", "No video device selected" },
+	{ 0x0f, 0x00, 0x0b, IPMI_EVENT_CLASS_DISCRETE, "System Firmware Error", "BIOS corruption detected" },
+	{ 0x0f, 0x00, 0x0c, IPMI_EVENT_CLASS_DISCRETE, "System Firmware Error", "CPU voltage mismatch" },
+	{ 0x0f, 0x00, 0x0d, IPMI_EVENT_CLASS_DISCRETE, "System Firmware Error", "CPU speed mismatch failure" },
+	{ 0x0f, 0x00, 0xff, IPMI_EVENT_CLASS_DISCRETE, "System Firmware Error", "Unknown Error" },
 
-	{ 0x11, 0x00, IPMI_EVENT_CLASS_DISCRETE, "Watchdog 1", "BIOS Reset" },
-	{ 0x11, 0x01, IPMI_EVENT_CLASS_DISCRETE, "Watchdog 1", "OS Reset" },
-	{ 0x11, 0x02, IPMI_EVENT_CLASS_DISCRETE, "Watchdog 1", "OS Shut Down" },
-	{ 0x11, 0x03, IPMI_EVENT_CLASS_DISCRETE, "Watchdog 1", "OS Power Down" },
-	{ 0x11, 0x04, IPMI_EVENT_CLASS_DISCRETE, "Watchdog 1", "OS Power Cycle" },
-	{ 0x11, 0x05, IPMI_EVENT_CLASS_DISCRETE, "Watchdog 1", "OS NMI/diag Interrupt" },
-	{ 0x11, 0x06, IPMI_EVENT_CLASS_DISCRETE, "Watchdog 1", "OS Expired" },
-	{ 0x11, 0x07, IPMI_EVENT_CLASS_DISCRETE, "Watchdog 1", "OS pre-timeout Interrupt" },
+	{ 0x0f, 0x01, 0x00, IPMI_EVENT_CLASS_DISCRETE, "System Firmware Hang", "Unspecified" },
+	{ 0x0f, 0x01, 0x01, IPMI_EVENT_CLASS_DISCRETE, "System Firmware Hang", "Memory initialization" },
+	{ 0x0f, 0x01, 0x02, IPMI_EVENT_CLASS_DISCRETE, "System Firmware Hang", "Hard-disk initialization" },
+	{ 0x0f, 0x01, 0x03, IPMI_EVENT_CLASS_DISCRETE, "System Firmware Hang", "Secondary CPU Initialization" },
+	{ 0x0f, 0x01, 0x04, IPMI_EVENT_CLASS_DISCRETE, "System Firmware Hang", "User authentication" },
+	{ 0x0f, 0x01, 0x05, IPMI_EVENT_CLASS_DISCRETE, "System Firmware Hang", "User-initiated system setup" },
+	{ 0x0f, 0x01, 0x06, IPMI_EVENT_CLASS_DISCRETE, "System Firmware Hang", "USB resource configuration" },
+	{ 0x0f, 0x01, 0x07, IPMI_EVENT_CLASS_DISCRETE, "System Firmware Hang", "PCI resource configuration" },
+	{ 0x0f, 0x01, 0x08, IPMI_EVENT_CLASS_DISCRETE, "System Firmware Hang", "Option ROM initialization" },
+	{ 0x0f, 0x01, 0x09, IPMI_EVENT_CLASS_DISCRETE, "System Firmware Hang", "Video initialization" },
+	{ 0x0f, 0x01, 0x0a, IPMI_EVENT_CLASS_DISCRETE, "System Firmware Hang", "Cache initialization" },
+	{ 0x0f, 0x01, 0x0b, IPMI_EVENT_CLASS_DISCRETE, "System Firmware Hang", "SMBus initialization" },
+	{ 0x0f, 0x01, 0x0c, IPMI_EVENT_CLASS_DISCRETE, "System Firmware Hang", "Keyboard controller initialization" },
+	{ 0x0f, 0x01, 0x0d, IPMI_EVENT_CLASS_DISCRETE, "System Firmware Hang", "Management controller initialization" },
+	{ 0x0f, 0x01, 0x0e, IPMI_EVENT_CLASS_DISCRETE, "System Firmware Hang", "Docking station attachment" },
+	{ 0x0f, 0x01, 0x0f, IPMI_EVENT_CLASS_DISCRETE, "System Firmware Hang", "Enabling docking station" },
+	{ 0x0f, 0x01, 0x10, IPMI_EVENT_CLASS_DISCRETE, "System Firmware Hang", "Docking station ejection" },
+	{ 0x0f, 0x01, 0x11, IPMI_EVENT_CLASS_DISCRETE, "System Firmware Hang", "Disabling docking station" },
+	{ 0x0f, 0x01, 0x12, IPMI_EVENT_CLASS_DISCRETE, "System Firmware Hang", "Calling operating system wake-up vector" },
+	{ 0x0f, 0x01, 0x13, IPMI_EVENT_CLASS_DISCRETE, "System Firmware Hang", "System boot initiated" },
+	{ 0x0f, 0x01, 0x14, IPMI_EVENT_CLASS_DISCRETE, "System Firmware Hang", "Motherboard initialization" },
+	{ 0x0f, 0x01, 0x15, IPMI_EVENT_CLASS_DISCRETE, "System Firmware Hang", "reserved" },
+	{ 0x0f, 0x01, 0x16, IPMI_EVENT_CLASS_DISCRETE, "System Firmware Hang", "Floppy initialization" },
+	{ 0x0f, 0x01, 0x17, IPMI_EVENT_CLASS_DISCRETE, "System Firmware Hang", "Keyboard test" },
+	{ 0x0f, 0x01, 0x18, IPMI_EVENT_CLASS_DISCRETE, "System Firmware Hang", "Pointing device test" },
+	{ 0x0f, 0x01, 0x19, IPMI_EVENT_CLASS_DISCRETE, "System Firmware Hang", "Primary CPU initialization" },
+	{ 0x0f, 0x01, 0xff, IPMI_EVENT_CLASS_DISCRETE, "System Firmware Hang", "Unknown Hang" },
 
-	{ 0x12, 0x00, IPMI_EVENT_CLASS_DISCRETE, "System Event", "System Reconfigured" },
-	{ 0x12, 0x01, IPMI_EVENT_CLASS_DISCRETE, "System Event", "OEM System boot event" },
-	{ 0x12, 0x02, IPMI_EVENT_CLASS_DISCRETE, "System Event", "Undetermined system hardware failure" },
-	{ 0x12, 0x03, IPMI_EVENT_CLASS_DISCRETE, "System Event", "Entry added to auxillary log" },
-	{ 0x12, 0x04, IPMI_EVENT_CLASS_DISCRETE, "System Event", "PEF Action" },
-	{ 0x12, 0x05, IPMI_EVENT_CLASS_DISCRETE, "System Event", "Timestamp Clock Sync." },
+	{ 0x0f, 0x02, 0x00, IPMI_EVENT_CLASS_DISCRETE, "System Firmware Progress", "Unspecified" },
+	{ 0x0f, 0x02, 0x01, IPMI_EVENT_CLASS_DISCRETE, "System Firmware Progress", "Memory initialization" },
+	{ 0x0f, 0x02, 0x02, IPMI_EVENT_CLASS_DISCRETE, "System Firmware Progress", "Hard-disk initialization" },
+	{ 0x0f, 0x02, 0x03, IPMI_EVENT_CLASS_DISCRETE, "System Firmware Progress", "Secondary CPU Initialization" },
+	{ 0x0f, 0x02, 0x04, IPMI_EVENT_CLASS_DISCRETE, "System Firmware Progress", "User authentication" },
+	{ 0x0f, 0x02, 0x05, IPMI_EVENT_CLASS_DISCRETE, "System Firmware Progress", "User-initiated system setup" },
+	{ 0x0f, 0x02, 0x06, IPMI_EVENT_CLASS_DISCRETE, "System Firmware Progress", "USB resource configuration" },
+	{ 0x0f, 0x02, 0x07, IPMI_EVENT_CLASS_DISCRETE, "System Firmware Progress", "PCI resource configuration" },
+	{ 0x0f, 0x02, 0x08, IPMI_EVENT_CLASS_DISCRETE, "System Firmware Progress", "Option ROM initialization" },
+	{ 0x0f, 0x02, 0x09, IPMI_EVENT_CLASS_DISCRETE, "System Firmware Progress", "Video initialization" },
+	{ 0x0f, 0x02, 0x0a, IPMI_EVENT_CLASS_DISCRETE, "System Firmware Progress", "Cache initialization" },
+	{ 0x0f, 0x02, 0x0b, IPMI_EVENT_CLASS_DISCRETE, "System Firmware Progress", "SMBus initialization" },
+	{ 0x0f, 0x02, 0x0c, IPMI_EVENT_CLASS_DISCRETE, "System Firmware Progress", "Keyboard controller initialization" },
+	{ 0x0f, 0x02, 0x0d, IPMI_EVENT_CLASS_DISCRETE, "System Firmware Progress", "Management controller initialization" },
+	{ 0x0f, 0x02, 0x0e, IPMI_EVENT_CLASS_DISCRETE, "System Firmware Progress", "Docking station attachment" },
+	{ 0x0f, 0x02, 0x0f, IPMI_EVENT_CLASS_DISCRETE, "System Firmware Progress", "Enabling docking station" },
+	{ 0x0f, 0x02, 0x10, IPMI_EVENT_CLASS_DISCRETE, "System Firmware Progress", "Docking station ejection" },
+	{ 0x0f, 0x02, 0x11, IPMI_EVENT_CLASS_DISCRETE, "System Firmware Progress", "Disabling docking station" },
+	{ 0x0f, 0x02, 0x12, IPMI_EVENT_CLASS_DISCRETE, "System Firmware Progress", "Calling operating system wake-up vector" },
+	{ 0x0f, 0x02, 0x13, IPMI_EVENT_CLASS_DISCRETE, "System Firmware Progress", "System boot initiated" },
+	{ 0x0f, 0x02, 0x14, IPMI_EVENT_CLASS_DISCRETE, "System Firmware Progress", "Motherboard initialization" },
+	{ 0x0f, 0x02, 0x15, IPMI_EVENT_CLASS_DISCRETE, "System Firmware Progress", "reserved" },
+	{ 0x0f, 0x02, 0x16, IPMI_EVENT_CLASS_DISCRETE, "System Firmware Progress", "Floppy initialization" },
+	{ 0x0f, 0x02, 0x17, IPMI_EVENT_CLASS_DISCRETE, "System Firmware Progress", "Keyboard test" },
+	{ 0x0f, 0x02, 0x18, IPMI_EVENT_CLASS_DISCRETE, "System Firmware Progress", "Pointing device test" },
+	{ 0x0f, 0x02, 0x19, IPMI_EVENT_CLASS_DISCRETE, "System Firmware Progress", "Primary CPU initialization" },
+	{ 0x0f, 0x02, 0xff, IPMI_EVENT_CLASS_DISCRETE, "System Firmware Progress", "Unknown Progress" },
 
-	{ 0x13, 0x00, IPMI_EVENT_CLASS_DISCRETE, "Critical Interrupt", "Front Panel NMI" },
-	{ 0x13, 0x01, IPMI_EVENT_CLASS_DISCRETE, "Critical Interrupt", "Bus Timeout" },
-	{ 0x13, 0x02, IPMI_EVENT_CLASS_DISCRETE, "Critical Interrupt", "I/O Channel check NMI" },
-	{ 0x13, 0x03, IPMI_EVENT_CLASS_DISCRETE, "Critical Interrupt", "Software NMI" },
-	{ 0x13, 0x04, IPMI_EVENT_CLASS_DISCRETE, "Critical Interrupt", "PCI PERR" },
-	{ 0x13, 0x05, IPMI_EVENT_CLASS_DISCRETE, "Critical Interrupt", "PCI SERR" },
-	{ 0x13, 0x06, IPMI_EVENT_CLASS_DISCRETE, "Critical Interrupt", "EISA failsafe timeout" },
-	{ 0x13, 0x07, IPMI_EVENT_CLASS_DISCRETE, "Critical Interrupt", "Bus Correctable error" },
-	{ 0x13, 0x08, IPMI_EVENT_CLASS_DISCRETE, "Critical Interrupt", "Bus Uncorrectable error" },
-	{ 0x13, 0x09, IPMI_EVENT_CLASS_DISCRETE, "Critical Interrupt", "Fatal NMI" },
+	{ 0x10, 0x00, 0xff, IPMI_EVENT_CLASS_DISCRETE, "Event Logging Disabled", "Correctable memory error logging disabled" },
+	{ 0x10, 0x01, 0xff, IPMI_EVENT_CLASS_DISCRETE, "Event Logging Disabled", "Event logging disabled" },
+	{ 0x10, 0x02, 0xff, IPMI_EVENT_CLASS_DISCRETE, "Event Logging Disabled", "Log area reset/cleared" },
+	{ 0x10, 0x03, 0xff, IPMI_EVENT_CLASS_DISCRETE, "Event Logging Disabled", "All event logging disabled" },
+	{ 0x10, 0x04, 0xff, IPMI_EVENT_CLASS_DISCRETE, "Event Logging Disabled", "Log full" },
+	{ 0x10, 0x05, 0xff, IPMI_EVENT_CLASS_DISCRETE, "Event Logging Disabled", "Log almost full" },
 
-	{ 0x14, 0x00, IPMI_EVENT_CLASS_DISCRETE, "Button", "Power Button pressed" },
-	{ 0x14, 0x01, IPMI_EVENT_CLASS_DISCRETE, "Button", "Sleep Button pressed" },
-	{ 0x14, 0x02, IPMI_EVENT_CLASS_DISCRETE, "Button", "Reset Button pressed" },
+	{ 0x11, 0x00, 0xff, IPMI_EVENT_CLASS_DISCRETE, "Watchdog 1", "BIOS Reset" },
+	{ 0x11, 0x01, 0xff, IPMI_EVENT_CLASS_DISCRETE, "Watchdog 1", "OS Reset" },
+	{ 0x11, 0x02, 0xff, IPMI_EVENT_CLASS_DISCRETE, "Watchdog 1", "OS Shut Down" },
+	{ 0x11, 0x03, 0xff, IPMI_EVENT_CLASS_DISCRETE, "Watchdog 1", "OS Power Down" },
+	{ 0x11, 0x04, 0xff, IPMI_EVENT_CLASS_DISCRETE, "Watchdog 1", "OS Power Cycle" },
+	{ 0x11, 0x05, 0xff, IPMI_EVENT_CLASS_DISCRETE, "Watchdog 1", "OS NMI/Diag Interrupt" },
+	{ 0x11, 0x06, 0xff, IPMI_EVENT_CLASS_DISCRETE, "Watchdog 1", "OS Expired" },
+	{ 0x11, 0x07, 0xff, IPMI_EVENT_CLASS_DISCRETE, "Watchdog 1", "OS pre-timeout Interrupt" },
 
-	{ 0x15, 0x00, IPMI_EVENT_CLASS_DISCRETE, "Module/Board", NULL },
-	{ 0x16, 0x00, IPMI_EVENT_CLASS_DISCRETE, "Microcontroller/Coprocessor", NULL },
-	{ 0x17, 0x00, IPMI_EVENT_CLASS_DISCRETE, "Add-in Card", NULL },
-	{ 0x18, 0x00, IPMI_EVENT_CLASS_DISCRETE, "Chassis", NULL },
-	{ 0x19, 0x00, IPMI_EVENT_CLASS_DISCRETE, "Chip Set", NULL },
-	{ 0x1a, 0x00, IPMI_EVENT_CLASS_DISCRETE, "Other FRU", NULL },
-	{ 0x1b, 0x00, IPMI_EVENT_CLASS_DISCRETE, "Cable/Interconnect", NULL },
-	{ 0x1c, 0x00, IPMI_EVENT_CLASS_DISCRETE, "Terminator", NULL },
+	{ 0x12, 0x00, 0xff, IPMI_EVENT_CLASS_DISCRETE, "System Event", "System Reconfigured" },
+	{ 0x12, 0x01, 0xff, IPMI_EVENT_CLASS_DISCRETE, "System Event", "OEM System boot event" },
+	{ 0x12, 0x02, 0xff, IPMI_EVENT_CLASS_DISCRETE, "System Event", "Undetermined system hardware failure" },
+	{ 0x12, 0x03, 0xff, IPMI_EVENT_CLASS_DISCRETE, "System Event", "Entry added to auxiliary log" },
+	{ 0x12, 0x04, 0xff, IPMI_EVENT_CLASS_DISCRETE, "System Event", "PEF Action" },
+	{ 0x12, 0x05, 0xff, IPMI_EVENT_CLASS_DISCRETE, "System Event", "Timestamp Clock Sync" },
 
-	{ 0x1d, 0x00, IPMI_EVENT_CLASS_DISCRETE, "System Boot Initiated", "Initiated by power up" },
-	{ 0x1d, 0x01, IPMI_EVENT_CLASS_DISCRETE, "System Boot Initiated", "Initiated by hard reset" },
-	{ 0x1d, 0x02, IPMI_EVENT_CLASS_DISCRETE, "System Boot Initiated", "Initiated by warm reset" },
-	{ 0x1d, 0x03, IPMI_EVENT_CLASS_DISCRETE, "System Boot Initiated", "User requested PXE boot" },
-	{ 0x1d, 0x04, IPMI_EVENT_CLASS_DISCRETE, "System Boot Initiated", "Automatic boot to diagnostic" },
+	{ 0x13, 0x00, 0xff, IPMI_EVENT_CLASS_DISCRETE, "Critical Interrupt", "NMI/Diag Interrupt" },
+	{ 0x13, 0x01, 0xff, IPMI_EVENT_CLASS_DISCRETE, "Critical Interrupt", "Bus Timeout" },
+	{ 0x13, 0x02, 0xff, IPMI_EVENT_CLASS_DISCRETE, "Critical Interrupt", "I/O Channel check NMI" },
+	{ 0x13, 0x03, 0xff, IPMI_EVENT_CLASS_DISCRETE, "Critical Interrupt", "Software NMI" },
+	{ 0x13, 0x04, 0xff, IPMI_EVENT_CLASS_DISCRETE, "Critical Interrupt", "PCI PERR" },
+	{ 0x13, 0x05, 0xff, IPMI_EVENT_CLASS_DISCRETE, "Critical Interrupt", "PCI SERR" },
+	{ 0x13, 0x06, 0xff, IPMI_EVENT_CLASS_DISCRETE, "Critical Interrupt", "EISA failsafe timeout" },
+	{ 0x13, 0x07, 0xff, IPMI_EVENT_CLASS_DISCRETE, "Critical Interrupt", "Bus Correctable error" },
+	{ 0x13, 0x08, 0xff, IPMI_EVENT_CLASS_DISCRETE, "Critical Interrupt", "Bus Uncorrectable error" },
+	{ 0x13, 0x09, 0xff, IPMI_EVENT_CLASS_DISCRETE, "Critical Interrupt", "Fatal NMI" },
+	{ 0x13, 0x0a, 0xff, IPMI_EVENT_CLASS_DISCRETE, "Critical Interrupt", "Bus Fatal Error" },
 
-	{ 0x1e, 0x00, IPMI_EVENT_CLASS_DISCRETE, "Boot Error", "No bootable media" },
-	{ 0x1e, 0x01, IPMI_EVENT_CLASS_DISCRETE, "Boot Error", "Non-bootable disk in drive" },
-	{ 0x1e, 0x02, IPMI_EVENT_CLASS_DISCRETE, "Boot Error", "PXE server not found" },
-	{ 0x1e, 0x03, IPMI_EVENT_CLASS_DISCRETE, "Boot Error", "Invalid boot sector" },
-	{ 0x1e, 0x04, IPMI_EVENT_CLASS_DISCRETE, "Boot Error", "Timeout waiting for selection" },
+	{ 0x14, 0x00, 0xff, IPMI_EVENT_CLASS_DISCRETE, "Button", "Power Button pressed" },
+	{ 0x14, 0x01, 0xff, IPMI_EVENT_CLASS_DISCRETE, "Button", "Sleep Button pressed" },
+	{ 0x14, 0x02, 0xff, IPMI_EVENT_CLASS_DISCRETE, "Button", "Reset Button pressed" },
+	{ 0x14, 0x03, 0xff, IPMI_EVENT_CLASS_DISCRETE, "Button", "FRU Latch" },
+	{ 0x14, 0x04, 0xff, IPMI_EVENT_CLASS_DISCRETE, "Button", "FRU Service" },
 
-	{ 0x1f, 0x00, IPMI_EVENT_CLASS_DISCRETE, "OS Boot", "A: boot completed" },
-	{ 0x1f, 0x01, IPMI_EVENT_CLASS_DISCRETE, "OS Boot", "C: boot completed" },
-	{ 0x1f, 0x02, IPMI_EVENT_CLASS_DISCRETE, "OS Boot", "PXE boot completed" },
-	{ 0x1f, 0x03, IPMI_EVENT_CLASS_DISCRETE, "OS Boot", "Diagnostic boot completed" },
-	{ 0x1f, 0x04, IPMI_EVENT_CLASS_DISCRETE, "OS Boot", "CD-ROM boot completed" },
-	{ 0x1f, 0x05, IPMI_EVENT_CLASS_DISCRETE, "OS Boot", "ROM boot completed" },
-	{ 0x1f, 0x06, IPMI_EVENT_CLASS_DISCRETE, "OS Boot", "boot completed - device not specified" },
+	{ 0x15, 0x00, 0xff, IPMI_EVENT_CLASS_DISCRETE, "Module/Board", NULL },
+	{ 0x16, 0x00, 0xff, IPMI_EVENT_CLASS_DISCRETE, "Microcontroller/Coprocessor", NULL },
+	{ 0x17, 0x00, 0xff, IPMI_EVENT_CLASS_DISCRETE, "Add-in Card", NULL },
+	{ 0x18, 0x00, 0xff, IPMI_EVENT_CLASS_DISCRETE, "Chassis", NULL },
+	{ 0x19, 0x00, 0xff, IPMI_EVENT_CLASS_DISCRETE, "Chip Set", NULL },
+	{ 0x1a, 0x00, 0xff, IPMI_EVENT_CLASS_DISCRETE, "Other FRU", NULL },
 
-	{ 0x20, 0x00, IPMI_EVENT_CLASS_DISCRETE, "OS Critical Stop", "Stop during OS load/init" },
-	{ 0x20, 0x01, IPMI_EVENT_CLASS_DISCRETE, "OS Critical Stop", "Run-time stop" },
+	{ 0x1b, 0x00, 0xff, IPMI_EVENT_CLASS_DISCRETE, "Cable/Interconnect", "Connected" },
+	{ 0x1b, 0x01, 0xff, IPMI_EVENT_CLASS_DISCRETE, "Cable/Interconnect", "Config Error" },
 
-	{ 0x21, 0x00, IPMI_EVENT_CLASS_DISCRETE, "Slot/Connector", "Fault Status asserted" },
-	{ 0x21, 0x01, IPMI_EVENT_CLASS_DISCRETE, "Slot/Connector", "Identify Status asserted" },
-	{ 0x21, 0x02, IPMI_EVENT_CLASS_DISCRETE, "Slot/Connector", "Slot/Connector Device installed/attached" },
-	{ 0x21, 0x03, IPMI_EVENT_CLASS_DISCRETE, "Slot/Connector", "Slot/Connector ready for device installation" },
-	{ 0x21, 0x04, IPMI_EVENT_CLASS_DISCRETE, "Slot/Connector", "Slot/Connector ready for device removal" },
-	{ 0x21, 0x05, IPMI_EVENT_CLASS_DISCRETE, "Slot/Connector", "Slot Power is off" },
-	{ 0x21, 0x06, IPMI_EVENT_CLASS_DISCRETE, "Slot/Connector", "Slot/Connector device removal request" },
-	{ 0x21, 0x07, IPMI_EVENT_CLASS_DISCRETE, "Slot/Connector", "Interlock asserted" },
-	{ 0x21, 0x08, IPMI_EVENT_CLASS_DISCRETE, "Slot/Connector", "Slot is disabled" },
+	{ 0x1c, 0x00, 0xff, IPMI_EVENT_CLASS_DISCRETE, "Terminator", NULL },
 
-	{ 0x22, 0x00, IPMI_EVENT_CLASS_DISCRETE, "System ACPI Power State", "S0/G0: working" },
-	{ 0x22, 0x01, IPMI_EVENT_CLASS_DISCRETE, "System ACPI Power State", "S1: sleeping with system hw & processor context maintained" },
-	{ 0x22, 0x02, IPMI_EVENT_CLASS_DISCRETE, "System ACPI Power State", "S2: sleeping, processor context lost" },
-	{ 0x22, 0x03, IPMI_EVENT_CLASS_DISCRETE, "System ACPI Power State", "S3: sleeping, processor & hw context lost, memory retained" },
-	{ 0x22, 0x04, IPMI_EVENT_CLASS_DISCRETE, "System ACPI Power State", "S4: non-volatile sleep/suspend-to-disk" },
-	{ 0x22, 0x05, IPMI_EVENT_CLASS_DISCRETE, "System ACPI Power State", "S5/G2: soft-off" },
-	{ 0x22, 0x06, IPMI_EVENT_CLASS_DISCRETE, "System ACPI Power State", "S4/S5: soft-off" },
-	{ 0x22, 0x07, IPMI_EVENT_CLASS_DISCRETE, "System ACPI Power State", "G3: mechanical off" },
-	{ 0x22, 0x08, IPMI_EVENT_CLASS_DISCRETE, "System ACPI Power State", "Sleeping in S1/S2/S3 state" },
-	{ 0x22, 0x09, IPMI_EVENT_CLASS_DISCRETE, "System ACPI Power State", "G1: sleeping" },
-	{ 0x22, 0x0a, IPMI_EVENT_CLASS_DISCRETE, "System ACPI Power State", "S5: entered by override" },
-	{ 0x22, 0x0b, IPMI_EVENT_CLASS_DISCRETE, "System ACPI Power State", "Legacy ON state" },
-	{ 0x22, 0x0c, IPMI_EVENT_CLASS_DISCRETE, "System ACPI Power State", "Legacy OFF state" },
-	{ 0x22, 0x0e, IPMI_EVENT_CLASS_DISCRETE, "System ACPI Power State", "Unknown" },
+	{ 0x1d, 0x00, 0xff, IPMI_EVENT_CLASS_DISCRETE, "System Boot Initiated", "Initiated by power up" },
+	{ 0x1d, 0x01, 0xff, IPMI_EVENT_CLASS_DISCRETE, "System Boot Initiated", "Initiated by hard reset" },
+	{ 0x1d, 0x02, 0xff, IPMI_EVENT_CLASS_DISCRETE, "System Boot Initiated", "Initiated by warm reset" },
+	{ 0x1d, 0x03, 0xff, IPMI_EVENT_CLASS_DISCRETE, "System Boot Initiated", "User requested PXE boot" },
+	{ 0x1d, 0x04, 0xff, IPMI_EVENT_CLASS_DISCRETE, "System Boot Initiated", "Automatic boot to diagnostic" },
+	{ 0x1d, 0x05, 0xff, IPMI_EVENT_CLASS_DISCRETE, "System Boot Initiated", "OS initiated hard reset" },
+	{ 0x1d, 0x06, 0xff, IPMI_EVENT_CLASS_DISCRETE, "System Boot Initiated", "OS initiated warm reset" },
+	{ 0x1d, 0x07, 0xff, IPMI_EVENT_CLASS_DISCRETE, "System Boot Initiated", "System Restart" },
 
-	{ 0x23, 0x00, IPMI_EVENT_CLASS_DISCRETE, "Watchdog 2", "Timer expired" },
-	{ 0x23, 0x01, IPMI_EVENT_CLASS_DISCRETE, "Watchdog 2", "Hard reset" },
-	{ 0x23, 0x02, IPMI_EVENT_CLASS_DISCRETE, "Watchdog 2", "Power down" },
-	{ 0x23, 0x03, IPMI_EVENT_CLASS_DISCRETE, "Watchdog 2", "Power cycle" },
-	{ 0x23, 0x04, IPMI_EVENT_CLASS_DISCRETE, "Watchdog 2", "reserved" },
-	{ 0x23, 0x05, IPMI_EVENT_CLASS_DISCRETE, "Watchdog 2", "reserved" },
-	{ 0x23, 0x06, IPMI_EVENT_CLASS_DISCRETE, "Watchdog 2", "reserved" },
-	{ 0x23, 0x07, IPMI_EVENT_CLASS_DISCRETE, "Watchdog 2", "reserved" },
-	{ 0x23, 0x08, IPMI_EVENT_CLASS_DISCRETE, "Watchdog 2", "Timer interrupt" },
+	{ 0x1e, 0x00, 0xff, IPMI_EVENT_CLASS_DISCRETE, "Boot Error", "No bootable media" },
+	{ 0x1e, 0x01, 0xff, IPMI_EVENT_CLASS_DISCRETE, "Boot Error", "Non-bootable disk in drive" },
+	{ 0x1e, 0x02, 0xff, IPMI_EVENT_CLASS_DISCRETE, "Boot Error", "PXE server not found" },
+	{ 0x1e, 0x03, 0xff, IPMI_EVENT_CLASS_DISCRETE, "Boot Error", "Invalid boot sector" },
+	{ 0x1e, 0x04, 0xff, IPMI_EVENT_CLASS_DISCRETE, "Boot Error", "Timeout waiting for selection" },
 
-	{ 0x24, 0x00, IPMI_EVENT_CLASS_DISCRETE, "Platform Alert", "Platform generated page" },
-	{ 0x24, 0x01, IPMI_EVENT_CLASS_DISCRETE, "Platform Alert", "Platform generated LAN alert" },
-	{ 0x24, 0x02, IPMI_EVENT_CLASS_DISCRETE, "Platform Alert", "Platform Event Trap generated" },
-	{ 0x24, 0x03, IPMI_EVENT_CLASS_DISCRETE, "Platform Alert", "Platform generated SNMP trap, OEM format" },
+	{ 0x1f, 0x00, 0xff, IPMI_EVENT_CLASS_DISCRETE, "OS Boot", "A: boot completed" },
+	{ 0x1f, 0x01, 0xff, IPMI_EVENT_CLASS_DISCRETE, "OS Boot", "C: boot completed" },
+	{ 0x1f, 0x02, 0xff, IPMI_EVENT_CLASS_DISCRETE, "OS Boot", "PXE boot completed" },
+	{ 0x1f, 0x03, 0xff, IPMI_EVENT_CLASS_DISCRETE, "OS Boot", "Diagnostic boot completed" },
+	{ 0x1f, 0x04, 0xff, IPMI_EVENT_CLASS_DISCRETE, "OS Boot", "CD-ROM boot completed" },
+	{ 0x1f, 0x05, 0xff, IPMI_EVENT_CLASS_DISCRETE, "OS Boot", "ROM boot completed" },
+	{ 0x1f, 0x06, 0xff, IPMI_EVENT_CLASS_DISCRETE, "OS Boot", "boot completed - device not specified" },
 
-	{ 0x25, 0x00, IPMI_EVENT_CLASS_DISCRETE, "Entity Presence", "Present" },
-	{ 0x25, 0x01, IPMI_EVENT_CLASS_DISCRETE, "Entity Presence", "Absent" },
-	{ 0x25, 0x02, IPMI_EVENT_CLASS_DISCRETE, "Entity Presence", "Disabled" },
+	{ 0x20, 0x00, 0xff, IPMI_EVENT_CLASS_DISCRETE, "OS Stop/Shutdown", "Error during system startup" },
+	{ 0x20, 0x01, 0xff, IPMI_EVENT_CLASS_DISCRETE, "OS Stop/Shutdown", "Run-time critical stop" },
+	{ 0x20, 0x02, 0xff, IPMI_EVENT_CLASS_DISCRETE, "OS Stop/Shutdown", "OS graceful stop" },
+	{ 0x20, 0x03, 0xff, IPMI_EVENT_CLASS_DISCRETE, "OS Stop/Shutdown", "OS graceful shutdown" },
+	{ 0x20, 0x04, 0xff, IPMI_EVENT_CLASS_DISCRETE, "OS Stop/Shutdown", "PEF initiated soft shutdown" },
+	{ 0x20, 0x05, 0xff, IPMI_EVENT_CLASS_DISCRETE, "OS Stop/Shutdown", "Agent not responding" },
 
-	{ 0x26, 0x00, IPMI_EVENT_CLASS_DISCRETE, "Monitor ASIC/IC", NULL },
+	{ 0x21, 0x00, 0xff, IPMI_EVENT_CLASS_DISCRETE, "Slot/Connector", "Fault Status" },
+	{ 0x21, 0x01, 0xff, IPMI_EVENT_CLASS_DISCRETE, "Slot/Connector", "Identify Status" },
+	{ 0x21, 0x02, 0xff, IPMI_EVENT_CLASS_DISCRETE, "Slot/Connector", "Device Installed" },
+	{ 0x21, 0x03, 0xff, IPMI_EVENT_CLASS_DISCRETE, "Slot/Connector", "Ready for Device Installation" },
+	{ 0x21, 0x04, 0xff, IPMI_EVENT_CLASS_DISCRETE, "Slot/Connector", "Ready for Device Removal" },
+	{ 0x21, 0x05, 0xff, IPMI_EVENT_CLASS_DISCRETE, "Slot/Connector", "Slot Power is Off" },
+	{ 0x21, 0x06, 0xff, IPMI_EVENT_CLASS_DISCRETE, "Slot/Connector", "Device Removal Request" },
+	{ 0x21, 0x07, 0xff, IPMI_EVENT_CLASS_DISCRETE, "Slot/Connector", "Interlock" },
+	{ 0x21, 0x08, 0xff, IPMI_EVENT_CLASS_DISCRETE, "Slot/Connector", "Slot is Disabled" },
+	{ 0x21, 0x09, 0xff, IPMI_EVENT_CLASS_DISCRETE, "Slot/Connector", "Spare Device" },
 
-	{ 0x27, 0x00, IPMI_EVENT_CLASS_DISCRETE, "LAN", "Heartbeat Lost" },
-	{ 0x27, 0x01, IPMI_EVENT_CLASS_DISCRETE, "LAN", "Heartbeat" },
+	{ 0x22, 0x00, 0xff, IPMI_EVENT_CLASS_DISCRETE, "System ACPI Power State", "S0/G0: working" },
+	{ 0x22, 0x01, 0xff, IPMI_EVENT_CLASS_DISCRETE, "System ACPI Power State", "S1: sleeping with system hw & processor context maintained" },
+	{ 0x22, 0x02, 0xff, IPMI_EVENT_CLASS_DISCRETE, "System ACPI Power State", "S2: sleeping, processor context lost" },
+	{ 0x22, 0x03, 0xff, IPMI_EVENT_CLASS_DISCRETE, "System ACPI Power State", "S3: sleeping, processor & hw context lost, memory retained" },
+	{ 0x22, 0x04, 0xff, IPMI_EVENT_CLASS_DISCRETE, "System ACPI Power State", "S4: non-volatile sleep/suspend-to-disk" },
+	{ 0x22, 0x05, 0xff, IPMI_EVENT_CLASS_DISCRETE, "System ACPI Power State", "S5/G2: soft-off" },
+	{ 0x22, 0x06, 0xff, IPMI_EVENT_CLASS_DISCRETE, "System ACPI Power State", "S4/S5: soft-off" },
+	{ 0x22, 0x07, 0xff, IPMI_EVENT_CLASS_DISCRETE, "System ACPI Power State", "G3: mechanical off" },
+	{ 0x22, 0x08, 0xff, IPMI_EVENT_CLASS_DISCRETE, "System ACPI Power State", "Sleeping in S1/S2/S3 state" },
+	{ 0x22, 0x09, 0xff, IPMI_EVENT_CLASS_DISCRETE, "System ACPI Power State", "G1: sleeping" },
+	{ 0x22, 0x0a, 0xff, IPMI_EVENT_CLASS_DISCRETE, "System ACPI Power State", "S5: entered by override" },
+	{ 0x22, 0x0b, 0xff, IPMI_EVENT_CLASS_DISCRETE, "System ACPI Power State", "Legacy ON state" },
+	{ 0x22, 0x0c, 0xff, IPMI_EVENT_CLASS_DISCRETE, "System ACPI Power State", "Legacy OFF state" },
+	{ 0x22, 0x0e, 0xff, IPMI_EVENT_CLASS_DISCRETE, "System ACPI Power State", "Unknown" },
 
-	{ 0x28, 0x00, IPMI_EVENT_CLASS_DISCRETE, "Management Subsystem Health", "Sensor access degraded or unavailable" },
-	{ 0x28, 0x01, IPMI_EVENT_CLASS_DISCRETE, "Management Subsystem Health", "Controller access degraded or unavailable" },
-	{ 0x28, 0x02, IPMI_EVENT_CLASS_DISCRETE, "Management Subsystem Health", "Management controller off-line" },
-	{ 0x28, 0x03, IPMI_EVENT_CLASS_DISCRETE, "Management Subsystem Health", "Management controller unavailable" },
+	{ 0x23, 0x00, 0xff, IPMI_EVENT_CLASS_DISCRETE, "Watchdog 2", "Timer expired" },
+	{ 0x23, 0x01, 0xff, IPMI_EVENT_CLASS_DISCRETE, "Watchdog 2", "Hard reset" },
+	{ 0x23, 0x02, 0xff, IPMI_EVENT_CLASS_DISCRETE, "Watchdog 2", "Power down" },
+	{ 0x23, 0x03, 0xff, IPMI_EVENT_CLASS_DISCRETE, "Watchdog 2", "Power cycle" },
+	{ 0x23, 0x04, 0xff, IPMI_EVENT_CLASS_DISCRETE, "Watchdog 2", "reserved" },
+	{ 0x23, 0x05, 0xff, IPMI_EVENT_CLASS_DISCRETE, "Watchdog 2", "reserved" },
+	{ 0x23, 0x06, 0xff, IPMI_EVENT_CLASS_DISCRETE, "Watchdog 2", "reserved" },
+	{ 0x23, 0x07, 0xff, IPMI_EVENT_CLASS_DISCRETE, "Watchdog 2", "reserved" },
+	{ 0x23, 0x08, 0xff, IPMI_EVENT_CLASS_DISCRETE, "Watchdog 2", "Timer interrupt" },
 
-	{ 0x29, 0x00, IPMI_EVENT_CLASS_DISCRETE, "Battery", "Low" },
-	{ 0x29, 0x01, IPMI_EVENT_CLASS_DISCRETE, "Battery", "Failed" },
-	{ 0x29, 0x02, IPMI_EVENT_CLASS_DISCRETE, "Battery", "Presence Detected" },
+	{ 0x24, 0x00, 0xff, IPMI_EVENT_CLASS_DISCRETE, "Platform Alert", "Platform generated page" },
+	{ 0x24, 0x01, 0xff, IPMI_EVENT_CLASS_DISCRETE, "Platform Alert", "Platform generated LAN alert" },
+	{ 0x24, 0x02, 0xff, IPMI_EVENT_CLASS_DISCRETE, "Platform Alert", "Platform Event Trap generated" },
+	{ 0x24, 0x03, 0xff, IPMI_EVENT_CLASS_DISCRETE, "Platform Alert", "Platform generated SNMP trap, OEM format" },
 
-	{ 0x00, 0x00, 0x00, NULL, NULL },
+	{ 0x25, 0x00, 0xff, IPMI_EVENT_CLASS_DISCRETE, "Entity Presence", "Present" },
+	{ 0x25, 0x01, 0xff, IPMI_EVENT_CLASS_DISCRETE, "Entity Presence", "Absent" },
+	{ 0x25, 0x02, 0xff, IPMI_EVENT_CLASS_DISCRETE, "Entity Presence", "Disabled" },
+
+	{ 0x26, 0x00, 0xff, IPMI_EVENT_CLASS_DISCRETE, "Monitor ASIC/IC", NULL },
+
+	{ 0x27, 0x00, 0xff, IPMI_EVENT_CLASS_DISCRETE, "LAN", "Heartbeat Lost" },
+	{ 0x27, 0x01, 0xff, IPMI_EVENT_CLASS_DISCRETE, "LAN", "Heartbeat" },
+
+	{ 0x28, 0x00, 0xff, IPMI_EVENT_CLASS_DISCRETE, "Management Subsystem Health", "Sensor access degraded or unavailable" },
+	{ 0x28, 0x01, 0xff, IPMI_EVENT_CLASS_DISCRETE, "Management Subsystem Health", "Controller access degraded or unavailable" },
+	{ 0x28, 0x02, 0xff, IPMI_EVENT_CLASS_DISCRETE, "Management Subsystem Health", "Management controller off-line" },
+	{ 0x28, 0x03, 0xff, IPMI_EVENT_CLASS_DISCRETE, "Management Subsystem Health", "Management controller unavailable" },
+	{ 0x28, 0x04, 0xff, IPMI_EVENT_CLASS_DISCRETE, "Management Subsystem Health", "Sensor failure" },
+	{ 0x28, 0x05, 0xff, IPMI_EVENT_CLASS_DISCRETE, "Management Subsystem Health", "FRU failure" },
+
+	{ 0x29, 0x00, 0xff, IPMI_EVENT_CLASS_DISCRETE, "Battery", "Low" },
+	{ 0x29, 0x01, 0xff, IPMI_EVENT_CLASS_DISCRETE, "Battery", "Failed" },
+	{ 0x29, 0x02, 0xff, IPMI_EVENT_CLASS_DISCRETE, "Battery", "Presence Detected" },
+
+	{ 0x2b, 0x00, 0xff, IPMI_EVENT_CLASS_DISCRETE, "Version Change", "Hardware change detected" },
+	{ 0x2b, 0x01, 0xff, IPMI_EVENT_CLASS_DISCRETE, "Version Change", "Firmware or software change detected" },
+	{ 0x2b, 0x02, 0xff, IPMI_EVENT_CLASS_DISCRETE, "Version Change", "Hardware incompatibility detected" },
+	{ 0x2b, 0x03, 0xff, IPMI_EVENT_CLASS_DISCRETE, "Version Change", "Firmware or software incompatibility detected" },
+	{ 0x2b, 0x04, 0xff, IPMI_EVENT_CLASS_DISCRETE, "Version Change", "Invalid or unsupported hardware version" },
+	{ 0x2b, 0x05, 0xff, IPMI_EVENT_CLASS_DISCRETE, "Version Change", "Invalid or unsupported firmware or software version" },
+	{ 0x2b, 0x06, 0xff, IPMI_EVENT_CLASS_DISCRETE, "Version Change", "Hardware change success" },
+	{ 0x2b, 0x07, 0xff, IPMI_EVENT_CLASS_DISCRETE, "Version Change", "Firmware or software change success" },
+
+	{ 0x2c, 0x00, 0xff, IPMI_EVENT_CLASS_DISCRETE, "FRU State", "Not Installed" },
+	{ 0x2c, 0x01, 0xff, IPMI_EVENT_CLASS_DISCRETE, "FRU State", "Inactive" },
+	{ 0x2c, 0x02, 0xff, IPMI_EVENT_CLASS_DISCRETE, "FRU State", "Activation Requested" },
+	{ 0x2c, 0x03, 0xff, IPMI_EVENT_CLASS_DISCRETE, "FRU State", "Activation in Progress" },
+	{ 0x2c, 0x04, 0xff, IPMI_EVENT_CLASS_DISCRETE, "FRU State", "Active" },
+	{ 0x2c, 0x05, 0xff, IPMI_EVENT_CLASS_DISCRETE, "FRU State", "Deactivation Requested" },
+	{ 0x2c, 0x06, 0xff, IPMI_EVENT_CLASS_DISCRETE, "FRU State", "Deactivation in Progress" },
+	{ 0x2c, 0x07, 0xff, IPMI_EVENT_CLASS_DISCRETE, "FRU State", "Communication lost" },
+
+ 	{ 0xF0, 0x00, 0xFF, IPMI_EVENT_CLASS_DISCRETE, "FRU Hot Swap", "Transition to M0" },
+ 	{ 0xF0, 0x01, 0xFF, IPMI_EVENT_CLASS_DISCRETE, "FRU Hot Swap", "Transition to M1" },
+ 	{ 0xF0, 0x02, 0xFF, IPMI_EVENT_CLASS_DISCRETE, "FRU Hot Swap", "Transition to M2" },
+ 	{ 0xF0, 0x03, 0xFF, IPMI_EVENT_CLASS_DISCRETE, "FRU Hot Swap", "Transition to M3" },
+ 	{ 0xF0, 0x04, 0xFF, IPMI_EVENT_CLASS_DISCRETE, "FRU Hot Swap", "Transition to M4" },
+ 	{ 0xF0, 0x05, 0xFF, IPMI_EVENT_CLASS_DISCRETE, "FRU Hot Swap", "Transition to M5" },
+ 	{ 0xF0, 0x06, 0xFF, IPMI_EVENT_CLASS_DISCRETE, "FRU Hot Swap", "Transition to M6" },
+ 	{ 0xF0, 0x06, 0xFF, IPMI_EVENT_CLASS_DISCRETE, "FRU Hot Swap", "Transition to M7" },
+ 
+ 	{ 0xF1, 0x00, 0xff, IPMI_EVENT_CLASS_DISCRETE, "IPMB-0 Status", "IPMB-A disabled, IPMB-B disabled" },
+ 	{ 0xF1, 0x01, 0xff, IPMI_EVENT_CLASS_DISCRETE, "IPMB-0 Status", "IPMB-A enabled, IPMB-B disabled" },
+ 	{ 0xF1, 0x02, 0xff, IPMI_EVENT_CLASS_DISCRETE, "IPMB-0 Status", "IPMB-A disabled, IPMB-B enabled" },
+ 	{ 0xF1, 0x03, 0xff, IPMI_EVENT_CLASS_DISCRETE, "IPMB-0 Status", "IPMB-A enabled, IPMP-B enabled" },
+ 
+ 	{ 0xF2, 0x00, 0xff, IPMI_EVENT_CLASS_DISCRETE, "Module Hot Swap", "Module Handle Closed" },
+ 	{ 0xF2, 0x01, 0xff, IPMI_EVENT_CLASS_DISCRETE, "Module Hot Swap", "Module Handle Opened" },
+ 	{ 0xF2, 0x02, 0xff, IPMI_EVENT_CLASS_DISCRETE, "Module Hot Swap", "Quiesced" },
+
+	{ 0xC0, 0x00, 0xff, 0x00, "OEM", NULL },
+
+	{ 0x00, 0x00, 0x00, 0x00, NULL, NULL },
 };
 
+
+/* These values are IANA numbers */
+typedef enum IPMI_OEM {
+    IPMI_OEM_UNKNOWN    = 0,
+    IPMI_OEM_SUN        = 42,
+    IPMI_OEM_INTEL      = 343,
+    IPMI_OEM_TYAN       = 6653,
+    IPMI_OEM_NEWISYS    = 9237,
+    IPMI_OEM_SUPERMICRO = 10876,
+    IPMI_OEM_KONTRON    = 15000,
+} IPMI_OEM;
+
 int ipmi_sel_main(struct ipmi_intf *, int, char **);
-void ipmi_sel_print_std_entry(int num, struct sel_event_record * evt);
+void ipmi_sel_print_std_entry(struct ipmi_intf * intf, struct sel_event_record * evt);
+void ipmi_sel_print_std_entry_verbose(struct ipmi_intf * intf, struct sel_event_record * evt);
+void ipmi_sel_print_extended_entry(struct ipmi_intf * intf, struct sel_event_record * evt);
+void ipmi_sel_print_extended_entry_verbose(struct ipmi_intf * intf, struct sel_event_record * evt);
+void ipmi_get_event_desc(struct ipmi_intf * intf, struct sel_event_record * rec, char ** desc);
+const char * ipmi_sel_get_sensor_type(uint8_t code);
+const char * ipmi_sel_get_sensor_type_offset(uint8_t code, uint8_t offset);
+uint16_t ipmi_sel_get_std_entry(struct ipmi_intf * intf, uint16_t id, struct sel_event_record * evt);
+char * get_newisys_evt_desc(struct ipmi_intf * intf, struct sel_event_record * rec);
+IPMI_OEM ipmi_get_oem(struct ipmi_intf * intf);
+char * ipmi_get_oem_desc(struct ipmi_intf * intf, struct sel_event_record * rec);
+int ipmi_sel_oem_init(const char * filename);
 
 #endif /* IPMI_SEL_H */

ipmitool/include/ipmitool/ipmi_sensor.h

@@ -0,0 +1,84 @@
+/*
+ * Copyright (c) 2003 Sun Microsystems, Inc.  All Rights Reserved.
+ * 
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 
+ * Redistribution of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 
+ * Redistribution in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * 
+ * Neither the name of Sun Microsystems, Inc. or the names of
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ * 
+ * This software is provided "AS IS," without a warranty of any kind.
+ * ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND WARRANTIES,
+ * INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A
+ * PARTICULAR PURPOSE OR NON-INFRINGEMENT, ARE HEREBY EXCLUDED.
+ * SUN MICROSYSTEMS, INC. ("SUN") AND ITS LICENSORS SHALL NOT BE LIABLE
+ * FOR ANY DAMAGES SUFFERED BY LICENSEE AS A RESULT OF USING, MODIFYING
+ * OR DISTRIBUTING THIS SOFTWARE OR ITS DERIVATIVES.  IN NO EVENT WILL
+ * SUN OR ITS LICENSORS BE LIABLE FOR ANY LOST REVENUE, PROFIT OR DATA,
+ * OR FOR DIRECT, INDIRECT, SPECIAL, CONSEQUENTIAL, INCIDENTAL OR
+ * PUNITIVE DAMAGES, HOWEVER CAUSED AND REGARDLESS OF THE THEORY OF
+ * LIABILITY, ARISING OUT OF THE USE OF OR INABILITY TO USE THIS SOFTWARE,
+ * EVEN IF SUN HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
+ */
+
+#ifndef IPMI_SENSOR_H
+#define IPMI_SENSOR_H
+
+#include <math.h>
+#include <ipmitool/bswap.h>
+#include <ipmitool/ipmi.h>
+#include <ipmitool/ipmi_sdr.h>
+
+/* threshold specification bits for analog sensors for get sensor threshold command 
+ * and set sensor threshold command 
+ */
+#define UPPER_NON_RECOV_SPECIFIED  0x20
+#define UPPER_CRIT_SPECIFIED       0x10
+#define UPPER_NON_CRIT_SPECIFIED   0x08
+#define LOWER_NON_RECOV_SPECIFIED  0x04
+#define LOWER_CRIT_SPECIFIED       0x02
+#define LOWER_NON_CRIT_SPECIFIED   0x01
+
+/* state assertion bits for discrete sensors for get sensor reading command */
+#define STATE_0_ASSERTED   0x01
+#define STATE_1_ASSERTED   0x02
+#define STATE_2_ASSERTED   0x04
+#define STATE_3_ASSERTED   0x08
+#define STATE_4_ASSERTED   0x10
+#define STATE_5_ASSERTED   0x20
+#define STATE_6_ASSERTED   0x40
+#define STATE_7_ASSERTED   0x80
+#define STATE_8_ASSERTED   0x01
+#define STATE_9_ASSERTED   0x02
+#define STATE_10_ASSERTED  0x04
+#define STATE_11_ASSERTED  0x08
+#define STATE_12_ASSERTED  0x10
+#define STATE_13_ASSERTED  0x20
+#define STATE_14_ASSERTED  0x40
+
+struct sensor_set_thresh_rq {
+	uint8_t	sensor_num;     	/* sensor # */
+	uint8_t	set_mask;       	/* threshold setting mask */
+	uint8_t	lower_non_crit;	        /* new lower non critical threshold*/
+	uint8_t	lower_crit;	        /* new lower critical threshold*/
+	uint8_t	lower_non_recov;	/* new lower non recoverable threshold*/
+	uint8_t	upper_non_crit;	        /* new upper non critical threshold*/
+	uint8_t	upper_crit;	        /* new upper critical threshold*/
+	uint8_t	upper_non_recov;	/* new upper non recoverable threshold*/
+} __attribute__ ((packed));
+
+
+int ipmi_sensor_main(struct ipmi_intf *, int, char **);
+int ipmi_sensor_print_full(struct ipmi_intf *, struct sdr_record_full_sensor *);
+int ipmi_sensor_print_compact(struct ipmi_intf *, struct sdr_record_compact_sensor *);
+
+#endif  /* IPMI_SENSOR_H */

ipmitool/include/ipmitool/ipmi_session.h

@@ -0,0 +1,125 @@
+/*
+ * Copyright (c) 2003 Sun Microsystems, Inc.  All Rights Reserved.
+ * 
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 
+ * Redistribution of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 
+ * Redistribution in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * 
+ * Neither the name of Sun Microsystems, Inc. or the names of
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ * 
+ * This software is provided "AS IS," without a warranty of any kind.
+ * ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND WARRANTIES,
+ * INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A
+ * PARTICULAR PURPOSE OR NON-INFRINGEMENT, ARE HEREBY EXCLUDED.
+ * SUN MICROSYSTEMS, INC. ("SUN") AND ITS LICENSORS SHALL NOT BE LIABLE
+ * FOR ANY DAMAGES SUFFERED BY LICENSEE AS A RESULT OF USING, MODIFYING
+ * OR DISTRIBUTING THIS SOFTWARE OR ITS DERIVATIVES.  IN NO EVENT WILL
+ * SUN OR ITS LICENSORS BE LIABLE FOR ANY LOST REVENUE, PROFIT OR DATA,
+ * OR FOR DIRECT, INDIRECT, SPECIAL, CONSEQUENTIAL, INCIDENTAL OR
+ * PUNITIVE DAMAGES, HOWEVER CAUSED AND REGARDLESS OF THE THEORY OF
+ * LIABILITY, ARISING OUT OF THE USE OF OR INABILITY TO USE THIS SOFTWARE,
+ * EVEN IF SUN HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
+ */
+
+#ifndef IPMI_SESSION_H
+#define IPMI_SESSION_H
+
+#if HAVE_CONFIG_H
+# include <config.h>
+#endif
+#include <ipmitool/ipmi.h>
+
+#define IPMI_GET_SESSION_INFO 0x3D
+
+/*
+ * From table 22.25 of the IPMIv2 specification
+ */
+struct get_session_info_rsp
+{
+	uint8_t session_handle;
+
+	#if WORDS_BIGENDIAN
+	uint8_t __reserved1        : 2;
+	uint8_t session_slot_count : 6; /* 1-based */
+	#else
+	uint8_t session_slot_count : 6; /* 1-based */
+	uint8_t __reserved1        : 2;
+	#endif
+
+	#if WORDS_BIGENDIAN
+	uint8_t __reserved2          : 2;
+	uint8_t active_session_count : 6; /* 1-based */
+	#else
+	uint8_t active_session_count : 6; /* 1-based */
+	uint8_t __reserved2          : 2;
+	#endif
+
+	#if WORDS_BIGENDIAN
+	uint8_t __reserved3          : 2;
+	uint8_t user_id              : 6;
+	#else
+	uint8_t user_id              : 6;
+	uint8_t __reserved3          : 2;
+	#endif
+
+	#if WORDS_BIGENDIAN
+	uint8_t __reserved4          : 4;
+	uint8_t privilege_level      : 4;
+	#else
+	uint8_t privilege_level      : 4;
+	uint8_t __reserved4          : 4;
+	#endif
+
+	#if WORDS_BIGENDIAN
+	uint8_t auxiliary_data       : 4;
+	uint8_t channel_number       : 4;
+	#else
+	uint8_t channel_number       : 4;
+	uint8_t auxiliary_data       : 4;
+	#endif
+
+	union
+	{
+		/* Only exists if channel type is 802.3 LAN */
+		struct
+		{
+			uint8_t console_ip[4];  /* MSBF */
+			uint8_t console_mac[6]; /* MSBF */
+			uint16_t      console_port;   /* LSBF */
+		} lan_data;
+
+		/* Only exists if channel type is async. serial modem */
+		struct
+		{
+			uint8_t session_channel_activity_type;
+		
+			#if WORDS_BIGENDIAN
+			uint8_t __reserved5          : 4;
+			uint8_t destination_selector : 4;
+			#else
+			uint8_t destination_selector : 4;
+			uint8_t __reserved5          : 4;
+			#endif
+
+ 			uint8_t console_ip[4];   /* MSBF */
+
+			/* Only exists if session is PPP */
+			uint16_t console_port;        /* LSBF */
+		} modem_data;
+	} channel_data;
+} __attribute__ ((packed));
+
+
+
+int ipmi_session_main(struct ipmi_intf *, int, char **);
+
+#endif /*IPMI_CHANNEL_H*/

ipmitool/include/ipmitool/ipmi_sol.h

@@ -28,10 +28,6 @@
  * PUNITIVE DAMAGES, HOWEVER CAUSED AND REGARDLESS OF THE THEORY OF
  * LIABILITY, ARISING OUT OF THE USE OF OR INABILITY TO USE THIS SOFTWARE,
  * EVEN IF SUN HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
- * 
- * You acknowledge that this software is not designed or intended for use
- * in the design, construction, operation or maintenance of any nuclear
- * facility.
  */
 
 #ifndef IPMI_SOL_H
@@ -39,17 +35,50 @@
 
 #include <ipmitool/ipmi.h>
 
-#define ACTIVATE_SOL			0x01
-#define SET_SOL_CONFIG			0x03
-#define GET_SOL_CONFIG			0x04
+#define SOL_ESCAPE_CHARACTER_DEFAULT        '~'
+#define SOL_KEEPALIVE_TIMEOUT               30
+
+#define IPMI_SOL_SERIAL_ALERT_MASK_SUCCEED  0x08
+#define IPMI_SOL_SERIAL_ALERT_MASK_DEFERRED 0x04
+#define IPMI_SOL_SERIAL_ALERT_MASK_FAIL     0x00
+#define IPMI_SOL_BMC_ASSERTS_CTS_MASK_TRUE  0x00
+#define IPMI_SOL_BMC_ASSERTS_CTS_MASK_FALSE 0x02
+
+
+struct sol_config_parameters {
+	uint8_t  set_in_progress;
+	uint8_t  enabled;
+	uint8_t  force_encryption;
+	uint8_t  force_authentication;
+	uint8_t  privilege_level;
+	uint8_t  character_accumulate_level;
+	uint8_t  character_send_threshold;
+	uint8_t  retry_count;
+	uint8_t  retry_interval;
+	uint8_t  non_volatile_bit_rate;
+	uint8_t  volatile_bit_rate;
+	uint8_t  payload_channel;
+	uint16_t payload_port;
+};
+
+
+/*
+ * The ACTIVATE PAYLOAD command reponse structure
+ * From table 24-2 of the IPMI v2.0 spec
+ */
+struct activate_payload_rsp {
+	uint8_t auxiliary_data[4];
+	uint8_t inbound_payload_size[2];  /* LS byte first */
+	uint8_t outbound_payload_size[2]; /* LS byte first */
+	uint8_t payload_udp_port[2];      /* LS byte first */
+	uint8_t payload_vlan_number[2];   /* LS byte first */
+} __attribute__ ((packed));
 
-#define SOL_ENABLE_PARAM		0x01
-#define SOL_AUTHENTICATION_PARAM	0x02
-#define SOL_ENABLE_FLAG			0x01
-#define SOL_PRIVILEGE_LEVEL_USER	0x02
-#define SOL_BAUD_RATE_PARAM		0x05
-#define SOL_PREFERRED_BAUD_RATE		0x07
 
 int ipmi_sol_main(struct ipmi_intf *, int, char **);
+int ipmi_get_sol_info(struct ipmi_intf             * intf,
+					  uint8_t                  channel,
+					  struct sol_config_parameters * params);
+
 
 #endif /* IPMI_SOL_H */

ipmitool/include/ipmitool/ipmi_strings.h

@@ -0,0 +1,57 @@
+/*
+ * Copyright (c) 2003 Sun Microsystems, Inc.  All Rights Reserved.
+ * 
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 
+ * Redistribution of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 
+ * Redistribution in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * 
+ * Neither the name of Sun Microsystems, Inc. or the names of
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ * 
+ * This software is provided "AS IS," without a warranty of any kind.
+ * ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND WARRANTIES,
+ * INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A
+ * PARTICULAR PURPOSE OR NON-INFRINGEMENT, ARE HEREBY EXCLUDED.
+ * SUN MICROSYSTEMS, INC. ("SUN") AND ITS LICENSORS SHALL NOT BE LIABLE
+ * FOR ANY DAMAGES SUFFERED BY LICENSEE AS A RESULT OF USING, MODIFYING
+ * OR DISTRIBUTING THIS SOFTWARE OR ITS DERIVATIVES.  IN NO EVENT WILL
+ * SUN OR ITS LICENSORS BE LIABLE FOR ANY LOST REVENUE, PROFIT OR DATA,
+ * OR FOR DIRECT, INDIRECT, SPECIAL, CONSEQUENTIAL, INCIDENTAL OR
+ * PUNITIVE DAMAGES, HOWEVER CAUSED AND REGARDLESS OF THE THEORY OF
+ * LIABILITY, ARISING OUT OF THE USE OF OR INABILITY TO USE THIS SOFTWARE,
+ * EVEN IF SUN HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
+ */
+
+#ifndef IPMI_STRINGS_H
+#define IPMI_STRINGS_H
+
+#include <ipmitool/helper.h>
+
+extern const struct valstr completion_code_vals[];
+extern const struct valstr entity_id_vals[];
+extern const struct valstr entity_device_type_vals[];
+extern const struct valstr ipmi_netfn_vals[];
+extern const struct valstr ipmi_channel_activity_type_vals[];
+extern const struct valstr ipmi_privlvl_vals[];
+extern const struct valstr impi_bit_rate_vals[];
+extern const struct valstr ipmi_set_in_progress_vals[];
+extern const struct valstr ipmi_authtype_session_vals[];
+extern const struct valstr ipmi_authtype_vals[];
+extern const struct valstr ipmi_channel_protocol_vals[];
+extern const struct valstr ipmi_channel_medium_vals[];
+extern const struct valstr ipmi_chassis_power_control_vals[];
+extern const struct valstr ipmi_auth_algorithms[];
+extern const struct valstr ipmi_integrity_algorithms[];
+extern const struct valstr ipmi_encryption_algorithms[];
+extern const struct valstr ipmi_oem_info[];
+
+
+#endif /*IPMI_STRINGS_H*/

ipmitool/include/ipmitool/ipmi_sunoem.h

@@ -0,0 +1,57 @@
+/*
+ * Copyright (c) 2003 Sun Microsystems, Inc.  All Rights Reserved.
+ * 
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 
+ * Redistribution of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 
+ * Redistribution in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * 
+ * Neither the name of Sun Microsystems, Inc. or the names of
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ * 
+ * This software is provided "AS IS," without a warranty of any kind.
+ * ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND WARRANTIES,
+ * INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A
+ * PARTICULAR PURPOSE OR NON-INFRINGEMENT, ARE HEREBY EXCLUDED.
+ * SUN MICROSYSTEMS, INC. ("SUN") AND ITS LICENSORS SHALL NOT BE LIABLE
+ * FOR ANY DAMAGES SUFFERED BY LICENSEE AS A RESULT OF USING, MODIFYING
+ * OR DISTRIBUTING THIS SOFTWARE OR ITS DERIVATIVES.  IN NO EVENT WILL
+ * SUN OR ITS LICENSORS BE LIABLE FOR ANY LOST REVENUE, PROFIT OR DATA,
+ * OR FOR DIRECT, INDIRECT, SPECIAL, CONSEQUENTIAL, INCIDENTAL OR
+ * PUNITIVE DAMAGES, HOWEVER CAUSED AND REGARDLESS OF THE THEORY OF
+ * LIABILITY, ARISING OUT OF THE USE OF OR INABILITY TO USE THIS SOFTWARE,
+ * EVEN IF SUN HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
+ */
+
+#ifndef IPMI_SUNOEM_H
+#define IPMI_SUNOEM_H
+
+#if HAVE_CONFIG_H
+# include <config.h>
+#endif
+#include <ipmitool/ipmi.h>
+#include <ipmitool/ipmi_sdr.h>
+
+#define IPMI_NETFN_SUNOEM		0x2e
+
+#define IPMI_SUNOEM_SET_SSH_KEY		0x01
+#define IPMI_SUNOEM_DEL_SSH_KEY		0x02
+#define IPMI_SUNOEM_GET_HEALTH_STATUS	0x10
+#define IPMI_SUNOEM_SET_FAN_SPEED	0x20
+#define IPMI_SUNOEM_LED_GET		0x21
+#define IPMI_SUNOEM_LED_SET		0x22
+
+int ipmi_sunoem_main(struct ipmi_intf *, int, char **);
+
+struct ipmi_rs * sunoem_led_get(struct ipmi_intf * intf, struct sdr_record_generic_locator * dev, int ledtype);
+struct ipmi_rs * sunoem_led_set(struct ipmi_intf * intf, struct sdr_record_generic_locator * dev, int ledtype, int ledmode);
+
+#endif /*IPMI_SUNOEM_H*/
+

ipmitool/include/ipmitool/ipmi_tsol.h

@@ -0,0 +1,46 @@
+/*
+ * Copyright (c) 2005 Tyan Computer Corp.  All Rights Reserved.
+ * 
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 
+ * Redistribution of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 
+ * Redistribution in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * 
+ * Neither the name of Sun Microsystems, Inc. or the names of
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ * 
+ * This software is provided "AS IS," without a warranty of any kind.
+ * ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND WARRANTIES,
+ * INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A
+ * PARTICULAR PURPOSE OR NON-INFRINGEMENT, ARE HEREBY EXCLUDED.
+ * SUN MICROSYSTEMS, INC. ("SUN") AND ITS LICENSORS SHALL NOT BE LIABLE
+ * FOR ANY DAMAGES SUFFERED BY LICENSEE AS A RESULT OF USING, MODIFYING
+ * OR DISTRIBUTING THIS SOFTWARE OR ITS DERIVATIVES.  IN NO EVENT WILL
+ * SUN OR ITS LICENSORS BE LIABLE FOR ANY LOST REVENUE, PROFIT OR DATA,
+ * OR FOR DIRECT, INDIRECT, SPECIAL, CONSEQUENTIAL, INCIDENTAL OR
+ * PUNITIVE DAMAGES, HOWEVER CAUSED AND REGARDLESS OF THE THEORY OF
+ * LIABILITY, ARISING OUT OF THE USE OF OR INABILITY TO USE THIS SOFTWARE,
+ * EVEN IF SUN HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
+ */
+
+#ifndef IPMI_TSOL_H
+#define IPMI_TSOL_H
+
+#include <ipmitool/ipmi.h>
+
+#define IPMI_TSOL_CMD_SENDKEY	0x03
+#define IPMI_TSOL_CMD_START	0x06
+#define IPMI_TSOL_CMD_STOP	0x02
+
+#define IPMI_TSOL_DEF_PORT	6230
+
+int ipmi_tsol_main(struct ipmi_intf *, int, char **);
+
+#endif /* IPMI_TSOL_H */

ipmitool/include/ipmitool/ipmi_user.h

@@ -0,0 +1,89 @@
+/*
+ * Copyright (c) 2003 Sun Microsystems, Inc.  All Rights Reserved.
+ * 
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 
+ * Redistribution of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 
+ * Redistribution in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * 
+ * Neither the name of Sun Microsystems, Inc. or the names of
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ * 
+ * This software is provided "AS IS," without a warranty of any kind.
+ * ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND WARRANTIES,
+ * INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A
+ * PARTICULAR PURPOSE OR NON-INFRINGEMENT, ARE HEREBY EXCLUDED.
+ * SUN MICROSYSTEMS, INC. ("SUN") AND ITS LICENSORS SHALL NOT BE LIABLE
+ * FOR ANY DAMAGES SUFFERED BY LICENSEE AS A RESULT OF USING, MODIFYING
+ * OR DISTRIBUTING THIS SOFTWARE OR ITS DERIVATIVES.  IN NO EVENT WILL
+ * SUN OR ITS LICENSORS BE LIABLE FOR ANY LOST REVENUE, PROFIT OR DATA,
+ * OR FOR DIRECT, INDIRECT, SPECIAL, CONSEQUENTIAL, INCIDENTAL OR
+ * PUNITIVE DAMAGES, HOWEVER CAUSED AND REGARDLESS OF THE THEORY OF
+ * LIABILITY, ARISING OUT OF THE USE OF OR INABILITY TO USE THIS SOFTWARE,
+ * EVEN IF SUN HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
+ */
+
+#ifndef IPMI_USER_H
+#define IPMI_USER_H
+
+#if HAVE_CONFIG_H
+# include <config.h>
+#endif
+#include <ipmitool/ipmi.h>
+
+
+/*
+ * The GET USER ACCESS response from table 22-32 of the IMPI v2.0 spec
+ */
+struct user_access_rsp {
+#if WORDS_BIGENDIAN
+	uint8_t __reserved1 : 2;
+	uint8_t maximum_ids : 6;
+#else
+	uint8_t maximum_ids : 6;
+	uint8_t __reserved1 : 2;
+#endif
+
+#if WORDS_BIGENDIAN
+	uint8_t __reserved2        : 2;
+	uint8_t enabled_user_count : 6;
+#else
+	uint8_t enabled_user_count : 6;
+	uint8_t __reserved2        : 2;
+#endif
+
+#if WORDS_BIGENDIAN
+	uint8_t __reserved3      : 2;
+	uint8_t fixed_name_count : 6;
+#else
+	uint8_t fixed_name_count : 6;
+	uint8_t __reserved3      : 2;
+#endif
+
+#if WORDS_BIGENDIAN
+	uint8_t __reserved4             : 1;
+	uint8_t no_callin_access        : 1;
+	uint8_t link_auth_access        : 1;
+	uint8_t ipmi_messaging_access   : 1;
+	uint8_t channel_privilege_limit : 4;
+#else
+	uint8_t channel_privilege_limit : 4;
+	uint8_t ipmi_messaging_access   : 1;
+	uint8_t link_auth_access        : 1;
+	uint8_t no_callin_access        : 1;
+	uint8_t __reserved4             : 1;
+#endif
+} __attribute__ ((packed));
+
+
+
+int ipmi_user_main(struct ipmi_intf *, int, char **);
+
+#endif /* IPMI_USER_H */

ipmitool/include/ipmitool/log.h

@@ -0,0 +1,63 @@
+/*
+ * Copyright (c) 2003 Sun Microsystems, Inc.  All Rights Reserved.
+ * 
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 
+ * Redistribution of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 
+ * Redistribution in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * 
+ * Neither the name of Sun Microsystems, Inc. or the names of
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ * 
+ * This software is provided "AS IS," without a warranty of any kind.
+ * ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND WARRANTIES,
+ * INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A
+ * PARTICULAR PURPOSE OR NON-INFRINGEMENT, ARE HEREBY EXCLUDED.
+ * SUN MICROSYSTEMS, INC. ("SUN") AND ITS LICENSORS SHALL NOT BE LIABLE
+ * FOR ANY DAMAGES SUFFERED BY LICENSEE AS A RESULT OF USING, MODIFYING
+ * OR DISTRIBUTING THIS SOFTWARE OR ITS DERIVATIVES.  IN NO EVENT WILL
+ * SUN OR ITS LICENSORS BE LIABLE FOR ANY LOST REVENUE, PROFIT OR DATA,
+ * OR FOR DIRECT, INDIRECT, SPECIAL, CONSEQUENTIAL, INCIDENTAL OR
+ * PUNITIVE DAMAGES, HOWEVER CAUSED AND REGARDLESS OF THE THEORY OF
+ * LIABILITY, ARISING OUT OF THE USE OF OR INABILITY TO USE THIS SOFTWARE,
+ * EVEN IF SUN HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
+ */
+
+#ifndef IPMITOOL_LOG_H
+#define IPMITOOL_LOG_H
+
+#include <syslog.h>
+
+/* sys/syslog.h:
+ * LOG_EMERG       0       system is unusable
+ * LOG_ALERT       1       action must be taken immediately
+ * LOG_CRIT        2       critical conditions
+ * LOG_ERR         3       error conditions
+ * LOG_WARNING     4       warning conditions
+ * LOG_NOTICE      5       normal but significant condition
+ * LOG_INFO        6       informational
+ * LOG_DEBUG       7       debug-level messages
+ */
+
+#define LOG_ERROR		LOG_ERR
+#define LOG_WARN		LOG_WARNING
+
+#define LOG_NAME_DEFAULT	"ipmitool"
+#define LOG_MSG_LENGTH		1024
+
+void log_init(const char * name, int isdaemon, int verbose);
+void log_halt(void);
+void log_level_set(int level);
+int log_level_get(void);
+void lprintf(int level, const char * format, ...);
+void lperror(int level, const char * format, ...);
+
+#endif /*IPMITOOL_LOG_H*/
+

ipmitool/ipmitool.spec.in

@@ -1,113 +0,0 @@
-Name:         @IPMITOOL_PKG@
-Summary:      @IPMITOOL_PKG@ - Utility for interfacing with IPMI devices
-Version:      @VERSION@
-Release:      1
-Copyright:    BSD
-Group:        Utilities
-Vendor:       Sun Microsystems
-Packager:     Duncan Laurie <duncan@sun.com>
-Source:       @IPMITOOL_PKG@-@VERSION@.tar.gz
-Buildroot:    /var/tmp/@IPMITOOL_PKG@-root
-
-%package dev
-Summary: Development files for ipmitool
-Group: Utilities
-
-%description
-This package contains a utility for interfacing with IPMI-enabled devices
-through either the OpenIPMI kernel driver or with IPMI-over-LAN protocol.
-It provides some basic functions for reading the SDR and displaying sensor
-values, displaying the contents of the SEL, printing FRU information,
-reading and setting LAN configuration, and chassis power control.
-
-%description dev
-Additional development files for creating applications or interface plugins
-for ipmitool.
-
-%prep
-if [ "$RPM_BUILD_ROOT" ] && [ "$RPM_BUILD_ROOT" != "/" ]; then
-    rm -rf $RPM_BUILD_ROOT
-fi
-
-%setup
-
-%build
-./configure @ac_configure_args@ \
-	--prefix=%{_prefix} \
-	--bindir=%{_bindir} \
-	--datadir=%{_datadir} \
-	--includedir=%{_includedir} \
-	--libdir=%{_libdir} \
-	--mandir=%{_mandir} \
-	--sysconfdir=%{_sysconfdir}
-make
-
-%install
-make DESTDIR=$RPM_BUILD_ROOT install
-
-%clean
-if [ "$RPM_BUILD_ROOT" ] && [ "$RPM_BUILD_ROOT" != "/" ]; then
-    rm -rf $RPM_BUILD_ROOT
-fi
-rm -rf $RPM_BUILD_DIR/@IPMITOOL_PKG@-@VERSION@
-
-%files
-%defattr(-,root,root)
-%doc %{_mandir}/man1/*
-%{_bindir}/*
-%dir %{_libdir}/ipmitool
-%attr(755,root,root) %{_libdir}/ipmitool/*
-
-%files dev
-%defattr(-,root,root)
-%dir %{_includedir}/ipmitool
-%{_includedir}/ipmitool/*.h
-
-%changelog
-* Thu Dec  4 2003 <duncan@sun.com>  1.5.6-1
- - Fix SEL event decoding for generic events
- - Handle empty SEL gracefully when doing "sel list"
- - Fix sdr handling of sensors that do not return a reading
- - Fix for CSV display of sensor readings/units from Fredrik <EFBFBD>hrn
-
-* Tue Nov 25 2003 <duncan@sun.com>  1.5.5-1
- - Add -U option for setting LAN username
- - Fix -v usage for plugin interfaces
-
-* Fri Nov 14 2003 <duncan@sun.com>  1.5.4-1
- - pull interface plugin api into library
- - fix ipmievd
-
-* Fri Oct 31 2003 <duncan@sun.com>  1.5.3-1
- - add -g optin for pedantic ipmi-over-lan communication
-
-* Fri Oct 24 2003 <duncan@sun.com>  1.5.2-1
- - add gratuitous arp interval setting
-
-* Wed Oct  8 2003 <duncan@sun.com>  1.5.1-1
- - better SEL support
- - fix display bug in SDR list
-
-* Fri Sep  5 2003 <duncan@sun.com>  1.5.0-1
- - use automake/autoconf/libtool
- - dynamic loading interface plugins
-
-* Wed May 28 2003 <duncan@sun.com>  1.4.0-1
- - make UDP packet handling more robust
- - fix imb driver support
-
-* Thu May 22 2003 <duncan@sun.com>  1.3-1
- - update manpage
- - rework of low-level network handling
- - add basic imb driver support
-
-* Wed Apr  2 2003 <duncan@sun.com>  1.2-1
- - change command line option parsing
- - support for more chassis commands
-
-* Tue Apr  1 2003 <duncan@sun.com>  1.1-1
- - minor fixes.
-
-* Sun Mar 30 2003 <duncan@sun.com>  1.0-1
- - Initial release.
-

ipmitool/lib/Makefile.am

@@ -27,17 +27,19 @@
 # PUNITIVE DAMAGES, HOWEVER CAUSED AND REGARDLESS OF THE THEORY OF
 # LIABILITY, ARISING OUT OF THE USE OF OR INABILITY TO USE THIS SOFTWARE,
 # EVEN IF SUN HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
-# 
-# You acknowledge that this software is not designed or intended for use
-# in the design, construction, operation or maintenance of any nuclear
-# facility.
 
 INCLUDES			= -I$(top_srcdir)/include
 MAINTAINERCLEANFILES		= Makefile.in
 
 noinst_LTLIBRARIES		= libipmitool.la
-libipmitool_la_SOURCES		= helper.c ipmi_sdr.c ipmi_sel.c ipmi_sol.c ipmi_lanp.c \
-				  ipmi_fru.c ipmi_chassis.c ipmi_bmc.c ipmi_intf.c
+libipmitool_la_SOURCES	= helper.c ipmi_sdr.c ipmi_sel.c ipmi_sol.c ipmi_pef.c \
+				  ipmi_lanp.c ipmi_fru.c ipmi_chassis.c ipmi_mc.c log.c            \
+				  dimm_spd.c ipmi_sensor.c ipmi_channel.c ipmi_event.c             \
+				  ipmi_session.c ipmi_strings.c ipmi_user.c ipmi_raw.c             \
+				  ipmi_oem.c ipmi_isol.c ipmi_sunoem.c ipmi_fwum.c ipmi_picmg.c    \
+				  ipmi_main.c ipmi_tsol.c ipmi_firewall.c
+
 libipmitool_la_LDFLAGS		= -export-dynamic
-libipmitool_la_LIBADD		= -lm $(LIBLTDL)
-libipmitool_la_DEPENDENCIES	= $(LIBLTDL)
+libipmitool_la_LIBADD		= -lm
+libipmitool_la_DEPENDENCIES	= 
+

ipmitool/lib/dimm_spd.c

@@ -0,0 +1,794 @@
+/*
+ * Copyright (c) 2003 Sun Microsystems, Inc.  All Rights Reserved.
+ * 
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 
+ * Redistribution of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 
+ * Redistribution in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * 
+ * Neither the name of Sun Microsystems, Inc. or the names of
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ * 
+ * This software is provided "AS IS," without a warranty of any kind.
+ * ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND WARRANTIES,
+ * INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A
+ * PARTICULAR PURPOSE OR NON-INFRINGEMENT, ARE HEREBY EXCLUDED.
+ * SUN MICROSYSTEMS, INC. ("SUN") AND ITS LICENSORS SHALL NOT BE LIABLE
+ * FOR ANY DAMAGES SUFFERED BY LICENSEE AS A RESULT OF USING, MODIFYING
+ * OR DISTRIBUTING THIS SOFTWARE OR ITS DERIVATIVES.  IN NO EVENT WILL
+ * SUN OR ITS LICENSORS BE LIABLE FOR ANY LOST REVENUE, PROFIT OR DATA,
+ * OR FOR DIRECT, INDIRECT, SPECIAL, CONSEQUENTIAL, INCIDENTAL OR
+ * PUNITIVE DAMAGES, HOWEVER CAUSED AND REGARDLESS OF THE THEORY OF
+ * LIABILITY, ARISING OUT OF THE USE OF OR INABILITY TO USE THIS SOFTWARE,
+ * EVEN IF SUN HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
+ */
+
+#include <ipmitool/ipmi.h>
+#include <ipmitool/log.h>
+#include <ipmitool/helper.h>
+#include <ipmitool/ipmi_intf.h>
+#include <ipmitool/ipmi_fru.h>
+
+#include <stdlib.h>
+#include <string.h>
+
+extern int verbose;
+
+const struct valstr spd_memtype_vals[] = {
+	{ 0x02, "EDO" },
+	{ 0x04, "SDRAM" },
+	{ 0x07, "DDR" },
+	{ 0x00, NULL },
+};
+
+const struct valstr spd_config_vals[] = {
+	{ 0x00, "None" },
+	{ 0x01, "Parity" },
+	{ 0x02, "ECC" },
+	{ 0x00, NULL },
+};
+
+const struct valstr spd_voltage_vals[] = {
+	{ 0x00, "5.0V TTL" },
+	{ 0x01, "LVTTL" },
+	{ 0x02, "HSTL 1.5V" },
+	{ 0x03, "SSTL 3.3V" },
+	{ 0x04, "SSTL 2.5V" },
+	{ 0x00, NULL },
+};
+
+/*
+ * JEDEC Standard Manufacturers Identification Code
+ * publication JEP106N, December 2003
+ */
+
+const struct valstr jedec_id1_vals[] = {
+	{ 0x01, "AMD" },
+	{ 0x02, "AMI" },
+	{ 0x83, "Fairchild" },
+	{ 0x04, "Fujitsu" },
+	{ 0x85, "GTE" },
+	{ 0x86, "Harris" },
+	{ 0x07, "Hitachi" },
+	{ 0x08, "Inmos" },
+	{ 0x89, "Intel" },
+	{ 0x8a, "I.T.T." },
+	{ 0x0b, "Intersil" },
+	{ 0x8c, "Monolithic Memories" },
+	{ 0x0d, "Mostek" },
+	{ 0x0e, "Motorola" },
+	{ 0x8f, "National" },
+	{ 0x10, "NEC" },
+	{ 0x91, "RCA" },
+	{ 0x92, "Raytheon" },
+	{ 0x13, "Conexant (Rockwell)" },
+	{ 0x94, "Seeq" },
+	{ 0x15, "Philips Semi. (Signetics)" },
+	{ 0x16, "Synertek" },
+	{ 0x97, "Texas Instruments" },
+	{ 0x98, "Toshiba" },
+	{ 0x19, "Xicor" },
+	{ 0x1a, "Zilog" },
+	{ 0x9b, "Eurotechnique" },
+	{ 0x1c, "Mitsubishi" },
+	{ 0x9d, "Lucent (AT&T)" },
+	{ 0x9e, "Exel" },
+	{ 0x1f, "Atmel" },
+	{ 0x20, "SGS/Thomson" },
+	{ 0xa1, "Lattice Semi." },
+	{ 0xa2, "NCR" },
+	{ 0x23, "Wafer Scale Integration" },
+	{ 0xa4, "IBM" },
+	{ 0x25, "Tristar" },
+	{ 0x26, "Visic" },
+	{ 0xa7, "Intl. CMOS Technology" },
+	{ 0xa8, "SSSI" },
+	{ 0x29, "Microchip Technology" },
+	{ 0x2a, "Ricoh Ltd." },
+	{ 0xab, "VLSI" },
+	{ 0x2c, "Micron Technology" },
+	{ 0xad, "Hyundai Electronics" },
+	{ 0xae, "OKI Semiconductor" },
+	{ 0x2f, "ACTEL" },
+	{ 0xb0, "Sharp" },
+	{ 0x31, "Catalyst" },
+	{ 0x32, "Panasonic" },
+	{ 0xb3, "IDT" },
+	{ 0x34, "Cypress" },
+	{ 0xb5, "DEC" },
+	{ 0xb6, "LSI Logic" },
+	{ 0x37, "Zarlink" },
+	{ 0x38, "UTMC" },
+	{ 0xb9, "Thinking Machine" },
+	{ 0xba, "Thomson CSF" },
+	{ 0x3b, "Integrated CMOS(Vertex)" },
+	{ 0xbc, "Honeywell" },
+	{ 0x3d, "Tektronix" },
+	{ 0x3e, "Sun Microsystems" },
+	{ 0xbf, "SST" },
+	{ 0x40, "MOSEL" },
+	{ 0xc1, "Infineon" },
+	{ 0xc2, "Macronix" },
+	{ 0x43, "Xerox" },
+	{ 0xc4, "Plus Logic" },
+	{ 0x45, "SunDisk" },
+	{ 0x46, "Elan Circuit Tech." },
+	{ 0xc7, "European Silicon Str." },
+	{ 0xc8, "Apple Computer" },
+	{ 0xc9, "Xilinx" },
+	{ 0x4a, "Compaq" },
+	{ 0xcb, "Protocol Engines" },
+	{ 0x4c, "SCI" },
+	{ 0xcd, "Seiko Instruments" },
+	{ 0xce, "Samsung" },
+	{ 0x4f, "I3 Design System" },
+	{ 0xd0, "Klic" },
+	{ 0x51, "Crosspoint Solutions" },
+	{ 0x52, "Alliance Semiconductor" },
+	{ 0xd3, "Tandem" },
+	{ 0x54, "Hewlett-Packard" },
+	{ 0xd5, "Intg. Silicon Solutions" },
+	{ 0xd6, "Brooktree" },
+	{ 0x57, "New Media" },
+	{ 0x58, "MHS Electronic" },
+	{ 0xd9, "Performance Semi." },
+	{ 0xda, "Winbond Electronic" },
+	{ 0x5b, "Kawasaki Steel" },
+	{ 0xdc, "Bright Micro" },
+	{ 0x5d, "TECMAR" },
+	{ 0x5e, "Exar" },
+	{ 0xdf, "PCMCIA" },
+	{ 0xe0, "LG Semiconductor" },
+	{ 0x61, "Northern Telecom" },
+	{ 0x62, "Sanyo" },
+	{ 0xe3, "Array Microsystems" },
+	{ 0x64, "Crystal Semiconductor" },
+	{ 0xe5, "Analog Devices" },
+	{ 0xe6, "PMC-Sierra" },
+	{ 0x67, "Asparix" },
+	{ 0x68, "Convex Computer" },
+	{ 0xe9, "Quality Semiconductor" },
+	{ 0xea, "Nimbus Technology" },
+	{ 0x6b, "Transwitch" },
+	{ 0xec, "Micronas (ITT Intermetall)" },
+	{ 0x6d, "Cannon" },
+	{ 0x6e, "Altera" },
+	{ 0xef, "NEXCOM" },
+	{ 0x70, "QUALCOMM" },
+	{ 0xf1, "Sony" },
+	{ 0xf2, "Cray Research" },
+	{ 0x73, "AMS (Austria Micro)" },
+	{ 0xf4, "Vitesse" },
+	{ 0x75, "Aster Electronics" },
+	{ 0x76, "Bay Networks (Synoptic)" },
+	{ 0xf7, "Zentrum" },
+	{ 0xf8, "TRW" },
+	{ 0x79, "Thesys" },
+	{ 0x7a, "Solbourne Computer" },
+	{ 0xfb, "Allied-Signal" },
+	{ 0x7c, "Dialog" },
+	{ 0xfd, "Media Vision" },
+	{ 0xfe, "Level One Communication" },
+	{ 0x00, NULL },
+};
+
+const struct valstr jedec_id2_vals[] = {
+	{ 0x01, "Cirrus Logic" },
+	{ 0x02, "National Instruments" },
+	{ 0x83, "ILC Data Device" },
+	{ 0x04, "Alcatel Mietec" },
+	{ 0x85, "Micro Linear" },
+	{ 0x86, "Univ. of NC" },
+	{ 0x07, "JTAG Technologies" },
+	{ 0x08, "Loral" },
+	{ 0x89, "Nchip" },
+	{ 0x8A, "Galileo Tech" },
+	{ 0x0B, "Bestlink Systems" },
+	{ 0x8C, "Graychip" },
+	{ 0x0D, "GENNUM" },
+	{ 0x0E, "VideoLogic" },
+	{ 0x8F, "Robert Bosch" },
+	{ 0x10, "Chip Express" },
+	{ 0x91, "DATARAM" },
+	{ 0x92, "United Microelec Corp." },
+	{ 0x13, "TCSI" },
+	{ 0x94, "Smart Modular" },
+	{ 0x15, "Hughes Aircraft" },
+	{ 0x16, "Lanstar Semiconductor" },
+	{ 0x97, "Qlogic" },
+	{ 0x98, "Kingston" },
+	{ 0x19, "Music Semi" },
+	{ 0x1A, "Ericsson Components" },
+	{ 0x9B, "SpaSE" },
+	{ 0x1C, "Eon Silicon Devices" },
+	{ 0x9D, "Programmable Micro Corp" },
+	{ 0x9E, "DoD" },
+	{ 0x1F, "Integ. Memories Tech." },
+	{ 0x20, "Corollary Inc." },
+	{ 0xA1, "Dallas Semiconductor" },
+	{ 0xA2, "Omnivision" },
+	{ 0x23, "EIV(Switzerland)" },
+	{ 0xA4, "Novatel Wireless" },
+	{ 0x25, "Zarlink (formerly Mitel)" },
+	{ 0x26, "Clearpoint" },
+	{ 0xA7, "Cabletron" },
+	{ 0xA8, "Silicon Technology" },
+	{ 0x29, "Vanguard" },
+	{ 0x2A, "Hagiwara Sys-Com" },
+	{ 0xAB, "Vantis" },
+	{ 0x2C, "Celestica" },
+	{ 0xAD, "Century" },
+	{ 0xAE, "Hal Computers" },
+	{ 0x2F, "Rohm Company Ltd." },
+	{ 0xB0, "Juniper Networks" },
+	{ 0x31, "Libit Signal Processing" },
+	{ 0x32, "Enhanced Memories Inc." },
+	{ 0xB3, "Tundra Semiconductor" },
+	{ 0x34, "Adaptec Inc." },
+	{ 0xB5, "LightSpeed Semi." },
+	{ 0xB6, "ZSP Corp." },
+	{ 0x37, "AMIC Technology" },
+	{ 0x38, "Adobe Systems" },
+	{ 0xB9, "Dynachip" },
+	{ 0xBA, "PNY Electronics" },
+	{ 0x3B, "Newport Digital" },
+	{ 0xBC, "MMC Networks" },
+	{ 0x3D, "T Square" },
+	{ 0x3E, "Seiko Epson" },
+	{ 0xBF, "Broadcom" },
+	{ 0x40, "Viking Components" },
+	{ 0xC1, "V3 Semiconductor" },
+	{ 0xC2, "Flextronics (formerly Orbit)" },
+	{ 0x43, "Suwa Electronics" },
+	{ 0xC4, "Transmeta" },
+	{ 0x45, "Micron CMS" },
+	{ 0x46, "American Computer & Digital Components Inc" },
+	{ 0xC7, "Enhance 3000 Inc" },
+	{ 0xC8, "Tower Semiconductor" },
+	{ 0x49, "CPU Design" },
+	{ 0x4A, "Price Point" },
+	{ 0xCB, "Maxim Integrated Product" },
+	{ 0x4C, "Tellabs" },
+	{ 0xCD, "Centaur Technology" },
+	{ 0xCE, "Unigen Corporation" },
+	{ 0x4F, "Transcend Information" },
+	{ 0xD0, "Memory Card Technology" },
+	{ 0x51, "CKD Corporation Ltd." },
+	{ 0x52, "Capital Instruments, Inc." },
+	{ 0xD3, "Aica Kogyo, Ltd." },
+	{ 0x54, "Linvex Technology" },
+	{ 0xD5, "MSC Vertriebs GmbH" },
+	{ 0xD6, "AKM Company, Ltd." },
+	{ 0x57, "Dynamem, Inc." },
+	{ 0x58, "NERA ASA" },
+	{ 0xD9, "GSI Technology" },
+	{ 0xDA, "Dane-Elec (C Memory)" },
+	{ 0x5B, "Acorn Computers" },
+	{ 0xDC, "Lara Technology" },
+	{ 0x5D, "Oak Technology, Inc." },
+	{ 0x5E, "Itec Memory" },
+	{ 0xDF, "Tanisys Technology" },
+	{ 0xE0, "Truevision" },
+	{ 0x61, "Wintec Industries" },
+	{ 0x62, "Super PC Memory" },
+	{ 0xE3, "MGV Memory" },
+	{ 0x64, "Galvantech" },
+	{ 0xE5, "Gadzoox Nteworks" },
+	{ 0xE6, "Multi Dimensional Cons." },
+	{ 0x67, "GateField" },
+	{ 0x68, "Integrated Memory System" },
+	{ 0xE9, "Triscend" },
+	{ 0xEA, "XaQti" },
+	{ 0x6B, "Goldenram" },
+	{ 0xEC, "Clear Logic" },
+	{ 0x6D, "Cimaron Communications" },
+	{ 0x6E, "Nippon Steel Semi. Corp." },
+	{ 0xEF, "Advantage Memory" },
+	{ 0x70, "AMCC" },
+	{ 0xF1, "LeCroy" },
+	{ 0xF2, "Yamaha Corporation" },
+	{ 0x73, "Digital Microwave" },
+	{ 0xF4, "NetLogic Microsystems" },
+	{ 0x75, "MIMOS Semiconductor" },
+	{ 0x76, "Advanced Fibre" },
+	{ 0xF7, "BF Goodrich Data." },
+	{ 0xF8, "Epigram" },
+	{ 0x79, "Acbel Polytech Inc." },
+	{ 0x7A, "Apacer Technology" },
+	{ 0xFB, "Admor Memory" },
+	{ 0x7C, "FOXCONN" },
+	{ 0xFD, "Quadratics Superconductor" },
+	{ 0xFE, "3COM" },
+	{ 0x00, NULL },
+};
+
+const struct valstr jedec_id3_vals[] = {
+	{ 0x01, "Camintonn Corporation" },
+	{ 0x02, "ISOA Incorporated" },
+	{ 0x83, "Agate Semiconductor" },
+	{ 0x04, "ADMtek Incorporated" },
+	{ 0x85, "HYPERTEC" },
+	{ 0x86, "Adhoc Technologies" },
+	{ 0x07, "MOSAID Technologies" },
+	{ 0x08, "Ardent Technologies" },
+	{ 0x89, "Switchcore" },
+	{ 0x8A, "Cisco Systems, Inc." },
+	{ 0x0B, "Allayer Technologies" },
+	{ 0x8C, "WorkX AG" },
+	{ 0x0D, "Oasis Semiconductor" },
+	{ 0x0E, "Novanet Semiconductor" },
+	{ 0x8F, "E-M Solutions" },
+	{ 0x10, "Power General" },
+	{ 0x91, "Advanced Hardware Arch." },
+	{ 0x92, "Inova Semiconductors GmbH" },
+	{ 0x13, "Telocity" },
+	{ 0x94, "Delkin Devices" },
+	{ 0x15, "Symagery Microsystems" },
+	{ 0x16, "C-Port Corporation" },
+	{ 0x97, "SiberCore Technologies" },
+	{ 0x98, "Southland Microsystems" },
+	{ 0x19, "Malleable Technologies" },
+	{ 0x1A, "Kendin Communications" },
+	{ 0x9B, "Great Technology Microcomputer" },
+	{ 0x1C, "Sanmina Corporation" },
+	{ 0x9D, "HADCO Corporation" },
+	{ 0x9E, "Corsair" },
+	{ 0x1F, "Actrans System Inc." },
+	{ 0x20, "ALPHA Technologies" },
+	{ 0xA1, "Cygnal Integrated Products Incorporated" },
+	{ 0xA2, "Artesyn Technologies" },
+	{ 0x23, "Align Manufacturing" },
+	{ 0xA4, "Peregrine Semiconductor" },
+	{ 0x25, "Chameleon Systems" },
+	{ 0x26, "Aplus Flash Technology" },
+	{ 0xA7, "MIPS Technologies" },
+	{ 0xA8, "Chrysalis ITS" },
+	{ 0x29, "ADTEC Corporation" },
+	{ 0x2A, "Kentron Technologies" },
+	{ 0xAB, "Win Technologies" },
+	{ 0x2C, "ASIC Designs Inc" },
+	{ 0xAD, "Extreme Packet Devices" },
+	{ 0xAE, "RF Micro Devices" },
+	{ 0x2F, "Siemens AG" },
+	{ 0xB0, "Sarnoff Corporation" },
+	{ 0x31, "Itautec Philco SA" },
+	{ 0x32, "Radiata Inc." },
+	{ 0xB3, "Benchmark Elect. (AVEX)" },
+	{ 0x34, "Legend" },
+	{ 0xB5, "SpecTek Incorporated" },
+	{ 0xB6, "Hi/fn" },
+	{ 0x37, "Enikia Incorporated" },
+	{ 0x38, "SwitchOn Networks" },
+	{ 0xB9, "AANetcom Incorporated" },
+	{ 0xBA, "Micro Memory Bank" },
+	{ 0x3B, "ESS Technology" },
+	{ 0xBC, "Virata Corporation" },
+	{ 0x3D, "Excess Bandwidth" },
+	{ 0x3E, "West Bay Semiconductor" },
+	{ 0xBF, "DSP Group" },
+	{ 0x40, "Newport Communications" },
+	{ 0xC1, "Chip2Chip Incorporated" },
+	{ 0xC2, "Phobos Corporation" },
+	{ 0x43, "Intellitech Corporation" },
+	{ 0xC4, "Nordic VLSI ASA" },
+	{ 0x45, "Ishoni Networks" },
+	{ 0x46, "Silicon Spice" },
+	{ 0xC7, "Alchemy Semiconductor" },
+	{ 0xC8, "Agilent Technologies" },
+	{ 0x49, "Centillium Communications" },
+	{ 0x4A, "W.L. Gore" },
+	{ 0xCB, "HanBit Electronics" },
+	{ 0x4C, "GlobeSpan" },
+        { 0xCD, "Element 14" },
+	{ 0xCE, "Pycon" },
+	{ 0x4F, "Saifun Semiconductors" },
+	{ 0xD0, "Sibyte, Incorporated" },
+	{ 0x51, "MetaLink Technologies" },
+	{ 0x52, "Feiya Technology" },
+	{ 0xD3, "I & C Technology" },
+	{ 0x54, "Shikatronics" },
+	{ 0xD5, "Elektrobit" },
+	{ 0xD6, "Megic" },
+	{ 0x57, "Com-Tier" },
+	{ 0x58, "Malaysia Micro Solutions" },
+	{ 0xD9, "Hyperchip" },
+	{ 0xDA, "Gemstone Communications" },
+	{ 0x5B, "Anadyne Microelectronics" },
+	{ 0xDC, "3ParData" },
+	{ 0x5D, "Mellanox Technologies" },
+	{ 0x5E, "Tenx Technologies" },
+	{ 0xDF, "Helix AG" },
+	{ 0xE0, "Domosys" },
+	{ 0x61, "Skyup Technology" },
+	{ 0x62, "HiNT Corporation" },
+	{ 0xE3, "Chiaro" },
+	{ 0x64, "MCI Computer GMBH" },
+	{ 0xE5, "Exbit Technology A/S" },
+	{ 0xE6, "Integrated Technology Express" },
+	{ 0x67, "AVED Memory" },
+	{ 0x68, "Legerity" },
+	{ 0xE9, "Jasmine Networks" },
+	{ 0xEA, "Caspian Networks" },
+	{ 0x6B, "nCUBE" },
+	{ 0xEC, "Silicon Access Networks" },
+	{ 0x6D, "FDK Corporation" },
+	{ 0x6E, "High Bandwidth Access" },
+	{ 0xEF, "MultiLink Technology" },
+	{ 0x70, "BRECIS" },
+	{ 0xF1, "World Wide Packets" },
+	{ 0xF2, "APW" },
+	{ 0x73, "Chicory Systems" },
+	{ 0xF4, "Xstream Logic" },
+	{ 0x75, "Fast-Chip" },
+	{ 0x76, "Zucotto Wireless" },
+	{ 0xF7, "Realchip" },
+	{ 0xF8, "Galaxy Power" },
+	{ 0x79, "eSilicon" },
+	{ 0x7A, "Morphics Technology" },
+	{ 0xFB, "Accelerant Networks" },
+	{ 0x7C, "Silicon Wave" },
+	{ 0xFD, "SandCraft" },
+	{ 0xFE, "Elpida" },
+	{ 0x00, NULL },
+};
+
+const struct valstr jedec_id4_vals[] = {
+	{ 0x01, "Solectron" },
+	{ 0x02, "Optosys Technologies" },
+	{ 0x83, "Buffalo (Formerly Melco)" },
+	{ 0x04, "TriMedia Technologies" },
+	{ 0x85, "Cyan Technologies" },
+	{ 0x86, "Global Locate" },
+	{ 0x07, "Optillion" },
+	{ 0x08, "Terago Communications" },
+	{ 0x89, "Ikanos Communications" },
+	{ 0x8A, "Princeton Technology" },
+	{ 0x0B, "Nanya Technology" },
+	{ 0x8C, "Elite Flash Storage" },
+	{ 0x0D, "Mysticom" },
+	{ 0x0E, "LightSand Communications" },
+	{ 0x8F, "ATI Technologies" },
+	{ 0x10, "Agere Systems" },
+	{ 0x91, "NeoMagic" },
+	{ 0x92, "AuroraNetics" },
+	{ 0x13, "Golden Empire" },
+	{ 0x94, "Muskin" },
+	{ 0x15, "Tioga Technologies" },
+	{ 0x16, "Netlist" },
+	{ 0x97, "TeraLogic" },
+	{ 0x98, "Cicada Semiconductor" },
+	{ 0x19, "Centon Electronics" },
+	{ 0x1A, "Tyco Electronics" },
+	{ 0x9B, "Magis Works" },
+	{ 0x1C, "Zettacom" },
+	{ 0x9D, "Cogency Semiconductor" },
+	{ 0x9E, "Chipcon AS" },
+	{ 0x1F, "Aspex Technology" },
+	{ 0x20, "F5 Networks" },
+	{ 0xA1, "Programmable Silicon Solutions" },
+	{ 0xA2, "ChipWrights" },
+	{ 0x23, "Acorn Networks" },
+	{ 0xA4, "Quicklogic" },
+	{ 0x25, "Kingmax Semiconductor" },
+	{ 0x26, "BOPS" },
+	{ 0xA7, "Flasys" },
+	{ 0xA8, "BitBlitz Communications" },
+	{ 0x29, "eMemory Technology" },
+	{ 0x2A, "Procket Networks" },
+	{ 0xAB, "Purple Ray" },
+	{ 0x2C, "Trebia Networks" },
+	{ 0xAD, "Delta Electronics" },
+	{ 0xAE, "Onex Communications" },
+	{ 0x2F, "Ample Communications" },
+	{ 0xB0, "Memory Experts Intl" },
+	{ 0x31, "Astute Networks" },
+	{ 0x32, "Azanda Network Devices" },
+	{ 0xB3, "Dibcom" },
+	{ 0x34, "Tekmos" },
+	{ 0xB5, "API NetWorks" },
+	{ 0xB6, "Bay Microsystems" },
+	{ 0x37, "Firecron Ltd" },
+	{ 0x38, "Resonext Communications" },
+	{ 0xB9, "Tachys Technologies" },
+	{ 0xBA, "Equator Technology" },
+	{ 0x3B, "Concept Computer" },
+	{ 0xBC, "SILCOM" },
+	{ 0x3D, "3Dlabs" },
+	{ 0x3E, "ct Magazine" },
+	{ 0xBF, "Sanera Systems" },
+	{ 0x40, "Silicon Packets" },
+	{ 0xC1, "Viasystems Group" },
+	{ 0xC2, "Simtek" },
+	{ 0x43, "Semicon Devices Singapore" },
+	{ 0xC4, "Satron Handelsges" },
+	{ 0x45, "Improv Systems" },
+	{ 0x46, "INDUSYS GmbH" },
+	{ 0xC7, "Corrent" },
+	{ 0xC8, "Infrant Technologies" },
+	{ 0x49, "Ritek Corp" },
+	{ 0x4A, "empowerTel Networks" },
+	{ 0xCB, "Hypertec" },
+	{ 0x4C, "Cavium Networks" },
+	{ 0xCD, "PLX Technology" },
+	{ 0xCE, "Massana Design" },
+	{ 0x4F, "Intrinsity" },
+	{ 0xD0, "Valence Semiconductor" },
+	{ 0x51, "Terawave Communications" },
+	{ 0x52, "IceFyre Semiconductor" },
+	{ 0xD3, "Primarion" },
+	{ 0x54, "Picochip Designs Ltd" },
+	{ 0xD5, "Silverback Systems" },
+	{ 0xD6, "Jade Star Technologies" },
+	{ 0x57, "Pijnenburg Securealink" },
+	{ 0x58, "MemorySolutioN" },
+	{ 0xD9, "Cambridge Silicon Radio" },
+	{ 0xDA, "Swissbit" },
+	{ 0x5B, "Nazomi Communications" },
+	{ 0xDC, "eWave System" },
+	{ 0x5D, "Rockwell Collins" },
+	{ 0x5E, "PAION" },
+	{ 0xDF, "Alphamosaic Ltd" },
+	{ 0xE0, "Sandburst" },
+	{ 0x61, "SiCon Video" },
+	{ 0x62, "NanoAmp Solutions" },
+	{ 0xE3, "Ericsson Technology" },
+	{ 0x64, "PrairieComm" },
+	{ 0xE5, "Mitac International" },
+	{ 0xE6, "Layer N Networks" },
+	{ 0x67, "Atsana Semiconductor" },
+	{ 0x68, "Allegro Networks" },
+	{ 0xE9, "Marvell Semiconductors" },
+	{ 0xEA, "Netergy Microelectronic" },
+	{ 0x6B, "NVIDIA" },
+	{ 0xEC, "Internet Machines" },
+	{ 0x6D, "Peak Electronics" },
+	{ 0xEF, "Accton Technology" },
+	{ 0x70, "Teradiant Networks" },
+	{ 0xF1, "Europe Technologies" },
+	{ 0xF2, "Cortina Systems" },
+	{ 0x73, "RAM Components" },
+	{ 0xF4, "Raqia Networks" },
+	{ 0x75, "ClearSpeed" },
+	{ 0x76, "Matsushita Battery" },
+	{ 0xF7, "Xelerated" },
+	{ 0xF8, "SimpleTech" },
+	{ 0x79, "Utron Technology" },
+	{ 0x7A, "Astec International" },
+	{ 0xFB, "AVM gmbH" },
+	{ 0x7C, "Redux Communications" },
+	{ 0xFD, "Dot Hill Systems" },
+	{ 0xFE, "TeraChip" },
+	{ 0x00, NULL },
+};
+
+const struct valstr jedec_id5_vals[] = {
+	{ 0x01, "T-RAM Incorporated" },
+	{ 0x02, "Innovics Wireless" },
+	{ 0x83, "Teknovus" },
+	{ 0x04, "KeyEye Communications" },
+	{ 0x85, "Runcom Technologies" },
+	{ 0x86, "RedSwitch" },
+	{ 0x07, "Dotcast" },
+	{ 0x08, "Silicon Mountain Memory" },
+	{ 0x89, "Signia Technologies" },
+	{ 0x8A, "Pixim" },
+	{ 0x0B, "Galazar Networks" },
+	{ 0x8C, "White Electronic Designs" },
+	{ 0x0D, "Patriot Scientific" },
+	{ 0x0E, "Neoaxiom Corporation" },
+	{ 0x8F, "3Y Power Technology" },
+	{ 0x10, "Europe Technologies" },
+	{ 0x91, "Potentia Power Systems" },
+	{ 0x92, "C-guys Incorporated" },
+	{ 0x13, "Digital Communications Technology Incorporated" },
+	{ 0x94, "Silicon-Based Technology" },
+	{ 0x15, "Fulcrum Microsystems" },
+	{ 0x16, "Positivo Informatica Ltd" },
+	{ 0x97, "XIOtech Corporation" },
+	{ 0x98, "PortalPlayer" },
+	{ 0x19, "Zhiying Software" },
+	{ 0x1A, "Direct2Data" },
+	{ 0x9B, "Phonex Broadband" },
+	{ 0x1C, "Skyworks Solutions" },
+	{ 0x9D, "Entropic Communications" },
+	{ 0x9E, "Pacific Force Technology" },
+	{ 0x1F, "Zensys A/S" },
+	{ 0x20, "Legend Silicon Corp." },
+	{ 0xA1, "sci-worx GmbH" },
+	{ 0xA2, "Oasis Silicon Systems" },
+	{ 0x23, "Renesas Technology" },
+	{ 0xA4, "Raza Microelectronics" },
+	{ 0x25, "Phyworks" },
+	{ 0x26, "MediaTek" },
+	{ 0xA7, "Non-cents Productions" },
+	{ 0xA8, "US Modular" },
+	{ 0x29, "Wintegra Ltd" },
+	{ 0x2A, "Mathstar" },
+	{ 0xAB, "StarCore" },
+	{ 0x2C, "Oplus Technologies" },
+	{ 0xAD, "Mindspeed" },
+	{ 0xAE, "Just Young Computer" },
+	{ 0x2F, "Radia Communications" },
+	{ 0xB0, "OCZ" },
+	{ 0x31, "Emuzed" },
+	{ 0x32, "LOGIC Devices" },
+	{ 0xB3, "Inphi Corporation" },
+	{ 0x34, "Quake Technologies" },
+	{ 0xB5, "Vixel" },
+	{ 0xB6, "SolusTek" },
+	{ 0x37, "Kongsberg Maritime" },
+	{ 0x38, "Faraday Technology" },
+	{ 0xB9, "Altium Ltd." },
+	{ 0xBA, "Insyte" },
+	{ 0x3B, "ARM Ltd." },
+	{ 0xBC, "DigiVision" },
+	{ 0x3D, "Vativ Technologies" },
+	{ 0x3E, "Endicott Interconnect Technologies" },
+	{ 0xBF, "Pericom" },
+	{ 0x40, "Bandspeed" },
+	{ 0xC1, "LeWiz Communications" },
+	{ 0xC2, "CPU Technology" },
+	{ 0x43, "Ramaxel Technology" },
+	{ 0xC4, "DSP Group" },
+	{ 0x45, "Axis Communications" },
+	{ 0x46, "Legacy Electronics" },
+	{ 0xC7, "Chrontel" },
+	{ 0xC8, "Powerchip Semiconductor" },
+	{ 0x49, "MobilEye Technologies" },
+	{ 0x4A, "Excel Semiconductor" },
+	{ 0xCB, "A-DATA Technology" },
+	{ 0x4C, "VirtualDigm" },
+	{ 0x00, NULL },
+};
+
+int
+ipmi_spd_print(struct ipmi_intf * intf, uint8_t id)
+{
+	struct ipmi_rs * rsp;
+	struct ipmi_rq req;
+	struct fru_info fru;
+	uint8_t spd_data[256], msg_data[4];
+	int len, offset, size;
+
+	msg_data[0] = id;
+
+	memset(&req, 0, sizeof(req));
+	req.msg.netfn = IPMI_NETFN_STORAGE;
+	req.msg.cmd = GET_FRU_INFO;
+	req.msg.data = msg_data;
+	req.msg.data_len = 1;
+
+	rsp = intf->sendrecv(intf, &req);
+	if (rsp == NULL) {
+		printf(" Device not present (No Response)\n");
+		return -1;
+	}
+	if (rsp->ccode > 0) {
+		printf(" Device not present (%s)\n",
+		       val2str(rsp->ccode, completion_code_vals));
+		return -1;
+	}
+
+	fru.size = (rsp->data[1] << 8) | rsp->data[0];
+	fru.access = rsp->data[2] & 0x1;
+
+	lprintf(LOG_DEBUG, "fru.size = %d bytes (accessed by %s)",
+		fru.size, fru.access ? "words" : "bytes");
+
+	if (fru.size < 1) {
+		lprintf(LOG_ERR, " Invalid FRU size %d", fru.size);
+		return -1;
+	}
+
+	memset(&req, 0, sizeof(req));
+	req.msg.netfn = IPMI_NETFN_STORAGE;
+	req.msg.cmd = GET_FRU_DATA;
+	req.msg.data = msg_data;
+	req.msg.data_len = 4;
+
+	offset = 0;
+	memset(spd_data, 0, 256);
+	do {
+		msg_data[0] = id;
+		msg_data[1] = offset;
+		msg_data[2] = 0;
+		msg_data[3] = 32;
+
+		rsp = intf->sendrecv(intf, &req);
+		if (rsp == NULL) {
+			printf(" Device not present (No Response)\n");
+			return -1;
+		}
+		if (rsp->ccode > 0) {
+			printf(" Device not present (%s)\n",
+			       val2str(rsp->ccode, completion_code_vals));
+
+			/* Timeouts are acceptable. No DIMM in the socket */
+			if (rsp->ccode == 0xc3)
+				return 1;
+
+			return -1;
+		}
+
+		len = rsp->data[0];
+		memcpy(&spd_data[offset], rsp->data + 1, len);
+		offset += len;
+	} while (offset < fru.size);
+
+	if (verbose > 1)
+		printbuf(spd_data, offset, "SPD DATA");
+
+	if (offset < 92)
+		return -1; /* we need first 91 bytes to do our thing */
+
+	size = spd_data[5] * (spd_data[31] << 2);
+	printf(" Memory Size           : %d MB\n", size);
+	printf(" Memory Type           : %s\n",
+	       val2str(spd_data[2], spd_memtype_vals));
+	printf(" Voltage Intf          : %s\n",
+	       val2str(spd_data[8], spd_voltage_vals));
+	printf(" Error Detect/Cor      : %s\n",
+	       val2str(spd_data[11], spd_config_vals));
+
+	/* handle jedec table bank continuation values */
+	printf(" Manufacturer          : ");
+	if (spd_data[64] != 0x7f)
+		printf("%s\n",
+		       val2str(spd_data[64], jedec_id1_vals));
+	else {
+		if (spd_data[65] != 0x7f)
+			printf("%s\n",
+			       val2str(spd_data[65], jedec_id2_vals));
+		else {
+			if (spd_data[66] != 0x7f)
+				printf("%s\n",
+				       val2str(spd_data[66], jedec_id3_vals));
+			else {
+				if (spd_data[67] != 0x7f)
+					printf("%s\n",
+					       val2str(spd_data[67],
+						       jedec_id4_vals));
+				else
+					printf("%s\n",
+					       val2str(spd_data[68],
+						       jedec_id5_vals));
+			}
+		}
+	}
+
+	if (spd_data[73]) {
+		char part[19];
+		memcpy(part, spd_data+73, 18);
+		part[18] = 0;
+		printf(" Part Number           : %s\n", part);
+	}
+
+	return 0;
+}

ipmitool/lib/helper.c

@@ -28,36 +28,51 @@
  * PUNITIVE DAMAGES, HOWEVER CAUSED AND REGARDLESS OF THE THEORY OF
  * LIABILITY, ARISING OUT OF THE USE OF OR INABILITY TO USE THIS SOFTWARE,
  * EVEN IF SUN HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
- * 
- * You acknowledge that this software is not designed or intended for use
- * in the design, construction, operation or maintenance of any nuclear
- * facility.
  */
 
+#include <sys/types.h>
+#include <sys/stat.h>
+#include <sys/ioctl.h>  /* For TIOCNOTTY */
+
 #include <stdlib.h>
 #include <stdio.h>
+#include <inttypes.h>
 #include <signal.h>
-#include <ipmitool/helper.h>
-
 #include <string.h>
+#include <strings.h>
+#include <unistd.h>
+#include <fcntl.h>
+#include <errno.h>
 
+#if HAVE_CONFIG_H
+# include <config.h>
+#endif
 
-unsigned long buf2long(unsigned char * buf)
+#ifdef HAVE_PATHS_H
+# include <paths.h>  /* For _PATH_TTY */
+#endif
+
+#include <ipmitool/helper.h>
+#include <ipmitool/log.h>
+
+extern int verbose;
+
+uint32_t buf2long(uint8_t * buf)
 {
-	return (unsigned long)(buf[3] << 24 | buf[2] << 16 | buf[1] << 8 | buf[0]);
+	return (uint32_t)(buf[3] << 24 | buf[2] << 16 | buf[1] << 8 | buf[0]);
 }
 
-unsigned short buf2short(unsigned char * buf)
+uint16_t buf2short(uint8_t * buf)
 {
-	return (unsigned short)(buf[1] << 8 | buf[0]);
+	return (uint16_t)(buf[1] << 8 | buf[0]);
 }
 
-const char * buf2str(unsigned char * buf, int len)
+const char * buf2str(uint8_t * buf, int len)
 {
 	static char str[1024];
 	int i;
 
-	if (!len || len > 1024)
+	if (len <= 0 || len > 1024)
 		return NULL;
 
 	memset(str, 0, 1024);
@@ -70,58 +85,322 @@ const char * buf2str(unsigned char * buf, int len)
 	return (const char *)str;
 }
 
-void printbuf(unsigned char * buf, int len, char * desc)
+void printbuf(const uint8_t * buf, int len, const char * desc)
 {
 	int i;
 
-	if (!len)
+	if (len <= 0)
 		return;
 
-	printf("%s (%d bytes)\n", desc, len);
+	if (verbose < 1)
+		return;
+
+	fprintf(stderr, "%s (%d bytes)\n", desc, len);
 	for (i=0; i<len; i++) {
 		if (((i%16) == 0) && (i != 0))
-			printf("\n");
-		printf(" %2.2x", buf[i]);
+			fprintf(stderr, "\n");
+		fprintf(stderr, " %2.2x", buf[i]);
 	}
-	printf("\n");
+	fprintf(stderr, "\n");
 }
 
-const char * val2str(unsigned char val, const struct valstr *vs)
+const char * val2str(uint16_t val, const struct valstr *vs)
 {
-	static char un_str[16];
-	int i = 0;
+	static char un_str[32];
+	int i;
 
-	while (vs[i].str) {
+	for (i = 0; vs[i].str != NULL; i++) {
 		if (vs[i].val == val)
 			return vs[i].str;
-		i++;
 	}
 
-	memset(un_str, 0, 16);
-	snprintf(un_str, 16, "Unknown (0x%02x)", val);
+	memset(un_str, 0, 32);
+	snprintf(un_str, 32, "Unknown (0x%x)", val);
 
 	return un_str;
 }
 
-void signal_handler(int sig, void * handler)
+uint16_t str2val(const char *str, const struct valstr *vs)
 {
-	struct sigaction act;
+	int i;
 
-	if (!sig || !handler)
-		return;
-
-	memset(&act, 0, sizeof(act));
-	act.sa_handler = handler;
-	act.sa_flags = 0;
-
-	if (sigemptyset(&act.sa_mask) < 0) {
-		psignal(sig, "unable to empty signal set");
-		return;
+	for (i = 0; vs[i].str != NULL; i++) {
+		if (strncasecmp(vs[i].str, str, __maxlen(str, vs[i].str)) == 0)
+			return vs[i].val;
 	}
 
-	if (sigaction(sig, &act, NULL) < 0) {
-		psignal(sig, "unable to register handler");
-		return;
-	}
+	return vs[i].val;
+}
+
+/* print_valstr  -  print value string list to log or stdout
+ *
+ * @vs:		value string list to print
+ * @title:	name of this value string list
+ * @loglevel:	what log level to print, -1 for stdout
+ */
+void
+print_valstr(const struct valstr * vs, const char * title, int loglevel)
+{
+	int i;
+
+	if (vs == NULL)
+		return;
+
+	if (title != NULL) {
+		if (loglevel < 0)
+			printf("\n%s:\n\n", title);
+		else
+			lprintf(loglevel, "\n%s:\n", title);
+	}
+
+	if (loglevel < 0) {
+		printf("  VALUE\tHEX\tSTRING\n");
+		printf("==============================================\n");
+	} else {
+		lprintf(loglevel, "  VAL\tHEX\tSTRING");
+		lprintf(loglevel, "==============================================");
+	}
+
+	for (i = 0; vs[i].str != NULL; i++) {
+		if (loglevel < 0) {
+			if (vs[i].val < 256)
+				printf("  %d\t0x%02x\t%s\n", vs[i].val, vs[i].val, vs[i].str);
+			else
+				printf("  %d\t0x%04x\t%s\n", vs[i].val, vs[i].val, vs[i].str);
+		} else {
+			if (vs[i].val < 256)
+				lprintf(loglevel, "  %d\t0x%02x\t%s", vs[i].val, vs[i].val, vs[i].str);
+			else
+				lprintf(loglevel, "  %d\t0x%04x\t%s", vs[i].val, vs[i].val, vs[i].str);
+		}
+	}
+
+	if (loglevel < 0)
+		printf("\n");
+	else
+		lprintf(loglevel, "");
+}
+
+/* print_valstr_2col  -  print value string list in two columns to log or stdout
+ *
+ * @vs:		value string list to print
+ * @title:	name of this value string list
+ * @loglevel:	what log level to print, -1 for stdout
+ */
+void
+print_valstr_2col(const struct valstr * vs, const char * title, int loglevel)
+{
+	int i;
+
+	if (vs == NULL)
+		return;
+
+	if (title != NULL) {
+		if (loglevel < 0)
+			printf("\n%s:\n\n", title);
+		else
+			lprintf(loglevel, "\n%s:\n", title);
+	}
+
+	for (i = 0; vs[i].str != NULL; i++) {
+		if (vs[i+1].str == NULL) {
+			/* last one */
+			if (loglevel < 0) {
+				printf("  %4d  %-32s\n", vs[i].val, vs[i].str);
+			} else {
+				lprintf(loglevel, "  %4d  %-32s\n", vs[i].val, vs[i].str);
+			}
+		}
+		else {
+			if (loglevel < 0) {
+				printf("  %4d  %-32s    %4d  %-32s\n",
+				       vs[i].val, vs[i].str, vs[i+1].val, vs[i+1].str);
+			} else {
+				lprintf(loglevel, "  %4d  %-32s    %4d  %-32s\n",
+					vs[i].val, vs[i].str, vs[i+1].val, vs[i+1].str);
+			}
+			i++;
+		}
+	}
+
+	if (loglevel < 0)
+		printf("\n");
+	else
+		lprintf(loglevel, "");
+}
+
+/* ipmi_csum  -  calculate an ipmi checksum
+ *
+ * @d:		buffer to check
+ * @s:		position in buffer to start checksum from
+ */
+uint8_t
+ipmi_csum(uint8_t * d, int s)
+{
+	uint8_t c = 0;
+	for (; s > 0; s--, d++)
+		c += *d;
+	return -c;
+}
+
+/* ipmi_open_file  -  safely open a file for reading or writing
+ *
+ * @file:	filename
+ * @rw:		read-write flag, 1=write
+ *
+ * returns pointer to file handler on success
+ * returns NULL on error
+ */
+FILE *
+ipmi_open_file(const char * file, int rw)
+{
+	struct stat st1, st2;
+	FILE * fp;
+
+	/* verify existance */
+	if (lstat(file, &st1) < 0) {
+		if (rw) {
+			/* does not exist, ok to create */
+			fp = fopen(file, "w");
+			if (fp == NULL) {
+				lperror(LOG_ERR, "Unable to open file %s "
+					"for write", file);
+				return NULL;
+			}
+			/* created ok, now return the descriptor */
+			return fp;
+		} else {
+			lprintf(LOG_ERR, "File %s does not exist", file);
+			return NULL;
+		}
+	}
+
+#ifndef ENABLE_FILE_SECURITY
+	if (!rw) {
+		/* on read skip the extra checks */
+		fp = fopen(file, "r");
+		if (fp == NULL) {
+			lperror(LOG_ERR, "Unable to open file %s", file);
+			return NULL;
+		}
+		return fp;
+	}
+#endif
+
+	/* it exists - only regular files, not links */
+	if (S_ISREG(st1.st_mode) == 0) {
+		lprintf(LOG_ERR, "File %s has invalid mode: %d",
+			file, st1.st_mode);
+		return NULL;
+	}
+
+	/* allow only files with 1 link (itself) */
+	if (st1.st_nlink != 1) {
+		lprintf(LOG_ERR, "File %s has invalid link count: %d != 1",
+		       file, (int)st1.st_nlink);
+		return NULL;
+	}
+
+	fp = fopen(file, rw ? "w+" : "r");
+	if (fp == NULL) {
+		lperror(LOG_ERR, "Unable to open file %s", file);
+		return NULL;
+	}
+
+	/* stat again */
+	if (fstat(fileno(fp), &st2) < 0) {
+		lperror(LOG_ERR, "Unable to stat file %s", file);
+		fclose(fp);
+		return NULL;
+	}
+
+	/* verify inode */
+	if (st1.st_ino != st2.st_ino) {
+		lprintf(LOG_ERR, "File %s has invalid inode: %d != %d",
+			file, st1.st_ino, st2.st_ino);
+		fclose(fp);
+		return NULL;
+	}
+
+	/* verify owner */
+	if (st1.st_uid != st2.st_uid) {
+		lprintf(LOG_ERR, "File %s has invalid user id: %d != %d",
+			file, st1.st_uid, st2.st_uid);
+		fclose(fp);
+		return NULL;
+	}
+
+	/* verify inode */
+	if (st2.st_nlink != 1) {
+		lprintf(LOG_ERR, "File %s has invalid link count: %d != 1",
+			file, st2.st_nlink);
+		fclose(fp);
+		return NULL;
+	}
+
+	return fp;
+}
+
+void
+ipmi_start_daemon(void)
+{
+	pid_t pid;
+	int fd;
+#ifdef SIGHUP
+	sigset_t sighup;
+#endif
+
+	/* if we are started from init no need to become daemon */
+	if (getppid() == 1)
+		return;
+
+#ifdef SIGHUP
+	sigemptyset(&sighup);
+	sigaddset(&sighup, SIGHUP);
+	if (sigprocmask(SIG_UNBLOCK, &sighup, NULL) < 0)
+		fprintf(stderr, "ERROR: could not unblock SIGHUP signal\n");
+	signal(SIGHUP, SIG_IGN);
+#endif
+#ifdef SIGTTOU
+	signal(SIGTTOU, SIG_IGN);
+#endif
+#ifdef SIGTTIN
+	signal(SIGTTIN, SIG_IGN);
+#endif
+#ifdef SIGQUIT
+	signal(SIGQUIT, SIG_IGN);
+#endif
+#ifdef SIGTSTP
+	signal(SIGTSTP, SIG_IGN);
+#endif
+
+	pid = (pid_t) fork();
+	if (pid < 0 || pid > 0)
+		exit(0);
+	
+#if defined(SIGTSTP) && defined(TIOCNOTTY)
+	if (setpgid(0, getpid()) == -1)
+		exit(1);
+	if ((fd = open(_PATH_TTY, O_RDWR)) >= 0) {
+		ioctl(fd, TIOCNOTTY, NULL);
+		close(fd);
+	}
+#else
+	if (setpgrp() == -1)
+		exit(1);
+	pid = (pid_t) fork();
+	if (pid < 0 || pid > 0)
+		exit(0);
+#endif
+
+	chdir("/");
+	umask(0);
+
+	for (fd=0; fd<64; fd++)
+		close(fd);
+
+	open("/dev/null", O_RDWR);
+	dup(0);
+	dup(0);
 }
 

ipmitool/lib/ipmi_bmc.c

@@ -1,119 +0,0 @@
-/*
- * Copyright (c) 2003 Sun Microsystems, Inc.  All Rights Reserved.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 
- * Redistribution of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * 
- * Redistribution in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in the
- * documentation and/or other materials provided with the distribution.
- * 
- * Neither the name of Sun Microsystems, Inc. or the names of
- * contributors may be used to endorse or promote products derived
- * from this software without specific prior written permission.
- * 
- * This software is provided "AS IS," without a warranty of any kind.
- * ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND WARRANTIES,
- * INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A
- * PARTICULAR PURPOSE OR NON-INFRINGEMENT, ARE HEREBY EXCLUDED.
- * SUN MICROSYSTEMS, INC. ("SUN") AND ITS LICENSORS SHALL NOT BE LIABLE
- * FOR ANY DAMAGES SUFFERED BY LICENSEE AS A RESULT OF USING, MODIFYING
- * OR DISTRIBUTING THIS SOFTWARE OR ITS DERIVATIVES.  IN NO EVENT WILL
- * SUN OR ITS LICENSORS BE LIABLE FOR ANY LOST REVENUE, PROFIT OR DATA,
- * OR FOR DIRECT, INDIRECT, SPECIAL, CONSEQUENTIAL, INCIDENTAL OR
- * PUNITIVE DAMAGES, HOWEVER CAUSED AND REGARDLESS OF THE THEORY OF
- * LIABILITY, ARISING OUT OF THE USE OF OR INABILITY TO USE THIS SOFTWARE,
- * EVEN IF SUN HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
- * 
- * You acknowledge that this software is not designed or intended for use
- * in the design, construction, operation or maintenance of any nuclear
- * facility.
- */
-
-#include <stdlib.h>
-#include <string.h>
-#include <stdio.h>
-
-#include <ipmitool/helper.h>
-#include <ipmitool/ipmi.h>
-#include <ipmitool/ipmi_bmc.h>
-
-extern int verbose;
-
-const struct valstr completion_code_vals[] = {
-	{ 0x00, "Command completed normally" },
-	{ 0xc0, "Node busy" },
-	{ 0xc1, "Invalid command" },
-	{ 0xc2, "Invalid command on LUN" },
-	{ 0xc3, "Timeout" },
-	{ 0xc4, "Out of space" },
-	{ 0xc5, "Reservation cancelled or invalid" },
-	{ 0xc6, "Request data truncated" },
-	{ 0xc7, "Request data length invalid" },
-	{ 0xc8, "Request data field length limit exceeded" },
-	{ 0xc9, "Parameter out of range" },
-	{ 0xca, "Cannot return number of requested data bytes" },
-	{ 0xcb, "Requested sensor, data, or record not found" },
-	{ 0xcc, "Invalid data field in request" },
-	{ 0xcd, "Command illegal for specified sensor or record type" },
-	{ 0xce, "Command response could not be provided" },
-	{ 0xcf, "Cannot execute duplicated request" },
-	{ 0xd0, "SDR Repository in update mode" },
-	{ 0xd1, "Device firmeware in update mode" },
-	{ 0xd2, "BMC initialization in progress" },
-	{ 0xd3, "Destination unavailable" },
-	{ 0xd4, "Insufficient priviledge level" },
-	{ 0xd5, "Command not supported in present state" },
-	{ 0xff, "Unspecified error" },
-	{ 0x00, NULL }
-};
-
-static int ipmi_bmc_reset(struct ipmi_intf * intf, int cmd)
-{
-	struct ipmi_rs * rsp;
-	struct ipmi_rq req;
-
-	memset(&req, 0, sizeof(req));
-	req.msg.netfn = IPMI_NETFN_APP;
-	req.msg.cmd = cmd;
-	req.msg.data_len = 0;
-
-	rsp = intf->sendrecv(intf, &req);
-	if (!rsp) {
-		printf("Error in BMC Reset Command\n");
-		return -1;
-	}
-	if (rsp->ccode) {
-		printf("BMC Reset Command returned %x\n", rsp->ccode);
-		return -1;
-	}
-
-	return 0;
-}
-
-int ipmi_bmc_main(struct ipmi_intf * intf, int argc, char ** argv)
-{
-	if (!argc || !strncmp(argv[0], "help", 4)) {
-		printf("BMC Commands:  reset\n");
-		return 0;
-	}
-	else if (!strncmp(argv[0], "reset", 5)) {
-		if (argc < 2 || !strncmp(argv[1], "help", 4)) {
-			printf("reset commands: warm, cold\n");
-		}
-		else if (!strncmp(argv[1], "cold", 4)) {
-			ipmi_bmc_reset(intf, BMC_COLD_RESET);
-		}
-		else if (!strncmp(argv[1], "warm", 4)) {
-			ipmi_bmc_reset(intf, BMC_WARM_RESET);
-		}
-		else {
-			printf("reset commands: warm, cold\n");
-		}
-	}
-	return 0;
-}

ipmitool/lib/ipmi_channel.c

@@ -0,0 +1,861 @@
+/* -*-mode: C; indent-tabs-mode: t; -*-
+ * Copyright (c) 2003 Sun Microsystems, Inc.  All Rights Reserved.
+ * 
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 
+ * Redistribution of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 
+ * Redistribution in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * 
+ * Neither the name of Sun Microsystems, Inc. or the names of
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ * 
+ * This software is provided "AS IS," without a warranty of any kind.
+ * ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND WARRANTIES,
+ * INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A
+ * PARTICULAR PURPOSE OR NON-INFRINGEMENT, ARE HEREBY EXCLUDED.
+ * SUN MICROSYSTEMS, INC. ("SUN") AND ITS LICENSORS SHALL NOT BE LIABLE
+ * FOR ANY DAMAGES SUFFERED BY LICENSEE AS A RESULT OF USING, MODIFYING
+ * OR DISTRIBUTING THIS SOFTWARE OR ITS DERIVATIVES.  IN NO EVENT WILL
+ * SUN OR ITS LICENSORS BE LIABLE FOR ANY LOST REVENUE, PROFIT OR DATA,
+ * OR FOR DIRECT, INDIRECT, SPECIAL, CONSEQUENTIAL, INCIDENTAL OR
+ * PUNITIVE DAMAGES, HOWEVER CAUSED AND REGARDLESS OF THE THEORY OF
+ * LIABILITY, ARISING OUT OF THE USE OF OR INABILITY TO USE THIS SOFTWARE,
+ * EVEN IF SUN HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
+ */
+
+#include <stdlib.h>
+#include <stdio.h>
+#include <string.h>
+#include <strings.h>
+#include <sys/types.h>
+#include <sys/socket.h>
+#include <netinet/in.h>
+#include <arpa/inet.h>
+#include <errno.h>
+#include <unistd.h>
+#include <signal.h>
+
+#include <ipmitool/ipmi.h>
+#include <ipmitool/ipmi_intf.h>
+#include <ipmitool/helper.h>
+#include <ipmitool/log.h>
+#include <ipmitool/ipmi_lanp.h>
+#include <ipmitool/ipmi_channel.h>
+#include <ipmitool/ipmi_strings.h>
+#include <ipmitool/ipmi_constants.h>
+
+extern int csv_output;
+extern int verbose;
+
+void printf_channel_usage (void);
+
+/**
+ * ipmi_1_5_authtypes
+ *
+ * Create a string describing the supported authentication types as 
+ * specificed by the parameter n
+ */
+static const char *
+ipmi_1_5_authtypes(uint8_t n)
+{
+	uint32_t i;
+	static char supportedTypes[128];
+
+	bzero(supportedTypes, 128);
+
+	for (i = 0; ipmi_authtype_vals[i].val != 0; i++) {
+		if (n & ipmi_authtype_vals[i].val) {
+			strcat(supportedTypes, ipmi_authtype_vals[i].str);
+			strcat(supportedTypes, " ");
+		}
+	}
+
+	return supportedTypes;
+}
+
+
+
+/**
+ * ipmi_get_channel_auth_cap
+ *
+ * return 0 on success
+ *        -1 on failure
+ */
+int
+ipmi_get_channel_auth_cap(struct ipmi_intf * intf,
+			  uint8_t channel,
+			  uint8_t priv)
+{
+	struct ipmi_rs * rsp;
+	struct ipmi_rq req;
+	struct get_channel_auth_cap_rsp auth_cap;
+	uint8_t msg_data[2];
+
+	msg_data[0] = channel | 0x80; // Ask for IPMI v2 data as well
+	msg_data[1] = priv;
+
+	memset(&req, 0, sizeof(req));
+	req.msg.netfn    = IPMI_NETFN_APP;            // 0x06
+	req.msg.cmd      = IPMI_GET_CHANNEL_AUTH_CAP; // 0x38
+	req.msg.data     = msg_data;
+	req.msg.data_len = 2;
+
+	rsp = intf->sendrecv(intf, &req);
+
+	if ((rsp == NULL) || (rsp->ccode > 0))	{
+		/*
+		 * It's very possible that this failed because we asked for IPMI v2 data
+		 * Ask again, without requesting IPMI v2 data
+		 */
+		msg_data[0] &= 0x7F;
+		
+		rsp = intf->sendrecv(intf, &req);
+		if (rsp == NULL) {
+			lprintf(LOG_ERR, "Unable to Get Channel Authentication Capabilities");
+			return -1;
+		}
+		if (rsp->ccode > 0) {
+			lprintf(LOG_ERR, "Get Channel Authentication Capabilities failed: %s",
+				val2str(rsp->ccode, completion_code_vals));
+			return -1;
+		}
+	}
+
+	memcpy(&auth_cap, rsp->data, sizeof(struct get_channel_auth_cap_rsp));
+
+	printf("Channel number             : %d\n",
+		   auth_cap.channel_number);
+	printf("IPMI v1.5  auth types      : %s\n",
+		   ipmi_1_5_authtypes(auth_cap.enabled_auth_types));
+
+	if (auth_cap.v20_data_available)
+		printf("KG status                  : %s\n",
+			   (auth_cap.kg_status) ? "non-zero" : "default (all zeroes)");
+
+	printf("Per message authentication : %sabled\n",
+		   (auth_cap.per_message_auth) ? "en" : "dis");
+	printf("User level authentication  : %sabled\n",
+		   (auth_cap.user_level_auth) ? "en" : "dis");
+
+	printf("Non-null user names exist  : %s\n",
+		   (auth_cap.non_null_usernames) ? "yes" : "no");
+	printf("Null user names exist      : %s\n",
+		   (auth_cap.null_usernames) ? "yes" : "no");
+	printf("Anonymous login enabled    : %s\n",
+		   (auth_cap.anon_login_enabled) ? "yes" : "no");
+
+	if (auth_cap.v20_data_available) {
+		printf("Channel supports IPMI v1.5 : %s\n",
+			   (auth_cap.ipmiv15_support) ? "yes" : "no");
+		printf("Channel supports IPMI v2.0 : %s\n",
+			   (auth_cap.ipmiv20_support) ? "yes" : "no");
+	}
+
+	/*
+	 * If there is support for an OEM authentication type, there is some
+	 * information.
+	 */
+	if (auth_cap.enabled_auth_types & IPMI_1_5_AUTH_TYPE_BIT_OEM) {
+		printf("IANA Number for OEM        : %d\n",
+			   auth_cap.oem_id[0]      | 
+			   auth_cap.oem_id[1] << 8 | 
+			   auth_cap.oem_id[2] << 16);
+		printf("OEM Auxiliary Data         : 0x%x\n",
+			   auth_cap.oem_aux_data);
+	}
+
+    return 0;
+}
+
+
+
+/**
+ * ipmi_get_channel_info
+ *
+ * returns 0 on success
+ *         -1 on failure
+ *
+ */
+int
+ipmi_get_channel_info(struct ipmi_intf * intf, uint8_t channel)
+{
+	struct ipmi_rs * rsp;
+	struct ipmi_rq req;
+	uint8_t rqdata[2];
+	uint8_t medium;
+	struct get_channel_info_rsp   channel_info;
+	struct get_channel_access_rsp channel_access;
+
+	memset(&req, 0, sizeof(req));
+	req.msg.netfn = IPMI_NETFN_APP;        // 0x06
+	req.msg.cmd   = IPMI_GET_CHANNEL_INFO; // 0x42
+	req.msg.data = &channel;
+	req.msg.data_len = 1;
+
+	rsp = intf->sendrecv(intf, &req);
+	if (rsp == NULL) {
+		lprintf(LOG_ERR, "Unable to Get Channel Info");
+		return -1;
+	}
+	if (rsp->ccode > 0) {
+		lprintf(LOG_ERR, "Get Channel Info failed: %s",
+			val2str(rsp->ccode, completion_code_vals));
+		return -1;
+	}
+
+	memcpy(&channel_info, rsp->data, sizeof(struct get_channel_info_rsp));
+
+	printf("Channel 0x%x info:\n", channel_info.channel_number);
+
+	printf("  Channel Medium Type   : %s\n",
+		   val2str(channel_info.channel_medium, ipmi_channel_medium_vals));
+
+	printf("  Channel Protocol Type : %s\n",
+		   val2str(channel_info.channel_protocol, ipmi_channel_protocol_vals));
+
+	printf("  Session Support       : ");
+	switch (channel_info.session_support) {
+		case 0x0:
+			printf("session-less\n");
+			break;
+		case 0x1:
+			printf("single-session\n");
+			break;
+		case 0x2:
+			printf("multi-session\n");
+			break;
+		case 0x3:
+		default:
+			printf("session-based\n");
+			break;
+	}
+
+	printf("  Active Session Count  : %d\n",
+		   channel_info.active_sessions);
+
+	printf("  Protocol Vendor ID    : %d\n",
+		   channel_info.vendor_id[0]      |
+		   channel_info.vendor_id[1] << 8 |
+		   channel_info.vendor_id[2] << 16);
+
+
+	/* only proceed if this is LAN channel */
+	medium = ipmi_get_channel_medium(intf, channel);
+	if (medium != IPMI_CHANNEL_MEDIUM_LAN &&
+	    medium != IPMI_CHANNEL_MEDIUM_LAN_OTHER) {
+		return 0;
+	}
+
+	memset(&req, 0, sizeof(req));
+	rqdata[0] = channel & 0xf;
+
+	/* get volatile settings */
+
+	rqdata[1] = 0x80; /* 0x80=active */
+	req.msg.netfn = IPMI_NETFN_APP;          // 0x06
+	req.msg.cmd   = IPMI_GET_CHANNEL_ACCESS; // 0x41
+	req.msg.data = rqdata;
+	req.msg.data_len = 2;
+
+	rsp = intf->sendrecv(intf, &req);
+	if (rsp == NULL) {
+		lprintf(LOG_ERR, "Unable to Get Channel Access (volatile)");
+		return -1;
+	}
+	if (rsp->ccode > 0) {
+		lprintf(LOG_ERR, "Get Channel Access (volatile) failed: %s",
+			val2str(rsp->ccode, completion_code_vals));
+		return -1;
+	}
+
+	memcpy(&channel_access, rsp->data, sizeof(struct get_channel_access_rsp));
+
+
+	printf("  Volatile(active) Settings\n");
+	printf("    Alerting            : %sabled\n",
+		   (channel_access.alerting) ? "dis" : "en");
+	printf("    Per-message Auth    : %sabled\n",
+		   (channel_access.per_message_auth) ? "dis" : "en");
+	printf("    User Level Auth     : %sabled\n",
+		   (channel_access.user_level_auth) ? "dis" : "en");
+
+	printf("    Access Mode         : ");
+	switch (channel_access.access_mode) {
+		case 0:
+			printf("disabled\n");
+			break;
+		case 1:
+			printf("pre-boot only\n");
+			break;
+		case 2:
+			printf("always available\n");
+			break;
+		case 3:
+			printf("shared\n");
+			break;
+		default:
+			printf("unknown\n");
+			break;
+	}
+
+	/* get non-volatile settings */
+
+	rqdata[1] = 0x40; /* 0x40=non-volatile */
+	rsp = intf->sendrecv(intf, &req);
+	if (rsp == NULL) {
+		lprintf(LOG_ERR, "Unable to Get Channel Access (non-volatile)");
+		return -1;
+	}
+	if (rsp->ccode > 0) {
+		lprintf(LOG_ERR, "Get Channel Access (non-volatile) failed: %s",
+			val2str(rsp->ccode, completion_code_vals));
+		return -1;
+	}
+
+	memcpy(&channel_access, rsp->data, sizeof(struct get_channel_access_rsp));
+
+	printf("  Non-Volatile Settings\n");
+	printf("    Alerting            : %sabled\n",
+		   (channel_access.alerting) ? "dis" : "en");
+	printf("    Per-message Auth    : %sabled\n",
+		   (channel_access.per_message_auth) ? "dis" : "en");
+	printf("    User Level Auth     : %sabled\n",
+		   (channel_access.user_level_auth) ? "dis" : "en");
+
+	printf("    Access Mode         : ");
+	switch (channel_access.access_mode) {
+		case 0:
+			printf("disabled\n");
+			break;
+		case 1:
+			printf("pre-boot only\n");
+			break;
+		case 2:
+			printf("always available\n");
+			break;
+		case 3:
+			printf("shared\n");
+			break;
+		default:
+			printf("unknown\n");
+			break;
+	}
+
+	return 0;
+}
+
+static int
+ipmi_get_user_access(struct ipmi_intf * intf, uint8_t channel, uint8_t userid)
+{
+	struct ipmi_rs * rsp;
+	struct ipmi_rq req1, req2;
+	uint8_t rqdata[2];
+	struct get_user_access_rsp user_access;
+	int curr_uid, max_uid = 0, init = 1;
+
+	curr_uid = userid ? : 1;
+
+	memset(&req1, 0, sizeof(req1));
+	req1.msg.netfn = IPMI_NETFN_APP;
+	req1.msg.cmd = IPMI_GET_USER_ACCESS;
+	req1.msg.data = rqdata;
+	req1.msg.data_len = 2;
+
+	memset(&req2, 0, sizeof(req2));
+	req2.msg.netfn = IPMI_NETFN_APP;
+	req2.msg.cmd = IPMI_GET_USER_NAME;
+	req2.msg.data = rqdata;
+	req2.msg.data_len = 1;
+
+	do
+	{
+		rqdata[0] = channel & 0xf;
+		rqdata[1] = curr_uid & 0x3f;
+
+		rsp = intf->sendrecv(intf, &req1);
+		if (rsp == NULL) {
+			lprintf(LOG_ERR, "Unable to Get User Access (channel %d id %d)",
+				rqdata[0], rqdata[1]);
+			return -1;
+		}
+		if (rsp->ccode > 0) {
+			lprintf(LOG_ERR, "Get User Access (channel %d id %d) failed: %s",
+				rqdata[0], rqdata[1],
+				val2str(rsp->ccode, completion_code_vals));
+			return -1;
+		}
+
+		memcpy(&user_access, rsp->data, sizeof(struct get_user_access_rsp));
+
+		rqdata[0] = curr_uid & 0x3f;
+
+		rsp = intf->sendrecv(intf, &req2);
+		if (rsp == NULL) {
+			lprintf(LOG_ERR, "Unable to Get User Name (id %d)", rqdata[0]);
+			return -1;
+		}
+		if (rsp->ccode > 0) {
+			lprintf(LOG_ERR, "Get User Name (id %d) failed: %s",
+				rqdata[0], val2str(rsp->ccode, completion_code_vals));
+			return -1;
+		}
+
+		if (init) {
+			printf("Maximum User IDs     : %d\n", user_access.max_user_ids);
+			printf("Enabled User IDs     : %d\n", user_access.enabled_user_ids);
+			max_uid = user_access.max_user_ids;
+			init = 0;
+		}
+
+		printf("\n");
+		printf("User ID              : %d\n", curr_uid);
+		printf("User Name            : %s\n", rsp->data);
+		printf("Fixed Name           : %s\n",
+		       (curr_uid <= user_access.fixed_user_ids) ? "Yes" : "No");
+		printf("Access Available     : %s\n",
+		       (user_access.callin_callback) ? "callback" : "call-in / callback");
+		printf("Link Authentication  : %sabled\n",
+		       (user_access.link_auth) ? "en" : "dis");
+		printf("IPMI Messaging       : %sabled\n",
+		       (user_access.ipmi_messaging) ? "en" : "dis");
+		printf("Privilege Level      : %s\n",
+		       val2str(user_access.privilege_limit, ipmi_privlvl_vals));
+
+		curr_uid ++;
+
+	} while (!userid && curr_uid <= max_uid);
+
+	return 0;
+}
+
+static int
+ipmi_set_user_access(struct ipmi_intf * intf, int argc, char ** argv)
+{
+	uint8_t channel, userid;
+	struct ipmi_rs * rsp;
+	struct ipmi_rq req;
+	uint8_t rqdata[2];
+	struct get_user_access_rsp user_access;
+	struct set_user_access_data set_access;
+	int i;
+
+        if ((argc < 3) || (strncmp(argv[0], "help", 4) == 0)) {
+		printf_channel_usage();
+                return 0;
+        }
+
+	channel = (uint8_t)strtol(argv[0], NULL, 0);
+	userid = (uint8_t)strtol(argv[1], NULL, 0);
+
+	memset(&req, 0, sizeof(req));
+	req.msg.netfn = IPMI_NETFN_APP;
+	req.msg.cmd = IPMI_GET_USER_ACCESS;
+	req.msg.data = rqdata;
+	req.msg.data_len = 2;
+
+	rqdata[0] = channel & 0xf;
+	rqdata[1] = userid & 0x3f;
+
+	rsp = intf->sendrecv(intf, &req);
+	if (rsp == NULL) {
+		lprintf(LOG_ERR, "Unable to Get User Access (channel %d id %d)",
+			rqdata[0], rqdata[1]);
+		return -1;
+	}
+	if (rsp->ccode > 0) {
+		lprintf(LOG_ERR, "Get User Access (channel %d id %d) failed: %s",
+			rqdata[0], rqdata[1],
+			val2str(rsp->ccode, completion_code_vals));
+		return -1;
+	}
+
+	memcpy(&user_access, rsp->data, sizeof(struct get_user_access_rsp));
+
+	memset(&set_access, 0, sizeof(set_access));
+	set_access.change_bits = 1;
+	set_access.callin_callback = user_access.callin_callback;
+	set_access.link_auth = user_access.link_auth;
+	set_access.ipmi_messaging = user_access.ipmi_messaging;
+	set_access.channel = channel;
+	set_access.user_id = userid;
+	set_access.privilege_limit = user_access.privilege_limit;
+	set_access.session_limit = 0;
+
+	for (i = 2; i < argc; i ++)
+	{
+		if (strncmp(argv[i], "callin=", 7) == 0) {
+			set_access.callin_callback = !(strncmp (argv[i]+7, "off", 3));
+		}
+		else if (strncmp(argv[i], "link=", 5) == 0) {
+			set_access.link_auth = strncmp (argv[i]+5, "off", 3);
+		}
+		else if (strncmp(argv[i], "ipmi=", 5) == 0) {
+			set_access.ipmi_messaging = strncmp (argv[i]+5, "off", 3);
+		}
+		else if (strncmp(argv[i], "privilege=", 10) == 0) {
+			set_access.privilege_limit = strtol (argv[i]+10, NULL, 0);
+		}
+		else {
+			printf ("Invalid option: %s\n", argv [i]);
+			return -1;
+		}
+	}
+
+	memset(&req, 0, sizeof(req));
+	req.msg.netfn = IPMI_NETFN_APP;
+	req.msg.cmd = IPMI_SET_USER_ACCESS;
+	req.msg.data = (uint8_t *) &set_access;
+	req.msg.data_len = 4;
+
+	rsp = intf->sendrecv(intf, &req);
+	if (rsp == NULL) {
+		lprintf(LOG_ERR, "Unable to Set User Access (channel %d id %d)",
+			set_access.channel, set_access.user_id);
+		return -1;
+	}
+	if (rsp->ccode > 0) {
+		lprintf(LOG_ERR, "Set User Access (channel %d id %d) failed: %s",
+			set_access.channel, set_access.user_id,
+			val2str(rsp->ccode, completion_code_vals));
+		return -1;
+	}
+
+	return 0;
+}
+
+
+static const char *
+iana_string(uint32_t iana)
+{
+	static char s[10];
+
+	if (iana)
+	{
+		sprintf(s, "%06x", iana);
+		return s;
+	}
+	else
+		return "N/A";
+}
+
+
+static int
+ipmi_get_channel_cipher_suites(struct ipmi_intf * intf,
+			       const char * payload_type,
+			       uint8_t channel)
+{
+	struct ipmi_rs * rsp;
+	struct ipmi_rq req;
+
+	uint8_t  oem_record;
+	uint8_t  rqdata[3];
+	uint32_t iana;
+	uint8_t  auth_alg, integrity_alg, crypt_alg;
+	uint8_t  cipher_suite_id;
+	uint8_t  list_index = 0;
+	uint8_t  cipher_suite_data[1024]; // 0x40 sets * 16 bytes per set
+	uint16_t offset = 0;
+	uint16_t cipher_suite_data_length = 0; // how much was returned, total
+
+	memset(cipher_suite_data, 0, sizeof(cipher_suite_data));
+	
+	memset(&req, 0, sizeof(req));
+	req.msg.netfn = IPMI_NETFN_APP;                 // 0x06
+	req.msg.cmd   = IPMI_GET_CHANNEL_CIPHER_SUITES; // 0x54
+	req.msg.data = rqdata;
+	req.msg.data_len = 3;
+
+	rqdata[0] = channel;
+	rqdata[1] = ((strncmp(payload_type, "ipmi", 4) == 0)? 0: 1);
+	rqdata[2] = 0x80; // Always ask for cipher suite format
+
+	rsp = intf->sendrecv(intf, &req);
+	if (rsp == NULL) {
+		lprintf(LOG_ERR, "Unable to Get Channel Cipher Suites");
+		return -1;
+	}
+	if (rsp->ccode > 0) {
+		lprintf(LOG_ERR, "Get Channel Cipher Suites failed: %s",
+			val2str(rsp->ccode, completion_code_vals));
+		return -1;
+	}
+
+
+	// Grab the returned channel number once.  We assume it's the same
+	// in future calls.
+	if (rsp->data_len >= 1)
+		channel = rsp->data[0];
+		
+
+	while ((rsp->data_len > 1) && (list_index < 0x3F))
+	{
+		//
+		// We got back cipher suite data -- store it.
+		//
+		//printf("copying data to offset %d\n", offset);
+		//printbuf(rsp->data + 1, rsp->data_len - 1, "this is the data");
+		memcpy(cipher_suite_data + offset, rsp->data + 1, rsp->data_len - 1);
+		offset += rsp->data_len - 1;
+		
+		//
+		// Increment our list for the next call
+		//
+		++list_index;
+		rqdata[2] =  (rqdata[2] & 0x80) + list_index; 
+
+		rsp = intf->sendrecv(intf, &req);
+		if (rsp == NULL) {
+			lprintf(LOG_ERR, "Unable to Get Channel Cipher Suites");
+			return -1;
+		}
+		if (rsp->ccode > 0) {
+			lprintf(LOG_ERR, "Get Channel Cipher Suites failed: %s",
+					val2str(rsp->ccode, completion_code_vals));
+			return -1;
+		}
+	}
+
+
+	//
+	// We can chomp on all our data now.
+	//
+	cipher_suite_data_length = offset;
+	offset = 0;
+
+	if (! csv_output)
+		printf("ID   IANA    Auth Alg        Integrity Alg   Confidentiality Alg\n");
+	
+	while (offset < cipher_suite_data_length)
+	{
+		if (cipher_suite_data[offset++] == 0xC0)
+		{
+			oem_record = 0; // standard type
+			iana       = 0;
+
+			// Verify that we have at least a full record left
+			if ((cipher_suite_data_length - offset) < 4) // id + 3 algs
+			{
+				lprintf(LOG_ERR, "Incomplete data record in cipher suite data");
+				return -1;
+			}
+			
+			cipher_suite_id = cipher_suite_data[offset++];
+				
+		}
+		else if (cipher_suite_data[offset++] == 0xC1)
+		{
+			oem_record = 1; // OEM record type    
+
+			// Verify that we have at least a full record left
+			if ((cipher_suite_data_length - offset) < 4) // id + iana + 3 algs
+			{
+				lprintf(LOG_ERR, "Incomplete data record in cipher suite data");
+				return -1;
+			}
+
+			cipher_suite_id = cipher_suite_data[offset++];
+
+			//
+			// Grab the IANA
+			//
+			iana =
+				cipher_suite_data[offset]            | 
+				(cipher_suite_data[offset + 1] << 8) | 
+				(cipher_suite_data[offset + 2] << 16);
+			offset += 3;
+		}
+		else
+		{
+			lprintf(LOG_ERR, "Bad start of record byte in cipher suite data");
+			return -1;
+		}
+
+		//
+		// Grab the algorithms for this cipher suite.  I guess we can't be
+		// sure of what order they'll come in.  Also, I suppose we default
+		// to the NONE algorithm if one were absent.  This part of the spec is
+		// poorly written -- I have read the errata document.  For now, I'm only
+		// allowing one algorithm per type (auth, integrity, crypt) because I
+		// don't I understand how it could be otherwise.
+		//
+		auth_alg      = IPMI_AUTH_RAKP_NONE;
+		integrity_alg = IPMI_INTEGRITY_NONE;
+		crypt_alg     = IPMI_CRYPT_NONE;
+		
+		while (((cipher_suite_data[offset] & 0xC0) != 0xC0) &&
+			   ((cipher_suite_data_length - offset) > 0))
+		{
+			switch (cipher_suite_data[offset] & 0xC0)
+			{
+			case 0x00:
+				// Authentication algorithm specifier
+				auth_alg = cipher_suite_data[offset++] & 0x3F;
+				break;
+			case 0x40:
+				// Interity algorithm specifier
+				integrity_alg = cipher_suite_data[offset++] & 0x3F;
+				break;
+			case 0x80:
+				// Confidentiality algorithm specifier
+				crypt_alg = cipher_suite_data[offset++] & 0x3F;
+				break;
+			}
+		}
+
+
+		//
+		// We have everything we need to spit out a cipher suite record
+		//
+		printf((csv_output? "%d,%s,%s,%s,%s\n" :
+			"%-4d %-7s %-15s %-15s %-15s\n"),
+		       cipher_suite_id,
+		       iana_string(iana),
+		       val2str(auth_alg, ipmi_auth_algorithms),
+		       val2str(integrity_alg, ipmi_integrity_algorithms),
+		       val2str(crypt_alg, ipmi_encryption_algorithms));
+	}
+	
+	
+	return 0;
+}
+
+
+
+uint8_t
+ipmi_get_channel_medium(struct ipmi_intf * intf, uint8_t channel)
+{
+	struct ipmi_rs * rsp;
+	struct ipmi_rq req;
+	struct get_channel_info_rsp info;
+
+	memset(&req, 0, sizeof(req));
+	req.msg.netfn = IPMI_NETFN_APP;
+	req.msg.cmd = IPMI_GET_CHANNEL_INFO;
+	req.msg.data = &channel;
+	req.msg.data_len = 1;
+
+	rsp = intf->sendrecv(intf, &req);
+	if (rsp == NULL) {
+		lprintf(LOG_ERR, "Get Channel Info command failed");
+		return -1;
+	}
+	if (rsp->ccode > 0) {
+		if (rsp->ccode == 0xcc)
+			return IPMI_CHANNEL_MEDIUM_RESERVED;
+		lprintf(LOG_INFO, "Get Channel Info command failed: %s",
+		       val2str(rsp->ccode, completion_code_vals));
+		return IPMI_CHANNEL_MEDIUM_RESERVED;
+	}
+
+	memcpy(&info, rsp->data, sizeof(struct get_channel_info_rsp));
+
+	lprintf(LOG_DEBUG, "Channel type: %s",
+		val2str(info.channel_medium, ipmi_channel_medium_vals));
+
+	return info.channel_medium;
+}
+
+uint8_t
+ipmi_current_channel_medium(struct ipmi_intf * intf)
+{
+	return ipmi_get_channel_medium(intf, 0xE);
+}
+
+void
+printf_channel_usage()
+{
+	lprintf(LOG_NOTICE, "Channel Commands: authcap   <channel number> <max privilege>");
+	lprintf(LOG_NOTICE, "                  getaccess <channel number> [user id]");
+	lprintf(LOG_NOTICE, "                  setaccess <channel number> "
+		"<user id> [callin=on|off] [ipmi=on|off] [link=on|off] [privilege=level]");
+	lprintf(LOG_NOTICE, "                  info      [channel number]");
+	lprintf(LOG_NOTICE, "                  getciphers <ipmi | sol> [channel]\n");
+	lprintf(LOG_NOTICE, "Possible privilege levels are:");
+	lprintf(LOG_NOTICE, "   1   Callback level");
+	lprintf(LOG_NOTICE, "   2   User level");
+	lprintf(LOG_NOTICE, "   3   Operator level");
+	lprintf(LOG_NOTICE, "   4   Administrator level");
+	lprintf(LOG_NOTICE, "   5   OEM Proprietary level");
+	lprintf(LOG_NOTICE, "  15   No access");
+}
+
+
+int
+ipmi_channel_main(struct ipmi_intf * intf, int argc, char ** argv)
+{
+	int retval = 0;
+
+	if ((argc == 0) || (strncmp(argv[0], "help", 4) == 0))
+	{
+		printf_channel_usage();
+	}
+	else if (strncmp(argv[0], "authcap", 7) == 0)
+	{
+		if (argc != 3)
+			printf_channel_usage();
+		else
+			retval = ipmi_get_channel_auth_cap(intf,
+                                               (uint8_t)strtol(argv[1], NULL, 0),
+                                               (uint8_t)strtol(argv[2], NULL, 0));
+	}
+	else if (strncmp(argv[0], "getaccess", 10) == 0)
+	{
+		if ((argc < 2) || (argc > 3))
+			printf_channel_usage();
+		else {
+			uint8_t ch = (uint8_t)strtol(argv[1], NULL, 0);
+			uint8_t id = 0;
+			if (argc == 3)
+				id = (uint8_t)strtol(argv[2], NULL, 0);
+			retval = ipmi_get_user_access(intf, ch, id);
+		}
+	}
+	else if (strncmp(argv[0], "setaccess", 9) == 0)
+	{
+		retval = ipmi_set_user_access(intf, argc-1, &(argv[1]));
+	}
+	else if (strncmp(argv[0], "info", 4) == 0)
+	{
+		if (argc > 2)
+			printf_channel_usage();
+		else {
+			uint8_t ch = 0xe;
+			if (argc == 2)
+				ch = (uint8_t)strtol(argv[1], NULL, 0);
+			retval = ipmi_get_channel_info(intf, ch);
+		}
+	}
+
+	// it channel getciphers <ipmi | sol> [channel] 
+	else if (strncmp(argv[0], "getciphers", 10) == 0)
+	{
+		if ((argc < 2) || (argc > 3)  ||
+		    (strncmp(argv[1], "ipmi", 4) && strncmp(argv[1], "sol",  3)))
+			printf_channel_usage();
+		else
+		{
+			uint8_t ch = 0xe;
+			if (argc == 4)
+				ch = (uint8_t)strtol(argv[2], NULL, 0);
+			retval = ipmi_get_channel_cipher_suites(intf,
+								argv[1], // ipmi | sol
+								ch);
+		}
+	}
+	else
+	{
+		printf("Invalid CHANNEL command: %s\n", argv[0]);
+		printf_channel_usage();
+		retval = -1;
+	}
+
+	return retval;
+}
+

ipmitool/lib/ipmi_chassis.c

@@ -28,10 +28,6 @@
  * PUNITIVE DAMAGES, HOWEVER CAUSED AND REGARDLESS OF THE THEORY OF
  * LIABILITY, ARISING OUT OF THE USE OF OR INABILITY TO USE THIS SOFTWARE,
  * EVEN IF SUN HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
- * 
- * You acknowledge that this software is not designed or intended for use
- * in the design, construction, operation or maintenance of any nuclear
- * facility.
  */
 
 #include <stdlib.h>
@@ -40,11 +36,15 @@
 
 #include <ipmitool/helper.h>
 #include <ipmitool/ipmi.h>
+#include <ipmitool/log.h>
+#include <ipmitool/ipmi_intf.h>
+#include <ipmitool/ipmi_strings.h>
 #include <ipmitool/ipmi_chassis.h>
 
 extern int verbose;
 
-static int ipmi_chassis_power_status(struct ipmi_intf * intf)
+int
+ipmi_chassis_power_status(struct ipmi_intf * intf)
 {
 	struct ipmi_rs * rsp;
 	struct ipmi_rq req;
@@ -55,28 +55,36 @@ static int ipmi_chassis_power_status(struct ipmi_intf * intf)
 	req.msg.data_len = 0;
 
 	rsp = intf->sendrecv(intf, &req);
-	if (!rsp || rsp->ccode) {
-		printf("error in Chassis Status Command\n");
-		return 0;
+	if (rsp == NULL) {
+		lprintf(LOG_ERR, "Unable to get Chassis Power Status");
+		return -1;
+	}
+	if (rsp->ccode > 0) {
+		lprintf(LOG_ERR, "Get Chassis Power Status failed: %s",
+			val2str(rsp->ccode, completion_code_vals));
+		return -1;
 	}
 
-	printf("Chassis Power is %s\n", (rsp->data[0] & 0x1) ? "on" : "off");
-
-	return rsp->data[0] & 0x1;
+	return rsp->data[0] & 1;
 }
 
-static const struct valstr ipmi_chassis_power_control_vals[] = {
-	{ 0x00, "Down/Off" },
-	{ 0x01, "Up/On" },
-	{ 0x02, "Cycle" },
-	{ 0x03, "Reset" },
-	{ 0x04, "Pulse" },
-	{ 0x05, "Soft" },
-	{ 0x00, NULL },
-};
-
-static void ipmi_chassis_power_control(struct ipmi_intf * intf, unsigned char ctl)
+static int
+ipmi_chassis_print_power_status(struct ipmi_intf * intf)
 {
+	int ps = ipmi_chassis_power_status(intf);
+
+	if (ps < 0)
+		return -1;
+
+	printf("Chassis Power is %s\n", ps ? "on" : "off");
+
+	return 0;
+}
+
+int
+ipmi_chassis_power_control(struct ipmi_intf * intf, uint8_t ctl)
+{
+	struct ipmi_rs * rsp;
 	struct ipmi_rq req;
 
 	memset(&req, 0, sizeof(req));
@@ -85,62 +93,128 @@ static void ipmi_chassis_power_control(struct ipmi_intf * intf, unsigned char ct
 	req.msg.data = &ctl;
 	req.msg.data_len = 1;
 
+	rsp = intf->sendrecv(intf, &req);
+	if (rsp == NULL) {
+		lprintf(LOG_ERR, "Unable to set Chassis Power Control to %s",
+			val2str(ctl, ipmi_chassis_power_control_vals));
+		return -1;
+	}
+	if (rsp->ccode > 0) {
+		lprintf(LOG_ERR, "Set Chassis Power Control to %s failed: %s",
+			val2str(ctl, ipmi_chassis_power_control_vals),
+			val2str(rsp->ccode, completion_code_vals));
+		return -1;
+	}
+
 	printf("Chassis Power Control: %s\n",
 	       val2str(ctl, ipmi_chassis_power_control_vals));
 
-	intf->sendrecv(intf, &req);
+#if 0	/* this can cause sessions to hang around after power commands */
+	/* sessions often get lost when changing chassis power */
 	intf->abort = 1;
+#endif
+
+	return 0;
 }
 
-static void ipmi_chassis_identify(struct ipmi_intf * intf, char * arg)
+static int
+ipmi_chassis_identify(struct ipmi_intf * intf, char * arg)
 {
 	struct ipmi_rq req;
+	struct ipmi_rs * rsp;
+
+	struct {
+		uint8_t interval;
+		uint8_t force_on;
+	} identify_data;
 
 	memset(&req, 0, sizeof(req));
 	req.msg.netfn = IPMI_NETFN_CHASSIS;
 	req.msg.cmd = 0x4;
 
-	printf("Chassis identify interval: ");
-
-	if (arg) {
-		unsigned char interval = (unsigned char)atoi(arg);
-
-		req.msg.data = &interval;
-		req.msg.data_len = 1;
-
-		if (interval)
-			printf("%d seconds\n", interval);
-		else
-			printf("off\n");
-	} else {
-		printf("default (15 seconds)\n");
+	if (arg != NULL) {
+		if (strncmp(arg, "force", 5) == 0) {
+			identify_data.interval = 0;
+			identify_data.force_on = 1;
+		} else {
+			identify_data.interval = (uint8_t)atoi(arg);
+			identify_data.force_on = 0;
+		}
+		req.msg.data = (uint8_t *)&identify_data;
+		/* The Force Identify On byte is optional and not
+		 * supported by all devices-- if force is not specified,
+		 * we pass only one data byte; if specified, we pass two
+		 * data bytes and check for an error completion code
+		 */	
+		req.msg.data_len = (identify_data.force_on) ? 2 : 1;
 	}
 
-	intf->sendrecv(intf, &req);
+	rsp = intf->sendrecv(intf, &req);
+	if (rsp == NULL) {
+		lprintf(LOG_ERR, "Unable to set Chassis Identify");
+		return -1;
+	}
+	if (rsp->ccode > 0) {
+		lprintf(LOG_ERR, "Set Chassis Identify failed: %s",
+			val2str(rsp->ccode, completion_code_vals));
+		if (identify_data.force_on != 0) {
+			/* Intel SE7501WV2 F/W 1.2 returns CC 0xC7, but
+			 * the IPMI v1.5 spec does not standardize a CC
+			 * if unsupported, so we warn
+			 */
+			lprintf(LOG_WARNING, "Chassis may not support Force Identify On\n");
+		}
+		return -1;
+	}
+
+	printf("Chassis identify interval: ");
+	if (arg == NULL) {
+		printf("default (15 seconds)\n");
+	} else {
+		if (identify_data.force_on != 0) {
+			printf("indefinate\n");
+		} else {
+			if (identify_data.interval == 0)
+				printf("off\n");
+			else
+				printf("%i seconds\n", identify_data.interval);
+		}
+	}
+	return 0;
 }
 
-static void ipmi_chassis_poh(struct ipmi_intf * intf)
+static int
+ipmi_chassis_poh(struct ipmi_intf * intf)
 {
 	struct ipmi_rs * rsp;
 	struct ipmi_rq req;
-	unsigned long count;
+	uint32_t count;
 
 	memset(&req, 0, sizeof(req));
 	req.msg.netfn = IPMI_NETFN_CHASSIS;
 	req.msg.cmd = 0xf;
 
 	rsp = intf->sendrecv(intf, &req);
-
-	if (!rsp || rsp->ccode)
-		return;
+	if (rsp == NULL) {
+		lprintf(LOG_ERR, "Unable to get Chassis Power-On-Hours");
+		return -1;
+	}
+	if (rsp->ccode > 0) {
+		lprintf(LOG_ERR, "Get Chassis Power-On-Hours failed: %s",
+			val2str(rsp->ccode, completion_code_vals));
+		return -1;
+	}
 
 	memcpy(&count, rsp->data+1, 4);
 
 	printf("POH Counter  : %li hours total (%li days, %li hours)\n",
-	       count, (unsigned long)(count / 24), (unsigned long)(count % 24));
+	       (long)count, (long)(count / 24), (long)(count % 24));
+
+	return 0;
 }
 
-static void ipmi_chassis_restart_cause(struct ipmi_intf * intf)
+static int
+ipmi_chassis_restart_cause(struct ipmi_intf * intf)
 {
 	struct ipmi_rs * rsp;
 	struct ipmi_rq req;
@@ -150,9 +224,15 @@ static void ipmi_chassis_restart_cause(struct ipmi_intf * intf)
 	req.msg.cmd = 0x7;
 
 	rsp = intf->sendrecv(intf, &req);
-
-	if (!rsp || rsp->ccode)
-		return;
+	if (rsp == NULL) {
+		lprintf(LOG_ERR, "Unable to get Chassis Restart Cause");
+		return -1;
+	}
+	if (rsp->ccode > 0) {
+		lprintf(LOG_ERR, "Get Chassis Restart Cause failed: %s",
+			val2str(rsp->ccode, completion_code_vals));
+		return -1;
+	}
 
 	printf("System restart cause: ");
 
@@ -188,11 +268,14 @@ static void ipmi_chassis_restart_cause(struct ipmi_intf * intf)
 		printf("power-cycle via PEF\n");
 		break;
 	default:
-		printf("error!\n");
+		printf("invalid\n");
 	}
+
+	return 0;
 }
 
-static void ipmi_chassis_status(struct ipmi_intf * intf)
+static int
+ipmi_chassis_status(struct ipmi_intf * intf)
 {
 	struct ipmi_rs * rsp;
 	struct ipmi_rq req;
@@ -202,8 +285,15 @@ static void ipmi_chassis_status(struct ipmi_intf * intf)
 	req.msg.cmd = 0x1;
 
 	rsp = intf->sendrecv(intf, &req);
-	if (!rsp || rsp->ccode)
-		return;
+	if (rsp == NULL) {
+		lprintf(LOG_ERR, "Error sending Chassis Status command");
+		return -1;
+	}
+	if (rsp->ccode > 0) {
+		lprintf(LOG_ERR, "Error sending Chassis Status command: %s",
+			val2str(rsp->ccode, completion_code_vals));
+		return -1;
+	}
 
 	/* byte 1 */
 	printf("System Power         : %s\n", (rsp->data[0] & 0x1) ? "on" : "off");
@@ -246,13 +336,101 @@ static void ipmi_chassis_status(struct ipmi_intf * intf)
 	printf("Front-Panel Lockout  : %s\n", (rsp->data[2] & 0x2) ? "active" : "inactive");
 	printf("Drive Fault          : %s\n", (rsp->data[2] & 0x4) ? "true" : "false");
 	printf("Cooling/Fan Fault    : %s\n", (rsp->data[2] & 0x8) ? "true" : "false");
+
+        if (rsp->data_len > 3) {
+		/* optional byte 4 */
+		if (rsp->data[3] == 0) {
+			printf("Front Panel Control  : none\n");
+		} else {
+			printf("Sleep Button Disable : %s\n", (rsp->data[3] & 0x80) ? "allowed" : "not allowed");
+			printf("Diag Button Disable  : %s\n", (rsp->data[3] & 0x40) ? "allowed" : "not allowed");
+			printf("Reset Button Disable : %s\n", (rsp->data[3] & 0x20) ? "allowed" : "not allowed");
+			printf("Power Button Disable : %s\n", (rsp->data[3] & 0x10) ? "allowed" : "not allowed");
+			printf("Sleep Button Disabled: %s\n", (rsp->data[3] & 0x80) ? "true" : "false");
+			printf("Diag Button Disabled : %s\n", (rsp->data[3] & 0x40) ? "true" : "false");
+			printf("Reset Button Disabled: %s\n", (rsp->data[3] & 0x20) ? "true" : "false");
+			printf("Power Button Disabled: %s\n", (rsp->data[3] & 0x10) ? "true" : "false");
+		}
+        }
+
+	return 0;
 }
 
-static void ipmi_chassis_set_bootparam(struct ipmi_intf * intf, unsigned char param, unsigned char * data, int len)
+
+static int
+ipmi_chassis_selftest(struct ipmi_intf * intf)
 {
 	struct ipmi_rs * rsp;
 	struct ipmi_rq req;
-	unsigned char msg_data[16];
+
+	memset(&req, 0, sizeof(req));
+	req.msg.netfn = IPMI_NETFN_APP;
+	req.msg.cmd = 0x4;
+
+	rsp = intf->sendrecv(intf, &req);
+	if (rsp == NULL) {
+		lprintf(LOG_ERR, "Error sending Get Self Test command");
+		return -1;
+	}
+	if (rsp->ccode > 0) {
+		lprintf(LOG_ERR, "Error sending Get Self Test command: %s",
+			val2str(rsp->ccode, completion_code_vals));
+		return -1;
+	}
+
+	printf("Self Test Results    : ");
+	switch (rsp->data[0]) {
+	case 0x55:
+		printf("passed\n");
+		break;
+
+	case 0x56:
+		printf("not implemented\n");
+		break;
+
+	case 0x57:
+	{
+		int i;
+		const struct valstr broken_dev_vals[] = {
+			{ 0, "firmware corrupted" },
+			{ 1, "boot block corrupted" },
+			{ 2, "FRU Internal Use Area corrupted" },
+			{ 3, "SDR Repository empty" },
+			{ 4, "IPMB not responding" },
+			{ 5, "cannot access BMC FRU" },
+			{ 6, "cannot access SDR Repository" },
+			{ 7, "cannot access SEL Device" },
+			{ 0xff, NULL },
+		};
+		printf("device error\n");
+		for (i=0; i<8; i++) {
+			if (rsp->data[1] & (1<<i)) {
+				printf("                       [%s]\n",
+				       val2str(i, broken_dev_vals));
+			}
+		}
+	}
+	break;
+
+	case 0x58:
+		printf("Fatal hardware error: %02xh\n", rsp->data[1]);
+		break;
+
+	default:
+		printf("Device-specific failure %02xh:%02xh\n",
+		       rsp->data[0], rsp->data[1]);
+		break;
+	}
+
+	return 0;
+}
+
+static int
+ipmi_chassis_set_bootparam(struct ipmi_intf * intf, uint8_t param, uint8_t * data, int len)
+{
+	struct ipmi_rs * rsp;
+	struct ipmi_rq req;
+	uint8_t msg_data[16];
 
 	memset(msg_data, 0, 16);
 	msg_data[0] = param & 0x7f;
@@ -265,26 +443,33 @@ static void ipmi_chassis_set_bootparam(struct ipmi_intf * intf, unsigned char pa
 	req.msg.data_len = len + 1;
 
 	rsp = intf->sendrecv(intf, &req);
-	if (!rsp || rsp->ccode) {
-		printf("Error setting Chassis Boot Parameter %d\n", param);
-		return;
+	if (rsp == NULL) {
+		lprintf(LOG_ERR, "Error setting Chassis Boot Parameter %d", param);
+		return -1;
+	}
+	if (rsp->ccode > 0) {
+		lprintf(LOG_ERR, "Set Chassis Boot Parameter %d failed: %s",
+			param, val2str(rsp->ccode, completion_code_vals));
+		return -1;
 	}
 
-	printf("Chassis Set Boot Param %d to %s\n", param, data);
+	lprintf(LOG_DEBUG, "Chassis Set Boot Parameter %d to %s", param, buf2str(data, len));
+	return 0;
 }
 
-static void ipmi_chassis_get_bootparam(struct ipmi_intf * intf, char * arg)
+static int
+ipmi_chassis_get_bootparam(struct ipmi_intf * intf, char * arg)
 {
 	struct ipmi_rs * rsp;
 	struct ipmi_rq req;
-	unsigned char msg_data[3];
+	uint8_t msg_data[3];
 
-	if (!arg)
-		return;
+	if (arg == NULL)
+		return -1;
 
 	memset(msg_data, 0, 3);
 
-	msg_data[0] = (unsigned char)atoi(arg) & 0x7f;
+	msg_data[0] = (uint8_t)atoi(arg) & 0x7f;
 	msg_data[1] = 0;
 	msg_data[2] = 0;
 
@@ -295,8 +480,15 @@ static void ipmi_chassis_get_bootparam(struct ipmi_intf * intf, char * arg)
 	req.msg.data_len = 3;
 
 	rsp = intf->sendrecv(intf, &req);
-	if (!rsp || rsp->ccode)
-		return;
+	if (rsp == NULL) {
+		lprintf(LOG_ERR, "Error Getting Chassis Boot Parameter %s", arg);
+		return -1;
+	}
+	if (rsp->ccode > 0) {
+		lprintf(LOG_ERR, "Get Chassis Boot Parameter %s failed: %s",
+			arg, val2str(rsp->ccode, completion_code_vals));
+		return -1;
+	}
 
 	if (verbose > 2)
 		printbuf(rsp->data, rsp->data_len, "Boot Option");
@@ -305,52 +497,71 @@ static void ipmi_chassis_get_bootparam(struct ipmi_intf * intf, char * arg)
 	printf("Boot parameter %d is %s\n", rsp->data[1] & 0x7f,
 	       (rsp->data[1] & 0x80) ? "invalid/locked" : "valid/unlocked");
 	printf("Boot parameter data: %s\n", buf2str(rsp->data+2, rsp->data_len - 2));
+
+	return 0;
 }
 
-static void ipmi_chassis_set_bootflag(struct ipmi_intf * intf, char * arg)
+static int
+ipmi_chassis_set_bootdev(struct ipmi_intf * intf, char * arg, int clearcmos)
 {
-	unsigned char flags[5];
+	uint8_t flags[5];
+	int rc = 0;
 
-	if (!arg) {
-		printf("Error: no bootflag argument supplied\n");
-		return;
-	}
+	memset(flags, 0, 5);
+	flags[0] = 0x01;
+	flags[1] = 0x01;
+	rc = ipmi_chassis_set_bootparam(intf, 4, flags, 2);
+	if (rc < 0)
+		return -1;
 
-	if (!strncmp(arg, "force_pxe", 9)) {
-		flags[1] = 0x04; // 00000100
-	}
-	else if (!strncmp(arg, "force_disk", 10)) {
-		flags[1] = 0x08; // 00001000
-	}
-	else if (!strncmp(arg, "force_diag", 10)) {
-		flags[1] = 0x10; // 00010000
-	}
-	else if (!strncmp(arg, "force_cdrom", 11)) {
-		flags[1] = 0x14; // 00010100
-	}
-	else if (!strncmp(arg, "force_floppy", 12)) {
-		flags[1] = 0x3c; // 00111100
-	}
+	memset(flags, 0, 5);
+	if (arg == NULL)
+		flags[1] = 0x00;
+	else if (strncmp(arg, "none", 4) == 0)
+		flags[1] = 0x00;
+	else if (strncmp(arg, "pxe", 3) == 0 ||
+		 strncmp(arg, "force_pxe", 9) == 0)
+		flags[1] = 0x04;
+	else if (strncmp(arg, "disk", 4) == 0 ||
+		 strncmp(arg, "force_disk", 10) == 0)
+		flags[1] = 0x08;
+	else if (strncmp(arg, "safe", 4) == 0 ||
+		 strncmp(arg, "force_safe", 10) == 0)
+		flags[1] = 0x0c;
+	else if (strncmp(arg, "diag", 4) == 0 ||
+		 strncmp(arg, "force_diag", 10) == 0)
+		flags[1] = 0x10;
+	else if (strncmp(arg, "cdrom", 5) == 0 ||
+		 strncmp(arg, "force_cdrom", 11) == 0)
+		flags[1] = 0x14;
+	else if (strncmp(arg, "floppy", 6) == 0 ||
+		 strncmp(arg, "force_floppy", 12) == 0)
+		flags[1] = 0x3c;
+	else if (strncmp(arg, "bios", 4) == 0 ||
+		 strncmp(arg, "force_bios", 10) == 0)
+		flags[1] = 0x18;
 	else {
-		printf("Invalid bootflag: %s\n", arg);
-		return;
+		lprintf(LOG_ERR, "Invalid argument: %s", arg);
+		return -1;
 	}
 
-	flags[0] = 0x80;	/* set flag valid bit */
-	ipmi_chassis_set_bootparam(intf, 5, flags, 5);
+	if (clearcmos)
+		flags[1] |= 0x80;
 
-	flags[0] = 0x08;	/* don't automatically clear boot flag valid bit in 60 seconds */
-	ipmi_chassis_set_bootparam(intf, 3, flags, 1);
+	/* set flag valid bit */
+	flags[0] = 0x80;
+	rc = ipmi_chassis_set_bootparam(intf, 5, flags, 5);
+	if (rc == 0)
+		printf("Set Boot Device to %s\n", arg);
+	return rc;
 }
 
-static void ipmi_chassis_power_policy(struct ipmi_intf * intf, unsigned char policy)
+static int
+ipmi_chassis_power_policy(struct ipmi_intf * intf, uint8_t policy)
 {
 	struct ipmi_rs * rsp;
 	struct ipmi_rq req;
 
-	if (!policy)
-		return;
-
 	memset(&req, 0, sizeof(req));
 	req.msg.netfn = IPMI_NETFN_CHASSIS;
 	req.msg.cmd = 0x6;
@@ -358,8 +569,15 @@ static void ipmi_chassis_power_policy(struct ipmi_intf * intf, unsigned char pol
 	req.msg.data_len = 1;
 
 	rsp = intf->sendrecv(intf, &req);
-	if (!rsp || rsp->ccode)
-		return;
+	if (rsp == NULL) {
+		lprintf(LOG_ERR, "Error in Power Restore Policy command");
+		return -1;
+	}
+	if (rsp->ccode > 0) {
+		lprintf(LOG_ERR, "Power Restore Policy command failed: %s",
+			val2str(rsp->ccode, completion_code_vals));
+		return -1;
+	}
 
 	if (policy == IPMI_CHASSIS_POLICY_NO_CHANGE) {
 		printf("Supported chassis power policy:  ");
@@ -387,120 +605,187 @@ static void ipmi_chassis_power_policy(struct ipmi_intf * intf, unsigned char pol
 			printf("unknown\n");
 		}
 	}
+	return 0;
 }
 
-int ipmi_chassis_main(struct ipmi_intf * intf, int argc, char ** argv)
+int
+ipmi_power_main(struct ipmi_intf * intf, int argc, char ** argv)
 {
-	if (!argc || !strncmp(argv[0], "help", 4)) {
-		printf("Chassis Commands:  status, power, identify, policy, restart_cause, poh\n");
+	int rc = 0;
+	uint8_t ctl = 0;
+
+	if ((argc < 1) || (strncmp(argv[0], "help", 4) == 0)) {
+		lprintf(LOG_NOTICE, "chassis power Commands: status, on, off, cycle, reset, diag, soft");
 		return 0;
 	}
-	else if (!strncmp(argv[0], "status", 6)) {
-		ipmi_chassis_status(intf);
+	if (strncmp(argv[0], "status", 6) == 0) {
+		rc = ipmi_chassis_print_power_status(intf);
+		return rc;
+	}
+	if ((strncmp(argv[0], "up", 2) == 0) || (strncmp(argv[0], "on", 2) == 0))
+		ctl = IPMI_CHASSIS_CTL_POWER_UP;
+	else if ((strncmp(argv[0], "down", 4) == 0) || (strncmp(argv[0], "off", 3) == 0))
+		ctl = IPMI_CHASSIS_CTL_POWER_DOWN;
+	else if (strncmp(argv[0], "cycle", 5) == 0)
+		ctl = IPMI_CHASSIS_CTL_POWER_CYCLE;
+	else if (strncmp(argv[0], "reset", 5) == 0)
+		ctl = IPMI_CHASSIS_CTL_HARD_RESET;
+	else if (strncmp(argv[0], "diag", 4) == 0)
+		ctl = IPMI_CHASSIS_CTL_PULSE_DIAG;
+	else if ((strncmp(argv[0], "acpi", 4) == 0) || (strncmp(argv[0], "soft", 4) == 0))
+		ctl = IPMI_CHASSIS_CTL_ACPI_SOFT;
+	else {
+		lprintf(LOG_ERR, "Invalid chassis power command: %s", argv[0]);
+		return -1;
 	}
-	else if (!strncmp(argv[0], "power", 5)) {
-		unsigned char ctl = 0;
 
-		if (argc < 2 || !strncmp(argv[1], "help", 4)) {
-			printf("chassis power Commands: status, on, off, cycle, reset, diag, soft\n");
+	rc = ipmi_chassis_power_control(intf, ctl);
+	return rc;
+}
+
+int
+ipmi_chassis_main(struct ipmi_intf * intf, int argc, char ** argv)
+{
+	int rc = 0;
+
+	if ((argc == 0) || (strncmp(argv[0], "help", 4) == 0)) {
+		lprintf(LOG_NOTICE, "Chassis Commands:  status, power, identify, policy, restart_cause, poh, bootdev, selftest");
+	}
+	else if (strncmp(argv[0], "status", 6) == 0) {
+		rc = ipmi_chassis_status(intf);
+	}
+	else if (strncmp(argv[0], "selftest", 8) == 0) {
+		rc = ipmi_chassis_selftest(intf);
+	}
+	else if (strncmp(argv[0], "power", 5) == 0) {
+		uint8_t ctl = 0;
+
+		if ((argc < 2) || (strncmp(argv[1], "help", 4) == 0)) {
+			lprintf(LOG_NOTICE, "chassis power Commands: status, on, off, cycle, reset, diag, soft");
 			return 0;
 		}
-		if (!strncmp(argv[1], "status", 6)) {
-			ipmi_chassis_power_status(intf);
-			return 0;
+		if (strncmp(argv[1], "status", 6) == 0) {
+			rc = ipmi_chassis_print_power_status(intf);
+			return rc;
 		}
-
-		if (!strncmp(argv[1], "up", 2) || !strncmp(argv[1], "on", 2))
+		if ((strncmp(argv[1], "up", 2) == 0) || (strncmp(argv[1], "on", 2) == 0))
 			ctl = IPMI_CHASSIS_CTL_POWER_UP;
-		else if (!strncmp(argv[1], "down", 4) || !strncmp(argv[1], "off", 3))
+		else if ((strncmp(argv[1], "down", 4) == 0) || (strncmp(argv[1], "off", 3) == 0))
 			ctl = IPMI_CHASSIS_CTL_POWER_DOWN;
-		else if (!strncmp(argv[1], "cycle", 5))
+		else if (strncmp(argv[1], "cycle", 5) == 0)
 			ctl = IPMI_CHASSIS_CTL_POWER_CYCLE;
-		else if (!strncmp(argv[1], "reset", 5))
+		else if (strncmp(argv[1], "reset", 5) == 0)
 			ctl = IPMI_CHASSIS_CTL_HARD_RESET;
-		else if (!strncmp(argv[1], "diag", 5))
+		else if (strncmp(argv[1], "diag", 4) == 0)
 			ctl = IPMI_CHASSIS_CTL_PULSE_DIAG;
-		else if (!strncmp (argv[1], "acpi", 4) || !strncmp(argv[1], "soft", 4))
+		else if ((strncmp(argv[1], "acpi", 4) == 0) || (strncmp(argv[1], "soft", 4) == 0))
 			ctl = IPMI_CHASSIS_CTL_ACPI_SOFT;
 		else {
-			printf("Invalid chassis power command: %s\n", argv[1]);
+			lprintf(LOG_ERR, "Invalid chassis power command: %s", argv[1]);
 			return -1;
 		}
 
-		ipmi_chassis_power_control(intf, ctl);
+		rc = ipmi_chassis_power_control(intf, ctl);
 	}
-	else if (!strncmp(argv[0], "identify", 8)) {
+	else if (strncmp(argv[0], "identify", 8) == 0) {
 		if (argc < 2) {
-			ipmi_chassis_identify(intf, NULL);
+			rc = ipmi_chassis_identify(intf, NULL);
 		}
-		else if (!strncmp(argv[1], "help", 4)) {
-			printf("chassis identify <interval>\n");
-			printf("                 default is 15 seconds\n");
-			printf("                 0 to turn off\n");
+		else if (strncmp(argv[1], "help", 4) == 0) {
+			lprintf(LOG_NOTICE, "chassis identify <interval>");
+			lprintf(LOG_NOTICE, "                 default is 15 seconds");
+			lprintf(LOG_NOTICE, "                 0 to turn off");
+			lprintf(LOG_NOTICE, "                 force to turn on indefinitely");
 		} else {
-			ipmi_chassis_identify(intf, argv[1]);
+			rc = ipmi_chassis_identify(intf, argv[1]);
 		}
 	}
-	else if (!strncmp(argv[0], "poh", 3)) {
-		ipmi_chassis_poh(intf);
+	else if (strncmp(argv[0], "poh", 3) == 0) {
+		rc = ipmi_chassis_poh(intf);
 	}
-	else if (!strncmp(argv[0], "restart_cause", 13)) {
-		ipmi_chassis_restart_cause(intf);
+	else if (strncmp(argv[0], "restart_cause", 13) == 0) {
+		rc = ipmi_chassis_restart_cause(intf);
 	}
-	else if (!strncmp(argv[0], "policy", 4)) {
-		if (argc < 2 || !strncmp(argv[1], "help", 4)) {
-			printf("chassis policy <state>\n");
-			printf("   list        : return supported policies\n");
-			printf("   always-on   : turn on when power is restored\n");
-			printf("   previous    : return to previous state when power is restored\n");
-			printf("   always-off  : stay off after power is restored\n");
+	else if (strncmp(argv[0], "policy", 4) == 0) {
+		if ((argc < 2) || (strncmp(argv[1], "help", 4) == 0)) {
+			lprintf(LOG_NOTICE, "chassis policy <state>");
+			lprintf(LOG_NOTICE, "   list        : return supported policies");
+			lprintf(LOG_NOTICE, "   always-on   : turn on when power is restored");
+			lprintf(LOG_NOTICE, "   previous    : return to previous state when power is restored");
+			lprintf(LOG_NOTICE, "   always-off  : stay off after power is restored");
 		} else {
-			unsigned char ctl;
-
-			if (!strncmp(argv[1], "list", 4))
+			uint8_t ctl;
+			if (strncmp(argv[1], "list", 4) == 0)
 				ctl = IPMI_CHASSIS_POLICY_NO_CHANGE;
-			else if (!strncmp(argv[1], "always-on", 9))
+			else if (strncmp(argv[1], "always-on", 9) == 0)
 				ctl = IPMI_CHASSIS_POLICY_ALWAYS_ON;
-			else if (!strncmp(argv[1], "previous", 8))
+			else if (strncmp(argv[1], "previous", 8) == 0)
 				ctl = IPMI_CHASSIS_POLICY_PREVIOUS;
-			else if (!strncmp(argv[1], "always-off", 10))
+			else if (strncmp(argv[1], "always-off", 10) == 0)
 				ctl = IPMI_CHASSIS_POLICY_ALWAYS_OFF;
 			else {
-				printf("invalid chassis policy: %s\n", argv[1]);
+				lprintf(LOG_ERR, "Invalid chassis policy: %s", argv[1]);
 				return -1;
 			}
-
-			ipmi_chassis_power_policy(intf, ctl);
+			rc = ipmi_chassis_power_policy(intf, ctl);
 		}
 	}
-	else if (!strncmp(argv[0], "bootparam", 7)) {
-		if (argc < 3 || !strncmp(argv[1], "help", 4)) {
-			printf("bootparam get|set <option> [value ...]\n");
+	else if (strncmp(argv[0], "bootparam", 9) == 0) {
+		if ((argc < 3) || (strncmp(argv[1], "help", 4) == 0)) {
+			lprintf(LOG_NOTICE, "bootparam get <param #>");
+			lprintf(LOG_NOTICE, "bootparam set bootflag <flag>");
+			lprintf(LOG_NOTICE, "  force_pxe   : Force PXE boot");
+			lprintf(LOG_NOTICE, "  force_disk  : Force boot from default Hard-drive");
+			lprintf(LOG_NOTICE, "  force_safe  : Force boot from default Hard-drive, request Safe Mode");
+			lprintf(LOG_NOTICE, "  force_diag  : Force boot from Diagnostic Partition");
+			lprintf(LOG_NOTICE, "  force_cdrom : Force boot from CD/DVD");
+			lprintf(LOG_NOTICE, "  force_bios  : Force boot into BIOS Setup");
 		}
 		else {
-			if (!strncmp(argv[1], "get", 3)) {
-				ipmi_chassis_get_bootparam(intf, argv[2]);
+			if (strncmp(argv[1], "get", 3) == 0) {
+				rc = ipmi_chassis_get_bootparam(intf, argv[2]);
 			}
-			else if (!strncmp(argv[1], "set", 3)) {
+			else if (strncmp(argv[1], "set", 3) == 0) {
 				if (argc < 4) {
-					printf("bootparam set <option> [value ...]\n");
+					lprintf(LOG_NOTICE, "bootparam set <option> [value ...]");
 				} else {
-					if (!strncmp(argv[2], "bootflag", 8)) {
-						ipmi_chassis_set_bootflag(intf, argv[3]);
-					}
-					else {
-						printf("bootparam set <option> [value ...]\n");
-					}
+					if (strncmp(argv[2], "bootflag", 8) == 0)
+						rc = ipmi_chassis_set_bootdev(intf, argv[3], 0);
+					else
+						lprintf(LOG_NOTICE, "bootparam set <option> [value ...]");
 				}
 			}
-			else {
-				printf("bootparam get|set <option> [value]\n");
+			else
+				lprintf(LOG_NOTICE, "bootparam get|set <option> [value ...]");
+		}
+	}
+	else if (strncmp(argv[0], "bootdev", 7) == 0) {
+		if ((argc < 2) || (strncmp(argv[1], "help", 4) == 0)) {
+			lprintf(LOG_NOTICE, "bootdev <device> [clear-cmos=yes|no]");
+			lprintf(LOG_NOTICE, "  none  : Do not change boot device order");
+			lprintf(LOG_NOTICE, "  pxe   : Force PXE boot");
+			lprintf(LOG_NOTICE, "  disk  : Force boot from default Hard-drive");
+			lprintf(LOG_NOTICE, "  safe  : Force boot from default Hard-drive, request Safe Mode");
+			lprintf(LOG_NOTICE, "  diag  : Force boot from Diagnostic Partition");
+			lprintf(LOG_NOTICE, "  cdrom : Force boot from CD/DVD");
+			lprintf(LOG_NOTICE, "  bios  : Force boot into BIOS Setup");
+		} else {
+			if (argc < 3)
+				rc = ipmi_chassis_set_bootdev(intf, argv[1], 0);
+			else if (strncmp(argv[2], "clear-cmos=", 11) == 0) {
+				if (strncmp(argv[2]+11, "yes", 3) == 0)
+					rc = ipmi_chassis_set_bootdev(intf, argv[1], 1);
+				else 
+					rc = ipmi_chassis_set_bootdev(intf, argv[1], 0);
 			}
+			else
+				rc = ipmi_chassis_set_bootdev(intf, argv[1], 0);
 		}
 	}
 	else {
-		printf("Invalid Chassis command: %s\n", argv[0]);
+		lprintf(LOG_ERR, "Invalid Chassis command: %s", argv[0]);
 		return -1;
 	}
-	return 0;
+
+	return rc;
 }

ipmitool/lib/ipmi_event.c

@@ -0,0 +1,637 @@
+/*
+ * Copyright (c) 2003 Sun Microsystems, Inc.  All Rights Reserved.
+ * 
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 
+ * Redistribution of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 
+ * Redistribution in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * 
+ * Neither the name of Sun Microsystems, Inc. or the names of
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ * 
+ * This software is provided "AS IS," without a warranty of any kind.
+ * ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND WARRANTIES,
+ * INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A
+ * PARTICULAR PURPOSE OR NON-INFRINGEMENT, ARE HEREBY EXCLUDED.
+ * SUN MICROSYSTEMS, INC. ("SUN") AND ITS LICENSORS SHALL NOT BE LIABLE
+ * FOR ANY DAMAGES SUFFERED BY LICENSEE AS A RESULT OF USING, MODIFYING
+ * OR DISTRIBUTING THIS SOFTWARE OR ITS DERIVATIVES.  IN NO EVENT WILL
+ * SUN OR ITS LICENSORS BE LIABLE FOR ANY LOST REVENUE, PROFIT OR DATA,
+ * OR FOR DIRECT, INDIRECT, SPECIAL, CONSEQUENTIAL, INCIDENTAL OR
+ * PUNITIVE DAMAGES, HOWEVER CAUSED AND REGARDLESS OF THE THEORY OF
+ * LIABILITY, ARISING OUT OF THE USE OF OR INABILITY TO USE THIS SOFTWARE,
+ * EVEN IF SUN HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
+ */
+
+#include <stdlib.h>
+#include <stdio.h>
+#include <string.h>
+#include <sys/types.h>
+#include <sys/socket.h>
+#include <netinet/in.h>
+#include <arpa/inet.h>
+#include <errno.h>
+#include <unistd.h>
+#include <signal.h>
+#include <ctype.h>
+
+#include <ipmitool/ipmi.h>
+#include <ipmitool/ipmi_intf.h>
+#include <ipmitool/helper.h>
+#include <ipmitool/log.h>
+#include <ipmitool/ipmi_sel.h>
+#include <ipmitool/ipmi_strings.h>
+#include <ipmitool/ipmi_channel.h>
+#include <ipmitool/ipmi_event.h>
+#include <ipmitool/ipmi_sdr.h>
+
+
+static void
+ipmi_event_msg_print(struct ipmi_intf * intf, struct platform_event_msg * pmsg)
+{
+	struct sel_event_record sel_event;
+
+	memset(&sel_event, 0, sizeof(struct sel_event_record));
+
+	sel_event.record_id = 0;
+	sel_event.sel_type.standard_type.gen_id = 2;
+
+	sel_event.sel_type.standard_type.evm_rev        = pmsg->evm_rev;
+	sel_event.sel_type.standard_type.sensor_type    = pmsg->sensor_type;
+	sel_event.sel_type.standard_type.sensor_num     = pmsg->sensor_num;
+	sel_event.sel_type.standard_type.event_type     = pmsg->event_type;
+	sel_event.sel_type.standard_type.event_dir      = pmsg->event_dir;
+	sel_event.sel_type.standard_type.event_data[0]  = pmsg->event_data[0];
+	sel_event.sel_type.standard_type.event_data[1]  = pmsg->event_data[1];
+	sel_event.sel_type.standard_type.event_data[2]  = pmsg->event_data[2];
+	
+	if (verbose)
+		ipmi_sel_print_extended_entry_verbose(intf, &sel_event);
+	else
+		ipmi_sel_print_extended_entry(intf, &sel_event);
+}
+
+static int
+ipmi_send_platform_event(struct ipmi_intf * intf, struct platform_event_msg * emsg)
+{
+	struct ipmi_rs * rsp;
+	struct ipmi_rq req;
+	uint8_t rqdata[8];
+	uint8_t chmed;
+
+	memset(&req, 0, sizeof(req));
+	memset(rqdata, 0, 8);
+
+	req.msg.netfn = IPMI_NETFN_SE;
+	req.msg.cmd = 0x02;
+	req.msg.data = rqdata;
+
+	chmed = ipmi_current_channel_medium(intf);
+	if (chmed == IPMI_CHANNEL_MEDIUM_SYSTEM) {
+		/* system interface, need extra generator ID */
+		req.msg.data_len = 8;
+		rqdata[0] = 0x20;
+		memcpy(rqdata+1, emsg, sizeof(struct platform_event_msg));
+	}
+	else {
+		req.msg.data_len = 7;
+		memcpy(rqdata, emsg, sizeof(struct platform_event_msg));
+	}
+
+	ipmi_event_msg_print(intf, emsg);
+
+	rsp = intf->sendrecv(intf, &req);
+	if (rsp == NULL) {
+		lprintf(LOG_ERR, "Platform Event Message command failed");
+		return -1;
+	}
+	else if (rsp->ccode > 0) {
+		lprintf(LOG_ERR, "Platform Event Message command failed: %s",
+			val2str(rsp->ccode, completion_code_vals));
+		return -1;
+	}
+
+	return 0;
+}
+
+#define EVENT_THRESH_STATE_LNC_LO	0
+#define EVENT_THRESH_STATE_LNC_HI	1
+#define EVENT_THRESH_STATE_LCR_LO	2
+#define EVENT_THRESH_STATE_LCR_HI	3
+#define EVENT_THRESH_STATE_LNR_LO	4
+#define EVENT_THRESH_STATE_LNR_HI	5
+#define EVENT_THRESH_STATE_UNC_LO	6
+#define EVENT_THRESH_STATE_UNC_HI	7
+#define EVENT_THRESH_STATE_UCR_LO	8
+#define EVENT_THRESH_STATE_UCR_HI	9
+#define EVENT_THRESH_STATE_UNR_LO	10
+#define EVENT_THRESH_STATE_UNR_HI	11
+
+static const struct valstr ipmi_event_thresh_lo[] = {
+	{ EVENT_THRESH_STATE_LNC_LO, "lnc" },
+	{ EVENT_THRESH_STATE_LCR_LO, "lcr" },
+	{ EVENT_THRESH_STATE_LNR_LO, "lnr" },
+	{ EVENT_THRESH_STATE_UNC_LO, "unc" },
+	{ EVENT_THRESH_STATE_UCR_LO, "ucr" },
+	{ EVENT_THRESH_STATE_UNR_LO, "unr" },
+	{ 0, NULL  },
+};
+static const struct valstr ipmi_event_thresh_hi[] = {
+	{ EVENT_THRESH_STATE_LNC_HI, "lnc" },
+	{ EVENT_THRESH_STATE_LCR_HI, "lcr" },
+	{ EVENT_THRESH_STATE_LNR_HI, "lnr" },
+	{ EVENT_THRESH_STATE_UNC_HI, "unc" },
+	{ EVENT_THRESH_STATE_UCR_HI, "ucr" },
+	{ EVENT_THRESH_STATE_UNR_HI, "unr" },
+	{ 0, NULL  },
+};
+
+static int
+ipmi_send_platform_event_num(struct ipmi_intf * intf, int num)
+{
+	struct platform_event_msg emsg;
+
+	memset(&emsg, 0, sizeof(struct platform_event_msg));
+
+	/* IPMB/LAN/etc */
+	switch (num) {
+	case 1:			/* temperature */
+		printf("Sending SAMPLE event: Temperature - "
+		       "Upper Critical - Going High\n");
+		emsg.evm_rev       = 0x04;
+		emsg.sensor_type   = 0x01;
+		emsg.sensor_num    = 0x30;
+		emsg.event_dir     = EVENT_DIR_ASSERT;
+		emsg.event_type    = 0x01;
+		emsg.event_data[0] = EVENT_THRESH_STATE_UCR_HI;
+		emsg.event_data[1] = 0xff;
+		emsg.event_data[2] = 0xff;
+		break;
+	case 2:			/* voltage error */
+		printf("Sending SAMPLE event: Voltage Threshold - "
+		       "Lower Critical - Going Low\n");
+		emsg.evm_rev       = 0x04;
+		emsg.sensor_type   = 0x02;
+		emsg.sensor_num    = 0x60;
+		emsg.event_dir     = EVENT_DIR_ASSERT;
+		emsg.event_type    = 0x01;
+		emsg.event_data[0] = EVENT_THRESH_STATE_LCR_LO;
+		emsg.event_data[1] = 0xff;
+		emsg.event_data[2] = 0xff;
+		break;
+	case 3:			/* correctable ECC */
+		printf("Sending SAMPLE event: Memory - Correctable ECC\n");
+		emsg.evm_rev       = 0x04;
+		emsg.sensor_type   = 0x0c;
+		emsg.sensor_num    = 0x53;
+		emsg.event_dir     = EVENT_DIR_ASSERT;
+		emsg.event_type    = 0x6f;
+		emsg.event_data[0] = 0x00;
+		emsg.event_data[1] = 0xff;
+		emsg.event_data[2] = 0xff;
+		break;
+	default:
+		lprintf(LOG_ERR, "Invalid event number: %d", num);
+		return -1;
+	}
+
+	return ipmi_send_platform_event(intf, &emsg);
+}
+
+static int
+ipmi_event_find_offset(uint8_t code,
+		       struct ipmi_event_sensor_types * evt,
+		       char * desc)
+{
+	if (desc == NULL || code == 0)
+		return 0x00;
+
+	while (evt->type) {
+		if (evt->code == code && evt->desc != NULL &&
+		    strncasecmp(desc, evt->desc, __maxlen(desc, evt->desc)) == 0)
+			return evt->offset;
+		evt++;
+	}
+
+	lprintf(LOG_WARN, "Unable to find matching event offset for '%s'", desc);
+	return -1;
+}
+
+static void
+print_sensor_states(uint8_t sensor_type, uint8_t event_type)
+{
+	printf("Sensor States: \n  ");
+	ipmi_sdr_print_discrete_state_mini("\n  ", sensor_type,
+					   event_type, 0xff, 0xff);
+	printf("\n");
+}
+
+
+static int
+ipmi_event_fromsensor(struct ipmi_intf * intf, char * id, char * state, char * evdir)
+{
+	struct ipmi_rs * rsp;
+	struct sdr_record_list * sdr;
+	struct platform_event_msg emsg;
+	int off;
+
+	if (id == NULL) {
+		lprintf(LOG_ERR, "No sensor ID supplied");
+		return -1;
+	}
+
+	memset(&emsg, 0, sizeof(struct platform_event_msg));
+	emsg.evm_rev = 0x04;
+
+	if (evdir == NULL)
+		emsg.event_dir = EVENT_DIR_ASSERT;
+	else if (strncasecmp(evdir, "assert", 6) == 0)
+		emsg.event_dir = EVENT_DIR_ASSERT;
+	else if (strncasecmp(evdir, "deassert", 8) == 0)
+		emsg.event_dir = EVENT_DIR_DEASSERT;
+	else {
+		lprintf(LOG_ERR, "Invalid event direction %s.  Must be 'assert' or 'deassert'", evdir);
+		return -1;
+	}
+
+	printf("Finding sensor %s... ", id);
+	sdr = ipmi_sdr_find_sdr_byid(intf, id);
+	if (sdr == NULL) {
+		printf("not found!\n");
+		return -1;
+	}
+	printf("ok\n");
+
+	switch (sdr->type)
+	{
+	case SDR_RECORD_TYPE_FULL_SENSOR:
+
+		emsg.sensor_type   = sdr->record.full->sensor.type;
+		emsg.sensor_num    = sdr->record.full->keys.sensor_num;
+		emsg.event_type    = sdr->record.full->event_type;
+		break;
+
+	case SDR_RECORD_TYPE_COMPACT_SENSOR:
+
+		emsg.sensor_type = sdr->record.compact->sensor.type;
+		emsg.sensor_num  = sdr->record.compact->keys.sensor_num;
+		emsg.event_type  = sdr->record.compact->event_type;
+		break;
+
+	default:
+		lprintf(LOG_ERR, "Unknown sensor type for id '%s'", id);
+		return -1;
+	}
+
+	emsg.event_data[1] = 0xff;
+	emsg.event_data[2] = 0xff;
+
+	switch (emsg.event_type)
+	{
+	/*
+	 * Threshold Class
+	 */
+	case 1:
+	{
+		int dir = 0;
+		int hilo = 0;
+		off = 1;
+
+		if (state == NULL || strncasecmp(state, "list", 4) == 0) {
+			printf("Sensor States:\n");
+			printf("  lnr : Lower Non-Recoverable \n");
+			printf("  lcr : Lower Critical\n");
+			printf("  lnc : Lower Non-Critical\n");
+			printf("  unc : Upper Non-Critical\n");
+			printf("  ucr : Upper Critical\n");
+			printf("  unr : Upper Non-Recoverable\n");
+			return -1;
+		}
+
+		if (0 != strncasecmp(state, "lnr", 3) &&
+		    0 != strncasecmp(state, "lcr", 3) &&
+		    0 != strncasecmp(state, "lnc", 3) &&
+		    0 != strncasecmp(state, "unc", 3) &&
+		    0 != strncasecmp(state, "ucr", 3) &&
+		    0 != strncasecmp(state, "unr", 3))
+		{
+			lprintf(LOG_ERR, "Invalid threshold identifier %s", state);
+			return -1;
+		}
+
+		if (state[0] == 'u')
+			hilo = 1;
+		else
+			hilo = 0;
+
+		if (emsg.event_dir == EVENT_DIR_ASSERT)
+			dir = hilo;
+		else
+			dir = !hilo;
+
+		if ((emsg.event_dir == EVENT_DIR_ASSERT   && hilo == 1) ||
+		    (emsg.event_dir == EVENT_DIR_DEASSERT && hilo == 0))
+			emsg.event_data[0] = (uint8_t)(str2val(state, ipmi_event_thresh_hi) & 0xf);
+		else if ((emsg.event_dir == EVENT_DIR_ASSERT   && hilo == 0) ||
+			 (emsg.event_dir == EVENT_DIR_DEASSERT && hilo == 1))
+			emsg.event_data[0] = (uint8_t)(str2val(state, ipmi_event_thresh_lo) & 0xf);
+		else {
+			lprintf(LOG_ERR, "Invalid Event\n");
+			return -1;
+		}
+
+		rsp = ipmi_sdr_get_sensor_thresholds(intf, emsg.sensor_num);
+
+		if (rsp != NULL && rsp->ccode == 0) {
+
+			/* threshold reading */
+			emsg.event_data[2] = rsp->data[(emsg.event_data[0] / 2) + 1];
+
+			rsp = ipmi_sdr_get_sensor_hysteresis(intf, emsg.sensor_num);
+			if (rsp != NULL && rsp->ccode == 0)
+				off = dir ? rsp->data[0] : rsp->data[1];
+			if (off <= 0)
+				off = 1;
+
+			/* trigger reading */
+			if (dir) {
+				if ((emsg.event_data[2] + off) > 0xff)
+					emsg.event_data[1] = 0xff;
+				else
+					emsg.event_data[1] = emsg.event_data[2] + off;
+			}
+			else {
+				if ((emsg.event_data[2] - off) < 0)
+					emsg.event_data[1] = 0;
+				else
+					emsg.event_data[1] = emsg.event_data[2] - off;
+			}
+
+			/* trigger in byte 2, threshold in byte 3 */
+			emsg.event_data[0] |= 0x50;
+		}
+	}
+	break;
+
+	/*
+	 * Digital Discrete
+	 */
+	case 3: case 4: case 5: case 6: case 8: case 9:
+	{
+		int x;
+		const char * digi_on[] = { "present", "assert", "limit",
+					   "fail", "yes", "on", "up" };
+		const char * digi_off[] = { "absent", "deassert", "nolimit",
+					    "nofail", "no", "off", "down" };
+		/* 
+		 * print list of available states for this sensor
+		 */
+		if (state == NULL || strncasecmp(state, "list", 4) == 0) {
+			print_sensor_states(emsg.sensor_type, emsg.event_type);
+			printf("Sensor State Shortcuts:\n");
+			for (x = 0; x < sizeof(digi_on)/sizeof(*digi_on); x++) {
+				printf("  %-9s  %-9s\n", digi_on[x], digi_off[x]);
+			}
+			return 0;
+		}
+
+		off = 0;
+		for (x = 0; x < sizeof(digi_on)/sizeof(*digi_on); x++) {
+			if (strncasecmp(state, digi_on[x], strlen(digi_on[x])) == 0) {
+				emsg.event_data[0] = 1;
+				off = 1;
+				break;
+			}
+			else if (strncasecmp(state, digi_off[x], strlen(digi_off[x])) == 0) {
+				emsg.event_data[0] = 0;
+				off = 1;
+				break;
+			}
+		}
+		if (off == 0) {
+			off = ipmi_event_find_offset(
+				emsg.event_type, generic_event_types, state);
+			if (off < 0)
+				return -1;
+			emsg.event_data[0] = off;
+		}
+	}
+	break;
+
+	/*
+	 * Generic Discrete
+	 */
+	case 2: case 7: case 10: case 11: case 12:
+	{
+		/* 
+		 * print list of available states for this sensor
+		 */
+		if (state == NULL || strncasecmp(state, "list", 4) == 0) {
+			print_sensor_states(emsg.sensor_type, emsg.event_type);
+			return 0;
+		}
+		off = ipmi_event_find_offset(
+			emsg.event_type, generic_event_types, state);
+		if (off < 0)
+			return -1;
+		emsg.event_data[0] = off;
+	}
+	break;
+		
+	/*
+	 * Sensor-Specific Discrete
+	 */
+	case 0x6f:
+	{
+		/* 
+		 * print list of available states for this sensor
+		 */
+		if (state == NULL || strncasecmp(state, "list", 4) == 0) {
+			print_sensor_states(emsg.sensor_type, emsg.event_type);
+			return 0;
+		}
+		off = ipmi_event_find_offset(
+			emsg.sensor_type, sensor_specific_types, state);
+		if (off < 0)
+			return -1;
+		emsg.event_data[0] = off;
+	}
+	break;
+
+	default:
+		return -1;
+
+	}
+
+	return ipmi_send_platform_event(intf, &emsg);
+}
+
+static int
+ipmi_event_fromfile(struct ipmi_intf * intf, char * file)
+{
+	FILE * fp;
+	struct ipmi_rs * rsp;
+	struct ipmi_rq req;
+	struct sel_event_record sel_event;
+	uint8_t rqdata[8];
+	char buf[1024];
+	char * ptr, * tok;
+	int i, j;
+	uint8_t chmed;
+	int rc = 0;
+
+	if (file == NULL)
+		return -1;
+
+	memset(rqdata, 0, 8);
+
+	/* setup Platform Event Message command */
+	memset(&req, 0, sizeof(req));
+	req.msg.netfn = IPMI_NETFN_SE;
+	req.msg.cmd = 0x02;
+	req.msg.data = rqdata;
+	req.msg.data_len = 7;
+
+	chmed = ipmi_current_channel_medium(intf);
+	if (chmed == IPMI_CHANNEL_MEDIUM_SYSTEM) {
+		/* system interface, need extra generator ID */
+		rqdata[0] = 0x20;
+		req.msg.data_len = 8;
+	}
+
+	fp = ipmi_open_file_read(file);
+	if (fp == NULL)
+		return -1;
+
+	while (feof(fp) == 0) {
+		if (fgets(buf, 1024, fp) == NULL)
+			continue;
+
+		/* clip off optional comment tail indicated by # */
+		ptr = strchr(buf, '#');
+		if (ptr)
+			*ptr = '\0';
+		else
+			ptr = buf + strlen(buf);
+
+		/* clip off trailing and leading whitespace */
+		ptr--;
+		while (isspace(*ptr) && ptr >= buf)
+			*ptr-- = '\0';
+		ptr = buf;
+		while (isspace(*ptr))
+			ptr++;
+		if (strlen(ptr) == 0)
+			continue;
+
+		/* parse the event, 7 bytes with optional comment */
+		/* 0x00 0x00 0x00 0x00 0x00 0x00 0x00 # event */
+		i = 0;
+		tok = strtok(ptr, " ");
+		while (tok) {
+			if (i == 7)
+				break;
+			j = i++;
+			if (chmed == IPMI_CHANNEL_MEDIUM_SYSTEM)
+				j++;
+			rqdata[j] = (uint8_t)strtol(tok, NULL, 0);
+			tok = strtok(NULL, " ");
+		}
+		if (i < 7) {
+			lprintf(LOG_ERR, "Invalid Event: %s",
+			       buf2str(rqdata, sizeof(rqdata)));
+			continue;
+		}
+
+		memset(&sel_event, 0, sizeof(struct sel_event_record));
+		sel_event.record_id = 0;
+		sel_event.sel_type.standard_type.gen_id = 2;
+
+		j = (chmed == IPMI_CHANNEL_MEDIUM_SYSTEM) ? 1 : 0;
+		sel_event.sel_type.standard_type.evm_rev = rqdata[j++];
+		sel_event.sel_type.standard_type.sensor_type = rqdata[j++];
+		sel_event.sel_type.standard_type.sensor_num = rqdata[j++];
+		sel_event.sel_type.standard_type.event_type = rqdata[j] & 0x7f;
+		sel_event.sel_type.standard_type.event_dir = (rqdata[j++] & 0x80) >> 7;
+		sel_event.sel_type.standard_type.event_data[0] = rqdata[j++];
+		sel_event.sel_type.standard_type.event_data[1] = rqdata[j++];
+		sel_event.sel_type.standard_type.event_data[2] = rqdata[j++];
+
+		ipmi_sel_print_std_entry(intf, &sel_event);
+		
+		rsp = intf->sendrecv(intf, &req);
+		if (rsp == NULL) {
+			lprintf(LOG_ERR, "Platform Event Message command failed");
+			rc = -1;
+		}
+		else if (rsp->ccode > 0) {
+			lprintf(LOG_ERR, "Platform Event Message command failed: %s",
+				val2str(rsp->ccode, completion_code_vals));
+			rc = -1;
+		}
+	}
+
+	fclose(fp);
+	return rc;
+}
+
+static void
+ipmi_event_usage(void)
+{
+	lprintf(LOG_NOTICE, "");
+	lprintf(LOG_NOTICE, "usage: event <num>");
+	lprintf(LOG_NOTICE, "   Send generic test events");
+	lprintf(LOG_NOTICE, "   1 : Temperature - Upper Critical - Going High");
+	lprintf(LOG_NOTICE, "   2 : Voltage Threshold - Lower Critical - Going Low");
+	lprintf(LOG_NOTICE, "   3 : Memory - Correctable ECC");
+	lprintf(LOG_NOTICE, "");
+	lprintf(LOG_NOTICE, "usage: event file <filename>");
+	lprintf(LOG_NOTICE, "   Read and generate events from file");
+	lprintf(LOG_NOTICE, "   Use the 'sel save' command to generate from SEL");
+	lprintf(LOG_NOTICE, "");
+	lprintf(LOG_NOTICE, "usage: event <sensorid> <state> [event_dir]");
+	lprintf(LOG_NOTICE, "   sensorid  : Sensor ID to use for event data");
+	lprintf(LOG_NOTICE, "   state     : Sensor state, use 'list' to see possible states for sensor");
+	lprintf(LOG_NOTICE, "   event_dir : assert, deassert [default=assert]");
+	lprintf(LOG_NOTICE, "");
+}
+
+int
+ipmi_event_main(struct ipmi_intf * intf, int argc, char ** argv)
+{
+	int rc = 0;
+
+	if (argc == 0 || strncmp(argv[0], "help", 4) == 0) {
+		ipmi_event_usage();
+		return 0;
+	}
+	if (strncmp(argv[0], "file", 4) == 0) {
+		if (argc < 2) {
+			ipmi_event_usage();
+			return 0;
+		}
+		return ipmi_event_fromfile(intf, argv[1]);
+	}
+	if (strlen(argv[0]) == 1) {
+		switch (argv[0][0]) {
+		case '1': return ipmi_send_platform_event_num(intf, 1);
+		case '2': return ipmi_send_platform_event_num(intf, 2);
+		case '3': return ipmi_send_platform_event_num(intf, 3);
+		}
+	}
+	if (argc < 2)
+		rc = ipmi_event_fromsensor(intf, argv[0], NULL, NULL);
+	else if (argc < 3)
+		rc = ipmi_event_fromsensor(intf, argv[0], argv[1], NULL);
+	else
+		rc = ipmi_event_fromsensor(intf, argv[0], argv[1], argv[2]);
+
+	return rc;
+}

ipmitool/lib/ipmi_isol.c

@@ -0,0 +1,191 @@
+/*
+ * Copyright (c) 2003 Sun Microsystems, Inc.  All Rights Reserved.
+ * 
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 
+ * Redistribution of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 
+ * Redistribution in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * 
+ * Neither the name of Sun Microsystems, Inc. or the names of
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ * 
+ * This software is provided "AS IS," without a warranty of any kind.
+ * ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND WARRANTIES,
+ * INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A
+ * PARTICULAR PURPOSE OR NON-INFRINGEMENT, ARE HEREBY EXCLUDED.
+ * SUN MICROSYSTEMS, INC. ("SUN") AND ITS LICENSORS SHALL NOT BE LIABLE
+ * FOR ANY DAMAGES SUFFERED BY LICENSEE AS A RESULT OF USING, MODIFYING
+ * OR DISTRIBUTING THIS SOFTWARE OR ITS DERIVATIVES.  IN NO EVENT WILL
+ * SUN OR ITS LICENSORS BE LIABLE FOR ANY LOST REVENUE, PROFIT OR DATA,
+ * OR FOR DIRECT, INDIRECT, SPECIAL, CONSEQUENTIAL, INCIDENTAL OR
+ * PUNITIVE DAMAGES, HOWEVER CAUSED AND REGARDLESS OF THE THEORY OF
+ * LIABILITY, ARISING OUT OF THE USE OF OR INABILITY TO USE THIS SOFTWARE,
+ * EVEN IF SUN HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
+ */
+
+#include <stdlib.h>
+#include <string.h>
+#include <stdio.h>
+
+#include <ipmitool/helper.h>
+#include <ipmitool/log.h>
+#include <ipmitool/ipmi.h>
+#include <ipmitool/ipmi_strings.h>
+#include <ipmitool/ipmi_intf.h>
+#include <ipmitool/ipmi_isol.h>
+
+const struct valstr ipmi_isol_baud_vals[] = {
+	{ ISOL_BAUD_RATE_9600,   "9600" },
+	{ ISOL_BAUD_RATE_19200,  "19200" },
+	{ ISOL_BAUD_RATE_38400,  "38400" },
+	{ ISOL_BAUD_RATE_57600,  "57600" },
+	{ ISOL_BAUD_RATE_115200, "115200" },
+	{ 0x00, NULL }
+};
+
+extern int verbose;
+
+static int ipmi_isol_setup(struct ipmi_intf * intf, char baudsetting)
+{
+	struct ipmi_rs * rsp;
+	struct ipmi_rq req;
+	unsigned char data[6];	
+
+	/* TEST FOR AVAILABILITY */
+
+	memset(data, 0, 6);
+	data[0] = 0x00;
+	data[1] = ISOL_ENABLE_PARAM;
+	data[2] = ISOL_ENABLE_FLAG;
+
+	memset(&req, 0, sizeof(req));
+	req.msg.netfn = IPMI_NETFN_ISOL;
+	req.msg.cmd = SET_ISOL_CONFIG;
+	req.msg.data = data;
+	req.msg.data_len = 3;
+
+	rsp = intf->sendrecv(intf, &req);
+	if (rsp == NULL) {
+		lprintf(LOG_ERR, "Error in Set ISOL Config Command");
+		return -1;
+	}
+	if (rsp->ccode == 0xc1) {
+		lprintf(LOG_ERR, "IPMI v1.5 Serial Over Lan (ISOL) not supported!");
+		return -1;
+	}
+	if (rsp->ccode > 0) {
+		lprintf(LOG_ERR, "Error in Set ISOL Config Command: %s",
+			val2str(rsp->ccode, completion_code_vals));
+		return -1;
+	}
+
+	/* GET ISOL CONFIG */
+
+	memset(data, 0, 6);
+	data[0] = 0x00;
+	data[1] = ISOL_AUTHENTICATION_PARAM;
+	data[2] = 0x00;		/* block */
+	data[3] = 0x00;		/* selector */
+	req.msg.cmd = GET_ISOL_CONFIG;
+	req.msg.data_len = 4;
+
+	rsp = intf->sendrecv(intf, &req);
+	if (rsp == NULL) {
+		lprintf(LOG_ERR, "Error in Get ISOL Config Command");
+		return -1;
+	}
+	if (rsp->ccode > 0) {
+		lprintf(LOG_ERR, "Error in Get ISOL Config Command: %s",
+			val2str(rsp->ccode, completion_code_vals));
+		return -1;
+	}
+
+	if (verbose > 1)
+		printbuf(rsp->data, rsp->data_len, "ISOL Config");
+
+	/* SET ISOL CONFIG - AUTHENTICATION */
+
+	memset(data, 0, 6);
+	data[0] = 0x00;
+	data[1] = ISOL_AUTHENTICATION_PARAM;
+	data[2] = ISOL_PRIVILEGE_LEVEL_USER | (rsp->data[1] & 0x80);
+	req.msg.cmd = SET_ISOL_CONFIG;
+	req.msg.data_len = 3;
+
+	rsp = intf->sendrecv(intf, &req);
+	if (rsp == NULL) {
+		lprintf(LOG_ERR, "Error in Set ISOL Config (Authentication) Command");
+		return -1;
+	}
+	if (rsp->ccode > 0) {
+		lprintf(LOG_ERR, "Error in Set ISOL Config (Authentication) Command: %s",
+			val2str(rsp->ccode, completion_code_vals));
+		return -1;
+	}
+
+	/* SET ISOL CONFIG - BAUD RATE */
+
+	memset(data, 0, 6);
+	data[0] = 0x00;
+	data[1] = ISOL_BAUD_RATE_PARAM;
+	data[2] = baudsetting;
+	req.msg.cmd = SET_ISOL_CONFIG;
+	req.msg.data_len = 3;
+
+	rsp = intf->sendrecv(intf, &req);
+	if (rsp == NULL) {
+		lprintf(LOG_ERR, "Error in Set ISOL Config (Baud Rate) Command");
+		return -1;
+	}
+	if (rsp->ccode > 0) {
+		lprintf(LOG_ERR, "Error in Set ISOL Config (Baud Rate) Command: %s",
+			val2str(rsp->ccode, completion_code_vals));
+		return -1;
+	}
+
+	printf("Set ISOL Baud Rate to %s\n",
+	       val2str(baudsetting, ipmi_isol_baud_vals));
+
+	return 0;
+}
+
+int ipmi_isol_main(struct ipmi_intf * intf, int argc, char ** argv)
+{
+	int ret = 0;
+
+	if (argc < 2 || strncmp(argv[0], "help", 4) == 0) {
+		lprintf(LOG_NOTICE, "ISOL Commands: setup <baud>");
+		lprintf(LOG_NOTICE, "ISOL Baud Rates:  9600, 19200, 38400, 57600, 115200");
+		return 0;
+	}
+		
+	if (strncmp(argv[0], "setup", 5) == 0) {
+		if (strncmp(argv[1], "9600", 4) == 0) {
+			ret = ipmi_isol_setup(intf, ISOL_BAUD_RATE_9600);
+		}
+		else if (strncmp(argv[1], "19200", 5) == 0) {
+			ret = ipmi_isol_setup(intf, ISOL_BAUD_RATE_19200);
+		}
+		else if (strncmp(argv[1], "38400", 5) == 0) {
+			ret = ipmi_isol_setup(intf, ISOL_BAUD_RATE_38400);
+		}
+		else if (strncmp(argv[1], "57600", 5) == 0) {
+			ret = ipmi_isol_setup(intf, ISOL_BAUD_RATE_57600);
+		}
+		else if (strncmp(argv[1], "115200", 6) == 0) {
+			ret = ipmi_isol_setup(intf, ISOL_BAUD_RATE_115200);
+		}
+		else {
+			lprintf(LOG_ERR, "ISOL - Unsupported baud rate: %s", argv[1]);
+			ret = -1;
+		}
+	}
+	return ret;
+}

ipmitool/lib/ipmi_main.c

@@ -0,0 +1,629 @@
+/*
+ * Copyright (c) 2003 Sun Microsystems, Inc.  All Rights Reserved.
+ * 
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 
+ * Redistribution of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 
+ * Redistribution in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * 
+ * Neither the name of Sun Microsystems, Inc. or the names of
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ * 
+ * This software is provided "AS IS," without a warranty of any kind.
+ * ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND WARRANTIES,
+ * INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A
+ * PARTICULAR PURPOSE OR NON-INFRINGEMENT, ARE HEREBY EXCLUDED.
+ * SUN MICROSYSTEMS, INC. ("SUN") AND ITS LICENSORS SHALL NOT BE LIABLE
+ * FOR ANY DAMAGES SUFFERED BY LICENSEE AS A RESULT OF USING, MODIFYING
+ * OR DISTRIBUTING THIS SOFTWARE OR ITS DERIVATIVES.  IN NO EVENT WILL
+ * SUN OR ITS LICENSORS BE LIABLE FOR ANY LOST REVENUE, PROFIT OR DATA,
+ * OR FOR DIRECT, INDIRECT, SPECIAL, CONSEQUENTIAL, INCIDENTAL OR
+ * PUNITIVE DAMAGES, HOWEVER CAUSED AND REGARDLESS OF THE THEORY OF
+ * LIABILITY, ARISING OUT OF THE USE OF OR INABILITY TO USE THIS SOFTWARE,
+ * EVEN IF SUN HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
+ */
+
+#include <stdlib.h>
+#include <stdio.h>
+#include <inttypes.h>
+#include <signal.h>
+#include <string.h>
+#include <strings.h>
+#include <sys/types.h>
+#include <sys/stat.h>
+#include <unistd.h>
+#include <fcntl.h>
+#include <errno.h>
+#include <ctype.h>
+
+#include <ipmitool/helper.h>
+#include <ipmitool/log.h>
+#include <ipmitool/ipmi.h>
+#include <ipmitool/ipmi_intf.h>
+#include <ipmitool/ipmi_session.h>
+#include <ipmitool/ipmi_sdr.h>
+#include <ipmitool/ipmi_sel.h>
+#include <ipmitool/ipmi_fru.h>
+#include <ipmitool/ipmi_sol.h>
+#include <ipmitool/ipmi_isol.h>
+#include <ipmitool/ipmi_lanp.h>
+#include <ipmitool/ipmi_chassis.h>
+#include <ipmitool/ipmi_mc.h>
+#include <ipmitool/ipmi_firewall.h>
+#include <ipmitool/ipmi_sensor.h>
+#include <ipmitool/ipmi_channel.h>
+#include <ipmitool/ipmi_session.h>
+#include <ipmitool/ipmi_event.h>
+#include <ipmitool/ipmi_user.h>
+#include <ipmitool/ipmi_raw.h>
+#include <ipmitool/ipmi_pef.h>
+#include <ipmitool/ipmi_oem.h>
+
+#ifdef HAVE_CONFIG_H
+# include <config.h>
+#endif
+
+#ifdef ENABLE_ALL_OPTIONS
+# define OPTION_STRING	"I:hVvcgsEao:H:P:f:U:p:C:L:A:t:m:S:l:b:e:k:O:"
+#else
+# define OPTION_STRING	"I:hVvcH:f:U:p:S:"
+#endif
+
+extern int verbose;
+extern int csv_output;
+extern const struct valstr ipmi_privlvl_vals[];
+extern const struct valstr ipmi_authtype_session_vals[];
+
+/* defined in ipmishell.c */
+#ifdef HAVE_READLINE
+extern int ipmi_shell_main(struct ipmi_intf * intf, int argc, char ** argv);
+#endif
+extern int ipmi_set_main(struct ipmi_intf * intf, int argc, char ** argv);
+extern int ipmi_exec_main(struct ipmi_intf * intf, int argc, char ** argv);
+
+
+/* ipmi_password_file_read  -  Open file and read password from it
+ *
+ * @filename:	file name to read from
+ *
+ * returns pointer to allocated buffer containing password
+ *   (caller is expected to free when finished)
+ * returns NULL on error
+ */
+static char *
+ipmi_password_file_read(char * filename)
+{
+	FILE * fp;
+	char * pass = NULL;
+	int l;
+
+	pass = malloc(16);
+	if (pass == NULL) {
+		lprintf(LOG_ERR, "ipmitool: malloc failure");
+		return NULL;
+	}
+
+	fp = ipmi_open_file_read((const char *)filename);
+	if (fp == NULL) {
+		lprintf(LOG_ERR, "Unable to open password file %s",
+			filename);
+		return NULL;
+	}
+
+	/* read in id */
+	if (fgets(pass, 16, fp) == NULL) {
+		lprintf(LOG_ERR, "Unable to read password from file %s",
+			filename);
+		fclose(fp);
+		return NULL;
+	}
+
+ 	/* remove trailing whitespace */
+	l = strcspn(pass, " \r\n\t");
+	if (l > 0) {
+		pass[l] = '\0';
+	}
+
+	fclose(fp);
+	return pass;
+}
+
+
+/*
+ * Print all the commands in the above table to stderr
+ * used for help text on command line and shell
+ */
+void
+ipmi_cmd_print(struct ipmi_cmd * cmdlist)
+{
+	struct ipmi_cmd * cmd;
+	int hdr = 0;
+
+	if (cmdlist == NULL)
+		return;
+	for (cmd=cmdlist; cmd->func != NULL; cmd++) {
+		if (cmd->desc == NULL)
+			continue;
+		if (hdr == 0) {
+			lprintf(LOG_NOTICE, "Commands:");
+			hdr = 1;
+		}
+		lprintf(LOG_NOTICE, "\t%-12s  %s", cmd->name, cmd->desc);
+	}
+	lprintf(LOG_NOTICE, "");
+}
+
+/* ipmi_cmd_run - run a command from list based on parameters
+ *                called from main()
+ *
+ *                1. iterate through ipmi_cmd_list matching on name
+ *                2. call func() for that command
+ *
+ * @intf:	ipmi interface
+ * @name:	command name
+ * @argc:	command argument count
+ * @argv:	command argument list
+ *
+ * returns value from func() of that commnad if found
+ * returns -1 if command is not found
+ */
+int
+ipmi_cmd_run(struct ipmi_intf * intf, char * name, int argc, char ** argv)
+{
+	struct ipmi_cmd * cmd = intf->cmdlist;
+
+	/* hook to run a default command if nothing specified */
+	if (name == NULL) {
+		if (cmd->func == NULL || cmd->name == NULL)
+			return -1;
+		else if (strncmp(cmd->name, "default", 7) == 0)
+			return cmd->func(intf, 0, NULL);
+		else {
+			lprintf(LOG_ERR, "No command provided!");
+			ipmi_cmd_print(intf->cmdlist);
+			return -1;
+		}
+	}
+
+	for (cmd=intf->cmdlist; cmd->func != NULL; cmd++) {
+		if (strncmp(name, cmd->name, __maxlen(cmd->name, name)) == 0)
+			break;
+	}
+	if (cmd->func == NULL) {
+		cmd = intf->cmdlist;
+		if (strncmp(cmd->name, "default", 7) == 0)
+			return cmd->func(intf, argc+1, argv-1);
+		lprintf(LOG_ERR, "Invalid command: %s", name);
+		ipmi_cmd_print(intf->cmdlist);
+		return -1;
+	}
+	return cmd->func(intf, argc, argv);
+}
+
+static void
+ipmi_option_usage(const char * progname, struct ipmi_cmd * cmdlist, struct ipmi_intf_support * intflist)
+{
+	lprintf(LOG_NOTICE, "%s version %s\n", progname, VERSION);
+	lprintf(LOG_NOTICE, "usage: %s [options...] <command>\n", progname);
+	lprintf(LOG_NOTICE, "       -h             This help");
+	lprintf(LOG_NOTICE, "       -V             Show version information");
+	lprintf(LOG_NOTICE, "       -v             Verbose (can use multiple times)");
+	lprintf(LOG_NOTICE, "       -c             Display output in comma separated format");
+	lprintf(LOG_NOTICE, "       -I intf        Interface to use");
+	lprintf(LOG_NOTICE, "       -H hostname    Remote host name for LAN interface");
+	lprintf(LOG_NOTICE, "       -p port        Remote RMCP port [default=623]");
+	lprintf(LOG_NOTICE, "       -U username    Remote session username");
+	lprintf(LOG_NOTICE, "       -f file        Read remote session password from file");
+	lprintf(LOG_NOTICE, "       -S sdr         Use local file for remote SDR cache");
+#ifdef ENABLE_ALL_OPTIONS
+	lprintf(LOG_NOTICE, "       -a             Prompt for remote password");
+	lprintf(LOG_NOTICE, "       -e char        Set SOL escape character");
+	lprintf(LOG_NOTICE, "       -C ciphersuite Cipher suite to be used by lanplus interface");
+	lprintf(LOG_NOTICE, "       -k key         Use Kg key for IPMIv2 authentication");
+	lprintf(LOG_NOTICE, "       -L level       Remote session privilege level [default=ADMINISTRATOR]");
+	lprintf(LOG_NOTICE, "       -A authtype    Force use of auth type NONE, PASSWORD, MD2, MD5 or OEM");
+	lprintf(LOG_NOTICE, "       -P password    Remote session password");
+	lprintf(LOG_NOTICE, "       -E             Read password from IPMI_PASSWORD environment variable");
+	lprintf(LOG_NOTICE, "       -m address     Set local IPMB address");
+	lprintf(LOG_NOTICE, "       -b channel     Set destination channel for bridged request");
+	lprintf(LOG_NOTICE, "       -l lun         Set destination lun for raw commands");
+	lprintf(LOG_NOTICE, "       -t address     Bridge request to remote target address");
+	lprintf(LOG_NOTICE, "       -o oemtype     Setup for OEM (use 'list' to see available OEM types)");
+	lprintf(LOG_NOTICE, "       -O seloem      Use file for OEM SEL event descriptions");
+#endif
+	lprintf(LOG_NOTICE, "");
+
+	ipmi_intf_print(intflist);
+
+	if (cmdlist != NULL)
+		ipmi_cmd_print(cmdlist);
+}
+
+
+/* ipmi_parse_options  -  helper function to handle parsing command line options
+ *
+ * @argc:	count of options
+ * @argv:	list of options
+ * @cmdlist:	list of supported commands
+ * @intflist:	list of supported interfaces
+ *
+ * returns 0 on success
+ * returns -1 on error
+ */
+int
+ipmi_main(int argc, char ** argv,
+	  struct ipmi_cmd * cmdlist,
+	  struct ipmi_intf_support * intflist)
+{
+	struct ipmi_intf * intf = NULL;
+	struct ipmi_intf_support * sup;
+	int privlvl = 0;
+	uint8_t target_addr = 0;
+	uint8_t target_channel = 0;
+	uint8_t target_lun     = 0;
+	uint8_t my_addr = 0;
+	int authtype = -1;
+	char * tmp = NULL;
+	char * hostname = NULL;
+	char * username = NULL;
+	char * password = NULL;
+	char * intfname = NULL;
+	char * progname = NULL;
+	char * oemtype  = NULL;
+	char * sdrcache = NULL;
+	char * kgkey    = NULL;
+	char * seloem   = NULL;
+	int port = 0;
+	int cipher_suite_id = 3; /* See table 22-19 of the IPMIv2 spec */
+	int argflag, i, found;
+	int rc = -1;
+	char sol_escape_char = SOL_ESCAPE_CHARACTER_DEFAULT;
+
+	/* save program name */
+	progname = strrchr(argv[0], '/');
+	progname = ((progname == NULL) ? argv[0] : progname+1);
+
+	while ((argflag = getopt(argc, (char **)argv, OPTION_STRING)) != -1)
+	{
+		switch (argflag) {
+		case 'I':
+			intfname = strdup(optarg);
+			if (intfname == NULL) {
+				lprintf(LOG_ERR, "%s: malloc failure", progname);
+				goto out_free;
+			}
+			if (intflist != NULL) {
+				found = 0;
+				for (sup=intflist; sup->name != NULL; sup++) {
+					if (strncmp(sup->name, intfname, strlen(intfname)) == 0 &&
+					    strncmp(sup->name, intfname, strlen(sup->name)) == 0 &&
+					    sup->supported == 1)
+						found = 1;
+				}
+				if (!found) {
+					lprintf(LOG_ERR, "Interface %s not supported", intfname);
+					goto out_free;
+				}
+			}
+			break;
+		case 'h':
+			ipmi_option_usage(progname, cmdlist, intflist);
+			rc = 0;
+			goto out_free;
+			break;
+		case 'V':
+			printf("%s version %s\n", progname, VERSION);
+			rc = 0;
+			goto out_free;
+			break;
+		case 'p':
+			port = atoi(optarg);
+			break;
+		case 'C':
+			cipher_suite_id = atoi(optarg);
+			break;
+		case 'v':
+			verbose++;
+			break;
+		case 'c':
+			csv_output = 1;
+			break;
+		case 'H':
+			hostname = strdup(optarg);
+			if (hostname == NULL) {
+				lprintf(LOG_ERR, "%s: malloc failure", progname);
+				goto out_free;
+			}
+			break;
+		case 'f':
+			if (password)
+				free(password);
+			password = ipmi_password_file_read(optarg);
+			if (password == NULL)
+				lprintf(LOG_ERR, "Unable to read password "
+					"from file %s", optarg);
+			break;
+		case 'a':
+#ifdef HAVE_GETPASSPHRASE
+			tmp = getpassphrase("Password: ");
+#else
+			tmp = getpass("Password: ");
+#endif
+			if (tmp != NULL) {
+				if (password)
+					free(password);
+				password = strdup(tmp);
+				if (password == NULL) {
+					lprintf(LOG_ERR, "%s: malloc failure", progname);
+					goto out_free;
+				}
+			}
+			break;
+		case 'k':
+			kgkey = strdup(optarg);
+			if (kgkey == NULL) {
+				lprintf(LOG_ERR, "%s: malloc failure", progname);
+				goto out_free;
+			}
+			break;
+		case 'U':
+			username = strdup(optarg);
+			if (username == NULL) {
+				lprintf(LOG_ERR, "%s: malloc failure", progname);
+				goto out_free;
+			}
+			break;
+		case 'S':
+			sdrcache = strdup(optarg);
+			if (sdrcache == NULL) {
+				lprintf(LOG_ERR, "%s: malloc failure", progname);
+				goto out_free;
+			}
+			break;
+#ifdef ENABLE_ALL_OPTIONS
+		case 'o':
+			oemtype = strdup(optarg);
+			if (oemtype == NULL) {
+				lprintf(LOG_ERR, "%s: malloc failure", progname);
+				goto out_free;
+			}
+			if (strncmp(oemtype, "list", 4) == 0 ||
+			    strncmp(oemtype, "help", 4) == 0) {
+				ipmi_oem_print();
+				goto out_free;
+			}
+			break;
+		case 'g':
+			/* backwards compatible oem hack */
+			oemtype = strdup("intelwv2");
+			break;
+		case 's':
+			/* backwards compatible oem hack */
+			oemtype = strdup("supermicro");
+			break;
+		case 'P':
+			if (password)
+				free(password);
+			password = strdup(optarg);
+			if (password == NULL) {
+				lprintf(LOG_ERR, "%s: malloc failure", progname);
+				goto out_free;
+			}
+
+			/* Prevent password snooping with ps */
+			i = strlen(optarg);
+			memset(optarg, 'X', i);
+			break;
+		case 'E':
+			if ((tmp = getenv("IPMITOOL_PASSWORD")))
+			{
+				if (password)
+					free(password);
+				password = strdup(tmp);
+				if (password == NULL) {
+					lprintf(LOG_ERR, "%s: malloc failure", progname);
+					goto out_free;
+				}
+			}
+			else if ((tmp = getenv("IPMI_PASSWORD")))
+			{
+				if (password)
+					free(password);
+				password = strdup(tmp);
+				if (password == NULL) {
+					lprintf(LOG_ERR, "%s: malloc failure", progname);
+					goto out_free;
+				}
+			}
+			else {
+				lprintf(LOG_WARN, "Unable to read password from environment");
+			}
+			break;
+		case 'L':
+			privlvl = str2val(optarg, ipmi_privlvl_vals);
+			if (privlvl == 0xFF)
+				lprintf(LOG_WARN, "Invalid privilege level %s", optarg);
+			break;
+		case 'A':
+			authtype = str2val(optarg, ipmi_authtype_session_vals);
+			break;
+		case 't':
+			target_addr = (uint8_t)strtol(optarg, NULL, 0);
+			break;
+		case 'b':
+			target_channel = (uint8_t)strtol(optarg, NULL, 0);
+			break;
+		case 'l':
+			target_lun = (uint8_t)strtol(optarg, NULL, 0);
+			break;
+		case 'm':
+			my_addr = (uint8_t)strtol(optarg, NULL, 0);
+			break;
+		case 'e':
+			sol_escape_char = optarg[0];
+			break;
+		case 'O':
+			seloem = strdup(optarg);
+			if (seloem == NULL) {
+				lprintf(LOG_ERR, "%s: malloc failure", progname);
+				goto out_free;
+			}
+			break;
+#endif
+		default:
+			ipmi_option_usage(progname, cmdlist, intflist);
+			goto out_free;
+		}
+	}
+
+	/* check for command before doing anything */
+	if (argc-optind > 0 &&
+	    strncmp(argv[optind], "help", 4) == 0) {
+		ipmi_cmd_print(cmdlist);
+		rc = 0;
+		goto out_free;
+	}
+
+	/*
+	 * If the user has specified a hostname (-H option)
+	 * then this is a remote access session.
+	 *
+	 * If no password was specified by any other method
+	 * and the authtype was not explicitly set to NONE
+	 * then prompt the user.
+	 */
+	if (hostname != NULL && password == NULL &&
+	    (authtype != IPMI_SESSION_AUTHTYPE_NONE || authtype < 0)) {
+#ifdef HAVE_GETPASSPHRASE
+		tmp = getpassphrase("Password: ");
+#else
+		tmp = getpass("Password: ");
+#endif
+		if (tmp != NULL) {
+			password = strdup(tmp);
+			if (password == NULL) {
+				lprintf(LOG_ERR, "%s: malloc failure", progname);
+				goto out_free;
+			}
+		}
+	}
+
+	/* if no interface was specified but a
+	 * hostname was then use LAN by default
+	 * otherwise the default is hardcoded
+	 * to use the first entry in the list
+	 */
+	if (intfname == NULL && hostname != NULL) {
+		intfname = strdup("lan");
+		if (intfname == NULL) {
+			lprintf(LOG_ERR, "%s: malloc failure", progname);
+			goto out_free;
+		}
+	}
+
+	/* load interface */
+	intf = ipmi_intf_load(intfname);
+	if (intf == NULL) {
+		lprintf(LOG_ERR, "Error loading interface %s", intfname);
+		goto out_free;
+	}
+
+	/* setup log */
+	log_init(progname, 0, verbose);
+
+	/* run OEM setup if found */
+	if (oemtype != NULL &&
+	    ipmi_oem_setup(intf, oemtype) < 0) {
+		lprintf(LOG_ERR, "OEM setup for \"%s\" failed", oemtype);
+		goto out_free;
+	}
+
+	/* set session variables */
+	if (hostname != NULL)
+		ipmi_intf_session_set_hostname(intf, hostname);
+	if (username != NULL)
+		ipmi_intf_session_set_username(intf, username);
+	if (password != NULL)
+		ipmi_intf_session_set_password(intf, password);
+	if (kgkey != NULL)
+		ipmi_intf_session_set_kgkey(intf, kgkey);
+	if (port > 0)
+		ipmi_intf_session_set_port(intf, port);
+	if (authtype >= 0)
+		ipmi_intf_session_set_authtype(intf, (uint8_t)authtype);
+	if (privlvl > 0)
+		ipmi_intf_session_set_privlvl(intf, (uint8_t)privlvl);
+	else
+		ipmi_intf_session_set_privlvl(intf,
+		      IPMI_SESSION_PRIV_ADMIN);	/* default */
+
+	ipmi_intf_session_set_sol_escape_char(intf, sol_escape_char);
+	ipmi_intf_session_set_cipher_suite_id(intf, cipher_suite_id);
+
+	/* setup destination lun if given */
+	intf->target_lun = target_lun ;
+
+	/* setup destination channel if given */
+	intf->target_channel = target_channel ;
+
+	/* setup IPMB local and target address if given */
+	intf->my_addr = my_addr ? : IPMI_BMC_SLAVE_ADDR;
+	if (target_addr > 0) {
+		/* need to open the interface first */
+		if (intf->open != NULL)
+			intf->open(intf);
+		intf->target_addr = target_addr;
+		/* must be admin level to do this over lan */
+		ipmi_intf_session_set_privlvl(intf, IPMI_SESSION_PRIV_ADMIN);
+	}
+
+	/* parse local SDR cache if given */
+	if (sdrcache != NULL) {
+		ipmi_sdr_list_cache_fromfile(intf, sdrcache);
+	}
+
+	/* Parse SEL OEM file if given */
+	if (seloem != NULL) {
+		ipmi_sel_oem_init(seloem);
+	}
+
+	intf->cmdlist = cmdlist;
+
+	/* now we finally run the command */
+	if (argc-optind > 0)
+		rc = ipmi_cmd_run(intf, argv[optind], argc-optind-1, &(argv[optind+1]));
+	else
+		rc = ipmi_cmd_run(intf, NULL, 0, NULL);
+
+	/* clean repository caches */
+	ipmi_cleanup(intf);
+
+	/* call interface close function if available */
+	if (intf->opened > 0 && intf->close != NULL)
+		intf->close(intf);
+
+ out_free:
+	log_halt();
+
+	if (intfname != NULL)
+		free(intfname);
+	if (hostname != NULL)
+		free(hostname);
+	if (username != NULL)
+		free(username);
+	if (password != NULL)
+		free(password);
+	if (oemtype != NULL)
+		free(oemtype);
+	if (seloem != NULL)
+		free(seloem);
+
+	return rc;
+}

ipmitool/lib/ipmi_mc.c

@@ -0,0 +1,572 @@
+/*
+ * Copyright (c) 2003 Sun Microsystems, Inc.  All Rights Reserved.
+ * 
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 
+ * Redistribution of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 
+ * Redistribution in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * 
+ * Neither the name of Sun Microsystems, Inc. or the names of
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ * 
+ * This software is provided "AS IS," without a warranty of any kind.
+ * ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND WARRANTIES,
+ * INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A
+ * PARTICULAR PURPOSE OR NON-INFRINGEMENT, ARE HEREBY EXCLUDED.
+ * SUN MICROSYSTEMS, INC. ("SUN") AND ITS LICENSORS SHALL NOT BE LIABLE
+ * FOR ANY DAMAGES SUFFERED BY LICENSEE AS A RESULT OF USING, MODIFYING
+ * OR DISTRIBUTING THIS SOFTWARE OR ITS DERIVATIVES.  IN NO EVENT WILL
+ * SUN OR ITS LICENSORS BE LIABLE FOR ANY LOST REVENUE, PROFIT OR DATA,
+ * OR FOR DIRECT, INDIRECT, SPECIAL, CONSEQUENTIAL, INCIDENTAL OR
+ * PUNITIVE DAMAGES, HOWEVER CAUSED AND REGARDLESS OF THE THEORY OF
+ * LIABILITY, ARISING OUT OF THE USE OF OR INABILITY TO USE THIS SOFTWARE,
+ * EVEN IF SUN HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
+ */
+
+#include <stdlib.h>
+#include <string.h>
+#include <stdio.h>
+#include <time.h>
+
+#include <ipmitool/helper.h>
+#include <ipmitool/log.h>
+#include <ipmitool/bswap.h>
+#include <ipmitool/ipmi.h>
+#include <ipmitool/ipmi_intf.h>
+#include <ipmitool/ipmi_mc.h>
+#include <ipmitool/ipmi_strings.h>
+
+extern int verbose;
+
+/* ipmi_mc_reset  -  attempt to reset an MC
+ *
+ * @intf:	ipmi interface
+ * @cmd:	reset command to send
+ *              BMC_WARM_RESET or
+ *              BMC_COLD_RESET
+ *
+ * returns 0 on success
+ * returns -1 on error
+ */
+static int
+ipmi_mc_reset(struct ipmi_intf * intf, int cmd)
+{
+	struct ipmi_rs * rsp;
+	struct ipmi_rq req;
+
+	intf->open(intf);
+
+	memset(&req, 0, sizeof(req));
+	req.msg.netfn = IPMI_NETFN_APP;
+	req.msg.cmd = cmd;
+	req.msg.data_len = 0;
+
+	if (cmd == BMC_COLD_RESET)
+		intf->noanswer = 1;
+
+	rsp = intf->sendrecv(intf, &req);
+
+	if (cmd == BMC_COLD_RESET)
+		intf->abort = 1;
+
+	printf("Sent %s reset command to MC\n",
+	       (cmd == BMC_WARM_RESET) ? "warm" : "cold");
+
+	return 0;
+}
+
+struct bmc_enables_data {
+#if WORDS_BIGENDIAN
+	uint8_t oem2		: 1;
+	uint8_t oem1		: 1;
+	uint8_t oem0		: 1;
+	uint8_t __reserved	: 1;
+	uint8_t system_event_log	: 1;
+	uint8_t event_msgbuf	: 1;
+	uint8_t event_msgbuf_intr	: 1;
+	uint8_t receive_msg_intr	: 1;
+#else
+	uint8_t receive_msg_intr	: 1;
+	uint8_t event_msgbuf_intr	: 1;
+	uint8_t event_msgbuf	: 1;
+	uint8_t system_event_log	: 1;
+	uint8_t __reserved	: 1;
+	uint8_t oem0		: 1;
+	uint8_t oem1		: 1;
+	uint8_t oem2		: 1;
+#endif
+} __attribute__ ((packed));
+
+struct bitfield_data {
+	const char * name;
+	const char * desc;
+	uint32_t mask;
+};
+
+struct bitfield_data mc_enables_bf[] = {
+	{
+		name:	"recv_msg_intr",
+		desc:	"Receive Message Queue Interrupt",
+		mask:	1<<0,
+	},
+	{
+		name:	"event_msg_intr",
+		desc:	"Event Message Buffer Full Interrupt",
+		mask:	1<<1,
+	},
+	{
+		name:	"event_msg",
+		desc:	"Event Message Buffer",
+		mask:	1<<2,
+	},
+	{
+		name:	"system_event_log",
+		desc:	"System Event Logging",
+		mask:	1<<3,
+	},
+	{
+		name:	"oem0",
+		desc:	"OEM 0",
+		mask:	1<<5,
+	},
+	{
+		name:	"oem1",
+		desc:	"OEM 1",
+		mask:	1<<6,
+	},
+	{
+		name:	"oem2",
+		desc:	"OEM 2",
+		mask:	1<<7,
+	},
+	{ NULL },
+};
+
+static void
+printf_mc_usage(void)
+{
+	struct bitfield_data * bf;
+	printf("MC Commands:\n");
+	printf("  reset <warm|cold>\n");
+	printf("  info\n");
+	printf("  selftest\n");
+	printf("  getenables\n");
+	printf("  setenables <option=on|off> ...\n");
+
+	for (bf = mc_enables_bf; bf->name != NULL; bf++) {
+		printf("    %-20s  %s\n", bf->name, bf->desc);
+	}
+}
+
+/* ipmi_mc_get_enables  -  print out MC enables
+ *
+ * @intf:	ipmi inteface
+ *
+ * returns 0 on success
+ * returns -1 on error
+ */
+static int
+ipmi_mc_get_enables(struct ipmi_intf * intf)
+{
+	struct ipmi_rs * rsp;
+	struct ipmi_rq req;
+	struct bitfield_data * bf;
+
+	memset(&req, 0, sizeof(req));
+	req.msg.netfn = IPMI_NETFN_APP;
+	req.msg.cmd = BMC_GET_GLOBAL_ENABLES;
+
+	rsp = intf->sendrecv(intf, &req);
+	if (rsp == NULL) {
+		lprintf(LOG_ERR, "Get Global Enables command failed");
+		return -1;
+	}
+	if (rsp->ccode > 0) {
+		lprintf(LOG_ERR, "Get Global Enables command failed: %s",
+		       val2str(rsp->ccode, completion_code_vals));
+		return -1;
+	}
+
+	for (bf = mc_enables_bf; bf->name != NULL; bf++) {
+		printf("%-40s : %sabled\n", bf->desc,
+		       rsp->data[0] & bf->mask ? "en" : "dis");
+	}
+
+	return 0;
+}
+
+/* ipmi_mc_set_enables  -  set MC enable flags
+ *
+ * @intf:	ipmi inteface
+ * @argc:	argument count
+ * @argv:	argument list
+ *
+ * returns 0 on success
+ * returns -1 on error
+ */
+static int
+ipmi_mc_set_enables(struct ipmi_intf * intf, int argc, char ** argv)
+{
+	struct ipmi_rs * rsp;
+	struct ipmi_rq req;
+	struct bitfield_data * bf;
+	uint8_t en;
+	int i;
+
+	if (argc < 1 || strncmp(argv[0], "help", 4) == 0) {
+		printf_mc_usage();
+		return 0;
+	}
+
+	memset(&req, 0, sizeof(req));
+	req.msg.netfn = IPMI_NETFN_APP;
+	req.msg.cmd = BMC_GET_GLOBAL_ENABLES;
+
+	rsp = intf->sendrecv(intf, &req);
+	if (rsp == NULL) {
+		lprintf(LOG_ERR, "Get Global Enables command failed");
+		return -1;
+	}
+	if (rsp->ccode > 0) {
+		lprintf(LOG_ERR, "Get Global Enables command failed: %s",
+		       val2str(rsp->ccode, completion_code_vals));
+		return -1;
+	}
+
+	en = rsp->data[0];
+
+	for (i = 0; i < argc; i++) {
+		for (bf = mc_enables_bf; bf->name != NULL; bf++) {
+			int nl = strlen(bf->name);
+			if (strncmp(argv[i], bf->name, nl) != 0)
+				continue;
+			if (strncmp(argv[i]+nl+1, "off", 3) == 0) {
+				printf("Disabling %s\n", bf->desc);
+				en &= ~bf->mask;
+			}
+			else if (strncmp(argv[i]+nl+1, "on", 2) == 0) {
+				printf("Enabling %s\n", bf->desc);
+				en |= bf->mask;
+			}
+			else {
+				lprintf(LOG_ERR, "Unrecognized option: %s", argv[i]);
+			}
+		}
+	}
+
+	if (en == rsp->data[0]) {
+		printf("\nNothing to change...\n");
+		ipmi_mc_get_enables(intf);
+		return 0;
+	}
+
+	req.msg.cmd = BMC_SET_GLOBAL_ENABLES;
+	req.msg.data = &en;
+	req.msg.data_len = 1;
+
+	rsp = intf->sendrecv(intf, &req);
+	if (rsp == NULL) {
+		lprintf(LOG_ERR, "Set Global Enables command failed");
+		return -1;
+	}
+	else if (rsp->ccode > 0) {
+		lprintf(LOG_ERR, "Set Global Enables command failed: %s",
+			val2str(rsp->ccode, completion_code_vals));
+		return -1;
+	}
+
+	printf("\nVerifying...\n");
+	ipmi_mc_get_enables(intf);
+
+	return 0;
+}
+
+/* IPM Device, Get Device ID Command - Additional Device Support */
+const char *ipm_dev_adtl_dev_support[8] = {
+        "Sensor Device",         /* bit 0 */
+        "SDR Repository Device", /* bit 1 */
+        "SEL Device",            /* bit 2 */
+        "FRU Inventory Device",  /*  ...  */
+        "IPMB Event Receiver",
+        "IPMB Event Generator",
+        "Bridge",
+        "Chassis Device"         /* bit 7 */
+};
+
+/* ipmi_mc_get_deviceid  -  print information about this MC
+ *
+ * @intf:	ipmi interface
+ *
+ * returns 0 on success
+ * returns -1 on error
+ */
+static int
+ipmi_mc_get_deviceid(struct ipmi_intf * intf)
+{
+	struct ipmi_rs * rsp;
+	struct ipmi_rq req;
+	struct ipm_devid_rsp *devid;
+	int i;
+
+	memset(&req, 0, sizeof(req));
+	req.msg.netfn = IPMI_NETFN_APP;
+	req.msg.cmd = BMC_GET_DEVICE_ID;
+	req.msg.data_len = 0;
+
+	rsp = intf->sendrecv(intf, &req);
+	if (rsp == NULL) {
+		lprintf(LOG_ERR, "Get Device ID command failed");
+		return -1;
+	}
+	if (rsp->ccode > 0) {
+		lprintf(LOG_ERR, "Get Device ID command failed: %s",
+			val2str(rsp->ccode, completion_code_vals));
+		return -1;
+	}
+
+	devid = (struct ipm_devid_rsp *) rsp->data;
+	printf("Device ID                 : %i\n", 
+		devid->device_id);
+	printf("Device Revision           : %i\n",
+		devid->device_revision & IPM_DEV_DEVICE_ID_REV_MASK);
+	printf("Firmware Revision         : %u.%x\n",
+		devid->fw_rev1 & IPM_DEV_FWREV1_MAJOR_MASK,
+		devid->fw_rev2);
+	printf("IPMI Version              : %x.%x\n",
+		IPM_DEV_IPMI_VERSION_MAJOR(devid->ipmi_version),
+		IPM_DEV_IPMI_VERSION_MINOR(devid->ipmi_version));
+	printf("Manufacturer ID           : %lu\n",
+           (long)IPM_DEV_MANUFACTURER_ID(devid->manufacturer_id));
+   printf("Manufacturer Name         : %s\n",
+            val2str( (long)IPM_DEV_MANUFACTURER_ID(devid->manufacturer_id), 
+            ipmi_oem_info) );
+
+	printf("Product ID                : %u (0x%02x%02x)\n",
+		buf2short((uint8_t *)(devid->product_id)),
+		devid->product_id[1], devid->product_id[0]);
+	printf("Device Available          : %s\n",
+		(devid->fw_rev1 & IPM_DEV_FWREV1_AVAIL_MASK) ? 
+		"no" : "yes");
+	printf("Provides Device SDRs      : %s\n",
+		(devid->device_revision & IPM_DEV_DEVICE_ID_SDR_MASK) ?
+		"yes" : "no");
+	printf("Additional Device Support :\n");
+	for (i = 0; i < IPM_DEV_ADTL_SUPPORT_BITS; i++) {
+		if (devid->adtl_device_support & (1 << i)) {
+			printf("    %s\n", ipm_dev_adtl_dev_support[i]);
+		}
+	}
+	printf("Aux Firmware Rev Info     : \n");
+	/* These values could be looked-up by vendor if documented,
+	 * so we put them on individual lines for better treatment later
+	 */
+	printf("    0x%02x\n    0x%02x\n    0x%02x\n    0x%02x\n",
+		devid->aux_fw_rev[0], devid->aux_fw_rev[1],
+		devid->aux_fw_rev[2], devid->aux_fw_rev[3]);
+	return 0;
+}
+
+struct ipmi_guid {
+	uint32_t  time_low;	/* timestamp low field */
+	uint16_t  time_mid;	/* timestamp middle field */
+	uint16_t  time_hi_and_version; /* timestamp high field and version number */
+	uint8_t   clock_seq_hi_variant;/* clock sequence high field and variant */
+	uint8_t   clock_seq_low; /* clock sequence low field */
+	uint8_t   node[6];	/* node */
+} __attribute__((packed));
+
+/* ipmi_mc_get_guid  -  print this MC GUID
+ *
+ * @intf:	ipmi interface
+ *
+ * returns 0 on success
+ * returns -1 on error
+ */
+static int
+ipmi_mc_get_guid(struct ipmi_intf * intf)
+{
+	struct ipmi_rs * rsp;
+	struct ipmi_rq req;
+	struct ipmi_guid guid;
+
+	memset(&req, 0, sizeof(req));
+	req.msg.netfn = IPMI_NETFN_APP;
+	req.msg.cmd = BMC_GET_GUID;
+
+	rsp = intf->sendrecv(intf, &req);
+	if (rsp == NULL) {
+		lprintf(LOG_ERR, "Get GUID command failed");
+		return -1;
+	}
+	if (rsp->ccode > 0) {
+		lprintf(LOG_ERR, "Get GUID command failed: %s",
+			val2str(rsp->ccode, completion_code_vals));
+		return -1;
+	}
+
+	if (rsp->data_len == sizeof(struct ipmi_guid)) {
+		char tbuf[40];
+		time_t s;
+		memset(tbuf, 0, 40);
+		memset(&guid, 0, sizeof(struct ipmi_guid));
+		memcpy(&guid, rsp->data, rsp->data_len);
+
+		printf("System GUID  : %08x-%04x-%04x-%04x-%02x%02x%02x%02x%02x%02x\n",
+		       guid.time_low, guid.time_mid, guid.time_hi_and_version,
+		       guid.clock_seq_hi_variant << 8 | guid.clock_seq_low,
+		       guid.node[5], guid.node[4], guid.node[3],
+		       guid.node[2], guid.node[1], guid.node[0]);
+
+		s = (time_t)BSWAP_32(guid.time_low);
+		strftime(tbuf, sizeof(tbuf), "%m/%d/%Y %H:%M:%S", localtime(&s));
+		printf("Timestamp    : %s\n", tbuf);
+	}
+	else {
+		lprintf(LOG_ERR, "Invalid GUID length %d", rsp->data_len);
+	}
+
+	return 0;
+}
+
+/* ipmi_mc_get_selftest -  returns and print selftest results
+ *
+ * @intf:	ipmi interface
+ */
+static int ipmi_mc_get_selftest(struct ipmi_intf * intf)
+{
+   int rv = 0;
+	struct ipmi_rs * rsp;
+	struct ipmi_rq req;
+	struct ipm_selftest_rsp *sft_res;
+
+	memset(&req, 0, sizeof(req));
+	req.msg.netfn = IPMI_NETFN_APP;
+	req.msg.cmd = BMC_GET_SELF_TEST;
+	req.msg.data_len = 0;
+
+	rsp = intf->sendrecv(intf, &req);
+	if (!rsp) {
+		lprintf(LOG_ERR, "No response from devices\n"); 
+		return -1;
+	}
+	if (rsp->ccode) {
+	   lprintf(LOG_ERR, "Bad response: (%s)",
+	                                 val2str(rsp->ccode, completion_code_vals));
+		return -1;
+	}
+
+	sft_res = (struct ipm_selftest_rsp *) rsp->data;
+
+	if (sft_res->code == IPM_SFT_CODE_OK) {
+		printf("Selftest: passed\n");
+		rv = 0;
+	}
+
+	else if (sft_res->code == IPM_SFT_CODE_NOT_IMPLEMENTED) {
+		printf("Selftest: not implemented\n");
+		rv = -1;
+	}
+
+	else if (sft_res->code == IPM_SFT_CODE_DEV_CORRUPTED) {
+		printf("Selftest: device corrupted\n");
+		rv = -1;
+
+		if (sft_res->test & IPM_SELFTEST_SEL_ERROR) {
+			printf(" -> SEL device not accessible\n");
+		}
+		if (sft_res->test & IPM_SELFTEST_SDR_ERROR) {
+			printf(" -> SDR repository not accesible\n");
+		}
+		if (sft_res->test & IPM_SELFTEST_FRU_ERROR) {
+			printf("FRU device not accessible\n");
+		}
+		if (sft_res->test & IPM_SELFTEST_IPMB_ERROR) {
+			printf("IPMB signal lines do not respond\n");
+		}
+		if (sft_res->test & IPM_SELFTEST_SDRR_EMPTY) {
+			printf("SDR repository empty\n");
+		}
+		if (sft_res->test & IPM_SELFTEST_INTERNAL_USE) {
+			printf("Internal Use Area corrupted\n");
+		}
+		if (sft_res->test & IPM_SELFTEST_FW_BOOTBLOCK) {
+			printf("Controller update boot block corrupted\n");
+		}
+		if (sft_res->test & IPM_SELFTEST_FW_CORRUPTED) {
+			printf("controller operational firmware corrupted\n");
+		}
+	}
+	else if (sft_res->code == IPM_SFT_CODE_FATAL_ERROR) {
+		printf("Selftest     : fatal error\n");
+		printf("Failure code : %02x\n", sft_res->test);
+		rv = -1;
+	}
+	else if (sft_res->code == IPM_SFT_CODE_RESERVED) {
+		printf("Selftest: N/A");
+		rv = -1;
+	}
+	else {
+		printf("Selttest     : device specific\n");
+		printf("Failure code : %02x\n", sft_res->test);
+		rv = 0;
+	}
+
+	return rv;
+}
+
+/* ipmi_mc_main  -  top-level handler for MC functions
+ *
+ * @intf:	ipmi interface
+ * @argc:	number of arguments
+ * @argv:	argument list
+ *
+ * returns 0 on success
+ * returns -1 on error
+ */
+int
+ipmi_mc_main(struct ipmi_intf * intf, int argc, char ** argv)
+{
+	int rc = 0;
+
+	if (argc < 1 || strncmp(argv[0], "help", 4) == 0) {
+		printf_mc_usage();
+	}
+	else if (strncmp(argv[0], "reset", 5) == 0) {
+		if (argc < 2 || strncmp(argv[1], "help", 4) == 0) {
+			lprintf(LOG_ERR, "reset commands: warm, cold");
+		}
+		else if (strncmp(argv[1], "cold", 4) == 0) {
+			rc = ipmi_mc_reset(intf, BMC_COLD_RESET);
+		}
+		else if (strncmp(argv[1], "warm", 4) == 0) {
+			rc = ipmi_mc_reset(intf, BMC_WARM_RESET);
+		}
+		else {
+			lprintf(LOG_ERR, "reset commands: warm, cold");
+		}
+	}
+	else if (strncmp(argv[0], "info", 4) == 0) {
+		rc = ipmi_mc_get_deviceid(intf);
+	}
+	else if (strncmp(argv[0], "guid", 4) == 0) {
+		rc = ipmi_mc_get_guid(intf);
+	}
+	else if (strncmp(argv[0], "getenables", 10) == 0) {
+		rc = ipmi_mc_get_enables(intf);
+	}
+	else if (strncmp(argv[0], "setenables", 10) == 0) {
+		rc = ipmi_mc_set_enables(intf, argc-1, &(argv[1]));
+	}
+   else if (!strncmp(argv[0], "selftest", 8)) {
+		rc = ipmi_mc_get_selftest(intf);
+	}
+
+	return rc;
+}

ipmitool/lib/ipmi_oem.c

@@ -0,0 +1,167 @@
+/*
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 
+ * Redistribution of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 
+ * Redistribution in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * 
+ * Neither the name of Sun Microsystems, Inc. or the names of
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ * 
+ * This software is provided "AS IS," without a warranty of any kind.
+ * ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND WARRANTIES,
+ * INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A
+ * PARTICULAR PURPOSE OR NON-INFRINGEMENT, ARE HEREBY EXCLUDED.
+ * SUN MICROSYSTEMS, INC. ("SUN") AND ITS LICENSORS SHALL NOT BE LIABLE
+ * FOR ANY DAMAGES SUFFERED BY LICENSEE AS A RESULT OF USING, MODIFYING
+ * OR DISTRIBUTING THIS SOFTWARE OR ITS DERIVATIVES.  IN NO EVENT WILL
+ * SUN OR ITS LICENSORS BE LIABLE FOR ANY LOST REVENUE, PROFIT OR DATA,
+ * OR FOR DIRECT, INDIRECT, SPECIAL, CONSEQUENTIAL, INCIDENTAL OR
+ * PUNITIVE DAMAGES, HOWEVER CAUSED AND REGARDLESS OF THE THEORY OF
+ * LIABILITY, ARISING OUT OF THE USE OF OR INABILITY TO USE THIS SOFTWARE,
+ * EVEN IF SUN HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
+ */
+
+#include <string.h>
+
+#include <ipmitool/ipmi.h>
+#include <ipmitool/ipmi_intf.h>
+#include <ipmitool/ipmi_constants.h>
+#include <ipmitool/log.h>
+#include <ipmitool/helper.h>
+#include <ipmitool/ipmi_sel.h>
+
+static int ipmi_oem_supermicro(struct ipmi_intf * intf);
+static int ipmi_oem_ibm(struct ipmi_intf * intf);
+
+static struct ipmi_oem_handle ipmi_oem_list[] = {
+	{
+		name:	"supermicro",
+		desc:	"Supermicro IPMIv1.5 BMC with OEM LAN authentication support",
+		setup:	ipmi_oem_supermicro,
+	},
+	{
+		name:	"intelwv2",
+		desc:	"Intel SE7501WV2 IPMIv1.5 BMC with extra LAN communication support",
+	},
+	{
+		name:	"intelplus",
+		desc:	"Intel IPMI 2.0 BMC with RMCP+ communication support",
+	},
+	{
+		name:   "icts",
+		desc:   "IPMI 2.0 ICTS compliance support",
+	},
+	{
+		name:   "ibm",
+		desc:   "IBM OEM support",
+		setup:	ipmi_oem_ibm,
+	},
+	{ 0 },
+};
+
+/* Supermicro IPMIv2 BMCs use OEM authtype */
+static int
+ipmi_oem_supermicro(struct ipmi_intf * intf)
+{
+	ipmi_intf_session_set_authtype(intf, IPMI_SESSION_AUTHTYPE_OEM);
+	return 0;
+}
+
+static int
+ipmi_oem_ibm(struct ipmi_intf * intf)
+{
+	char * filename;
+	if ((filename = getenv("IPMI_OEM_IBM_DATAFILE")) == NULL) {
+		lprintf(LOG_ERR, "Unable to read IPMI_OEM_IBM_DATAFILE from environment");
+		return -1;
+	}
+	return ipmi_sel_oem_init((const char *)filename);
+}
+
+/* ipmi_oem_print  -  print list of OEM handles
+ */
+void
+ipmi_oem_print(void)
+{
+	struct ipmi_oem_handle * oem;
+	lprintf(LOG_NOTICE, "\nOEM Support:");
+	for (oem=ipmi_oem_list; oem->name != NULL && oem->desc != NULL; oem++) {
+		lprintf(LOG_NOTICE, "\t%-12s %s", oem->name, oem->desc);
+	}
+	lprintf(LOG_NOTICE, "");
+}
+
+/* ipmi_oem_setup  -  do initial setup of OEM handle
+ *
+ * @intf:	ipmi interface
+ * @oemtype:	OEM handle name
+ *
+ * returns 0 on success
+ * returns -1 on error
+ */
+int
+ipmi_oem_setup(struct ipmi_intf * intf, char * oemtype)
+{
+	struct ipmi_oem_handle * oem;
+	int i;
+	int rc = 0;
+
+	if (strncmp(oemtype, "help", 4) == 0 ||
+	    strncmp(oemtype, "list", 4) == 0 ||
+	    oemtype == NULL) {
+		ipmi_oem_print();
+		return -1;
+	}
+
+	for (oem=ipmi_oem_list, i=0; i < sizeof(ipmi_oem_list)/sizeof(struct ipmi_oem_handle); oem++, i++) {
+		if (oem->name == NULL)
+			continue;
+		if (strncmp(oemtype, oem->name, strlen(oem->name)) == 0)
+			break;
+	}
+
+	if (oem->name == NULL) {
+		/* nothing was found */
+		lprintf(LOG_ERR, "OEM support not found for \"%s\"", oemtype);
+		return -1;
+	}
+
+	/* save pointer for later use */
+	intf->oem = oem;
+
+	/* run optional setup function if it is defined */
+	if (oem->setup != NULL) {
+		lprintf(LOG_DEBUG, "Running OEM setup for \"%s\"", oem->desc);
+		rc = oem->setup(intf);
+	}
+
+	return rc;
+}
+
+/* ipmi_oem_active  -  used to determine if a particular OEM type is set
+ *
+ * @intf:	ipmi interface
+ * @oemtype:	string containing name of ipmi handle to check
+ *
+ * returns 1 if requested ipmi handle is active
+ * returns 0 otherwise
+ */
+int
+ipmi_oem_active(struct ipmi_intf * intf, const char * oemtype)
+{
+	if (intf->oem == NULL)
+		return 0;
+
+	if (strncmp(intf->oem->name, oemtype, strlen(oemtype)) == 0)
+		return 1;
+
+	return 0;
+}
+

ipmitool/lib/ipmi_pef.c

@@ -0,0 +1,866 @@
+/*
+ * Copyright (c) 2004 Dell Computers.  All Rights Reserved.
+ * 
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 
+ * Redistribution of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 
+ * Redistribution in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * 
+ * Neither the name of Dell Computers, or the names of
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ * 
+ * This software is provided "AS IS," without a warranty of any kind.
+ * ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND WARRANTIES,
+ * INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A
+ * PARTICULAR PURPOSE OR NON-INFRINGEMENT, ARE HEREBY EXCLUDED.
+ * DELL COMPUTERS ("DELL") AND ITS LICENSORS SHALL NOT BE LIABLE
+ * FOR ANY DAMAGES SUFFERED BY LICENSEE AS A RESULT OF USING, MODIFYING
+ * OR DISTRIBUTING THIS SOFTWARE OR ITS DERIVATIVES.  IN NO EVENT WILL
+ * DELL OR ITS LICENSORS BE LIABLE FOR ANY LOST REVENUE, PROFIT OR DATA,
+ * OR FOR DIRECT, INDIRECT, SPECIAL, CONSEQUENTIAL, INCIDENTAL OR
+ * PUNITIVE DAMAGES, HOWEVER CAUSED AND REGARDLESS OF THE THEORY OF
+ * LIABILITY, ARISING OUT OF THE USE OF OR INABILITY TO USE THIS SOFTWARE,
+ * EVEN IF DELL HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
+ */
+
+#include <string.h>
+#include <math.h>
+#include <time.h>
+
+#include <ipmitool/helper.h>
+#include <ipmitool/log.h>
+#include <ipmitool/ipmi.h>
+#include <ipmitool/ipmi_intf.h>
+#include <ipmitool/ipmi_pef.h>
+
+extern int verbose;
+/*
+// common kywd/value printf() templates
+*/
+static const char * pef_fld_fmts[][2] = {
+	{"%-*s : %u\n",          " | %u"},			/* F_DEC: unsigned value */
+	{"%-*s : %d\n",          " | %d"},			/* F_INT: signed value   */
+	{"%-*s : %s\n",          " | %s"},			/* F_STR: string value   */
+	{"%-*s : 0x%x\n",        " | 0x%x"},		/* F_HEX: "N hex digits" */
+	{"%-*s : 0x%04x\n",      " | 0x%04x"},		/* F_2XD: "2 hex digits" */
+	{"%-*s : 0x%02x\n",      " | 0x%02x"},		/* F_1XD: "1 hex digit"  */
+	{"%-*s : %02x%02x%02x%02x-%02x%02x-%02x%02x-%02x%02x-%02x%02x%02x%02x%02x%02x\n",
+	     " | %02x%02x%02x%02x-%02x%02x-%02x%02x-%02x%02x-%02x%02x%02x%02x%02x%02x"},
+};
+typedef enum {
+	F_DEC,
+	F_INT,
+	F_STR,
+	F_HEX,
+	F_2XD,
+	F_1XD,
+	F_UID,
+} fmt_e;
+#define KYWD_LENGTH 24
+static int first_field = 1;
+
+static const char * pef_flag_fmts[][3] = {
+	{"",          "false",  "true"},
+	{"supported", "un",         ""},
+	{"active",    "in",         ""},
+	{"abled",     "dis",      "en"},
+};
+static const char * listitem[] =	{" | %s", ",%s", "%s"};
+
+const char * 
+ipmi_pef_bit_desc(struct bit_desc_map * map, uint32_t value)
+{	/*
+	// return description/text label(s) for the given value.
+	//  NB: uses a static buffer
+	*/
+	static char buf[128];
+	char * p;
+	struct desc_map * pmap;
+	uint32_t match, index;
+	
+	*(p = buf) = '\0';
+	index = 2;
+	for (pmap=map->desc_maps; pmap && pmap->desc; pmap++) {
+		if (map->desc_map_type == BIT_DESC_MAP_LIST)
+			match = (value == pmap->mask);
+		else
+			match = ((value & pmap->mask) == pmap->mask);
+
+		if (match) {
+			sprintf(p, listitem[index], pmap->desc);
+			p = strchr(p, '\0');
+			if (map->desc_map_type != BIT_DESC_MAP_ALL)
+				break;
+			index = 1;
+		}
+	}
+	if (p == buf)
+		return("None");
+
+	return((const char *)buf);
+}
+
+void
+ipmi_pef_print_flags(struct bit_desc_map * map, flg_e type, uint32_t val)
+{	/*
+	// print features/flags, using val (a bitmask), according to map.
+	// observe the verbose flag, and print any labels, etc. based on type
+	*/
+	struct desc_map * pmap;
+	uint32_t maskval, index;
+
+	index = 0;
+	for (pmap=map->desc_maps; pmap && pmap->desc; pmap++) {
+		maskval = (val & pmap->mask);
+		if (verbose)
+			printf("%-*s : %s%s\n", KYWD_LENGTH, 
+				ipmi_pef_bit_desc(map, pmap->mask),
+				pef_flag_fmts[type][1 + (maskval != 0)],
+				pef_flag_fmts[type][0]);
+		else if (maskval != 0) {
+			printf(listitem[index], ipmi_pef_bit_desc(map, maskval));
+			index = 1;
+		}
+	}
+}
+
+static void
+ipmi_pef_print_field(const char * fmt[2], const char * label, unsigned long val)
+{	/*
+	// print a 'field' (observes 'verbose' flag)
+	*/
+	if (verbose)
+		printf(fmt[0], KYWD_LENGTH, label, val);
+	else if (first_field)
+		printf(&fmt[1][2], val);	/* skip field separator */
+	else
+		printf(fmt[1], val);
+
+	first_field = 0;
+}
+
+void
+ipmi_pef_print_dec(const char * text, uint32_t val)
+{	/* unsigned */
+	ipmi_pef_print_field(pef_fld_fmts[F_DEC], text, val);
+}
+
+void
+ipmi_pef_print_int(const char * text, uint32_t val)
+{	/* signed */
+	ipmi_pef_print_field(pef_fld_fmts[F_INT], text, val);
+}
+
+void
+ipmi_pef_print_hex(const char * text, uint32_t val)
+{	/* hex */
+	ipmi_pef_print_field(pef_fld_fmts[F_HEX], text, val);
+}
+
+void 
+ipmi_pef_print_str(const char * text, const char * val)
+{	/* string */
+	ipmi_pef_print_field(pef_fld_fmts[F_STR], text, (unsigned long)val);
+}
+
+void 
+ipmi_pef_print_2xd(const char * text, uint8_t u1, uint8_t u2)
+{	/* 2 hex digits */
+	uint32_t val = ((u1 << 8) + u2) & 0xffff;
+	ipmi_pef_print_field(pef_fld_fmts[F_2XD], text, val);
+}
+
+void 
+ipmi_pef_print_1xd(const char * text, uint32_t val)
+{	/* 1 hex digit */
+	ipmi_pef_print_field(pef_fld_fmts[F_1XD], text, val);
+}
+
+static struct ipmi_rs * 
+ipmi_pef_msg_exchange(struct ipmi_intf * intf, struct ipmi_rq * req, char * txt)
+{	/*
+	// common IPMItool rqst/resp handling
+	*/
+	struct ipmi_rs * rsp = intf->sendrecv(intf, req);
+	if (!rsp)
+		return(NULL);
+	if (rsp->ccode) {
+		lprintf(LOG_ERR, " **Error %x in '%s' command",
+			rsp ? rsp->ccode : 0, txt);
+		return(NULL);
+	}
+	if (verbose > 2)
+		printbuf(rsp->data, rsp->data_len, txt);
+	return(rsp);
+}
+
+static uint8_t
+ipmi_pef_get_policy_table(struct ipmi_intf * intf,
+									struct pef_cfgparm_policy_table_entry ** table)
+{	/*
+	// get the PEF policy table: allocate space, fillin, and return its size 
+	//  NB: the caller must free the returned area (when returned size > 0)
+	*/
+	struct ipmi_rs * rsp;
+	struct ipmi_rq req;
+	struct pef_cfgparm_selector psel;
+	struct pef_cfgparm_policy_table_entry * ptbl, * ptmp;
+	uint32_t i;
+	uint8_t tbl_size;
+
+	memset(&psel, 0, sizeof(psel));
+	psel.id = PEF_CFGPARM_ID_PEF_ALERT_POLICY_TABLE_SIZE;
+	memset(&req, 0, sizeof(req));
+	req.msg.netfn = IPMI_NETFN_SE;
+	req.msg.cmd = IPMI_CMD_GET_PEF_CONFIG_PARMS;
+	req.msg.data = (uint8_t *)&psel;
+	req.msg.data_len = sizeof(psel);
+	rsp = ipmi_pef_msg_exchange(intf, &req, "Alert policy table size");
+	if (!rsp)
+		return(0);
+	tbl_size = (rsp->data[1] & PEF_POLICY_TABLE_SIZE_MASK);
+	i = (tbl_size * sizeof(struct pef_cfgparm_policy_table_entry));
+	if (!i
+	|| (ptbl = (struct pef_cfgparm_policy_table_entry *)malloc(i)) == NULL)
+		return(0);
+
+	memset(&psel, 0, sizeof(psel));
+	psel.id = PEF_CFGPARM_ID_PEF_ALERT_POLICY_TABLE_ENTRY;
+	for (ptmp=ptbl, i=1; i<=tbl_size; i++) {
+		psel.set = (i & PEF_POLICY_TABLE_ID_MASK);
+		rsp = ipmi_pef_msg_exchange(intf, &req, "Alert policy table entry");
+		if (!rsp
+		|| i != (rsp->data[1] & PEF_POLICY_TABLE_ID_MASK)) {
+			lprintf(LOG_ERR, " **Error retrieving %s",
+				"Alert policy table entry");
+			free(ptbl);
+			ptbl = NULL;
+			tbl_size = 0;
+			break;
+		}
+		memcpy(ptmp, &rsp->data[1], sizeof(*ptmp));
+		ptmp++;
+	}
+
+	*table = ptbl;
+	return(tbl_size);
+}
+
+static void
+ipmi_pef_print_lan_dest(struct ipmi_intf * intf, uint8_t ch, uint8_t dest)
+{	/*
+	// print LAN alert destination info
+	*/
+	struct ipmi_rs * rsp;
+	struct ipmi_rq req;
+	struct pef_lan_cfgparm_selector lsel;
+	struct pef_lan_cfgparm_dest_type * ptype;
+	struct pef_lan_cfgparm_dest_info * pinfo;
+	char buf[32];
+	uint8_t tbl_size, dsttype, timeout, retries;
+
+	memset(&lsel, 0, sizeof(lsel));
+	lsel.id = PEF_LAN_CFGPARM_ID_DEST_COUNT;
+	lsel.ch = ch;
+	memset(&req, 0, sizeof(req));
+	req.msg.netfn = IPMI_NETFN_TRANSPORT;
+	req.msg.cmd = IPMI_CMD_LAN_GET_CONFIG;
+	req.msg.data = (uint8_t *)&lsel;
+	req.msg.data_len = sizeof(lsel);
+	rsp = ipmi_pef_msg_exchange(intf, &req, "Alert destination count");
+	if (!rsp) {
+		lprintf(LOG_ERR, " **Error retrieving %s",
+			"Alert destination count");
+		return;
+	}
+	tbl_size = (rsp->data[1] & PEF_LAN_DEST_TABLE_SIZE_MASK);
+	//if (tbl_size == 0 || dest == 0)	/* LAN alerting not supported */
+	//	return;
+
+	lsel.id = PEF_LAN_CFGPARM_ID_DESTTYPE;
+	lsel.set = dest;
+	rsp = ipmi_pef_msg_exchange(intf, &req, "Alert destination type");
+	if (!rsp || rsp->data[1] != lsel.set) {
+		lprintf(LOG_ERR, " **Error retrieving %s",
+			"Alert destination type");
+		return;
+	}
+	ptype = (struct pef_lan_cfgparm_dest_type *)&rsp->data[1];
+	dsttype = (ptype->dest_type & PEF_LAN_DEST_TYPE_MASK);
+	timeout = ptype->alert_timeout;
+	retries = (ptype->retries & PEF_LAN_RETRIES_MASK);
+	ipmi_pef_print_str("Alert destination type", 
+				ipmi_pef_bit_desc(&pef_b2s_lan_desttype, dsttype));
+	if (dsttype == PEF_LAN_DEST_TYPE_PET) {
+		lsel.id = PEF_LAN_CFGPARM_ID_PET_COMMUNITY;
+		lsel.set = 0;
+		rsp = ipmi_pef_msg_exchange(intf, &req, "PET community");
+		if (!rsp)
+			lprintf(LOG_ERR, " **Error retrieving %s",
+				"PET community");
+		else {
+			rsp->data[19] = '\0';
+			ipmi_pef_print_str("PET Community", (const char *)&rsp->data[1]);
+		}
+	}
+	ipmi_pef_print_dec("ACK timeout/retry (secs)", timeout);
+	ipmi_pef_print_dec("Retries", retries);
+
+	lsel.id = PEF_LAN_CFGPARM_ID_DESTADDR;
+	lsel.set = dest;
+	rsp = ipmi_pef_msg_exchange(intf, &req, "Alert destination info");
+	if (!rsp || rsp->data[1] != lsel.set)
+		lprintf(LOG_ERR, " **Error retrieving %s",
+			"Alert destination info");
+	else {
+		pinfo = (struct pef_lan_cfgparm_dest_info *)&rsp->data[1];
+		sprintf(buf, "%u.%u.%u.%u", 
+					pinfo->ip[0], pinfo->ip[1], pinfo->ip[2], pinfo->ip[3]);
+		ipmi_pef_print_str("IP address", buf);
+
+		sprintf(buf, "%02x:%02x:%02x:%02x:%02x:%02x", 
+					pinfo->mac[0], pinfo->mac[1], pinfo->mac[2], 
+					pinfo->mac[3], pinfo->mac[4], pinfo->mac[5]);
+		ipmi_pef_print_str("MAC address", buf);
+	}
+}
+
+static void
+ipmi_pef_print_serial_dest_dial(struct ipmi_intf * intf, char * label,
+											struct pef_serial_cfgparm_selector * ssel)
+{	/*
+	// print a dial string
+	*/
+#define BLOCK_SIZE 16
+	struct ipmi_rs * rsp;
+	struct ipmi_rq req;
+	struct pef_serial_cfgparm_selector tmp;
+	char * p, strval[(6 * BLOCK_SIZE) + 1];
+
+	memset(&tmp, 0, sizeof(tmp));
+	tmp.id = PEF_SERIAL_CFGPARM_ID_DEST_DIAL_STRING_COUNT;
+	memset(&req, 0, sizeof(req));
+	req.msg.netfn = IPMI_NETFN_TRANSPORT;
+	req.msg.cmd = IPMI_CMD_SERIAL_GET_CONFIG;
+	req.msg.data = (uint8_t *)&tmp;
+	req.msg.data_len = sizeof(tmp);
+	rsp = ipmi_pef_msg_exchange(intf, &req, "Dial string count");
+	if (!rsp || (rsp->data[1] & PEF_SERIAL_DIAL_STRING_COUNT_MASK) == 0)
+		return;	/* sssh, not supported */
+
+	memcpy(&tmp, ssel, sizeof(tmp));
+	tmp.id = PEF_SERIAL_CFGPARM_ID_DEST_DIAL_STRING;
+	tmp.block = 1;
+	memset(strval, 0, sizeof(strval));
+	p = strval;
+	for (;;) {
+		rsp = ipmi_pef_msg_exchange(intf, &req, label);
+		if (!rsp
+		|| (rsp->data[1] != ssel->id)
+		|| (rsp->data[2] != tmp.block)) {
+			lprintf(LOG_ERR, " **Error retrieving %s", label);
+			return;
+		}
+		memcpy(p, &rsp->data[3], BLOCK_SIZE);
+		if (strchr(p, '\0') <= (p + BLOCK_SIZE))
+			break;
+		if ((p += BLOCK_SIZE) >= &strval[sizeof(strval)-1])
+			break;
+		tmp.block++;
+	}
+
+	ipmi_pef_print_str(label, strval);
+#undef BLOCK_SIZE
+}
+
+static void
+ipmi_pef_print_serial_dest_tap(struct ipmi_intf * intf,
+											struct pef_serial_cfgparm_selector * ssel)
+{	/*
+	// print TAP destination info
+	*/
+	struct ipmi_rs * rsp;
+	struct ipmi_rq req;
+	struct pef_serial_cfgparm_selector tmp;
+	struct pef_serial_cfgparm_tap_svc_settings * pset;
+	uint8_t dialstr_id, setting_id;
+
+	memset(&tmp, 0, sizeof(tmp));
+	tmp.id = PEF_SERIAL_CFGPARM_ID_TAP_ACCT_COUNT;
+	memset(&req, 0, sizeof(req));
+	req.msg.netfn = IPMI_NETFN_TRANSPORT;
+	req.msg.cmd = IPMI_CMD_SERIAL_GET_CONFIG;
+	req.msg.data = (uint8_t *)&tmp;
+	req.msg.data_len = sizeof(tmp);
+	rsp = ipmi_pef_msg_exchange(intf, &req, "Number of TAP accounts");
+	if (!rsp || (rsp->data[1] & PEF_SERIAL_TAP_ACCT_COUNT_MASK) == 0)
+		return;	/* sssh, not supported */
+
+	memcpy(&tmp, ssel, sizeof(tmp));
+	tmp.id = PEF_SERIAL_CFGPARM_ID_TAP_ACCT_INFO;
+	rsp = ipmi_pef_msg_exchange(intf, &req, "TAP account info");
+	if (!rsp || (rsp->data[1] != tmp.set)) {
+		lprintf(LOG_ERR, " **Error retrieving %s",
+			"TAP account info");
+		return;
+	}
+	dialstr_id = (rsp->data[2] & PEF_SERIAL_TAP_ACCT_INFO_DIAL_STRING_ID_MASK);
+	dialstr_id >>= PEF_SERIAL_TAP_ACCT_INFO_DIAL_STRING_ID_SHIFT;
+	setting_id = (rsp->data[2] & PEF_SERIAL_TAP_ACCT_INFO_SVC_SETTINGS_ID_MASK);
+	tmp.set = dialstr_id;
+	ipmi_pef_print_serial_dest_dial(intf, "TAP Dial string", &tmp);
+
+	tmp.set = setting_id;
+	rsp = ipmi_pef_msg_exchange(intf, &req, "TAP service settings");
+	if (!rsp || (rsp->data[1] != tmp.set)) {
+		lprintf(LOG_ERR, " **Error retrieving %s",
+			"TAP service settings");
+		return;
+	}
+	pset = (struct pef_serial_cfgparm_tap_svc_settings *)&rsp->data[1];
+	ipmi_pef_print_str("TAP confirmation",  
+		ipmi_pef_bit_desc(&pef_b2s_tap_svc_confirm, pset->confirmation_flags));
+
+	/* TODO : additional TAP settings? */
+}
+
+static void
+ipmi_pef_print_serial_dest_ppp(struct ipmi_intf * intf, 
+											struct pef_serial_cfgparm_selector * ssel)
+{	/*
+	// print PPP destination info
+	*/
+
+	/* TODO */
+}
+
+static void
+ipmi_pef_print_serial_dest_callback(struct ipmi_intf * intf,
+												struct pef_serial_cfgparm_selector * ssel)
+{	/*
+	// print callback destination info
+	*/
+
+	/* TODO */
+}
+
+static void
+ipmi_pef_print_serial_dest(struct ipmi_intf * intf, uint8_t ch, uint8_t dest)
+{	/*
+	// print Serial/PPP alert destination info
+	*/
+	struct ipmi_rs * rsp;
+	struct ipmi_rq req;
+	struct pef_serial_cfgparm_selector ssel;
+	uint8_t tbl_size, wrk;
+	struct pef_serial_cfgparm_dest_info * pinfo;
+
+	memset(&ssel, 0, sizeof(ssel));
+	ssel.id = PEF_SERIAL_CFGPARM_ID_DEST_COUNT;
+	ssel.ch = ch;
+	memset(&req, 0, sizeof(req));
+	req.msg.netfn = IPMI_NETFN_TRANSPORT;
+	req.msg.cmd = IPMI_CMD_SERIAL_GET_CONFIG;
+	req.msg.data = (uint8_t *)&ssel;
+	req.msg.data_len = sizeof(ssel);
+	rsp = ipmi_pef_msg_exchange(intf, &req, "Alert destination count");
+	if (!rsp) {
+		lprintf(LOG_ERR, " **Error retrieving %s",
+			"Alert destination count");
+		return;
+	}
+	tbl_size = (rsp->data[1] & PEF_SERIAL_DEST_TABLE_SIZE_MASK);
+	if (!dest || tbl_size == 0)	/* Page alerting not supported */
+		return;
+
+	ssel.id = PEF_SERIAL_CFGPARM_ID_DESTINFO;
+	ssel.set = dest;
+	rsp = ipmi_pef_msg_exchange(intf, &req, "Alert destination info");
+	if (!rsp || rsp->data[1] != ssel.set)
+		lprintf(LOG_ERR, " **Error retrieving %s",
+			"Alert destination info");
+	else {
+		pinfo = (struct pef_serial_cfgparm_dest_info *)rsp->data;
+		wrk = (pinfo->dest_type & PEF_SERIAL_DEST_TYPE_MASK);
+		ipmi_pef_print_str("Alert destination type", 
+					ipmi_pef_bit_desc(&pef_b2s_serial_desttype, wrk));
+		ipmi_pef_print_dec("ACK timeout (secs)",
+					pinfo->alert_timeout);
+		ipmi_pef_print_dec("Retries",
+					(pinfo->retries & PEF_SERIAL_RETRIES_MASK));
+		switch (wrk) {
+			case PEF_SERIAL_DEST_TYPE_DIAL:
+				ipmi_pef_print_serial_dest_dial(intf, "Serial dial string", &ssel);
+				break;
+			case PEF_SERIAL_DEST_TYPE_TAP:
+				ipmi_pef_print_serial_dest_tap(intf, &ssel);
+				break;
+			case PEF_SERIAL_DEST_TYPE_PPP:
+				ipmi_pef_print_serial_dest_ppp(intf, &ssel);
+				break;
+			case PEF_SERIAL_DEST_TYPE_BASIC_CALLBACK:
+			case PEF_SERIAL_DEST_TYPE_PPP_CALLBACK:
+				ipmi_pef_print_serial_dest_callback(intf, &ssel);
+				break;
+		}
+	}
+}
+
+static void
+ipmi_pef_print_dest(struct ipmi_intf * intf, uint8_t ch, uint8_t dest)
+{	/*
+	// print generic alert destination info
+	*/
+	ipmi_pef_print_dec("Destination ID", dest);
+}
+
+void
+ipmi_pef_print_event_info(struct pef_cfgparm_filter_table_entry * pef, char * buf)
+{	/*
+	//  print PEF entry Event info: class, severity, trigger, etc.
+	*/
+	static char * classes[] = {"Discrete", "Threshold", "OEM"};
+	uint16_t offmask;
+	char * p;
+	int i;
+	uint8_t t;
+
+	ipmi_pef_print_str("Event severity", 
+				ipmi_pef_bit_desc(&pef_b2s_severities, pef->entry.severity));
+
+	t = pef->entry.event_trigger;
+	if (t == PEF_EVENT_TRIGGER_THRESHOLD)
+		i = 1;
+	else if (t > PEF_EVENT_TRIGGER_SENSOR_SPECIFIC)
+		i = 2;
+	else
+		i = 0;
+	ipmi_pef_print_str("Event class", classes[i]);
+
+	offmask = ((pef->entry.event_data_1_offset_mask[1] << 8)
+	          + pef->entry.event_data_1_offset_mask[0]);
+
+	if (offmask == 0xffff || t == PEF_EVENT_TRIGGER_MATCH_ANY)
+		strcpy(buf, "Any");
+	else if (t == PEF_EVENT_TRIGGER_UNSPECIFIED)
+		strcpy(buf, "Unspecified");
+	else if (t == PEF_EVENT_TRIGGER_SENSOR_SPECIFIC)
+		strcpy(buf, "Sensor-specific");
+	else if (t > PEF_EVENT_TRIGGER_SENSOR_SPECIFIC)
+		strcpy(buf, "OEM");
+	else {
+		sprintf(buf, "(0x%02x/0x%04x)", t, offmask);
+		p = strchr(buf, '\0');
+		for (i=0; i<PEF_B2S_GENERIC_ER_ENTRIES; i++) {
+			if (offmask & 1) {
+				sprintf(p, ",%s", ipmi_pef_bit_desc(pef_b2s_generic_ER[t-1], i));
+				p = strchr(p, '\0');
+			}
+			offmask >>= 1;
+		}
+	}
+
+	ipmi_pef_print_str("Event trigger(s)", buf);
+}
+
+static void
+ipmi_pef_print_entry(struct ipmi_rs * rsp, uint8_t id,
+							struct pef_cfgparm_filter_table_entry * pef)
+{	/*
+	// print a PEF table entry
+	*/
+	uint8_t wrk, set;
+	char buf[128];
+
+	ipmi_pef_print_dec("PEF table entry", id);
+
+	wrk = !!(pef->entry.config & PEF_CONFIG_ENABLED);
+	sprintf(buf, "%sactive", (wrk ? "" : "in"));
+	if (pef->entry.config & PEF_CONFIG_PRECONFIGURED)
+		strcat(buf, ", pre-configured");
+
+	ipmi_pef_print_str("Status", buf);
+
+	if (wrk != 0) {
+		ipmi_pef_print_1xd("Version", rsp->data[0]);
+		ipmi_pef_print_str("Sensor type",
+					ipmi_pef_bit_desc(&pef_b2s_sensortypes, pef->entry.sensor_type));
+
+		if (pef->entry.sensor_number == PEF_SENSOR_NUMBER_MATCH_ANY)
+			ipmi_pef_print_str("Sensor number", "Any");
+		else
+			ipmi_pef_print_dec("Sensor number", pef->entry.sensor_number);
+
+		ipmi_pef_print_event_info(pef, buf);
+		ipmi_pef_print_str("Action",
+					ipmi_pef_bit_desc(&pef_b2s_actions, pef->entry.action));
+
+		if (pef->entry.action & PEF_ACTION_ALERT) {
+			set = (pef->entry.policy_number & PEF_POLICY_NUMBER_MASK);
+			ipmi_pef_print_int("Policy set", set);
+		}
+	}
+}
+
+static void
+ipmi_pef_list_entries(struct ipmi_intf * intf)
+{	/*
+	// list all PEF table entries
+	*/
+	struct ipmi_rs * rsp;
+	struct ipmi_rq req;
+	struct pef_cfgparm_selector psel;
+	struct pef_cfgparm_filter_table_entry * pcfg;
+	uint32_t i;
+	uint8_t max_filters;
+
+	memset(&req, 0, sizeof(req));
+	req.msg.netfn = IPMI_NETFN_SE;
+	req.msg.cmd = IPMI_CMD_GET_PEF_CAPABILITIES;
+	rsp = ipmi_pef_msg_exchange(intf, &req, "PEF capabilities");
+	if (!rsp
+	|| (max_filters = ((struct pef_capabilities *)rsp->data)->tblsize) == 0)
+		return;	/* sssh, not supported */
+
+	memset(&psel, 0, sizeof(psel));
+	psel.id = PEF_CFGPARM_ID_PEF_FILTER_TABLE_ENTRY;
+	memset(&req, 0, sizeof(req));
+	req.msg.netfn = IPMI_NETFN_SE;
+	req.msg.cmd = IPMI_CMD_GET_PEF_CONFIG_PARMS;
+	req.msg.data = (uint8_t *)&psel;
+	req.msg.data_len = sizeof(psel);
+	for (i=1; i<=max_filters; i++) {
+		if (i > 1)
+			printf("\n");
+		psel.set = (i & PEF_FILTER_TABLE_ID_MASK);
+		rsp = ipmi_pef_msg_exchange(intf, &req, "PEF table entry");
+		if (!rsp
+		|| (psel.set != (rsp->data[1] & PEF_FILTER_TABLE_ID_MASK))) {
+			lprintf(LOG_ERR, " **Error retrieving %s",
+				"PEF table entry");
+			continue;
+		}
+		pcfg = (struct pef_cfgparm_filter_table_entry *)&rsp->data[1];
+		first_field = 1;
+		ipmi_pef_print_entry(rsp, psel.set, pcfg);
+	}
+}
+
+static void
+ipmi_pef_list_policies(struct ipmi_intf * intf)
+{	/*
+	// list PEF alert policies
+	*/
+	struct ipmi_rs * rsp;
+	struct ipmi_rq req;
+	struct pef_cfgparm_policy_table_entry * ptbl, * ptmp;
+	uint32_t i;
+	uint8_t wrk, ch, medium, tbl_size;
+
+	tbl_size = ipmi_pef_get_policy_table(intf, &ptbl);
+	if (!tbl_size)
+		return;
+	memset(&req, 0, sizeof(req));
+	req.msg.netfn = IPMI_NETFN_APP;
+	req.msg.cmd = IPMI_CMD_GET_CHANNEL_INFO;
+	req.msg.data = &ch;
+	req.msg.data_len = sizeof(ch);
+	for (ptmp=ptbl, i=1; i<=tbl_size; i++, ptmp++) {
+		if ((ptmp->entry.policy & PEF_POLICY_ENABLED) == PEF_POLICY_ENABLED) {
+			if (i > 1)
+				printf("\n");
+			first_field = 1;
+			ipmi_pef_print_dec("Alert policy table entry",
+						(ptmp->data1 & PEF_POLICY_TABLE_ID_MASK));
+			ipmi_pef_print_dec("Policy set",
+						(ptmp->entry.policy & PEF_POLICY_ID_MASK) >> PEF_POLICY_ID_SHIFT);
+			ipmi_pef_print_str("Policy entry rule",
+						ipmi_pef_bit_desc(&pef_b2s_policies, (ptmp->entry.policy & PEF_POLICY_FLAGS_MASK)));
+
+			if (ptmp->entry.alert_string_key & PEF_POLICY_EVENT_SPECIFIC) {
+				ipmi_pef_print_str("Event-specific", "true");
+//				continue;
+			}			
+			wrk = ptmp->entry.chan_dest;
+
+			/* channel/description */
+			ch = (wrk & PEF_POLICY_CHANNEL_MASK) >> PEF_POLICY_CHANNEL_SHIFT;
+			rsp = ipmi_pef_msg_exchange(intf, &req, "Channel info");
+			if (!rsp || rsp->data[0] != ch) {
+				lprintf(LOG_ERR, " **Error retrieving %s",
+					"Channel info");
+				continue;
+			}
+			medium = rsp->data[1];
+			ipmi_pef_print_dec("Channel number", ch);
+			ipmi_pef_print_str("Channel medium",
+						ipmi_pef_bit_desc(&pef_b2s_ch_medium, medium));
+
+			/* destination/description */
+			wrk &= PEF_POLICY_DESTINATION_MASK;
+			switch (medium) {
+				case PEF_CH_MEDIUM_TYPE_LAN:
+					ipmi_pef_print_lan_dest(intf, ch, wrk);
+					break;
+				case PEF_CH_MEDIUM_TYPE_SERIAL:
+					ipmi_pef_print_serial_dest(intf, ch, wrk);
+					break;
+				default:
+					ipmi_pef_print_dest(intf, ch, wrk);
+					break;
+			}
+		}
+	}
+	free(ptbl);
+}
+
+static void
+ipmi_pef_get_status(struct ipmi_intf * intf)
+{	/*
+	// report the PEF status
+	*/
+	struct ipmi_rs * rsp;
+	struct ipmi_rq req;
+	struct pef_cfgparm_selector psel;
+	char tbuf[40];
+	time_t ts;
+
+	memset(&req, 0, sizeof(req));
+	req.msg.netfn = IPMI_NETFN_SE;
+	req.msg.cmd = IPMI_CMD_GET_LAST_PROCESSED_EVT_ID;
+	rsp = ipmi_pef_msg_exchange(intf, &req, "Last S/W processed ID");
+	if (!rsp) {
+		lprintf(LOG_ERR, " **Error retrieving %s",
+			"Last S/W processed ID");
+		return;
+	}
+#if WORDS_BIGENDIAN
+	ts = (time_t)(rsp->data[0]<<24 + rsp->data[1]<<16 + rsp->data[2]<<8 + rsp->data[3]);
+#else
+	ts = (time_t)(*(long *)rsp->data);
+#endif
+	strftime(tbuf, sizeof(tbuf), "%m/%d/%Y %H:%M:%S", localtime(&ts));
+
+	ipmi_pef_print_str("Last SEL addition", tbuf);
+	ipmi_pef_print_2xd("Last SEL record ID", rsp->data[5], rsp->data[4]);
+	ipmi_pef_print_2xd("Last S/W processed ID", rsp->data[7], rsp->data[6]);
+	ipmi_pef_print_2xd("Last BMC processed ID", rsp->data[9], rsp->data[8]);
+
+	memset(&psel, 0, sizeof(psel));
+	psel.id = PEF_CFGPARM_ID_PEF_CONTROL;
+	memset(&req, 0, sizeof(req));
+	req.msg.netfn = IPMI_NETFN_SE;
+	req.msg.cmd = IPMI_CMD_GET_PEF_CONFIG_PARMS;
+	req.msg.data = (uint8_t *)&psel;
+	req.msg.data_len = sizeof(psel);
+	rsp = ipmi_pef_msg_exchange(intf, &req, "PEF control");
+	if (!rsp) {
+		lprintf(LOG_ERR, " **Error retrieving %s",
+			"PEF control");
+		return;
+	}
+	ipmi_pef_print_flags(&pef_b2s_control, P_ABLE, rsp->data[1]);
+
+	psel.id = PEF_CFGPARM_ID_PEF_ACTION;
+	rsp = ipmi_pef_msg_exchange(intf, &req, "PEF action");
+	if (!rsp) {
+		lprintf(LOG_ERR, " **Error retrieving %s",
+			"PEF action");
+		return;
+	}
+	ipmi_pef_print_flags(&pef_b2s_actions, P_ACTV, rsp->data[1]);
+}
+
+static void
+ipmi_pef_get_info(struct ipmi_intf * intf)
+{	/*
+	// report PEF capabilities + System GUID
+	*/
+	struct ipmi_rs * rsp;
+	struct ipmi_rq req;
+	struct pef_capabilities * pcap;
+	struct pef_cfgparm_selector psel;
+	struct pef_cfgparm_policy_table_entry * ptbl;
+	uint8_t * uid;
+	uint8_t actions, tbl_size;
+
+	if ((tbl_size = ipmi_pef_get_policy_table(intf, &ptbl)) > 0)
+		free(ptbl);
+
+	memset(&req, 0, sizeof(req));
+	req.msg.netfn = IPMI_NETFN_SE;
+	req.msg.cmd = IPMI_CMD_GET_PEF_CAPABILITIES;
+	rsp = ipmi_pef_msg_exchange(intf, &req, "PEF capabilities");
+	if (!rsp)
+		return;
+	pcap = (struct pef_capabilities *)rsp->data;
+	ipmi_pef_print_1xd("Version", pcap->version);
+	ipmi_pef_print_dec("PEF table size", pcap->tblsize);
+	ipmi_pef_print_dec("Alert policy table size", tbl_size);
+	actions = pcap->actions;
+
+	memset(&psel, 0, sizeof(psel));
+	psel.id = PEF_CFGPARM_ID_SYSTEM_GUID;
+	memset(&req, 0, sizeof(req));
+	req.msg.netfn = IPMI_NETFN_SE;
+	req.msg.cmd = IPMI_CMD_GET_PEF_CONFIG_PARMS;
+	req.msg.data = (uint8_t *)&psel;
+	req.msg.data_len = sizeof(psel);
+	rsp = ipmi_pef_msg_exchange(intf, &req, "System GUID");
+	uid = NULL;
+	if (rsp && (rsp->data[1] & PEF_SYSTEM_GUID_USED_IN_PET))
+		uid = &rsp->data[2];
+	else {
+		memset(&req, 0, sizeof(req));
+		req.msg.netfn = IPMI_NETFN_APP;
+		req.msg.cmd = IPMI_CMD_GET_SYSTEM_GUID;
+		rsp = ipmi_pef_msg_exchange(intf, &req, "System GUID");
+		if (rsp)
+			uid = &rsp->data[0];
+	}
+	if (uid) {		/* got GUID? */
+		if (verbose)
+			printf(pef_fld_fmts[F_UID][0], KYWD_LENGTH, "System GUID",
+					uid[0], uid[1], uid[2], uid[3], uid[4], uid[5], uid[6], uid[7],
+					uid[8], uid[9], uid[10],uid[11],uid[12],uid[13],uid[14],uid[15]);
+		else
+			printf(pef_fld_fmts[F_UID][1],
+					uid[0], uid[1], uid[2], uid[3], uid[4], uid[5], uid[6], uid[7],
+					uid[8], uid[9], uid[10],uid[11],uid[12],uid[13],uid[14],uid[15]);
+	}
+	ipmi_pef_print_flags(&pef_b2s_actions, P_SUPP, actions);
+}
+
+int ipmi_pef_main(struct ipmi_intf * intf, int argc, char ** argv)
+{	/*
+	// PEF subcommand handling
+	*/
+	int help = 0;
+
+	if (!argc || !strncmp(argv[0], "info", 4))
+		ipmi_pef_get_info(intf);
+	else if (!strncmp(argv[0], "help", 4))
+		help = 1;
+	else if (!strncmp(argv[0], "status", 6))
+		ipmi_pef_get_status(intf);
+	else if (!strncmp(argv[0], "policy", 6))
+		ipmi_pef_list_policies(intf);
+	else if (!strncmp(argv[0], "list", 4))
+		ipmi_pef_list_entries(intf);
+	else {
+		help = 1;
+		lprintf(LOG_ERR, "Invalid PEF command: '%s'\n", argv[0]);
+	}
+	if (help)
+		lprintf(LOG_NOTICE, "PEF commands: info status policy list");
+	else if (!verbose)
+		printf("\n");
+	return 0;
+}

ipmitool/lib/ipmi_picmg.c

@@ -0,0 +1,747 @@
+
+/*
+	(C) Kontron
+
+*/
+
+#include <ipmitool/ipmi_intf.h>
+#include <ipmitool/ipmi_picmg.h>
+#include <ipmitool/ipmi_fru.h>		/* for access to link descriptor defines */
+
+
+void
+ipmi_picmg_help (void)
+{
+	printf(" properties     - get PICMG properties\n");
+	printf(" addrinfo       - get address information\n");
+	printf(" activate       - activate a FRU\n");
+	printf(" deactivate     - deactivate a FRU\n");
+	printf(" policy get     - get the FRU activation policy\n");
+	printf(" policy set     - set the FRU activation policy\n");
+	printf(" portstate get  - get port state \n");
+	printf(" portstate set  - set port state \n");
+	printf(" led prop       - get led properties\n");
+	printf(" led cap        - get led color capabilities\n");
+	printf(" led state get  - get led state\n");
+	printf(" led state set  - set led state\n");
+	printf(" power get      - get power level info\n");
+	printf(" power set      - set power level\n");
+}
+
+int
+ipmi_picmg_getaddr(struct ipmi_intf * intf)
+{
+	struct ipmi_rs * rsp;
+	struct ipmi_rq req;
+	unsigned char msg_data;
+
+	memset(&req, 0, sizeof(req));
+	req.msg.netfn = IPMI_NETFN_PICMG;
+	req.msg.cmd = PICMG_GET_ADDRESS_INFO_CMD;
+	req.msg.data = &msg_data;
+	req.msg.data_len = 1;
+	msg_data = 0;
+
+	rsp = intf->sendrecv(intf, &req);
+	if (!rsp  || rsp->ccode) {
+		printf("Error getting address information\n");
+		return -1;
+	}
+
+	printf("Hardware Address : 0x%02x\n", rsp->data[1]);
+	printf("IPMB-0 Address   : 0x%02x\n", rsp->data[2]);
+	printf("FRU ID           : 0x%02x\n", rsp->data[4]);
+	printf("Site ID          : 0x%02x\n", rsp->data[5]);
+
+	printf("Site Type        : ");
+	switch (rsp->data[6]) {
+	case PICMG_ATCA_BOARD:
+		printf("ATCA board\n");
+		break;
+	case PICMG_POWER_ENTRY:
+		printf("Power Entry Module\n");
+		break;
+	case PICMG_SHELF_FRU:
+		printf("Shelf FRU\n");
+		break;
+	case PICMG_DEDICATED_SHMC:
+		printf("Dedicated Shelf Manager\n");
+		break;
+	case PICMG_FAN_TRAY:
+		printf("Fan Tray\n");
+		break;
+	case PICMG_FAN_FILTER_TRAY:
+		printf("Fan Filter Tray\n");
+		break;
+	case PICMG_ALARM:
+		printf("Alarm module\n");
+		break;
+	case PICMG_AMC:
+		printf("AMC\n");
+		break;
+	case PICMG_PMC:
+	 	printf("PMC\n");
+	 	break;
+	 case PICMG_RTM:
+	 	printf("RTM\n");
+		break;
+	default:
+		if (rsp->data[6] >= 0xc0 && rsp->data[6] <= 0xcf) {
+			printf("OEM\n");
+		} else {
+			printf("unknown\n");
+		}
+	}
+
+	return 0;
+}
+
+int
+ipmi_picmg_properties(struct ipmi_intf * intf)
+{
+	struct ipmi_rs * rsp;
+	struct ipmi_rq req;
+	unsigned char msg_data;
+
+	memset(&req, 0, sizeof(req));
+	req.msg.netfn    = IPMI_NETFN_PICMG;
+	req.msg.cmd      = PICMG_GET_PICMG_PROPERTIES_CMD;
+	req.msg.data     = &msg_data;
+	req.msg.data_len = 1;
+	msg_data = 0;
+
+	rsp = intf->sendrecv(intf, &req);
+	if (!rsp  || rsp->ccode) {
+		printf("Error getting address information\n");
+		return -1;
+	}
+
+	printf("PICMG identifier   : 0x%02x\n", rsp->data[0]);
+	printf("PICMG Ext. Version : %i.%i\n",  rsp->data[1]&0x0f, (rsp->data[1]&0xf0) >> 4);
+	printf("Max FRU Device ID  : 0x%02x\n", rsp->data[2]);
+	printf("FRU Device ID      : 0x%02x\n", rsp->data[3]);
+
+	return 0;
+}
+
+
+
+#define PICMG_FRU_DEACTIVATE	(unsigned char) 0x00
+#define PICMG_FRU_ACTIVATE    	(unsigned char) 0x01
+
+int
+ipmi_picmg_fru_activation(struct ipmi_intf * intf, int argc, char ** argv, unsigned char state)
+{
+	struct ipmi_rs * rsp;
+	struct ipmi_rq req;
+
+	struct picmg_set_fru_activation_cmd cmd;
+
+	memset(&req, 0, sizeof(req));
+	req.msg.netfn    = IPMI_NETFN_PICMG;
+	req.msg.cmd      = PICMG_FRU_ACTIVATION_CMD;
+	req.msg.data     = (unsigned char*) &cmd;
+	req.msg.data_len = 3;
+
+	cmd.picmg_id  = 0;								/* PICMG identifier */
+	cmd.fru_id    = (unsigned char) atoi(argv[0]);	/* FRU ID 			*/
+	cmd.fru_state = state;
+
+	rsp = intf->sendrecv(intf, &req);
+
+	if (!rsp  || rsp->ccode) {
+		printf("Error activation/deactivation of FRU\n");
+		return -1;
+	}
+	if (rsp->data[0] != 0x00) {
+		printf("Error\n");
+	}
+
+	return 0;
+}
+
+
+int
+ipmi_picmg_fru_activation_policy_get(struct ipmi_intf * intf, int argc, char ** argv)
+{
+	struct ipmi_rs * rsp;
+	struct ipmi_rq req;
+
+	unsigned char msg_data[4];
+
+	memset(&req, 0, sizeof(req));
+	req.msg.netfn    = IPMI_NETFN_PICMG;
+	req.msg.cmd      = PICMG_GET_FRU_POLICY_CMD;
+	req.msg.data     = msg_data;
+	req.msg.data_len = 2;
+
+	msg_data[0] = 0;								/* PICMG identifier */
+	msg_data[1] = (unsigned char) atoi(argv[0]);	/* FRU ID 			*/
+
+
+	rsp = intf->sendrecv(intf, &req);
+
+	if (!rsp) {
+		printf("no response\n");
+		return -1;
+	}
+
+	if (rsp->ccode) {
+		printf("returned CC code 0x%02x\n", rsp->ccode);
+		return -1;
+	}
+
+	printf("Activation Policy for FRU %x: ", atoi(argv[0]) );
+	printf(" %s\n",(((*(rsp->data+3))&0x01) == 0x01)?"is locked":"is not locked");
+
+	return 0;
+}
+
+int
+ipmi_picmg_portstate_get(struct ipmi_intf * intf, int argc, char ** argv)
+{
+	struct ipmi_rs * rsp;
+	struct ipmi_rq req;
+
+	unsigned char msg_data[4];
+
+	struct fru_picmgext_link_desc* d; /* descriptor pointer for rec. data */
+
+	memset(&req, 0, sizeof(req));
+
+	req.msg.netfn    = IPMI_NETFN_PICMG;
+	req.msg.cmd      = PICMG_GET_PORT_STATE_CMD;
+	req.msg.data     = msg_data;
+	req.msg.data_len = 2;
+
+	msg_data[0] = 0x00;						/* PICMG identifier */
+	msg_data[1] = (atoi(argv[0]) & 0x3)<<6;	/* interface      */
+	msg_data[1] |= (atoi(argv[1]) & 0x3F);	/* channel number */
+
+	rsp = intf->sendrecv(intf, &req);
+
+	if (!rsp) {
+		printf("no response\n");
+		return -1;
+	}
+
+	if (rsp->ccode) {
+		printf("returned CC code 0x%02x\n", rsp->ccode);
+		return -1;
+	}
+
+	if (rsp->data_len == 6) {
+		d = (struct fru_picmgext_link_desc *) &(rsp->data[1]);
+
+		printf("      Link Grouping ID:     0x%02x\n", d->grouping);
+		printf("      Link Type Extension:  0x%02x\n", d->ext);
+		printf("      Link Type:            ");
+		if (d->type == 0 || d->type == 0xff)
+		{
+			printf("Reserved\n");
+		}
+		else if (d->type >= 0x06 && d->type <= 0xef)
+		{
+			printf("Reserved\n");
+		}
+		else if (d->type >= 0xf0 && d->type <= 0xfe)
+		{
+			printf("OEM GUID Definition\n");
+		}
+		else
+		{
+			switch (d->type)
+			{
+				case FRU_PICMGEXT_LINK_TYPE_BASE:
+					printf("PICMG 3.0 Base Interface 10/100/1000\n");
+					break;
+				case FRU_PICMGEXT_LINK_TYPE_FABRIC_ETHERNET:
+					printf("PICMG 3.1 Ethernet Fabric Interface\n");
+					break;
+				case FRU_PICMGEXT_LINK_TYPE_FABRIC_INFINIBAND:
+					printf("PICMG 3.2 Infiniband Fabric Interface\n");
+					break;
+				case FRU_PICMGEXT_LINK_TYPE_FABRIC_STAR:
+					printf("PICMG 3.3 Star Fabric Interface\n");
+					break;
+				case  FRU_PICMGEXT_LINK_TYPE_PCIE:
+					printf("PCI Express Fabric Interface\n");
+				default:
+					printf("Invalid\n");
+			}
+		}
+		printf("      Link Designator:      0x%03x\n", d->designator);
+		printf("        Port Flag:            0x%02x\n", d->designator >> 8);
+		printf("        Interface:            ");
+			switch ((d->designator & 0xff) >> 6)
+			{
+				case FRU_PICMGEXT_DESIGN_IF_BASE:
+					printf("Base Interface\n");
+					break;
+				case FRU_PICMGEXT_DESIGN_IF_FABRIC:
+					printf("Fabric Interface\n");
+					break;
+				case FRU_PICMGEXT_DESIGN_IF_UPDATE_CHANNEL:
+					printf("Update Channel\n");
+					break;
+				case FRU_PICMGEXT_DESIGN_IF_RESERVED:
+					printf("Reserved\n");
+				default:
+					printf("Invalid");
+			}
+		printf("        Channel Number:       0x%02x\n", d->designator & 0x1f);
+		printf("\n");
+		printf("        STATE: %s\n", rsp->data[5] == 0x01?"enabled":"disabled");
+	}
+
+
+	return 0;
+}
+
+int
+ipmi_picmg_portstate_set(struct ipmi_intf * intf, int argc, char ** argv)
+{
+	struct ipmi_rs * rsp;
+	struct ipmi_rq req;
+
+	unsigned char msg_data[6];
+	struct fru_picmgext_link_desc* d;
+
+	memset(&req, 0, sizeof(req));
+
+	req.msg.netfn    = IPMI_NETFN_PICMG;
+	req.msg.cmd      = PICMG_SET_PORT_STATE_CMD;
+	req.msg.data     = msg_data;
+	req.msg.data_len = 6;
+
+	msg_data[0] = 0x00;	        						/* PICMG identifier */
+
+	d = (struct fru_picmgext_link_desc*) &(msg_data[1]);
+
+	d->designator = (unsigned char) (atoi(argv[0]) & 0x1F);        /* channel   */
+	d->designator = (unsigned char) ((atoi(argv[1]) & 0x03) << 6); /* interface */
+	d->designator = (unsigned char) ((atoi(argv[2]) & 0x03) << 8); /* port      */
+
+	d->type       = (unsigned char) (atoi(argv[3]) & 0xFF);       /* link type */
+	d->ext        = (unsigned char) (atoi(argv[4]) & 0x03);       /* type ext  */
+	d->grouping   = (unsigned char) (atoi(argv[5]) & 0xFF);       /* type ext  */
+
+	msg_data[5]   = (unsigned char) (atoi(argv[6]) & 0x01);       /* en/dis */
+
+	rsp = intf->sendrecv(intf, &req);
+
+	if (!rsp) {
+		printf("no response\n");
+		return -1;
+	}
+
+	if (rsp->ccode) {
+		printf("returned CC code 0x%02x\n", rsp->ccode);
+		return -1;
+	}
+
+	return 0;
+}
+
+int
+ipmi_picmg_get_led_properties(struct ipmi_intf * intf, int argc, char ** argv)
+{
+	struct ipmi_rs * rsp;
+	struct ipmi_rq req;
+	
+	unsigned char msg_data[6];
+	
+	memset(&req, 0, sizeof(req));
+
+	req.msg.netfn = IPMI_NETFN_PICMG;
+	req.msg.cmd   = PICMG_GET_FRU_LED_PROPERTIES_CMD;
+	req.msg.data  = msg_data;
+	req.msg.data_len = 2;
+	
+	msg_data[0] = 0x00;	        						/* PICMG identifier */
+	msg_data[1] = atoi(argv[0]);						/* FRU-ID */
+	
+	rsp = intf->sendrecv(intf, &req);
+	
+	if (!rsp) {
+		printf("no response\n");
+		return -1;
+	}
+
+	if (rsp->ccode) {
+		printf("returned CC code 0x%02x\n", rsp->ccode);
+		return -1;
+	}
+	
+	printf("General Status LED Properties:  0x%2x\n\r", rsp->data[1] );	
+	printf("App. Specific  LED Count:       0x%2x\n\r", rsp->data[2] );	
+	
+	return 0;
+}
+
+int
+ipmi_picmg_get_led_capabilities(struct ipmi_intf * intf, int argc, char ** argv)
+{
+	int i;
+	struct ipmi_rs * rsp;
+	struct ipmi_rq req;
+	
+	unsigned char msg_data[6];
+	
+	memset(&req, 0, sizeof(req));
+
+	req.msg.netfn = IPMI_NETFN_PICMG;
+	req.msg.cmd   = PICMG_GET_LED_COLOR_CAPABILITIES_CMD;
+	req.msg.data  = msg_data;
+	req.msg.data_len = 3;
+	
+	msg_data[0] = 0x00;	        						/* PICMG identifier */
+	msg_data[1] = atoi(argv[0]);						/* FRU-ID */
+	msg_data[2] = atoi(argv[1]);						/* LED-ID */
+	
+	
+	rsp = intf->sendrecv(intf, &req);
+	
+	if (!rsp) {
+		printf("no response\n");
+		return -1;
+	}
+
+	if (rsp->ccode) {
+		printf("returned CC code 0x%02x\n", rsp->ccode);
+		return -1;
+	}
+	
+	printf("LED Color Capabilities: ");	
+	for ( i=0 ; i<8 ; i++ ) {
+		if ( rsp->data[1] & (0x01 << i) ) {
+			printf("%s, ", led_color_str[ i ]);
+		}
+	}
+	printf("\n\r");
+	
+	printf("Default LED Color in\n\r");
+	printf("      LOCAL control:  %s\n\r", led_color_str[ rsp->data[2] ] );	
+	printf("      OVERRIDE state: %s\n\r", led_color_str[ rsp->data[3] ] );
+	
+	return 0;
+}
+
+int
+ipmi_picmg_get_led_state(struct ipmi_intf * intf, int argc, char ** argv)
+{
+	struct ipmi_rs * rsp;
+	struct ipmi_rq req;
+	
+	unsigned char msg_data[6];
+	
+	memset(&req, 0, sizeof(req));
+
+	req.msg.netfn = IPMI_NETFN_PICMG;
+	req.msg.cmd   = PICMG_GET_FRU_LED_STATE_CMD;
+	req.msg.data  = msg_data;
+	req.msg.data_len = 3;
+	
+	msg_data[0] = 0x00;	        						/* PICMG identifier */
+	msg_data[1] = atoi(argv[0]);						/* FRU-ID */
+	msg_data[2] = atoi(argv[1]);						/* LED-ID */
+	
+	
+	rsp = intf->sendrecv(intf, &req);
+	
+	if (!rsp) {
+		printf("no response\n");
+		return -1;
+	}
+
+	if (rsp->ccode) {
+		printf("returned CC code 0x%02x\n", rsp->ccode);
+		return -1;
+	}
+	
+	printf("LED states:                   %x\n\r", rsp->data[1] );
+	printf("  Local Control function:     %x\n\r", rsp->data[2] );
+	printf("  Local Control On-Duration:  %x\n\r", rsp->data[3] );
+	printf("  Local Control Color:        %s\n\r", led_color_str[ rsp->data[4] ]);
+	
+	/* override state or lamp test */
+	if (rsp->data[1] == 0x01) {
+		printf("  Override function:     %x\n\r", rsp->data[5] );
+		printf("  Override On-Duration:  %x\n\r", rsp->data[6] );
+		printf("  Override Color:        %s\n\r", led_color_str[ rsp->data[7] ]);
+		
+	}else if (rsp->data[1] == 0x03) {
+		printf("  Override function:     %x\n\r", rsp->data[5] );
+		printf("  Override On-Duration:  %x\n\r", rsp->data[6] );
+		printf("  Override Color:        %s\n\r", led_color_str[ rsp->data[7] ]);
+		printf("  Lamp test duration:    %x\n\r", rsp->data[8] );
+	}
+	
+	return 0;
+}
+
+int
+ipmi_picmg_set_led_state(struct ipmi_intf * intf, int argc, char ** argv)
+{
+	struct ipmi_rs * rsp;
+	struct ipmi_rq req;
+	
+	unsigned char msg_data[6];
+	
+	memset(&req, 0, sizeof(req));
+
+	req.msg.netfn = IPMI_NETFN_PICMG;
+	req.msg.cmd   = PICMG_SET_FRU_LED_STATE_CMD;
+	req.msg.data  = msg_data;
+	req.msg.data_len = 6;
+	
+	msg_data[0] = 0x00;	        						/* PICMG identifier */
+	msg_data[1] = atoi(argv[0]);						/* FRU-ID           */
+	msg_data[2] = atoi(argv[1]);						/* LED-ID           */
+	msg_data[3] = atoi(argv[2]);						/* LED function     */
+	msg_data[4] = atoi(argv[3]);						/* LED on duration  */
+	msg_data[5] = atoi(argv[4]);						/* LED color        */
+	
+	rsp = intf->sendrecv(intf, &req);
+	
+	if (!rsp) {
+		printf("no response\n");
+		return -1;
+	}
+
+	if (rsp->ccode) {
+		printf("returned CC code 0x%02x\n", rsp->ccode);
+		return -1;
+	}
+	
+		
+	return 0;
+}
+
+int
+ipmi_picmg_get_power_level(struct ipmi_intf * intf, int argc, char ** argv)
+{
+	int i;
+	struct ipmi_rs * rsp;
+	struct ipmi_rq req;
+	
+	unsigned char msg_data[6];
+	
+	memset(&req, 0, sizeof(req));
+
+	req.msg.netfn = IPMI_NETFN_PICMG;
+	req.msg.cmd   = PICMG_GET_POWER_LEVEL_CMD;
+	req.msg.data  = msg_data;
+	req.msg.data_len = 3;
+	
+	msg_data[0] = 0x00;	        						/* PICMG identifier */
+	msg_data[1] = atoi(argv[0]);						/* FRU-ID           */
+	msg_data[2] = atoi(argv[1]);						/* Power type       */
+	
+	
+	rsp = intf->sendrecv(intf, &req);
+	
+	if (!rsp) {
+		printf("no response\n");
+		return -1;
+	}
+
+	if (rsp->ccode) {
+		printf("returned CC code 0x%02x\n", rsp->ccode);
+		return -1;
+	}
+	
+	printf("Dynamic Power Configuration: %s\n", (rsp->data[1]&0x80)==0x80?"enabled":"disabled" );
+	printf("Actual Power Level:          %i\n", (rsp->data[1] & 0xf));
+	printf("Delay to stable Power:       %i\n", rsp->data[2]);
+	printf("Power Multiplier:            %i\n", rsp->data[3]);
+	
+	
+	for ( i = 1; i+3 < rsp->data_len ; i++ ) {
+		printf("   Power Draw %i:            %i\n", i, rsp->data[i+3]);
+	}
+	return 0;
+}
+
+int
+ipmi_picmg_main (struct ipmi_intf * intf, int argc, char ** argv)
+{
+	int rc = 0;
+
+	if (argc == 0 || (!strncmp(argv[0], "help", 4))) {
+		ipmi_picmg_help();
+		return 0;
+	}
+
+	/* address info command */
+	else if (!strncmp(argv[0], "addrinfo", 8)) {
+		rc = ipmi_picmg_getaddr(intf);
+	}
+	
+	/* picmg properties command */
+	else if (!strncmp(argv[0], "properties", 10)) {
+		rc = ipmi_picmg_properties(intf);
+	}
+
+	/* fru activation command */
+	else if (!strncmp(argv[0], "activate", 8)) {
+		if (argc > 1) {
+			rc = ipmi_picmg_fru_activation(intf, argc-1, &(argv[1]), PICMG_FRU_ACTIVATE);
+		}
+		else {
+			printf("specify the FRU to activate\n");
+			return -1;
+		}
+	}
+
+	/* fru deactivation command */
+	else if (!strncmp(argv[0], "deactivate", 10)) {
+		if (argc > 1) {
+			rc = ipmi_picmg_fru_activation(intf, argc-1, &(argv[1]), PICMG_FRU_DEACTIVATE);
+		}else {
+			printf("specify the FRU to deactivate\n");
+			return -1;
+		}
+	}
+
+	/* activation policy command */
+	else if (!strncmp(argv[0], "policy", 6)) {
+		if (argc > 2) {
+			if (!strncmp(argv[1], "get", 3)) {
+				rc = ipmi_picmg_fru_activation_policy_get(intf, argc-1, &(argv[2]));
+			}
+			else if (!strncmp(argv[1], "set", 6)) {
+				printf("tbd\n");
+				return -1;
+			}
+			else {
+				printf("specify fru\n");
+				return -1;
+			}
+		}else {
+			printf("wrong parameters\n");
+			return -1;
+		}
+	}
+
+	/* portstate command */
+	else if (!strncmp(argv[0], "portstate", 9)) {
+		if (argc > 2) {
+			if (!strncmp(argv[1], "get", 3)) {
+				rc = ipmi_picmg_portstate_get(intf, argc-1, &(argv[2]));
+			}
+
+			else {
+				printf("portstate get <intf><chn>\n");
+			}
+		}
+
+		else if (!strncmp(argv[1], "set", 3)) {
+			if (argc > 5) {
+				rc = ipmi_picmg_portstate_set(intf, argc-1, &(argv[2]));
+			}
+			else {
+				printf("portstate set <chn><intf><port><type><typeext><group><en|dis>\n");
+				return -1;
+			}
+		}
+		else {
+			printf("<set>|<get>\n");
+			return -1;
+		}
+	}
+	
+	/* ATCA led commands */
+	else if (!strncmp(argv[0], "led", 3)) {
+		if (argc > 1) {
+			if (!strncmp(argv[1], "prop", 4)) {
+				if (argc > 2) {
+					rc = ipmi_picmg_get_led_properties(intf, argc-1, &(argv[2]));	
+				}
+				else {
+					printf("led prop <FRU-ID>\n");
+				}
+			}
+			else if (!strncmp(argv[1], "cap", 3)) {
+				if (argc > 3) {
+					rc = ipmi_picmg_get_led_capabilities(intf, argc-1, &(argv[2]));	
+				}
+				else {
+					printf("led cap <FRU-ID> <LED-ID>\n");
+				}
+			}
+			else if (!strncmp(argv[1], "get", 3)) {
+				if (argc > 3) {
+					rc = ipmi_picmg_get_led_state(intf, argc-1, &(argv[2]));	
+				}
+				else {
+					printf("led get <FRU-ID> <LED-ID>\n");
+				}
+			}
+			else if (!strncmp(argv[1], "set", 3)) {
+				if (argc > 6) {
+					rc = ipmi_picmg_set_led_state(intf, argc-1, &(argv[2]));	
+				}
+				else {
+					printf("led set <FRU-ID> <LED-ID> <function> <duration> <color>\n");
+					printf("   <FRU-ID>\n");
+					printf("   <LED-ID>\n"); 
+					printf("   <function>  0:       LED OFF override\n");
+					printf("               1 - 250: LED blinking override (off duration)\n");
+					printf("               251:     LED Lamp Test\n");
+					printf("               252:     LED restore to local control\n");
+					printf("               255:     LED ON override\n");
+					printf("   <duration>  1 - 127: LED Lamp Test / on duration\n");
+					printf("   <color>     \n");
+				}
+			}
+			else {
+				printf("prop | cap | get | set\n");
+			}
+		}
+	}
+	/* power commands */
+	else if (!strncmp(argv[0], "power", 5)) {
+		if (argc > 1) {
+			if (!strncmp(argv[1], "get", 3)) {
+				if (argc > 3) {
+					rc = ipmi_picmg_get_power_level(intf, argc-1, &(argv[2]));
+				}
+				else {
+					printf("power get <FRI-ID> <type>\n");
+					printf("   <type>   0 : steady state powert draw levels\n");
+					printf("            1 : desired steady state draw levels\n");
+					printf("            2 : early power draw levels\n");
+					printf("            3 : desired early levels\n");
+					
+					return -1;
+				}
+			}
+			else if (!strncmp(argv[1], "set", 3)) {
+				if (argc > 5) {
+					printf("not implemented yet\n");
+				}
+				else {
+					return -1;
+				}
+			}
+			else {
+				printf("<set>|<get>\n");
+				return -1;
+			}
+		}
+		else {
+			printf("<set>|<get>\n");  
+			return -1;
+		}
+	}
+
+	else {
+		
+		ipmi_picmg_help();
+		return -1;
+	}
+	
+	return rc;
+
+}

ipmitool/lib/ipmi_raw.c

@@ -0,0 +1,291 @@
+/*
+ * Copyright (c) 2003 Sun Microsystems, Inc.  All Rights Reserved.
+ * 
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 
+ * Redistribution of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 
+ * Redistribution in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * 
+ * Neither the name of Sun Microsystems, Inc. or the names of
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ * 
+ * This software is provided "AS IS," without a warranty of any kind.
+ * ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND WARRANTIES,
+ * INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A
+ * PARTICULAR PURPOSE OR NON-INFRINGEMENT, ARE HEREBY EXCLUDED.
+ * SUN MICROSYSTEMS, INC. ("SUN") AND ITS LICENSORS SHALL NOT BE LIABLE
+ * FOR ANY DAMAGES SUFFERED BY LICENSEE AS A RESULT OF USING, MODIFYING
+ * OR DISTRIBUTING THIS SOFTWARE OR ITS DERIVATIVES.  IN NO EVENT WILL
+ * SUN OR ITS LICENSORS BE LIABLE FOR ANY LOST REVENUE, PROFIT OR DATA,
+ * OR FOR DIRECT, INDIRECT, SPECIAL, CONSEQUENTIAL, INCIDENTAL OR
+ * PUNITIVE DAMAGES, HOWEVER CAUSED AND REGARDLESS OF THE THEORY OF
+ * LIABILITY, ARISING OUT OF THE USE OF OR INABILITY TO USE THIS SOFTWARE,
+ * EVEN IF SUN HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
+ */
+
+#include <string.h>
+#include <stdlib.h>
+#include <stdio.h>
+
+#include <ipmitool/ipmi.h>
+#include <ipmitool/log.h>
+#include <ipmitool/helper.h>
+#include <ipmitool/ipmi_intf.h>
+#include <ipmitool/ipmi_raw.h>
+#include <ipmitool/ipmi_strings.h>
+
+#define IPMI_I2C_MASTER_MAX_SIZE	0x40
+
+/* ipmi_master_write_read  -  Perform I2C write/read transactions
+ *
+ * This function performs an I2C master write-read function through
+ * IPMI interface.  It has a maximum transfer size of 32 bytes.
+ *
+ * @intf:	ipmi interface
+ * @addr:	i2c slave address
+ * @wdata:	data to write
+ * @wsize:	length of data to write (max 64 bytes)
+ * @rsize:	length of data to read (max 64 bytes)
+ *
+ * Returns pointer to IPMI Response
+ */
+struct ipmi_rs *
+ipmi_master_write_read(struct ipmi_intf * intf, uint8_t addr, uint8_t * wdata, uint8_t wsize, uint8_t rsize)
+{
+	struct ipmi_rq req;
+	struct ipmi_rs * rsp;
+	uint8_t rqdata[IPMI_I2C_MASTER_MAX_SIZE + 3];
+
+	if (rsize > IPMI_I2C_MASTER_MAX_SIZE) {
+		lprintf(LOG_ERR, "Master Write-Read: Too many bytes (%d) to read", rsize);
+		return NULL;
+	}
+	if (wsize > IPMI_I2C_MASTER_MAX_SIZE) {
+		lprintf(LOG_ERR, "Master Write-Read: Too many bytes (%d) to write", wsize);
+		return NULL;
+	}
+
+	memset(&req, 0, sizeof(struct ipmi_rq));
+	req.msg.netfn = IPMI_NETFN_APP;
+	req.msg.cmd = 0x52;	/* master write-read */
+	req.msg.data = rqdata;
+	req.msg.data_len = 3;
+
+	memset(rqdata, 0, IPMI_I2C_MASTER_MAX_SIZE + 3);
+	rqdata[0] = 0x00;	/* channel number, bus id, bus type */
+	rqdata[1] = addr;	/* slave address */
+	rqdata[2] = rsize;      /* number of bytes to read */
+
+	if (wsize > 0) {
+		/* copy in data to write */
+		memcpy(rqdata+3, wdata, wsize);
+		req.msg.data_len += wsize;
+		lprintf(LOG_DEBUG, "Writing %d bytes to i2cdev %02Xh", wsize, addr);
+	}
+
+	if (rsize > 0) {
+		lprintf(LOG_DEBUG, "Reading %d bytes from i2cdev %02Xh", rsize, addr);
+	}
+
+	rsp = intf->sendrecv(intf, &req);
+	if (rsp == NULL) {
+		lprintf(LOG_ERR, "I2C Master Write-Read command failed");
+		return NULL;
+	}
+	else if (rsp->ccode > 0) {
+		switch (rsp->ccode) {
+		case 0x81:
+			lprintf(LOG_ERR, "I2C Master Write-Read command failed: Lost Arbitration");
+			break;
+		case 0x82:
+			lprintf(LOG_ERR, "I2C Master Write-Read command failed: Bus Error");
+			break;
+		case 0x83:
+			lprintf(LOG_ERR, "I2C Master Write-Read command failed: NAK on Write");
+			break;
+		case 0x84:
+			lprintf(LOG_ERR, "I2C Master Write-Read command failed: Truncated Read");
+			break;
+		default:
+			lprintf(LOG_ERR, "I2C Master Write-Read command failed: %s",
+				val2str(rsp->ccode, completion_code_vals));
+			break;
+		}
+		return NULL;
+	}
+
+	return rsp;
+}
+
+static void rawi2c_usage(void)
+{
+	lprintf(LOG_NOTICE, "usage: i2c <i2caddr> <read bytes> [write data]");
+}
+
+int
+ipmi_rawi2c_main(struct ipmi_intf * intf, int argc, char ** argv)
+{
+	struct ipmi_rs * rsp;
+	uint8_t wdata[IPMI_I2C_MASTER_MAX_SIZE];
+	uint8_t i2caddr = 0;
+	uint8_t rsize = 0;
+	uint8_t wsize = 0;
+	int i;
+
+	if (argc < 2 || strncmp(argv[0], "help", 4) == 0) {
+		rawi2c_usage();
+		return 0;
+	}
+	else if (argc-2 > IPMI_I2C_MASTER_MAX_SIZE) {
+		lprintf(LOG_ERR, "Raw command input limit (%d bytes) exceeded",
+			IPMI_I2C_MASTER_MAX_SIZE);
+		return -1;
+	}
+
+	i2caddr = (uint8_t)strtoul(argv[0], NULL, 0);
+	rsize = (uint8_t)strtoul(argv[1], NULL, 0);
+
+	if (i2caddr == 0) {
+		lprintf(LOG_ERR, "Invalid I2C address 0");
+		rawi2c_usage();
+		return -1;
+	}
+
+	memset(wdata, 0, IPMI_I2C_MASTER_MAX_SIZE);
+	for (i=2; i<argc; i++) {
+		uint8_t val = (uint8_t)strtol(argv[i], NULL, 0);
+		wdata[i-2] = val;
+		wsize++;
+	}
+
+	lprintf(LOG_INFO, "RAW I2C REQ (i2caddr=%x readbytes=%d writebytes=%d)",
+		i2caddr, rsize, wsize);
+	printbuf(wdata, wsize, "WRITE DATA");
+
+	rsp = ipmi_master_write_read(intf, i2caddr, wdata, wsize, rsize);
+	if (rsp == NULL) {
+		lprintf(LOG_ERR, "Unable to perform I2C Master Write-Read");
+		return -1;
+	}
+
+	if (wsize > 0) {
+		if (verbose || rsize == 0)
+			printf("Wrote %d bytes to I2C device %02Xh\n", wsize, i2caddr);
+	}
+
+	if (rsize > 0) {
+		if (verbose || wsize == 0)
+			printf("Read %d bytes from I2C device %02Xh\n", rsp->data_len, i2caddr);
+
+		/* print the raw response buffer */
+		for (i=0; i<rsp->data_len; i++) {
+			if (((i%16) == 0) && (i != 0))
+				printf("\n");
+			printf(" %2.2x", rsp->data[i]);
+		}
+		printf("\n");
+
+		if (rsp->data_len <= 4) {
+			uint32_t bit;
+			int j;
+			for (i = 0; i < rsp->data_len; i++) {
+				for (j = 1, bit = 0x80; bit > 0; bit /= 2, j++) {
+					printf("%s", (rsp->data[i] & bit) ? "1" : "0");
+				}
+				printf(" ");
+			}
+			printf("\n");
+		}
+	}
+
+	return 0;
+}
+
+int
+ipmi_raw_main(struct ipmi_intf * intf, int argc, char ** argv)
+{
+	struct ipmi_rs * rsp;
+	struct ipmi_rq req;
+	uint8_t netfn, cmd, lun;
+	int i;
+	uint8_t data[256];
+
+	if (argc < 2 || strncmp(argv[0], "help", 4) == 0) {
+		lprintf(LOG_NOTICE, "RAW Commands:  raw <netfn> <cmd> [data]");
+		print_valstr(ipmi_netfn_vals, "Network Function Codes", LOG_NOTICE);
+		lprintf(LOG_NOTICE, "(can also use raw hex values)");
+		return -1;
+	}
+	else if (argc > sizeof(data))
+	{
+		lprintf(LOG_NOTICE, "Raw command input limit (256 bytes) exceeded");
+		return -1;
+	}
+
+	ipmi_intf_session_set_timeout(intf, 15);
+	ipmi_intf_session_set_retry(intf, 1);
+
+	lun = intf->target_lun;
+	netfn = str2val(argv[0], ipmi_netfn_vals);
+	if (netfn == 0xff) {
+		netfn = (uint8_t)strtol(argv[0], NULL, 0);
+	}
+
+	cmd = (uint8_t)strtol(argv[1], NULL, 0);
+
+	memset(data, 0, sizeof(data));
+	memset(&req, 0, sizeof(req));
+	req.msg.netfn = netfn;
+	req.msg.lun = lun;	
+	req.msg.cmd = cmd;
+	req.msg.data = data;
+
+	for (i=2; i<argc; i++) {
+		uint8_t val = (uint8_t)strtol(argv[i], NULL, 0);
+		req.msg.data[i-2] = val;
+		req.msg.data_len++;
+	}
+
+	lprintf(LOG_INFO, 
+           "RAW REQ (channel=0x%x netfn=0x%x lun=0x%x cmd=0x%x data_len=%d)",
+           intf->target_channel & 0x0f, req.msg.netfn,req.msg.lun , 
+           req.msg.cmd, req.msg.data_len);
+
+	printbuf(req.msg.data, req.msg.data_len, "RAW REQUEST");
+
+	rsp = intf->sendrecv(intf, &req);
+
+	if (rsp == NULL) {
+		lprintf(LOG_ERR, "Unable to send RAW command "
+			"(channel=0x%x netfn=0x%x lun=0x%x cmd=0x%x)",
+			intf->target_channel & 0x0f, req.msg.netfn, req.msg.lun, req.msg.cmd);
+		return -1;
+	}
+	if (rsp->ccode > 0) {
+		lprintf(LOG_ERR, "Unable to send RAW command "
+			"(channel=0x%x netfn=0x%x lun=0x%x cmd=0x%x rsp=0x%x): %s",
+			intf->target_channel & 0x0f, req.msg.netfn, req.msg.lun, req.msg.cmd, rsp->ccode,
+			val2str(rsp->ccode, completion_code_vals));
+		return -1;
+	}
+
+	lprintf(LOG_INFO, "RAW RSP (%d bytes)", rsp->data_len);
+
+	/* print the raw response buffer */
+	for (i=0; i<rsp->data_len; i++) {
+		if (((i%16) == 0) && (i != 0))
+			printf("\n");
+		printf(" %2.2x", rsp->data[i]);
+	}
+	printf("\n");
+
+	return 0;
+}
+

ipmitool/lib/ipmi_sensor.c

@@ -0,0 +1,880 @@
+/*
+ * Copyright (c) 2003 Sun Microsystems, Inc.  All Rights Reserved.
+ * 
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 
+ * Redistribution of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 
+ * Redistribution in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * 
+ * Neither the name of Sun Microsystems, Inc. or the names of
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ * 
+ * This software is provided "AS IS," without a warranty of any kind.
+ * ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND WARRANTIES,
+ * INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A
+ * PARTICULAR PURPOSE OR NON-INFRINGEMENT, ARE HEREBY EXCLUDED.
+ * SUN MICROSYSTEMS, INC. ("SUN") AND ITS LICENSORS SHALL NOT BE LIABLE
+ * FOR ANY DAMAGES SUFFERED BY LICENSEE AS A RESULT OF USING, MODIFYING
+ * OR DISTRIBUTING THIS SOFTWARE OR ITS DERIVATIVES.  IN NO EVENT WILL
+ * SUN OR ITS LICENSORS BE LIABLE FOR ANY LOST REVENUE, PROFIT OR DATA,
+ * OR FOR DIRECT, INDIRECT, SPECIAL, CONSEQUENTIAL, INCIDENTAL OR
+ * PUNITIVE DAMAGES, HOWEVER CAUSED AND REGARDLESS OF THE THEORY OF
+ * LIABILITY, ARISING OUT OF THE USE OF OR INABILITY TO USE THIS SOFTWARE,
+ * EVEN IF SUN HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
+ */
+
+#include <string.h>
+#include <math.h>
+
+#include <ipmitool/ipmi.h>
+#include <ipmitool/helper.h>
+#include <ipmitool/log.h>
+#include <ipmitool/ipmi_intf.h>
+#include <ipmitool/ipmi_sdr.h>
+#include <ipmitool/ipmi_sel.h>
+#include <ipmitool/ipmi_sensor.h>
+
+extern int verbose;
+
+#define READING_UNAVAILABLE	0x20
+
+static
+struct ipmi_rs *
+ipmi_sensor_set_sensor_thresholds(struct ipmi_intf *intf,
+				  uint8_t sensor,
+				  uint8_t threshold, uint8_t setting)
+{
+	struct ipmi_rq req;
+	static struct sensor_set_thresh_rq set_thresh_rq;
+
+	memset(&set_thresh_rq, 0, sizeof (set_thresh_rq));
+	set_thresh_rq.sensor_num = sensor;
+	set_thresh_rq.set_mask = threshold;
+	if (threshold == UPPER_NON_RECOV_SPECIFIED)
+		set_thresh_rq.upper_non_recov = setting;
+	else if (threshold == UPPER_CRIT_SPECIFIED)
+		set_thresh_rq.upper_crit = setting;
+	else if (threshold == UPPER_NON_CRIT_SPECIFIED)
+		set_thresh_rq.upper_non_crit = setting;
+	else if (threshold == LOWER_NON_CRIT_SPECIFIED)
+		set_thresh_rq.lower_non_crit = setting;
+	else if (threshold == LOWER_CRIT_SPECIFIED)
+		set_thresh_rq.lower_crit = setting;
+	else if (threshold == LOWER_NON_RECOV_SPECIFIED)
+		set_thresh_rq.lower_non_recov = setting;
+	else
+		return NULL;
+
+	memset(&req, 0, sizeof (req));
+	req.msg.netfn = IPMI_NETFN_SE;
+	req.msg.cmd = SET_SENSOR_THRESHOLDS;
+	req.msg.data = (uint8_t *) & set_thresh_rq;
+	req.msg.data_len = sizeof (set_thresh_rq);
+
+	return intf->sendrecv(intf, &req);
+}
+
+static int
+ipmi_sensor_print_full_discrete(struct ipmi_intf *intf,
+				struct sdr_record_full_sensor *sensor)
+{
+	char id[17];
+	char *unitstr = "discrete";
+	int validread = 1;
+	uint8_t val = 0;
+	struct ipmi_rs *rsp;
+
+	if (sensor == NULL)
+		return -1;
+
+	memset(id, 0, sizeof (id));
+	memcpy(id, sensor->id_string, 16);
+
+	/*
+	 * Get current reading
+	 */
+	rsp = ipmi_sdr_get_sensor_reading_ipmb(intf,
+					       sensor->keys.sensor_num,
+					       sensor->keys.owner_id);
+	if (rsp == NULL) {
+		lprintf(LOG_ERR, "Error reading sensor %s (#%02x)",
+			id, sensor->keys.sensor_num);
+		return -1;
+	} else if (rsp->ccode > 0 || (rsp->data[1] & READING_UNAVAILABLE)) {
+		validread = 0;
+	} else {
+		/* convert RAW reading into units */
+		val = rsp->data[0];
+	}
+
+	if (csv_output) {
+		/* NOT IMPLEMENTED */
+	} else {
+		if (verbose == 0) {
+			/* output format
+			 *   id value units status thresholds....
+			 */
+			printf("%-16s ", id);
+			if (validread) {
+				printf("| 0x%-8x | %-10s | 0x%02x%02x",
+				       val,
+				       unitstr, rsp->data[2], rsp->data[3]);
+			} else {
+				printf("| %-10s | %-10s | %-6s",
+				       "na", unitstr, "na");
+			}
+			printf("| %-10s| %-10s| %-10s| %-10s| %-10s| %-10s",
+			       "na", "na", "na", "na", "na", "na");
+
+			printf("\n");
+		} else {
+			printf("Sensor ID              : %s (0x%x)\n",
+			       id, sensor->keys.sensor_num);
+			printf(" Entity ID             : %d.%d\n",
+			       sensor->entity.id, sensor->entity.instance);
+			printf(" Sensor Type (Discrete): %s\n",
+			       ipmi_sdr_get_sensor_type_desc(sensor->sensor.
+							     type));
+			ipmi_sdr_print_discrete_state("States Asserted",
+						      sensor->sensor.type,
+						      sensor->event_type,
+						      rsp->data[2],
+						      rsp->data[3]);
+			printf("\n");
+		}
+	}
+
+	return 0;
+}
+
+static int
+ipmi_sensor_print_full_analog(struct ipmi_intf *intf,
+			      struct sdr_record_full_sensor *sensor)
+{
+	char unitstr[16], id[17];
+	int i = 0, validread = 1, thresh_available = 1;
+	double val = 0.0;
+	struct ipmi_rs *rsp;
+	char *status = NULL;
+
+	if (sensor == NULL)
+		return -1;
+
+	memset(id, 0, sizeof (id));
+	memcpy(id, sensor->id_string, 16);
+
+	/* only handle linear and linearized sensors (for now) */
+	if (sensor->linearization >= SDR_SENSOR_L_NONLINEAR) {
+		printf("sensor %s non-linear!\n", id);
+		return -1;
+	}
+
+	/*
+	 * Get current reading
+	 */
+	rsp = ipmi_sdr_get_sensor_reading_ipmb(intf,
+					       sensor->keys.sensor_num,
+					       sensor->keys.owner_id);
+	if (rsp == NULL) {
+		lprintf(LOG_ERR, "Error reading sensor %s (#%02x)",
+			id, sensor->keys.sensor_num);
+		return -1;
+	} else if (rsp->ccode || (rsp->data[1] & READING_UNAVAILABLE)) {
+		validread = 0;
+	} else {
+		/* convert RAW reading into units */
+		val = (rsp->data[0] > 0)
+		    ? sdr_convert_sensor_reading(sensor, rsp->data[0])
+		    : 0;
+		status = (char *) ipmi_sdr_get_status(sensor, rsp->data[2]);
+	}
+
+	/*
+	 * Figure out units
+	 */
+	memset(unitstr, 0, sizeof (unitstr));
+	switch (sensor->unit.modifier) {
+	case 2:
+		i += snprintf(unitstr, sizeof (unitstr), "%s * %s",
+			      unit_desc[sensor->unit.type.base],
+			      unit_desc[sensor->unit.type.modifier]);
+		break;
+	case 1:
+		i += snprintf(unitstr, sizeof (unitstr), "%s/%s",
+			      unit_desc[sensor->unit.type.base],
+			      unit_desc[sensor->unit.type.modifier]);
+		break;
+	case 0:
+	default:
+		i += snprintf(unitstr, sizeof (unitstr), "%s",
+			      unit_desc[sensor->unit.type.base]);
+		break;
+	}
+
+	/*
+	 * Get sensor thresholds
+	 */
+	rsp = ipmi_sdr_get_sensor_thresholds(intf, sensor->keys.sensor_num);
+	if (rsp == NULL)
+		thresh_available = 0;
+
+	if (csv_output) {
+		/* NOT IPMLEMENTED */
+	} else {
+		if (verbose == 0) {
+			/* output format
+			 *   id value units status thresholds....
+			 */
+			printf("%-16s ", id);
+			if (validread) {
+				printf("| %-10.3f | %-10s | %-6s",
+				       val, unitstr, status ? : "");
+			} else {
+				printf("| %-10s | %-10s | %-6s",
+				       "na", unitstr, "na");
+			}
+			if (thresh_available) {
+				if (rsp->data[0] & LOWER_NON_RECOV_SPECIFIED)
+					printf("| %-10.3f",
+					       sdr_convert_sensor_reading
+					       (sensor, rsp->data[3]));
+				else
+					printf("| %-10s", "na");
+				if (rsp->data[0] & LOWER_CRIT_SPECIFIED)
+					printf("| %-10.3f",
+					       sdr_convert_sensor_reading
+					       (sensor, rsp->data[2]));
+				else
+					printf("| %-10s", "na");
+				if (rsp->data[0] & LOWER_NON_CRIT_SPECIFIED)
+					printf("| %-10.3f",
+					       sdr_convert_sensor_reading
+					       (sensor, rsp->data[1]));
+				else
+					printf("| %-10s", "na");
+				if (rsp->data[0] & UPPER_NON_CRIT_SPECIFIED)
+					printf("| %-10.3f",
+					       sdr_convert_sensor_reading
+					       (sensor, rsp->data[4]));
+				else
+					printf("| %-10s", "na");
+				if (rsp->data[0] & UPPER_CRIT_SPECIFIED)
+					printf("| %-10.3f",
+					       sdr_convert_sensor_reading
+					       (sensor, rsp->data[5]));
+				else
+					printf("| %-10s", "na");
+				if (rsp->data[0] & UPPER_NON_RECOV_SPECIFIED)
+					printf("| %-10.3f",
+					       sdr_convert_sensor_reading
+					       (sensor, rsp->data[6]));
+				else
+					printf("| %-10s", "na");
+			} else {
+				printf
+				    ("| %-10s| %-10s| %-10s| %-10s| %-10s| %-10s",
+				     "na", "na", "na", "na", "na", "na");
+			}
+
+			printf("\n");
+		} else {
+			printf("Sensor ID              : %s (0x%x)\n",
+			       id, sensor->keys.sensor_num);
+
+			printf(" Entity ID             : %d.%d\n",
+			       sensor->entity.id, sensor->entity.instance);
+
+			printf(" Sensor Type (Analog)  : %s\n",
+			       ipmi_sdr_get_sensor_type_desc(sensor->sensor.
+							     type));
+
+			printf(" Sensor Reading        : ");
+			if (validread) {
+				uint16_t raw_tol = __TO_TOL(sensor->mtol);
+				double tol =
+				    sdr_convert_sensor_reading(sensor,
+							       raw_tol * 2);
+				printf("%.*f (+/- %.*f) %s\n",
+				       (val == (int) val) ? 0 : 3, val,
+				       (tol == (int) tol) ? 0 : 3, tol,
+				       unitstr);
+				printf(" Status                : %s\n",
+				       status ? : "");
+
+				if (thresh_available) {
+					if (rsp->
+					    data[0] & LOWER_NON_RECOV_SPECIFIED)
+						printf
+						    (" Lower Non-Recoverable : %.3f\n",
+						     sdr_convert_sensor_reading
+						     (sensor, rsp->data[3]));
+					else
+						printf
+						    (" Lower Non-Recoverable : na\n");
+					if (rsp->data[0] & LOWER_CRIT_SPECIFIED)
+						printf
+						    (" Lower Critical        : %.3f\n",
+						     sdr_convert_sensor_reading
+						     (sensor, rsp->data[2]));
+					else
+						printf
+						    (" Lower Critical        : na\n");
+					if (rsp->
+					    data[0] & LOWER_NON_CRIT_SPECIFIED)
+						printf
+						    (" Lower Non-Critical    : %.3f\n",
+						     sdr_convert_sensor_reading
+						     (sensor, rsp->data[1]));
+					else
+						printf
+						    (" Lower Non-Critical    : na\n");
+					if (rsp->
+					    data[0] & UPPER_NON_CRIT_SPECIFIED)
+						printf
+						    (" Upper Non-Critical    : %.3f\n",
+						     sdr_convert_sensor_reading
+						     (sensor, rsp->data[4]));
+					else
+						printf
+						    (" Upper Non-Critical    : na\n");
+					if (rsp->data[0] & UPPER_CRIT_SPECIFIED)
+						printf
+						    (" Upper Critical        : %.3f\n",
+						     sdr_convert_sensor_reading
+						     (sensor, rsp->data[5]));
+					else
+						printf
+						    (" Upper Critical        : na\n");
+					if (rsp->
+					    data[0] & UPPER_NON_RECOV_SPECIFIED)
+						printf
+						    (" Upper Non-Recoverable : %.3f\n",
+						     sdr_convert_sensor_reading
+						     (sensor, rsp->data[6]));
+					else
+						printf
+						    (" Upper Non-Recoverable : na\n");
+				}
+			} else {
+				printf("Not Present\n");
+			}
+
+			ipmi_sdr_print_sensor_event_status(intf,
+							   sensor->keys.
+							   sensor_num,
+							   sensor->sensor.type,
+							   sensor->event_type,
+							   ANALOG_SENSOR);
+			ipmi_sdr_print_sensor_event_enable(intf,
+							   sensor->keys.
+							   sensor_num,
+							   sensor->sensor.type,
+							   sensor->event_type,
+							   ANALOG_SENSOR);
+
+			printf("\n");
+		}
+	}
+
+	return 0;
+}
+
+int
+ipmi_sensor_print_full(struct ipmi_intf *intf,
+		       struct sdr_record_full_sensor *sensor)
+{
+	if (sensor->unit.analog != 3)
+		return ipmi_sensor_print_full_analog(intf, sensor);
+	else
+		return ipmi_sensor_print_full_discrete(intf, sensor);
+}
+
+int
+ipmi_sensor_print_compact(struct ipmi_intf *intf,
+			  struct sdr_record_compact_sensor *sensor)
+{
+	char id[17];
+	char *unitstr = "discrete";
+	int validread = 1;
+	uint8_t val = 0;
+	struct ipmi_rs *rsp;
+
+	if (sensor == NULL)
+		return -1;
+
+	memset(id, 0, sizeof (id));
+	memcpy(id, sensor->id_string, 16);
+
+	/*
+	 * Get current reading
+	 */
+	rsp = ipmi_sdr_get_sensor_reading_ipmb(intf,
+					       sensor->keys.sensor_num,
+					       sensor->keys.owner_id);
+	if (rsp == NULL) {
+		lprintf(LOG_ERR, "Error reading sensor %s (#%02x)",
+			id, sensor->keys.sensor_num);
+		return -1;
+	} else if (rsp->ccode || (rsp->data[1] & READING_UNAVAILABLE)) {
+		validread = 0;
+	} else {
+		/* convert RAW reading into units */
+		val = rsp->data[0];
+	}
+
+	if (csv_output) {
+		/* NOT IMPLEMENTED */
+	} else {
+		if (!verbose) {
+			/* output format
+			 *   id value units status thresholds....
+			 */
+			printf("%-16s ", id);
+
+			if (validread) {
+				printf("| 0x%-8x | %-10s | 0x%02x%02x",
+				       val, unitstr,
+				       rsp->data[2], rsp->data[3]);
+			} else {
+				printf("| %-10s | %-10s | %-6s",
+				       "na", unitstr, "na");
+			}
+
+			printf("| %-10s| %-10s| %-10s| %-10s| %-10s| %-10s",
+			       "na", "na", "na", "na", "na", "na");
+			printf("\n");
+		} else {
+			printf("Sensor ID              : %s (0x%x)\n",
+			       id, sensor->keys.sensor_num);
+			printf(" Entity ID             : %d.%d\n",
+			       sensor->entity.id, sensor->entity.instance);
+			printf(" Sensor Type (Discrete): %s\n",
+			       ipmi_sdr_get_sensor_type_desc(sensor->sensor.
+							     type));
+			ipmi_sdr_print_discrete_state("States Asserted",
+						      sensor->sensor.type,
+						      sensor->event_type,
+						      rsp->data[2],
+						      rsp->data[3]);
+			printf("\n");
+		}
+	}
+
+	return 0;
+}
+
+static int
+ipmi_sensor_list(struct ipmi_intf *intf)
+{
+	struct sdr_get_rs *header;
+	struct ipmi_sdr_iterator *itr;
+	int rc = 0;
+
+	lprintf(LOG_DEBUG, "Querying SDR for sensor list");
+
+	itr = ipmi_sdr_start(intf);
+	if (itr == NULL) {
+		lprintf(LOG_ERR, "Unable to open SDR for reading");
+		return -1;
+	}
+
+	while ((header = ipmi_sdr_get_next_header(intf, itr)) != NULL) {
+		int r = 0;
+		uint8_t *rec;
+
+		rec = ipmi_sdr_get_record(intf, header, itr);
+		if (rec == NULL) {
+			lprintf(LOG_DEBUG, "rec == NULL");
+			continue;
+		}
+
+		switch (header->type) {
+		case SDR_RECORD_TYPE_FULL_SENSOR:
+			r = ipmi_sensor_print_full(intf,
+						   (struct
+						    sdr_record_full_sensor *)
+						   rec);
+			break;
+		case SDR_RECORD_TYPE_COMPACT_SENSOR:
+			r = ipmi_sensor_print_compact(intf,
+						      (struct
+						       sdr_record_compact_sensor
+						       *) rec);
+			break;
+		}
+		free(rec);
+
+		/* save any errors */
+		rc = (r == 0) ? rc : r;
+	}
+
+	ipmi_sdr_end(intf, itr);
+
+	return rc;
+}
+
+static const struct valstr threshold_vals[] = {
+	{UPPER_NON_RECOV_SPECIFIED, "Upper Non-Recoverable"},
+	{UPPER_CRIT_SPECIFIED, "Upper Critical"},
+	{UPPER_NON_CRIT_SPECIFIED, "Upper Non-Critical"},
+	{LOWER_NON_RECOV_SPECIFIED, "Lower Non-Recoverable"},
+	{LOWER_CRIT_SPECIFIED, "Lower Critical"},
+	{LOWER_NON_CRIT_SPECIFIED, "Lower Non-Critical"},
+	{0x00, NULL},
+};
+
+static int
+__ipmi_sensor_set_threshold(struct ipmi_intf *intf,
+			    uint8_t num, uint8_t mask, uint8_t setting)
+{
+	struct ipmi_rs *rsp;
+
+	rsp = ipmi_sensor_set_sensor_thresholds(intf, num, mask, setting);
+
+	if (rsp == NULL) {
+		lprintf(LOG_ERR, "Error setting threshold");
+		return -1;
+	}
+	if (rsp->ccode > 0) {
+		lprintf(LOG_ERR, "Error setting threshold: %s",
+			val2str(rsp->ccode, completion_code_vals));
+		return -1;
+	}
+
+	return 0;
+}
+
+static int
+ipmi_sensor_set_threshold(struct ipmi_intf *intf, int argc, char **argv)
+{
+	char *id, *thresh;
+	uint8_t settingMask = 0;
+	double setting1 = 0.0, setting2 = 0.0, setting3 = 0.0;
+	int allUpper = 0, allLower = 0;
+	int ret = 0;
+
+	struct sdr_record_list *sdr;
+
+	if (argc < 3 || strncmp(argv[0], "help", 4) == 0) {
+		lprintf(LOG_NOTICE, "sensor thresh <id> <threshold> <setting>");
+		lprintf(LOG_NOTICE,
+			"   id        : name of the sensor for which threshold is to be set");
+		lprintf(LOG_NOTICE, "   threshold : which threshold to set");
+		lprintf(LOG_NOTICE,
+			"                 unr = upper non-recoverable");
+		lprintf(LOG_NOTICE, "                 ucr = upper critical");
+		lprintf(LOG_NOTICE,
+			"                 unc = upper non-critical");
+		lprintf(LOG_NOTICE,
+			"                 lnc = lower non-critical");
+		lprintf(LOG_NOTICE, "                 lcr = lower critical");
+		lprintf(LOG_NOTICE,
+			"                 lnr = lower non-recoverable");
+		lprintf(LOG_NOTICE,
+			"   setting   : the value to set the threshold to");
+		lprintf(LOG_NOTICE, "");
+		lprintf(LOG_NOTICE,
+			"sensor thresh <id> lower <lnr> <lcr> <lnc>");
+		lprintf(LOG_NOTICE,
+			"   Set all lower thresholds at the same time");
+		lprintf(LOG_NOTICE, "");
+		lprintf(LOG_NOTICE,
+			"sensor thresh <id> upper <unc> <ucr> <unr>");
+		lprintf(LOG_NOTICE,
+			"   Set all upper thresholds at the same time");
+		lprintf(LOG_NOTICE, "");
+		return 0;
+	}
+
+	id = argv[0];
+	thresh = argv[1];
+
+	if (strncmp(thresh, "upper", 5) == 0) {
+		if (argc < 5) {
+			lprintf(LOG_ERR,
+				"usage: sensor thresh <id> upper <unc> <ucr> <unr>");
+			return -1;
+		}
+		allUpper = 1;
+		setting1 = (double) strtod(argv[2], NULL);
+		setting2 = (double) strtod(argv[3], NULL);
+		setting3 = (double) strtod(argv[4], NULL);
+	} else if (strncmp(thresh, "lower", 5) == 0) {
+		if (argc < 5) {
+			lprintf(LOG_ERR,
+				"usage: sensor thresh <id> lower <unc> <ucr> <unr>");
+			return -1;
+		}
+		allLower = 1;
+		setting1 = (double) strtod(argv[2], NULL);
+		setting2 = (double) strtod(argv[3], NULL);
+		setting3 = (double) strtod(argv[4], NULL);
+	} else {
+		setting1 = (double) atof(argv[2]);
+		if (strncmp(thresh, "unr", 3) == 0)
+			settingMask = UPPER_NON_RECOV_SPECIFIED;
+		else if (strncmp(thresh, "ucr", 3) == 0)
+			settingMask = UPPER_CRIT_SPECIFIED;
+		else if (strncmp(thresh, "unc", 3) == 0)
+			settingMask = UPPER_NON_CRIT_SPECIFIED;
+		else if (strncmp(thresh, "lnc", 3) == 0)
+			settingMask = LOWER_NON_CRIT_SPECIFIED;
+		else if (strncmp(thresh, "lcr", 3) == 0)
+			settingMask = LOWER_CRIT_SPECIFIED;
+		else if (strncmp(thresh, "lnr", 3) == 0)
+			settingMask = LOWER_NON_RECOV_SPECIFIED;
+		else {
+			lprintf(LOG_ERR,
+				"Valid threshold '%s' for sensor '%s' not specified!",
+				thresh, id);
+			return -1;
+		}
+	}
+
+	printf("Locating sensor record '%s'...\n", id);
+
+	/* lookup by sensor name */
+	sdr = ipmi_sdr_find_sdr_byid(intf, id);
+	if (sdr == NULL) {
+		lprintf(LOG_ERR, "Sensor data record not found!");
+		return -1;
+	}
+
+	if (sdr->type != SDR_RECORD_TYPE_FULL_SENSOR) {
+		lprintf(LOG_ERR, "Invalid sensor type %02x", sdr->type);
+		return -1;
+	}
+
+	if (allUpper) {
+		settingMask = UPPER_NON_CRIT_SPECIFIED;
+		printf("Setting sensor \"%s\" %s threshold to %.3f\n",
+		       sdr->record.full->id_string,
+		       val2str(settingMask, threshold_vals), setting1);
+		ret = __ipmi_sensor_set_threshold(intf,
+						  sdr->record.full->keys.
+						  sensor_num, settingMask,
+						  sdr_convert_sensor_value_to_raw
+						  (sdr->record.full, setting1));
+
+		settingMask = UPPER_CRIT_SPECIFIED;
+		printf("Setting sensor \"%s\" %s threshold to %.3f\n",
+		       sdr->record.full->id_string,
+		       val2str(settingMask, threshold_vals), setting2);
+		ret = __ipmi_sensor_set_threshold(intf,
+						  sdr->record.full->keys.
+						  sensor_num, settingMask,
+						  sdr_convert_sensor_value_to_raw
+						  (sdr->record.full, setting2));
+
+		settingMask = UPPER_NON_RECOV_SPECIFIED;
+		printf("Setting sensor \"%s\" %s threshold to %.3f\n",
+		       sdr->record.full->id_string,
+		       val2str(settingMask, threshold_vals), setting3);
+		ret = __ipmi_sensor_set_threshold(intf,
+						  sdr->record.full->keys.
+						  sensor_num, settingMask,
+						  sdr_convert_sensor_value_to_raw
+						  (sdr->record.full, setting3));
+	} else if (allLower) {
+		settingMask = LOWER_NON_RECOV_SPECIFIED;
+		printf("Setting sensor \"%s\" %s threshold to %.3f\n",
+		       sdr->record.full->id_string,
+		       val2str(settingMask, threshold_vals), setting1);
+		ret = __ipmi_sensor_set_threshold(intf,
+						  sdr->record.full->keys.
+						  sensor_num, settingMask,
+						  sdr_convert_sensor_value_to_raw
+						  (sdr->record.full, setting1));
+
+		settingMask = LOWER_CRIT_SPECIFIED;
+		printf("Setting sensor \"%s\" %s threshold to %.3f\n",
+		       sdr->record.full->id_string,
+		       val2str(settingMask, threshold_vals), setting2);
+		ret = __ipmi_sensor_set_threshold(intf,
+						  sdr->record.full->keys.
+						  sensor_num, settingMask,
+						  sdr_convert_sensor_value_to_raw
+						  (sdr->record.full, setting2));
+
+		settingMask = LOWER_NON_CRIT_SPECIFIED;
+		printf("Setting sensor \"%s\" %s threshold to %.3f\n",
+		       sdr->record.full->id_string,
+		       val2str(settingMask, threshold_vals), setting3);
+		ret = __ipmi_sensor_set_threshold(intf,
+						  sdr->record.full->keys.
+						  sensor_num, settingMask,
+						  sdr_convert_sensor_value_to_raw
+						  (sdr->record.full, setting3));
+	} else {
+		printf("Setting sensor \"%s\" %s threshold to %.3f\n",
+		       sdr->record.full->id_string,
+		       val2str(settingMask, threshold_vals), setting1);
+
+		ret = __ipmi_sensor_set_threshold(intf,
+						  sdr->record.full->keys.
+						  sensor_num, settingMask,
+						  sdr_convert_sensor_value_to_raw
+						  (sdr->record.full, setting1));
+	}
+
+	return ret;
+}
+
+static int
+ipmi_sensor_get_reading(struct ipmi_intf *intf, int argc, char **argv)
+{
+	struct sdr_record_list *sdr;
+	struct ipmi_rs *rsp;
+	int i, rc=0;
+	double val = 0.0;
+
+	if (argc < 1 || strncmp(argv[0], "help", 4) == 0) {
+		lprintf(LOG_NOTICE, "sensor reading <id> ... [id]");
+		lprintf(LOG_NOTICE, "   id        : name of desired sensor");
+		return -1;
+	}
+
+	for (i = 0; i < argc; i++) {
+		sdr = ipmi_sdr_find_sdr_byid(intf, argv[i]);
+		if (sdr == NULL) {
+			lprintf(LOG_ERR, "Sensor \"%s\" not found!",
+				argv[i]);
+			rc = -1;
+			continue;
+		}
+
+		switch (sdr->type) {
+		case SDR_RECORD_TYPE_FULL_SENSOR:
+			if (sdr->record.full->linearization >= SDR_SENSOR_L_NONLINEAR) {
+				lprintf(LOG_ERR, "Sensor \"%s\" non-linear!", argv[i]);
+				continue;
+			}
+			rsp = ipmi_sdr_get_sensor_reading_ipmb(intf,
+							       sdr->record.full->keys.sensor_num,
+							       sdr->record.full->keys.owner_id);
+			if (rsp == NULL) {
+				lprintf(LOG_ERR, "Error reading sensor \"%s\"", argv[i]);
+				rc = -1;
+				continue;
+			} else if (rsp->ccode > 0) {
+				continue;
+			} else if (rsp->data[1] & READING_UNAVAILABLE) {
+				continue;
+			} else if (rsp->data[0] > 0) {
+				/* convert RAW reading into units */
+				val = sdr_convert_sensor_reading(sdr->record.full, rsp->data[0]);
+			} else {
+				val = 0.0;
+			}
+
+			if (csv_output)
+				printf("%s,%.*f\n", argv[i],
+				       (val == (int)val) ? 0 : 3, val);
+			else
+				printf("%-16s | %.*f\n", argv[i],
+				       (val == (int)val) ? 0 : 3, val);
+
+			break;
+
+		case SDR_RECORD_TYPE_COMPACT_SENSOR:
+			break;
+		default:
+			continue;
+		}
+	}
+
+	return rc;
+}
+
+static int
+ipmi_sensor_get(struct ipmi_intf *intf, int argc, char **argv)
+{
+	struct sdr_record_list *sdr;
+	int i, v;
+	int rc = 0;
+
+	if (argc < 1 || strncmp(argv[0], "help", 4) == 0) {
+		lprintf(LOG_NOTICE, "sensor get <id> ... [id]");
+		lprintf(LOG_NOTICE, "   id        : name of desired sensor");
+		return -1;
+	}
+	printf("Locating sensor record...\n");
+
+	/* lookup by sensor name */
+	for (i = 0; i < argc; i++) {
+		int r = 0;
+
+		sdr = ipmi_sdr_find_sdr_byid(intf, argv[i]);
+		if (sdr == NULL) {
+			lprintf(LOG_ERR, "Sensor data record \"%s\" not found!",
+				argv[i]);
+			rc = -1;
+			continue;
+		}
+
+		/* need to set verbose level to 1 */
+		v = verbose;
+		verbose = 1;
+		switch (sdr->type) {
+		case SDR_RECORD_TYPE_FULL_SENSOR:
+			r = ipmi_sensor_print_full(intf, sdr->record.full);
+			break;
+		case SDR_RECORD_TYPE_COMPACT_SENSOR:
+			r = ipmi_sensor_print_compact(intf,
+						      sdr->record.compact);
+			break;
+		case SDR_RECORD_TYPE_EVENTONLY_SENSOR:
+			r = ipmi_sdr_print_sensor_eventonly(intf,
+							    sdr->record.
+							    eventonly);
+			break;
+		case SDR_RECORD_TYPE_FRU_DEVICE_LOCATOR:
+			r = ipmi_sdr_print_sensor_fru_locator(intf,
+							      sdr->record.
+							      fruloc);
+			break;
+		case SDR_RECORD_TYPE_MC_DEVICE_LOCATOR:
+			r = ipmi_sdr_print_sensor_mc_locator(intf,
+							     sdr->record.mcloc);
+			break;
+		}
+		verbose = v;
+
+		/* save errors */
+		rc = (r == 0) ? rc : r;
+	}
+
+	return rc;
+}
+
+int
+ipmi_sensor_main(struct ipmi_intf *intf, int argc, char **argv)
+{
+	int rc = 0;
+
+	if (argc == 0) {
+		rc = ipmi_sensor_list(intf);
+	} else if (strncmp(argv[0], "help", 4) == 0) {
+		lprintf(LOG_NOTICE, "Sensor Commands:  list thresh get reading");
+	} else if (strncmp(argv[0], "list", 4) == 0) {
+		rc = ipmi_sensor_list(intf);
+	} else if (strncmp(argv[0], "thresh", 5) == 0) {
+		rc = ipmi_sensor_set_threshold(intf, argc - 1, &argv[1]);
+	} else if (strncmp(argv[0], "get", 3) == 0) {
+		rc = ipmi_sensor_get(intf, argc - 1, &argv[1]);
+	} else if (strncmp(argv[0], "reading", 7) == 0) {
+		rc = ipmi_sensor_get_reading(intf, argc - 1, &argv[1]);
+	} else {
+		lprintf(LOG_ERR, "Invalid sensor command: %s", argv[0]);
+		rc = -1;
+	}
+
+	return rc;
+}

ipmitool/lib/ipmi_session.c

@@ -0,0 +1,449 @@
+/*
+ * Copyright (c) 2003 Sun Microsystems, Inc.  All Rights Reserved.
+ * 
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 
+ * Redistribution of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 
+ * Redistribution in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * 
+ * Neither the name of Sun Microsystems, Inc. or the names of
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ * 
+ * This software is provided "AS IS," without a warranty of any kind.
+ * ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND WARRANTIES,
+ * INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A
+ * PARTICULAR PURPOSE OR NON-INFRINGEMENT, ARE HEREBY EXCLUDED.
+ * SUN MICROSYSTEMS, INC. ("SUN") AND ITS LICENSORS SHALL NOT BE LIABLE
+ * FOR ANY DAMAGES SUFFERED BY LICENSEE AS A RESULT OF USING, MODIFYING
+ * OR DISTRIBUTING THIS SOFTWARE OR ITS DERIVATIVES.  IN NO EVENT WILL
+ * SUN OR ITS LICENSORS BE LIABLE FOR ANY LOST REVENUE, PROFIT OR DATA,
+ * OR FOR DIRECT, INDIRECT, SPECIAL, CONSEQUENTIAL, INCIDENTAL OR
+ * PUNITIVE DAMAGES, HOWEVER CAUSED AND REGARDLESS OF THE THEORY OF
+ * LIABILITY, ARISING OUT OF THE USE OF OR INABILITY TO USE THIS SOFTWARE,
+ * EVEN IF SUN HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
+ */
+
+#include <stdlib.h>
+#include <stdio.h>
+#include <string.h>
+#include <sys/types.h>
+#include <sys/socket.h>
+#include <netinet/in.h>
+#include <arpa/inet.h>
+#include <errno.h>
+#include <unistd.h>
+#include <signal.h>
+
+#include <ipmitool/ipmi.h>
+#include <ipmitool/ipmi_intf.h>
+#include <ipmitool/helper.h>
+#include <ipmitool/log.h>
+#include <ipmitool/ipmi_lanp.h>
+#include <ipmitool/ipmi_session.h>
+#include <ipmitool/ipmi_strings.h>
+#include <ipmitool/bswap.h>
+
+
+typedef enum {
+	IPMI_SESSION_REQUEST_CURRENT = 0,
+	IPMI_SESSION_REQUEST_ALL,
+	IPMI_SESSION_REQUEST_BY_ID,
+	IPMI_SESSION_REQUEST_BY_HANDLE
+} Ipmi_Session_Request_Type;
+
+
+
+
+/*
+ * print_session_info_csv
+ */
+static void
+print_session_info_csv(const struct  get_session_info_rsp * session_info,
+					   int data_len)
+{
+	char     buffer[18];
+	uint16_t console_port_tmp;
+	
+	printf("%d", session_info->session_handle);
+	printf(",%d", session_info->session_slot_count);
+	printf(",%d", session_info->active_session_count);
+
+	if (data_len == 3)
+	{
+		/* There is no session data here*/
+		printf("\n");
+		return;
+	}
+
+	printf(",%d", session_info->user_id);
+	printf(",%s", val2str(session_info->privilege_level, ipmi_privlvl_vals));
+
+	printf(",%s", session_info->auxiliary_data?
+		   "IPMIv2/RMCP+" : "IPMIv1.5");
+
+	printf(",0x%02x", session_info->channel_number);
+
+	if (data_len == 18)
+	{
+		/* We have 802.3 LAN data */
+		printf(",%s",
+			   inet_ntop(AF_INET,
+						 &(session_info->channel_data.lan_data.console_ip),
+						 buffer,
+						 16));
+
+		printf(",%02x:%02x:%02x:%02x:%02x:%02x",
+			   session_info->channel_data.lan_data.console_mac[0],
+			   session_info->channel_data.lan_data.console_mac[1],
+			   session_info->channel_data.lan_data.console_mac[2],
+			   session_info->channel_data.lan_data.console_mac[3],
+			   session_info->channel_data.lan_data.console_mac[4],
+			   session_info->channel_data.lan_data.console_mac[5]);
+
+		console_port_tmp = session_info->channel_data.lan_data.console_port;
+		#if WORDS_BIGENDIAN
+		console_port_tmp = BSWAP_16(console_port_tmp);
+		#endif
+		printf(",%d", console_port_tmp);
+	}
+
+
+	else if ((data_len == 12) || (data_len == 14))
+	{
+		/* Channel async serial/modem */
+		printf(",%s",
+			   val2str(session_info->channel_data.modem_data.session_channel_activity_type,
+					   ipmi_channel_activity_type_vals));
+
+		printf(",%d",
+			   session_info->channel_data.modem_data.destination_selector);
+
+		printf(",%s",
+			   inet_ntop(AF_INET,
+						 &(session_info->channel_data.modem_data.console_ip),
+						 buffer,
+						 16));
+
+		if (data_len == 14)
+		{
+			/* Connection is PPP */
+			console_port_tmp = session_info->channel_data.lan_data.console_port;
+			#if WORDS_BIGENDIAN
+			console_port_tmp = BSWAP_16(console_port_tmp);
+			#endif
+			printf(",%d", console_port_tmp);
+		}
+	}
+
+	printf("\n");
+}
+
+
+
+/*
+ * print_session_info_verbose
+ */
+static void
+print_session_info_verbose(const struct  get_session_info_rsp * session_info,
+						   int data_len)
+{
+	char     buffer[18];
+	uint16_t console_port_tmp;
+	
+	printf("session handle                : %d\n", session_info->session_handle);
+	printf("slot count                    : %d\n", session_info->session_slot_count);
+	printf("active sessions               : %d\n", session_info->active_session_count);
+
+	if (data_len == 3)
+	{
+		/* There is no session data here */
+		printf("\n");
+		return;
+	}
+
+	printf("user id                       : %d\n", session_info->user_id);
+	printf("privilege level               : %s\n",
+		   val2str(session_info->privilege_level, ipmi_privlvl_vals));
+	
+	printf("session type                  : %s\n", session_info->auxiliary_data?
+		   "IPMIv2/RMCP+" : "IPMIv1.5");
+
+	printf("channel number                : 0x%02x\n", session_info->channel_number);
+
+	
+	if (data_len == 18)
+	{
+		/* We have 802.3 LAN data */
+		printf("console ip                    : %s\n",
+			   inet_ntop(AF_INET,
+						 &(session_info->channel_data.lan_data.console_ip),
+						 buffer,
+						 16));
+
+		printf("console mac                   : %02x:%02x:%02x:%02x:%02x:%02x\n",
+			   session_info->channel_data.lan_data.console_mac[0],
+			   session_info->channel_data.lan_data.console_mac[1],
+			   session_info->channel_data.lan_data.console_mac[2],
+			   session_info->channel_data.lan_data.console_mac[3],
+			   session_info->channel_data.lan_data.console_mac[4],
+			   session_info->channel_data.lan_data.console_mac[5]);
+
+		console_port_tmp = session_info->channel_data.lan_data.console_port;
+		#if WORDS_BIGENDIAN
+		console_port_tmp = BSWAP_16(console_port_tmp);
+		#endif
+		printf("console port                  : %d\n", console_port_tmp);
+	}
+
+
+	else if ((data_len == 12) || (data_len == 14))
+	{
+		/* Channel async serial/modem */
+		printf("Session/Channel Activity Type : %s\n",
+			   val2str(session_info->channel_data.modem_data.session_channel_activity_type,
+					   ipmi_channel_activity_type_vals));
+
+		printf("Destination selector          : %d\n",
+			   session_info->channel_data.modem_data.destination_selector);
+
+		printf("console ip                    : %s\n",
+			   inet_ntop(AF_INET,
+						 &(session_info->channel_data.modem_data.console_ip),
+						 buffer,
+						 16));
+
+		if (data_len == 14)
+		{
+			/* Connection is PPP */
+			console_port_tmp = session_info->channel_data.lan_data.console_port;
+			#if WORDS_BIGENDIAN
+			console_port_tmp = BSWAP_16(console_port_tmp);
+			#endif
+			printf("console port                  : %d\n", console_port_tmp);
+		}
+	}
+
+	printf("\n");
+}
+
+
+static void print_session_info(const struct  get_session_info_rsp * session_info,
+							   int data_len)
+{
+	if (csv_output)
+		print_session_info_csv(session_info, data_len);
+	else
+		print_session_info_verbose(session_info, data_len);
+}
+
+
+/*
+ * ipmi_get_session_info
+ *
+ * returns 0 on success
+ *         -1 on error
+ */
+int
+ipmi_get_session_info(struct ipmi_intf         * intf,
+					  Ipmi_Session_Request_Type  session_request_type,
+					  uint32_t                   id_or_handle)
+{
+	int i, retval = 0;
+
+	struct ipmi_rs * rsp;
+	struct ipmi_rq req;
+	uint8_t rqdata[5]; //  max length of the variable length request
+	struct get_session_info_rsp   session_info;
+
+	memset(&req, 0, sizeof(req));
+	memset(&session_info, 0, sizeof(session_info));
+	req.msg.netfn = IPMI_NETFN_APP;        // 0x06
+	req.msg.cmd   = IPMI_GET_SESSION_INFO; // 0x3D
+	req.msg.data = rqdata;
+
+	switch (session_request_type)
+	{
+		
+	case IPMI_SESSION_REQUEST_CURRENT:
+	case IPMI_SESSION_REQUEST_BY_ID:	
+	case IPMI_SESSION_REQUEST_BY_HANDLE:
+		switch (session_request_type)
+		{
+		case IPMI_SESSION_REQUEST_CURRENT:
+			rqdata[0]        = 0x00;
+			req.msg.data_len = 1;
+			break;
+		case IPMI_SESSION_REQUEST_BY_ID:	
+			rqdata[0]        = 0xFF;
+			rqdata[1]        = id_or_handle         & 0x000000FF;
+			rqdata[2]        = (id_or_handle >> 8)  & 0x000000FF;
+			rqdata[3]        = (id_or_handle >> 16) & 0x000000FF;
+			rqdata[4]        = (id_or_handle >> 24) & 0x000000FF;
+			req.msg.data_len = 5;
+			break;
+		case IPMI_SESSION_REQUEST_BY_HANDLE:
+			rqdata[0]        = 0xFE;
+			rqdata[1]        = (uint8_t)id_or_handle;
+			req.msg.data_len = 2;
+			break;
+		case IPMI_SESSION_REQUEST_ALL:
+			break;
+		}
+
+		rsp = intf->sendrecv(intf, &req);
+		if (rsp == NULL)
+		{
+			lprintf(LOG_ERR, "Get Session Info command failed");
+			retval = -1;
+		}
+		else if (rsp->ccode > 0)
+		{
+			lprintf(LOG_ERR, "Get Session Info command failed: %s",
+				val2str(rsp->ccode, completion_code_vals));
+			retval = -1;
+		}
+
+		if (retval < 0)
+		{
+			if ((session_request_type == IPMI_SESSION_REQUEST_CURRENT) &&
+			    (strncmp(intf->name, "lan", 3) != 0))
+				lprintf(LOG_ERR, "It is likely that the channel in use "
+					"does not support sessions");
+		}
+		else
+		{
+			memcpy(&session_info,  rsp->data, rsp->data_len);
+			print_session_info(&session_info, rsp->data_len);
+		}
+		break;
+		
+	case IPMI_SESSION_REQUEST_ALL:
+		req.msg.data_len = 1;
+		i = 1;
+		do
+		{
+			rqdata[0] = i++;
+			rsp = intf->sendrecv(intf, &req);
+			
+			if (rsp == NULL)
+			{
+				lprintf(LOG_ERR, "Get Session Info command failed");
+				retval = -1;
+				break;
+			}
+			else if (rsp->ccode > 0 && rsp->ccode != 0xCC && rsp->ccode != 0xCB)
+			{
+				lprintf(LOG_ERR, "Get Session Info command failed: %s",
+					val2str(rsp->ccode, completion_code_vals));
+				retval = -1;
+				break;
+			}
+			else if (rsp->data_len < 3)
+			{
+				retval = -1;
+				break;
+			}
+
+			memcpy(&session_info,  rsp->data, rsp->data_len);
+			print_session_info(&session_info, rsp->data_len);
+			
+		} while (i <= session_info.session_slot_count);
+		break;
+	}
+
+	return retval;
+}
+
+
+
+static void
+printf_session_usage(void)
+{
+	lprintf(LOG_NOTICE, "Session Commands: info <active | all | id 0xnnnnnnnn | handle 0xnn>");
+}
+
+
+int
+ipmi_session_main(struct ipmi_intf * intf, int argc, char ** argv)
+{
+	int retval = 0;
+
+	if (argc == 0 || strncmp(argv[0], "help", 4) == 0)
+	{
+		printf_session_usage();
+	}
+	else if (strncmp(argv[0], "info", 4) == 0)
+	{
+
+		if ((argc < 2) || strncmp(argv[1], "help", 4) == 0)
+		{
+				printf_session_usage();
+		}
+		else
+		{
+			Ipmi_Session_Request_Type session_request_type = 0;
+			uint32_t                  id_or_handle = 0;
+
+			if (strncmp(argv[1], "active", 6) == 0)
+				session_request_type = IPMI_SESSION_REQUEST_CURRENT;
+			else if (strncmp(argv[1], "all", 3) == 0)
+				session_request_type = IPMI_SESSION_REQUEST_ALL;
+			else if (strncmp(argv[1], "id", 2) == 0)
+			{
+				if (argc >= 3)
+				{
+					session_request_type = IPMI_SESSION_REQUEST_BY_ID;
+					id_or_handle = strtol(argv[2], NULL, 16);
+				}
+				else
+				{
+					lprintf(LOG_ERR, "Missing id argument");
+					printf_session_usage();
+					retval = -1;
+				}
+			}
+			else if (strncmp(argv[1], "handle", 6) == 0)
+			{
+				if (argc >= 3)
+				{
+					session_request_type = IPMI_SESSION_REQUEST_BY_HANDLE;
+					id_or_handle = strtol(argv[2], NULL, 16);
+				}
+				else
+				{
+					lprintf(LOG_ERR, "Missing handle argument");
+					printf_session_usage();
+					retval = -1;
+				}
+			}
+			else
+			{
+				lprintf(LOG_ERR, "Invalid SESSION info parameter: %s", argv[1]);
+				printf_session_usage();
+				retval = -1;
+			}
+			
+
+			if (retval == 0)
+				retval = ipmi_get_session_info(intf,
+											   session_request_type,
+											   id_or_handle);
+		}
+	}
+	else
+	{
+		lprintf(LOG_ERR, "Invalid SESSION command: %s", argv[0]);
+		printf_session_usage();
+		retval = -1;
+	}
+
+	return retval;
+}
+

ipmitool/lib/ipmi_strings.c

@@ -0,0 +1,319 @@
+/*
+ * Copyright (c) 2003 Sun Microsystems, Inc.  All Rights Reserved.
+ * 
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 
+ * Redistribution of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 
+ * Redistribution in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * 
+ * Neither the name of Sun Microsystems, Inc. or the names of
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ * 
+ * This software is provided "AS IS," without a warranty of any kind.
+ * ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND WARRANTIES,
+ * INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A
+ * PARTICULAR PURPOSE OR NON-INFRINGEMENT, ARE HEREBY EXCLUDED.
+ * SUN MICROSYSTEMS, INC. ("SUN") AND ITS LICENSORS SHALL NOT BE LIABLE
+ * FOR ANY DAMAGES SUFFERED BY LICENSEE AS A RESULT OF USING, MODIFYING
+ * OR DISTRIBUTING THIS SOFTWARE OR ITS DERIVATIVES.  IN NO EVENT WILL
+ * SUN OR ITS LICENSORS BE LIABLE FOR ANY LOST REVENUE, PROFIT OR DATA,
+ * OR FOR DIRECT, INDIRECT, SPECIAL, CONSEQUENTIAL, INCIDENTAL OR
+ * PUNITIVE DAMAGES, HOWEVER CAUSED AND REGARDLESS OF THE THEORY OF
+ * LIABILITY, ARISING OUT OF THE USE OF OR INABILITY TO USE THIS SOFTWARE,
+ * EVEN IF SUN HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
+ */
+
+#include <stddef.h>
+#include <ipmitool/ipmi_strings.h>
+#include <ipmitool/ipmi_constants.h>
+#include <ipmitool/ipmi_sensor.h>
+#include <ipmitool/ipmi_sel.h>  /* for IPMI_OEM */
+
+const struct valstr ipmi_oem_info[] = {
+
+   { IPMI_OEM_UNKNOWN,    "Unknown" },
+   { IPMI_OEM_SUN,        "Sun Microsystems" },
+   { IPMI_OEM_INTEL,      "Intel Corporation" },
+   { IPMI_OEM_TYAN,       "Tyan Computer Corporation" },
+   { IPMI_OEM_NEWISYS,    "Newisys" },
+   { IPMI_OEM_SUPERMICRO, "Supermicro" },
+   { IPMI_OEM_KONTRON,    "Kontron" },
+   { 0xffff , NULL },
+};
+
+const struct valstr ipmi_netfn_vals[] = {
+	{ IPMI_NETFN_CHASSIS,	"Chassis" },
+	{ IPMI_NETFN_BRIDGE,	"Bridge" },
+	{ IPMI_NETFN_SE,	"SensorEvent" },
+	{ IPMI_NETFN_APP,	"Application" },
+	{ IPMI_NETFN_FIRMWARE,	"Firmware" },
+	{ IPMI_NETFN_STORAGE,	"Storage" },
+	{ IPMI_NETFN_TRANSPORT,	"Transport" },
+	{ 0xff,			NULL },
+};
+
+/*
+ * From table 26-4 of the IPMI v2 specification
+ */
+const struct valstr impi_bit_rate_vals[] = {
+	{ 0x00, "IPMI-Over-Serial-Setting"}, /* Using the value in the IPMI Over Serial Config */
+	{ 0x06, "9.6" },
+	{ 0x07, "19.2" },
+	{ 0x08, "38.4" },
+	{ 0x09, "57.6" },
+	{ 0x0A, "115.2" },
+	{ 0x00, NULL },
+};
+
+const struct valstr ipmi_channel_activity_type_vals[] = {
+	{ 0, "IPMI Messaging session active" },
+	{ 1, "Callback Messaging session active" },
+	{ 2, "Dial-out Alert active" },
+	{ 3, "TAP Page Active" },
+	{ 0x00, NULL },
+};
+
+
+const struct valstr ipmi_privlvl_vals[] = {
+	{ IPMI_SESSION_PRIV_CALLBACK,   "CALLBACK" },
+	{ IPMI_SESSION_PRIV_USER,    	"USER" },
+	{ IPMI_SESSION_PRIV_OPERATOR,	"OPERATOR" },
+	{ IPMI_SESSION_PRIV_ADMIN,	    "ADMINISTRATOR" },
+	{ IPMI_SESSION_PRIV_OEM,    	"OEM" },
+	{ 0xF,	        		    	"NO ACCESS" },
+	{ 0xFF,			             	NULL },
+};
+
+
+const struct valstr ipmi_set_in_progress_vals[] = {
+	{ IPMI_SET_IN_PROGRESS_SET_COMPLETE, "set-complete"    },
+	{ IPMI_SET_IN_PROGRESS_IN_PROGRESS,  "set-in-progress" },
+	{ IPMI_SET_IN_PROGRESS_COMMIT_WRITE, "commit-write"    },
+	{ 0,                            NULL },
+};
+
+
+const struct valstr ipmi_authtype_session_vals[] = {
+	{ IPMI_SESSION_AUTHTYPE_NONE,     "NONE" },
+	{ IPMI_SESSION_AUTHTYPE_MD2,      "MD2" },
+	{ IPMI_SESSION_AUTHTYPE_MD5,      "MD5" },
+	{ IPMI_SESSION_AUTHTYPE_PASSWORD, "PASSWORD" },
+	{ IPMI_SESSION_AUTHTYPE_OEM,      "OEM" },
+	{ 0xFF,                           NULL },
+};
+
+
+const struct valstr ipmi_authtype_vals[] = {
+	{ IPMI_1_5_AUTH_TYPE_BIT_NONE,     "NONE" },
+	{ IPMI_1_5_AUTH_TYPE_BIT_MD2,      "MD2" },
+	{ IPMI_1_5_AUTH_TYPE_BIT_MD5,      "MD5" },
+	{ IPMI_1_5_AUTH_TYPE_BIT_PASSWORD, "PASSWORD" },
+	{ IPMI_1_5_AUTH_TYPE_BIT_OEM,      "OEM" },
+	{ 0,                               NULL },
+};
+
+const struct valstr entity_id_vals[] = {
+	{ 0x00, "Unspecified" },
+	{ 0x01, "Other" },
+	{ 0x02, "Unknown" },
+	{ 0x03, "Processor" },
+	{ 0x04, "Disk or Disk Bay" },
+	{ 0x05, "Peripheral Bay" },
+	{ 0x06, "System Management Module" },
+	{ 0x07, "System Board" },
+	{ 0x08, "Memory Module" },
+	{ 0x09, "Processor Module" },
+	{ 0x0a, "Power Supply" },
+	{ 0x0b, "Add-in Card" },
+	{ 0x0c, "Front Panel Board" },
+	{ 0x0d, "Back Panel Board" },
+	{ 0x0e, "Power System Board" },
+	{ 0x0f, "Drive Backplane" },
+	{ 0x10, "System Internal Expansion Board" },
+	{ 0x11, "Other System Board" },
+	{ 0x12, "Processor Board" },
+	{ 0x13, "Power Unit" },
+	{ 0x14, "Power Module" },
+	{ 0x15, "Power Management" },
+	{ 0x16, "Chassis Back Panel Board" },
+	{ 0x17, "System Chassis" },
+	{ 0x18, "Sub-Chassis" },
+	{ 0x19, "Other Chassis Board" },
+	{ 0x1a, "Disk Drive Bay" },
+	{ 0x1b, "Peripheral Bay" },
+	{ 0x1c, "Device Bay" },
+	{ 0x1d, "Fan Device" },
+	{ 0x1e, "Cooling Unit" },
+	{ 0x1f, "Cable/Interconnect" },
+	{ 0x20, "Memory Device" },
+	{ 0x21, "System Management Software" },
+	{ 0x22, "BIOS" },
+	{ 0x23, "Operating System" },
+	{ 0x24, "System Bus" },
+	{ 0x25, "Group" },
+	{ 0x26, "Remote Management Device" },
+	{ 0x27, "External Environment" },
+	{ 0x28, "Battery" },
+    { 0x29, "Processing Blade" },
+    { 0x2A, "Connectivity Switch" },
+    { 0x2B, "Processor/Memory Module" },
+    { 0x2C, "I/O Module" },
+    { 0x2D, "Processor/IO Module" },
+    { 0x2E, "Management Controller Firmware" },
+    { 0x2F, "IPMI Channel" },
+    { 0x30, "PCI Bus" },
+    { 0x31, "PCI Express Bus" },
+    { 0x32, "SCSI Bus (parallel)" },
+    { 0x33, "SATA/SAS Bus" },
+    { 0x34, "Processor/Front-Side Bus" },
+	{ 0x00, NULL },
+};
+
+const struct valstr entity_device_type_vals[] = {
+	{ 0x00, "Reserved" },
+	{ 0x01, "Reserved" },
+	{ 0x02, "DS1624 temperature sensor" },
+	{ 0x03, "DS1621 temperature sensor" },
+	{ 0x04, "LM75 Temperature Sensor" },
+	{ 0x05, "Heceta ASIC" },
+	{ 0x06, "Reserved" },
+	{ 0x07, "Reserved" },
+	{ 0x08, "EEPROM, 24C01" },
+	{ 0x09, "EEPROM, 24C02" },
+	{ 0x0a, "EEPROM, 24C04" },
+	{ 0x0b, "EEPROM, 24C08" },
+	{ 0x0c, "EEPROM, 24C16" },
+	{ 0x0d, "EEPROM, 24C17" },
+	{ 0x0e, "EEPROM, 24C32" },
+	{ 0x0f, "EEPROM, 24C64" },
+	{ 0x1000, "IPMI FRU Inventory" },
+	{ 0x1001, "DIMM Memory ID" },
+	{ 0x1002, "IPMI FRU Inventory" },
+	{ 0x1003, "System Processor Cartridge FRU" },
+	{ 0x11, "Reserved" },
+	{ 0x12, "Reserved" },
+	{ 0x13, "Reserved" },
+	{ 0x14, "PCF 8570 256 byte RAM" },
+	{ 0x15, "PCF 8573 clock/calendar" },
+	{ 0x16, "PCF 8574A I/O Port" },
+	{ 0x17, "PCF 8583 clock/calendar" },
+	{ 0x18, "PCF 8593 clock/calendar" },
+	{ 0x19, "Clock calendar" },
+	{ 0x1a, "PCF 8591 A/D, D/A Converter" },
+	{ 0x1b, "I/O Port" },
+	{ 0x1c, "A/D Converter" },
+	{ 0x1d, "D/A Converter" },
+	{ 0x1e, "A/D, D/A Converter" },
+	{ 0x1f, "LCD Controller/Driver" },
+	{ 0x20, "Core Logic (Chip set) Device" },
+	{ 0x21, "LMC6874 Intelligent Battery controller" },
+	{ 0x22, "Intelligent Batter controller" },
+	{ 0x23, "Combo Management ASIC" },
+	{ 0x24, "Maxim 1617 Temperature Sensor" },
+	{ 0xbf, "Other/Unspecified" },
+	{ 0x00, NULL },
+};
+
+const struct valstr ipmi_channel_protocol_vals[] = {
+	{ 0x00, "reserved" },
+	{ 0x01, "IPMB-1.0" },
+	{ 0x02, "ICMB-1.0" },
+	{ 0x03, "reserved" },
+	{ 0x04, "IPMI-SMBus" },
+	{ 0x05, "KCS" },
+	{ 0x06, "SMIC" },
+	{ 0x07, "BT-10" },
+	{ 0x08, "BT-15" },
+	{ 0x09, "TMode" },
+	{ 0x1c, "OEM 1" },
+	{ 0x1d, "OEM 2" },
+	{ 0x1e, "OEM 3" },
+	{ 0x1f, "OEM 4" },
+	{ 0x00, NULL },
+};
+
+
+const struct valstr ipmi_channel_medium_vals[] = {
+	{ IPMI_CHANNEL_MEDIUM_RESERVED,	"reserved" },
+	{ IPMI_CHANNEL_MEDIUM_IPMB_I2C,	"IPMB (I2C)" },
+	{ IPMI_CHANNEL_MEDIUM_ICMB_1,	"ICMB v1.0" },
+	{ IPMI_CHANNEL_MEDIUM_ICMB_09,	"ICMB v0.9" },
+	{ IPMI_CHANNEL_MEDIUM_LAN,	"802.3 LAN" },
+	{ IPMI_CHANNEL_MEDIUM_SERIAL,	"Serial/Modem" },
+	{ IPMI_CHANNEL_MEDIUM_LAN_OTHER,"Other LAN" },
+	{ IPMI_CHANNEL_MEDIUM_SMBUS_PCI,"PCI SMBus" },
+	{ IPMI_CHANNEL_MEDIUM_SMBUS_1,	"SMBus v1.0/v1.1" },
+	{ IPMI_CHANNEL_MEDIUM_SMBUS_2,	"SMBus v2.0" },
+	{ IPMI_CHANNEL_MEDIUM_USB_1,	"USB 1.x" },
+	{ IPMI_CHANNEL_MEDIUM_USB_2,	"USB 2.x" },
+	{ IPMI_CHANNEL_MEDIUM_SYSTEM,	"System Interface" },
+	{ 0x00, NULL },
+};
+
+const struct valstr completion_code_vals[] = {
+	{ 0x00, "Command completed normally" },
+	{ 0xc0, "Node busy" },
+	{ 0xc1, "Invalid command" },
+	{ 0xc2, "Invalid command on LUN" },
+	{ 0xc3, "Timeout" },
+	{ 0xc4, "Out of space" },
+	{ 0xc5, "Reservation cancelled or invalid" },
+	{ 0xc6, "Request data truncated" },
+	{ 0xc7, "Request data length invalid" },
+	{ 0xc8, "Request data field length limit exceeded" },
+	{ 0xc9, "Parameter out of range" },
+	{ 0xca, "Cannot return number of requested data bytes" },
+	{ 0xcb, "Requested sensor, data, or record not found" },
+	{ 0xcc, "Invalid data field in request" },
+	{ 0xcd, "Command illegal for specified sensor or record type" },
+	{ 0xce, "Command response could not be provided" },
+	{ 0xcf, "Cannot execute duplicated request" },
+	{ 0xd0, "SDR Repository in update mode" },
+	{ 0xd1, "Device firmeware in update mode" },
+	{ 0xd2, "BMC initialization in progress" },
+	{ 0xd3, "Destination unavailable" },
+	{ 0xd4, "Insufficient privilege level" },
+	{ 0xd5, "Command not supported in present state" },
+	{ 0xff, "Unspecified error" },
+	{ 0x00, NULL }
+};
+
+const struct valstr ipmi_chassis_power_control_vals[] = {
+	{ IPMI_CHASSIS_CTL_POWER_DOWN,   "Down/Off" },
+	{ IPMI_CHASSIS_CTL_POWER_UP,     "Up/On" },
+	{ IPMI_CHASSIS_CTL_POWER_CYCLE,  "Cycle" },
+	{ IPMI_CHASSIS_CTL_HARD_RESET,   "Reset" },
+	{ IPMI_CHASSIS_CTL_PULSE_DIAG,   "Diag" },
+	{ IPMI_CHASSIS_CTL_ACPI_SOFT,    "Soft" },
+	{ 0x00, NULL },
+};
+
+const struct valstr ipmi_auth_algorithms[] = {
+	{ IPMI_AUTH_RAKP_NONE,      "none"      },
+	{ IPMI_AUTH_RAKP_HMAC_SHA1, "hmac_sha1" },
+	{ IPMI_AUTH_RAKP_HMAC_MD5,  "hmac_md5"  },
+	{ 0x00, NULL }
+};
+
+const struct valstr ipmi_integrity_algorithms[] = {
+	{ IPMI_INTEGRITY_NONE,         "none" },
+	{ IPMI_INTEGRITY_HMAC_SHA1_96, "hmac_sha1_96" },
+	{ IPMI_INTEGRITY_HMAC_MD5_128, "hmac_md5_128" },
+	{ IPMI_INTEGRITY_MD5_128 ,     "md5_128"      },
+	{ 0x00, NULL }
+};
+
+const struct valstr ipmi_encryption_algorithms[] = {
+	{ IPMI_CRYPT_NONE,        "none"        },
+	{ IPMI_CRYPT_AES_CBC_128, "aes_cbc_128" },
+	{ IPMI_CRYPT_XRC4_128,    "xrc4_128"    },
+	{ IPMI_CRYPT_XRC4_40,     "xrc4_40"     },
+	{ 0x00, NULL }
+};

ipmitool/lib/ipmi_sunoem.c

@@ -0,0 +1,847 @@
+/*
+ * Copyright (c) 2005 Sun Microsystems, Inc.  All Rights Reserved.
+ * 
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 
+ * Redistribution of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 
+ * Redistribution in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * 
+ * Neither the name of Sun Microsystems, Inc. or the names of
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ * 
+ * This software is provided "AS IS," without a warranty of any kind.
+ * ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND WARRANTIES,
+ * INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A
+ * PARTICULAR PURPOSE OR NON-INFRINGEMENT, ARE HEREBY EXCLUDED.
+ * SUN MICROSYSTEMS, INC. ("SUN") AND ITS LICENSORS SHALL NOT BE LIABLE
+ * FOR ANY DAMAGES SUFFERED BY LICENSEE AS A RESULT OF USING, MODIFYING
+ * OR DISTRIBUTING THIS SOFTWARE OR ITS DERIVATIVES.  IN NO EVENT WILL
+ * SUN OR ITS LICENSORS BE LIABLE FOR ANY LOST REVENUE, PROFIT OR DATA,
+ * OR FOR DIRECT, INDIRECT, SPECIAL, CONSEQUENTIAL, INCIDENTAL OR
+ * PUNITIVE DAMAGES, HOWEVER CAUSED AND REGARDLESS OF THE THEORY OF
+ * LIABILITY, ARISING OUT OF THE USE OF OR INABILITY TO USE THIS SOFTWARE,
+ * EVEN IF SUN HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
+ */
+
+#include <stdlib.h>
+#include <stdio.h>
+#include <string.h>
+#include <sys/types.h>
+#include <sys/socket.h>
+#include <netinet/in.h>
+#include <arpa/inet.h>
+#include <errno.h>
+#include <unistd.h>
+#include <signal.h>
+#include <ctype.h>
+
+#include <ipmitool/ipmi.h>
+#include <ipmitool/ipmi_intf.h>
+#include <ipmitool/helper.h>
+#include <ipmitool/log.h>
+#include <ipmitool/ipmi_sel.h>
+#include <ipmitool/ipmi_sdr.h>
+#include <ipmitool/ipmi_strings.h>
+#include <ipmitool/ipmi_channel.h>
+#include <ipmitool/ipmi_sunoem.h>
+#include <ipmitool/ipmi_raw.h>
+
+static const struct valstr sunoem_led_type_vals[] = {
+	{ 0, "OK2RM" },
+	{ 1, "SERVICE" },
+	{ 2, "ACT" },
+	{ 3, "LOCATE" },
+	{ 0xFF, NULL },
+};
+
+static const struct valstr sunoem_led_mode_vals[] = {
+	{ 0, "OFF" },
+	{ 1, "ON" },
+	{ 2, "STANDBY" },
+	{ 3, "SLOW" },
+	{ 4, "FAST" },
+	{ 0xFF, NULL },
+};
+static const struct valstr sunoem_led_mode_optvals[] = {
+	{ 0, "STEADY_OFF" },
+	{ 1, "STEADY_ON" },
+	{ 2, "STANDBY_BLINK" },
+	{ 3, "SLOW_BLINK" },
+	{ 4, "FAST_BLINK" },
+	{ 0xFF, NULL },
+};
+
+int is_sbcmd = 0;
+
+static void
+ipmi_sunoem_usage(void)
+{
+	lprintf(LOG_NOTICE, "usage: sunoem <command> [option...]");
+	lprintf(LOG_NOTICE, "");
+	lprintf(LOG_NOTICE, "   fan speed <0-100>");
+	lprintf(LOG_NOTICE, "      Set system fan speed (PWM duty cycle)");
+	lprintf(LOG_NOTICE, "");
+	lprintf(LOG_NOTICE, "   sshkey set <userid> <id_rsa.pub>");
+	lprintf(LOG_NOTICE, "      Set ssh key for a userid into authorized_keys,");
+	lprintf(LOG_NOTICE, "      view users with 'user list' command.");
+	lprintf(LOG_NOTICE, "");
+	lprintf(LOG_NOTICE, "   sshkey del <userid>");
+	lprintf(LOG_NOTICE, "      Delete ssh key for userid from authorized_keys,");
+	lprintf(LOG_NOTICE, "      view users with 'user list' command.");
+	lprintf(LOG_NOTICE, "");
+	lprintf(LOG_NOTICE, "   led get <sensorid> [ledtype]");
+	lprintf(LOG_NOTICE, "      Read status of LED found in Generic Device Locator.");
+	lprintf(LOG_NOTICE, "");
+	lprintf(LOG_NOTICE, "   led set <sensorid> <ledmode> [ledtype]");
+	lprintf(LOG_NOTICE, "      Set mode of LED found in Generic Device Locator.");
+	lprintf(LOG_NOTICE, "");
+	lprintf(LOG_NOTICE, "   sbled get <sensorid> [ledtype]");
+	lprintf(LOG_NOTICE, "      Read status of LED found in Generic Device Locator");
+	lprintf(LOG_NOTICE, "      for Sun Blade Modular Systems.");
+	lprintf(LOG_NOTICE, "");
+	lprintf(LOG_NOTICE, "   sbled set <sensorid> <ledmode> [ledtype]");
+	lprintf(LOG_NOTICE, "      Set mode of LED found in Generic Device Locator");
+	lprintf(LOG_NOTICE, "      for Sun Blade Modular Systems.");
+	lprintf(LOG_NOTICE, "");
+	lprintf(LOG_NOTICE, "      Use 'sdr list generic' command to get list of Generic");
+	lprintf(LOG_NOTICE, "      Devices that are controllable LEDs.");
+	lprintf(LOG_NOTICE, "");
+	lprintf(LOG_NOTICE, "      Required SIS LED Mode:");
+	lprintf(LOG_NOTICE, "         OFF          Off");
+	lprintf(LOG_NOTICE, "         ON           Steady On");
+	lprintf(LOG_NOTICE, "         STANDBY      100ms on 2900ms off blink rate");
+	lprintf(LOG_NOTICE, "         SLOW         1HZ blink rate");
+	lprintf(LOG_NOTICE, "         FAST         4HZ blink rate");
+	lprintf(LOG_NOTICE, "");
+	lprintf(LOG_NOTICE, "      Optional SIS LED Type:");
+	lprintf(LOG_NOTICE, "         OK2RM        OK to Remove");
+	lprintf(LOG_NOTICE, "         SERVICE      Service Required");
+	lprintf(LOG_NOTICE, "         ACT          Activity");
+	lprintf(LOG_NOTICE, "         LOCATE       Locate");
+	lprintf(LOG_NOTICE, "");
+}
+
+/* 
+ * IPMI Request Data: 1 byte
+ *
+ * [byte 0]  FanSpeed    Fan speed as percentage
+ */
+static int
+ipmi_sunoem_fan_speed(struct ipmi_intf * intf, uint8_t speed)
+{
+	struct ipmi_rs * rsp;
+	struct ipmi_rq req;
+
+	/* 
+	 * sunoem fan speed <percent>
+	 */
+
+	if (speed > 100) {
+		lprintf(LOG_NOTICE, "Invalid fan speed: %d", speed);
+		return -1;
+	}
+
+	req.msg.netfn = IPMI_NETFN_SUNOEM;
+	req.msg.cmd = IPMI_SUNOEM_SET_FAN_SPEED;
+	req.msg.data = &speed;
+	req.msg.data_len = 1;
+		
+	rsp = intf->sendrecv(intf, &req);
+	if (rsp == NULL) {
+		lprintf(LOG_ERR, "Sun OEM Set Fan Speed command failed");
+		return -1;
+	}
+	else if (rsp->ccode > 0) {
+		lprintf(LOG_ERR, "Sun OEM Set Fan Speed command failed: %s",
+			val2str(rsp->ccode, completion_code_vals));
+		return -1;
+	}
+
+	printf("Set Fan speed to %d%%\n", speed);
+
+	return 0;
+}
+
+static void
+__sdr_list_empty(struct sdr_record_list * head)
+{
+	struct sdr_record_list * e, * f;
+	for (e = head; e != NULL; e = f) {
+		f = e->next;
+		free(e);
+	}
+	head = NULL;
+}
+
+static void
+led_print(const char * name, uint8_t state)
+{
+	if (csv_output)
+		printf("%s,%s\n", name, val2str(state, sunoem_led_mode_vals));
+	else
+		printf("%-16s | %s\n", name, val2str(state, sunoem_led_mode_vals));
+}
+
+struct ipmi_rs *
+sunoem_led_get(struct ipmi_intf * intf,
+		 struct sdr_record_generic_locator * dev,
+		 int ledtype)
+{
+	struct ipmi_rs * rsp;
+	struct ipmi_rq req;
+	uint8_t rqdata[7];
+	int rqdata_len = 5;
+
+	if (dev == NULL)
+		return NULL;
+
+	rqdata[0] = dev->dev_slave_addr;
+	if (ledtype == 0xFF)
+		rqdata[1] = dev->oem;
+	else
+		rqdata[1] = ledtype;
+	rqdata[2] = dev->dev_access_addr;
+	rqdata[3] = dev->oem;
+	if (is_sbcmd) {
+		rqdata[4] = dev->entity.id;
+		rqdata[5] = dev->entity.instance;
+		rqdata[6] = 0;
+		rqdata_len = 7;
+	}
+	else {
+		rqdata[4] = 0;
+	}
+
+	req.msg.netfn = IPMI_NETFN_SUNOEM;
+	req.msg.cmd = IPMI_SUNOEM_LED_GET;
+	req.msg.data = rqdata;
+	req.msg.data_len = rqdata_len;
+		
+	rsp = intf->sendrecv(intf, &req);
+	if (rsp == NULL) {
+		lprintf(LOG_ERR, "Sun OEM Get LED command failed");
+		return NULL;
+	}
+	else if (rsp->ccode > 0) {
+		lprintf(LOG_ERR, "Sun OEM Get LED command failed: %s",
+			val2str(rsp->ccode, completion_code_vals));
+		return NULL;
+	}
+
+	return rsp;
+}
+
+struct ipmi_rs *
+sunoem_led_set(struct ipmi_intf * intf,
+		 struct sdr_record_generic_locator * dev,
+		 int ledtype, int ledmode)
+{
+	struct ipmi_rs * rsp;
+	struct ipmi_rq req;
+	uint8_t rqdata[9];
+	int rqdata_len = 7;
+
+	if (dev == NULL)
+		return NULL;
+
+	rqdata[0] = dev->dev_slave_addr;
+	if (ledtype == 0xFF)
+		rqdata[1] = dev->oem;
+	else
+		rqdata[1] = ledtype;
+	rqdata[2] = dev->dev_access_addr;
+	rqdata[3] = dev->oem;
+	rqdata[4] = ledmode;
+	if (is_sbcmd) {
+		rqdata[5] = dev->entity.id;
+		rqdata[6] = dev->entity.instance;
+		rqdata[7] = 0;
+		rqdata[8] = 0;
+		rqdata_len = 9;
+	}
+	else {
+		rqdata[5] = 0;
+		rqdata[6] = 0;
+	}
+
+	req.msg.netfn = IPMI_NETFN_SUNOEM;
+	req.msg.cmd = IPMI_SUNOEM_LED_SET;
+	req.msg.data = rqdata;
+	req.msg.data_len = rqdata_len;
+		
+	rsp = intf->sendrecv(intf, &req);
+	if (rsp == NULL) {
+		lprintf(LOG_ERR, "Sun OEM Set LED command failed");
+		return NULL;
+	}
+	else if (rsp->ccode > 0) {
+		lprintf(LOG_ERR, "Sun OEM Set LED command failed: %s",
+			val2str(rsp->ccode, completion_code_vals));
+		return NULL;
+	}
+
+	return rsp;
+}
+
+static void
+sunoem_led_get_byentity(struct ipmi_intf * intf, uint8_t entity_id,
+			  uint8_t entity_inst, int ledtype)
+{
+	struct ipmi_rs * rsp;
+	struct sdr_record_list *elist, *e;
+	struct entity_id entity;
+
+	if (entity_id == 0)
+		return;
+
+	/* lookup sdrs with this entity */
+	memset(&entity, 0, sizeof(struct entity_id));
+	entity.id = entity_id;
+	entity.instance = entity_inst;
+
+	elist = ipmi_sdr_find_sdr_byentity(intf, &entity);
+
+	/* for each generic sensor set its led state */
+	for (e = elist; e != NULL; e = e->next) {
+		if (e->type != SDR_RECORD_TYPE_GENERIC_DEVICE_LOCATOR)
+			continue;
+		rsp = sunoem_led_get(intf, e->record.genloc, ledtype);
+		if (rsp && rsp->data_len == 1) {
+			led_print((const char *)e->record.genloc->id_string, rsp->data[0]);
+		}
+	}
+
+	__sdr_list_empty(elist);
+}
+
+static void
+sunoem_led_set_byentity(struct ipmi_intf * intf, uint8_t entity_id,
+			  uint8_t entity_inst, int ledtype, int ledmode)
+{
+	struct ipmi_rs * rsp;
+	struct sdr_record_list *elist, *e;
+	struct entity_id entity;
+
+	if (entity_id == 0)
+		return;
+
+	/* lookup sdrs with this entity */
+	memset(&entity, 0, sizeof(struct entity_id));
+	entity.id = entity_id;
+	entity.instance = entity_inst;
+
+	elist = ipmi_sdr_find_sdr_byentity(intf, &entity);
+
+	/* for each generic sensor set its led state */
+	for (e = elist; e != NULL; e = e->next) {
+		if (e->type != SDR_RECORD_TYPE_GENERIC_DEVICE_LOCATOR)
+			continue;
+		rsp = sunoem_led_set(intf, e->record.genloc, ledtype, ledmode);
+		if (rsp && rsp->data_len == 0) {
+			led_print((const char *)e->record.genloc->id_string, ledmode);
+		}
+	}
+
+	__sdr_list_empty(elist);
+}
+
+/* 
+ * IPMI Request Data: 5 bytes
+ *
+ * [byte 0]  devAddr     Value from the "Device Slave Address" field in
+ *                       LED's Generic Device Locator record in the SDR
+ * [byte 1]  led         LED Type: OK2RM, ACT, LOCATE, SERVICE
+ * [byte 2]  ctrlrAddr   Controller address; value from the "Device
+ *                       Access Address" field, 0x20 if the LED is local
+ * [byte 3]  hwInfo      The OEM field from the SDR record
+ * [byte 4]  force       1 = directly access the device
+ *                       0 = go thru its controller
+ *                       Ignored if LED is local
+ * 
+ * The format below is for Sun Blade Modular systems only
+ * [byte 4]  entityID    The entityID field from the SDR record
+ * [byte 5]  entityIns   The entityIns field from the SDR record
+ * [byte 6]  force       1 = directly access the device
+ *                       0 = go thru its controller
+ *                       Ignored if LED is local
+ */
+static int
+ipmi_sunoem_led_get(struct ipmi_intf * intf,  int argc, char ** argv)
+{
+	struct ipmi_rs * rsp;
+	struct sdr_record_list *sdr;
+	struct sdr_record_list *alist, *a;
+	struct sdr_record_entity_assoc *assoc;
+	int ledtype = 0xFF;
+	int i;
+
+	/* 
+	 * sunoem led/sbled get <id> [type]
+	 */
+
+	if (argc < 1 || strncmp(argv[0], "help", 4) == 0) {
+		ipmi_sunoem_usage();
+		return 0;
+	}
+
+	if (argc > 1) {
+		ledtype = str2val(argv[1], sunoem_led_type_vals);
+		if (ledtype == 0xFF) 
+			lprintf(LOG_ERR, "Unknow ledtype, will use data from the SDR oem field");
+	}
+
+	if (strncasecmp(argv[0], "all", 3) == 0) {
+		/* do all generic sensors */
+		alist = ipmi_sdr_find_sdr_bytype(intf, SDR_RECORD_TYPE_GENERIC_DEVICE_LOCATOR);
+		for (a = alist; a != NULL; a = a->next) {
+			if (a->type != SDR_RECORD_TYPE_GENERIC_DEVICE_LOCATOR)
+				continue;
+			if (a->record.genloc->entity.logical)
+				continue;
+			rsp = sunoem_led_get(intf, a->record.genloc, ledtype);
+			if (rsp && rsp->data_len == 1) {
+				led_print((const char *)a->record.genloc->id_string, rsp->data[0]);
+			}
+		}
+		__sdr_list_empty(alist);
+		return 0;
+	}
+
+	/* look up generic device locator record in SDR */
+	sdr = ipmi_sdr_find_sdr_byid(intf, argv[0]);
+
+	if (sdr == NULL) {
+		lprintf(LOG_ERR, "No Sensor Data Record found for %s", argv[0]);
+		return -1;
+	}
+
+	if (sdr->type != SDR_RECORD_TYPE_GENERIC_DEVICE_LOCATOR) {
+		lprintf(LOG_ERR, "Invalid SDR type %d", sdr->type);
+		return -1;
+	}
+
+	if (!sdr->record.genloc->entity.logical) {
+		/*
+		 * handle physical entity
+		 */
+		rsp = sunoem_led_get(intf, sdr->record.genloc, ledtype);
+		if (rsp && rsp->data_len == 1) {
+			led_print((const char *)sdr->record.genloc->id_string, rsp->data[0]);
+		}
+		return 0;
+	}
+
+	/* 
+	 * handle logical entity for LED grouping
+	 */
+
+	lprintf(LOG_INFO, "LED %s is logical device", argv[0]);
+
+	/* get entity assoc records */
+	alist = ipmi_sdr_find_sdr_bytype(intf, SDR_RECORD_TYPE_ENTITY_ASSOC);
+	for (a = alist; a != NULL; a = a->next) {
+		if (a->type != SDR_RECORD_TYPE_ENTITY_ASSOC)
+			continue;
+		assoc = a->record.entassoc;
+		if (assoc == NULL)
+			continue;
+
+		/* check that the entity id/instance matches our generic record */
+		if (assoc->entity.id != sdr->record.genloc->entity.id ||
+		    assoc->entity.instance != sdr->record.genloc->entity.instance)
+			continue;
+
+		if (assoc->flags.isrange) {
+			/*
+			 * handle ranged entity associations
+			 *
+			 * the test for non-zero entity id is handled in
+			 * sunoem_led_get_byentity()
+			 */
+
+			/* first range set - id 1 and 2 must be equal */
+			if (assoc->entity_id_1 == assoc->entity_id_2)
+				for (i = assoc->entity_inst_1; i <= assoc->entity_inst_2; i++)
+					sunoem_led_get_byentity(intf, assoc->entity_id_1, i, ledtype);
+
+			/* second range set - id 3 and 4 must be equal */
+			if (assoc->entity_id_3 == assoc->entity_id_4)
+				for (i = assoc->entity_inst_3; i <= assoc->entity_inst_4; i++)
+					sunoem_led_get_byentity(intf, assoc->entity_id_3, i, ledtype);
+		}
+		else {
+			/*
+			 * handle entity list
+			 */
+			sunoem_led_get_byentity(intf, assoc->entity_id_1,
+						assoc->entity_inst_1, ledtype);
+			sunoem_led_get_byentity(intf, assoc->entity_id_2,
+						assoc->entity_inst_2, ledtype);
+			sunoem_led_get_byentity(intf, assoc->entity_id_3,
+						assoc->entity_inst_3, ledtype);
+			sunoem_led_get_byentity(intf, assoc->entity_id_4,
+						assoc->entity_inst_4, ledtype);
+		}
+	}
+
+	__sdr_list_empty(alist);
+
+	return 0;
+}
+
+/* 
+ * IPMI Request Data: 7 bytes
+ *
+ * [byte 0]  devAddr     Value from the "Device Slave Address" field in
+ *                       LED's Generic Device Locator record in the SDR
+ * [byte 1]  led         LED Type: OK2RM, ACT, LOCATE, SERVICE
+ * [byte 2]  ctrlrAddr   Controller address; value from the "Device
+ *                       Access Address" field, 0x20 if the LED is local
+ * [byte 3]  hwInfo      The OEM field from the SDR record
+ * [byte 4]  mode        LED Mode: OFF, ON, STANDBY, SLOW, FAST
+ * [byte 5]  force       TRUE - directly access the device
+ *                       FALSE - go thru its controller
+ *                       Ignored if LED is local
+ * [byte 6]  role        Used by BMC for authorization purposes
+ *
+ * The format below is for Sun Blade Modular systems only
+ * [byte 5]  entityID    The entityID field from the SDR record
+ * [byte 6]  entityIns   The entityIns field from the SDR record
+ * [byte 7]  force       TRUE - directly access the device
+ *                       FALSE - go thru its controller
+ *                       Ignored if LED is local
+ * [byte 8]  role        Used by BMC for authorization purposes
+ *
+ *
+ * IPMI Response Data: 1 byte
+ * 
+ * [byte 0]  mode     LED Mode: OFF, ON, STANDBY, SLOW, FAST
+ */
+
+static int
+ipmi_sunoem_led_set(struct ipmi_intf * intf,  int argc, char ** argv)
+{
+	struct ipmi_rs * rsp;
+	struct sdr_record_list *sdr;
+	struct sdr_record_list *alist, *a;
+	struct sdr_record_entity_assoc *assoc;
+	int ledmode;
+	int ledtype = 0xFF;
+	int i;
+
+	/* 
+	 * sunoem led/sbled set <id> <mode> [type]
+	 */
+
+	if (argc < 2 || strncmp(argv[0], "help", 4) == 0) {
+		ipmi_sunoem_usage();
+		return 0;
+	}
+
+	ledmode = str2val(argv[1], sunoem_led_mode_vals);
+	if (ledmode == 0xFF) {
+		ledmode = str2val(argv[1], sunoem_led_mode_optvals);
+		if (ledmode == 0xFF) {
+			lprintf(LOG_NOTICE, "Invalid LED Mode: %s", argv[1]);
+			return -1;
+		}
+	}
+
+	if (argc > 3) {
+		ledtype = str2val(argv[2], sunoem_led_type_vals);
+		if (ledtype == 0xFF) 
+			lprintf(LOG_ERR, "Unknow ledtype, will use data from the SDR oem field");
+	}
+
+	if (strncasecmp(argv[0], "all", 3) == 0) {
+		/* do all generic sensors */
+		alist = ipmi_sdr_find_sdr_bytype(intf, SDR_RECORD_TYPE_GENERIC_DEVICE_LOCATOR);
+		for (a = alist; a != NULL; a = a->next) {
+			if (a->type != SDR_RECORD_TYPE_GENERIC_DEVICE_LOCATOR)
+				continue;
+			if (a->record.genloc->entity.logical)
+				continue;
+			rsp = sunoem_led_set(intf, a->record.genloc, ledtype, ledmode);
+			if (rsp && rsp->ccode == 0) {
+				led_print((const char *)a->record.genloc->id_string, ledmode);
+			}
+		}
+		__sdr_list_empty(alist);
+		return 0;
+	}
+
+	/* look up generic device locator records in SDR */
+	sdr = ipmi_sdr_find_sdr_byid(intf, argv[0]);
+
+	if (sdr == NULL) {
+		lprintf(LOG_ERR, "No Sensor Data Record found for %s",
+			argv[0]);
+		return -1;
+	}
+
+	if (sdr->type != SDR_RECORD_TYPE_GENERIC_DEVICE_LOCATOR) {
+		lprintf(LOG_ERR, "Invalid SDR type %d", sdr->type);
+		return -1;
+	}
+
+	if (!sdr->record.genloc->entity.logical) {
+		/*
+		 * handle physical entity
+		 */
+		rsp = sunoem_led_set(intf, sdr->record.genloc, ledtype, ledmode);
+		if (rsp && rsp->ccode == 0) {
+			led_print(argv[0], ledmode);
+		}
+		return 0;
+	}
+
+	/* 
+	 * handle logical entity for LED grouping
+	 */
+
+	lprintf(LOG_INFO, "LED %s is logical device", argv[0]);
+
+	/* get entity assoc records */
+	alist = ipmi_sdr_find_sdr_bytype(intf, SDR_RECORD_TYPE_ENTITY_ASSOC);
+	for (a = alist; a != NULL; a = a->next) {
+		if (a->type != SDR_RECORD_TYPE_ENTITY_ASSOC)
+			continue;
+		assoc = a->record.entassoc;
+		if (assoc == NULL)
+			continue;
+
+		/* check that the entity id/instance matches our generic record */
+		if (assoc->entity.id != sdr->record.genloc->entity.id ||
+		    assoc->entity.instance != sdr->record.genloc->entity.instance)
+			continue;
+
+		if (assoc->flags.isrange) {
+			/*
+			 * handle ranged entity associations
+			 *
+			 * the test for non-zero entity id is handled in
+			 * sunoem_led_get_byentity()
+			 */
+
+			/* first range set - id 1 and 2 must be equal */
+			if (assoc->entity_id_1 == assoc->entity_id_2)
+				for (i = assoc->entity_inst_1; i <= assoc->entity_inst_2; i++)
+					sunoem_led_set_byentity(intf, assoc->entity_id_1, i, ledtype, ledmode);
+
+			/* second range set - id 3 and 4 must be equal */
+			if (assoc->entity_id_3 == assoc->entity_id_4)
+				for (i = assoc->entity_inst_3; i <= assoc->entity_inst_4; i++)
+					sunoem_led_set_byentity(intf, assoc->entity_id_3, i, ledtype, ledmode);
+		}
+		else {
+			/*
+			 * handle entity list
+			 */
+			sunoem_led_set_byentity(intf, assoc->entity_id_1,
+						assoc->entity_inst_1, ledtype, ledmode);
+			sunoem_led_set_byentity(intf, assoc->entity_id_2,
+						assoc->entity_inst_2, ledtype, ledmode);
+			sunoem_led_set_byentity(intf, assoc->entity_id_3,
+						assoc->entity_inst_3, ledtype, ledmode);
+			sunoem_led_set_byentity(intf, assoc->entity_id_4,
+						assoc->entity_inst_4, ledtype, ledmode);
+		}
+	}
+
+	__sdr_list_empty(alist);
+
+	return 0;
+}
+
+static int
+ipmi_sunoem_sshkey_del(struct ipmi_intf * intf, uint8_t uid)
+{
+	struct ipmi_rs * rsp;
+	struct ipmi_rq req;
+
+	memset(&req, 0, sizeof(struct ipmi_rq));
+	req.msg.netfn = IPMI_NETFN_SUNOEM;
+	req.msg.cmd = IPMI_SUNOEM_DEL_SSH_KEY;
+	req.msg.data = &uid;
+	req.msg.data_len = 1;
+
+	rsp = intf->sendrecv(intf, &req);
+	if (rsp == NULL) {
+		lprintf(LOG_ERR, "Unable to delete ssh key for UID %d", uid);
+		return -1;
+	}
+	else if (rsp->ccode > 0) {
+		lprintf(LOG_ERR, "Unable to delete ssh key for UID %d: %s", uid,
+			val2str(rsp->ccode, completion_code_vals));
+		return -1;
+	}
+
+	printf("Deleted SSH key for user id %d\n", uid);
+	return 0;
+}
+
+#define SSHKEY_BLOCK_SIZE	64
+static int
+ipmi_sunoem_sshkey_set(struct ipmi_intf * intf, uint8_t uid, char * ifile)
+{
+	struct ipmi_rs * rsp;
+	struct ipmi_rq req;
+	FILE * fp;
+	int count;
+	uint16_t i_size, r, size;
+	uint8_t wbuf[SSHKEY_BLOCK_SIZE + 3];
+
+	if (ifile == NULL) {
+		lprintf(LOG_ERR, "Invalid or misisng input filename");
+		return -1;
+	}
+
+	fp = ipmi_open_file_read(ifile);
+	if (fp == NULL) {
+		lprintf(LOG_ERR, "Unable to open file %s for reading", ifile);
+		return -1;
+	}
+
+	printf("Setting SSH key for user id %d...", uid);
+
+	memset(&req, 0, sizeof(struct ipmi_rq));
+	req.msg.netfn = IPMI_NETFN_SUNOEM;
+	req.msg.cmd = IPMI_SUNOEM_SET_SSH_KEY;
+	req.msg.data = wbuf;
+
+	fseek(fp, 0, SEEK_END);
+	size = ftell(fp);
+	fseek(fp, 0, SEEK_SET);
+
+	for (r = 0; r < size; r += i_size) {
+		i_size = size - r;
+		if (i_size > SSHKEY_BLOCK_SIZE)
+			i_size = SSHKEY_BLOCK_SIZE;
+
+		memset(wbuf, 0, SSHKEY_BLOCK_SIZE);
+		fseek(fp, r, SEEK_SET);
+		count = fread(wbuf+3, 1, i_size, fp);
+		if (count != i_size) {
+			lprintf(LOG_ERR, "Unable to read %d bytes from file %s", i_size, ifile);
+			fclose(fp);
+			return -1;
+		}
+
+		printf(".");
+		fflush(stdout);
+
+		wbuf[0] = uid;
+		if ((r + SSHKEY_BLOCK_SIZE) >= size)
+			wbuf[1] = 0xff;
+		else
+			wbuf[1] = (uint8_t)(r / SSHKEY_BLOCK_SIZE);
+		wbuf[2] = i_size;
+		req.msg.data_len = i_size + 3;
+
+		rsp = intf->sendrecv(intf, &req);
+		if (rsp == NULL) {
+			lprintf(LOG_ERR, "Unable to set ssh key for UID %d", uid);
+			break;
+		}
+	}
+
+	printf("done\n");
+
+	fclose(fp);
+	return 0;
+}
+
+
+int
+ipmi_sunoem_main(struct ipmi_intf * intf, int argc, char ** argv)
+{
+	int rc = 0;
+
+	if (argc == 0 || strncmp(argv[0], "help", 4) == 0) {
+		ipmi_sunoem_usage();
+		return 0;
+	}
+
+	if (strncmp(argv[0], "fan", 3) == 0) {
+		uint8_t pct;
+		if (argc < 2) {
+			ipmi_sunoem_usage();
+			return -1;
+		}
+		else if (strncmp(argv[1], "speed", 5) == 0) {
+			if (argc < 3) {
+				ipmi_sunoem_usage();
+				return -1;
+			}
+			pct = (uint8_t)strtol(argv[2], NULL, 0);
+			rc = ipmi_sunoem_fan_speed(intf, pct);
+		}
+		else {
+			ipmi_sunoem_usage();
+			return -1;
+		}
+	}
+
+	if ((strncmp(argv[0], "led", 3) == 0) || (strncmp(argv[0], "sbled", 5) == 0)) {
+		if (argc < 2) {
+			ipmi_sunoem_usage();
+			return -1;
+		}
+		if (strncmp(argv[0], "sbled", 5) == 0) {
+			is_sbcmd = 1;
+		}
+		if (strncmp(argv[1], "get", 3) == 0) {
+			if (argc < 3) {
+				char * arg[] = { "all" };
+				rc = ipmi_sunoem_led_get(intf, 1, arg);
+			} else {
+				rc = ipmi_sunoem_led_get(intf, argc-2, &(argv[2]));
+			}
+		}
+		else if (strncmp(argv[1], "set", 3) == 0) {
+			if (argc < 4) {
+				ipmi_sunoem_usage();
+				return -1;
+			}
+			rc = ipmi_sunoem_led_set(intf, argc-2, &(argv[2]));
+		}
+		else {
+			ipmi_sunoem_usage();
+			return -1;
+		}
+	}
+
+	if (strncmp(argv[0], "sshkey", 6) == 0) {
+		if (argc < 2) {
+			ipmi_sunoem_usage();
+			return -1;
+		}
+		else if (strncmp(argv[1], "del", 3) == 0) {
+			uint8_t uid;
+			if (argc < 3) {
+				ipmi_sunoem_usage();
+				return -1;
+			}
+			uid = (uint8_t)strtoul(argv[2], NULL, 0);
+			rc = ipmi_sunoem_sshkey_del(intf, uid);
+		}
+		else if (strncmp(argv[1], "set", 3) == 0) {
+			uint8_t uid;
+			if (argc < 4) {
+				ipmi_sunoem_usage();
+				return -1;
+			}
+			uid = (uint8_t)strtoul(argv[2], NULL, 0);
+			rc = ipmi_sunoem_sshkey_set(intf, uid, argv[3]);
+		}
+	}
+
+	return rc;
+}

ipmitool/lib/ipmi_tsol.c

@@ -0,0 +1,587 @@
+/*
+ * Copyright (c) 2005 Tyan Computer Corp.  All Rights Reserved.
+ * 
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 
+ * Redistribution of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 
+ * Redistribution in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * 
+ * Neither the name of Sun Microsystems, Inc. or the names of
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ * 
+ * This software is provided "AS IS," without a warranty of any kind.
+ * ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND WARRANTIES,
+ * INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A
+ * PARTICULAR PURPOSE OR NON-INFRINGEMENT, ARE HEREBY EXCLUDED.
+ * SUN MICROSYSTEMS, INC. ("SUN") AND ITS LICENSORS SHALL NOT BE LIABLE
+ * FOR ANY DAMAGES SUFFERED BY LICENSEE AS A RESULT OF USING, MODIFYING
+ * OR DISTRIBUTING THIS SOFTWARE OR ITS DERIVATIVES.  IN NO EVENT WILL
+ * SUN OR ITS LICENSORS BE LIABLE FOR ANY LOST REVENUE, PROFIT OR DATA,
+ * OR FOR DIRECT, INDIRECT, SPECIAL, CONSEQUENTIAL, INCIDENTAL OR
+ * PUNITIVE DAMAGES, HOWEVER CAUSED AND REGARDLESS OF THE THEORY OF
+ * LIABILITY, ARISING OUT OF THE USE OF OR INABILITY TO USE THIS SOFTWARE,
+ * EVEN IF SUN HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
+ */
+
+#include <sys/types.h>
+#include <sys/stat.h>
+#include <sys/poll.h>
+#include <fcntl.h>
+#include <unistd.h>
+#include <errno.h>
+#include <stdlib.h>
+#include <stdio.h>
+#include <string.h>
+#include <sys/socket.h>
+#include <netinet/in.h>
+#include <arpa/inet.h>
+#include <netdb.h>
+#include <signal.h>
+
+#include <sys/select.h>
+#include <sys/time.h>
+#include <sys/ioctl.h>
+
+#include <config.h>
+
+#if defined(HAVE_TERMIOS_H)
+# include <termios.h>
+#elif defined (HAVE_SYS_TERMIOS_H)
+# include <sys/termios.h>
+#endif        
+
+#include <ipmitool/log.h>
+#include <ipmitool/helper.h>
+#include <ipmitool/ipmi.h>
+#include <ipmitool/ipmi_intf.h>
+#include <ipmitool/ipmi_tsol.h>
+#include <ipmitool/ipmi_strings.h>
+#include <ipmitool/bswap.h>
+
+static struct timeval _start_keepalive;
+static struct termios _saved_tio;
+static struct winsize _saved_winsize;
+static int _in_raw_mode = 0;
+static int _altterm = 0;
+
+static int
+ipmi_tsol_command(struct ipmi_intf * intf, char *recvip, int port, unsigned char cmd)
+{
+        struct ipmi_rs *rsp;
+        struct ipmi_rq	req;
+        unsigned char	data[6];
+	unsigned	ip1, ip2, ip3, ip4;
+	uint16_t	portin;
+
+#if WORDS_BIGENDIAN
+	portin = BSWAP_16(port);
+#else
+	portin = port;
+#endif
+
+        if (sscanf(recvip, "%d.%d.%d.%d", &ip1, &ip2, &ip3, &ip4) != 4) {
+                lprintf(LOG_ERR, "Invalid IP address: %s", recvip);
+                return -1;
+        }
+
+        req.msg.netfn    = IPMI_NETFN_TSOL;
+        req.msg.cmd      = cmd;
+        req.msg.data_len = 6;
+        req.msg.data     = data;
+
+	memset(data, 0, sizeof(data));
+        data[0] = ip1;  
+        data[1] = ip2;                    
+        data[2] = ip3;
+        data[3] = ip4;
+        data[4] = (portin & 0xff00) >> 8;
+        data[5] = (portin & 0xff);
+
+        rsp = intf->sendrecv(intf, &req);
+        if (rsp == NULL) {
+		lprintf(LOG_ERR, "Unable to perform TSOL command");
+                return -1;
+	}
+	if (rsp->ccode > 0) {
+		lprintf(LOG_ERR, "Unable to perform TSOL command: %s",
+			val2str(rsp->ccode, completion_code_vals));
+		return -1;
+        }
+
+        return 0;
+}
+
+static int
+ipmi_tsol_start(struct ipmi_intf * intf, char *recvip, int port)
+{
+	return ipmi_tsol_command(intf, recvip, port, IPMI_TSOL_CMD_START);
+}
+
+static int
+ipmi_tsol_stop(struct ipmi_intf * intf, char *recvip, int port)
+{
+        return ipmi_tsol_command(intf, recvip, port, IPMI_TSOL_CMD_STOP);
+}
+
+static int                      
+ipmi_tsol_send_keystroke(struct ipmi_intf * intf, char *buff, int length)
+{                               
+        struct ipmi_rs * rsp;
+        struct ipmi_rq   req;
+        unsigned char    data[16];
+	static unsigned char keyseq = 0;
+                        
+        req.msg.netfn    = IPMI_NETFN_TSOL;
+        req.msg.cmd      = IPMI_TSOL_CMD_SENDKEY;
+        req.msg.data_len = length + 2;
+        req.msg.data     = data;
+
+	memset(data, 0, sizeof(data));
+        data[0] = length + 1;
+	memcpy(data + 1, buff, length);
+	data[length + 1] = keyseq++;
+                
+        rsp = intf->sendrecv(intf, &req);
+        if (rsp == NULL) {
+		lprintf(LOG_ERR, "Unable to send keystroke");
+                return -1;
+	}
+	if (rsp->ccode > 0) {
+		lprintf(LOG_ERR, "Unable to send keystroke: %s",
+			val2str(rsp->ccode, completion_code_vals));
+		return -1;
+        }
+
+        return length;
+} 
+
+static int
+tsol_keepalive(struct ipmi_intf * intf)
+{
+        struct timeval end;
+        
+        gettimeofday(&end, 0);
+
+        if (end.tv_sec - _start_keepalive.tv_sec <= 30)
+                return 0;
+
+        intf->keepalive(intf);
+
+	gettimeofday(&_start_keepalive, 0);
+
+        return 0;
+}
+
+static void
+print_escape_seq(struct ipmi_intf *intf)
+{
+	lprintf(LOG_NOTICE,
+		"       %c.  - terminate connection\r\n"
+		"       %c^Z - suspend ipmitool\r\n"
+		"       %c^X - suspend ipmitool, but don't restore tty on restart\r\n"
+		"       %c?  - this message\r\n"
+		"       %c%c  - send the escape character by typing it twice\r\n"
+		"       (Note that escapes are only recognized immediately after newline.)\r",
+		intf->session->sol_escape_char,
+		intf->session->sol_escape_char,
+		intf->session->sol_escape_char,
+		intf->session->sol_escape_char,
+		intf->session->sol_escape_char,
+		intf->session->sol_escape_char);
+}
+
+static int
+leave_raw_mode(void)
+{
+	if (!_in_raw_mode)
+		return -1;
+	else if (tcsetattr(fileno(stdin), TCSADRAIN, &_saved_tio) == -1)
+		lperror(LOG_ERR, "tcsetattr(stdin)");
+	else if (tcsetattr(fileno(stdout), TCSADRAIN, &_saved_tio) == -1)
+		lperror(LOG_ERR, "tcsetattr(stdout)");
+	else
+		_in_raw_mode = 0;
+
+	return 0;
+}
+
+static int
+enter_raw_mode(void)
+{
+	struct termios tio;
+
+	if (tcgetattr(fileno(stdout), &_saved_tio) < 0) {
+		lperror(LOG_ERR, "tcgetattr failed");
+		return -1;
+	}
+
+	tio = _saved_tio;
+
+	if (_altterm) {
+		tio.c_iflag &= (ISTRIP | IGNBRK );
+		tio.c_cflag &= ~(CSIZE | PARENB | IXON | IXOFF | IXANY);
+		tio.c_cflag |= (CS8 |CREAD) | (IXON|IXOFF|IXANY);
+		tio.c_lflag &= 0;
+		tio.c_cc[VMIN] = 1;
+		tio.c_cc[VTIME] = 0;
+	} else {
+		tio.c_iflag |= IGNPAR;
+		tio.c_iflag &= ~(ISTRIP | INLCR | IGNCR | ICRNL | IXON | IXANY | IXOFF);
+		tio.c_lflag &= ~(ISIG | ICANON | ECHO | ECHOE | ECHOK | ECHONL | IEXTEN);
+		tio.c_oflag &= ~OPOST;
+		tio.c_cc[VMIN] = 1;
+		tio.c_cc[VTIME] = 0;
+	}
+
+	if (tcsetattr(fileno(stdin), TCSADRAIN, &tio) < 0)
+		lperror(LOG_ERR, "tcsetattr(stdin)");
+	else if (tcsetattr(fileno(stdout), TCSADRAIN, &tio) < 0)
+		lperror(LOG_ERR, "tcsetattr(stdout)");
+	else
+		_in_raw_mode = 1;
+
+	return 0;
+}
+
+static void
+suspend_self(int restore_tty)
+{
+	leave_raw_mode();
+
+	kill(getpid(), SIGTSTP);
+
+	if (restore_tty)
+		enter_raw_mode();
+}
+
+static int
+do_inbuf_actions(struct ipmi_intf *intf, char *in_buff, int len)
+{
+	static int in_esc = 0;
+	static int last_was_cr = 1;
+	int i;
+
+	for(i = 0; i < len ;) {
+		if (!in_esc) {
+			if (last_was_cr &&
+			    (in_buff[i] == intf->session->sol_escape_char)) {
+				in_esc = 1;
+				memmove(in_buff, in_buff + 1, len - i - 1);
+				len--;
+				continue;
+			}
+		}
+		if (in_esc) {
+			if (in_buff[i] == intf->session->sol_escape_char) {
+				in_esc = 0;
+				i++;
+				continue;
+			}
+
+			switch (in_buff[i]) {
+			case '.':
+				printf("%c. [terminated ipmitool]\r\n",
+				       intf->session->sol_escape_char);
+				return -1;
+
+			case 'Z' - 64:
+				printf("%c^Z [suspend ipmitool]\r\n",
+				       intf->session->sol_escape_char);
+				suspend_self(1); /* Restore tty back to raw */
+				break;
+
+			case 'X' - 64:
+				printf("%c^X [suspend ipmitool]\r\n",
+				       intf->session->sol_escape_char);
+				suspend_self(0); /* Don't restore to raw mode */
+				break;
+
+			case '?':
+				printf("%c? [ipmitool help]\r\n",
+				       intf->session->sol_escape_char);
+				print_escape_seq(intf);
+				break;
+			}
+
+			memmove(in_buff, in_buff + 1, len - i - 1);
+			len--;
+			in_esc = 0;
+
+			continue;
+		}
+
+		last_was_cr = (in_buff[i] == '\r' || in_buff[i] == '\n');
+
+		i++;
+	}
+
+	return len;
+}
+
+
+static void
+do_terminal_cleanup(void)
+{
+	if (_saved_winsize.ws_row > 0 && _saved_winsize.ws_col > 0)
+		ioctl(fileno(stdout), TIOCSWINSZ, &_saved_winsize);
+
+	leave_raw_mode();
+
+	if (errno)
+		lprintf(LOG_ERR, "Exiting due to error %d -> %s",
+			errno, strerror(errno));
+}
+
+static void
+set_terminal_size(int rows, int cols)
+{
+	struct winsize winsize;
+
+	if (rows <= 0 || cols <= 0)
+		return;
+
+	/* save initial winsize */
+	ioctl(fileno(stdout), TIOCGWINSZ, &_saved_winsize);
+
+	/* set new winsize */
+	winsize.ws_row = rows;
+	winsize.ws_col = cols;
+	ioctl(fileno(stdout), TIOCSWINSZ, &winsize);
+}
+
+static void
+print_tsol_usage(void)
+{
+	struct winsize winsize;
+	
+	lprintf(LOG_NOTICE, "Usage: tsol [recvip] [port=NUM] [ro|rw] [rows=NUM] [cols=NUM] [altterm]");
+	lprintf(LOG_NOTICE, "       recvip       Receiver IP Address             [default=local]");
+	lprintf(LOG_NOTICE, "       port=NUM     Receiver UDP Port               [default=%d]",
+		IPMI_TSOL_DEF_PORT);
+	lprintf(LOG_NOTICE, "       ro|rw        Set Read-Only or Read-Write     [default=rw]");
+
+	ioctl(fileno(stdout), TIOCGWINSZ, &winsize);
+	lprintf(LOG_NOTICE, "       rows=NUM     Set terminal rows               [default=%d]",
+		winsize.ws_row);
+	lprintf(LOG_NOTICE, "       cols=NUM     Set terminal columns            [default=%d]",
+		winsize.ws_col);
+
+	lprintf(LOG_NOTICE, "       altterm      Alternate terminal setup        [default=off]");
+}
+
+int
+ipmi_tsol_main(struct ipmi_intf * intf, int argc, char ** argv)
+{
+	struct pollfd fds_wait[3], fds_data_wait[3], *fds;
+	struct sockaddr_in sin, myaddr;
+	socklen_t mylen;
+	char *recvip = NULL;
+	char out_buff[IPMI_BUF_SIZE * 8], in_buff[IPMI_BUF_SIZE];
+	char buff[IPMI_BUF_SIZE + 4];
+	int fd_socket, result, i;
+	int out_buff_fill, in_buff_fill;
+	int ip1, ip2, ip3, ip4;
+	int read_only = 0, rows = 0, cols = 0;
+	int port = IPMI_TSOL_DEF_PORT;
+
+	if (strlen(intf->name) == 3 && strncmp(intf->name, "lan", 3) != 0) {
+		lprintf(LOG_ERR, "Error: Tyan SOL is only available over lan interface");
+		return -1;
+	}
+
+	for (i = 0; i<argc; i++) {
+		if (sscanf(argv[i], "%d.%d.%d.%d", &ip1, &ip2, &ip3, &ip4) == 4)
+			recvip = strdup(argv[i]);
+		else if (sscanf(argv[i], "port=%d", &ip1) == 1)
+			port = ip1;
+		else if (sscanf(argv[i], "rows=%d", &ip1) == 1)
+			rows = ip1;
+		else if (sscanf(argv[i], "cols=%d", &ip1) == 1)
+			cols = ip1;
+		else if (strlen(argv[i]) == 2 && strncmp(argv[i], "ro", 2) == 0)
+			read_only = 1;
+		else if (strlen(argv[i]) == 2 && strncmp(argv[i], "rw", 2) == 0)
+			read_only = 0;
+		else if (strlen(argv[i]) == 7 && strncmp(argv[i], "altterm", 7) == 0)
+			_altterm = 1;
+		else if (strlen(argv[i]) == 4 && strncmp(argv[i], "help", 4) == 0) {
+			print_tsol_usage();
+			return 0;
+		}
+		else {
+			print_tsol_usage();
+			return 0;
+		}
+	}
+
+	/* create udp socket to receive the packet */	
+	memset(&sin, 0, sizeof(sin));
+	sin.sin_family = AF_INET;
+	sin.sin_port = htons(port);
+
+	result = inet_pton(AF_INET, (const char *)intf->session->hostname,
+			   &intf->session->addr.sin_addr);
+
+	if (result <= 0) {
+		struct hostent *host = gethostbyname((const char *)intf->session->hostname);
+		if (host == NULL ) {
+			lprintf(LOG_ERR, "Address lookup for %s failed",
+				intf->session->hostname);
+			return -1;
+		}
+		intf->session->addr.sin_family = host->h_addrtype;
+		memcpy(&intf->session->addr.sin_addr, host->h_addr, host->h_length);
+	}
+
+	fd_socket = socket(PF_INET, SOCK_DGRAM, IPPROTO_UDP);
+	if (fd_socket < 0) {
+		lprintf(LOG_ERR, "Can't open port %d", port);
+		return -1;
+	}
+	bind(fd_socket, (struct sockaddr *)&sin, sizeof(sin));
+
+	/*
+	 * retrieve local IP address if not supplied on command line
+	 */
+	if (recvip == NULL) {
+		result = intf->open(intf);	/* must connect first */
+		if (result < 0)
+			return -1;
+
+		mylen = sizeof(myaddr);
+		if (getsockname(intf->fd, (struct sockaddr *)&myaddr, &mylen) < 0) {
+			lperror(LOG_ERR, "getsockname failed");
+			return -1;
+		}
+
+		recvip = inet_ntoa(myaddr.sin_addr);
+		if (recvip == NULL) {
+			lprintf(LOG_ERR, "Unable to find local IP address");
+			return -1;
+		}
+	}
+
+	printf("[Starting %sSOL with receiving address %s:%d]\r\n",
+	       read_only ? "Read-only " : "", recvip, port);
+
+	set_terminal_size(rows, cols);
+	enter_raw_mode();
+
+	/*
+	 * talk to smdc to start Console redirect - IP address and port as parameter 
+	 * ipmitool -I lan -H 192.168.168.227 -U Administrator raw 0x30 0x06 0xC0 0xA8 0xA8 0x78 0x1A 0x0A
+	 */
+	result = ipmi_tsol_start(intf, recvip, port);
+        if (result < 0) {
+		lprintf(LOG_ERR, "Error starting SOL");
+                return -1;
+        }
+
+	printf("[SOL Session operational.  Use %c? for help]\r\n",
+	       intf->session->sol_escape_char);
+
+	gettimeofday(&_start_keepalive, 0);	
+
+	fds_wait[0].fd = fd_socket;
+	fds_wait[0].events = POLLIN;
+	fds_wait[0].revents = 0;
+	fds_wait[1].fd = fileno(stdin);
+	fds_wait[1].events = POLLIN;
+	fds_wait[1].revents = 0;
+	fds_wait[2].fd = -1;
+	fds_wait[2].events = 0;
+	fds_wait[2].revents = 0;
+	
+	fds_data_wait[0].fd = fd_socket;
+	fds_data_wait[0].events = POLLIN | POLLOUT;
+	fds_data_wait[0].revents = 0;
+	fds_data_wait[1].fd = fileno(stdin);
+	fds_data_wait[1].events = POLLIN;
+	fds_data_wait[1].revents = 0;
+	fds_data_wait[2].fd = fileno(stdout);
+	fds_data_wait[2].events = POLLOUT;
+	fds_data_wait[2].revents = 0;
+	
+	out_buff_fill = 0;
+	in_buff_fill = 0;
+	fds = fds_wait;
+	
+	for (;;) {
+		result = poll(fds, 3, 15*1000);
+		if (result < 0)
+			break;
+
+		/* send keepalive packet */
+		tsol_keepalive(intf);
+
+		if ((fds[0].revents & POLLIN) && (sizeof(out_buff) > out_buff_fill)){
+			socklen_t sin_len = sizeof(sin);
+			result = recvfrom(fd_socket, buff, sizeof(out_buff) - out_buff_fill + 4, 0,
+					  (struct sockaddr *)&sin, &sin_len);
+
+			/* read the data from udp socket, skip some bytes in the head */
+			if((result - 4) > 0 ){
+				int length = result - 4;
+#if 1
+		 		length = (unsigned char)buff[2] & 0xff;
+			       	length *= 256;
+				length += ((unsigned char)buff[3] & 0xff);
+				if ((length <= 0) || (length > (result - 4)))
+			              length = result - 4;
+#endif
+				memcpy(out_buff + out_buff_fill, buff + 4, length);
+				out_buff_fill += length;
+			}
+		}
+		if ((fds[1].revents & POLLIN) && (sizeof(in_buff) > in_buff_fill)) {
+			result = read(fileno(stdin), in_buff + in_buff_fill,
+				      sizeof(in_buff) - in_buff_fill); // read from keyboard
+			if (result > 0) {
+				int bytes;
+				bytes = do_inbuf_actions(intf, in_buff + in_buff_fill, result);
+				if(bytes < 0) {
+					result = ipmi_tsol_stop(intf, recvip, port);
+					do_terminal_cleanup();
+					return result;
+				}
+				if (read_only) 
+					bytes = 0;
+				in_buff_fill += bytes;
+			}
+		}
+		if ((fds[2].revents & POLLOUT) && out_buff_fill) {
+			result = write(fileno(stdout), out_buff, out_buff_fill); // to screen
+			if (result > 0) {
+				out_buff_fill -= result;
+				if (out_buff_fill) {
+					memmove(out_buff, out_buff + result, out_buff_fill);
+				}
+			}
+		}
+		if ((fds[0].revents & POLLOUT) && in_buff_fill) {
+			/*
+			 * translate key and send that to SMDC using IPMI 
+			 * ipmitool -I lan -H 192.168.168.227 -U Administrator raw 0x30 0x03 0x04 0x1B 0x5B 0x43
+			 */
+			result = ipmi_tsol_send_keystroke(intf, in_buff, __min(in_buff_fill,14));
+			if (result > 0) {
+				gettimeofday(&_start_keepalive, 0);
+				in_buff_fill -= result;
+				if (in_buff_fill) {
+					memmove(in_buff, in_buff + result, in_buff_fill);
+				}
+			}
+		}
+		fds = (in_buff_fill || out_buff_fill )? 
+			fds_data_wait : fds_wait;
+	}
+	
+	return 0;
+}

ipmitool/lib/ipmi_user.c

@@ -0,0 +1,826 @@
+/*
+ * Copyright (c) 2003 Sun Microsystems, Inc.  All Rights Reserved.
+ * 
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 
+ * Redistribution of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 
+ * Redistribution in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * 
+ * Neither the name of Sun Microsystems, Inc. or the names of
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ * 
+ * This software is provided "AS IS," without a warranty of any kind.
+ * ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND WARRANTIES,
+ * INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A
+ * PARTICULAR PURPOSE OR NON-INFRINGEMENT, ARE HEREBY EXCLUDED.
+ * SUN MICROSYSTEMS, INC. ("SUN") AND ITS LICENSORS SHALL NOT BE LIABLE
+ * FOR ANY DAMAGES SUFFERED BY LICENSEE AS A RESULT OF USING, MODIFYING
+ * OR DISTRIBUTING THIS SOFTWARE OR ITS DERIVATIVES.  IN NO EVENT WILL
+ * SUN OR ITS LICENSORS BE LIABLE FOR ANY LOST REVENUE, PROFIT OR DATA,
+ * OR FOR DIRECT, INDIRECT, SPECIAL, CONSEQUENTIAL, INCIDENTAL OR
+ * PUNITIVE DAMAGES, HOWEVER CAUSED AND REGARDLESS OF THE THEORY OF
+ * LIABILITY, ARISING OUT OF THE USE OF OR INABILITY TO USE THIS SOFTWARE,
+ * EVEN IF SUN HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
+ */
+
+#include <stdlib.h>
+#include <string.h>
+#include <stdio.h>
+#include <sys/types.h>
+#include <sys/select.h>
+#include <sys/time.h>
+#include <signal.h>
+#include <unistd.h>
+
+#include <ipmitool/helper.h>
+#include <ipmitool/log.h>
+#include <ipmitool/ipmi.h>
+#include <ipmitool/ipmi_intf.h>
+#include <ipmitool/ipmi_user.h>
+#include <ipmitool/ipmi_constants.h>
+#include <ipmitool/ipmi_strings.h>
+#include <ipmitool/bswap.h>
+
+
+extern int verbose;
+extern int csv_output;
+
+
+#define IPMI_PASSWORD_DISABLE_USER  0x00
+#define IPMI_PASSWORD_ENABLE_USER   0x01
+#define IPMI_PASSWORD_SET_PASSWORD  0x02
+#define IPMI_PASSWORD_TEST_PASSWORD 0x03
+
+
+/*
+ * ipmi_get_user_access
+ *
+ * param intf		[in]
+ * param channel_number [in]
+ * param user_id	[in]
+ * param user_access	[out]
+ *
+ * return 0 on succes
+ *	  1 on failure
+ */
+static int
+ipmi_get_user_access(
+		     struct ipmi_intf * intf,	   
+		     uint8_t	channel_number,
+		     uint8_t	user_id,       
+		     struct		user_access_rsp * user_access)
+					 
+{
+	struct ipmi_rs	     * rsp;
+	struct ipmi_rq	       req;
+	uint8_t	       msg_data[2];
+
+	memset(&req, 0, sizeof(req));
+	req.msg.netfn    = IPMI_NETFN_APP;	     /* 0x06 */
+	req.msg.cmd	     = IPMI_GET_USER_ACCESS; /* 0x44 */
+	req.msg.data     = msg_data;
+	req.msg.data_len = 2;
+
+
+	/* The channel number will remain constant throughout this function */
+	msg_data[0] = channel_number;
+	msg_data[1] = user_id;
+	
+	rsp = intf->sendrecv(intf, &req);
+
+	if (rsp == NULL) {
+		lprintf(LOG_ERR, "Get User Access command failed "
+			"(channel %d, user %d)", channel_number, user_id);
+		return -1;
+	}
+	if (rsp->ccode > 0) {
+		lprintf(LOG_ERR, "Get User Access command failed "
+			"(channel %d, user %d): %s", channel_number, user_id,
+			val2str(rsp->ccode, completion_code_vals));
+		return -1;
+	}
+
+	memcpy(user_access,
+	       rsp->data,
+	       sizeof(struct user_access_rsp));
+
+	return 0;
+}
+
+
+
+/*
+ * ipmi_get_user_name
+ *
+ * param intf		[in]
+ * param channel_number [in]
+ * param user_id	[in]
+ * param user_name	[out]
+ *
+ * return 0 on succes
+ *	  1 on failure
+ */
+static int
+ipmi_get_user_name(
+		   struct ipmi_intf * intf,	   
+		   uint8_t      user_id,	     
+		   char		    * user_name)
+					 
+{
+	struct ipmi_rs	     * rsp;
+	struct ipmi_rq	       req;
+	uint8_t	       msg_data[1];
+
+	memset(user_name, 0, 17);
+
+	memset(&req, 0, sizeof(req));
+	req.msg.netfn    = IPMI_NETFN_APP;	   /* 0x06 */
+	req.msg.cmd	     = IPMI_GET_USER_NAME; /* 0x45 */
+	req.msg.data     = msg_data;
+	req.msg.data_len = 1;
+
+	msg_data[0] = user_id;
+	
+	rsp = intf->sendrecv(intf, &req);
+
+	if (rsp == NULL) {
+		lprintf(LOG_ERR, "Get User Name command failed (user %d)",
+			user_id);
+		return -1;
+	}
+	if (rsp->ccode > 0) {
+		if (rsp->ccode == 0xcc)
+			return 0;
+		lprintf(LOG_ERR, "Get User Name command failed (user %d): %s",
+			user_id, val2str(rsp->ccode, completion_code_vals));
+		return -1;
+	}
+
+	memcpy(user_name, rsp->data, 16);
+
+	return 0;
+}
+
+
+
+
+static void
+dump_user_access(
+		 uint8_t		  user_id,
+		 const		   char * user_name,
+		 struct user_access_rsp * user_access)
+{
+	static int printed_header = 0;
+
+	if (! printed_header)
+	{
+		printf("ID  Name	     Callin  Link Auth	IPMI Msg   "
+		       "Channel Priv Limit\n");
+		printed_header = 1;
+	}
+	
+
+	printf("%-4d%-17s%-8s%-11s%-11s%-s\n",
+	       user_id,
+	       user_name,
+	       user_access->no_callin_access? "false": "true ",
+	       user_access->link_auth_access? "true ": "false",
+	       user_access->ipmi_messaging_access? "true ": "false",
+	       val2str(user_access->channel_privilege_limit,
+		       ipmi_privlvl_vals));
+}
+
+
+
+static void
+dump_user_access_csv(
+		     uint8_t	      user_id,
+		     const char		    * user_name,
+		     struct user_access_rsp * user_access)
+{
+	printf("%d,%s,%s,%s,%s,%s\n",
+	       user_id,
+	       user_name,
+	       user_access->no_callin_access? "false": "true",
+	       user_access->link_auth_access? "true": "false",
+	       user_access->ipmi_messaging_access? "true": "false",
+	       val2str(user_access->channel_privilege_limit,
+		       ipmi_privlvl_vals));
+}
+
+
+
+static int
+ipmi_print_user_list(
+		     struct ipmi_intf * intf,
+		     uint8_t	channel_number)
+{
+	/* This is where you were! */
+	char user_name[17];
+	struct user_access_rsp  user_access;
+	uint8_t current_user_id = 1;
+
+
+	do
+	{
+		if (ipmi_get_user_access(intf,
+					 channel_number,
+					 current_user_id,
+					 &user_access))
+			return -1;
+
+
+		if (ipmi_get_user_name(intf,
+				       current_user_id,
+				       user_name))
+			return -1;
+		
+		
+		if ((current_user_id == 0)	      ||
+		    user_access.link_auth_access      ||
+		    user_access.ipmi_messaging_access ||
+		    strcmp("", user_name))
+		{
+			if (csv_output)
+				dump_user_access_csv(current_user_id,
+						     user_name, &user_access);
+			else
+				dump_user_access(current_user_id,
+						 user_name,
+						 &user_access);
+		}
+
+
+		++current_user_id;
+	} while((current_user_id <= user_access.maximum_ids) &&
+			(current_user_id <= 63)); /* Absolute maximum allowed by spec */
+
+
+	return 0;
+}
+
+
+
+static int
+ipmi_print_user_summary(
+			struct ipmi_intf * intf,
+			uint8_t	   channel_number)
+{
+	struct user_access_rsp     user_access;
+
+	if (ipmi_get_user_access(intf,
+				 channel_number,
+				 1,
+				 &user_access))
+		return -1;
+
+	if (csv_output)
+	{
+		printf("%d,%d,%d\n",
+		       user_access.maximum_ids,
+		       user_access.enabled_user_count,
+		       user_access.fixed_name_count);
+	}
+	else
+	{
+		printf("Maximum IDs	    : %d\n",
+		       user_access.maximum_ids);
+		printf("Enabled User Count  : %d\n",
+		       user_access.enabled_user_count);
+		printf("Fixed Name Count    : %d\n",
+		       user_access.fixed_name_count);
+	}
+
+	return 0;
+}
+
+
+
+/*
+ * ipmi_user_set_username
+ */
+static int
+ipmi_user_set_username(
+		       struct ipmi_intf * intf,	   
+		       uint8_t	  user_id,	 
+		       const char	* name)
+{
+	struct ipmi_rs	     * rsp;
+	struct ipmi_rq	       req;
+	uint8_t	       msg_data[17];
+
+	memset(&req, 0, sizeof(req));
+	req.msg.netfn    = IPMI_NETFN_APP;	     /* 0x06 */
+	req.msg.cmd	     = IPMI_SET_USER_NAME;   /* 0x45 */
+	req.msg.data     = msg_data;
+	req.msg.data_len = 17;
+
+
+	/* The channel number will remain constant throughout this function */
+	msg_data[0] = user_id;
+	memset(msg_data + 1, 0, 16);
+	strcpy((char *)(msg_data + 1), name);
+
+	rsp = intf->sendrecv(intf, &req);
+
+	if (rsp == NULL) {
+		lprintf(LOG_ERR, "Set User Name command failed (user %d, name %s)",
+			user_id, name);
+		return -1;
+	}
+	if (rsp->ccode > 0) {
+		lprintf(LOG_ERR, "Set User Name command failed (user %d, name %s): %s",
+			user_id, name, val2str(rsp->ccode, completion_code_vals));
+		return -1;
+	}
+
+	return 0;
+}
+	
+
+static int
+ipmi_user_set_userpriv(
+		       struct ipmi_intf * intf,
+             uint8_t	  channel,
+		       uint8_t	  user_id,
+		       const unsigned char	privLevel)
+{
+	struct ipmi_rs	     * rsp;
+	struct ipmi_rq	       req;
+	uint8_t	       msg_data[17];
+
+	memset(&req, 0, sizeof(req));
+	req.msg.netfn    = IPMI_NETFN_APP;	     /* 0x06 */
+	req.msg.cmd	     = IPMI_SET_USER_ACCESS;   /* 0x43 */
+	req.msg.data     = msg_data;
+	req.msg.data_len = 3;
+
+
+	/* The channel number will remain constant throughout this function */
+	msg_data[0] = (channel   & 0x0f); /* Do not change any bytes */
+	msg_data[1] = (user_id   & 0x3f);
+	msg_data[2] = (privLevel & 0x0f);
+
+	rsp = intf->sendrecv(intf, &req);
+
+	if (rsp == NULL) 
+   {
+		lprintf(LOG_ERR, "Set Privilege Level command failed (user %d)",
+			user_id);
+		return -1;
+	}
+	if (rsp->ccode > 0) 
+   {
+		lprintf(LOG_ERR, "Set Privilege Level command failed (user %d)",
+			user_id);
+		return -1;
+	}
+
+	return 0;
+}
+
+
+/*
+ * ipmi_user_set_password
+ *
+ * This function is responsible for 4 things
+ * Enabling/Disabling users
+ * Setting/Testing passwords
+ */
+static int
+ipmi_user_set_password(
+		       struct ipmi_intf * intf,	   
+		       uint8_t	  user_id,
+		       uint8_t	  operation,
+		       const char	* password,
+		       int                is_twenty_byte_password)
+{
+	struct ipmi_rs	     * rsp;
+	struct ipmi_rq	       req;
+	uint8_t	             * msg_data;
+
+	int password_length = (is_twenty_byte_password? 20 : 16);
+
+	msg_data = (uint8_t*)malloc(password_length + 2);
+
+
+	memset(&req, 0, sizeof(req));
+	req.msg.netfn    = IPMI_NETFN_APP;	    /* 0x06 */
+	req.msg.cmd	 = IPMI_SET_USER_PASSWORD;  /* 0x47 */
+	req.msg.data     = msg_data;
+	req.msg.data_len = password_length + 2;
+
+
+	/* The channel number will remain constant throughout this function */
+	msg_data[0] = user_id;
+	
+	if (is_twenty_byte_password)
+		msg_data[0] |= 0x80;
+	
+	msg_data[1] = operation;
+
+	memset(msg_data + 2, 0, password_length);
+
+	if (password != NULL)
+		strncpy((char *)(msg_data + 2), password, password_length);
+
+	rsp = intf->sendrecv(intf, &req);
+
+	if (rsp == NULL) {
+		lprintf(LOG_ERR, "Set User Password command failed (user %d)",
+			user_id);
+		return -1;
+	}
+	if (rsp->ccode > 0) {
+		lprintf(LOG_ERR, "Set User Password command failed (user %d): %s",
+			user_id, val2str(rsp->ccode, completion_code_vals));
+		return rsp->ccode;
+	}
+
+	return 0;
+}
+
+
+
+/*
+ * ipmi_user_test_password
+ *
+ * Call ipmi_user_set_password, and interpret the result
+ */
+static int
+ipmi_user_test_password(
+			struct ipmi_intf * intf,
+			uint8_t      user_id,
+			const char       * password,
+			int                is_twenty_byte_password)
+{
+	int ret;
+
+	ret = ipmi_user_set_password(intf,
+				     user_id,
+				     IPMI_PASSWORD_TEST_PASSWORD,
+				     password,
+				     is_twenty_byte_password);
+
+	switch (ret) {
+	case 0:
+		printf("Success\n");
+		break;
+	case 0x80:
+		printf("Failure: password incorrect\n");
+		break;
+	case 0x81:
+		printf("Failure: wrong password size\n");
+		break;
+	default:
+		printf("Unknown error\n");
+	}
+
+	return ((ret == 0) ? 0 : -1);
+}
+
+	
+
+/*
+ * print_user_usage
+ */
+static void
+print_user_usage(void)
+{
+	lprintf(LOG_NOTICE, "User Commands: summary [<channel number>]");
+	lprintf(LOG_NOTICE, "		   list	   [<channel number>]");
+	lprintf(LOG_NOTICE, "		   set name	<user id> <username>");
+	lprintf(LOG_NOTICE, "		   set password <user id> [<password>]");
+	lprintf(LOG_NOTICE, "		   disable	<user id>");
+	lprintf(LOG_NOTICE, "		   enable	<user id>");
+	lprintf(LOG_NOTICE, "		   priv  	<user id> <privile level> [<channel number>]");
+	lprintf(LOG_NOTICE, "		   test		<user id> <16|20> [<password]>\n");
+}
+
+
+const char *
+ipmi_user_build_password_prompt(uint8_t user_id)
+{
+	static char prompt[128];
+	memset(prompt, 0, 128);
+	snprintf(prompt, 128, "Password for user %d: ", user_id);
+	return prompt;
+}
+
+
+/*
+ * ipmi_user_main
+ *
+ * Upon entry to this function argv should contain our arguments
+ * specific to this subcommand
+ */
+int
+ipmi_user_main(struct ipmi_intf * intf, int argc, char ** argv)
+{
+	int retval = 0;
+
+	/*
+	 * Help
+	 */
+	if (argc == 0 || strncmp(argv[0], "help", 4) == 0)
+	{
+		print_user_usage();
+	}
+
+	/*
+	 * Summary
+	 */
+	else if (strncmp(argv[0], "summary", 7) == 0)
+	{
+		uint8_t channel;
+
+		if (argc == 1)
+			channel = 0x0E; /* Ask about the current channel */
+		else if (argc == 2)
+			channel = (uint8_t)strtol(argv[1], NULL, 0);
+		else
+		{
+			print_user_usage();	
+			return -1;
+		}
+
+		retval = ipmi_print_user_summary(intf, channel);
+	}
+
+
+	/*
+	 * List
+	 */
+	else if (strncmp(argv[0], "list", 4) == 0)
+	{
+		uint8_t channel;
+
+		if (argc == 1)
+			channel = 0x0E; /* Ask about the current channel */
+		else if (argc == 2)
+			channel = (uint8_t)strtol(argv[1], NULL, 0);
+		else
+		{
+			print_user_usage();	
+			return -1;
+		}
+
+		retval = ipmi_print_user_list(intf, channel);
+	}
+
+
+
+	/*
+	 * Test
+	 */
+	else if (strncmp(argv[0], "test", 4) == 0)
+	{
+		// a little fucking irritating, isn't it
+		if ((argc == 3 || argc == 4)  &&
+		    ((strncmp(argv[2], "16", 2) == 0) ||
+		     (strncmp(argv[2], "20", 2) == 0)))
+		{
+			char * password = NULL;
+			int password_length = atoi(argv[2]);
+			uint8_t user_id = (uint8_t)strtol(argv[1],
+								      NULL,
+								      0);
+			if (user_id == 0)
+			{
+				lprintf(LOG_ERR, "Invalid user ID: %d", user_id);
+				return -1;
+			}
+
+
+			if (argc == 3)
+			{
+				/* We need to prompt for a password */
+
+				char * tmp;
+				const char * password_prompt =
+					ipmi_user_build_password_prompt(user_id);
+				
+#ifdef HAVE_GETPASSPHRASE
+				tmp = getpassphrase (password_prompt);
+#else
+				tmp = (char*)getpass (password_prompt);
+#endif
+				if (tmp != NULL)
+					password = strdup(tmp);
+				if (password == NULL) {
+					lprintf(LOG_ERR, "ipmitool: malloc failure");
+					return -1;
+				}
+			}
+			else
+				password = argv[3];
+
+
+			retval = ipmi_user_test_password(intf,
+							 user_id,
+							 password,
+							 password_length == 20);
+
+
+		}
+		else
+		{
+			print_user_usage();
+			return -1;
+		}
+	}
+
+	
+	/*
+	 * Set
+	 */
+	else if (strncmp(argv[0], "set", 3) == 0)
+	{
+		/*
+		 * Set Password
+		 */
+		if ((argc >= 3) &&
+		    (strncmp("password", argv[1], 8) == 0)) 
+		{
+			char * password = NULL;
+			uint8_t user_id = (uint8_t)strtol(argv[2],
+								      NULL,
+								      0);
+			if (user_id == 0)
+			{
+				lprintf(LOG_ERR, "Invalid user ID: %d", user_id);
+				return -1;
+			}
+
+
+			if (argc == 3)
+			{
+				/* We need to prompt for a password */
+
+				char * tmp;
+				const char * password_prompt =
+					ipmi_user_build_password_prompt(user_id);
+
+#ifdef HAVE_GETPASSPHRASE
+				tmp = getpassphrase (password_prompt);
+#else
+				tmp = (char*)getpass (password_prompt);
+#endif
+				if (tmp != NULL)
+				{
+					password = strdup(tmp);
+					if (password == NULL) {
+						lprintf(LOG_ERR, "ipmitool: malloc failure");
+						return -1;
+					}
+
+#ifdef HAVE_GETPASSPHRASE
+					tmp = getpassphrase (password_prompt);
+#else
+					tmp = (char*)getpass (password_prompt);
+#endif
+					if (tmp != NULL)
+					{
+						if (strlen(password) != strlen(tmp))
+						{
+							lprintf(LOG_ERR, "Passwords do not match");
+							return -1;
+						}
+						if (strncmp(password, tmp, strlen(tmp)))
+						{
+							lprintf(LOG_ERR, "Passwords to not match");
+							return -1;
+						}
+					}
+				}
+			}
+			else
+				password = argv[3];
+
+			if (strlen(password) > 20)
+			{
+				lprintf(LOG_ERR, "Password is too long (> 20 bytes)");
+				return -1;
+			}
+			
+
+			retval = ipmi_user_set_password(intf,
+							user_id,
+							IPMI_PASSWORD_SET_PASSWORD,
+							password,
+							strlen(password) > 16);
+		}
+		
+
+		/*
+		 * Set Name
+		 */
+		else if ((argc >= 2) &&
+			 (strncmp("name", argv[1], 4) == 0))
+		{
+			if (argc != 4)
+			{
+				print_user_usage();
+				return -1;
+			}
+
+			retval = ipmi_user_set_username(intf,
+							(uint8_t)strtol(argv[2],
+									      NULL,
+									      0),
+							argv[3]);
+		}
+		else
+		{
+			print_user_usage();
+			return -1;
+		}
+
+	}
+
+	else if (strncmp(argv[0], "priv", 4) == 0)
+	{
+   	uint8_t user_id;
+   	uint8_t priv_level;
+   	uint8_t channel = 0x0e; /* Use channel running on */
+
+		if (
+            (argc != 3) &&
+            (argc != 4)
+         )
+		
+
+      if (argc == 4)
+      {
+         channel = (uint8_t)strtol(argv[3], NULL, 0);
+         channel = (channel & 0x0f);
+		}
+      
+      user_id = (uint8_t)strtol(argv[1], NULL, 0);
+
+		priv_level = (uint8_t)strtol(argv[2], NULL, 0);
+      priv_level = (priv_level & 0x0f);
+
+		if (user_id == 0)
+		{
+			lprintf(LOG_ERR, "Invalid user ID: %d", user_id);
+			return -1;
+		}
+
+		retval = ipmi_user_set_userpriv(intf,channel,user_id,priv_level);
+   }
+
+	/*
+	 * Disable / Enable
+	 */
+	else if ((strncmp(argv[0], "disable", 7) == 0) ||
+		 (strncmp(argv[0], "enable",  6) == 0))
+	{
+		uint8_t user_id;
+		uint8_t operation;
+		char null_password[16]; /* Not used, but required */
+
+		memset(null_password, 0, sizeof(null_password));
+
+		if (argc != 2)
+		{
+			print_user_usage();
+			return -1;
+		}
+
+		user_id = (uint8_t)strtol(argv[1],
+						NULL,
+						0);
+		if (user_id == 0)
+		{
+			lprintf(LOG_ERR, "Invalid user ID: %d", user_id);
+			return -1;
+		}
+
+
+		operation = (strncmp(argv[0], "disable", 7) == 0) ?
+			IPMI_PASSWORD_DISABLE_USER : IPMI_PASSWORD_ENABLE_USER;
+
+		retval = ipmi_user_set_password(intf,
+						user_id,
+						operation,
+						null_password,
+						0); /* This field is ignored */
+	}
+	
+
+    
+	else
+	{
+		print_user_usage();
+	}
+
+	return retval;
+}

ipmitool/lib/log.c

@@ -0,0 +1,154 @@
+/*
+ * Copyright (c) 2003 Sun Microsystems, Inc.  All Rights Reserved.
+ * 
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 
+ * Redistribution of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 
+ * Redistribution in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * 
+ * Neither the name of Sun Microsystems, Inc. or the names of
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ * 
+ * This software is provided "AS IS," without a warranty of any kind.
+ * ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND WARRANTIES,
+ * INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A
+ * PARTICULAR PURPOSE OR NON-INFRINGEMENT, ARE HEREBY EXCLUDED.
+ * SUN MICROSYSTEMS, INC. ("SUN") AND ITS LICENSORS SHALL NOT BE LIABLE
+ * FOR ANY DAMAGES SUFFERED BY LICENSEE AS A RESULT OF USING, MODIFYING
+ * OR DISTRIBUTING THIS SOFTWARE OR ITS DERIVATIVES.  IN NO EVENT WILL
+ * SUN OR ITS LICENSORS BE LIABLE FOR ANY LOST REVENUE, PROFIT OR DATA,
+ * OR FOR DIRECT, INDIRECT, SPECIAL, CONSEQUENTIAL, INCIDENTAL OR
+ * PUNITIVE DAMAGES, HOWEVER CAUSED AND REGARDLESS OF THE THEORY OF
+ * LIABILITY, ARISING OUT OF THE USE OF OR INABILITY TO USE THIS SOFTWARE,
+ * EVEN IF SUN HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
+ */
+
+#include <unistd.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <syslog.h>
+#include <errno.h>
+#include <stdarg.h>
+#include <string.h>
+
+#include <ipmitool/log.h>
+
+struct logpriv_s {
+	char * name;
+	int daemon;
+	int level;
+};
+struct logpriv_s *logpriv;
+
+static void log_reinit(void)
+{
+	log_init(NULL, 0, 0);
+}
+
+void lprintf(int level, const char * format, ...)
+{
+	static char logmsg[LOG_MSG_LENGTH];
+	va_list vptr;
+
+	if (!logpriv)
+		log_reinit();
+
+	if (logpriv->level < level)
+		return;
+
+	va_start(vptr, format);
+	vsnprintf(logmsg, LOG_MSG_LENGTH, format, vptr);
+	va_end(vptr);
+
+	if (logpriv->daemon)
+		syslog(level, "%s", logmsg);
+	else
+		fprintf(stderr, "%s\r\n", logmsg);
+	return;
+}
+
+void lperror(int level, const char * format, ...)
+{
+	static char logmsg[LOG_MSG_LENGTH];
+	va_list vptr;
+
+	if (!logpriv)
+		log_reinit();
+
+	if (logpriv->level < level)
+		return;
+
+	va_start(vptr, format);
+	vsnprintf(logmsg, LOG_MSG_LENGTH, format, vptr);
+	va_end(vptr);
+
+	if (logpriv->daemon)
+		syslog(level, "%s: %s", logmsg, strerror(errno));
+	else
+		fprintf(stderr, "%s: %s\r\n", logmsg, strerror(errno));
+	return;
+}
+
+/* 
+ * open connection to syslog if daemon
+ */
+void log_init(const char * name, int isdaemon, int verbose)
+{
+	if (logpriv)
+		return;
+
+	logpriv = malloc(sizeof(*logpriv));
+	if (!logpriv)
+		return;
+
+	if (name != NULL)
+		logpriv->name = strdup(name);
+	else
+		logpriv->name = strdup(LOG_NAME_DEFAULT);
+
+	if (logpriv->name == NULL)
+		fprintf(stderr, "ipmitool: malloc failure\r\n");
+	
+	logpriv->daemon = isdaemon;
+	logpriv->level = verbose + LOG_NOTICE;
+
+	if (logpriv->daemon)
+		openlog(logpriv->name, LOG_CONS, LOG_LOCAL4);
+}
+
+/*
+ * stop syslog logging if daemon mode,
+ * free used memory that stored log service
+ */
+void log_halt(void)
+{
+	if (!logpriv)
+		return;
+
+	if (logpriv->name)
+		free(logpriv->name);
+
+	if (logpriv->daemon)
+		closelog();
+
+	free(logpriv);
+	logpriv = NULL;
+}
+
+int log_level_get(void)
+{
+	return logpriv->level;
+}
+
+void log_level_set(int level)
+{
+	logpriv->level = level;
+}
+

ipmitool/src/Makefile.am

@@ -27,34 +27,17 @@
 # PUNITIVE DAMAGES, HOWEVER CAUSED AND REGARDLESS OF THE THEORY OF
 # LIABILITY, ARISING OUT OF THE USE OF OR INABILITY TO USE THIS SOFTWARE,
 # EVEN IF SUN HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
-# 
-# You acknowledge that this software is not designed or intended for use
-# in the design, construction, operation or maintenance of any nuclear
-# facility.
 
 INCLUDES		= -I$(top_srcdir)/include
 SUBDIRS			= plugins
 
 MAINTAINERCLEANFILES	= Makefile.in
 
-if IPMIEVD
+ipmitool_SOURCES	= ipmitool.c ipmishell.c
+ipmitool_LDADD		= $(top_builddir)/lib/libipmitool.la plugins/libintf.la
 
-EXTRA_DIST		= bmcautoconf.sh
-bin_PROGRAMS		= ipmievd ipmitool
 ipmievd_SOURCES		= ipmievd.c
-ipmievd_LDADD		= $(top_srcdir)/lib/libipmitool.la
-ipmievd_LDFLAGS		= 
+ipmievd_LDADD		= $(top_builddir)/lib/libipmitool.la plugins/libintf.la
 
-else
-
-EXTRA_DIST		= bmcautoconf.sh ipmievd.c
 bin_PROGRAMS		= ipmitool
-
-endif
-
-ipmitool_SOURCES	= ipmitool.c
-ipmitool_LDADD		= $(top_srcdir)/lib/libipmitool.la
-ipmitool_LDFLAGS	= 
-
-bin_SCRIPTS		= bmcautoconf.sh
-
+sbin_PROGRAMS		= ipmievd